Outlook 2007 error 0x800CCC80 on Windows 8

Everything is working fine until this error came when i was checking my mails
Log onto incoming mail server (POP3): Outlook cannot connect to your incoming (POP3) e-mail server. If you continue to receive this message, contact your server administrator or Internet service provider (ISP).
Send test e-mail message: None of the authentication methods supported by this client are supported by your server.
Task '[email protected] - Sending' reported error (0x800CCC80) : 'None of the authentication methods supported by this client are supported by your server.'
Task '[email protected] - Receiving' reported error (0x80042108) : 'Outlook cannot connect to your incoming (POP3) e-mail server. If you continue to receive this message, contact your server administrator or Internet service provider (ISP).'
Please help me rectify this issue in a layman's term since I'm not that tech savvy and all. Appreciate the immediate feedback thank you!

I have the same problem

Similar Messages

Word 2007 and Outlook 2007 error 1605

Hi,
I keep getting this error with Word 2007 and Outlook 2007:
Microsoft Office word can't open thesaurus. Windows Installer error 1605.
Please advise on how to fix this.

Thank you. Thank you. Thank you. In all my searching for this problem, Yerger's was the only one that made much sense. And it worked! I no longer get an error when I open Outlook, and now I have my thesaurus back in Word!.
I suspect it will also fix the problem I was getting sometimes in Word that some kind of proofing tools were not available (although that was intermittent so I can't really tell for some time.)
Your solution was easy to follow and I like the explanation. I am usually suspicious of making changes to the registry based on an unknown person's suggestions. With this I could easily see that it was the relevant key.
For those not sure how to edit their registry: From the Start Menu, select Run, and type in regedit
Thanks!

Outlook 2007 PDF preview on Windows Server 2003?

Simple question. Does the new (Reader 8.1) PDF Preview feature for Outlook 2007 work in Windows Server 2003? Or is it only for XP and Vista? The patch notes strongly suggest the latter, but in other places (such as a blog on this site) there are notes explicitly stating that the feature should work in server operating systems.
We happen to be running Citrix (PS4.5) on this server as well, but I'm not convinced that's material: the feature doesn't work running Outlook on the server's own console.
When I attempt to preview a PDF in Outlook 2007, I am told, "This file cannot be previewed because of an error with the following previewer: Adobe PDF Preview Handler".
Before I go much farther with troubleshooting this, can anyone confirm firsthand that PDF previewing works in Outlook 2007 on Server 2003?

I was using Adobe Acrobat Professional 8.1.2 and Outlook 2007 on Server 2003 SP2 and the Adobe PDF Preview Handler worked.
Unfortunately, it stopped working after some time and I'm pretty sure I did not make any changes to the system. However, I did try to uninstall, reinstall and update Adobe Acrobat but still, it does not work.
Any ideas why this is happening how to resolve it?
Many thanks.

Outlook 2007 not opening after Windows Vista Update 25-Aug-09 [Qosmio G50]

I thought that posting my experience just now might be helpful to others.
Yesterday (25-Aug-2009) my Outlook 2007 was working perfectly. I had downloaded & installed Outlook Connector 12.1 because I'd received an e-mail from Microsoft to say that the DAV protocol used for HTTP mail would be withdrawn on 1-Sep-09. I also noticed that MS had restored the POP3 service that they closed down a couple of years ago.
So I set up the POP3 account and started working with that. All OK.
Last night when I closed down, Windows Update came in and completed on reboot this morning. Outlook 2007 wouldn't start, coming up with the message: +Cannot Start Microsoft Outlook. Cannot open the Outlook Window. The set of folders cannot be opened. The information store could not be opened.+.
Nothing I did in that environment would enable Outlook 2007 to load, I created a new profile and that did no good.
So I went back to the System Restore Point made at the time of installing the Outlook Connector and everything sprang to life.
I had also tried the restore point that undid the Windows Update, but that didn't cure the problem either.
So, I'll see what happens when I reboot next time in case it had nothing to do with Windows Update.
Cheers

There are many tools at the Inet, but no one of them weren't interested me, when I seeking for the solution of my trouble. Only my friend by chance offered me an one long-standing application. It enjoyed me for seconds, I presented my friend a gift and to my mind it would help in such problem also - pst email recovery.

