Outlook 2010 cached mode cannot see GAL but Outlook 2007 can via Exchange 2010

Hi,
I have a problem similar to
this but with a different cause.
Our OAB config looks good from both Outlook 2007 and Outlook 2010. Both can see the GAL in non-cached mode but in cached mode only 2007 can see the GAL. In 2010 it's just not there. Even the same user can only see it in 2007.
Does anyone have any suggestions as to why this is?
Cheers,
Rob

Hi,
I have got the same issue, that I can't see updated OAB in outlook 2010.
Can you share the detailed path of the locations you have mentioned here:
In Office 2010, this happens but these values also exist in the [Service1] section and are blank:
OfflineAddressBookPath=
OfflineFolderPathAndFilename=
And how do we add locations to these paths?
Thank you in advance.

Similar Messages

"Sent Items" folder can not be synced up in time for Outlook 2013 cache mode

Hi,
I found a strange problem in Outlook 2013 cache mode. Hope anyone can help me find out if it is the new design of outlook 2013 or outlook 2013 issue.
I am using Exchange 2013 and Outlook 2013 client. I created two outlook profiles in two machines separately with a same exchange user, the difference for the two profiles is one is in cache mode, and the other is in uncache mode.
I launched outlook using the profiles in the two machines, go to "Sent Items" folder, I assume there are some messages in this folder in your mailbox, do below steps:
1. modify one of the messages in the "Sent Items" folder from the profile in cache mode, in this case, the changes to the message will be synced up to the profile which is in uncache mode immediately.
2. modify another messages in the "Sent Items" folder from the profile in uncache mode, in this case, the changes will never be synced up to the profile in cache mode.
In the second action above, even if I clicked "Send/Receive" button, and waited for whole night, the changes was not synched up to the cached mode side. The way I can get the latest changes to the "Sent Items" folder is "clear
offline items" and click "Update folder" or I need to remove and create the profile again.
All in all, the changes to the items in "Sent Items" folder of Outlook 2013 which was did from cache mode will be synched up to exchange server side immediately, but the changes which was did from exchange server side will
never be synched up to the cache mode side unless the end-user clear the offline items and update folder or create a new profile again.
Any help would be appreciated, thanks in advance!
Best Regards, Emily

The first behavior is by design even in the previous version of Office.
"1. modify one of the messages in the "Sent Items" folder from the profile in cache mode, in this case, the changes to the message will be synced up to the profile which is in uncache mode immediately."
Uploading local changes ---- By default, when you make a change locally, that change is synced to the server after 15 seconds. When you make another change within those 15 seconds, then the timer is reset again. As now you
could in theory hold off synchronization indefinitely, there is the maximum timer. This timer is started after the first change that you made and when it reaches 60 seconds, then a synchronization will occur to upload all the changes that you have made thus
far, no matter how many seconds are left on the upload timer.
However, in second section, this should be a downloading server changes
behavior ---- When a server side mailbox change occurs, Outlook is notified by the Exchange server of this change. By default, Outlook will then wait 30 seconds before synchronizing these changes. If there are any other changes occurring
at the server level within these 30 seconds, then these changes are downloaded at the same time as well.
At this time, please directly modify the message in sender items folders through Web-based access and then wait over 30 seconds to check if the items changes from cache mode profile. Please also test if we can reproduce that in other folder.
Let me know the result. Thanks.
Cheers,
Tony Chen
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please contact
[email protected]

X-Fi Fatal1ty Pro cannot see 5.1 Dolby Digital input via Optical link (mods, please he

X-Fi Fatalty Pro cannot see 5. Dolby Digital input via Optical link. I am pumping my Xbox360 through the Digital I/O dongle and every thing works OK using Dolby Stereo, outputing to my 5. analog speakers. However, it does NOT work when choosing Dolby Digital 5.. My SPDIF tab just says unknown input.
Please help, this is very frustrating...

Ok, for those who also wanted to know the outcome, I though I'd post.
I was told that the dongle cannot decode 5. to analog, but the Dri've Upgrade and the Console Upgrade could (at $80/$80 vs. $5).
Great.
So what I want to know is this:? what chipset or connection is Creative putting in the Dri've Upgrade and Console Upgrade? It seems to me that the card should be doing the decoding, not the type of optical port. If it's getting the signal, then what is the problem? Is is that the flexijack cannot output/input 5. at all, only stereo?
Anyway, the Digital I/O dongle is going back, the thing is useless for my purposes. While I can hear 360 games fine, DVD's on it default to 5. if they have that type of audio, and there is no way to switch it to stereo; it gives me only silence then.
And mods, nothing in my frustration is with you; you seem to be very helpful and responsi've. I just wish the rest of the company would get on the ball.

