Outlook 2010 E mail configure error

Hello All,
I have some issues related outlook e mail client configured,
At my office,When i added User Company E-mail to outlook 2010 by i put the following:
-User Name
-User E-mail Account
-User Password
After that, I Followed the instruction,I got few screen error as the captured below:
Please help me with this.

Hi,
To narrow down the cause, I'd like to recommend the following troubleshooting:
1. Use another Outlook client to configure your account.
2. Check the result if you directly access the following URL:
https://autodiscover.domain.com/autodiscover/autodiscover.xml
Thanks,
Angela Shi
TechNet Community Support

Similar Messages

  • Windows 7 x64, Outlook 2010 and iCloud configuration - error "Outlook configuration problem"

    I'm running Windows 7 x64
    I had iCloud 1.x working with Outlook 2007 x32.  A few months back I upgraded to Office 2010 x64, which (of course) broke the iCloud integration.  I've waited for the "fix", and have now tried to get it working again with iCloud 2.11.   I've tried repairing, I've uninstalled/reinstalled iCloud, I've set different default profiles, I've changed mail accounts...nada. 
    No matter what I do, when I get to the point of opening up the iCloud configuration and try to set up Mail, Contacts, Calendars, etc.  I immediately get the following error:
    "Outlook configuration problem.
    Setup can't continue because Outlook isn't configured to have a default profile.  Check your Outlook settings and try again."
    Any suggestions?

    Hi,
    Regarding the issue here, Please first take an attempt to repair your Outlook personal folder file (.pst) :
    How to repair your Outlook personal folder file (.pst)
    We might also take a try to reinstall the Windows Search feature:
    If your installation of Windows Search got damaged, we can remove and reinstall it in the following way.
    Control Panel-> Programs-> Turn Windows features on or off
    Deselect: Windows Search
    Press OK and wait until the installer is finished.
    Reboot your computer.
    Repeat the above steps to enable it again.
    If still have troubles with outlook search, we may need to take a look in the Event Viewer and look for any errors logged by the “Search” or “Microsoft Outlook”, And if they are not helpful to you, please post them back in together
    and we will help you troubleshoot it.
    In addition, we might consider seek help in the forum below regarding outlook issues:
    Outlook IT pro discussions
    http://social.technet.microsoft.com/Forums/office/en-US/home?forum=outlook
    Hope this may help
    Best regards
    Michael Shao
    TechNet Community Support

  • Can't sync 8330 to Outlook 2010. Keep getting error message.

    I just got outlook 2010 and am trying to set up my 8330 to sync with it. I cannot sync the address book and the calendar because I keep getting  an intellisync error message that says "One or more configured folders is not available. Update folder mapping and try again." When I click on Configure settings>advanced> with the check box in Calender clicked I get a message that says "No available message stores." I click OK and then the advanced settings pop up. When I click on Map Field I get an error message. "Error encountered. Error code - 0x82bc1095. Check documentation."
    I have been trying for several hours to figure this out. The only way I can get it to sync is when I change the MultiJobTraceLog value to 200 and the TifLog Value to 100 in the iloptcfg file as instructed in one of the RIM help documents. And even then it only works the first time I sync after starting BB desktop software 6.0 and plugging in my phone.
    Help!!

    Hi there!
    Let's start with your Outlook 2010 version...if 64bit, then this KB will apply:
    KB17149Support for Microsoft Outlook 2010 64-bit version
    Otherwise, this KB might apply:
    KB15564"No available message stores" appears when configuring synchronization settings in BlackBerry Desktop Manager
    Good luck and let us know!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Outlook 2010 - sending mail with attachment - "The system cannot find the file specified"

    Hi forum Fellows,
    I have the following failure scenario:
    1. A user receives an e-mail with an attachment.
    2. The user opens the attachment --> Forwards the mail and writes something in the body of the e-mail
    3. For whatever reason the user leaves the e-mail and works on something else --> the user comes back to the e-mail an hour or more later.
    4. The user then wants to send the e-mail but gets the following error message: "The system cannot find the file specified"
    5. The effect is that the user cannot send the e-mail.....
    ------------------------------ TROUBLESHOOTING -----------------------
    - I can see that when the user opens an attachment this attachment is saved in the OutlookTemp folder. Actually, there is a difference between opening the attachment before or after clicking forward on the e-mail.
    ---- Before: Two files is written to the OutlookTemp folder. For example if the attachment name is FileX.pdf - there will be a FileX.pdf but also a FileX (2).pdf in the folder (if OutlookTemp is empty/do not contain a file with the name FileX.pdf already)
    ---- After: Only one file is written to OutlookTemp. That is FileX.pdf
    - Running Process Monitor when trying to forward the e-mail I can see that Outlook is calling a file that is not in the OutlookTemp folder anymore.
    **** To me this is the heart of the issue. For some reason, when a user has an e-mail with an attachment open for an extended period of time (not sure on exactly how long is necessary), files in the OutlookTemp folder is deleted - files that Outlook is depending
    on to be there.
    - Going with a totally clean OutlookTemp folder does not help.
    ------------------ NOW WHAT ---------------
    - The question now is: Is this by design? Can it be fixed by some Outlook 2010 patch? Or perhaps a group policy/registry setting as a workaround.
    ------------------------------ TECH. INFO -----------------------
    Outlook 2010 v14.0.7132.5000
    Outlook bit depth: x86
    Running on a 2008R2 SP1 TS environment.
    No antivirus on the TS
    Looking forward to hear from you.
    Regards The Red Baron
    Red Baron

