Outlook 2007/2010 with Exchange 2010 missing tasks operation has failed only on PC not OWA

We have searched this topic to no success I'm baffled as to how to resolve this problem.
End user software: Outlook 2007 and Outlook 2010,
Server side: MS Server 2012 R2 with MS Exchange 2010
Scenario: We have merged 2 forests together to a new forest. Months before hand had rolled out exchange 2010. A majority of users in
forest2 still are on Office 2007 where as users in
forest1 are nearly all on Office 2010.
Now so far we have 3 users (from Forest2) whom have reported 'missing tasks' with the message 'Operation has Failed' when attempting to view their tasks.
We have ran the outlook commands related to this type of issue that clear the reminders and resetting them with - No Success.
They have no issue when using OWA, or Outlook via mobile device. The issue only occurs on PC. We have tried profile rebuilds, fresh SOE, the issue appears to be resolved but the next time the user opens Outlook the problem comes back.
On the server we have ran all the integrity checks no corruption has been found in any way.

Hi,
I recommend that you try the following method on client PC and then check the result:
Click Start >> Click Run >> Type outlook.exe /resettodobar
>> Click OK.
Hope this helps!
Thanks.
Niko Cheng
TechNet Community Support

Similar Messages

Outlook 2007 compatiable with Exchange server 2013

Hi
I would like to ask, i have outlook 2007 and Exchange server 2013, when i configure outlook 2007, i fail to configuration, Is it outlook 2007 compaitable to exchange server 2013.

Yes, Outlook 2007 is supported. Make sure that the Outlook 2007 clients are fully updated. As a minimum, you need
SP3 for office 2007,
kb2687404 and
kb2768023.
Again, the best approach is to have all office 2007 updates installed.
Step by Step Screencasts and Video Tutorials

Best way to sync Outlook 2007 calendar with Exchange on SBS 2003

I currently have Vista and Outlook 2007.
My email, contacts and calendar are all in a OST file, which syncs to our Windows SBS 2003 server and the Exchange installed on it.
How should I configure my iPhone and iTunes, in order to have my calendar in iPhone?
After trying for several times to sync through iTunes without any success (could never have any items imported to the iPhone) I did create an Exchange account on my iPhone with the IP address of our SBS server, and my account details, and now all my items seem to appear (however they all have Accept/Maybe/Refuse buttons).
Is this the correct way? Will I get alarms for my appointments, even if I don't accept them on the iPhone?
Thank you!

OK, I think I figured it out, with Apple's iCloud instructions and a little help from campus tech support. This only applies to people using Outlook with Microsoft Exchange.
Enable iCloud on your computer (running Lion) and your iPhone. http://www.apple.com/icloud/setup/mac.html
Then go to your iPhone's Mail icon, click on Add Account > Microsoft Exchange and enter your login info.
Doing this transferred my work email and calendar to my phone wirelessly.

Outlook 2007-2010 keeps asking to login to exchange 2010 sp2

We Have Migrated our system from small business 2003 to small business 20011 using exchange 2010
there is varies versions outlooks working 2003/2007/20010 on windows XP and 7 workstations
Most are in the office on a 1 GB Lan but a number run across a software VPN
some not all Outlook 2007/2010 versions keeps asking to be login some regular, some only every couple hours
OWA works Fine no issues

Hey Alan
If you have enabled web-based publishing of your Offline Address Book (OAB) and your Outlook users get continuously prompted to enter their passwords, you need to check a couple of things:
Make sure Autodiscover is working perfectly before you made the OAB change.
Hold down the CTRL button and right click on the Outlook icon on the task bar, then select
Test Email Autoconfiguration. Unselect GuessSmart and Secure GuessSmart and keep
Use Autodiscover selected. On the Log tab, make sure Autodiscover is successful and that it was able to bind to an SCP.
Make sure that the autodiscover.domain.com entry is added to your certificate’s
Subject Alernative Names list.
If you are facing problems with Autodiscover, you should correct that first before attempting the steps mentioned below.
Make sure that you have defined the External and Internal URLs for the OAB virtual directory in your client access server.
Once you have made sure that Autodiscover is working OK, and that the credentials are being prompted for the OAB URL (and not the mailbox server), you need to check the IIS Authentication setting on the client access server.
On the Client Access Server running Windows Server 2008, open IIS Manager console.
Click on Default Web Site
Open Authentication
Note that only Anonymous Authentication is enabled. All other authentication methods should be disabled.
Temporarily enable Windows Authentication
Right click on Windows Authentication and choose Advanced Settings
Uncheck Enable Kernel Mode Authentication and click
OK
Disable Windows Authentication
Do an IISRESET
Also make sure that kernel-mode authentication is disabled for the RPC virtual directory.
Restart Outlook. You should no longer get the prompt for credentials. Test the configuration with Outlook Anywhere clients as well, if you have enabled Outlook Anywhere on your Client Access Servers.
You may need to repeat this configuration on all Client Access Servers that are enabled for Web-based publishing of Offline Address Book (OAB).
Syed MM Messaging SME - IBM || MCTS || MCSE || MCSA || VCP5 || VCA ||

