Outlook 2010 - Always reply using HTML Format Option???

Hey Guys,
Have had a good look through the outlook 2010 options but can't find anywhere the option you had in previous outlook versions to set always reply using HTML format email as your default reply type.
You can open the email and go to the "Format Text" tab and Select "HTML" but I was looking for a permenant way of setting HTML.
Thanks for any help you can give,
Thomas

A couple of things spring to mind.
If you click the Reply button then delete the TO address and type a different one that's not really a reply. You are effectively Forwarding the message (to another person) and changing its format to suit that other person. Perhaps you
could investigate adding a custom button that does these two actions with one click.
Your bug system started the email in Plain Text, probably because it isn't configured for or can't handle HTML mail. Perhaps you could investigate if it can be configured to use HTML format or changed for a system that can.
You don't have to copy and paste your HTML signature. After you change to HTML format, just click Insert | Signature again and any Plain Text signature should be replaced by an HTML one. (Outlook 2007 and 2010 certainly do this as they know where the signature
is. I seem to remember that 2003 and before add an HTML signature to the message so you have to delete any existing Plain Text one and/or move the HTML signature to the right place in the message.) This is assuming you have Outlook add a signature to all messages
as they are created. If you don't then there is no signature to change on the message. You just add the signature after changing format.
I fully accept that there are valid reasons for wanting to force Outlook to use HTML format
in certain circumstances but it will not be the right thing to do 100% of the time and if you do so you risk the message you send being unreadable at the other end. For this reason Outlook makes the change of format a manual task. It could, in future,
make it easier or help you decide when it is appropriate. We will have to wait and see what transpires in Office '15' which should be going to public beta in the next couple of months.
Simon Jones
If you found this post helpful, please "Vote as Helpful". If it actually answered your question, please remember to
"Mark as Answer". This will help other people find answers to their problems more quickly.

Similar Messages

Create a Multiple-Line JButton Without Using HTML format

I used html format for multiple-line JButton and it took a long time to load that button up (about 5 seconds more). Does anyone know how to create a multiple-line JButton without using html?
Any suggestion or sample code will be appreciated.
javamesser

Hello,
You could try using the following:
-give your button some layout (e.g.: BoxLayout.Y_AXIS, or BorderLayout).
-create the wrapped text in separate JLabels (one line in each label)
-add your labels to the button
Advantage:
this solution does not affect the laf classes
Disadvantage:
focus rectangle is not calculated accurately
Regards,
G

Outlook 2010 does not appear as an option in IntelliSync

I am trying to sync my calendar with Outlook 2010 (32 bit). When I go into DM 6.0 calendar setup, only ASCII and Yahoo! appear as available decktop options. How do I get DM to see my installed Outlook so that I can sync? Thanks!
Tech info:
DM v6.0.0.43
Storm 9530
Windows 7 (64-bit)
Outlook 2010 (32-bit)
My ultimate goal is to sync to Google calendar so I can view online, by syncing to Outlook, I can then export and upload to Google. Please let me know if there is an alternate way.
Thanks!

You might give this a try:
http://www.blackberry.com/btsc/KB02362
1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

Outlook 2010 on XP using MAPI cannot receive from some colleagues in the office but can receive from out of office

Have a strange problem with one of the users in my company using Outlook 2010 using MAPI on XP pro platform.
We have about 50 users in the office and some can send to this user but others cannot with a Microsoft error message stating that the email in undeliverable.
Run the Outlook Analyser and everything is in order.
Run the email setup send and receive and the test is successful.
Any idea what is causing this problem. We are on a Windows Server 2010 domain.
Kindly let me know what else to check. Thank you.

Actually, this user is not on Outlook Exchange but the previous IT person went to create an Exchange User name for her in the Exchange Server.
I have deleted her user on the Exchange Server.
She is on another email system using MAPI which uses the PostFix system.
However, most of the other users, myself included is on the Outlook Exchange and I also cannot send to her. I will have a Microsoft undeliverable error message.
When I run the Microsoft Outlook Analyser test everything passed.
Quite a tricky problem. Example of her email alias is [email protected] whereas her actual email is [email protected]
I have checked the PostFix email relay system and it points [email protected] to [email protected]
Really appreciate your help and time to look into this problem.
GOD Bless...