    Hello Red Baron,
    Although not a complete answer, the way to treat attachments in emails require some discipline:
    1. Never open an attachment directly from the email (and NEVER edit it from there). Always save it in a known location as the desktop or (better) in a designated document folder. Then you can proceed as usual, like editing the contents, printing, forwarding
    the new version etc.
    2. Directly forwarding the attachment is ok, along with additional text in the body of the email.
    3. Having any (unsaved) document open for several hours should
    never occur. What if there is a power outage?
    Bottom line is thus Discipline. This is regardless of Operating System (which might handle temporary files differently).
    These are the rules I teach my customers and they never leave any document unsaved for hours ...
    Best regards George

  • Outlook 2010 "Server is unavailable" error when starting remote app

    All,
    I have recently built and configured a new server to run Remote Desktop Services.  It in on Server 2008 R2 Standard 64-bit.
    I have published numerous applications (e.g. Adobe, Visio, Project, etc. as well as Office 2010) to the host server.  Everything works with the exception of Outlook 2010 (client of an Exchange 2010 server).  When I or any of my users try to bring
    it up in the RDS portal, it goes through the normal start-up of any Outlook first use and looks for an existing email account.  As it is trying to load the user profile, an error pops up saying "The server is unavailable."  Clicking "Retry" does
    not work at all.
    When I run Outlook directly from the RDS host server itself, it loads up and runs fine so I know the RDS server can contact the Exchange server.
    Any ideas on why the Outlook application works on the host server but will not work when trying to run it through the RDS Web Access portal?
    Thanks.
    IT Manager, Alpha Corporation Dulles, VA

    You're probably running into this issue:
    http://support.microsoft.com/kb/2596960
    There are a couple of patches that you need to install and then a registry key that you have to add.
    Don Geddes - SR Support Escalation Engineer - Remote Desktop Services - Printing and Imaging

  • Lync and Outlook 2010 appcrash UCMapi64.exe error

    Hi All,
    I have 4 end-users who are experiencing the same appcrash errors.  When they open Lync and Outlook they first receive "Microsoft Lync 2010 has stopped working".  The details for this are:
    Problem Event Name: APPCRASH
    Application Name: UcMapi64.exe
    Application Timestamp: 5243366c
    Fault Module Name: MSVCR90.dll
    The second error generates in outlook stating "Microsoft Lync 2010 exited without properly closing your Outlook data file C:\Users\firstname.lastname\appdata\local\microsoft\outlook\[email protected]".  Microsoft outlook must
    be restarted." 
    Name and domain are omitted for confidentiality.  We've tried to restart outlook and lync and it still comes up with the same 2 errors.  Should we attempt to remove their outlook profile from Mail? Or try reinstalling Lync 2010?

    Oligaf,
    We too have began to see this happen in the past few days with multiple individual across multiple divisions within our infrastructure. Myself and a colleague of mine believe that the issue is related to a specific update. Which one, not yet sure. We have
    split up the task to try and burn the candles at both ends. He is doing a restoration on a machine to a date before the issue occurred, and going to systematically work in the updates one at a time to find the faulted update (if there is one). We believe this
    is the culprit.  We have uninstalled, re installed, systematic Lync updates, re-registering DLL files, wiping dead Reg Keys....   I will report back what we have found. If you will do the same, maybe together we can get this figured out. I also found
    this--https://social.technet.microsoft.com/Forums/lync/en-US/47223a0a-217d-407e-b4d7-3cbbe825a726/microsoft-lync-has-stopped-working-please-close-the-program?forum=ocsmanagement
    I have yet to give this a try...
    sorry for the lack of a hyperlink.. still waiting Technet account verification.
    Hopefully I will report back soon...
    DB

  • Oracle workflow notification mailer configuration error

    hi,
    i am trying to setup oracle wf notification mailer and trying to put a test email address so that all the emails go to that email address.
    but getting following message,
    FAILURE: javax.mail.SendFailedException: Sending failed; nested exception is: class javax.mail.MessagingException: 530 5.7.0 Must issue a STARTTLS command first. p5sm5221427pbd.12
    my env:
    Oracle R12 on Oracle Linux 5.5
    smtp server: smtp.gmail.com
    imap server: imap.gmail.com
    outgoing and incoming: SSL enabled
    my sendmail in Oracle linux 5.5 works fine and using that i am able to sent email address to outside world.
    please advice on the above error that i am getting in notificaiton mailer configuration screen.
    thanks,