How do I gift a playlist made of half my own songs and half chosen songs to be purchased? I have tried to find the 'arrow to the right' of the playlist when I select it but cannot see this at all! Can anyone help?

How do I gift a playlist made of half my own songs and half chosen songs to be purchased? I have tried to find the 'arrow to the right' of the playlist when I select it but cannot see this at all! Can anyone help?

This forum is for questions from those managing sites on iTunes U, Apple's service for colleges and universities to post educational material in the iTunes Store. You'll be most likely to get help with this issue if you ask in the general iTunes forums.
Regards.

Can Outlook 2013 cached mode disabled work offline?

Hello
I would like to please someone help me to resolve a concern. I have a client Outlook 2013 cache mode disabled by policy, however when you need to open Outlook without connecting to any network, is not possible and a message that the server is not online.
Is there a way to change this behavior and that an Outlook client that has disabled the cache can work offline?
Many thanks

Hi
No, that is what cached mode is used for.
You can use OWA offline if you are disabling cache mode with policy.

I Can Video Chat but I Cannot see Buddy But I Can Hear Them, What Do I Do ?

I Can Connect with Video Chat but I Cannot see Buddy But I Can Hear Them, What Do I Do ?
kiChat ref (please)
For iChat 3 and iChat and iChat Sharing (iChat 4) Forums
This is for Mac users who are at either 10.4.11 or 10.5.6 and have Perian 1.1.3 Installed
It does not seem PCC or Intel Specific.
As Noted in the Question, the user can make a successful Video chat connection albeit without incoming Video being shown.
The Connection Doctor from iChat Video menu says there is a incoming feed.
Testing and work by Defcom proved this to be the Installation of Perian 1.1.3 from http://www.apple.com/downloads/macosx/video/perian_christopherforsythe.html
Perian 1.1.3 (a Quicktime add-on that uses a System Preferences like Flip4Mac) causes problems in both iChat versions when the OS is at either 10.4.11 or 10.5.6
This includes deliberate installs and automatic updates by the Preferences Panel (In System Preferences)
The Solution
Download and downgrade to Perian 1.1.2 and turn Off Auto Updates in the Preferences Panel
Process
Use the Un-install check box in the Perian Preference Pane panel.
Download the .dmg from this link WARNING THIS IS A DIRECT DOWNLOAD LINK http://perian.cachefly.net/Perian_1.1.2.dmg
Install Perian 1.1.2
Go to the System Preference > Perian pane and disable Automatic Updates
Happy Chatting
10:32 PM Saturday; April 4, 2009

I'm having this same problem, except i've been traveling and video chatting fine, not that i'm finally home i'm trying to vid chat with my friend in america and same deal, all i can see is myself and hear the other person.... and they can hear and see me fine.
both using mac osx
anyone got any ideas??

Tests pass, but iPhone won't autodiscover Exchange 2010.

