Outlook 2010 Basic Authentication Fails after Server Update

It appears that since updating our 2 DCs (Win 03 Enterprise SP2) with windows update released this week (March 10 - fully patched before), Outlook
users using Basic Authentication all failed to connect to our Ex 03 SP2 server.
Domain users connecting using NTLM has no problem. Our Ex server has also been updated ..
Can anyone suggest how to trouble shoot? Thanks a lot.

Hi,
How did those server use Basic Authentication Set-up? Was there any difference between Domain Users and users who use basic authentication?
Meanwhile we can start checking below items:
Ping your Exchange server address/DNS from the client machine which using basic authentication, see if the Exchange server was pingable.
NSlookup Exchange server address/DNS from the client machine which using basic authentication, see if the address/DNS of the Exchange server could be resolved from client.
Collecting Outlook log from client machine which using basic authentication, default location is: C:\Users\<user>\AppData\Local\Temp\outlook logging\<user email account>-<user>.ost.log
at current date time.
Send the log though mail to: [email protected]
Let me know the result about 1 and 2 here or along with mail. Thanks.

Similar Messages

AFP authentication fails after software updates

Hi,
I'm running a 10.4.7 server configured as an Open Directory Master. It is the only server and is mainly used for AFP and SMB file sharing. (No client shell logins).
For some time now (since 10.4.3) I'm finding that after I apply a Software Update* our AFP users can no longer log in to AppleShare. They can mount the same volumes via SMB, but cannot authenticate via AFP until I have them manually reset their password (even to the old value) in Workgroup Manager.
The ApplePasswordServer.Server.log file shows:
DIGEST-MD5 authentication failed, SASL error -13 (password incorrect)
(It's definitely not a case of mis-typed passwords, as these errors are generated by saved keychain logins...and the same keychain logins work again after the old password has been re-entered again in Workgroup Manager).
Has anybody seen any problems like this before and have any ideas how to fix it?
* I haven't been able to narrow down specifically which types of Software Updates yet.
Mac OS X (10.4.7)
Mac OS X (10.4.3)

It is one user per sharepoint for personal directories on the server. Many of the users do have access to various other sharepoints however for common projects, etc.
(None of the share points are in the sub-directories of any other sharepoints either. ie. No sharepoint has an ancestor directory that is also a sharepoint.)
When the problem occurs, all AFP users lose access to all AFP sharepoints however.
The permissions on the sharepoints themselves are ok as:
- users can access the same sharepoint with SMB
- when the user re-enters their password, AFP access is restored, without needing to change the permissions whatsoever.
I hope that is a bit clearer! Appreciate your time in responding.

SOLVED Key board and mouse fail after last update

Both my wireless keyboard and mouse failed after I updated yesterday. I'm using KNOPPIX to post they both work with knoppix so its not a hardware problem.
KDE 4.1
Logitech keyboard and mouse
Last edited by normc (2008-11-08 00:05:37)

Thanks a lot
Just want to add that I had to edit grub at start up and add "single" at the end of the kernel line.
The reason is that switching to runlevel 3 didn't work for me.

Clients outlook 2010 32 bits not connect server after apply CU6

Hi
The last weekend I installed the CU6 in my Exchange 2013, I was problems with the web services ECP and OWA. I applied the solution of this link.
http://ril3y.wordpress.com/2014/03/25/exchange-2013-owa-and-ecp-logins-fail-with-500-error/
This week I have some clients that can´t connect the Outlook 2010, they can use the owa but they have some PST that can't see in owa.
I checked and they have all the updates of office 2010.
I check and they can solve the autodiscover url but if I try the test automatic configuration and this are the results
I check the connection with the local agent of Microsoft connectivity analyzer and all it's right.<o:p></o:p>
I tried to do a manual configuration of the account connections options and some users were solved but others still without connection.<o:p></o:p>
I see that the Address Book can’t be update in the clients this fail.<o:p></o:p>
Some body else have the same problem?
or have you any idea?

Hi,
This is an English forum for Exchange server. In order to solve your issue effectively, please describe the error information in English for my research. Your understanding will be appreciated.
Best regards,
Amy Wang
TechNet Community Support

Toshiba EXCITE Pro - WIFI connection. Authentication failed after update

Hello.
Just received this Tablet.
Everything seemed ok while updating to the latest version (did that first to solve the heat problems).
After the last update *i lost my WIfi connection. Authentication failed* (didnt change something - was connecting - updating ok 1 minute before the last update).
After that i started testing ,Wps connection , No security Wifi etc etc.
*Finally at a random time (and with the initial settings) i got connected*. After i shut down the tablet the same problem occured.
After doing the same things again i finally got connected and this time it seems to be ok, even after i shut down the tablet.
However this is frustrating.
Maybe you have to sort this out?
I have seen and other people returning this tablet after having this problem.
It is not a hardware problem since its working ok before the update.
Of course tried factory reset twice.
Hope i dont have this problem again, *but i am informing in hope that you fix this in a future update.*

Toshiba sent me the fix for this. Figured I would use Facebook and they sorted a solution straight away.
It requires a complete reset. Not the soft reset from within Android.
I'll post it here as they will check through moderation I guess.
Thanks for sending a private message Ben. For us to get this resolved for you we would advise to perform a reset from the Android system recovery menu, to do the reset please follow these steps:
The reset process will delete any data, settings, and applications on your tablet. You must have a backup of any data you wish to keep before proceeding.
1. Make sure the tablet is off and not in standby.
2. Hold down the Volume Up and Power buttons simultaneously until the two Android icons appear.
3. Use the volume buttons to select the white box on the right.
4. Once selected, press the power button.
5. Use the volume buttons to select wipe cache partition and then press the power button.
6. Select Yes and press the power button.
7. Use the volume buttons to select wipe data/factory reset and then press the power button.
8. Select Yes and press the power button.
9. The tablet will now reset.
If you have any issues after the reset please get back to us as soon as possible!
Its been working well ever since. I guess the cache clean part might be the main one. You'll have to select the reboot yourself as I did at the end.
Might be best to use Facebook i'll see if I can find my post as the response was quick and efficient unlike their responses in here. I.e nowt from them so far.
They needed my name and serial numbers probably to log problems etc.
Message was edited by: bensimmo

Outlook 2010 slow(4-5 minutes) to update folders on first open every morning

Recently migrated to Exchange 2013 and now Outlook 2010 clients, when first opened in the morning will not update folders for 4-5 minutes. If, after opening Outlook you close it and then open it again, the folders up and all is fine until they close
outlook at the end of the day. The next morning, same problem. Anyone see this before?We deployed Exchange 2013 CU3, then last week updated to SP1. I'm not sure that this issue existed before SP1.Another issue is if you
go into account settings and select more setting, you receive a pop up window stating "The action cannot be completed" and if you select OK, then everything is fine and you can see all the settings.
Just wondering if anyone else has seen this.
Thanks

Yes. Same issue with Outlook 2013 as well. I found the problem to be public folders.
They were not used on Exchange 2007, so once all the mailboxes were migrated to Exchange 2013, I removed Exchange 2007 and then shutdown the old server. The problem was that the Exchange 2013 databases were set to look at the Exchange 2007 Public folder
Store which now does not exist.
I had to remove it with ADSIEdit
CN=Services -> CN=Microsoft Exchange -> CN=(your organization name) -> CN=Administrative Groups -> CN=Exchange Administrative Group (FYDIBOHF23SPDLT) -> CN=Databases.
Right-click the mailbox database you want to remove the default public folder database from and choose
Properties
Scroll down until you find the msExchHomePublicMDB attribute. Highlight it and then click
Edit
Click the Clear button so that the value changes to “not set”.
Hope this will save someone some time in the future.