    this is the latest log file for recreating the repos,
    Jun 14, 2011 10:47:51 AM oracle.sysman.emcp.ParamsManager setFlag
    CONFIG: Flag '-migrate' set to false
    Jun 14, 2011 10:47:51 AM oracle.sysman.emcp.ParamsManager setFlag
    CONFIG: Flag 'migrateFromDBControl' set to false
    Jun 14, 2011 10:47:51 AM oracle.sysman.emcp.ParamsManager setFlag
    CONFIG: Flag 'migrateToCentralAgent' set to false
    Jun 14, 2011 10:47:51 AM oracle.sysman.emcp.ParamsManager setFlag
    CONFIG: Flag 'migrateFromCentralAgent' set to false
    Jun 14, 2011 10:47:51 AM oracle.sysman.emcp.ParamsManager setFlag
    CONFIG: Flag 'migrateToDBControl' set to false
    Jun 14, 2011 10:47:51 AM oracle.sysman.emcp.ParamsManager setFlag
    CONFIG: Flag '-config' set to true
    Jun 14, 2011 10:47:51 AM oracle.sysman.emcp.ParamsManager setFlag
    CONFIG: Flag 'UPDATE_EMAIL' set to true
    Jun 14, 2011 10:47:51 AM oracle.sysman.emcp.ParamsManager setFlag
    CONFIG: Flag 'dbcontrol' set to true
    Jun 14, 2011 10:47:51 AM oracle.sysman.emcp.ParamsManager setFlag
    CONFIG: Flag 'db' set to true
    Jun 14, 2011 10:47:51 AM oracle.sysman.emcp.ParamsManager setFlag
    CONFIG: Flag 'create' set to true
    Jun 14, 2011 10:47:51 AM oracle.sysman.emcp.ParamsManager setFlag
    CONFIG: Flag 'drop' set to true
    Jun 14, 2011 10:47:51 AM oracle.sysman.emcp.ParamsManager setParam
    CONFIG: Setting param: ORACLE_HOME value: /u01/oracle/VIS/db/tech_st/11.1.0
    Jun 14, 2011 10:47:51 AM oracle.sysman.emcp.util.ClusterUtil isCRSInstalled
    CONFIG: isCRSInstalled: false
    Jun 14, 2011 10:47:51 AM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
    Jun 14, 2011 10:47:51 AM oracle.sysman.emcp.ParamsManager setParam
    CONFIG: Setting param: EM_HOME value: /u01/oracle/VIS/db/tech_st/11.1.0
    Jun 14, 2011 10:47:52 AM oracle.sysman.emcp.ParamsManager setParam
    CONFIG: Setting param: SID value: VIS
    Jun 14, 2011 10:47:52 AM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
    Jun 14, 2011 10:47:52 AM oracle.sysman.emcp.util.ClusterUtil isCRSInstalled
    CONFIG: isCRSInstalled: false
    Jun 14, 2011 10:47:52 AM oracle.sysman.emcp.util.ClusterUtil getLocalNode
    CONFIG: Cluster.isCluster: false. Skip call to getLocalNode
    Jun 14, 2011 10:47:52 AM oracle.sysman.emcp.util.ClusterUtil getLocalNode
    CONFIG: isLocalNodeDone: true localNode: null
    Jun 14, 2011 10:47:52 AM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
    Jun 14, 2011 10:47:53 AM oracle.sysman.emcp.util.DBControlUtil isDBConsoleConfigured
    CONFIG: Sid: VIS Host: localhost.localdomain Node: null OH: /u01/oracle/VIS/db/tech_st/11.1.0 isDBC: false
    Jun 14, 2011 10:47:53 AM oracle.sysman.emcp.util.CentralAgentUtil isCentralAgentConfigured
    CONFIG: Sid: VIS Host: localhost.localdomain Node: null OH: /u01/oracle/VIS/db/tech_st/11.1.0 agentHome: null isCentral: false
    Jun 14, 2011 10:47:53 AM oracle.sysman.emcp.util.CentralAgentUtil isCentralAgentConfigured
    CONFIG: Sid: VIS Host: localhost.localdomain Node: null OH: /u01/oracle/VIS/db/tech_st/11.1.0 agentHome: null isCentral: false
    Jun 14, 2011 10:47:53 AM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter SYS_PWD.
    Jun 14, 2011 10:47:53 AM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
    CONFIG: SQLEngine connecting with SID: VIS, oracleHome: /u01/oracle/VIS/db/tech_st/11.1.0, and user:
    Jun 14, 2011 10:47:56 AM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
    CONFIG: SQLEngine created successfully and connected
    Jun 14, 2011 10:47:56 AM oracle.sysman.emcp.ParamsManager setFlag
    CONFIG: Flag 'asm_db' set to false
    Jun 14, 2011 10:47:56 AM oracle.sysman.emcp.ParamsManager setFlag
    CONFIG: Flag 'asm_db' set to false
    Jun 14, 2011 10:48:02 AM oracle.sysman.emcp.ParamsManager setParam
    CONFIG: Setting param: PORT value: 1528
    Jun 14, 2011 10:48:04 AM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter SYS_PWD.
    Jun 14, 2011 10:48:04 AM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
    CONFIG: SQLEngine connecting with SID: VIS, oracleHome: /u01/oracle/VIS/db/tech_st/11.1.0, and user: SYS
    Jun 14, 2011 10:48:04 AM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
    CONFIG: SQLEngine created successfully and connected
    Jun 14, 2011 10:48:07 AM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
    CONFIG: SQLEngine connecting with SID: VIS, oracleHome: /u01/oracle/VIS/db/tech_st/11.1.0, and user: DBSNMP
    Jun 14, 2011 10:48:07 AM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
    CONFIG: SQLEngine created successfully and connected
    Jun 14, 2011 10:48:20 AM oracle.sysman.emcp.ParamsManager setParam
    Jun 14, 2011 10:48:25 AM oracle.sysman.emcp.ParamsManager setParam
    CONFIG: Setting param: MAIL_SERVER_NAME value: smtp.gmail.com
    Jun 14, 2011 10:48:25 AM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
    Jun 14, 2011 10:48:25 AM oracle.sysman.emcp.ParamsManager setParam
    CONFIG: Setting param: CONFIRMATION ANSWER value:
    Jun 14, 2011 10:48:28 AM oracle.sysman.emcp.ParamsManager setParam
    CONFIG: Setting param: CONFIRMATION ANSWER value: yes
    Jun 14, 2011 10:48:28 AM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter LOG_FILE.
