Outlook 2007 not opening after Windows Vista Update 25-Aug-09 [Qosmio G50]

I thought that posting my experience just now might be helpful to others.
Yesterday (25-Aug-2009) my Outlook 2007 was working perfectly. I had downloaded & installed Outlook Connector 12.1 because I'd received an e-mail from Microsoft to say that the DAV protocol used for HTTP mail would be withdrawn on 1-Sep-09. I also noticed that MS had restored the POP3 service that they closed down a couple of years ago.
So I set up the POP3 account and started working with that. All OK.
Last night when I closed down, Windows Update came in and completed on reboot this morning. Outlook 2007 wouldn't start, coming up with the message: +Cannot Start Microsoft Outlook. Cannot open the Outlook Window. The set of folders cannot be opened. The information store could not be opened.+.
Nothing I did in that environment would enable Outlook 2007 to load, I created a new profile and that did no good.
So I went back to the System Restore Point made at the time of installing the Outlook Connector and everything sprang to life.
I had also tried the restore point that undid the Windows Update, but that didn't cure the problem either.
So, I'll see what happens when I reboot next time in case it had nothing to do with Windows Update.
Cheers

There are many tools at the Inet, but no one of them weren't interested me, when I seeking for the solution of my trouble. Only my friend by chance offered me an one long-standing application. It enjoyed me for seconds, I presented my friend a gift and to my mind it would help in such problem also - pst email recovery.

Similar Messages

Firefox does not open after Windows 7 updates

After Windows 7 updates installed, Firefox 4.0.1 refuses to start. I click on the shortcut, the hourglass (blue circle in Windows 7) pops up for a couple of seconds, then it goes away, and no Firefox.
Chrome and IE work fine.
I have followed the tips on the "Firefox won't start" pages.
In Task Manager, there is a 4,796k Firefox process, which I then end. If I attempt to start Firefox multiple times, I get different processes in Task Manager, of different sizes.
I removed and re-installed Firefox 4.0.1. It made no difference. I even chose to have it delete all my customizations. No luck.
I cannot start Firefox in Safe Mode. When I try, the same thing happens (hourglass, then nothing)
I cannot start the Profile Manager. I created a new user in Windows, logged in as that user, and tried starting Firefox, but the same thing happened. This leads me to believe that it is not a profile issue.
I do not get a crash report.
Thank you for your help!

Which Windows 7 updates were installed? Were these rated as "Critical"?
Microsoft usually releases updates on 'Patch Tuesday' which always takes place on the second Tuesday of the month. That won't take place for another two weeks yet. I'm not aware of any out-of-band updates.

Photoshop CS5 and CS6 not opening after Windows 7 update

Hi there!
I have my Mac on repair so I have to use Photoshop on a very old Windows 7 laptop of mine (the first PS licence I bought was for PS CS4 Win then extended to CS5 during grace period)
It always worked fine (slow but fine ) since today. I was updating a couple of softwares (Intuos + Spyderpro) and I have been asked to restart my computer to make the updates effective. I've noticed that Windows during the restart was updating itself as well and I said "well, ok!" and let it go. But once my computer had restarted I couldn't open PS CS5 anymore. Desperate I went to the Adobe trial pages and downloaded CS6 but it doesn't work as well. I tried to repair some log errors via CC cleaner and delete PS preferences from its folder but no luck. I don't know what else to do. Bridge works fine. I don't understand what happened and how to solve it.

Hi Valeria,
My first inclination was to recommend just reinstalling, but since you said you did a new install of CS6 and that isn't working either I'm not sure if that would help. The user preferences was also a great thing to try.
These might be some other general suggestions for good next steps:
- Try launching with right-click Run as Administrator
- Create a new administrative account, log out of your current one, and attempt launching from there
- See if you get the same behavior if launching while in a Selective Startup
http://windows.microsoft.com/en-us/windows/run-selective-startup-system-configuration#1TC= windows-7
- Uninstall any changes you made since it stopped working, you should be able to uninstall the Windows update from within Programs and Features, uninstall the Intuos + Spyderpro temporarily to rule them out
Hope that helps,
- Dave

My itunes will not open in Windows Vista, I have tried everything suggested on the apple website, there is some type of plug-in issue..can someone please help me?

Hello,
I need help! My itunes will not open in Windows Vista. I have tried everything suggested by the apple website. Even when I open itunes in safe mode, it still will not allow me to continue. I am assuming when it says something about Plug-ins that has something to do with the problem. Can anyone help me?

Thanks King_Penguin for taking time to read and reply.
I just purchased this movie on Thursday, May 15, so just a few days ago. I have never had any trouble whatsoever since I have been in Vietnam. I have downloaded several movies and even music and they have all synced to my respected Apple products except for this purchase.
Sorry, I don't quite understand what you mean by studios and different versions. Could you please explain?
I checked my purchased list in my purchase history under my account and there are no hidden items.

HT2693 My Pages App will not open after I recently updated it. I'm afraid to lose all my docs if I delete the App and re-install.

