Outlook 2010/2013 not able to connect to Exchange 2013
Hi, I'm the midst of co-exist between Exchange 2010/2013. I have issues where none of internal users that migrated to Exchange 2013 not able to connect via Outlook 2010/2013. OWA is running fine without issue. Using MCA, the issue due to port is blocked
but I have verified that firewall on Exchange 2013 server is turn off all.
1. Exchange 2010/2013 cert is using public CA cert.
2. Both outlook anywhere external URL for Exchange2010/2013 is set to outlook.domain.com. internal pointing to server.domain.com. while autodiscover is set to autodiscover.domain.com.
3. user mailbox in exchange 2010 do not have any issue
while if I try to logon, the error look like below:
Cannot open your default e-mail forlders. You must connect to microsoft exchange with the current profile before you can synchronuze your folder with your outlook data file (.ost).
what else should I check ?
many thanks.
Hello,
What server does “outlook.domain.com” and “autodiscover.domain.com” point to, Exchange 2013 FE or 2010 CAS?
You can also do a Outlook Test Email AutoConfiguration by the following steps:
a. While Outlook is running, click the CTRL key and then right-click the Outlook icon in the system tray and then select “Test Email Autoconfiguration”.
b. Confirm that your email address is in the address field, uncheck “Use Guessmart” and “secure Guessmart authentication” boxes. Then click the “Test” button.
Thanks,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Simon Wu
TechNet Community Support
Similar Messages
-
Outlook 2010 prompt for credential when connecting to Exchange 2013 mailbox
I have 4 server Exchange 2010 with DAG and one server Exchange 2013, i've migrated some mailbox to the new 2013 server.
I'm having a problem with some Outlook 2010 that sometimes (not always) requires credential to connect to mailbox in a server Exchange 2013, but only
when Cache mode is enabled.
The client ask for credential and dont connect to mailbox until I change in online mode.
In Online Mode, everything works fine.
I don't have Public Folders, so the check box Download Public Folder is not selected and the authentication mode is "Negotiate".
Thanks in advance.
ElisaHi,
As far as I know, by default, shared mail folders not public folders are downloaded in Cached mode in Outlook 2010 and Outlook 2013:
http://support.microsoft.com/kb/982697/en-us
Please check if there is shared folder in the problematic Outlook 2010 client and try to check if the issue still exists with the same account on other Outlook client.
Best regards,
Angela Shi
TechNet Community Support -
Outlook Calendar invite - Not able to send from exchange server.
Hi,
I am not able to send outlook calendar invite from exchange server. But if i installed outlook on my local machine/server it works fine. Below code the i used to build calendar invite for your reference.
public static void sendOutlookInvitationViaICSFile1(EAppointmentMail objApptEmail)
try
log.Info("Invite Started");
Microsoft.Office.Interop.Outlook.Application apptApp = new Microsoft.Office.Interop.Outlook.Application();
Microsoft.Office.Interop.Outlook.AppointmentItem agendaMeeting = apptApp.CreateItem(Microsoft.Office.Interop.Outlook.OlItemType.olAppointmentItem);
DateTime venueDate = Convert.ToDateTime(objApptEmail.VenueDate);
string formatedVenueDate = venueDate.Year.ToString() + "/" + venueDate.Month.ToString() + "/" + venueDate.Day.ToString();
DateTime from = Convert.ToDateTime(formatedVenueDate + " " + objApptEmail.FromTime);
DateTime to = Convert.ToDateTime(formatedVenueDate + " " + objApptEmail.ToTime);
System.Net.Mime.ContentType typeHTML = new System.Net.Mime.ContentType("text/html");
//Create the Body in HTML format
string strBodyText = "Type:Single Meeting\r\nOrganizer: {0}\r\nStart Time:{1}\r\nEnd Time:{2}\r\nTime Zone:{3}\r\nLocation: {4}\r\n\r\n\r\n\r\n{5}";
strBodyText = string.Format(strBodyText, objApptEmail.Email, from.ToLongDateString() + " " + from.ToLongTimeString(),
to + " " + to, System.TimeZone.CurrentTimeZone.StandardName,
objApptEmail.Location, objApptEmail.Body);
if (agendaMeeting != null)
Console.WriteLine("started");
agendaMeeting.MeetingStatus =
Microsoft.Office.Interop.Outlook.OlMeetingStatus.olMeeting;
agendaMeeting.Location = objApptEmail.Location;
agendaMeeting.Subject = objApptEmail.Subject;
agendaMeeting.Body = strBodyText;
agendaMeeting.Start = from;
agendaMeeting.End = to;
Microsoft.Office.Interop.Outlook.Recipient recipient = agendaMeeting.Recipients.Add(objApptEmail.Email);
recipient.Type = (int)Microsoft.Office.Interop.Outlook.OlMeetingRecipientType.olRequired;
((Microsoft.Office.Interop.Outlook._AppointmentItem)agendaMeeting).Send();
log.Info("Invite Successfully End");
Console.WriteLine("End");
catch (Exception ex)
log.Info("Error: " + ex.Message.ToString());
Console.WriteLine("Error: " + ex.Message.ToString());
In exchange server/ not outlook installed server, i am getting below error.
"Retrieving the COM class factory for component with CLSID {0006F03A-0000-0000-C000-000000000046} failed due to the following error: 80040154 Class not registered (Exception from HRESULT: 0x80040154 (REGDB_E_CLASSNOTREG))"
Help me to send calendar invite without installing outlook on the specified server. Please do the needful.Hi
It is probably that the stuff you doing is for outlook and because outlook is not installed it cannot find the classes.