Hotsync fails after Microsoft update

I am using a Treo 650 (Sprint) and running WinXP Pro with Outlook 2002. Everything was working just fine until I got a message from Windows indicating that I needed to update Windows for a critical update. After the update I can no longer get my Treo 650 (Sprint) to connect for a hotsync. When I plug in the chord windows gives a recognition boop that new hardware have been detected; however, when I press the hotsysc button the hotsync fails indicating that it could not find the connection.
I have downloaded the latest software from Palm and installed it but that did not help.
Any help would be greatly apprecitated...
Post relates to: Treo 650 (Sprint)
Post relates to: Treo 650 (Sprint)
This question was solved.
View Solution.

You will need to do a "clean" uninstall of Palm Desktop. Here are the instructions.
You should first make a copy of your data to have just in case something
happens. You can find your data files by going to C:\Program Files\Palm or
Palm One. Highlight your Palm Desktop username and right click and copy.
Then go to your PC desktop, right click on a blank spot and select paste.
For Palm desktop 6.2, look in the following location for the folders and files, my documents, PalmOS desktop. You will find the username folder in this location.
Now you want to uninstall Palm Desktop and remove everything that has to do
with Palm Desktop from your computer. Like the above folder, delete the Palm folder. Once this is done, you will need to delete some registry keys
from your PC Operating System registry.
Word of warning, going here and deleting the wrong thing can cause your PC
to not start up, crashing and deletion of programs and data. If you feel
you are unsure of yourself, see if you have a friend that can help you or a
PC technician that you can pay to help you. This will show them everything
they need to delete. To retain your current Registry settings, we need to do a backup of the Registry.
On the PC, go to start and run type "regedit" without quotes
Highlight MY COMPUTER, go to File --> export. Should pop up with a Save As
box. Current location is fine should be in My Documents or you can change to a location you will remember. In the file name box, type "Regbackup[todaysdate]" i.e. Regbackup07072008. Next, the hard part.
The easiest way to make sure your working with the correct key, highlight the key i.e. palm quick install, and press delete on your keyboard. It will ask you, are
you sure. Say yes. Do the same thing for all keys below.
If you make a mistake, stop what you are doing. And call a PC technician.
BUT do not turn off your computer.
The reg keys are as follows (Note: some of theses reg keys will not be here
but if they are delete them)
* HKEY_CURRENT_USER\Software\U.S. Robotics\Palm Quick Install
* HKEY_CURRENT_USER\Software\U.S. Robotics\PalmOne File Transfer
* HKEY_CURRENT_USER\Software\U.S. Robotics\Pilot Desktop
* HKEY_CURRENT_USER\Software\Palm
* HKEY_CURRENT_USER\Software\Palm, Inc.
* HKEY_CURRENT_USER\Software\PalmDesktopAutorun
* HKEY_CURRENT_USER\Software\palmOne
* HKEY_CURRENT_USER\Software\PalmSource
* HKEY_LOCAL_MACHINE\Software\PalmSource or anything else that says palm
Next reboot your computer
Then reinstall your Palm desktop from the CD and do a hotsync. If it asks
you for a username and you synced your device before, put in 'test" if you
did not sync before you create a hotsync name.
For reference purposes, click on the following link for the support page for your device on the kb.palm.com webpage
http://kb.palm.com/SRVS/NUA/launchTab.asp?t=home&fn=treo&mn=650&cn=sprint
There are links on the page to the user guide, troubleshooting, how to's, downloads, etc.
Post relates to: Palm i705

Outlook 2010 won't open after installing icloud for windows

Hi,
Installed icloud for windows at work this morning after moving my MM account to icloud at home on my MBP.
Installed ok but after ticking the mail, contacts, calendar and bookmark boxes on icloud for windows Outlook 2010 starts but won't open and stays on the "Processing..." for a long time before I close it.
Also the icloud for windows control panel won't reopen except the time it opens after installation. I have tried removing it and rebooting but after it's installed, if you close the control panel it won't reopen although it's still running in Task Manager. Closing it in Task Manager and restarting doesn't make a difference.
Currently I removed, rebooted and reinstalled and only have the bookmarks ticked and outlook works ok but the control panel still won't reopen.
I am on a exchange server so don't know if this is part of the problem. Not real worried about mail but would like calendars working again.
Very thankful for any help you can offer.

I had the same problem after successfully moving from MobileMe to iCloud yesterday on my PC, ipad and iphone.
Today I couldn't open Outlook 2010. An Outlook dialogue box for my MobileMe email account kept asking for the email password, and although I put the password in, it kept re-appearing.
I turned off Norton spam temporarily, because I noticed Outlook was stuck processing the Norton plug ins at opening, and managed to open Outlook but the programme crashed every time I tried to access my email account settings (I thought I would try to delete the MobileMe email account).
I then opened the Control Panel for iCloud and unchecked the Mail with Outlook box, which has enabled Outlook to work again. The @me.com email account was gone when I checked the email accounts. I never needed to use the @me.com email account anyway.
How frustrating and such a waste of my time.
Does anyone know what difference it makes if the MobileMe/iCloud email is not connected to Outlook? Does it really make any difference when you have your email accounts in the iPad and iPhone anyway?

Problem with Basic Authentication in Web Server 7.0u8

I am using a web application which has inbuilt form based authentication. After entering correct username and password, i get logged in, but then immediatly i see a basic authentication dialog popup. I am seeing this behavior in Sun Web server 7.0u8 as well as Sun Web server 7.0u3.
Any idea what could be the reason behind this? Other app servers like Weblogic , JBoss, Websphere do not show this behavior.

This is the content of the default.acl file. This is the only .acl file that is there in https-<instance_name> directory.
# Copyright 2006 Sun Microsystems, Inc. All rights reserved.
# Use is subject to license terms.
version 3.0;
acl "default";
authenticate (user, group) {
prompt = "Sun Java System Web Server";
allow (read, execute, info) user = "anyone";
allow (list, write, delete) user = "all";
acl "es-internal";
allow (read, execute, info) user = "anyone";
deny (list, write, delete) user = "anyone";

Live Migration Failed After Yum Update on 2.2.2

Hi,
I've live migrated vm's from node2 to node1 (master server). Put node2 into maintenance mode, then reconfigure ntp.conf to sync with our new ntp server. While in maintenance mode, I've also ran yum update which updated the kernel from 2.6.18-128.2.1.4.37.el5xen to 2.6.18-128.2.1.4.44.el5xen. In the process, xen was also updated from 3.4.0-0.1.32.el5 to 3.4.0-0.1.39.el5.
After rebooting, I've put node2 back into active mode. But now I can't live migrate the vm's back into node 2. From node1, ovs_operations.log:
"2012-06-23 11:03:28" INFO=> migrate_vm: vm('/OVS/running_pool/1210_vm05') start...
"2012-06-23 11:03:29" INFO=> xen_migrate_vm: migrate with ssl enabled failed, do failover(no ssl). vm('/var/ovs/mount/54DA5753709A48B3BFAEE65C2EAECCE0/running_pool/1210_vm05') -> tgt_srv('node2')
"2012-06-23 11:03:30" ERROR=> xen_migrate_vm: failed. vm('/var/ovs/mount/54DA5753709A48B3BFAEE65C2EAECCE0/running_pool/1210_vm05') -> tgt_srv('node2') =><Exception: xen_migrate_vm: migrate without ssl failed either.>
From node2 ovs_operations.log:
"2012-06-23 11:03:30" INFO=> ha_join_dlm_domain: =>success
"2012-06-23 11:03:30" ERROR=> ha_set_dlm_lock:failed. lock('6f1cb211-ecef-4ac6-af2b-091fc6fd5966') name('1210_vm05')=> <Exception: create lock('/dlm/ovm/f1cb211ecef4ac6af2b091fc6fd5966') failed. <OSError: [Errno 26] Text file busy: '/dlm/ovm/f1cb211ecef4ac6af2b091fc6fd5966'>
Is this due to the different xen versions after the update? How can I live migrate the vm's back to node2 so that I can take node1 into maintenance mode to reconfigure ntp.conf and run yum update?
Thanks!