My Pages App will not open after I recently updated it. I'm afraid to lose all my docs if I delete the App and re-install.

First of all - you are running the proper iOS in order to use the latest version of Pages - correct? You need iOS 6 now.
If so ....See if this helps. Maybe Pages will open after you try this.
Quit the Pages app completely and restart the iPad. Go to the home screen first by tapping the home button. Double tap the home button and the task bar will appear with all of your recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button or anywhere above the task bar. Restart the iPad.
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Or ..... Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
If that didn't help backup and send your files into iTunes with file sharing.
You could lose all of your files if you delete and reinstall the app. That is precisely why you should backup your iPad and send your files into iTunes using files sharing on the iPad. Do you backup or use file sharing?
Backup your iPad, send the files from the iPad into iTunes using file sharing and then delete the app and reinstall it.
Start here ..... How to backup and restore from a backup
http://support.apple.com/kb/HT1766
iOS: About file sharing.
http://support.apple.com/kb/HT4094

T61 no sound after Windows (Vista) update (?)

I have purchased a T61 in December 2007. The sound has always been low and now i have no sound at all. I cannot hear files locally or on the Net -- or any of the computer sounds.
i realize now that it has happened after a Windows (Vista) update. I have done every step but 6.
I have Speakers (SoundMax Integrated Digital HD Audio). The sound keeps defaulting to to Line 2 Muv Enum (Virtual Cable).
http://support.microsoft.com/kb/948481
>> Update -- perhaps this will help someone else. After doing steps 1-5 (at support link), I redid step #3 and now it's working.
Message Edited by Suntea on 06-27-2008 12:50 PM

I have purchased a T61 in December 2007. The sound has always been low and now i have no sound at all. I cannot hear files locally or on the Net -- or any of the computer sounds.
i realize now that it has happened after a Windows (Vista) update. I have done every step but 6.
I have Speakers (SoundMax Integrated Digital HD Audio). The sound keeps defaulting to to Line 2 Muv Enum (Virtual Cable).
http://support.microsoft.com/kb/948481
>> Update -- perhaps this will help someone else. After doing steps 1-5 (at support link), I redid step #3 and now it's working.
Message Edited by Suntea on 06-27-2008 12:50 PM

Satellite A205-S4607 doesn't start after windows vista update

Hello,
I was installing windows vista updates, but the battery was low and the computer turned off, then, the computer doesn´t start, only the hard disc led is light but the screen is black, please can you help me?
The model is Satellite A205 -S4607

Thanks for your advice, but the problem is very complicate, the computer doesn't boot up, only the led te HD is ligthing, I removed the HD and the memory but doesn't work, I've read that the problem could be the bios, and the recomendation is remove the battery of the board to reset the bios, but I think it is very dangerous.
Message was edited by: Nvillegas

Outlook 2013 does not open after Windows / updates

Hi,
I had installed Office 2013 on my Windows PC. I got updates for Office 2013 and after that my Outlook stoped working. It did not open except in safe mode. I checked similar problems and tried to remove add ins in safe mode but still does not work. Tried
to create new profile no success. Then I tried to re install it yesterday and it worked fine until I got updates again today and it stops open again.
Is something wrong with Office 2013 updates?
Any suggestion/solutions to fix this problem.
Chagi

Hi,
Since Outlook works fine in safe mode, you can also try to open Outlook with
/safe:1 and /safe:3 commands to narrow down the cause.
/safe:1 Starts Outlook with the Reading Pane off.
/safe:3 Both native and managed Component Object Model (COM) add-ins are turned off.
Please also try to open Outlook with /resetnavpane command to check if this issue is caused by corrupted Navigation Pane settings. To do this, press Windows key + R to open the Run command, type
outlook.exe /resetnavpane and press Enter.
If above not working, please try to use the Inbox Repair Tool to scan and repair your Outlook data file errors to check the result. See:
http://office.microsoft.com/en-in/outlook-help/repair-outlook-data-files-pst-and-ost-HA102749454.aspx?CTT=1
In addition, you can try to uninstall these updates to check if Outlook will work, so that we can determine if this issue is caused by released updates.
Best Regards,
Steve Fan
TechNet Community Support

Itunes not opening after Windows Update

I am aware that a post was made recently that was very similar to this one, but my problem is different enough that i deemed it necessary to make my own topic)
Ever since I downloaded the new Itunes 10, everytime I have had a Windows update (I am using Windows 7), Itunes will not open. When i double click it, the mouse shows the "loading" cursor but the program does not work. This has happened two times before, and each time i had to uninstall Itunes as well as Quicktime, and then re-install both of them.
I would like to be able to update Windows without Itunes dying on me, so are there any other ways to get it to work? Any help is very appreciated.

oh my gawd
Brallen91,
thank you so SO much for providing that link!
been stuck with that problem for days; tried uninstalling, removing, reinstalling, all the things. also deleted my preference files in ~/Library/Preferences/ like a thousand times etc.
all I missed was that there also are two files in ~/Library/Preferences/ByHost/ too; I deleted those, restarted; woosh, iTunes is finally back! *dances through the entire house*
thanks a ton man <3

ITunes will not open on Windows Vista after upgrading to new version

After installing the latest version, my iTunes will not open. I have uninstall and reinstall two times and still nothing, any suggestions or tips?