I have some Exchange 2007 and one Exchange 2010 I am responsible for. As far as I can tell I have ActiveSync and AutoDiscover setup properly. Running the tests here confirms this. With an iPhone I am able to do the "one step autodiscovery" on the Exchange 2007 servers but the Exchange 2010 does the "two step setup" where it fails to get the server name and it has to be put in by hand.
I'm curious if something was changed in 2010 AutoDiscover that breaks iPhone (3G 3.1.2). More likely I have got something misconfigured.
All the DNS names point to the same server, the SSL certificate supports all the names.
Here is my ActiveSync test results against the 2010 server.
Testing Exchange ActiveSync
Exchange ActiveSync was tested successfully
Test Steps
Attempting AutoDiscover and Exchange ActiveSync Test (if requested)
Successfully tested AutoDiscover for Exchange ActiveSync
Test Steps
Attempting each method of contacting the AutoDiscover Service
The AutoDiscover Service was successfully tested.
Test Steps
Attempting to test potential AutoDiscover URL https://pepper.net/AutoDiscover/AutoDiscover.xml
Failed testing this potential AutoDiscover URL
Test Steps
Attempting to resolve the host name pepper.net in DNS.
Host successfully resolved
Additional Details
IP(s) returned: 69.85.246.35
Testing TCP Port 443 on host pepper.net to ensure it is listening and open.
The specified port is either blocked, not listening, or not producing the expected response.
Tell me more about this issue and how to resolve it
Additional Details
A network error occurred while communicating with remote host
Exception Details:
Message: No connection could be made because the target machine actively refused it 69.85.246.35:443
Type: System.Net.Sockets.SocketException
Stack Trace:
at System.Net.Sockets.TcpClient.Connect(String hostname, Int32 port)
at Microsoft.Exchange.Tools.ExRca.Tests.TcpPortTest.PerformTestReally()
Attempting to test potential AutoDiscover URL https://autodiscover.pepper.net/AutoDiscover/AutoDiscover.xml
Testing AutoDiscover URL succeeded
Test Steps
Attempting to resolve the host name autodiscover.pepper.net in DNS.
Host successfully resolved
Additional Details
IP(s) returned: 69.57.51.22
Testing TCP Port 443 on host autodiscover.pepper.net to ensure it is listening and open.
The port was opened successfully.
Testing SSL Certificate for validity.
The certificate passed all validation requirements.
Test Steps
Validating certificate name
Successfully validated the certificate name
Additional Details
Found hostname autodiscover.pepper.net in Certificate Subject Alternative Name entry
Testing certificate date to ensure validity
Date Validation passed. The certificate is not expired.
Additional Details
Certificate is valid: NotBefore = 11/25/2009 1:15:23 PM, NotAfter = 11/26/2011 3:33:48 AM"
Attempting to send AutoDiscover POST request to potential autodiscover URLs.
Successfully Retrieved AutoDiscover Settings by sending AutoDiscover POST.
Test Steps
Attempting to Retrieve XML AutoDiscover Response from url https://autodiscover.pepper.net/AutoDiscover/AutoDiscover.xml for user [email protected]
Successfully Retrieved AutoDiscover XML Response
Additional Details
AutoDiscover Account Settings
XML Response:
<?xml version="1.0"?>
<Autodiscover xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns="http://schemas.microsoft.com/exchange/autodiscover/responseschema/2006">
<Response xmlns="http://schemas.microsoft.com/exchange/autodiscover/mobilesync/responseschema/2006">
<Culture>en:us</Culture>
<User>
<DisplayName>test user</DisplayName>
<EMailAddress>[email protected]</EMailAddress>
</User>
<Action>
<Settings>
<Server>
<Type>MobileSync</Type>
<Url>https://webmail.pepper.net/Microsoft-Server-ActiveSync/</Url>
<Name>https://webmail.pepper.net/Microsoft-Server-ActiveSync/</Name>
</Server>
</Settings>
</Action>
</Response>
</Autodiscover>
Validating Exchange ActiveSync settings
ActiveSync URL https://webmail.pepper.net/Microsoft-Server-ActiveSync/ was successfully validated
Attempting to resolve the host name webmail.pepper.net in DNS.
Host successfully resolved
Additional Details
IP(s) returned: 69.57.51.22
Testing TCP Port 443 on host webmail.pepper.net to ensure it is listening and open.
The port was opened successfully.
Testing SSL Certificate for validity.
The certificate passed all validation requirements.
Test Steps
Validating certificate name
Successfully validated the certificate name
Additional Details
Found hostname webmail.pepper.net in Certificate Subject Alternative Name entry
Testing certificate date to ensure validity
Date Validation passed. The certificate is not expired.
Additional Details
Certificate is valid: NotBefore = 11/25/2009 1:15:23 PM, NotAfter = 11/26/2011 3:33:48 AM"
Testing Http Authentication Methods for URL https://webmail.pepper.net/Microsoft-Server-ActiveSync/
Http Authentication Methods are correct
Additional Details
Found all expected authentication methods and no disallowed methods. Methods Found: Basic
Attempting an ActiveSync session with server
Testing an ActiveSync session completed successfully
Test Steps
Attempting to send OPTIONS command to server
OPTIONS response was successfully received and is valid
Additional Details
Headers received: Allow: OPTIONS,POST
MS-Server-ActiveSync: 14.0
MS-ASProtocolVersions: 2.0,2.1,2.5,12.0,12.1,14.0
MS-ASProtocolCommands: Sync,SendMail,SmartForward,SmartReply,GetAttachment,GetHierarchy,CreateCollection,DeleteCollection,MoveCollection,FolderSync,FolderCreate,FolderDelete,FolderUpdate,MoveItems,GetItemEstimate,MeetingResponse,Search,Settings,Ping,ItemOperations,Provision,ResolveRecipients,ValidateCert
Public: OPTIONS,POST
Content-Length: 0
Cache-Control: private
Date: Fri, 05 Feb 2010 05:11:05 GMT
Server: Microsoft-IIS/7.5
X-AspNet-Version: 2.0.50727
X-Powered-By: ASP.NET
Attempting FolderSync command on ActiveSync session
FolderSync command completed successfully.
Additional Details
Number of Folders: 11
Attempting initial sync (no data) for Inbox folder
Completed Sync Command successfully
Additional Details
Status: 1
Attempting to test GetItemEstimate command for Inbox Folder
Successfully received GetItemEstimate Response from Server
Additional Details
Estimate: 2 messages
Attempting to test Sync of Inbox Folder
Completed Sync Command successfully
Additional Details
Number of items synchronized: 2