    Jun 14, 2011 10:48:28 AM oracle.sysman.emcp.EMConfig addEMCALogFile
    CONFIG: ORACLE_BASE :/u01/oracle/VIS/db/tech_st/11.1.0
    Jun 14, 2011 10:48:28 AM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter DB_UNIQUE_NAME.
    Jun 14, 2011 10:48:28 AM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter DB_UNIQUE_NAME.
    Jun 14, 2011 10:48:28 AM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
    CONFIG: SQLEngine connecting with SID: VIS, oracleHome: /u01/oracle/VIS/db/tech_st/11.1.0, and user: SYS
    Jun 14, 2011 10:48:28 AM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
    CONFIG: SQLEngine created successfully and connected
    Jun 14, 2011 10:48:28 AM oracle.sysman.emcp.DatabaseChecks getDbUniqueName
    CONFIG: No Database unique name available. Will try to retrieve it from DB itself
    Jun 14, 2011 10:48:28 AM oracle.sysman.emcp.ParamsManager setParam
    CONFIG: Setting param: DB_UNIQUE_NAME value: VIS
    Jun 14, 2011 10:48:28 AM oracle.sysman.emcp.EMConfig perform
    INFO: This operation is being logged at /u01/oracle/VIS/db/tech_st/11.1.0/cfgtoollogs/emca/VIS/emca_2011_06_14_10_47_51.log.
    Jun 14, 2011 10:48:28 AM oracle.sysman.emcp.util.ClusterUtil isCRSInstalled
    CONFIG: isCRSInstalled: false
    Jun 14, 2011 10:48:28 AM oracle.sysman.emcp.ParamsManager setFlag
    CONFIG: Flag 'CHECK_CONFIG' set to true
    Jun 14, 2011 10:48:28 AM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
    CONFIG: SQLEngine connecting with SID: VIS, oracleHome: /u01/oracle/VIS/db/tech_st/11.1.0, and user: SYS
    Jun 14, 2011 10:48:28 AM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
    CONFIG: SQLEngine created successfully and connected
    Jun 14, 2011 10:48:28 AM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
    CONFIG: SQLEngine connecting with SID: VIS, oracleHome: /u01/oracle/VIS/db/tech_st/11.1.0, and user: DBSNMP
    Jun 14, 2011 10:48:28 AM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
    CONFIG: SQLEngine created successfully and connected
    Jun 14, 2011 10:48:28 AM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter MODIFY_SID.
    Jun 14, 2011 10:48:28 AM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
    CONFIG: SQLEngine connecting with SID: VIS, oracleHome: /u01/oracle/VIS/db/tech_st/11.1.0, and user: SYS
    Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
    CONFIG: SQLEngine created successfully and connected
    Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.ParamsManager setFlag
    CONFIG: Flag 'asm_db' set to false
    Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter MODIFY_SID.
    Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.DatabaseChecks getDbServiceName
    CONFIG: No service name available. Will try to set db_unique_name.db_domain
    Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
    CONFIG: SQLEngine connecting with SID: VIS, oracleHome: /u01/oracle/VIS/db/tech_st/11.1.0, and user: SYS
    Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
    CONFIG: SQLEngine created successfully and connected
    Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.ParamsManager setParam
    CONFIG: Setting param: DB_UNIQUE_NAME value:
    Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter DB_UNIQUE_NAME.
    Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.DatabaseChecks getDbUniqueName
    CONFIG: No Database unique name available. Will try to retrieve it from DB itself
    Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.ParamsManager setParam
    CONFIG: Setting param: DB_UNIQUE_NAME value: VIS
    Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter DB_DOMAIN.
    Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.DatabaseChecks getDbDomain
    CONFIG: No db domain available. Will query db for db_domain parameter
    Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.ParamsManager setParam
    CONFIG: Setting param: DB_UNIQUE_NAME value: VIS
    Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.ParamsManager setParam
    CONFIG: Setting param: SERVICE_NAME value: VIS
    Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter MODIFY_SID.
    Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter DBID.
    Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.DatabaseChecks getDbid
    CONFIG: No dbid available. Will query db to extract it.
    Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
    CONFIG: SQLEngine connecting with SID: VIS, oracleHome: /u01/oracle/VIS/db/tech_st/11.1.0, and user: SYS
    Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
    CONFIG: SQLEngine created successfully and connected
    Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.ParamsManager setParam
    CONFIG: Setting param: DBID value: 305783605
    Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
    Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
    Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.ParamsManager setFlag
    CONFIG: Flag 'db' set to true
    Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter MODIFY_SID.
    Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.DatabaseChecks getDbServiceName
    CONFIG: No service name available. Will try to set db_unique_name.db_domain
    Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
    CONFIG: SQLEngine connecting with SID: VIS, oracleHome: /u01/oracle/VIS/db/tech_st/11.1.0, and user: SYS
    Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
    CONFIG: SQLEngine created successfully and connected
    Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.ParamsManager setParam
    CONFIG: Setting param: DB_UNIQUE_NAME value:
    Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter DB_UNIQUE_NAME.
    Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.DatabaseChecks getDbUniqueName
    CONFIG: No Database unique name available. Will try to retrieve it from DB itself
    Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.ParamsManager setParam
    CONFIG: Setting param: DB_UNIQUE_NAME value: VIS
    Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter DB_DOMAIN.
    Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.DatabaseChecks getDbDomain
    CONFIG: No db domain available. Will query db for db_domain parameter
    Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.ParamsManager setParam
    CONFIG: Setting param: DB_UNIQUE_NAME value: VIS
    Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.ParamsManager setParam
    CONFIG: Setting param: SERVICE_NAME value: VIS
    Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
    CONFIG: SQLEngine connecting with SID: VIS, oracleHome: /u01/oracle/VIS/db/tech_st/11.1.0, and user: SYS
    Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
    CONFIG: SQLEngine created successfully and connected
    Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
    Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
    CONFIG: SQLEngine connecting with SID: VIS, oracleHome: /u01/oracle/VIS/db/tech_st/11.1.0, and user: SYS
    Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
    CONFIG: SQLEngine created successfully and connected
    Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.EMDBPreConfig invoke
    CONFIG: Passed repository configuration check
    Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter MODIFY_SID.
    Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter MODIFY_SID.
    Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter GLOBAL_DB_UNIQUE_NAME.
    Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.DatabaseChecks getGlobalDbUniqueName
    CONFIG: No Global database unique name available. Will try to retrieve it from DB itself
    Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
    CONFIG: SQLEngine connecting with SID: VIS, oracleHome: /u01/oracle/VIS/db/tech_st/11.1.0, and user: SYS
    Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
    CONFIG: SQLEngine created successfully and connected
    Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter DB_DOMAIN.
    Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.DatabaseChecks getDbDomain
    CONFIG: No db domain available. Will query db for db_domain parameter
    Jun 14, 2011 10:48:29 AM oracle.sysman.emcp.ParamsManager setParam
    CONFIG: Setting param: GLOBAL_DB_UNIQUE_NAME value: VIS
    Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.util.FileUtil _copyFile
    CONFIG: Copying file /u01/oracle/VIS/db/tech_st/11.1.0/sysman/config/emd.properties to /u01/oracle/VIS/db/tech_st/11.1.0/sysman/config/emd.properties.emca.tmp
    Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.util.FileUtil backupFile
    CONFIG: The original file /u01/oracle/VIS/db/tech_st/11.1.0/sysman/config/emd.properties has been copied to /u01/oracle/VIS/db/tech_st/11.1.0/sysman/config/emd.properties.emca.tmp
    Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.util.FileUtil _copyFile
    CONFIG: Copying file /u01/oracle/VIS/db/tech_st/11.1.0/sysman/config/emoms.properties to /u01/oracle/VIS/db/tech_st/11.1.0/sysman/config/emoms.properties.emca.tmp
    Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.util.FileUtil backupFile
    CONFIG: The original file /u01/oracle/VIS/db/tech_st/11.1.0/sysman/config/emoms.properties has been copied to /u01/oracle/VIS/db/tech_st/11.1.0/sysman/config/emoms.properties.emca.tmp
    Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.util.FileUtil _copyFile
    CONFIG: Copying file /u01/oracle/VIS/db/tech_st/11.1.0/sysman/emd/targets.xml to /u01/oracle/VIS/db/tech_st/11.1.0/sysman/emd/targets.xml.emca.tmp
    Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.util.FileUtil backupFile
    CONFIG: The original file /u01/oracle/VIS/db/tech_st/11.1.0/sysman/emd/targets.xml has been copied to /u01/oracle/VIS/db/tech_st/11.1.0/sysman/emd/targets.xml.emca.tmp
    Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
    Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.util.ClusterUtil getLocalNode
    CONFIG: isLocalNodeDone: true localNode: null
    Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.ParamsManager setFlag
    CONFIG: Flag 'IS_CENTRAL_AGENT_RECONFIG' set to false
    Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
    Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.util.ClusterUtil getLocalNode
    CONFIG: isLocalNodeDone: true localNode: null
    Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.util.CentralAgentUtil isCentralAgentConfigured