The next thing to try is to work though the steps in [[Error loading web sites]]. Though if this is happening on all of your computers it might have something to do with your internet connection. Maybe resetting that will help.

Outlook 2003 Client connections fail after a while, requiring reboot

I have Windows 2003 Server terminal servers in several sites, with Outlook 2003 as email clients. Server is Exchange 2010, located in my main site. The remote site terminal servers are connected through WAN links that are 5 Mbps connections,
with generally very low usage compared to capacity.
Outlook works properly for 2 - 3 days for the remote site users, but then, their connections start to drop, and they see "Outlook is trying to connect the the exchange server ..." systray messages, and they lose their email. Can't see their
inbox contents, though sometimes the tree gets populated. The only fix is to reboot the terminal server.
Similar terminal servers at the main site do not experience this.
The backstory is that I recently migrated users from Exchange2003 to Exchange2010. On exchange 2003 we never had this problem.
What is going on here?

Hi,
From your description, I would like to clarify the following things:
1. Make sure that these problematic users use Microsoft Office Outlook 2003 Service Pack 2 or later version.
2. The default Exchange Server 2010 RTM configuration requires RPC encryption. However, Microsoft Office Outlook 2003 does not use RPC encryption by default. You need to update an existing Outlook 2003 profile manually so that it uses RPC encryption with
Exchange 2010.
For more information about it, here is a helpful KB for your reference.
Outlook connection issues with Exchange 2010 mailboxes because of the RPC encryption requirement
https://support.microsoft.com/kb/2006508?wa=wsignin1.0
Hope this can be helpful to you.
Best regards,
Amy Wang
TechNet Community Support