http://www.experts-exchange.com/Apple/Hardware/iPhone/Q_24933916.html
Demazter:
Check the security tab of the users in AD and see if inherit permissions is checked.
had a similar problem with my first migration to Exchange 2010 and it was down to a security permission on the Active Directory User account.
In Active Directory Users and Computers right click on the user and select properties then under the security tab and advanced make sure the box is checked for inheritable permissions.
=========================
dmlavigne1:
Demazter is right for existing users that have been upgraded from previous versions of Exchange. If you create a new user in Exchange 2010 IPhone sync will work without additional steps.
When I went to check the security tab in AD, it was not visible. I had to click the View menu then place a check beside Advanced Features.
When I checked the inheritable box, IPhone Sync worked for that existing user.
Note, I checked other users in my AD with mailboxes and some of them had this already checked. The only two that didn't have this box checked were the users that were using the IPhone syncing and were upgraded from Exchange 2007.

All website went "Not Found HTTP Error 404. The requested resource is not found." and the "Firefox cannot load websites but other programs can" page is not help

''dupe of https://support.mozilla.org/en-US/questions/928117''
all website went "Not Found HTTP Error 404. The requested resource is not found." and the "Firefox cannot load websites but other programs can" page is not helping in any ways

A possible cause is security software (firewall,anti-virus) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls
*http://kb.mozillazine.org/Error_loading_websites
You can try to reset (power off/on) the router.

Firefox cannot load websites but other programs can

Firefox cannot load any webpages, but IE can.
I have tried everything suggested. This problem happened befoer I updated Firefox and did not resolve after I updated firefox.
I tried changing internet settings, disabling firewall, and even disabling IVP6, but nothing is working.

Have you already seen [[firefox cannot load websites but other programs can]]
*What exactly happens, or does not happen and do you get any error messages ?
*Is it all websites you have a problem with, or only some ?
* What happens if you work offline, can you load web pages that are saved on your own computer ? <br> (save something with IE, -as HTML web page files - maybe this page, then try opening it with both Firefox and IE)
Can you use firefox to look at your local disk such as (depending on your setup) ''file:///C:/''
Try checking security settings, and security logs, is firefox being blocked ?

Firefox cannot load websites but other browser can

background - family community home pc...mozilla worked great for the longest time (along side IE)...all of a sudden mozilla can't connect to any website...IE always can (yuk)
troublshooting steps (still can't connect to web w/firefox):
1. Removed Mozilla, re-installed, same results
2. Searched for all mozilla folders. Deleted two folders and also daughter's mozilla iphone folder. Removed Mozilla, re-installed, set connection to "no proxy", same results.
3. Ran "House Call" - no malware found.
Help! do not like IE!

Have you already seen [[firefox cannot load websites but other programs can]]
*What exactly happens, or does not happen and do you get any error messages ?
*Is it all websites you have a problem with, or only some ?
* What happens if you work offline, can you load web pages that are saved on your own computer ? <br> (save something with IE, -as HTML web page files - maybe this page, then try opening it with both Firefox and IE)
Can you use firefox to look at your local disk such as (depending on your setup) ''file:///C:/''
Try checking security settings, and security logs, is firefox being blocked ?

Firefox cannot load websites, but other programs can. Listed guide/faq not effective.