Outlook 2007 error The form region DPOfcX

Hi Guys,
When I open Outlook 2007 or open an e-mail I am getting the following error.
The form region “DPOfcX” cannot be opened. The form region manifest specifies an add-in that is not installed.
I have check in the add-in there is no add-ins at all. I have check the exchange client extensions in there the add-in of nod32, exchange and SAP callender. in the disable add-in there is nothing.
When I start Outlook in safe mode the error don't show at all. What else I have done was to scan the computer with Spybot for malware. Nothing found. the computer is brand new got it on Saterday. When I search
the computer for the DPOfcx do not get any results. I have check in system 32 files and syswow64
Any help I will be greatfull!
regards,
Gerrit

Hi Gerrit,
HKCU\Software\Microsoft\Office\Outlook\FormRegions. Delete the registration for your entry for the MessageClass you are handling.
Removing an addin that way does not unregister it or its dependencies. You should uninstall or remove from Add/Remove Programs or Programs and Features in the Control Panel, or by re-running the installer
and selecting to remove the addin.
If the form region registration is created as part of the installation it should be removed by uninstalling. If it is created later after installation, say by code, you need code such as an installer custom
action to unregister the form region.
Hope that helps.

Outlook 2007 and 2010 on Windows XP keeps asking for password

I have a fresh installation of Exchange 2013 installed on Windows 2012 and the problem is that Outlook 2007 and 2010 which is installed on Windows XP keeps asking for password.
The problem occurs only on Windows XP while on Windows 7 is working fine.
Any help will be appreciated!

Hello
I had similar issue in my environment -Exchange 2010 SP2 UR4-v2 ,DAG 2 MBX servers(MBX1 and MBX2) in production site ,2 CAS in production site ,17 mail box databases , Public folder replicated to all the mailbox servers.
strangely users using outlook 2003 and outlook 2007 were being prompted for user name passwords.
investigations were done as follows
1. test connection status -click on the outlook icon in the lower right of the users desktop.clicked on test connection status ..
2. found that the username was being prompted while attempting to connect to the public folder in MBX1 server.
3. using EMC on the exchange server, changed databases pointing to public folder in MBX1 to public folder in MBX2. This solved the issue for us.however we were not sure of what the exact issue was ..was it public folder corruption in MBX1? .we found
that the users were being prompted for username and password only in outlook 2007 and not in OWA or outlook 2010. this made us rule out possibility of Public folder corruption in MBX1 server.
4.raised a case with microsoft to do a RCA (root cause analysis) . The resolution from them was to change the exchange RPC service on MBX1 from "network service" to "local account" and switch back to "network service".
The reason stated by microsoft is "password cache corruption" .Any ways the problem was solved at the server level.
Hope this helps all of you who have been scratching your head over this issue
Shiva

Outlook 2007 Error

Dear Sir,
Ive a problem in outlook 2007,
When im getting a excel file attached mail, I want to edit excel file, im not downloading the excel , im just opening it and editing, and im forwading it to another user, when that receiver is open the mail, he is getting 2 excel attachments, One is edited
one, Other one is Excel file Before edit Excel,
Pls help me .
Thanx
shyamal

Hi,
Please check the sent email in your Sent Items folder, how many attachments are displayed?
Double check if you have followed the steps below to forward the email, you need to do it in the right order:
1. Open the email with the Excel attachment.
2. Go to Other Actions -> Edit Message.
3. Open that Attachment -> When it asks Would you like to open the file or save it to your computer, click
Open.
4. Edit the Excel file -> Click the Save button -> Close the file.
5. Click Forward.
6. Select the recipients, edit the email as you want. You can also check how many attachments are displayed in the message.
7. Click Send.
If the problem persists after you follow my steps, try disabling all add-ins to check the result.
If you didn't do it as I described, you can let me know your process.
Regards,
Melon Chen
TechNet Community Support

