Outlook 2010 does not appear as an option in IntelliSync

I am trying to sync my calendar with Outlook 2010 (32 bit). When I go into DM 6.0 calendar setup, only ASCII and Yahoo! appear as available decktop options. How do I get DM to see my installed Outlook so that I can sync? Thanks!
Tech info:
DM v6.0.0.43
Storm 9530
Windows 7 (64-bit)
Outlook 2010 (32-bit)
My ultimate goal is to sync to Google calendar so I can view online, by syncing to Outlook, I can then export and upload to Google. Please let me know if there is an alternate way.
Thanks!

You might give this a try:
http://www.blackberry.com/btsc/KB02362
1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

Similar Messages

  • Outlook 2010 does not appear in Sync list

    I am trying to sync my Outlook 2010 contacts using BB Desktop Manager. When I go to Address Book Setup to select the desktop application, I am offered a choice of Outlook Express as well as some others. However, Outlook (not Outlook Express) is not listed. I tried to use the OExpress option, but this did not work (it is not installed in any event).
    Any thoughts on how I can solve this?
    thanks!
    (PS: using a BB Curve 8520)

    Hi and Welcome to the Community!
    Please see this KB to see if it applies to your situation:
    KB24040 Support for Microsoft Office 2010 Click-to-Run installation
    Good luck and let us know!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Manage Account does not appear in the options sync tab. How do I manage my account to get the recovery key?

    I cannot sync my Firefox 18 desktop with iPad or iPhone browsers. I have tried everything suggested on the Web and have tried safe mode as well. When I enter the three-line synch code, I get a sync failure. I have deleted my account and then set up a new account without success. Manage Account does not appear in the options sync tab. How do I manage my account to get the recovery key?
    I’ve spent hours on this and am considering using Chrome as my regular browser since I have no trouble syncing Chrome with apps. Help appreciated.

    You can only inspect the sync key via manage account if this device is has been setup and is connected to the sync server.
    You can find the sync account password and the sync (recovery) key in the password manager on computers where a sync account with a specific e-mail address has been set up.
    Look for:
    * chrome://weave (Mozilla Services Password)
    * chrome://weave (Mozilla Services Encryption Passphrase)
    You can look at this version of the about:synckey extension that I have modified to show the sync key in current Firefox versions (desktop and mobile).
    * http://www.freefilehosting.net/aboutsynckey-11-fnfx
    * [[/questions/942893]]

  • Outlook 2010 does not receive rss messages

    Hi,I have recently uninstalled a freeware VPN.
    After that outlook 2010 does not receive messages (bizarrely firefox works fine, but internet explorer does not)!
    I keep receiving error code: 0x800c0008
    I made sure that it is properly uninstalled.
    Thank you for your help!

    Hi,
    Have you subscribed any RSS Feeds before? Please go to File > Info > Account settings > "RSS Feeds" Tab and check if all the feeds are healthy (connection successful?). Remove them to check
    whether you would still receive the error code anymore.
    More information:  http://office.microsoft.com/en-001/outlook-help/unsubscribe-from-an-rss-feed-HA010024271.aspx
    The following KB could help you solve your issue.
    Troubleshooting error messages that you receive when you try to send and receive e-mail in Outlook and Outlook Express
    http://support.microsoft.com/kb/813514
    In addition, I would like to suggest you ask this in the Outlook Forums:
    http://social.technet.microsoft.com/Forums/en/outlook/threads
    Hope it helps.
    Regards,
    Blair Deng
    Blair Deng
    TechNet Community Support

  • Outlook does not appear as an option when setting up synchronization

    I need help.  I recently bought the BB Curve 8330.  When I attempt to set up the sync configuations between Outlook and the BB, Outlook does not appear as a choice.  What do I need to do to get Outlook to appear?  I called Verizon customer service and they were not much help.  Please help.
    I am running MS Vista 2007.
    Solved!
    Go to Solution.

    HI,
    On your Blackberry go to OPTIONS/ABOUT the OS version looks like 4.x.x.xxx.
    On your outlook are you running any connectors (business, hotmail etc) ?
    5. Close and open Blackberry Desktop Manager to perform the synchronization process again and Outlook will be in the list...
    Vista commands
    1. Right-Click on Command Prompt in Start Menu and choose Run as Administrator
    2. Navigate to C:\Program Files\Research in Motion\Blackberry\IS71 Connectors\MS Outlook Connector by typing: c:\> CD program      files\research in motion\blackberry\is71 connectors\ms outlook connector
    3. Then type in the command prompt, type: regsvr32 MsOutlookConnector.fil
    4. If the registration is successful, the following message displays:
    DllRegisterSErver in msoutlookconnector.fil succeeded.
    5. Close and open Blackberry Desktop Manager to perform the synchronization process again and Outlook will be in the list...
    If you receive the error message DllRegisterServer failed with error code 0x80070005 - you do not have admin rights. So, it's important that you run command prompt as admin. 
    Let me know about the device and the version of desktop software.
    Message Edited by Bifocals on 10-30-2008 11:41 PM
    Click Accept as Solution for posts that have solved your issue(s)!
    Be sure to click Like! for those who have helped you.
    Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

  • Suddenly share desktop does not appear as an option

    All of a sudden today when I tried to share my deskktop in lync 2010 the "desktop" option does not appear when I click on share.  Only "program" or "show staging" appears.  Do you know how to fix that?