I went through the FAQ guide for firefox not loading webpages, but after having changed both boolean setting in the about:config section of the firefox advanced settings, deleting and re-adding it to the program permissions list in my firewall (mcafee antivirus 2011), and even attempting to completely disable the firewall for a period of time, I am still unable to browse the internet on firefox. Internet explorer, however, does work.

Have you already seen [[firefox cannot load websites but other programs can]]
*What exactly happens, or does not happen and do you get any error messages ?
*Is it all websites you have a problem with, or only some ?
* What happens if you work offline, can you load web pages that are saved on your own computer ? <br> (save something with IE, -as HTML web page files - maybe this page, then try opening it with both Firefox and IE)
Can you use firefox to look at your local disk such as (depending on your setup) ''file:///C:/''
Try checking security settings, and security logs, is firefox being blocked ?

After Exchange 2007 Migration to Exchange 2010, OAB is erroring

Hello all,
I migrated from single server Exchange 2007 to single Exchange 2010 2 months ago using a co-existence environment. The 2007 server is still running, but it's not doing anything but SMTP relay, as I am waiting on Oracle admin to point their server at
my new 2010 server. Yesterday, I noticed a new mail enabled user we created was not showing up in the Address Book. He is in the Global Address list when I check it from OWA. And I can see him in my Address book if I search All Users,
instead of the Global Address List. Everytime I try to update the Offline Address Book, I get the following error
OABGen encountered error 80004005 while cleaning the offline address list public folders under /o=2007Server/cn=addrlists/cn=oabs/cn=Default Offline Address Book. Please make sure the public folder database is mounted and replicas exist of the offline
address list folders. No offline address lists have been generated. Please check the event log for more information.
- \Default Offline Address Book
There was a Public Folder on the 2007 server, but I don't think anyone was using it. All of our clients our 2007 or later. Enable Web-based distribution is enabled and Generation server is my new 2010 server. Enable public folder distribution
not enabled.
Any help would be greatly appreciated.