Hope this helps. Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. -
Outlook 2010 user not able to download images
I have a user that claims he was able to receive email from a certain sender and was able to click download images and everything worked fine. He said that one day he click something in the download images area and wasn't paying attention and now
he can no longer download images from this sender. The messages up top says "If there are problems with how this message is displayed, click here to view in a web browser" When I click it view in browser is the only option (the message looks fine
in the browser). The images below are blank but show "The linked image cannot be displayed. The" and the rest of the message is cut off. I can not find any settings showing that anything is blocked. I have tried giving him a new profile
and uninstalling and reinstalling office. I checked for blocked user and added this sender to the safe sender list. I also tried clearing and moving his temp folder. All other senders the images work properly. When I receive
images from this sender it works properly. I feel a setting was changed for his account in Exchange. We are running Exchange 2007. Has anyone faced this problem and know how to fix it?Can he see the images in OWA?
As Fred says, have him try another PC as well.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer
My Blog: http://unlockpowershell.wordpress.com
My Book:
Windows PowerShell 2.0 Bible
My E-mail: -join ("6B61726C6D69747363686B65406D742E6E6574"-split"(?<=\G.{2})",19|%{[char][int]"0x$_"}) -
Outlook 2010 doesn't automatically re-connect after Exchange Server reboot - help
We have recently upgraded from Exch 2003 to Exch 2010. We also upgraded our users Outlook client from 2003 to 2010. Now when an Exch 2010 server is rebooted Outlook does not re-connect automatically. You have to close Outlook and re-open
it and it starts working again. Others have reported the same issue. Outlooks shows the status in the status bar area as password is required. I have read an article in the forums about it being an authentication problem. What
changes can I make in Outlook or to Exchange 2010 to make Outlook automatically reconnect after an Exchange server reboot. thanksThey connect internally in the LAN with their domain credentials.
I haven't noticed any errors in the Exchange server related to this issue but I have not really looked in the logs right after this happens.
I guess I just don't understand how when we were running Exch2003 with Outlook2003 we did not have this problem. Now that we have spent all this money and upgraded to bigger, better, smarter software we are having a problem like this. It seems like
if Outlook senses the lost connection and transfers to Offline that it would keep periodically to see if the email server is back up and reconnect.
Sorry for the delay response.
I would suggestyou create a new Windows profile and test it again. Some times the windows profile curropted and woithout being able to provide credentials.
Hope it is helpful.
Fiona Liao
TechNet Community Support -
Clients not able to connect to MS exchange server over a cisco switch
Hello,
I have a Cisco L3 switch.
I have a Exchange server and until i split the network into every thing was working ok, meaning the clients can connect to the Exchange without issues.
But after i split the network into 2 vlans, moving the exchange in one vlan and the clients in another vlan, i have complains saying that the users are not able to connect to exchange periodically.
Even users from the same subnet also cannot connect to the exchange often.
Meaning the clients can connect to the exchange and suddenly it will stop working. at the same time i can ping the exchange and that shows there is no routing issue or LAN issue.
But still clients cant connect to the exchange, when i reboot it will start working again for some time.
wondering whether it could be related to any network related issue or MTU or PMTUD issues.
The whole issue started only after we split the network into two vlans.If you have physical access to the switch, it may save time to look at the port LEDs which give you the link status or may indicate an error condition (if red or orange). The table below describes the LED status indicators for Ethernet modules or fixed-configuration switches:
http://www.cisco.com/en/US/customer/products/hw/switches/ps700/products_tech_note09186a008015bfd6.shtml -
Unable to connect to Exchange 2013 using Outlook 2010/2013 with latest patch
Dear All,
I'm setting up Exchange 2013 CU2 coexist with Exchange 2010 SP3. Since we are still planning and testing, the internet is still pointing to 2010 for send/receive mails.
The 2013 environment are:-
2 X CAS server with MS NLB configured
2X MBX server with DA
Internal NLB/licent access: excas2013.int.my.domain
External access (current set on 2010 as well): webmail.my.domain
Certificate with valid subject name has been import to 2013 and 2010:
CN: webmail.mydomain
SAN: excas2013.int.my.domain
SAN: excas.int.my.domain (for 2010)
I am able to connect to my Exchange 2010 user thru 2013 CAS server and proxy to exhcnage 2010 by outlook. However, I cannot connect to Exchange 2013 user by outlook. During mail profile create of Exchange 2013 user by autodiscover (pointed to exchange 2013),
the process looks good:-
Establish network connection (checked)
Searching for [email protected] server settings (checked)
Log on to server
The process stop at "Log on to server" and a windows prompt, saying:
The action cannot be completed. The connection to Microsoft Exchange is unavailable. Outlook must be online or connected to complete this action.
Clicked OK, I can see:-
MS Exchange Server:
[email protected]
Mailbox:
=SMPT:[email protected]
WHen I click "Check Name", it said The name cannot be resolved.