802.1x port authentication failing after getting a access-accept packet

Hi all,
Im not 100% sure what the hell is going on here.
Any idea's or help will be appreciated.
Heres the topology.
1 x windows 2012 NPS
1x 3750X
1x Windows 7 x64
data flow
<laptop> - - [gi 1/0/13]<3750X>[gi 1/0/48]- -[gi 5/39]<6513>[po 1] - - [po 4]<6509><5/1> - - <VMWARE>[NPS Server]
The switch that is doing the authentication is the 3750X. Here is the IOS version.
Switch Ports Model SW Version SW Image
* 1 54 WS-C3750X-48 15.2(1)E C3750E-UNIVERSALK9-M
A wireshark trace on the NPS server shows that the packets are arriving and being sent back
Wireshark on a mirror of the trunk port connecting the 6513. It also shows packets being sent and arriving. access-accept packets are being recieved.
As you can see in the debug output, the switch is getting a access-accept, then it is stating a AAA failure.
here is a debug output as you plug in the laptop.
Oct 24 10:53:44.653: dot1x-ev:[Gi1/0/13] Interface state changed to DOWN
Oct 24 10:53:44.653: dot1x-ev:[Gi1/0/13] No DOT1X subblock found for port down
Oct 24 10:53:45.643: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0/13, changed state to down
Oct 24 10:53:46.641: %LINK-3-UPDOWN: Interface GigabitEthernet1/0/13, changed state to down
Oct 24 10:53:47.538: dot1x-ev:[Gi1/0/13] Interface state changed to UP
Oct 24 10:53:47.564: dot1x-packet:[6431.500e.9b00, Gi1/0/13] queuing an EAPOL pkt on Auth Q
Oct 24 10:53:47.572: dot1x-ev:DOT1X Supplicant not enabled on GigabitEthernet1/0/13
Oct 24 10:53:47.572: dot1x-packet:EAPOL pak rx - Ver: 0x1 type: 0x1
Oct 24 10:53:47.572: dot1x-packet: length: 0x0000
Oct 24 10:53:47.572: dot1x-ev:[Gi1/0/13] Dequeued pkt: Int Gi1/0/13 CODE= 0,TYPE= 0,LEN= 0
Oct 24 10:53:47.572: dot1x-ev:[Gi1/0/13] Received pkt saddr =6431.500e.9b00 , daddr = 0180.c200.0003, pae-ether-type = 888e.0101.0000
Oct 24 10:53:47.572: dot1x-ev:[Gi1/0/13] Couldn't find the supplicant in the list
Oct 24 10:53:47.572: dot1x-ev:[6431.500e.9b00, Gi1/0/13] New client detected, sending session start event for 6431.500e.9b00
Oct 24 10:53:47.572: AAA/BIND(00000047): Bind i/f
Oct 24 10:53:47.580: dot1x-ev:[6431.500e.9b00, Gi1/0/13] Sending create new context event to EAP for 0x15000045 (6431.500e.9b00)
Oct 24 10:53:47.580: EAP-EVENT: Received context create from LL (Dot1x-Authenticator) (0x15000045)
Oct 24 10:53:47.580: EAP-AUTH-EVENT: Received AAA ID 0x00000047 from LL
Oct 24 10:53:47.580: EAP-AUTH-AAA-EVENT: Assigning AAA ID 0x00000047
Oct 24 10:53:47.580: EAP-AUTH-AAA-EVENT: CTS not enabled on interface Gi1/0/13
Oct 24 10:53:47.580: EAP-AUTH-EVENT: Received Session ID "C0A846660000004700DF6030" from LL
Oct 24 10:53:47.580: EAP-AUTH-EVENT: Setting authentication mode: Passthrough
Oct 24 10:53:47.580: eap_authen : initial state eap_auth_initialize has enter
Oct 24 10:53:47.580: EAP-EVENT: Allocated new EAP context (handle = 0xE8000047)
Oct 24 10:53:47.580: dot1x-ev:[6431.500e.9b00, Gi1/0/13] Created a client entry (0x15000045)
Oct 24 10:53:47.580: dot1x-ev:[6431.500e.9b00, Gi1/0/13] Dot1x authentication started for 0x15000045 (6431.500e.9b00)
Oct 24 10:53:47.580: %AUTHMGR-5-START: Starting 'dot1x' for client (6431.500e.9b00) on Interface Gi1/0/13 AuditSessionID C0A846660000004700DF6030
Oct 24 10:53:47.580: EAP-EVENT: Received EAP event 'EAP_AUTHENTICATOR_START' on handle 0xE8000047
Oct 24 10:53:47.580: eap_authen : during state eap_auth_initialize, got event 25(eapStartTmo)
Oct 24 10:53:47.580: @@@ eap_authen : eap_auth_initialize -> eap_auth_select_action
Oct 24 10:53:47.580: eap_authen : during state eap_auth_select_action, got event 20(eapDecisionPropose)
Oct 24 10:53:47.580: @@@ eap_authen : eap_auth_select_action -> eap_auth_propose_method
Oct 24 10:53:47.580: eap_authen : idle during state eap_auth_propose_method
Oct 24 10:53:47.580: @@@ eap_authen : eap_auth_propose_method -> eap_auth_method_request
Oct 24 10:53:47.580: eap_authen : idle during state eap_auth_method_request
Oct 24 10:53:47.580: @@@ eap_authen : eap_auth_method_request -> eap_auth_tx_packet
Oct 24 10:53:47.580: EAP-AUTH-EVENT: Current method = Identity
Oct 24 10:53:47.580: EAP-EVENT: Sending LL (Dot1x-Authenticator) event 'EAP_CUSTOMIZE_ID_REQUEST' on handle 0xE8000047
Oct 24 10:53:47.580: eap_authen : idle during state eap_auth_tx_packet
Oct 24 10:53:47.580: @@@ eap_authen : eap_auth_tx_packet -> eap_auth_idle
Oct 24 10:53:47.589: EAP-AUTH-TX-PAK: Code:REQUEST ID:0x1 Length:0x0005 Type:IDENTITY
Oct 24 10:53:47.589: EAP-EVENT: Started 'Authenticator ReqId Retransmit' timer (30s) for EAP sesion handle 0xE8000047
Oct 24 10:53:47.589: EAP-EVENT: Started EAP tick timer
Oct 24 10:53:47.589: EAP-EVENT: Sending LL (Dot1x-Authenticator) event 'EAP_TX_PACKET' on handle 0xE8000047
Oct 24 10:53:47.597: dot1x-ev:[Gi1/0/13] Sending EAPOL packet to group PAE address
Oct 24 10:53:47.597: dot1x-ev:[Gi1/0/13] Sending out EAPOL packet
Oct 24 10:53:47.597: dot1x-packet:EAPOL pak Tx - Ver: 0x3 type: 0x0
Oct 24 10:53:47.597: dot1x-packet: length: 0x0005
Oct 24 10:53:47.597: dot1x-packet:EAP code: 0x1 id: 0x1 length: 0x0005
Oct 24 10:53:47.597: dot1x-packet: type: 0x1
Oct 24 10:53:47.597: dot1x-packet:[6431.500e.9b00, Gi1/0/13] EAPOL packet sent to client 0x15000045
Oct 24 10:53:47.606: dot1x-packet:[6431.500e.9b00, Gi1/0/13] Queuing an EAPOL pkt on Authenticator Q
Oct 24 10:53:47.606: dot1x-packet:EAPOL pak rx - Ver: 0x1 type: 0x0
Oct 24 10:53:47.606: dot1x-packet: length: 0x001F
Oct 24 10:53:47.606: dot1x-ev:[Gi1/0/13] Dequeued pkt: Int Gi1/0/13 CODE= 2,TYPE= 1,LEN= 31
Oct 24 10:53:47.606: dot1x-ev:[Gi1/0/13] Received pkt saddr =6431.500e.9b00 , daddr = 0180.c200.0003, pae-ether-type = 888e.0100.001f
Oct 24 10:53:47.606: dot1x-packet:EAPOL pak rx - Ver: 0x1 type: 0x0
Oct 24 10:53:47.606: dot1x-packet: length: 0x001F
Oct 24 10:53:47.606: dot1x-ev:[6431.500e.9b00, Gi1/0/13] Response sent to the server from 0x15000045
Oct 24 10:53:47.606: EAP-EVENT: Received LL (Dot1x-Authenticator) event 'EAP_RX_PACKET' on handle 0xE8000047
Oct 24 10:53:47.606: EAP-AUTH-RX-PAK: Code:RESPONSE ID:0x1 Length:0x001F Type:IDENTITY
Oct 24 10:53:47.606: Payload: 47454E4552414C5C72616E64792E636F ...
Oct 24 10:53:47.606: eap_authen : during state eap_auth_idle, got event 1(eapRxPacket)
Oct 24 10:53:47.606: @@@ eap_authen : eap_auth_idle -> eap_auth_received
Oct 24 10:53:47.606: EAP-AUTH-EVENT: EAP Response received by context 0xE8000047
Oct 24 10:53:47.606: EAP-AUTH-EVENT: EAP Response type = Identity
Oct 24 10:53:47.606: EAP-EVENT: Stopping 'Authenticator ReqId Retransmit' timer for EAP sesion handle 0xE8000047
Oct 24 10:53:47.606: eap_authen : during state eap_auth_received, got event 10(eapMethodData)
Oct 24 10:53:47.606: @@@ eap_authen : eap_auth_received -> eap_auth_method_response
Oct 24 10:53:47.606: EAP-AUTH-EVENT: Received peer identity: GENERAL\randy.coburn.admin
Oct 24 10:53:47.606: EAP-EVENT: Sending LL (Dot1x-Authenticator) event 'EAP_IDENTITY' on handle 0xE8000047
Oct 24 10:53:47.606: eap_authen : during state eap_auth_method_response, got event 13(eapMethodEnd)
Oct 24 10:53:47.606: @@@ eap_authen : eap_auth_method_response -> eap_auth_select_action
Oct 24 10:53:47.606: eap_authen : during state eap_auth_select_action, got event 19(eapDecisionPass)
Oct 24 10:53:47.606: @@@ eap_authen : eap_auth_select_action -> eap_auth_passthru_init
Oct 24 10:53:47.606: eap_authen : during state eap_auth_passthru_init, got event 22(eapPthruIdentity)