King Penguin set you on the right track. It's probably security software not recognizing the new version of itunes, and blocking it.
http://support.apple.com/kb/TS3125

Cisco VPN Client after Windows Vista Update (KB941229)

I had the Cisco VPN client 5 installed on my laptop and configured by the IT department at work. It was working fine all day until I restarted and KB941229 was automatically installed. When it turned back on the Cisco VPN service (CVPND) would attempt to run then stop. If I started it manually it would run for about a minute then stop again. Without the service running the VPN client won't open, let alone let me connect.
I know this vista update is fairly recent so I'm not sure there will be a fix but maybe somebody can think of a workaround or some way to fix this situation.
Things I've tried:
1) Uninstalling the windows update
2) restarting
3) restarting (in denial that this was happening)
4) configuring a vista VPN connection to attempt to connect to the company VPN (this failed too)
Uninstalling the update caused me to be unable to ping for some reason. This meant the VPN client would run but be unable to connect to the server and yet I was entirely able to access the internet locally. I reinstalled the update assuming maybe the installation went badly but that caused the same problem with the VPN service stopping itself (or being stopped) after a minute.

Hello
my issue has been resolved.
there is a service called Base Filtering Services running in background for Vista and has to disabled to make IP Sec VPN Client working.
after doing so it works smoothly.
- Dhaval Tandel

Master Collection fails to start after Windows Vista update

Last night, Automatic Update patched my machine and restarted. This morning, I find that all my CS3 apps (from Master Collection) will not start. Every app presents me with the "Adobe ________ .exe has stopped working." Has anyone else experienced this? Thanks!
Vista Ultimate x64
Intel Core2 Duo 2.66GHz
8GB RAM
Angry
-Andrew

Hi all, just ran into the same issue after Service Pack 1 for Vista. Here's the solution:
If you are getting a message about the BRS pencil tool when launching Illustrator and you are using Windows Vista or XP, you may be missing an important font.
For Vista users you are missing the Segoe-UI font. For XP users
you are missing the Tahoma font. These fonts need to be installed on
your system in order for Illustrator, Flash, Photoshop and InDesign to
launch. Most of the other applications will give you a generic
"application has stopped working" error when trying to launch.
Also,another clue is located inside the Event Viewer. For vista users, click on your start button and in the search area type "event", the event viewer will show in the results area, click on it and then click on "windows logs", then click on "application". For XP users, click Start, then Run and type "eventvwr" and hit enter, then click on
"Application". By double-clicking on an error you will see the
description for the problem. If the faulting module shows AdobeOwl.dll, you are most likely missing the font. You can do a google search for the font and they are available for download.
So far I have not found a solution for a mac. The documents referencing these errors are kb402311 and 331889

Itunes will not open in Windows Vista 32 Bit.

I am running Windows Vista 32 bit, I have just installed the latest version of Itunes, which installs, when I go to open Itunes, I get an error message, ' MSVCR80.dll was not found. Re-installing the app may fix the problem.' I have triedd re-installing Itunes, same error message, I have also tried deleteing Itunes and installing an older version, still I get the same error message !
Any help in this matter would be greatly appreicated, thks.

Follow the directions of tt2 in: https://discussions.apple.com/thread/5822086

File Vault will not open after Safari/ITunes update

I just ran an update for Safari, ITunes, and Security, and after restart, I get the following after entering my password: "Your FileVault-Protected home folder did not open, and needs to be repaired. Click ok to repair, or cancel to cancel login"
Obviously, I clicked "Ok" to repair. and I got this message: "you are unable to log in to the user account XXXXX at this time. Logging in to the account failed because an error occurred"
And that's ALL it does.
Any suggestions?

I had the EXACT same thing happen. I ran those three updates, restarted and got the message you did. I talked to a 1-800 tech then had an appointment at the local Genius Bar today. They told me in order to recover the files in my user folder I will have to connect to another Mac HD via firewire and access the user folder by entering my FileVault password. Trouble is .... I don't have a Filevault password. I never set it up for fear I wouldn't remember the password and get locked out of my computer. Well, looks like Apple did it to me in spite of my best intentions.

Portege Z830 - Wireless is not workng after Windows 7 update

Morning,
Two days ago I've installed a Windows 7 update from Qualcomm Atheros and my Wireless just died immediately after. This update is not on the list of updates and I cannot uninstall it.
Any solutions guys?
Help aprreciated in advance.
Thanks

Have you tried to roll back OS few days back before you have installed this update?
You can do this with system restore option.
I don't know if this will help but you can try it anyway.

Outlook 2007 not opening after Windows Vista Update 25-Aug-09 [Qosmio G50]

Similar Messages

Maybe you are looking for