I have no idea of what is going on. Just want some help~I have checked the iis log:-
2013-09-23 06:58:29 10.144.144.71 POST /autodiscover/autodiscover.xml &cafeReqId=99ed5467-a294-481c-95eb-9b21d6530404; 443 mydomain\training101 10.144.85.4 Microsoft+Office/14.0+(Windows+NT+6.1;+Microsoft+Outlook+14.0.7106;+Pro) 200 0 0 8018
2013-09-23 06:58:29 10.144.144.71 RPC_IN_DATA /rpc/rpcproxy.dll [email protected]:6002&RequestId=f4652a19-2e8e-4652-a007-0cf0b7fb792e&cafeReqId=f4652a19-2e8e-4652-a007-0cf0b7fb792e; 443 - 10.144.85.4 MSRPC 401 1 2148074254
0
2013-09-23 06:58:29 10.144.144.71 RPC_OUT_DATA /rpc/rpcproxy.dll [email protected]:6002&RequestId=c48cda77-6008-423b-8e8b-d6d40f4d1b39&cafeReqId=c48cda77-6008-423b-8e8b-d6d40f4d1b39; 443 - 10.144.85.4 MSRPC 401 1 2148074254
0
2013-09-23 06:58:29 10.144.144.71 RPC_IN_DATA /rpc/rpcproxy.dll [email protected]:6002&RequestId=033f1ce4-43ba-49b1-b226-f4cc357e7702&cafeReqId=033f1ce4-43ba-49b1-b226-f4cc357e7702; 443 - 10.144.85.4 MSRPC 401 1 2148074252
15
2013-09-23 06:58:29 10.144.144.71 RPC_OUT_DATA /rpc/rpcproxy.dll [email protected]:6002&RequestId=d2424d25-ca9e-4867-922f-e527b041d9db&cafeReqId=d2424d25-ca9e-4867-922f-e527b041d9db; 443 - 10.144.85.4 MSRPC 401 1 64 0
2013-09-23 06:58:31 10.144.144.73 POST /autodiscover/autodiscover.xml &cafeReqId=ff35f49b-e418-4d55-b66c-dbae509cc12f; 443 - 10.144.92.17 Microsoft+Office/12.0+(Windows+NT+5.1;+Microsoft+Office+Outlook+12.0.6662;+Pro) 401 1 2148074254 0
2013-09-23 06:58:31 10.144.144.73 POST /autodiscover/autodiscover.xml &cafeReqId=033f8ed6-d7ce-41b2-8ed2-e275e22e53be; 443 mydomain\tkchung 10.144.92.17 Microsoft+Office/12.0+(Windows+NT+5.1;+Microsoft+Office+Outlook+12.0.6662;+Pro) 200 0 64 15
2013-09-23 06:58:37 10.144.144.71 POST /powershell serializationLevel=Full;ExchClientVer=15.0.712.24;clientApplication=ManagementShell;TargetServer=;PSVersion=3.0&sessionID=Version_15.0_(Build_711.24)=rJqNiZqNgbqnsr3Py9GWkYvRlZqc0ZyQkoHOxsvOxsbJzczNgcbQzczQzc/OzN/Ixc/KxczI376y&cafeReqId=5350aa81-6668-489e-b099-3b3647115f10;
80 mydomain\Administrator 10.144.144.71 Microsoft+WinRM+Client 500 0 0 180040
2013-09-23 06:58:46 10.144.144.71 RPC_IN_DATA /rpc/rpcproxy.dll [email protected]:6002&RequestId=f961c596-efff-4696-9188-611a0d151601&cafeReqId=f961c596-efff-4696-9188-611a0d151601; 443 - 10.144.85.4 MSRPC 401 1 2148074254
0
2013-09-23 06:58:46 10.144.144.71 RPC_OUT_DATA /rpc/rpcproxy.dll [email protected]:6002&RequestId=753d8852-ce19-459c-ac78-849c3e51e0a1&cafeReqId=753d8852-ce19-459c-ac78-849c3e51e0a1; 443 - 10.144.85.4 MSRPC 401 1 2148074254
15
2013-09-23 06:58:46 10.144.144.71 RPC_OUT_DATA /rpc/rpcproxy.dll [email protected]:6002&RequestId=c9e86049-c883-4b03-8546-143909361a80&cafeReqId=c9e86049-c883-4b03-8546-143909361a80; 443 mydomain\training101 10.144.85.4
MSRPC 404 0 64 78
2013-09-23 06:58:46 10.144.144.71 RPC_IN_DATA /rpc/rpcproxy.dll [email protected]:6002&RequestId=327ace4c-b2c8-44c1-95ba-7871727f60ef&cafeReqId=327ace4c-b2c8-44c1-95ba-7871727f60ef; 443 mydomain\training101 10.144.85.4
MSRPC 200 0 64 109
2013-09-23 06:58:46 10.144.144.71 RPC_IN_DATA /rpc/rpcproxy.dll [email protected]:6004&RequestId=a7c8daa9-e458-4f2d-b388-7300e8679dcd&cafeReqId=a7c8daa9-e458-4f2d-b388-7300e8679dcd; 443 - 10.144.85.4 MSRPC 401 1 2148074254
15
2013-09-23 06:58:46 10.144.144.71 RPC_OUT_DATA /rpc/rpcproxy.dll [email protected]:6004&RequestId=c40afede-dd8f-4ac7-a3dd-827872bb2e76&cafeReqId=c40afede-dd8f-4ac7-a3dd-827872bb2e76; 443 - 10.144.85.4 MSRPC 401 1 2148074254
15
2013-09-23 06:58:46 10.144.144.71 RPC_OUT_DATA /rpc/rpcproxy.dll [email protected]:6004&RequestId=2dc56148-1900-4044-b72a-4b13e5e871f0&cafeReqId=2dc56148-1900-4044-b72a-4b13e5e871f0; 443 mydomain\training101 10.144.85.4
MSRPC 404 0 64 15
2013-09-23 06:58:46 10.144.144.71 RPC_IN_DATA /rpc/rpcproxy.dll [email protected]:6004&RequestId=9475aad3-9537-4dac-86cb-6fdb187fa148&cafeReqId=9475aad3-9537-4dac-86cb-6fdb187fa148; 443 mydomain\training101 10.144.85.4