Oct 24 10:53:47.614: @@@ eap_authen : eap_auth_passthru_init -> eap_auth_aaa_req
Oct 24 10:53:47.614: EAP-EVENT: Sending LL (Dot1x-Authenticator) event 'EAP_GET_PEER_MAC_ADDRESS' on handle 0xE8000047
Oct 24 10:53:47.614: EAP-AUTH-AAA-EVENT: Adding Audit-Session-ID "C0A846660000004700DF6030" to RADIUS Req
Oct 24 10:53:47.614: EAP-AUTH-AAA-EVENT: Added Audit-Session-ID
Oct 24 10:53:47.614: EAP-AUTH-AAA-EVENT: Adding IDB "0x070B90F8" to RADIUS Req
Oct 24 10:53:47.614: EAP-AUTH-AAA-EVENT: Added IDB
Oct 24 10:53:47.614: EAP-EVENT: Sending LL (Dot1x-Authenticator) event 'EAP_CUSTOMIZE_AAA_REQUEST' on handle 0xE8000047
Oct 24 10:53:47.614: EAP-AUTH-AAA-EVENT: eap_auth_aaa_authen_request_shim aaa_service 19, eap aaa_list handle 0, mlist handle 0
Oct 24 10:53:47.614: AAA/AUTHEN/8021X (00000000): Pick method list 'default'
Oct 24 10:53:47.614: EAP-AUTH-AAA-EVENT: Request sent successfully
Oct 24 10:53:47.614: eap_authen : during state eap_auth_aaa_req, got event 24(eapAAAReqOk)
Oct 24 10:53:47.614: @@@ eap_authen : eap_auth_aaa_req -> eap_auth_aaa_idle
Oct 24 10:53:47.614: RADIUS/ENCODE(00000000):Orig. component type = Invalid
Oct 24 10:53:47.614: RADIUS/ENCODE(00000000): Unsupported AAA attribute hwidb
Oct 24 10:53:47.614: RADIUS/ENCODE(00000000): Unsupported AAA attribute aaa-authen-type
Oct 24 10:53:47.614: RADIUS/ENCODE(00000000): Unsupported AAA attribute aaa-authen-service
Oct 24 10:53:47.614: RADIUS/ENCODE(00000000): Unsupported AAA attribute clid-mac-addr
Oct 24 10:53:47.614: RADIUS/ENCODE(00000000): Unsupported AAA attribute target-scope
Oct 24 10:53:47.614: RADIUS/ENCODE(00000000): Unsupported AAA attribute aaa-unique-id
Oct 24 10:53:47.614: RADIUS(00000000): Config NAS IP: 0.0.0.0
Oct 24 10:53:47.614: RADIUS(00000000): sending
Oct 24 10:53:47.614: RADIUS/ENCODE: Best Local IP-Address 192.168.70.102 for Radius-Server 192.168.19.121
Oct 24 10:53:47.614: RADIUS(00000000): Send Access-Request to 192.168.19.121:1645 id 1645/21, len 288
Oct 24 10:53:47.614: RADIUS: authenticator F1 BA E5 31 71 54 BF 1A - A2 B1 5E 1A 63 72 1E 72
Oct 24 10:53:47.614: RADIUS: User-Name [1] 28 "GENERAL\randy.coburn.admin"
Oct 24 10:53:47.614: RADIUS: Service-Type [6] 6 Framed [2]
Oct 24 10:53:47.614: RADIUS: Vendor, Cisco [26] 27
Oct 24 10:53:47.614: RADIUS: Cisco AVpair [1] 21 "service-type=Framed"
Oct 24 10:53:47.614: RADIUS: Framed-MTU [12] 6 1500
Oct 24 10:53:47.614: RADIUS: Called-Station-Id [30] 19 "AC-F2-C5-75-7D-0D"
Oct 24 10:53:47.614: RADIUS: Calling-Station-Id [31] 19 "64-31-50-0E-9B-00"
Oct 24 10:53:47.614: RADIUS: EAP-Message [79] 33
Oct 24 10:53:47.614: RADIUS: 02 01 00 1F 01 47 45 4E 45 52 41 4C 5C 72 61 6E 64 79 2E 63 6F [GENERAL\randy.co]
Oct 24 10:53:47.622: RADIUS: 62 75 72 6E 2E 61 64 6D 69 6E [ burn.admin]
Oct 24 10:53:47.622: RADIUS: Message-Authenticato[80] 18
Oct 24 10:53:47.622: RADIUS: EE 52 4D ED B9 06 F3 CE 63 AC 9D 73 24 1B A7 ED [ RMcs$]
Oct 24 10:53:47.622: RADIUS: EAP-Key-Name [102] 2 *
Oct 24 10:53:47.622: RADIUS: Vendor, Cisco [26] 49
Oct 24 10:53:47.622: RADIUS: Cisco AVpair [1] 43 "audit-session-id=C0A846660000004700DF6030"
Oct 24 10:53:47.622: RADIUS: Vendor, Cisco [26] 20
Oct 24 10:53:47.622: RADIUS: Cisco AVpair [1] 14 "method=dot1x"
Oct 24 10:53:47.622: RADIUS: NAS-IP-Address [4] 6 192.168.70.102
Oct 24 10:53:47.622: RADIUS: NAS-Port [5] 6 60000
Oct 24 10:53:47.622: RADIUS: NAS-Port-Id [87] 23 "GigabitEthernet1/0/13"
Oct 24 10:53:47.622: RADIUS: NAS-Port-Type [61] 6 Ethernet [15]
Oct 24 10:53:47.622: RADIUS(00000000): Sending a IPv4 Radius Packet
Oct 24 10:53:47.622: RADIUS(00000000): Started 10 sec timeout
Oct 24 10:53:47.622: RADIUS: Received from id 1645/21 192.168.19.121:1645, Access-Accept, len 66
Oct 24 10:53:47.622: RADIUS: authenticator 92 F6 07 AF C1 AB 0B 4C - 1D 9E A0 D1 01 36 27 26
Oct 24 10:53:47.622: RADIUS: Class [25] 46
Oct 24 10:53:47.622: RADIUS: 76 E3 06 66 00 00 01 37 00 01 02 00 C0 A8 13 79 00 00 00 00 00 00 00 00 00 00 00 00 01 CE CF F8 1F 7B 75 41 00 00 00 00 00 00 00 50 [ vf7y{uAP]
Oct 24 10:53:47.622: RADIUS(00000000): Received from id 1645/21
Oct 24 10:53:47.622: EAP-EVENT: eap_aaa_reply
Oct 24 10:53:47.622: EAP-AUTH-AAA-EVENT: Reply received session_label 72000033
Oct 24 10:53:47.622: EAP-EVENT: Received AAA event 'EAP_AAA_FAIL' on handle 0xE8000047
Oct 24 10:53:47.622: eap_authen : during state eap_auth_aaa_idle, got event 8(eapAAAFail)
Oct 24 10:53:47.622: @@@ eap_authen : eap_auth_aaa_idle -> eap_auth_failure
Oct 24 10:53:47.631: EAP-EVENT: Received get canned status from lower layer (0xE8000047)
Oct 24 10:53:47.631: EAP-AUTH-TX-PAK: Code:FAILURE ID:0x1 Length:0x0004
Oct 24 10:53:47.631: EAP-AUTH-EVENT: FAIL for EAP method ID: 1, name: , on handle 0xE8000047
Oct 24 10:53:47.631: EAP-EVENT: Sending LL (Dot1x-Authenticator) event 'EAP_FAIL' on handle 0xE8000047
Oct 24 10:53:47.631: dot1x-ev:[6431.500e.9b00, Gi1/0/13] Received an EAP Fail
Oct 24 10:53:47.639: %DOT1X-5-FAIL: Authentication failed for client (6431.500e.9b00) on Interface Gi1/0/13 AuditSessionID C0A846660000004700DF6030
Oct 24 10:53:47.639: dot1x-packet:[6431.500e.9b00, Gi1/0/13] Added username in dot1x
Oct 24 10:53:47.639: dot1x-packet:[6431.500e.9b00, Gi1/0/13] Dot1x did not receive any key data
Oct 24 10:53:47.639: dot1x-ev:[6431.500e.9b00, Gi1/0/13] Processing client delete for hdl 0x15000045 sent by Auth Mgr
Oct 24 10:53:47.639: dot1x-ev:[6431.500e.9b00, Gi1/0/13] 6431.500e.9b00: sending canned failure due to method termination
Oct 24 10:53:47.639: EAP-EVENT: Received get canned status from lower layer (0xE8000047)
Oct 24 10:53:47.639: dot1x-ev:[Gi1/0/13] Sending EAPOL packet to group PAE address
Oct 24 10:53:47.639: dot1x-ev:[Gi1/0/13] Sending out EAPOL packet
Oct 24 10:53:47.639: dot1x-packet:EAPOL pak Tx - Ver: 0x3 type: 0x0
Oct 24 10:53:47.639: dot1x-packet: length: 0x0004
Oct 24 10:53:47.639: dot1x-packet:EAP code: 0x4 id: 0x1 length: 0x0004
Oct 24 10:53:47.639: dot1x-packet:[6431.500e.9b00, Gi1/0/13] EAPOL canned status packet sent to client 0x15000045
Oct 24 10:53:47.639: dot1x-ev:[6431.500e.9b00, Gi1/0/13] Deleting client 0x15000045 (6431.500e.9b00)
Oct 24 10:53:47.639: %AUTHMGR-7-STOPPING: Stopping 'dot1x' for client 6431.500e.9b00 on Interface Gi1/0/13 AuditSessionID C0A846660000004700DF6030
Oct 24 10:53:47.639: %AUTHMGR-5-FAIL: Authorization failed or unapplied for client (6431.500e.9b00) on Interface Gi1/0/13 AuditSessionID C0A846660000004700DF6030
Oct 24 10:53:47.648: dot1x-ev:[6431.500e.9b00, Gi1/0/13] Delete auth client (0x15000045) message
Oct 24 10:53:47.648: EAP-EVENT: Received free context (0xE8000047) from LL (Dot1x-Authenticator)
Oct 24 10:53:47.648: dot1x-ev:Auth client ctx destroyed
Oct 24 10:53:47.648: EAP-EVENT: Received LL (Dot1x-Authenticator) event 'EAP_DELETE' on handle 0xE8000047
Oct 24 10:53:47.648: EAP-AUTH-EVENT: Freed EAP auth context
Oct 24 10:53:47.648: EAP-EVENT: Freed EAP context
Oct 24 10:53:48.621: EAP-EVENT: Stopped EAP tick timer
Oct 24 10:53:49.485: %LINK-3-UPDOWN: Interface GigabitEthernet1/0/13, changed state to up
Oct 24 10:53:50.491: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0/13, changed state to up
Oct 24 10:53:53.528: dot1x-ev:[Gi1/0/13] Interface state changed to DOWN
Oct 24 10:53:53.528: dot1x-ev:[Gi1/0/13] No DOT1X subblock found for port down
Oct 24 10:53:54.518: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0/13, changed state to down
Oct 24 10:53:55.524: %LINK-3-UPDOWN: Interface GigabitEthernet1/0/13, changed state to down

