OUTLOOK 2010. Does not reply to emails using the same address that received it.

Hello,
Since last week our Outlook accounts are not working properly, when users reply a message it does not reply using the same address that received it, it appears the personal account instead.
We are using exchange accounts, using Outlook 2010  and the accounts affected are automapped to a principal account (.ost).
We already tried to recreate outlook .ost profile, repair Outlook installation, reinstall Office.
Can somebody help?
Thanks in advance.

Hi,
We have received many reports as your description since last week. It sounds like the sending behavior in Outlook 2010 has been changed by some Windows/Office update and goes back to the behavior before.
Before we go any further, I have to mention some of the history for Outlook 2010. In Outlook 2010 without SP1, Mailto’s will use the default/principal account for message when you use Microsoft Outlook 2010 which has multiple accounts delivered to different
data file. However, in later version (Outlook 2010 SP1/SP2), Outlook doesn’t use the default account set in Account settings for new messages. Instead, it uses the account associated with the mailbox or *.pst file you have in focus.
Actually, this behavior is controlled by the registry keys. At this point, I suggest we check the following registry entries are exist and set it to the proper value.
HKEY_CURRENT_USER\Software\Microsoft\Office\14.0\Outlook\Options\Mail
DWORD value: NewItemsUseDefaultSendingAccount
Value type: REG_DWORD: 1 for force, 0 to disable.
HKEY_CURRENT_USER\Software\Policies\Microsoft\Office\14.0\outlook\options
Value Name: ForceAccountSelection
Value type: REG_DWORD: 1 for force, 0 to disable.
Close the registry editor and restart Outlook to check if the behavior what you want would come back.
In addition, our Outlook MVP, Diane Poremsky has written an article with more detail information:
http://www.slipstick.com/outlook/outlook-2010/multiple-accounts-and-the-default-account/
By the way, we still cannot figure out which update is the root of the issue, if someone could test it and share the result here, I would appreciate that. Feel free to post back.
Tony Chen
TechNet Community Support

Similar Messages

  • I have an iPod and an Ipad and want to use FaceTime calling from the iPod to the Ipad but it does not work. I use the same iCloud acount.

    I have an iPod and an Ipad and want to use FaceTime calling from the iPod to the Ipad but it does not work. I use the same iCloud accountedge

    Did you set up different email addresses for each device?
    iOS: Using FaceTime
    The Complete Guide to FaceTime: Set-up, Use, and Troubleshooting Problems

  • HT4623 i can no longer access Safari.  It's not the phone because Apple just sent a new one and it still does not work.  I use the same computer to sync my ipodtouch5 and it has Safari.  My iphone4 does not.  What is the problem?

    I can no longer access Safari.  It's not the phone because Apple just sent a new one and it  (Safari) still does not work.  I use the same computer to sync my ipodtouch5 and Safari is operable.   However, Safari on my iphone is not.  What is the problem?

    That is the way it works. It designed to do that.
    In addition to everything else you have to this other person's computer you would have to move your complete iTunes library over also. Only then will it recognize youriTouch.
    Allan

  • Firefox previously worked fine but after installing new version does not open. Opens in the same day that I install it but not after restarting computer.

    I just installed the new version of firefox. My firefox worked fine with the previous version. But the new version only works on the day I install it but the next time i start my computer it does not work. It does not open after clicking the icon. I even uninstalled it and then reinstalled it but again the same thing happened. I have no idea about plug ins etc. but I did not install any new ones.

    This is a very interesting issue. Let's start with trying [[safe mode]], [[managing profiles|new profile]], and [http://firefox.com/all-older.html installing an older version] - if one of these works, please don't do the rest and reply here.

  • Outlook 2010 does not receive rss messages

    Hi,I have recently uninstalled a freeware VPN.
    After that outlook 2010 does not receive messages (bizarrely firefox works fine, but internet explorer does not)!
    I keep receiving error code: 0x800c0008
    I made sure that it is properly uninstalled.
    Thank you for your help!

    Hi,
    Have you subscribed any RSS Feeds before? Please go to File > Info > Account settings > "RSS Feeds" Tab and check if all the feeds are healthy (connection successful?). Remove them to check
    whether you would still receive the error code anymore.
    More information:  http://office.microsoft.com/en-001/outlook-help/unsubscribe-from-an-rss-feed-HA010024271.aspx
    The following KB could help you solve your issue.
    Troubleshooting error messages that you receive when you try to send and receive e-mail in Outlook and Outlook Express
    http://support.microsoft.com/kb/813514
    In addition, I would like to suggest you ask this in the Outlook Forums:
    http://social.technet.microsoft.com/Forums/en/outlook/threads
    Hope it helps.
    Regards,
    Blair Deng
    Blair Deng
    TechNet Community Support

  • I am using Quickbooks Pro with my macbook pro. It does not allow me to use the @ symbol when I am inputting an email address into the client information section. What do I do?