    CONFIG: Sid: VIS Host: localhost.localdomain Node: null OH: /u01/oracle/VIS/db/tech_st/11.1.0 agentHome: null isCentral: false
    Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.util.DBControlUtil isDBConsoleConfigured
    CONFIG: Sid: VIS Host: localhost.localdomain Node: null OH: /u01/oracle/VIS/db/tech_st/11.1.0 isDBC: false
    Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.ParamsManager setFlag
    CONFIG: Flag 'IS_CENTRAL_AGENT_CONFIGURED' set to false
    Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.ParamsManager setFlag
    CONFIG: Flag 'IS_DBCONTROL_CONFIGURED' set to false
    Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter DBCONTROL_HTTP_PORT.
    Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter AGENT_PORT.
    Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter RMI_PORT.
    Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter JMS_PORT.
    Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
    Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.util.ClusterUtil getLocalNode
    CONFIG: isLocalNodeDone: true localNode: null
    Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.util.DBControlUtil isDBConsoleConfigured
    CONFIG: Sid: VIS Host: localhost.localdomain Node: null OH: /u01/oracle/VIS/db/tech_st/11.1.0 isDBC: false
    Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
    Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter PORTS_FILE.
    Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.util.ClusterUtil getLocalNode
    CONFIG: isLocalNodeDone: true localNode: null
    Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter JMS_PORT_VIS.
    Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter JMS_PORT.
    Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter RMI_PORT_VIS.
    Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter RMI_PORT.
    Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter DBCONTROL_HTTP_PORT_VIS.
    Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter DBCONTROL_HTTP_PORT.
    Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter AGENT_PORT_VIS.
    Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter AGENT_PORT.
    Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.util.OUIInventoryUtil setOUILoc
    CONFIG: Setting oracle.installer.oui_loc to /u01/oracle/VIS/db/tech_st/11.1.0/oui
    Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.util.OUIInventoryUtil setOUILoc
    CONFIG: Setting oracle.installer.oui_loc to /u01/oracle/VIS/db/tech_st/11.1.0/oui
    Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.util.OUIInventoryUtil getAllOracleHomeLoc
    CONFIG: /etc/oraInst.loc and /u01/oracle/VIS/db/tech_st/11.1.0/oraInst.loc are not the same. Getting list of homes from /u01/oracle/VIS/db/tech_st/11.1.0/oraInst.loc
    Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.util.OUIInventoryUtil setOUILoc
    CONFIG: Setting oracle.installer.oui_loc to /u01/oracle/VIS/db/tech_st/11.1.0/oui
    Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.util.PortManager markAllUsedPorts
    CONFIG: Homes to scan for used ports: [u01/oracle/VIS/apps/tech_st/10.1.3, /u01/oracle/VIS/apps/tech_st/10.1.2, /u01/oracle/VIS/db/tech_st/11.1.0]
    Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.util.PortManager markAllUsedPorts
    CONFIG: Searching all DBConsole instances for used ports under ORACLE_HOME /u01/oracle/VIS/apps/tech_st/10.1.3
    Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.util.FileUtil getProperties
    CONFIG: Error reading file /u01/oracle/VIS/apps/tech_st/10.1.3/sysman/config/emd.properties
    Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.util.PortManager getAgentPort
    CONFIG: Cannot parse EMD_URL correctly. No port identified
    Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.util.PortManager markAllUsedPorts
    CONFIG: Marking Agent port: null from /u01/oracle/VIS/apps/tech_st/10.1.3/sysman/config/emd.properties
    Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.util.PortManager markAllUsedPorts
    CONFIG: Cannnot parse EMD_URL correctly. No port identified
    Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.util.PortManager markAllUsedPorts
    CONFIG: Searching all DBConsole instances for used ports under ORACLE_HOME /u01/oracle/VIS/apps/tech_st/10.1.2
    Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.util.PortManager markAllUsedPorts
    CONFIG: Marking Agent port: 1157 from /u01/oracle/VIS/apps/tech_st/10.1.2/sysman/config/emd.properties
    Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.util.PortManager markAllUsedPorts
    CONFIG: Searching all DBConsole instances for used ports under ORACLE_HOME /u01/oracle/VIS/db/tech_st/11.1.0
    Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.util.PortManager markAllUsedPorts
    CONFIG: Marking JMS port: null from /u01/oracle/VIS/db/tech_st/11.1.0/oc4j/j2ee/OC4J_DBConsole
    Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.util.PortManager markAllUsedPorts
    CONFIG: Marking RMI port: null from /u01/oracle/VIS/db/tech_st/11.1.0/oc4j/j2ee/OC4J_DBConsole
    Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.util.PortManager markAllUsedPorts