Outlook 2007/2010 hangs on Windows 7

Hi all,
We are all of suddenn facing issue where Outlook hangs/freezes or stop responding while accessing the pst files over the network.
The machines are running on Windows 7 with either Outllok 2007/2010. Exchange server version used is 2003 Sp2 running on Windows Server 2003 R2 - Enterprise .
But if the .pst files are stored locally the Outlook works fine, they are currently stored on the file server.
I am unable to understand what could be the cause of the issue, machine is fully patched and also the same machine were working 3 months back. Only difference is now more machines are on Windows 7.
Can anyone pelase assist.
<st1:city w:st="on"><st1:place w:st="on"></st1:place></st1:city>
<st1:city w:st="on"><st1:place w:st="on"></st1:place></st1:city>
<st1:city w:st="on"><st1:place w:st="on"></st1:place></st1:city>
<st1:city w:st="on"><st1:place w:st="on"></st1:place></st1:city>
Regards, Shweta Karalkar

Hi,
As what ED says, there are some limits to using Network Stored PST files in Outlook. Please use the local PST file for Outlook using.
If there is a remote .pst file (over a network link), Outlook tries to use the file commands to read from the file or write to the file. However, the operating system must then send those commands over the network because the file is not located on the local
computer. This creates lots of overhead and increases the time that is required to read and write to the file. For more information about it, please refer to the following articles:
Limits to using personal folders (.pst) files over LAN and WAN links
http://support.microsoft.com/kb/297019/en-us
Network Stored PST files ... don't do it!
http://blogs.technet.com/b/askperf/archive/2007/01/21/network-stored-pst-files-don-t-do-it.aspx
Hope it helps.
Thanks,
Winnie Liang
TechNet Community Support

Emails wont send with outlook 2007

since yesterday i cannot send any emails via outlook 2007.
error message for default email address i get is
sending' reported error (0x800CCC61) your outgoing (SMTP) e-mail server has reported an internal error. if you continue to receive this message, contact your service administrator or internet service provider (ISP).the server responded: 522 IP FOUND IN DNSBL (please check for ip address listing on common DNS RBL services)
error message for other email address i get is
sending' reported error (0x800CCC0F) : the connection to the server was interrupted. if this problem continues, contact your service administrator or internet service provider (ISP). the server responded: 522 IP FOUND IN DNSBL (please check for ip address listing on common DNS RBL services)
any help appreciated

I had this from this morning. I solved my problem... it was down to my spam filter - Peerblock - blocking the company providing the new mail service. once i allowed Critical path inc ,after finding this on a google search,
During the summer the BT Yahoo! portal will close, but existing customers will still be able to access their BT Yahoo! Mail account by clicking on a link from BT.com. Later in the year, existing customers will be moved to BT Mail. Your inbox, including all your folders, will be moved over and you will keep the same email address, although you may be prompted to change your password.
BT has chosen a company called Critical Path to provide the BT Mail new email service.
We will be contacting all of our BT Yahoo! customers in the coming months to tell you what to expect before your email is switched to the new service. http://forums.thinkbroadband.com/bt/4242087-bt-changing-mail-supplier-from-yahoo-to-critical-path.ht...
My windows mail worked again.
welcome to the world of last wednesday week.
there's now't wrong with 2 cans and a piece of string. at certain times, it is often faster.

Outlook Sync Error SOLVED - Multi-day repeating appointment cannot be converted for use on the Handheld...