MSRPC 200 0 64 31
2013-09-23 06:58:46 10.144.144.71 RPC_IN_DATA /rpc/rpcproxy.dll [email protected]:6002&RequestId=11a54e96-d8d8-4649-8e01-f8138ebf7b8d&cafeReqId=11a54e96-d8d8-4649-8e01-f8138ebf7b8d; 443 - 10.144.85.4 MSRPC 401 1 2148074254
0
2013-09-23 06:58:46 10.144.144.71 RPC_OUT_DATA /rpc/rpcproxy.dll [email protected]:6002&RequestId=b1a3e503-1077-4144-84df-fcdb65a7eea4&cafeReqId=b1a3e503-1077-4144-84df-fcdb65a7eea4; 443 - 10.144.85.4 MSRPC 401 1 2148074254
15
2013-09-23 06:58:46 10.144.144.71 RPC_OUT_DATA /rpc/rpcproxy.dll [email protected]:6002&RequestId=5b5639ba-4c91-4351-bda6-bcec46d6b218&cafeReqId=5b5639ba-4c91-4351-bda6-bcec46d6b218; 443 mydomain\training101 10.144.85.4
MSRPC 404 0 0 15
2013-09-23 06:58:46 10.144.144.71 RPC_IN_DATA /rpc/rpcproxy.dll [email protected]:6002&RequestId=f200806f-3294-4210-8940-e3fee0385ccd&cafeReqId=f200806f-3294-4210-8940-e3fee0385ccd; 443 mydomain\training101 10.144.85.4
MSRPC 200 0 64 46
2013-09-23 06:58:46 10.144.144.71 RPC_IN_DATA /rpc/rpcproxy.dll [email protected]:6004&RequestId=675d6515-85da-43fa-9cd8-0a18ac06a71f&cafeReqId=675d6515-85da-43fa-9cd8-0a18ac06a71f; 443 - 10.144.85.4 MSRPC 401 1 2148074254
0
2013-09-23 06:58:46 10.144.144.71 RPC_OUT_DATA /rpc/rpcproxy.dll [email protected]:6004&RequestId=b97b2c3e-5309-4927-8330-fe0f339b5930&cafeReqId=b97b2c3e-5309-4927-8330-fe0f339b5930; 443 - 10.144.85.4 MSRPC 401 1 2148074254
0
2013-09-23 06:58:46 10.144.144.71 RPC_OUT_DATA /rpc/rpcproxy.dll [email protected]:6004&RequestId=504d462a-db21-4e4b-8568-79e4099d78c1&cafeReqId=504d462a-db21-4e4b-8568-79e4099d78c1; 443 mydomain\training101 10.144.85.4
MSRPC 404 0 0 31
2013-09-23 06:58:46 10.144.144.71 RPC_IN_DATA /rpc/rpcproxy.dll [email protected]:6004&RequestId=b4757b1e-8428-454a-91df-ca0a2153144f&cafeReqId=b4757b1e-8428-454a-91df-ca0a2153144f; 443 mydomain\training101 10.144.85.4
MSRPC 200 0 64 46 -
Connection Office365 Exchange - Outlook 2010/2013 (Desktop)
I have an Office365 account with Exchange function, connected with my personal domain. This works perfect for almost a year now, but since a few days, Outlook (desktop) can't connect to my ExchangeMail/Office365 anymore. Some details:
I can reach my mail via the Web App
My iPhone receives my email; no problems here
The password has not been changed
I've tried to connect with Outlook2010 on Windows7 and with Outlook2013 on Windows8; both can't connect
Profile removed and re-added: no result
As during creating/editing the profile in the ConfigurationScreen/Email, as in Outlook (2010 & 2013) itself, the login window pops up and can't connect (and because of that, Outlook automatically close).
In short: what is the problem here and -more important- how can I fix this?
Many Thanks,
Ewoud
PS: Apologies if this question has been asked in the wrong forum.Hi,
Please check the problematic users' Outlook settings by the following steps:
1. Click File > Account Settings > Account Settings > Change > More settings.
2. In Security tab, make sure "Encrypt data between Microsoft Outlook and Microsoft Exchange" option is checked, "Always prompt for logon credentials" is unchecked.
3. Change the logon network security to Negotiate Authentication, and Apply > OK to set it.
Restart Outlook to have a try. If the issue persists, please
re-create Outlook profile to check whether the issue persists.
Regards,
Winnie Liang
TechNet Community Support
Thank you for the response.
I did as you suggested and the problem persists -
Hi,
Our remote users had been connecting to our Exchange server at our office since the Exchange server was installed in 2011.
Starting last Wednesday, Outlook 2010/2013 clients, outside of our main office, can't connect to our Exchange 2010 server. Outlook kept asking for a username and a password. At the same time, entries of Event 4625 were generated on the Event
log on out Exchange server.