    CONFIG: Marking HTTP port: null from /u01/oracle/VIS/db/tech_st/11.1.0/oc4j/j2ee/OC4J_DBConsole
    Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.util.PortManager getAgentPort
    CONFIG: Cannot parse EMD_URL correctly. No port identified
    Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.util.PortManager markAllUsedPorts
    CONFIG: Marking Agent port: null from /u01/oracle/VIS/db/tech_st/11.1.0/sysman/config/emd.properties
    Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.util.PortManager markAllUsedPorts
    CONFIG: Cannnot parse EMD_URL correctly. No port identified
    Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.util.FileUtil getProperties
    CONFIG: Error reading file /u01/oracle/VIS/db/tech_st/11.1.0/install/staticports.ini
    Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.util.PortManager getFreePorts
    CONFIG: /u01/oracle/VIS/db/tech_st/11.1.0:localhost.localdomain:null:VIS:{}:null:{DBCONTROL_HTTP_PORT=1158, RMI_PORT=5520, JMS_PORT=5540, AGENT_PORT=3938}
    Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter AGENT_PORT_VIS.
    Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.ParamsManager setParam
    CONFIG: Setting param: AGENT_PORT_VIS value: 3938
    Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter DBCONTROL_HTTP_PORT_VIS.
    Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.ParamsManager setParam
    CONFIG: Setting param: DBCONTROL_HTTP_PORT_VIS value: 1158
    Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter JMS_PORT_VIS.
    Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.ParamsManager setParam
    CONFIG: Setting param: JMS_PORT_VIS value: 5540
    Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter RMI_PORT_VIS.
    Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.ParamsManager setParam
    CONFIG: Setting param: RMI_PORT_VIS value: 5520
    Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.EMDBPreConfig getFreePorts
    CONFIG: Ports assigned for SID: VIS : {DBCONTROL_HTTP_PORT=1158, RMI_PORT=5520, JMS_PORT=5540, AGENT_PORT=3938}
    Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
    Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.util.ClusterUtil getLocalNode
    CONFIG: isLocalNodeDone: true localNode: null
    Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.EMDBPreConfig copyAgentTimeStampFile
    CONFIG: File: /u01/oracle/VIS/db/tech_st/11.1.0/localhost.localdomain_VIS/sysman/emd/agntstmp.txt:localhost.localdomain does not exists.
    Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.ParamsManager getParam
    CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
    Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
    CONFIG: SQLEngine connecting with SID: VIS, oracleHome: /u01/oracle/VIS/db/tech_st/11.1.0, and user: SYS
    Jun 14, 2011 10:48:30 AM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
    CONFIG: SQLEngine created successfully and connected
    Jun 14, 2011 10:48:32 AM oracle.sysman.emcp.ParamsManager checkListenerStatusForDBControl
    CONFIG: ORA-12541: TNS:no listener
    oracle.sysman.assistants.util.sqlEngine.SQLFatalErrorException: ORA-12541: TNS:no listener
         at oracle.sysman.assistants.util.sqlEngine.SQLEngine.executeImpl(SQLEngine.java:1530)
         at oracle.sysman.assistants.util.sqlEngine.SQLEngine.executeSql(SQLEngine.java:1771)
         at oracle.sysman.emcp.ParamsManager.checkListenerStatusForDBControl(ParamsManager.java:2682)
         at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:193)
         at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:147)
         at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:222)
         at oracle.sysman.emcp.EMConfigAssistant.invokeEMCA(EMConfigAssistant.java:535)
         at oracle.sysman.emcp.EMConfigAssistant.performConfiguration(EMConfigAssistant.java:1215)
         at oracle.sysman.emcp.EMConfigAssistant.statusMain(EMConfigAssistant.java:519)
         at oracle.sysman.emcp.EMConfigAssistant.main(EMConfigAssistant.java:468)
    Jun 14, 2011 10:48:32 AM oracle.sysman.emcp.EMConfig perform
    SEVERE: Listener is not up. Start the Listener and run EM Configuration Assistant again .
    Refer to the log file at /u01/oracle/VIS/db/tech_st/11.1.0/cfgtoollogs/emca/VIS/emca_2011_06_14_10_47_51.log for more details.
    Jun 14, 2011 10:48:32 AM oracle.sysman.emcp.EMConfig perform
    CONFIG: Stack Trace:
    oracle.sysman.emcp.exception.EMConfigException: Listener is not up. Start the Listener and run EM Configuration Assistant again .
         at oracle.sysman.emcp.ParamsManager.checkListenerStatusForDBControl(ParamsManager.java:2689)
         at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:193)
         at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:147)
         at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:222)
         at oracle.sysman.emcp.EMConfigAssistant.invokeEMCA(EMConfigAssistant.java:535)
         at oracle.sysman.emcp.EMConfigAssistant.performConfiguration(EMConfigAssistant.java:1215)
         at oracle.sysman.emcp.EMConfigAssistant.statusMain(EMConfigAssistant.java:519)
         at oracle.sysman.emcp.EMConfigAssistant.main(EMConfigAssistant.java:468)