    Hi,
    Did you solve the issue with the help of Ali provided?
    Did the issue happen only for you or for multiple users?
    You can login Lync client on other computer with your Lync account to have a test.
    If the issue happen only for you, please also check if there have any specific conferencing policies linked to the issued Lync user.
    Best Regards,
    Eason Huang
    Eason Huang
    TechNet Community Support

  • HT2731 I have a student who is trying to set up an account however it is asking for Credit Card information.  The choice of NONE does not appear as an option with the credit cards.  Any assistance?

    I have a student trying to set up an App Store account (she has an Apple ID), however she is being asked for credit card information.  The option of NONE does not appear as one of the choices with the other credit cards.
    Any assistance?

    There are instrctions on this page for how to create a new account (it won't work with existing account) without giving a credit card number : http://support.apple.com/kb/HT2534 e.g. select a free app in the store and click on 'create Apple id' when 'buying' it.

  • Check Mark does not appear in sign option

    I was using the check mark option in the "I need to sign" section of Adobe Reader X and now that option does not appear. All that's there is add text and signature. What happened? Where did it go?
    Adobe Reader X   Version 10.1.9

    Hi Sterenberg,
    Have you tried uninstall and reinstall.
    You may try the latest version of Reader XI.
    Regards,
    Ajlan Huda.

  • Default account setting in Outlook 2010 does not work when composing new messages?

    Hello,
    I am currently using Outlook 2010 (not beta). I have two accounts, a google imap account and a pop3 account.  I have designated my IMAP account as my default account.  As I understand it, this means that when I create a new email,
    it should default to being sent from my IMAP account.  However, whenever I create a new email, it defaults to the account which I am currently viewing in Outlook.  In other words, if I am currently viewing the pop3 inbox, when I compose an email,
    it will default send from that account.  Conversely, when I compose an email while viewing the IMAP inbox, it will default send from that account. 
    Any ideas as to what is going on?  This is rather frustrating because I only rarely send with my pop3 account--only when replying/forwarding email received with that account or other unique situations.  Is there a way to make Outlook be true to
    sending from the default account, without doing something drastic like disabling the secondary account?
    Thanks in advance.
    Rom

    Of course it's a bug.
    Computing Dictionary
    bug definition
    programming 
     An unwanted and unintended property of a program or piece ofhardware, especially one that causes it to malfunction.
    The behaviour itself may be considered a feature by Microsoft, though I disagree, but the fact that one thinks one is specifying a "default" account that is not then used as the default in all cases is clearly a bug.
    It is astonishing to me that in the plethora of options, advanced options and advanced advanced options there is not a checkbox to enable this new behaviour with the default being unchecked.
    Microsoft does it again.

  • Contacts created on my outlook 2010 do not appear on my ios

    When I create contacts on my Outlook 2010 they do not appear on my ios and also I am not getting the refesh button on Outlook

    Hello Fejoto,
    It sounds like you are adding new contacts to your Outlook but they are not syncing over to your iOS device. I would use the troubleshooting from the following article to help troubleshoot that, assuming you are not using iCloud, named:
    Troubleshooting Sync Services on Windows with Microsoft Outlook 2003, Outlook 2007, or Outlook 2010
    http://support.apple.com/kb/ts2776
    Thank you for using Apple Support Communities.
    Take care,
    Sterling

  • Blocked Senders feature in Outlook 2010 does not work

    I have a specific blocked sender
    [email protected] listed in my Blocked Senders list, but emails from that email
    address still go to my Inbox instead of the Junk E-mail folder. 
    We use Exchange for email, and Outlook 2010 as the client.
    Note: this sender is blocked for a specific sender that he configured through Junk E-mail Options in Outlook 2010, and this sender is not blocked at the server level.
    I only have one account set up in Outlook. 
    What do I need to do to get Blocked Senders / Junk E-mail working in Outlook?
    Thanks,
    Elizabeth