Events 4625 has the following properties, "Logon Type: 3", "Failure Reason: An Error occured during Logon.", "Status: 0xc000006d", "Logon Process: NtLmSsp", and "Authentication Package: NTLM".
By the way, I had used a laptop to test this problem. Its Outlook work fine ion the main office, but it won't work outside of our office.
Does anyone have any idea?
Thanks.
Johnnie :(
Johnniehttp://blogs.technet.com/b/rmilne/archive/2015/03/17/update-015_2d00_027-revised-_2800_3002657_2900_.aspx
For additional people reading this thread, please update to v2 of that update.
Cheers,
Rhoderick
Microsoft Senior Exchange PFE
Blog:
http://blogs.technet.com/rmilne
Twitter: LinkedIn:
Facebook:
XING:
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose. -
Hi,
I have I Phone 5, I brought this in last year september 2013, its not connected this network, i have done all setting changes, reset all the setting but its not able to connect this networkWarrenty should still cover it
-
Crystal reports 2013 , SAP MDX Driver not able to connect with BW BEX Query
Hi All,
We just installed Crystal 2013, and want to create crystal report on SAP BW CUBE/BEX Query through SAP MDX Driver.
1.When start connecting through SAP MDX Query option from new connection , SAP Systems which are in SAPLOGON are not appearing in initial screen. where as from OLAP Connection we are able to connect to SAP BEX Query.
2.Even from SAP Tool kit we are not able to connect to BEX query, we are getting ERROR MESSAGE.
and we are using SAP BI BO PLATFORM 4.1 sp01 .
Please suggest me , if I am missing any configuration settings.
Regards,
JosephHi Joseph,
Before you start building the report, make sure the right transports have been loaded on the SAP System. The right Transport files are the ones found inside the installation zip you download from SAP's server. They're under the "Collaterals\Add-Ons\SAP\Transports" folder.
For more info on Transports, authorizations etc, please have your BASIS admin go through this wiki:
Crystal Reports 2008 and BW - Installation and Configuration - Business Intelligence (BusinessObjects) - SCN Wiki
To resolve your first issue, please follow the steps from this thread:
Problems with SAPLogon.ini for SAP GUI and Crystal 2011
P.S: Crystal Reports for Enterprise 4.1 does a better job at handling BEx queries that the CR 2013 designer. It directly connects to BEx queries via the BICS connectivity driver and doesn't need the Transports to be there on the SAP System. You might want to give this flavour of CR a try too.
-Abhilash -
Microsoft Outlook 2010 & 2013 cannot set automatic reply settings
Hello,
We cannot seem to set automatic reply's within outlook 2010 & 2013. We have an exchange server 2010. We
can setup automatic reply through OWA absolutely fine. The error that we receive is 'Your automatic reply settings cannot be displayed because the server is currently unavailable. Try again later.
However we can setup out of office on any other office version below 2010 fine. We have run through
a number of tests and have come to the conclusion that the auto discover service is not configured correctly. I have been told to run through the following
"We need to make sure the IIS service is assigned to the certificate which includes mail.mydomainname.co.uk
name:
Enable-ExchangeCertificate -Thumbprint 62C247B3BD081D0A8B074D4A928A76E6DA3BABBA -Services
POP,IMAP,SMTP,IIS
Then restart IIS service
to apply the changes.
If the user is connect
to mailbox from external environment as your test results, it is recommended to add the autodiscover.mydomain.co.uk name in your certificate with IIS service. If so, the autodiscover
service can be accessed successfully in your posted second steps(https:/autodiscover.mydomain.co.uk/autodiscover/autodiscover.xml). Alternatively, if you don’t want to change your certificate configuration, we need to create a new SRV record for mail.mydomainname.co.uk
to make your autodiscover succeed in last steps of Srv Record lookup method".
So I followed this and opened Exchange Managemnet Shell and ran the following.....
'Enable-ExchangeCertificate -Thumbprint 62C247B3BD081D0A8B074D4A928A76E6DA3BABBA -Services POP,IMAP,SMTP,IIS'
The following output was displayed:
"VERBOSE: Connecting to SERVER2011.EXCHANGE.local
VERBOSE: Connected to SERVER2011.EXCHANGE.local.
[PS] C:\Windows\system32>Enable-ExchangeCertificate -Thumbprint 62C247B3BD081D0A8B074D4A928A76E6DA3BABBA -Services POP,I
MAP,SMTP,IIS
WARNING: This certificate will not be used for external TLS connections with an FQDN of 'SERVER2011.EXCHANGE.local'
because the CA-signed certificate with thumbprint '71ADF367E190E269C1036BBF4A09C55E62536791' takes precedence. The
following receive/send connectors match that FQDN: Default SERVER2011.
WARNING: This certificate will not be used for external TLS connections with an FQDN of
'mail.companyname.co.uk' because the CA-signed certificate with thumbprint
'67ECB1A383CBD05424C58F6A5E753C9377F49D3D' takes precedence. The following receive/send connectors match that FQDN:
Windows SBS Internet Receive SERVER2011, Fax/Printer.
Confirm
Overwrite the existing default SMTP certificate?