I cannot download pictures in outlook 2010 and am using firefox

Suddenly, I cannot DOWNLOAD PICTURES in my MS Outlook 2010. If I right click on the red cross and select DOWNLOAD PICTURES, it changes to a red square, green circle and blue inverted triangle. Please help. I use a 64-bit operating system : Windows 7 Ultimate. My Internet Explorer no longer works so I have set Mozilla Firefox as my default browser
edit: removed your mail address from public display, since the only thing it will attract are spam bots. you will be notified per mail once somebody replies to the thread. (philipp)

You can check for problems with DDE.
*http://kb.mozillazine.org/Windows_error_opening_Internet_shortcut_or_local_HTML_file_-_Firefox
Try to redo the default browser setting and temporarily set another browser like IE as the default browser.
*http://kb.mozillazine.org/Default_browser
*https://support.mozilla.org/kb/How+to+make+Firefox+the+default+browser
*https://support.mozilla.org/kb/Setting+Firefox+as+the+default+browser+does+not+work

Trouble syncing email changes in outlook 2010 to iPad using iCloud. It works the other way round!!!

I have set up my mobileme email in outlook 2010 and installed and set up the iCloud Windows tool. However, I am having problems syncing changes I make on the PC. For example, if I delete an email on my iPad, it almost immediately deletes it from my Outlook...perfect. But if I delete an email from Outlook it doesn't delete from my iPad. Am I doing something wrong? Can anyone help?

I misspoke when i said,
"If a new appointment is created in Outlook 2007 it is synch to the iOS devices. The appointments can then be modified on these devices and that change is reflected properly in "Calendar in iCloud"."
It is true the new appt is visible on the iOS devices and changes (such as adding appt details can be made from these devices) .. however those changes are only reflected on the other iOS device and not brought back into "Calendar in iCloud" w/in Outook.

TS3899 I am trying to open a work report using html format on my ipad and it says it is blocked. How do I unblock it?

Hello.
I am trying to open a report from work that is in html format and I keep getting an error message saying that html is blocked?? I am thinking I need to adjust some sort of setting, but I am stuck. Any help is appreciated.
Thank you!

Maybe it is not html document. It may have html elements in there.
You say reports, maybe it's in excel or some other formats.
If it's excel, you have to have some apps that can read the format.
Apple Pages app can open excel document for example.