No, the Enable public folder check box is not ticked. However, the link you provided has led me to other clues. The author says "To locate the actual
OAB distribution point on the Client Access Server, the Outlook client will use the autodiscover service." I wonder if still having the CAS role on the old 2007 Exchange Server still installed is causing issues with Autodiscover. Below
are the results of the Test E-mail AutoConfiguration from Outlook.
The Results tab of the Test E-mail AutoConfiguration:
Autoconfiguration found the following settings:
Display Name: User1
Redirect URL: https://Exchange2010.Contoso.com/Autodiscover/Autodiscover.xml
Internal OWA URL: https://Exchange2010.Contoso.com/owa
External OWA URL: https://Exchange2007.Contoso.com/owa
Protocol: Exchange RPC
Server: Exchange2010.Contoso.com
Login Name: user1
Availability Service URL: https://Exchange2010.Contoso.com/EWS/Exchange.asmx
OOF URL: https://Exchange2010.Contoso.com/EWS/Exchange.asmx
OAB URL: https://Exchange2010.Contoso.com/OAB/43e497ff-6fc4-47f8-8e7b-fe252e84ddf6/
Unified Messaging Service URL: https://Exchange2010.Contoso.com/EWS/UM2007Legacy.asmx
Auth Package: Unspecified
Exchange Control Panel URL: https://Exchange2010.Contoso.com/ecp/
ECP Sub URL: ?p=customize/voicemail.aspx&exsvurl=1
ECP Sub URL: ?p=personalsettings/EmailSubscriptions.slab&exsvurl=1
ECP Sub URL: PersonalSettings/DeliveryReport.aspx?exsvurl=1&IsOWA=Is<IsOWA>&MsgID=<MsgID>&Mbx=<Mbx>
ECP Sub URL: ?p=organize/retentionpolicytags.slab&exsvurl=1
Protocol: Exchange HTTP
Server: Exchange2010.Contoso.com
Login Name: user1
SSL: Yes
Mutual Authentication: Yes
Availability Service URL: https://Exchange2007.Contoso.com/ews/exchange.asmx
OOF URL: https://Exchange2007.Contoso.com/ews/exchange.asmx
OAB URL: https://Exchange2010.Contoso.com/OAB/43e497ff-6fc4-47f8-8e7b-fe252e84ddf6
Unified Message Service URL: https://Exchange2007.Contoso.com/ews/UM2007Legacy.asmx
Auth Package: Basic
Certificate Principal Name: msstd:Exchange2010.Contoso.com
Exchange Control Panel URL: https://Exchange2007.Contoso.com
ECP Sub URL: ?p=customize/voicemail.aspx&exsvurl=1
ECP Sub URL: ?p=personalsettings/EmailSubscriptions.slab&exsvurl=1
ECP Sub URL: Personalsettings/DeliveryReport.aspx?exsvurl=1&IsOWA=<IsOWA>&MsgID=<MsgID>&Mbx=<Mbx>
ECP Sub URL: ?p=organize/retentionpolicytags.slab&exsvurl=1
The Log tab of the Test E-mail AutoConfiguration:
[email protected]
Attempting URL https://Exchange2007.Contoso.com/Autodiscover/Autodiscover.xml found through SCP
Autodiscover to https://Exchange2007.Contoso.com/Autodiscover/Autodiscover.sml starting
GetLastError=0; httpStatus=401.
GetLastError=0; httpStatus=302.
Autodiscover to https://Exchange2007.Contoso.com/Autodiscover/Autodiscover.xml Failed (0x800C8204)
Autodiscover URL redirection to https://Exchange2010.Contoso.com/Autodiscover/Autodiscover.xml
Autodiscover to https://Exchange2010.Contoso.com/Autodiscover/Autodiscover.xml starting
GetLastError=0; httpsStatus=200
Autodiscover to https://carus.Contoso.com/Autodiscover/Autodiscover.xml Succeeded (0x00000000)
The XML tab of the Test E-mail AutoConfiguration:
<?xml version="1.0" encoding="utf-8"?>
<Autodiscover xmlns="http://schemas.microsoft.com/exchange/autodiscover/responseschema/2006">
<Response xmlns="http://schemas.microsoft.com/exchange/autodiscover/outlook/responseschema/2006a">
<User>
<DisplayName>Chad Wingo</DisplayName>
<LegacyDN>/o=Exchange2007/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Recipients/cn=cwingo</LegacyDN>
<AutoDiscoverSMTPAddress>[email protected]</AutoDiscoverSMTPAddress>
<DeploymentId>c389bc85-adbe-4481-aa25-1fbc209a6fde</DeploymentId>
</User>
<Account>
<AccountType>email</AccountType>
<Action>settings</Action>
<Protocol>
<Type>EXCH</Type>
<Server>Exchange2010.contoso.com</Server>
<ServerDN>/o=Exchange2007/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Configuration/cn=Servers/cn=Exchange2010</ServerDN>
<ServerVersion>738280F7</ServerVersion>
<MdbDN>/o=Exchange2007/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Configuration/cn=Servers/cn=Exchange2010/cn=Microsoft Private MDB</MdbDN>
<PublicFolderServer>Exchange2010.contoso.com</PublicFolderServer>
<AD>DATA.domainskc.com</AD>
<ASUrl>https://Exchange2010.contoso.com/EWS/Exchange.asmx</ASUrl>
<EwsUrl>https://Exchange2010.contoso.com/EWS/Exchange.asmx</EwsUrl>
<EcpUrl>https://Exchange2010.contoso.com/ecp/</EcpUrl>
<EcpUrl-um>?p=customize/voicemail.aspx&exsvurl=1</EcpUrl-um>
<EcpUrl-aggr>?p=personalsettings/EmailSubscriptions.slab&exsvurl=1</EcpUrl-aggr>
<EcpUrl-mt>PersonalSettings/DeliveryReport.aspx?exsvurl=1&IsOWA=<IsOWA>&MsgID=<MsgID>&Mbx=<Mbx></EcpUrl-mt>
<EcpUrl-ret>?p=organize/retentionpolicytags.slab&exsvurl=1</EcpUrl-ret>
<OOFUrl>https://Exchange2010.contoso.com/EWS/Exchange.asmx</OOFUrl>
<UMUrl>https://Exchange2010.contoso.com/EWS/UM2007Legacy.asmx</UMUrl>
<OABUrl>http://Exchange2010.contoso.com/OAB/43e497ff-6fc4-47f8-8e7b-fe252e84ddf6/</OABUrl>
</Protocol>
<Protocol>
<Type>EXPR</Type>
<Server>Exchange2010.contoso.com</Server>
<SSL>On</SSL>
<AuthPackage>Basic</AuthPackage>
<ASUrl>https://Exchange2007.contoso.com/ews/exchange.asmx</ASUrl>
<EwsUrl>https://Exchange2007.contoso.com/ews/exchange.asmx</EwsUrl>
<EcpUrl>https://Exchange2007.contoso.com/ecp/</EcpUrl>
<EcpUrl-um>?p=customize/voicemail.aspx&exsvurl=1</EcpUrl-um>
<EcpUrl-aggr>?p=personalsettings/EmailSubscriptions.slab&exsvurl=1</EcpUrl-aggr>
<EcpUrl-mt>PersonalSettings/DeliveryReport.aspx?exsvurl=1&IsOWA=<IsOWA>&MsgID=<MsgID>&Mbx=<Mbx></EcpUrl-mt>
<EcpUrl-ret>?p=organize/retentionpolicytags.slab&exsvurl=1</EcpUrl-ret>
<OOFUrl>https://Exchange2007.contoso.com/ews/exchange.asmx</OOFUrl>
<UMUrl>https://Exchange2007.contoso.com/ews/UM2007Legacy.asmx</UMUrl>
<OABUrl>https://Exchange2010.contoso.com/OAB/43e497ff-6fc4-47f8-8e7b-fe252e84ddf6/</OABUrl>
</Protocol>
<Protocol>
<Type>WEB</Type>
<Internal>
<OWAUrl AuthenticationMethod="Basic, Fba">https://Exchange2010.contoso.com/owa/</OWAUrl>
<Protocol>
<Type>EXCH</Type>
<ASUrl>https://Exchange2010.contoso.com/EWS/Exchange.asmx</ASUrl>
</Protocol>
</Internal>
<External>
<OWAUrl AuthenticationMethod="Fba">https://Exchange2007.contoso.com/owa/</OWAUrl>
<Protocol>
<Type>EXPR</Type>
<ASUrl>https://Exchange2007.contoso.com/ews/exchange.asmx</ASUrl>
</Protocol>
</External>
</Protocol>
</Account>
</Response>
</Autodiscover>
Unified Messaging role has not been installed on 2010 Exchange Server yet and UM has been uninstalled on 2007 Exchange Server. The URLs are just left in IIS I'm guessing.
I have also noticed that this directory has not updated since the 11/12/2013 C:\Program Files\Microsoft\Exchange Server\V14\ExchangeOAB. While this directory continues to update C:\Program Files\Microsoft\Exchange Server\V14\ClientAccess\OAB