Current certificate: '67ECB1A383CBD05424C58F6A5E753C9377F49D3D' (expires 09/08/2015 09:06:17)
Replace it with certificate: '62C247B3BD081D0A8B074D4A928A76E6DA3BABBA' (expires 06/08/2015 17:05:22)
[Y] Yes [A] Yes to All [N] No [L] No to All [?] Help (default is "Y"):"
I opened up 'Internet Information
Services (IIS) Manager to find 2 Server Certificates issues to 'mail.companyname'
with the certificate hash' 62C247B3BD081D0A8B074D4A928A76E6DA3BABBA' and '71ADF367E190E269C1036BBF4A09C55E62536791'.
I opened up the Exchange Management
Console to confirm that the IMAP, POP, IIS, and SMTP services are bound to both of the certificates for 'mail.companyname'.co.uk
I need to know if it is okay to proceed in replacing the certificate and running this
command.
Thank youHi,
We have this problem with some of our users, in that they get the server unavailable error when trying to activate the out of office.
In our case this is because the Proxy is blocking the connection from the PC to the Exchange, so we just go to Internet Options - Connections - LAN Settings - Advanced (under proxy server) then just add *.domain.com into the Exceptions box at the bottom.
This seems to resolve the issue and allow them to set their out of office. The only reason this reoccurs for these users is because their roaming profile for some reason won't save the proxy settings, which is a different issue.
Hope this helps. -
Reporting Services not able to connect with sharepoint
HI
We have a Sql server instance where we are not able to install reporting services, so what we have done is we have created one more sql server instance on the same server with reporting services.
When we configured reporting services in sharepoint integrated mode and try to connect that web service url in sharepoint we are getting an error in sharepoint central administartion that not able to connect to the reporting services.
Request you to throw some light on the same.
Thanks
Geeth If you feel that the answer which i gave you is Helpful please select it as Answer/helpful.Hi Geeth,
Based on the limited information, I am not very clearly about you issue. In order to solve the problem more efficiently, I need to clarify some information. Could you post more detail information about “try to connect that web service url in sharepoint we
are getting an error in sharepoint central administartion”? For example, the detail steps about the action, the screenshot of the action, and what error message you received. I’m not sure which step are you trying to do. And could you tell me the edition of
your SQL Server and SharePoint? It is benefit for us to do further analysis.
References:
2008 R2:
http://technet.microsoft.com/en-us/library/bb283190(v=sql.105).aspx
http://sharepointtaskmaster.blogspot.in/2010/11/intergration-reporting-service-with.html
http://technet.microsoft.com/en-us/library/bb326213(v=sql.105).aspx
2012:
http://technet.microsoft.com/en-us/library/47efa72e-1735-4387-8485-f8994fb08c8c
http://denglishbi.wordpress.com/2011/07/22/configuring-sql-server-denali-reporting-services-sharepoint-2010-integration/
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support -
Problem with EM (Enterprise Manager is not able to connect to the database)
Hi all,
I've Oracle DB 11g Rel.1 installed on Windows XP SP3. The database is up and running i.e. everyone can connect to the DB by using any App tool e.g. SQL*Plus, Forms, or Reports. It means that the listener and the service is running. But the problem is that when I try to start the EM I see some error messages on the webpage.
It says:
Enterprise Manager is not able to connect to the database instance. The state of the components are listed below.Database Instance (Green arrow)
Status Open Details The instance is open.
Host shiman
Port *1521*
SID orcl
Oracle Home d:\Oracle\product\11.1.0\db_1
Agent Connection to Instance (Green arrow)
Status Succeeded
Details
Listener (Green arrow)
Status Up
Host shiman
Port *1521*
Name LISTENER
Oracle Home d:\Oracle\product\11.1.0\db_1
Location d:\Oracle\product\11.1.0\db_1\network\admin
Details
please see the attached file:
http://rapidshare.com/files/404840300/em.JPGI've already checked all the services, they are running. And when I execute emctl command I got the following message.
emctl status dbconsole
Oracle Enterprise Manager 11g Database Control Release 11.1.0.6.0
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
http://shiman:1158/em/console/aboutApplication
Oracle Enterprise Manager 11g is running.I have checked some documents around config files in sysman and test_orcl\sysman directories. Moreover, I have checked dbsnmp and sysman account for unlockness and password accuracy. But they did not help me to solve the problem.
My question is if every thing is working fine then what is the problem with the EM? Why it is not connecting to the DB?
Thanks.
Imanemdctl.trc2010-07-13 18:42:21 Thread-2196 WARN http: snmehl_connect: connect failed to (shiman:1158): No connection could be made because the target machine actively refused it.
(error = 10061)
2010-07-13 18:42:26 Thread-4856 WARN http: snmehl_connect: connect failed to (shiman:1158): No connection could be made because the target machine actively refused it.