Configuring Message Clasifications Exchange 2010 - Outlook 2007/2010/2013

Hi
I created Message Classification as described in:
http://technet.microsoft.com/en-us/library/bb123498(v=exchg.141).aspx
New-MessageClassification ....
New MessageClassification is visible in OWA.
I stared deploy Message Classifications for Outlook 2007 using this
http://technet.microsoft.com/en-us/library/aa998271(v=exchg.141).aspx
Of course there is small bug: "AdminClassificationPath"="c:\\Classifications.xml" but is should be
"AdminClassificationPath"="c:\Classifications.xml"
After set up it doesn't work. The same for Outlook 2010 and 2013?
Does anybody deploy Message Classifications for Outlook 2007 or 2010 or 2013 with success?
I use Exchange 2010 SP3 with all RU and Outlook 2007, 2010, 2013 with all updates.
Kind Regards Tomasz

Hi,
How do you know this is an old reoccurring message? Based on the content or time?
Since the MailboxAutoReplyConfiguration is correct, I suspect the issue can occur by certain client machine. At this stage, I suggest you disable OOF and re-enable
OOF on the problematic machine. If the issue persists, please refer to the following article to clean the problematic client’s Outlook rules. (run Outlook.exe /cleanrules in Run console.)
http://www.tech-recipes.com/rx/2161/outlook_2007_clean_up_command_line_switches/
Thanks.
Novak Wu
TechNet Subscriber Support in forum
If you have any feedback on our support, please contact
[email protected]
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

How do i connect manually to Exchange 2013 from Outlook 2007/2010 in another forest?

Hello All,
I have a source organization: Windows 2003 domain + Exchange 2010 SP3 + smtp domain acme.com
Target organization: Winows 2012 R2 domain + Exchange 2013 CU3 + smtp domain acme.com
We are migrating to target organization.
I want to connect Outlook 2007/2010 to their target mailbox (Exchange 2013) from a machine which is joined to Source DOmain.
I couldn't use autodiscover, because as the machine is joined to source domain, autodiscover it's mapping to Exchange 2010.
It only works when I machine is joined to target domain.
Any idea how to connect manually to eXCHANGE 2013 mailbox from a machine which is joined to source domain?
Regards
José Osorio

Hi,
Firstly, I’d like to explain, Autodiscover service can be used cross forest:
1. the two forests must be trusted.
2. configure a mail contact in the original forest.
For more information, please refer to the partition named how to configure the Autodiscover service for cross-forest moves in the following article:
http://technet.microsoft.com/en-us/library/jj591328(v=exchg.141).aspx#BKMK_ConfigureForCrossForestMoves
Thanks,
Angela Shi
TechNet Community Support

How to migrate Exchange HUB transport 2007 server with Exchange Hub transport 2010.

Hi,
How to migrate hub transport 2007 server with Exchange 2010 hub transport server.
Regards
Anil

Hi Anil
You do not do an in-place upgrade of Exchange - you build new Exchange 2010 Hub Transport Servers, you can utilize existing hardware by uninstalling and installing Exchange 2010 - but you must have Hub Transport Servers that match the Exchange version in
place for all Mailbox Servers that have the same Exchange version.
Essentially there must be Exchange 2007 Hub Transport servers in place whilst there are Exchange 2007 Mailbox servers.
Read "Upgrading from Exchange 2007 Transport -
http://technet.microsoft.com/en-us/library/dd346708%28v=exchg.141%29.aspx"
Exchange 2010 will synchronise certain configuration like Transport Rules and journaling when installing the first Exchange 2010 Hub Transport server, but from then on you must ensure synchronisation yourself.
Send Connectors and Recieve Connectors will need manual configuration.
Oliver
Oliver Moazzezi | Exchange MVP, MCSA:M, MCITP:Exchange 2010,Exchange 2013, BA (Hons) Anim | http://www.exchange2010.com | http://www.cobweb.com | http://twitter.com/OliverMoazzezi

Outlook 2007/2010 only prints to default printer

We use the following command to add network printers to XP PCs' (this saves each user of the PC having to find and install the network printer themselves)
rundll32 printui.dll,PrintUIEntry /ga /n\\machine\printer
This adds the printer for all users of the PC, however Outlook 2007/2010 only allows the user to print to the default printer, regardless of which printer the user selects.
When printing from Word/Excel or any other application the print goes to the selected printer.
Has anyone else had this problem, and found a solution, or know why Outlook only prints to default but other office applications print to other printers correctly ?
Thanks
Steve