Delete only 1 Auto-Complete email address for everyone's email accounts - perhaps via Exchange 2010 or Group Policy?

Hello
I have an exchange 2010 server and clients use outlook 2007 or 2010 for emails.
I recently deleted an account with the Exchange 2010 server and created another with the same name but a different address.
Now people can't send mail to this new email address because it's cached on their outlook profiles... but it does work after they cleared the cache and send their requests then.
Is there a way that I can clear this one email address from everyone's cached auto-complete list on exhcange or via Group Policy so that it works for all of them? I don't want to clear all of their auto-complete lists.
Thanks,

As far as I know, there isn't any way to clear only one auto-complete cache from Exchange side or Group policy.
Thanks,
Evan
Evan Liu
TechNet Community Support

Migration from Exchange 2007 SP3 to Exchange 2010

Hello,
We are planning a single server migration from Exchange 2007 SP3 to Exchange 2010. I'll be building the 2010 server on a 2008 R2 box. My question is, can I make the jump directly to Exchange 2010 SP3, or do I need to install exchange 2010 SP1 first
- migrate from 2007 SP3, and then install SP3 for exchange 2010 later?
Thanks,
Eric

@ Hasan
Dimdik - TAT,
That's not correct at all, you can migrate exchange server 2007 SP3 and RollUp Update 10 minimum to Exchange Server 2013 with minimum CU1.
Cheers,
Gulab Prasad,
Technology Consultant
Blog:
www.exchangeranger.com
Twitter:
LinkedIn:
Check out CodeTwo’s tools for Exchange admins
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

SCOM 2007 to monitor Exchange 2010 Backups

Hi
Is there any way of getting SCOM 2007 to monitor Exchange 2010 backups. I'm using Commvault as the backup solution, was wondering if there's anything i can check for to ensure successful or failed bakcups

Hi
DPM will write its own events. You can create your own management pack for SCOM to monitor the events on the Exchange server but SCOM has an exchange management pack you can install.

Outlook 2010 cached mode cannot see GAL but Outlook 2007 can via Exchange 2010

Similar Messages

Maybe you are looking for