    I am using Quickbooks Pro with my macbook pro. It does not allow me to use the @ symbol when I am inputting an email address into the client information section. What do I do?

    stefani88 wrote: It seems from other discussions my current OS on my laptop is the reason why it won't sync but people running older versions of windows aren't having a problem. So I don't get it.
    Oh. Gosh.  What's Windows got to do with anything? You're on Leopard, on a Mac.
    It seems from other discussions my current OS on my laptop is the reason why it won't sync

  • For one Urgent Change during performing the Approval(chnging the status to 'To be Tested') system does not recognize any changes using the CTS WBS BOM in the development system. The transaction is therefore incorrect or the status was reset by the system.

    For one Urgent Change while performing the one of the Approval before changing the status to 'To Be Tested'
    We are getting below error.
    The system does not recognize any changes using the CTS WBS BOM in the development system. The transaction is therefore incorrect or the status was reset by the system.
    COuld anyone please help us to know, How it can be resolved?
    We also have this below error.
    System Response
    If the PPF action is a condition check, the condition is initially considered as not met, and leads to another warning, an error message, or status reset, depending on the configuration.
    If the PPF action is the execution of a task in the task list, and the exception is critical, there is another error message in the document.
    Procedure
    The condition cannot be met until the cause is removed. Analyze all messages in the transaction application log.
    Procedure for System Administration
    Analyze any other messages in the task list application log, and the entries for the object /TMWFLOW/CMSCV
    Additional Information:
    System cancel RFC destination SM_UK4CLNT005_TRUSTED, Call TR_READ_COMM:
    No authorization to log on as a trusted system (Tr usted RC=0).
    /TMWFLOW/TU_GET_REQUEST_REMOTE:E:/TMWFLOW/TRACK_N:107
    For above error Table /TMWFLOW/REP_DATA_FLOWwas refreshed as well but still the same error.

    If you are in Test System, you can use function module AA_AFABER_DELETE to totally delete the depreciation area (tcode SE37, specify chart of depreciation and depreciation area), After that recreate your depreciation area and run AFBN. But before you do that, have you created a retirement transaction type that limits the posting on your new depreciation area? If not create one.
    Hope this helps.
    Thanks!
    Jhero

  • When I try to access my Bank's website from the Bookmarks Toolbar the page does not load.Yet using the same address in Internet Explorer it loads fine.Any ideas

    My Bank's address is :- http://www.santander.co.uk/csgs/Satellite?appID=abbey.internet.Abbeycom&canal=CABBEYCOM&cid=1237889419188&empr=Abbeycom&leng=en_GB&pagename=Abbeycom/Page/WC_ACOM_Home.
    All I get is a rotating green circle & the message "waiting for "service.maxymiser.net"".
    Yet when I use the same address in IE it launches ok'
    My O/S is Windows 7 Home Premium Sevice Pack 1 (x64 based}

    I can access the Bank's site from the link in your post above.
    Try clearing cache and cookies. Also consider what settings you have on any privacy or ad-blocking software. Blocking ad's may speed things up or it may conceivably block access.
    If you have problems with only one site and only in Firefox, the problem is often outdated or corrupt files relating to that web page. I suggest you try the following.
    *Note <br /> It '''looks''' complicated but check the site after each numbered step, the first or 2nd step may solve the problem<br /> The linked articles have '''pictures''' ( screen shots) of the actions you need.
    # Try using the sites home page or a direct link and not a bookmark.<br /> Try link http://www.santander.co.uk
    # Reload website using an extra step to use avoid using the cached info.
    #* Hold down the Shift key and left-click the Reload button <br />OR Press '"Ctrl + F5"' |(Mac ) "Cmd + Shift + R"
    #Clear the cache, and cookies only from problem websites.
    ##<u>Remove the cookies </u>for a single problem website <br />Use: FirefoxButton / Tools → Options → |Privacy| → "Remove individual cookies"<br /> See: [[Delete cookies to remove the information websites have stored on your computer#w_delete-cookies-for-a-single-site]]'''_delete-cookies-for-a-single-site'''
    ## <u>Clear the cache</u> <br />Use ''FirefoxButton / Tools → Options → |Advanced | → Network >'' <br /> See: [[How to clear the Firefox cache#w_clear-the-cache]]_clear-the-cache
    # If the above did not work try in Firefox'[http://kb.mozillazine.org/Safe_Mode s] Safe Mode to check if an extension or some other factor causes the issue. <br /> Use: FirefoxButton /Tools → Help → ''Restart with Addons disabled... ''. <br />See: [[Troubleshoot Firefox issues using Safe Mode]] <br />also see [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]