How to send mail using HTML format using tags

Hello experts,
I am currently using FM SO_NEW_DOCUMENT_SEND_API1 to send e-mails to our users' Outlook accounts. Now, I converted its document type from 'RAW' to 'HTM'. I enclosed my texts in HTML tags. But the problem is, I cannot see a thing when I check my message in SCOT. It just opens internet explorer and thats it. Anyway, Below is my code:
get e-mail addresses of controllers in table ZSHIPTO_EMAIL
SELECT * FROM zshipto_email
INTO TABLE it_zshipto_email
WHERE zevent = '2'.
IF sy-dbcnt > 0.
 IF NOT it_del_entries[] IS INITIAL.
 CLEAR lv_contents.
 maildata-obj_name = 'Record Deleted in table ZTS0001'.
 maildata-obj_descr = 'Record Deleted in table ZTS0001'.
 maildata-obj_langu = sy-langu.
 records deleted in ZTS0001 and ZTS_STPGEOLOC
 CLEAR: lv_flag, lv_counter.
 LOOP AT it_zshipto_email.
 CLEAR: it_del_entries, mailtxt.
 LOOP AT it_del_entries ASSIGNING <fs_del_entries>.
 get name of dealer
 SELECT SINGLE name1 FROM kna1
 INTO <fs_del_entries>-name1
 WHERE kunnr = <fs_del_entries>-kunnr.
 IF lv_counter IS INITIAL.
 CONCATENATE: ''
 'FYI: The ff record/s were deleted in tables'
 'ZTS0001 and ZTS_STPGEOLOC by user' sy-uname
 ''
 INTO lv_contents
 SEPARATED BY space.
 mailtxt-line = lv_contents.
 APPEND mailtxt.
 CLEAR: mailtxt, lv_contents.
 ENDIF.
 APPEND mailtxt.
 CONCATENATE: ''
 'Dealer :' <fs_del_entries>-kunnr '-'
 <fs_del_entries>-name1 ''
 INTO lv_contents
 SEPARATED BY space.
 mailtxt-line = lv_contents.
 APPEND mailtxt.
 CLEAR: mailtxt, lv_contents.
 CONCATENATE: ''
 'Ship-To:' <fs_del_entries>-cdseq ''
 INTO lv_contents
 SEPARATED BY space.
 mailtxt-line = lv_contents.
 APPEND mailtxt.
 CLEAR: mailtxt, lv_contents.
 CONCATENATE: ''
 'Address:' <fs_del_entries>-zaddress ''
 INTO lv_contents
 SEPARATED BY space.
 mailtxt-line = lv_contents.
 APPEND mailtxt.
 CLEAR: mailtxt, lv_contents.
 CONCATENATE: ''
 'Contact person:' <fs_del_entries>-zcperson
 ''
 INTO lv_contents
 SEPARATED BY space.
 mailtxt-line = lv_contents.
 APPEND mailtxt.
 CLEAR: mailtxt, lv_contents.
 CONCATENATE: ''
 'Contact number:' <fs_del_entries>-zcnumber
 ''
 INTO lv_contents
 SEPARATED BY space.
 mailtxt-line = lv_contents.
 APPEND mailtxt.
 CLEAR: mailtxt, lv_contents.
 lv_counter = 1.
 ENDLOOP.
 APPEND mailtxt.
 mailrec-receiver = it_zshipto_email-zemail.
 mailrec-rec_type = 'U'.
 APPEND mailrec.
 CALL FUNCTION 'SO_NEW_DOCUMENT_SEND_API1'
 EXPORTING
 document_data = maildata
 document_type = 'HTM'
 put_in_outbox = 'X'
 commit_work = 'X'
 TABLES
 object_header = mailtxt
 object_content = mailtxt
 receivers = mailrec
 EXCEPTIONS
 too_many_receivers = 1
 document_not_sent = 2
 document_type_not_exist = 3
 operation_no_authorization = 4
 parameter_error = 5
 x_error = 6
 enqueue_error = 7
 OTHERS = 8.
 IF sy-subrc <> 0.
 MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
 ENDIF.
 CLEAR: mailtxt, mailrec, lv_counter.
 REFRESH: mailtxt, mailrec.
 ENDLOOP.
 ENDIF.
Message was edited by: viraylab

Hi,
Check this...
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5931ff64-0a01-0010-2bb7-ff2f9a6165a0
Regards
vijay

Safari opens websites not using HTML formatting- Why?

Can anyone help? This is what happens on many websites - such that I no longer use Safari : http://screencast.com/t/cmh3eNvkva
Safari gives me two problems:
1. Not formatting sites correctly making them unusable
2. Telling me that Site Certificates are untrusted (when they should be trusted - and are the correct sites)
I have tried everything I can think of - Clearing cashe - uninstalling and re-instaling Safari - upgrading Safari. Everything workd fine in Firefox - thank heaven.
But honestly, what's the point of a Browser - and a Mac one at that, which won't function properly?

Please read this whole message before doing anything. This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it. Step 1 The purpose of this step is to determine whether the problem is localized to your user account. Enable guest logins* and log in as Guest. For instructions, launch the System Preferences application, select Help from the menu bar, and enter “Set up guest users” (without the quotes) in the search box. Don't use the Safari-only “Guest User” login created by “Find My Mac.” While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin. Test while logged in as Guest. Same problem? After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it. *Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing. Step 2 The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login. Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
When you see the gray Apple logo, release the shift key.
If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
*Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode.
Test while in safe mode. Same problem?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.