    Hi,
    From your description, I suggest you try to check the total size of blocked sender list. As total size of all lists combined cannot exceed 512K. Once the 512K limit
    is reached, Outlook alerts you and additional addresses aren't saved until you remove some from the list.
    If your issue is caused by the limited size, you can add a new registry key value to the following registry key:
    HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\MSExchangeIS\ParametersSystem\
    Add a new DWORD value of Type Max Extended Rule Size and edit the Value Data, entering the maximum size (in bytes) you want to allow.
    If your issue is not related to limited size, try to keep your junk e-mail filter updated. Each version of Microsoft Outlook that contains a junk e-mail filter receives updates to the data
    file (outlfltr.dat) as part of the Microsoft-wide monthly update released on the second Tuesday of each month. The updated outlfltr.dat is the result of the evaluation of hundreds of thousands of spam messages and constantly increases the filter “catch”
    rate for incoming junk email.
    The recommended way to obtain updates to the Outlook Junk E-mail filter is by turning on the Automatic Updates option in the Windows Security Center.
    If you have done all above but it still not work, try to create a new outlook profile to test this issue.
     Go to Start > Control Panel, click Mail. The title bar of the Mail Setup dialog box contains the name of the current profile. To select a different
    existing profile, click Show Profiles, select the profile name, and then click Properties.
     Click Show Profiles. Choose Prompt for a profile to be used.
     Click Add.
     Type a name for the profile, and then click OK.
     Start Outlook, and choose this new profile.
    Sincerely,
    Harry 

  • Btopenzone-h does not appear as an option

    I have tried connecting to both the 'btopenzone' and 'btfon' options, but they don't work, have 'no internet access' showing. 'btopenzone-h' used to work, but it has not appeared for 3 days now.

    gordon1984 wrote:
    I have tried connecting to both the 'btopenzone' and 'btfon' options, but they don't work, have 'no internet access' showing. 'btopenzone-h' used to work, but it has not appeared for 3 days now.
    Which BT Home hub version are you using?
    There are some useful help pages here, for BT Broadband customers only, on my personal website.
    BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

  • Why It does not appear the custom option in choosing the document size in Illustrator cs4

    When I choose "New Document" in Illustrator CS4 and try to change the document size the "custom" option isn´t available. The only available options are standar sizes.

    Typing numbers in the box highlighted in orange (below) does not work?
    If so, you might try resetting your preferences:
    Reset Preferences
    http://forums.adobe.com/thread/375776
    1) Close the program and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (not reversible)
    or
    2) Move the Folder. See:
    http://www.bugge.com/Family-and-friends/Illy/illy.html

  • Sync with Outlook 2010 does not work

    While it seems to work, showing the normal progess bar in iTunes - taking some time and feels like normal, no data is transferred from or to outlook.
    No difference with Outlook x32 and x64, iTunes is 10.2.2 x64.
    Reinstalled office and iTunes several times, making empty outlook.pst etc. but still i can't get data from the phone to outlook.
    Any ideas would be aprreciated.

    RIM has formally announced that support for Outlook 2010 will be available this month.  I've heard rumors of August 10th but that's not official.  Regardless, a new Desktop Manager will be released very shortly to add support for Outlook 2010 and some other great features.
    1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
    2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

  • Design Standard does not appear in the options

    I have downloaded the application manager from the Design Standard downloads on the website, but when it installs and runs, Design Standard is not in the applications available. Only Premium, Master and the individual applications. Where is and how do I download and install the Design Standard suite?

    I'm having the same problem.  What you suggest does not work.  I've done it exactly like this and no download. 
    Design CS6 standard is not an option.  And initiating from the web page: http://www.adobe.com/cfusion/tdrc/index.cfm?product=design_standard does not cause download to happen autopmatically.  Please provide a real solution.
    I'm on new macbook pro using safari.

Maybe you are looking for

  • Not able to get group name by using memberof class, getting Total groups as 0 even I am member of that group.

    Not able to get group name by using memberof class, getting Total groups as 0 even I am member of that group. Through this memberof class I am trying to find full qualified name(DN) of my group. code I have used: //specify the LDAP search filter     

  • "Access is Denied" when trying to RDP to Server 2012

    When attempted to RDP to a Windows Server 2k12, occasionally I will receive a "Access is Denied" error after entering credentials. Direct console access works fine. Attempted to RDP to 2k12 server with Win XP, Win7x64 Pro, Win 8.1, WinServer2k3 and W

  • Mac OS X v.10.5.8:Permissions which were not repaired with Disk Utility App.

    I have a desktop Power Mac G5 w/dual processor 2.5 Ghz, 4GB DDR SDRAM and 2 Hard Drives. After I created a new admin password and deleted the old one, there were several problems with the Safari 5.0.6, the Mail apps. and the Cisco Wireless router whi

  • CR2 files corrupt or unsupported

    Hey there! I am hoping someone out here can help me! I just received the CF cards from my second shooter at a wedding yesterday. They were shooting with a 5D MK II, which uses CF cards. They were shooting RAW, so the file format is CR2. I am trying t

  • Ipod freeze, dont charge, etc

    hello, mi ipod doesnt charge, the screen is freeze with not light, when i plus into a stereo the ipod plays her music but the light is still not on. When the screen is freeze, nothing of the buttons can not. The only button that is normal and appear