*UPDATE 1/23/2009 07:08 AM* This is a partial fix. I no longer think the Recurrence Range is the culprit. It seems the Time Zones features between Outlook & Palm are not cooperating. This explains why my 12 am events are syncing as 6 pm the day before; I live in GMT-6:00 so it's moving my events ahead by 6 hours. Another event I set for 1 pm in Outlook was changed to 7 am on my Treo. I am going to start over and recreate each event, this time setting the Time Zones, which I hadn't done before. I tested it out and it worked with a single event... let's see how long it lasts. I've also found that using 'No Time' on my Treo is not compatible with Outlook. It's better to set a time with 0 minutes duration.
*UPDATE 1/23/2009 04:11 AM* This is a partial fix. My monthly and yearly problematic recurring events are now showing up at 6 pm the day before on my Treo, though my Outlook calendar is fine. I think this has to do with the Recurrence Range Start/End in Outlook, which is set automatically. If only there were a way to change this...
After a WHOLE LOTTA trial-and-error (like 3 days worth), I think I finally solved my OLERR:14-001 issue!
Problem: Syncing Palm Treo 755p calendar with Outlook 2007
Error Message (simplified):
HotSync session completed with messages on [date] [time]
HotSync session started on [date] [time], and completed in [0] seconds
Outlook Calendar synchronization completed with messages
Duration: [0] seconds
Outlook Calendar
The multi-day repeating appointment titled [event] beginning [date] [time] cannot be converted for use on the Handheld. Please divide the appointment up into single-days and re-synchronize.
OLERR:14-0001
- Desktop overwrite HH Sync
Note: You will likely have several of these ‘Multi-day’ instances in your hotsync log (I had 58). You may want to change Calendar in hotsync to "Desktop overwrites Handheld" after you get this error, to avoid erasing events while you are fixing this issue. Otherwise, you may have to restore them from a backup copy (if you have one) and start over. You can switch back once you’re through.
Solution: First, I tried this Palm KB Article: http://kb.palm.com/SRVS/NUA/launchKB.asp?c=31167. After this didn’t work for me… I did trial-and-error. I believe the problem is that each recurring event, which you set up as ‘All-day’, must be changed to have a duration of 0 minutes from within Outlook. I was able to change some events directly, but I found that some of the records had corrupted, and would just revert. My fool-proof solution was to recreate EVERY problematic event (yes, one-by-one) using the following steps:
Open Outlook
Go to your default calendar, where your events are synced
In the top menu choose ‘View’ > ‘Current View’ > ‘Recurring Appointments’
Open a ‘New Appointment’
Enter subject and other options, such as Categorize, Importance, Time Zones, or Reminder
Make sure starting and ending date & time are the EXACT same
Select ‘Recurrence’ & choose your pattern
I did not choose ‘No end date’ (hence the Palm article), but rather ‘End by:’ and typed in 2031, then pressed tab to auto-generate a suitable end date. I chose 2031 because that is last year my Treo’s calendar goes to. Click OK
Repeat for every event in your error log, until you get a clean "Desktop overwrites Handheld" hotsync (Outlook should be closed when you sync)
Switch Calendar in hotsync back to "Synchronize"
Even though I still get the message OLERR14:001, my syncs are successful. Now I will give my Treo time to see if the issue returns later. Until then, happy Outlook syncing and good luck!
Post relates to: Treo 755p (Sprint)
Message Edited by akeaw3000 on 01-23-2009 04:11 AM
Message Edited by akeaw3000 on 01-23-2009 07:08 AM

hello,
if all of your data is on the phone you can change the sync action to handhled overwrites desktop
how to:
open palm desktop software
on the top left click on 'hotsync' and then 'custom'
on the calendar conduit
highlight it and click on 'change'
then choose 'handhled overwrites desktop'
hope this will help you
Post relates to: Palm TX

HT204053 how sync outlook 2007 with icloud?

how do I sync outlook 2007 on my (PC window 7) with icloud to appear on my mac and iphone.?