Hi Jatin,
See below the data that you have requested.
show run bits.
aaa new-model
aaa authentication dot1x default group radius
aaa session-id common
clock timezone BST 0 0
clock summer-time UTC recurring last Sun Mar 1:00 last Sun Oct 2:00
dot1x system-auth-control
interface GigabitEthernet1/0/13
switchport access vlan 80
switchport mode access
authentication port-control auto
dot1x pae authenticator
spanning-tree portfast
interface GigabitEthernet1/0/48
switchport trunk encapsulation dot1q
switchport trunk native vlan 70
switchport mode trunk
radius server NPS1
address ipv4 192.168.19.121 auth-port 1645 acct-port 1646
timeout 10
key thesecret
ip default-gateway 192.168.70.1
SW1-randy#show auth sessions interface gig 1/0/13
Interface MAC Address Method Domain Status Fg Session ID
Gi1/0/13 803f.5d09.189e N/A UNKNOWN Unauth C0A846660000002F00251DBC
SW1-randy#Show mac address-table Interface GigabitEthernet1/0/13
 Mac Address Table
Vlan Mac Address Type Ports
80 803f.5d09.189e DYNAMIC Drop
SW1-randy#ping 192.168.19.121
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 192.168.19.121, timeout is 2 seconds:
Success rate is 100 percent (5/5), round-trip min/avg/max = 1/2/8 ms
Here is a wireshark of the accept packet.
Message was edited by: randy coburn
Added wireshark trace