(error = 10061)
2010-07-13 18:42:28 Thread-5684 ERROR ssl: nzos_Handshake failed, ret=28864
2010-07-13 18:42:28 Thread-5684 ERROR http: 1704: Unable to initialize ssl connection with server, aborting connection attempt
2010-07-13 18:42:28 Thread-5684 ERROR main: nmectla_agentctl: Error connecting to https://shiman:3938/emd/main. Returning status code 1
emoms.trc2010-07-13 18:45:44,562 [ApplicationServerThread-1] ERROR conn.ConnectionService verifyRepositoryEx.818 - Invalid Connection Pool. ERROR = Locale not recognized
2010-07-13 18:45:46,875 [ApplicationServerThread-2] ERROR conn.ConnectionService verifyRepositoryEx.818 - Invalid Connection Pool. ERROR = Locale not recognized
2010-07-13 18:45:46,921 [ApplicationServerThread-0] ERROR conn.ConnectionService verifyRepositoryEx.818 - Invalid Connection Pool. ERROR = Locale not recognized
2010-07-13 18:45:47,078 [ApplicationServerThread-2] ERROR conn.ConnectionService verifyRepositoryEx.818 - Invalid Connection Pool. ERROR = Locale not recognized
2010-07-13 18:45:47,125 [ApplicationServerThread-1] ERROR conn.ConnectionService verifyRepositoryEx.818 - Invalid Connection Pool. ERROR = Locale not recognized
2010-07-13 18:45:47,140 [ApplicationServerThread-3] ERROR conn.ConnectionService verifyRepositoryEx.818 - Invalid Connection Pool. ERROR = Locale not recognized
2010-07-13 18:45:47,187 [ApplicationServerThread-0] ERROR conn.ConnectionService verifyRepositoryEx.818 - Invalid Connection Pool. ERROR = Locale not recognized
2010-07-13 18:45:47,234 [ApplicationServerThread-5] ERROR conn.ConnectionService verifyRepositoryEx.818 - Invalid Connection Pool. ERROR = Locale not recognized
2010-07-13 18:45:47,281 [ApplicationServerThread-4] ERROR conn.ConnectionService verifyRepositoryEx.818 - Invalid Connection Pool. ERROR = Locale not recognized
2010-07-13 18:45:47,328 [ApplicationServerThread-6] ERROR conn.ConnectionService verifyRepositoryEx.818 - Invalid Connection Pool. ERROR = Locale not recognized
2010-07-13 18:45:48,984 [ApplicationServerThread-2] ERROR conn.ConnectionService verifyRepositoryEx.818 - Invalid Connection Pool. ERROR = Locale not recognized
2010-07-13 18:45:49,000 [EMUI_18_45_48_/console/aboutApplication] ERROR svlt.PageHandler handleRequest.639 - java.lang.IllegalStateException: Response has already been committed
java.lang.IllegalStateException: Response has already been committed
at com.evermind.server.http.EvermindHttpServletResponse.resetBuffer(EvermindHttpServletResponse.java:1853)
at com.evermind.server.http.ServletRequestDispatcher.unprivileged_forward(ServletRequestDispatcher.java:260)
at com.evermind.server.http.ServletRequestDispatcher.access$100(ServletRequestDispatcher.java:42)
at com.evermind.server.http.ServletRequestDispatcher$2.oc4jRun(ServletRequestDispatcher.java:204)
at oracle.oc4j.security.OC4JSecurity.doPrivileged(OC4JSecurity.java:283)
at com.evermind.server.http.ServletRequestDispatcher.forward(ServletRequestDispatcher.java:209)
at oracle.sysman.emSDK.svlt.PageHandler.render(PageHandler.java:1113)
at oracle.sysman.emSDK.svlt.PageHandler.myRender(PageHandler.java:1173)
at oracle.sysman.emSDK.svlt.PageHandler.handleRequest(PageHandler.java:597)
at oracle.sysman.emSDK.svlt.EMServlet.myDoGet(EMServlet.java:781)
at oracle.sysman.emSDK.svlt.EMServlet.doGet(EMServlet.java:337)
at oracle.sysman.eml.app.Console.doGet(Console.java:156)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:743)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64)
at oracle.sysman.eml.app.EMRepLoginFilter.doFilter(EMRepLoginFilter.java:87)
at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:15)
at oracle.sysman.db.adm.inst.HandleRepDownFilter.doFilter(HandleRepDownFilter.java:134)
at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:17)
at oracle.sysman.eml.app.BrowserVersionFilter.doFilter(BrowserVersionFilter.java:122)
at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:17)
at oracle.sysman.emSDK.svlt.EMRedirectFilter.doFilter(EMRedirectFilter.java:102)
at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:17)
at oracle.sysman.eml.app.ContextInitFilter.doFilter(ContextInitFilter.java:306)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:627)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:376)
at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:870)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:451)
at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:218)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:119)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:112)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:230)
at oracle.oc4j.network.ServerSocketAcceptHandler.access$800(ServerSocketAcceptHandler.java:33)
at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:831)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:595)
2010-07-13 18:45:49,000 [EMUI_18_45_48_/console/aboutApplication] ERROR em.console doGet.357 - java.lang.IllegalStateException: Response has already been committed, be sure not to write to the OutputStream or to trigger a commit due to any other action before calling this method.
java.lang.IllegalStateException: Response has already been committed, be sure not to write to the OutputStream or to trigger a commit due to any other action before calling this method.
at com.evermind.server.http.EvermindHttpServletResponse.sendRedirect(EvermindHttpServletResponse.java:1339)
at oracle.sysman.emSDK.svlt.EMServlet.myDoGet(EMServlet.java:806)
at oracle.sysman.emSDK.svlt.EMServlet.doGet(EMServlet.java:337)
at oracle.sysman.eml.app.Console.doGet(Console.java:156)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:743)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64)
at oracle.sysman.eml.app.EMRepLoginFilter.doFilter(EMRepLoginFilter.java:87)
at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:15)
at oracle.sysman.db.adm.inst.HandleRepDownFilter.doFilter(HandleRepDownFilter.java:134)
at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:17)
at oracle.sysman.eml.app.BrowserVersionFilter.doFilter(BrowserVersionFilter.java:122)
at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:17)
at oracle.sysman.emSDK.svlt.EMRedirectFilter.doFilter(EMRedirectFilter.java:102)
at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:17)
at oracle.sysman.eml.app.ContextInitFilter.doFilter(ContextInitFilter.java:306)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:627)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:376)
at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:870)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:451)
at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:218)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:119)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:112)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:230)
at oracle.oc4j.network.ServerSocketAcceptHandler.access$800(ServerSocketAcceptHandler.java:33)
at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:831)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:595) -
Enterprise manager is not able to connect to database instance
Hi
I am having a problem with Oracle EM. I would appreciate very much if anyone can help me.