Templated created in Outlook 2010 to be used as routing slip ~ Best way to create fields that will pull in contacts from outlook

Hello All,
I'm currently running into difficulty with my Outlook Form. I have been tasked with creating a routing form within Outlook that will replace a pdf form. The form/email will be routed from 1 person on done the line as each person has inforamtion to eitehr
enter or to makr that they have viewed the form/email. I'm trying to create a field that would allow each individual to place their name in the apporatie box from either the Outlook contact list or create a dropdown list with the individuals in
my department. When I tried to create a contact field it would duplicate whomever first sent the email. Any and all help is very welcomed.
Purplexed,
David

Not possible in my opinion. You may try a code solution.
Flynn

Always reply using the same email address?

Let's say my Mail app is set up with three email accounts - one on Gmail, one on AOL, and one on my private domain name. All mail is received on a regular basis and it's fine, but what if I want EVERY response - no matter what account it was received in - to come from the same email address? I know I can set the "From" address in the pop-up list when composing the reply (or creating a new message), but what if I don't want the "From" pop-up list and I want EVERY reply to come from ONE address? Is this possible?

ÜberMacHead wrote:
Let's say my Mail app is set up with three email accounts - one on Gmail, one on AOL, and one on my private domain name. All mail is received on a regular basis and it's fine, but what if I want EVERY response - no matter what account it was received in - to come from the same email address? I know I can set the "From" address in the pop-up list when composing the reply (or creating a new message), but what if I don't want the "From" pop-up list and I want EVERY reply to come from ONE address? Is this possible?
no. if you want something like this you may want to rearrange how your mail is received. you can set the other two accounts to automatically forward mail to the account you want to send from and only set up that one account in Mail.

I use a Win7 PC with iCloud and Outlook 2010 for syncing my calendar and contacts. I can enter data in my Outlook Calendar and it will appear in iCloud, but data entered in iCloud does not sync back to Outlook. ICloud syncs to my iphone fine both ways.

I use Win 7 PC with iCloud and Outlook 2010 for syncing my Contacts and Calendar. They have stopped syncing...mostly.
Now, appointments I enter on my local Outlook (iCloud) Calendar goes up to iCloud fine. But, data I enter on iCloud directly does not come down to my local Outlook iCloud Calendar. If I reboot the computer, the iCloud data shows up.
Also, Contacts I try to enter on my Outlook (iCloud) Contacts goes up to iCloud fine, but does not show up in my local iCloud Contacts.
All syncing works with my iPhone.
I have signed out of iCloud on PC. I have stopped syncing and re-started. No change.
I have an .aplzod folder for iCloud. I have a separate Earthlink.net.pst email account in Outlook and a me.com.pst Outlook email account (which I don't actually use) listed under Data Files.
Any help would be appreciated. Curious that Outlook will upload to iCloud but not receive downloads unless I reboot. However, rebooting does not download the missing Contacts.
Jim Robbins