  • When I open a link in gmail the website opens as a completely black page and when I click anywhere in the page the whole thing turns white and there is nothing showing. This does not happen when I open the same link in IE

    When I click on a link in gmail it will open the website as a black page. When I click anywhere on the page it turns completely white with nothing there. This does not happen when I open the same link in IE
    == URL of affected sites ==
    http://all

    Do you have that problem when running in the Firefox SafeMode?<br/> ''A troubleshooting mode.''<br />
    1.You can open the Firefox 4.0 SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut. <br />
    2. Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. <br />
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut to open it again.''
    If not, see this: <br />
    http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes

  • When I try and play music on my iPhone downloaded from iTunes it says 'this URL is not found on this server'. This does not happen when I play the same music through my iPad. Can anyone help?

    When I try to play music downloaded from itunes on my iPhone 4S it says 'this URL is not found on the server'. This does not happen when I play the same music on my iPad. The music plays fine. The message also comes up when I try and login to iTunes on my iMac. Can anyone help?

    I too am having the same issue as the OP.
    Your USER AGENT information is Mozilla/5.0 (Macintosh; Intel Mac OS X 10_10_2) AppleWebKit/600.3.18 (KHTML, like Gecko) Version/8.0.3 Safari/600.3.18
    Every webserver that receives a request from your browser is able to determine the HTTP USER AGENT information unless it has been removed by some software (e.g. firewall) before the request was trasmitted.

  • Is there a way to reset my iphone i did the latest update on it and now it will not let me download any apps. I tried the general reset but it keeps denieing me saying that my passcode is not correct. This is the same passcode that i use to unlock

    Is there any way to reset my iphone i did the latest update and now i cant download any new apps? I tried to do the general reset but it keeps telling me that my passcode is not correct. This is the same passcode that I use to unlock my phine though to get in to it.

    press and hold both the power and home buttons until the apple logo appears and then let them go.  Wait till the phone restarts and then try

  • I have an apple id but i have not been able to use the same id with i tune and app store..what to do

    i have an apple id but i have not been able to use the same id with i tune and app store..what to do???every time i m trying to login it is telling that this id has not been used with i tune and App Store ....reviewing of my id is one of the option provided to me after this...

    Have you logged in and reviewed your account and entered payment details ? Unless the instructions on this page are followed when creating an account : Create an iTunes Store, App Store, or iBooks Store account without a credit card or other payment method - Apple Suppor…
    then credit card details will need to be entered before the account can be used to download any item from the store.
    You could see if this post by mountaingoatgirl lets you review your account without needing to enter credit card details : https://discussions.apple.com/message/24303054#24303054
    If not then you will either have to enter card details (you should be able to remove them after entering them), or create a new account (using the instructions on the above link).

  • Can I use the same plan that I have for my iphone 4s with my new ipad? or do I have to buy a new data plan for my new ipad?  I would love to use my new ipad away from home but not sure how to use it?

    Can I use the same plan that I have for my iphone 4s with my new ipad? or do I have to buy a new data plan for my new ipad?  I would love to use my new ipad away from home but not sure how to use it?  I am on Telus mobility with my iphone 4s.

    See the answer on the same question you asked a few minutes ago.

  • How to create a file which i can attach to an email using the same print routine i use for printing

    Hi all,
    In my current code i print a document.
    What I would like to do is attach this file - possibly as a pdf - to an email using the same print routine ( with some additional code obviously)
    Did some research on the web and can't find a solution to this.
    Any help would be appreciated.
    Regards
    Jan Konijnenberg

    What I would like to do is attach this file - possibly as a pdf - to an email using the same print routine ( with some additional code obviously)
    You need to install a printer that 'prints' to a PDF file.  Then send your document to that printer and attach the file.  There are several available, free and commercial.
    http://www.dopdf.com/
    There are other formats which may be suitable.
    http://www.howtogeek.com/150891/how-to-print-to-pdf-in-windows-4-tips-and-tricks/

  • When you turn on the ipad2 it does not start up properly.  The rotating disk that happens when you turn off the ipad appears after the apple logo comes up

    When you turn on the ipad2 it does not start up properly.  The rotating disk that happens when you turn off the ipad appears after the apple logo comes up during start-up and stays there for ten minutes.  Then, the ipad will start up properly.

    Have you tried a reset ? Press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

Maybe you are looking for