I installed Oracle on XP which runs on virtual pc on XP as well. Everything is fine, I can connect to database with sqlplus, and there were no errors during installation.
But the problem is that, when I try to connect to database with EM, it says:
Enterprise manager is not able to connect to database instance . The state of the components are listed below.
Can anoyone help me?user10637311 wrote:
When you want OEM DB , your existing DB should be created by DBCA or if suppose manually creaed DB then you have to configure that DB to EM by
"emca -config dbcontrol db -repos create". for these two cases istener should be running.
emctl start dbconsole -> to start dbconsole service
emctl status dbconsole-> status of servicesI am sorry, I was looking at $ORACLE_HOME\admin . And in the proper path, both listener.ora and tnsnames.ora do exist.
emca -config dbcontrol db -repos create :
<last part>:
INFO: This operation is being logged at C:\oracle\product\10.2.0\db_1\cfgtoollog
s\emca\orcl\emca_2010-02-18_02-01-40-AM.log.
Feb 18, 2010 2:02:46 AM oracle.sysman.emcp.util.DBControlUtil stopOMS
INFO: Stopping Database Control (this may take a while) ...
Feb 18, 2010 2:03:19 AM oracle.sysman.emcp.EMReposConfig createRepository
INFO: Creating the EM repository (this may take a while) ...
Feb 18, 2010 2:03:19 AM oracle.sysman.emcp.EMReposConfig invoke
SEVERE: Error creating the repository
Feb 18, 2010 2:03:19 AM oracle.sysman.emcp.EMReposConfig invoke
INFO: Refer to the log file at C:\oracle\product\10.2.0\db_1\cfgtoollogs\emca\or
cl\emca_repos_create_<date>.log for more details.
Feb 18, 2010 2:03:19 AM oracle.sysman.emcp.EMConfig perform
SEVERE: Error creating the repository
Refer to the log file at C:\oracle\product\10.2.0\db_1\cfgtoollogs\emca\orcl\emc
a_2010-02-18_02-01-40-AM.log for more details.
Could not complete the configuration. Refer to the log file at C:\oracle\product
\10.2.0\db_1\cfgtoollogs\emca\orcl\emca_2010-02-18_02-01-40-AM.log for more deta
ils.
C:\oracle\product\10.2.0\db_1\cfgtoollogs\emca\or
cl\emca_repos_create_<date>.log:
Check if repos user already exists.
old 6: WHERE username=UPPER('&EM_REPOS_USER');
new 6: WHERE username=UPPER('SYSMAN');
old 8: IF ( '&EM_CHECK_TYPE' = 'EXISTS') THEN
new 8: IF ( 'NOT_EXISTS' = 'EXISTS') THEN
old 11: raise_application_error(-20000, '&EM_REPOS_USER does not exists..');
new 11: raise_application_error(-20000, 'SYSMAN does not exists..');
old 14: ELSIF ( '&EM_CHECK_TYPE' = 'NOT_EXISTS' ) THEN
new 14: ELSIF ( 'NOT_EXISTS' = 'NOT_EXISTS' ) THEN
old 17: raise_application_error(-20001, '&EM_REPOS_USER already exists..');
new 17: raise_application_error(-20001, 'SYSMAN already exists..');
old 21: raise_application_error(-20002, 'Invalid Check type &EM_CHECK_TYPE');
new 21: raise_application_error(-20002, 'Invalid Check type NOT_EXISTS');
DECLARE
ERROR at line 1:
ORA-20001: SYSMAN already exists..
ORA-06512: at line 17
Maybe you are looking for
-
How to reference a specific page of indesign file with xml
Hi, I have a project that will produce many indesign files and what I want to do is use xml to build them. The main issue is that one of the source files will be in indesign. So what I need to find out is how do you specify attributes for page 2 of a
-
500 GB internal hard drive?
Does anyone know if there is a 500 GB internal hard drive available for MacBook 13-inch Aluminum (Late 2008)?? I saw this one online and have had a good thing with Western Digital drives before. http://www.wdc.com/en/products/products.asp?DriveID=506
-
808 Belle FP2 gallery missing features
Nokia 808 Belle FP2's gallery is still crippled. There is no way to organize photos into folders or tag them in any useful manner. And there no possibility to select multiple items for sharing etc. Gallery cannot zoom images that are downloaded to th
-
New to mac and i cant set up mail account with yahoo plus...help please!
hello,its my first post and im having all sorts of problems settting up my mail account even though ive upgraded to yahoo plus as recommended....i just dont understand the port numbers and pop,can anyone help please?
-
We have our own custom JSP tag libraries (some of them extend the Struts tags, but many do not) and want those to render correctly in the design view. Is that supported by NitroX Struts, or will it only work with built-in Struts tags? If it is suppor