I am having a similar issue to ferdz2013.
I am running terminal services on server 2008 R2. This is in a domain environment, the user has permissions to the color printer in question and can print to it using Word and notepad. However in Excel, it will not print to the color printer.
Even if I select the color printer as the default printer, it only prints to another BW printer. In fact, there are .......
Well, as I was writing this, after troubleshooting it for an hour, it fixed itself. I was going into his control panel to count the network printers installed (about 5) of which he could only choose from 2 in excel. Suddenly, he has only
two installed. We can print to it, but we can't choose color now.
I believe this is a domain controller issue, where he is attached to one DC, and I am attached to a second DC, where I change the AD permissions. It took an hour for them to exchange this information.
Just something else to think about.
Now I need to figure out why he can only select BW.

Thunderbird emails over to Outlook 2007/2010 How

I have 2 computers here in the office that have Thunderbird install on them and my boss would like for them to be transferred over to Outlook 2007/2010 with out any data loss. Every thing I have read has inform me that there could be some data loss.
Is there any way to do a complete data transfer without lossing any data to Outlook 2010 without using express.
John E. Donaldson

The easiest way is the baby step route-- at least you will not need to buy any software (or load any malware).
1. Get an IMAP email account somewhere. The only free version I know of is through Google, although if you have a web server somewhere you probably can get an IMAP account there. Set this IMAP account up on Outlook: it's easy to
do and both Google and Microsoft have help pages to walk you through it. If you need help, Bing or Google this subject, followed by either "site:google.com" or "site:microsoft.com" in the search box. Also, set this account up on your Thunderbird
mail client as well.
Now you should have both identical IMAP accounts set up, on Outlook and Thunderbird. Make sure you have sync'd both to the server when choosing options, so your client computer and server both mirror one another.
(Of course, if your Thunderbird account was an IMAP account to start with and not a POP account, you could avoid setting up another account and instead simply set that up on Outlook without any conversion, so I'm assuming you are inquiring about a
POP account in Thunderbird. If you have an IMAP account in Thunderbird sync'd to the server, all you would need to do is to set that account up in Outlook, and all your mail will show up by itself, after a pause).
2. In the POP Thunderbird account, just drag all your folders from your old account over to the new IMAP account, which also exists on Outlook. (I do this all the time by the way, move folders between various mail accounts that exist on
both clients.)
So now all your folders will show up in Outlook on your new IMAP account and can be dragged, copied, deleted to any other Outlook mail account. One caveat that people (me) sometimes overlook if new to IMAP: they still need to do .pst backups, even
though the server/client are sync'd. If one accidentally deletes a file or a folder, say from a Unix type system, or corrupts files by some other route, it can still be lost--so back-ups are very necessary.
Any address books in Thunderbird will need to be moved separately, in an exported file.
Hope this helps. I do stuff like this all the time by the way, it's helpful especially when I have to convert a very old program or 'can't get there from here,' to go to some intermediate destination.

Outlook 2007/2010 & iCloud Control Panel log in on a Windows 7 64 PC.

Keep getting the "This Apple ID is valid but is not an iCloud account" message when I try to log in via the
iCloud Control Panel, Outlook 2007/2010 can not find the servers, but logging in via web using Apple ID
[email protected] does work.
I realise I am not alone in having this or similar problems with the migration to iCloud, but has an answer
been found for the log in issue on a PC?

hi，
i have solved my issues with your answer on this page,thanks a lot.
but what's the different between
HKLM\SYSTEM\CurrentControlSet\Services\LanmanServer\Parameters\Size = 1
HKLM\SYSTEM\CurrentControlSet\Services\LanmanServer\Parameters\Size = 2
HKLM\SYSTEM\CurrentControlSet\Services\LanmanServer\Parameters\Size = 3

How to sync outlook 2007 calendar with Iphone 4?

How do I sync my outlook 2007 calendar with my iphone 4? It used to happen, now it won't work. Thank you.

Howdy there Connie,
If your Outlook 2007 is still not syncing to your phone I would like to recommend the following article to help you troubleshoot the Sync Services between your the two devices, named:
Troubleshooting Sync Services on Windows with Microsoft Outlook 2003, Outlook 2007, or Outlook 2010
First backup your data, THEN proceed with the articles troubleshooting step by step until it is resolved:
Back up your data
Refer to this Microsoft article for steps to back up the data in your PST file used by Microsoft Outlook 2003 or Microsoft Outlook 2007. This Microsoft article explains where the Microsoft Outlook 2010 data files are located.
For information about backing up the data in your OST file, contact your Exchange Administrator. Your OST file should be on the server and backed up when the server is backed up.
Before troubleshooting, it is recommended that you make a copy of your iPhone, iPad, or iPod touch backup in a safe place. For more information about where to find the backup and what information it contains, refer to About backups.
Thank you for using Apple Support Communities.
Cheers,
Sterling

Is Outlook 2007 compatible with Office 365?