MacBook Pro 2010 crashing / kernal panic after Mavericks update

After we updated our MacBook Pro (late 2010) to mavericks, it has a kernal panic crash not just on wake/sleep, but also when a program is opened (usually 2 or 3rd program).
it happens when plugged in and when unplugged. I have tried a few of the "fixes" but nothing has helped. Doesn't seem to be the power issues some have sugested. Also, doesn't appear to be a HP issues others have also had.
Any help would be GREATLY appreciated.
Here is the lastest report:
Anonymous UUID: 4D4DD5DC-0E7B-7032-F79E-CF122DA0B93D
Tue Jan 14 11:30:57 2014
panic(cpu 0 caller 0xffffff7f8dda5fac): "GPU Panic: [<None>] 3 3 7f 0 0 0 0 3 : NVRM[0/1:0:0]: Read Error 0x00000100: CFG 0xffffffff 0xffffffff 0xffffffff, BAR0 0xd2000000 0xffffff80fd7df000 0x0a5480a2, D0, P3/4\n"@/SourceCache/AppleGraphicsControl/AppleGraphicsControl-3.4.12/src/Apple MuxControl/kext/GPUPanic.cpp:127
Backtrace (CPU 0), Frame : Return Address
0xffffff80fd5f30f0 : 0xffffff800ba22f69
0xffffff80fd5f3170 : 0xffffff7f8dda5fac
0xffffff80fd5f3240 : 0xffffff7f8c4ba53d
0xffffff80fd5f3300 : 0xffffff7f8c586d9e
0xffffff80fd5f3340 : 0xffffff7f8c586dfc
0xffffff80fd5f33b0 : 0xffffff7f8c80b5be
0xffffff80fd5f34e0 : 0xffffff7f8c5aad41
0xffffff80fd5f3500 : 0xffffff7f8c4c108d
0xffffff80fd5f35b0 : 0xffffff7f8c4bebae
0xffffff80fd5f37b0 : 0xffffff7f8c4c0cb4
0xffffff80fd5f38a0 : 0xffffff7f8d403980
0xffffff80fd5f3900 : 0xffffff7f8d400702
0xffffff80fd5f3990 : 0xffffff7f8d3eb137
0xffffff80fd5f39c0 : 0xffffff7f8d3a8497
0xffffff80fd5f39e0 : 0xffffff7f8d3b8d30
0xffffff80fd5f3a10 : 0xffffff7f8d3b8bd1
0xffffff80fd5f3a60 : 0xffffff7f8d3b8a8e
0xffffff80fd5f3ab0 : 0xffffff7f8d3b75cd
0xffffff80fd5f3ad0 : 0xffffff7f8d3daf37
0xffffff80fd5f3b00 : 0xffffff800becb735
0xffffff80fd5f3b90 : 0xffffff800becd76f
0xffffff80fd5f3bf0 : 0xffffff800becb28f
0xffffff80fd5f3d40 : 0xffffff800bab6008
0xffffff80fd5f3e50 : 0xffffff800ba26bb1
0xffffff80fd5f3e80 : 0xffffff800ba139b5
0xffffff80fd5f3ef0 : 0xffffff800ba1e003
0xffffff80fd5f3f70 : 0xffffff800bac921d
0xffffff80fd5f3fb0 : 0xffffff800baf3e26
 Kernel Extensions in backtrace:
 com.apple.driver.AppleMuxControl(3.4.12)[A4934A66-0E30-36E9-984A-650481102449]@ 0xffffff7f8dd98000->0xffffff7f8ddaafff
 dependency: com.apple.driver.AppleGraphicsControl(3.4.12)[661E3C87-5B97-3272-88FF-B9BA9B6E2 4ED]@0xffffff7f8dd90000
 dependency: com.apple.iokit.IOACPIFamily(1.4)[045D5D6F-AD1E-36DB-A249-A346E2B48E54]@0xfffff f7f8c324000
 dependency: com.apple.iokit.IOPCIFamily(2.8)[447B4896-16FF-3616-95A2-1C516B2A1498]@0xffffff 7f8c0ba000
 dependency: com.apple.iokit.IOGraphicsFamily(2.3.6)[38E388A5-92D6-3388-B799-F2498E582287]@0 xffffff7f8c416000
 dependency: com.apple.driver.AppleBacklightExpert(1.0.4)[E04639C5-D734-3AB3-A682-FE66694C66 53]@0xffffff7f8dd93000
 com.apple.nvidia.classic.NVDAResmanTesla(8.1.8)[0A1B6F41-168D-307A-BABD-162F3B3 C2786]@0xffffff7f8c469000->0xffffff7f8c6d8fff
 dependency: com.apple.iokit.IOPCIFamily(2.8)[447B4896-16FF-3616-95A2-1C516B2A1498]@0xffffff 7f8c0ba000
 dependency: com.apple.iokit.IONDRVSupport(2.3.6)[86BA68C6-18DD-30A1-ABF6-54597AD6C277]@0xff ffff7f8c459000
 dependency: com.apple.iokit.IOGraphicsFamily(2.3.6)[38E388A5-92D6-3388-B799-F2498E582287]@0 xffffff7f8c416000
 com.apple.nvidia.classic.NVDANV50HalTesla(8.1.8)[3666E0FC-87C7-3329-BD8C-2F1ADE D100A4]@0xffffff7f8c6e3000->0xffffff7f8c98ffff
 dependency: com.apple.nvidia.classic.NVDAResmanTesla(8.1.8)[0A1B6F41-168D-307A-BABD-162F3B3 C2786]@0xffffff7f8c469000
 dependency: com.apple.iokit.IOPCIFamily(2.8)[447B4896-16FF-3616-95A2-1C516B2A1498]@0xffffff 7f8c0ba000
 com.apple.GeForceTesla(8.1.8)[7DAF283F-6FD3-3783-B3CC-D23964F1B9B8]@0xffffff7f8 d3a0000->0xffffff7f8d46afff
 dependency: com.apple.iokit.IOPCIFamily(2.8)[447B4896-16FF-3616-95A2-1C516B2A1498]@0xffffff 7f8c0ba000
 dependency: com.apple.iokit.IONDRVSupport(2.3.6)[86BA68C6-18DD-30A1-ABF6-54597AD6C277]@0xff ffff7f8c459000
 dependency: com.apple.iokit.IOGraphicsFamily(2.3.6)[38E388A5-92D6-3388-B799-F2498E582287]@0 xffffff7f8c416000
 dependency: com.apple.nvidia.classic.NVDAResmanTesla(8.1.8)[0A1B6F41-168D-307A-BABD-162F3B3 C2786]@0xffffff7f8c469000
BSD process name corresponding to current thread: WindowServer
Mac OS version:
13B42
Kernel version:
Darwin Kernel Version 13.0.0: Thu Sep 19 22:22:27 PDT 2013; root:xnu-2422.1.72~6/RELEASE_X86_64
Kernel UUID: 1D9369E3-D0A5-31B6-8D16-BFFBBB390393
Kernel slide: 0x000000000b800000
Kernel text base: 0xffffff800ba00000
System model name: MacBookPro6,2 (Mac-F22586C8)
System uptime in nanoseconds: 17960847219104
last loaded kext at 10900382690295: com.apple.filesystems.smbfs 2.0.0 (addr 0xffffff7f8c394000, size 335872)
loaded kexts:
com.apple.filesystems.smbfs 2.0.0
com.apple.filesystems.msdosfs 1.9
com.apple.driver.AudioAUUC 1.60
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.driver.AppleTyMCEDriver 1.0.2d2
com.apple.driver.AGPM 100.14.11
com.apple.filesystems.autofs 3.0
com.apple.iokit.IOBluetoothSerialManager 4.2.0f6
com.apple.driver.AppleMikeyHIDDriver 124
com.apple.GeForceTesla 8.1.8
com.apple.driver.AppleHDAHardwareConfigDriver 2.5.3fc1
com.apple.driver.AppleUpstreamUserClient 3.5.13
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.driver.AppleMikeyDriver 2.5.3fc1
com.apple.driver.AppleHDA 2.5.3fc1
com.apple.nvidia.NVDAStartup 8.1.8
com.apple.driver.AppleMuxControl 3.4.12
com.apple.driver.AppleBacklight 170.3.5
com.apple.driver.AppleMCCSControl 1.1.12
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleHWAccess 1
com.apple.driver.AppleLPC 1.7.0
com.apple.iokit.IOBluetoothUSBDFU 4.2.0f6
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.2.0f6
com.apple.driver.AppleSMCLMU 2.0.4d1
com.apple.driver.AppleIntelHDGraphics 8.1.8
com.apple.driver.AppleIntelHDGraphicsFB 8.1.8
com.apple.driver.AppleSMCPDRC 1.0.0
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.driver.SMCMotionSensor 3.0.4d1
com.apple.driver.AppleUSBTCButtons 240.2
com.apple.driver.AppleUSBTCKeyEventDriver 240.2
com.apple.driver.AppleUSBTCKeyboard 240.2
com.apple.driver.AppleFileSystemDriver 3.0.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 35
com.apple.driver.AppleUSBCardReader 3.3.5
com.apple.driver.AppleIRController 325.7
com.apple.iokit.SCSITaskUserClient 3.6.0
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.4.0
com.apple.driver.AppleUSBHub 650.4.4
com.apple.driver.AppleFWOHCI 4.9.9
com.apple.iokit.AppleBCM5701Ethernet 3.6.9b9
com.apple.driver.AppleAHCIPort 2.9.5
com.apple.driver.AirPort.Brcm4331 700.20.22
com.apple.driver.AppleUSBEHCI 650.4.1
com.apple.driver.AppleUSBUHCI 650.4.0
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleACPIButtons 2.0
com.apple.driver.AppleRTC 2.0
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleSMBIOS 2.0
com.apple.driver.AppleACPIEC 2.0
com.apple.driver.AppleAPIC 1.7
com.apple.driver.AppleIntelCPUPowerManagementClient 216.0.0
com.apple.nke.applicationfirewall 153
com.apple.security.quarantine 3
com.apple.driver.AppleIntelCPUPowerManagement 216.0.0
com.apple.AppleGraphicsDeviceControl 3.4.12
com.apple.kext.triggers 1.0
com.apple.iokit.IOSerialFamily 10.0.7
com.apple.nvidia.classic.NVDANV50HalTesla 8.1.8
com.apple.nvidia.classic.NVDAResmanTesla 8.1.8
com.apple.driver.DspFuncLib 2.5.3fc1
com.apple.vecLib.kext 1.0.0
com.apple.iokit.IOAudioFamily 1.9.4fc11
com.apple.kext.OSvKernDSPLib 1.14
com.apple.iokit.IOSurface 91
com.apple.driver.AppleGraphicsControl 3.4.12
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.iokit.IOBluetoothFamily 4.2.0f6
com.apple.driver.AppleSMBusController 1.0.11d1
com.apple.driver.AppleSMBusPCI 1.0.12d1
com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.2.0f6
com.apple.iokit.IOFireWireIP 2.2.5
com.apple.iokit.IONDRVSupport 2.3.6
com.apple.driver.AppleHDAController 2.5.3fc1
com.apple.iokit.IOGraphicsFamily 2.3.6
com.apple.iokit.IOHDAFamily 2.5.3fc1
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.driver.IOPlatformPluginFamily 5.5.1d27
com.apple.driver.AppleSMC 3.1.6d1
com.apple.driver.AppleUSBMultitouch 240.6
com.apple.iokit.IOSCSIBlockCommandsDevice 3.6.0
com.apple.iokit.IOUSBMassStorageClass 3.6.0
com.apple.iokit.IOUSBHIDDriver 650.4.4
com.apple.driver.AppleUSBMergeNub 650.4.0
com.apple.driver.AppleUSBComposite 650.4.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.6.0
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOAHCISerialATAPI 2.6.0
com.apple.iokit.IOSCSIArchitectureModelFamily 3.6.0
com.apple.iokit.IOUSBUserClient 650.4.4
com.apple.iokit.IOFireWireFamily 4.5.5
com.apple.iokit.IOEthernetAVBController 1.0.3b3
com.apple.driver.mDNSOffloadUserClient 1.0.1b4
com.apple.iokit.IOAHCIFamily 2.6.0
com.apple.iokit.IO80211Family 600.34
com.apple.iokit.IONetworkingFamily 3.2
com.apple.iokit.IOUSBFamily 650.4.4
com.apple.driver.AppleEFINVRAM 2.0
com.apple.driver.AppleEFIRuntime 2.0
com.apple.iokit.IOHIDFamily 2.0.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 278.10
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.AppleKeyStore 2
com.apple.driver.DiskImages 371.1
com.apple.iokit.IOStorageFamily 1.9
com.apple.iokit.IOReportFamily 21
com.apple.driver.AppleFDEKeyStore 28.30
com.apple.driver.AppleACPIPlatform 2.0
com.apple.iokit.IOPCIFamily 2.8
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.pthread 1
com.apple.kec.corecrypto 1.0
Model: MacBookPro6,2, BootROM MBP61.0057.B0F, 2 processors, Intel Core i5, 2.53 GHz, 8 GB, SMC 1.58f17
Graphics: Intel HD Graphics, Intel HD Graphics, Built-In, 288 MB
Graphics: NVIDIA GeForce GT 330M, NVIDIA GeForce GT 330M, PCIe, 256 MB
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1067 MHz, 0x859B, 0x435435313236344243313036372E4D313646
Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1067 MHz, 0x859B, 0x435435313236344243313036372E4D313646
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x93), Broadcom BCM43xx 1.0 (5.106.98.100.22)
Bluetooth: Version 4.2.0f6 12982, 3 services, 23 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en1
Serial ATA Device: Hitachi HTS545050B9SA02, 500.11 GB
Serial ATA Device: MATSHITADVD-R UJ-898
USB Device: Hub
USB Device: BRCM2070 Hub
USB Device: Bluetooth USB Host Controller
USB Device: Internal Memory Card Reader
USB Device: Apple Internal Keyboard / Trackpad
USB Device: Hub
USB Device: IR Receiver
USB Device: Built-in iSight
Thunderbolt Bus:

15” MBP Mid 2010 models have been recalled for GPU issues. See https://discussions.apple.com/docs/DOC-5681.
Official Apple statement: http://support.apple.com/kb/TS4088
Print out a copy of your kernel panic and a copy of this Knowledge Base article and go to an Apple store or Apple Authorizes Service Provider with your machine and the documentation.
Genius reservation http://www.apple.com/retail/geniusbar/ .
or find an Apple Authorized Service Provider https://locate.apple.com/country
If it has been three years since your date of purchase then you are past the date covered by the recall but sometimes they honor it anyway.
More on this from another thread: https://discussions.apple.com/thread/5763560?tstart=0

Microsoft Outlook 2010 cannot connect to exchange server

I have just got Microsoft Outlook 2010 and I cannot open it.
When I click to open it I get an error message saying that "the connection to microsoft exchange is unavailable. Microsoft must be online or connected to complete this action"
I have checked my connection www.testexchangeconnectivity.com
and everything is OK here. I can connect through owa and I use the exchange server on my ipad and my phone so I have no idea what is going on.
I have tried lots of other solutions that have been on forums but none of them have worked for me. Please can you help?
Kind Regards
Damian
PS apologies for the green text but I copied and pasted the web link and could not get rid of the green text afterwards!

Hi,
If you test on www.testexchangeconnectivity.com is ok.
Maybe it has some issue on Client setting.
So please check if client setting is correct and if you fill the DNS server on client and can resolve the Exchange URL.
Wendy Liu
TechNet Community Support

Boot fails after security update

Greetings,
In installed the most recent security update this morning, and after restarting, my machine won't boot up.
I've followed the existing threads (in case you've also had this problem, the most informative was here:
http://discussions.apple.com/thread.jspa?threadID=1545171 )
Here's my machine's current state; I'd appreciate any input!
I booted to single user mode, and checked the disks using /sbin/fsck -fy . there were no errors reported.
I booted from my Install Disk 1, repaired the disk (again, no errors), and verified the disk.
Now, it still does not boot independently; it stalls at the apple logo. Safe boot does not work. It doesn't appear to be a PRAM or SMC issue.
What should my next move be? Thanks again!

There are no guarantees, but following this procedure when installing updates and upgrades on your Mac, or even re-installing them, will go a long way towards avoiding unpleasant after effects and ‘post-update stress disorder’.
It is also worth noting that it is an extreme rarity for updates to cause upsets to your system, but they may well reveal pre-existing ones, particularly those of which you may have been unaware. If you are actually aware of any glitches, make sure they are fixed before proceeding further.
So before you do anything else:
If you can, make a full backup first.
Turn off sleep mode for both screen and hard disk.
Disconnect all peripherals except your keyboard and mouse.
1. Repair Permissions (in Disk Utility)
2. Verify the state of your hard disk using Disk Utility. If any faults are reported, restart from your install disk (holding down the C key), go to Disk Utility, and repair your startup disk. Restart again to get back to your startup disk.
At least you can now be reasonably certain that your system does not contain any obvious faults that might cause an update/upgrade to fail.
3. Download the correct version of the COMBO or security update from the Apple download site. If your car runs on gasoline you would not want to fill the tank with diesel, so don’t try to install the PPC updater on an Intel Mac!
If you prefer to download updates via Software Update in the Apple menu (which would ensure that the correct version for your Mac was being downloaded), it is not recommended to allow SU to install major (or even minor) updates automatically. Set Software Update to just download the updater without immediately installing it. There is always the possibility that the combined download and install (which can be a lengthy process) might be interrupted by a power outage or your cat walking across the keyboard, and an interrupted install will almost certainly cause havoc. Once it is downloaded, you can install at a time that suits you. You should make a backup copy of the updater on a CD in case you ever need a reinstall.
Using the Combo updater ensures that all system files changed since the original 10.4.0 are included, and any that may have been missed out or subsequently damaged will be repaired. The Delta updater, although a temptingly smaller download, only takes you from the previous version to the new one, i.e. for example from 10.4.10 to 10.4.11. Software Update will generally download the Delta updater only. The preferable Combo updater needs to be downloaded from Apple's download site.
Now proceed as follows:
4. Close all applications.
5. Unplug all peripherals except your keyboard and mouse.
6. Install the update/upgrade. Do not under any circumstances interrupt this procedure. Do not do anything else on your computer while it is installing. Be patient.
7. When it ask for a restart to complete the installation, click restart. This can take longer than normal, there are probably thousands of files to overwrite and place in the correct location. Do nothing while this is going on.
8. Once your Mac is awake, repair permissions again, and you should be good to go!
If your Mac seems slightly sluggish or ‘different’, perform a second restart. It can’t hurt and is sometimes efficacious!
9. Open a few of your most used applications and check that all is OK. In this connection please remember that not all manufacturers of third party applications and plug-ins, add-ons, haxies etc, will have had time to do any necessary rewrites to their software to make them 10.4.10. compliant. Give them a weeks or two while you regularly check their websites for updates. This applies particularly to plug-ins for Safari 3.
N.B. Do not attempt to install two different updates at the same time as each may have different routines and requirements. Follow the above recommendations for each update in turn.
Lastly, Apple's own article on the subject of Software Update may also be useful reading:
http://docs.info.apple.com/article.html?artnum=106695
If you are updating Safari (or just have):
Input Managers from third parties can do as much harm as good. They use a security loophole to reach right into your applications' code and change that code as the application starts up. If you have installed an OS update and Safari is crashing, the very first thing to do is clear out your InputManagers folders (both in your own Library and in the top-level /Library), log out and log back in, and try again.
So, disable all third party add-ons before updating Safari, as they may not have been updated yet for the new version. Add them back one by one. If something goes awry, remove it again and check on the software manufacturer's website for news of an update to match your version of Safari. Remember: Tiger up to 10.4.10 used Safari 2.0.4 or, if you downloaded it, Safari 3.0.3 beta. Safari 10.4.11 used Safari 3.0.4 which was not a beta. If Safari 3.1.1 on 10.4.11 is not the fastest browser you have ever used, then something is wrong!
Moreover, trying to revert to Safari 3.0.4 (or worse still, version 2) when running 10.4.11 or 10.5 can have repercussions, as Safari 3.1.1 uses a completely different webkit on which other applications like iChat, Mail and Dashboard Widgets etc also rely, and may entail you having to reinstall an earlier operating system.
Most errors reported here after an update are due to an unrepaired or undetected inherent fault in the system, and/or a third party ad-on. Two such add-on that have been frequently mentioned here for causing such problems are Piclens and Pithhelmet. If you have them, trash them.
Additional tips on software installation here:
http://docs.info.apple.com/article.html?artnum=106692
To reiterate, Input Managers reach right into an application and alter its code. This puts the behavior of the affected application outside the control and responsibility of its developers: a recipe for problems. That's not to say that issues absolutely will ensue as a result of Input Managers, but you, as a user, must decide. If the functionality of a specific Input Manager or set thereof is really important to you, you may well choose to assume the associated risk.
Again, the advice is to remove all Input Managers from the following directories:
• /Library/InputManagers
• ~/Library/InputManagers
especially prior to system updates (they can always be added back one-by-one later).

Outlook 2010 Basic Authentication Fails after Server Update

Similar Messages

Maybe you are looking for