If you have Outlook 2007 or higher, set up iCloud on your PC as explained here: http://www.apple.com/icloud/setup/pc.html and enable syncing for contacts, calendars, etc. with Outlook
If you don't want to sync your PC with iCloud but only want to get your Outlook contacts in iCloud, create a Gmail account, then export your Outlook contacts to Gmail (see http://office.microsoft.com/en-us/outlook-help/export-your-contacts-from-outlook -and-use-them-in-google-gmail-HA104035604.aspx?CTT=1), then export the contacts from Gmail as a vCard (see https://support.google.com/mail/answer/24911?hl=en) and import it to iCloud (see http://support.apple.com/kb/PH3605).

Can you sync your I-phone 3S calendar with Microsoft Outlook 2007 calendar?

I would like to sync my home email account calendar with Microsoft Outlook 2007 with my I-phone 3GS. Is it possible to do this?
I could sync my work calendar with phone calendar. My employer used office 2010 Outlook. Not sure if that is the reason or is it something in my settings etc.
I'd appreciate any advice or tips on how to do this.
Thanks,
BoilerMike57

Hello BoilerMike57,
According to iOS: How to transfer or sync content to your computer (http://support.apple.com/kb/HT1296), you are able to use Outlook 2007 to sync your iPhone:
You can sync calendars with:
Microsoft Outlook 2003, Microsoft Outlook 2007, Microsoft Office 2010 (Windows XP, Windows Vista, or Windows 7)
If you are having trouble syncing your Outlook calendar with your iPhone, you can follow the steps in this article:
iPhone, iPad, iPod touch: Troubleshooting contact and calendar syncing via USB on Windows
http://support.apple.com/kb/HT1692
Thank you for posting in the Apple Support Communities.
Best,
Sheila M.

Can you sync the i-phone 4s with microsoft outlook 2007

can you sync the i-phone 4s with microsoft outlook 2007 on a Windows xp platform?

Hello BoilerMike57,
According to iOS: How to transfer or sync content to your computer (http://support.apple.com/kb/HT1296), you are able to use Outlook 2007 to sync your iPhone:
You can sync calendars with:
Microsoft Outlook 2003, Microsoft Outlook 2007, Microsoft Office 2010 (Windows XP, Windows Vista, or Windows 7)
If you are having trouble syncing your Outlook calendar with your iPhone, you can follow the steps in this article:
iPhone, iPad, iPod touch: Troubleshooting contact and calendar syncing via USB on Windows
http://support.apple.com/kb/HT1692
Thank you for posting in the Apple Support Communities.
Best,
Sheila M.

Microsoft Outlook 2007 send/receive error with windows 8.1

I do have an IDEAPAD LENOVO with windows 8.1
Today, i made some updates to my laptop/tablet, and i have problems with the send/receive error on my Microsoft Outlook 2007, before that it was working fine.
Someone in the community know how I can fix it.
Thank you,
Moky

Hi,
What's the error message content you got? Please provide us more information about this problem so that we can resolve it more efficiently.
Meanwhile, please refer to the following KB article and follow the steps to troubleshoot the issue:
http://support.microsoft.com/kb/813514/en-us
Hope it helps.
Regards,
Steve Fan
TechNet Community Support

I am running windows 7 and Outlook 2007, when I start Outlook an error box pops up that MobileMe services could not be started. HELP?

I am running windows 7 and Outlook 2007, after updating to the latest verision of iTunes (ver 11.1.4.62) I get a popup box that reports MobileMe services could nt be started. This happens twice, I click close and Outlook comes up. I did not have this issue before I updated iTunes.
Can anyone help?
Thanks,
Allen

MobileMe was discontinued at the end of June 2012. The control panel should be removed if still present. See HT2992: MobileMe: Uninstalling the MobileMe Control Panel for Windows for details.
tt2

Outlook 2007 error 0x800CCC80 on Windows 8

Similar Messages

Maybe you are looking for