Hi Jim!
You've started off with some good troubleshooting steps, so let's see if we can take this a little further and figure out what the issue is with your iCloud contacts and calendars. I have two articles here that will help you troubleshoot this issue a little further, but the troubleshooting steps for both articles are exactly the same, so I will lay those out for you here:
Note: When using iCloud Control Panel 2.0 and later, iCloud Calendar event descriptions in Outlook 2010 do not support text formatting (bold, italics, or underline), HTML, images, or attachments. The contextual (right-click) menu has also been disabled.
If you are having trouble with a PC (with Outlook 2007 or 2010) and iCloud Calendar, try each of these steps, testing after each to see if the issue is resolved:
Verify that you are using a Windows configuration that is supported by iCloud. For more information, see iCloud system requirements.
When enabling Calendars in the iCloud Control Panel, part of the setup process is to copy your Calendars data from the default Outlook ".pst" file to iCloud, and then remove the Calendars from the ".pst" file by placing them in the Deleted Items folder in Outlook. The Calendars data is then stored in the iCloud data set within Outlook so that changes can be pushed to and from Outlook by iCloud. Be sure you are looking for your data within the iCloud dataset within Outlook after enabling Calendars in the iCloud Control Panel. The deleted files can be seen by viewing Deleted Items within your Outlook Folder List. This is not iCloud removing your data; iCloud simply copies your data into the iCloud data set and then removes the local Calendars data by placing it in the Deleted Items folder.
Make sure your computer is online. Attempt to view www.apple.com and iCloud.com. If you can't connect to the Internet, your iCloud calendars and events will not update in Outlook. Click here for more information about troubleshooting your Internet connection.
Open a secure website to test if you are online as is necessary for iCloud Calendar. This also tests if the ports 80 and 443 are accessible. Outlook requires port 443 access to iCloud in order to push and pull updates to and from the iCloud Calendar servers.
Verify that your iCloud member name is entered into the iCloud Control Panel pane. See iCloud Setup for more information about setting up iCloud on Windows.
Completely close and reopen the iCloud Control Panel.
If you recently made changes in Outlook and they are not moving to your other devices or vice-versa, click the Refresh button in Outlook.
Turn iCloud Calendar off and back on:
Close Outlook.
Open the Windows Control Panel:
In Windows 8, move the pointer to the upper-right corner of the screen to show the Charms bar, click the Search charm, and then click the iCloud Control Panel on the left.
In Windows 7 and Vista, choose Start menu > All Programs > iCloud > iCloud.
Remove the checkmark in the checkbox next to Mail, Contacts, Calendars & Tasks, and click Apply. Wait a few seconds, then replace the checkmark, and click Apply.
Open Outlook and test to see if the issue has been resolved.
Ensure the iCloud Outlook Add-in is active within Outlook.
Outlook 2010:
Open Outlook 2010.
Click the File menu.
Click Options in the left panel of the Outlook window.
Click Add-Ins in the left panel of the Outlook Options window.
Look at the list of add-ins beneath "Active Application Add-Ins" and verify that the "iCloud Outlook Add-in" is listed.
For Outlook 2007, follow these steps to verify the iCloud Outlook Add-in is active
Open Outlook 2007.
From the Tools menu, choose Trust Center.
Select Add-ins from the left column.
Look at the list of add-ins beneath "Active Application Add-Ins" and verify that the "iCloud Outlook Add-in" is listed.
For additional information about managing Add-ins with Microsoft Outlook, see this Microsoft support document.
Restart your computer. This may sound simple, but it does reinitialize your network and application settings and can frequently resolve issues.
iCloud: Troubleshooting iCloud Contacts
http://support.apple.com/kb/ts3998
iCloud: Troubleshooting iCloud Calendar
http://support.apple.com/kb/ts3999
Thanks for using the Apple Support Communities!
Cheers,
Braden

Can't sync Outlook 2010 calendar using DM 6

Hi, This is my first time on the forum. I have searched for similar issues and tried some suggestions, but am still having issues. I get "BlackBerry Desktop Software has encountered a problem and needs to close" error message trying to sync to Outlook 2010 address book using DM 6. When I press debug to get more info, I get the error "Rim.Desktop.exe has encountered a problem and needs to close" and then it shuts down. I have narrowed it to just my address book. My notes, calendar, and tasks sync fine. I thought it may be some rich text (hyperlinks, etc.) in the notes of contacts and disabled the link of the body to notes in the advanced options, but it still crashes. Looking for some help on next steps. asrjcb

Hi asrjcb,
I would recommend downloading and installig the latest version of BlackBerry Desktop Manager. This now has support for Microsoft Outlook 2010 64-bit.
http://www.blackberry.com/go/softwaredownloads
Thanks
-CptS
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

All my appointments in Outlook 2010 have disappeared.

They're on my iPhone 5 and iPad 4 but won't even sync to Outlook - I have everything on iCloud. Started out of the blue about 5 weeks ago, mid-March 2014. With the contiuous little problems and now this MUCH BIGGER problem (for which there is no apparent fix) I'm seriously thinking of moving to a different tablet, different phone. I miss Steve Jobs.