Is Outlook 2007 compatible with Office 365? The Office 365 will be part of Windows 2012 Essentials.

As of the time I am writing this, outlook 2007 still works (but I can personally attest that the experience isn't great.) By the time you read this, that can change and it may not work anymore. Microsoft only guarantees compatibility wothnoffoce
products in mainstream support. So that is 2010 and 2013 (or 365 Pro Plus equivalents.) 2007 is only in extended support, so MS has no guarantees or obligation to maintain compatibility, and they *specifically* call out 2007 support in their supported client
documentation.
More info here:
http://office.microsoft.com/en-us/office365-suite-help/office-365-system-requirements-HA102817357.aspx

Using Outlook 2007 I want to receive emails on my iPhone 4 only when Outlook is NOT open on my computer, as when away from home or want to quickly check email when computer is not turned on. Either ALL emails come to my iPhone or none at all.

Using Outlook 2007 I want to receive emails on my iPhone 4 only when Outlook is NOT open on my computer, as when away from home or want to quickly check email when computer is not turned on. Either ALL emails come to my iPhone or none at all. Is the setting I need to change in Outlook or on the iPhone or is it somewhere else? I used to have this setting but transferring Outlook to a new laptop somehow turned it off.

No. You really can't do that. Not easily at any rate. You would have to set them both up to use POP3, but even then there is no way to guarantee that the phone won't poll the server prior to your computer doing so, pulling down the message from the server.

Error in upgrading SharePoint Server 2013 with SP1 : "Task upgradebootstrap has failed with an unknown exception"

I has successfully setup new Dev ENV of SarePoint server 2013 in VMware with 2 servers running om OS: win server 2008 R2 Ent SP1, AD + Central Admin Application Server.
After that the configuration of SharePoint App and WorkFlow Manager completed as well and many projects run perfectly,
And after installing SP1 of SharePoint server 2013, and running the SharePiont Configuration wizard to complete the configuration of the SharePoint Farm the Upgrade has fialed on Step2 with the following Error from the Log file:
Task upgradebootstrap has failed with an unknown exception
01/04/2015 00:43:30 11 ERR Exception: Microsoft.SharePoint.Upgrade.SPUpgradeException: Exception of type 'Microsoft.SharePoint.Upgrade.SPUpgradeException' was thrown.
at Microsoft.SharePoint.Upgrade.SPManager.BootStrap(Guid sessionId, SPUpgradeOperationFlags flags)
at Microsoft.SharePoint.PostSetupConfiguration.UpgradeBootstrapTask.Run()
at Microsoft.SharePoint.PostSetupConfiguration.TaskThread.ExecuteTask()
Also after that I was not able to create like before a new site , and this creating end with error message as follows:
Failed to call GetTypes on assembly Microsoft.Office.TranslationServices, Version=15.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c. Method not found: 'Microsoft.Office.Web.Common.ProcessImageInfo.
Is there any solution to my problem with SharePoint server 2013 SP1, this supposed not to cause any bug in stable environment.
Basel Badr ,SharePoint Specialist ,MCAD ,MCTS.

Hi Daniel,
Thanks for replying on my post, actually I have downloaded the kb2880552 sp1 for
enterprise edition from the link
https://support.microsoft.com/kb/2880552 , and this has been experienced with me before since I had my Standalone Dev machine first installation, and the issue only occurred when the SP1 installed though.
Anyway, I've tried to install CU Nov 2013 http://support.microsoft.com/kb/2889944
but still facing the same issue,
I run the Setup of SP2013 from the CD to repair the SharePoint and error message appears,
The issue related to "Microsoft.Office.TranslationServices" is also related to running
the repair successfully which leads to the same error message above.
The Version of SP 2013 from the program file is : 15.0.4571.1502
The Update snapshot is as below:
Is there a problem with my sharepoint media file?
Basel Badr ,SharePoint Specialist ,MCAD ,MCTS.

CS Bridge when opening file shows " Some Application Components are missing from Application Directory- Reinstall". Uninstalled with uninstaller, reinstalled from disc. Message continues only in Bridge not in PS. Please help.

CS Bridge when opening file shows " Some Application Components are missing from Application Directory- Reinstall". Uninstalled with uninstaller, reinstalled from disc. Message continues only in Bridge not in PS. Please help.

What version of Bridge and Photoshop and what platform? Mac or Windows? I can point you to a downloadable installer.
If the cdrom was damaged, it may be the problem.
You would uninstall and use the CC/CS Cleaner to remove any remnants before reinstalling.
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
I'll be gone for most of the day, but someone should be able to help you if you get stuck.
Gene

Outlook 2007/2010 with Exchange 2010 missing tasks operation has failed only on PC not OWA

Similar Messages

Maybe you are looking for