None of the steps of troubleshooting said anything about updating ios. You can see them under heading about "on the windows pc".
Here are step by step.
If you're having trouble with iCloud Calendar on a PC (with Outlook 2007 or later), try each of these steps, testing after each to see if the issue is resolved.
Note: iCloud Control Panel does not support Outlook 2010 Personal Edition. When using iCloud Control Panel 2.0 and later, iCloud Calendar event descriptions in Outlook 2010 do not support text formatting (bold, italics, or underline), HTML, images, or attachments. The contextual menu (right-click) has also been disabled.
Verify that you are using a Windows configuration supported by iCloud.
Make sure that your computer is online. Attempt to view www.apple.com. If you can't connect to the Internet, your iCloud calendars and events will not update in Outlook. Learn about troubleshooting your Internet connection.
Open a secure website to test if ports 80 and 443 are accessible. Outlook requires port 443 access to iCloud to push and fetch updates to and from the iCloud Calendar servers.
Verify that your iCloud member name is entered into the iCloud Control Panel window. Learn about setting up iCloud on Windows.
Close and reopen the iCloud Control Panel.
Make sure that iCloud is not your default account in Outlook:
In Outlook 2013 and 2010, select File > Info > Account Settings > Data Files. If iCloud is listed as the default account in the Comments column, select a different account and click Set as Default.
In Outlook 2007, select File > Data File Management > Data Files. If iCloud is listed as the default account in the Comments column, select a different account and click Set as Default.
If you recently made changes in Outlook and they are not updating on your other devices or vice versa, click the Refresh button in Outlook.
Turn iCloud Calendar off and back on:
Close Outlook.
Open the iCloud Control Panel:
In Windows 8.1, go to the Start screen, click the down arrow in the lower-left corner, then click the iCloud app.
In Windows 8, go to the Start screen, then click the iCloud tile.
In Windows 7, choose Start menu > All Programs > iCloud > iCloud.
Deselect the checkbox next to Mail, Contacts, Calendars & Tasks, and click Apply. Wait a few seconds, then replace the checkmark and click Apply.
Open Outlook and test to see if the issue has been resolved.
Make sure that the iCloud Outlook Add-in is active within Outlook. (Learn more about managing Add-ins with Microsoft Outlook.)
Outlook 2013 and 2010:
Open Outlook 2013 or 2010.
Click the File menu.
Click Options in the left panel of the Outlook window.
Click Add-Ins in the left panel of the Outlook Options window.
Look at the list of add-ins beneath "Active Application Add-Ins" and verify that "iCloud Outlook Add-in" is listed.
Outlook 2007:
Open Outlook 2007.
From the Tools menu, choose Trust Center.
Select Add-ins from the left column.
Look at the list of add-ins beneath "Active Application Add-Ins" and verify that "iCloud Outlook Add-in" is listed.
Restart your computer. This may sound simple, but it reinitializes your network and application settings and can frequently resolve issues.
Note: When enabling Mail, Contacts, Calendars & Tasks in the iCloud Control Panel, part of the setup process is to copy your Calendars data from the default Outlook .pst file to iCloud, then remove the Calendars from the .pst file by placing them in the Deleted Items folder in Outlook. The Calendars data is then stored in the iCloud data set within Outlook so that changes can be pushed to and from Outlook by iCloud. Make sure that you're looking for your data within the iCloud folder in Outlook after enabling Calendars in the iCloud Control Panel. The deleted files can be seen by viewing Deleted Items within your Outlook Folder List. This is not iCloud removing your data. iCloud simply copies your data into the iCloud data set and then removes the local Calendars data by placing it in the Deleted Items folder.

Synching on Windows 7 (64 bit) between Palm desktop (6.2.2) and Outlook 2010

I have recently purchased a new laptop with Windows 7 (64 bit) and Outlook 2010 which I use for email, contacts and calander. I have managed by a miracle using bluetooth to synch between my Tungsten E2 and Palm desktop and know that there are no tools, as yet, to synch between my E2 and Outlook 2010. Would it work as a two stage process i.e.
1. synch desktop and outlook
2. synch desktop and E2.
If so how do I do step one?
Thanks
Pepper
Post relates to: Tungsten E2

In PD 6.2.2 there is a PIM conduit switcher. Have you tried this?
Another option I can think to try is to export your data in a format compatible with Outlook, .csv or .tab and then import into Outlook.
Chapura makes a program called pocket copy. It is a one time transfer of your data from PD to Outlook.
They have a program called Pocket Mirror but is only compatible with 32 bit versions.
Here is a link to their site.
http://www.chapura.com/products.php

Outlook 2010 - Always reply using HTML Format Option???

Similar Messages

Maybe you are looking for