  • SMTP Mail Configuration error

    Dear Folks,
    after SMTP mail Configuration
    i can send mails to Internal mail id
    but i got dump to send External mail id
    Internal error: CL_SMTP_RESPONSE ESMTP error code is not known. 554 554 : Relay access d
    pls give me suggestion to resolve this issue
    regards
    satheesh

    Hi ,
       Please check the below note it will solve your issue::
    Note 693306 - Error analysis for e-mails and fax sent via Service Manager.
    Also as it says permision denied that means you have to check with your network team to check for proper access to cross firwall.
    Thanks..
    Mohit
    Edited by: mohit gupta on Oct 1, 2009 8:53 AM

  • Outlook 2010 and Mail Sticking in the Outbox

    This is a non-network question for Outlook 2010.  I am not using an Exchange server.  I am set up at home using Outlook 2010 on a home cable connection.  Every time I send an email it hangs in the Outbox.  There are no errors. 
    If I go to the Outbox and send it from there it sends without a problem.  I have tested the cable router and line with no problems.  Do you think it could be a problems with Outlook itself?  Please advise.
    Michael T. Glenn

    Hi,
    I suggest you disable the firewall and anti-virus program to try again, they are more likely to cause this kind of issue.
    Moreover, there are several steps that we can try to troubleshoot this issue.
    We can start Outlook in Safe Mode to determine if it's 3rd-party add-ins related:
    Press Win + R and type “outlook.exe /safe” in the blank box, then press Enter.
    If there’s no problem in Safe Mode, disable the suspicious add-ins to verify which add-ins caused this issue.
    Please also run Scanpst.exe to repair your Outlook Data File to check the result:
    http://support.microsoft.com/kb/272227/en-us
    We can also create a new profile to re-setup your email account:
    http://support.microsoft.com/kb/829918/en-us
    Regards,
    Melon Chen
    TechNet Community Support

  • Outlook 2010 e-mail signature missing from reply

    Hi!
    I have create a signature, and it works fine when creating new emails. But when replying/forwarding, there is no signature attached. And this despite I have attached the signature under options->mail->signatures->Replies/forwards.
    I have tried setting it to none, saving, adding it again and also with another very simple plain two word signature, with no result....
    I am running Office Professionel Plus 2010 on Windows 7 Enterprise 64bit
    I really hope that you have some suggestions, because this is really annoying!
    BR Rasmus Hovendal

    I had the same problem after upgrading to Outlook 2010, and this was the only place I got a search hit on (with Bing search of course) showing others with the same problem. I think I just found the solution (fixed it for me) so I
    thought I would share.  There seem to be multiple exchange accounts now (I don't remember if they were there before) in the Signature editing dialog, and each one of them has sig settings.  In the "Choose Default Signature: section, for the "Email
    Account:" drop down, select "Microsoft Exchange" and pick your sigs, select "Exchange" and select your sigs, and I guess select any others too :).
     I am assuming the problem is intermittent depending on who is autopopulated in the "from" section for the email that you are forwarding or replying to, "Exchange" or "Microsoft Exchange", although i don't know the logic of why one would be chosen over
    the other.

  • Outlook 2010 duplicates mail with setting Leave mail on sever, Delete After n days and pressing Send/Receive All folders

    The setting Leave mail on the server and Delete after n days and Pressing Send/Receive all folders causes outlook 2010 to duplicate all mails of the last n days over and over again.
    If I leave outlook 2010 open this problem does not occur, mail will be retreived without a problem. If I leave Outlook 2010 open for a long time and then press Send/Receive all folders it does work ok. If I restart Outlook 2010 and then press Send/Receive
    all folders the problem occurs.
    The pst file is a new one. OTher mail accounts that do have Leave mail on the server but not Remove after n days do not have the duplicating behaviour.
    I have manually removed 6400 duplicate mails, if Microsoft does not solve this urgent problem soon I need to remove Office 2010 from my computer and go back to Office 2007, Office 2007 worked fine for me.
    Is there a solution fir this problem, or a free tool to remove all duplicates?

    Dear Pieter,
    I suggest creating a new Outlook profile, and create the problematic account in the new profile, to see if the problem occurs.
    Here are the detailed steps on how to create a new profile to test this issue
    ==============
    1.    Exit
    Outlook.
    2.    Go to
    Start > Control Panel, click or double-click
    Mail.
    Mail appears in different Control Panel locations depending upon the version of the Microsoft Windows operating system, Control Panel view selected,
    and whether a 32- or 64-bit operating system or version of Outlook is installed.
    The easiest way to locate
    Mail is to open Control Panel in Windows, and then in the
    Search box at the top of window, type Mail. In
    Control Panel for Windows XP, type Mail in the
    Address box.
    Note    The Mail icon appears after Outlook starts for the first time.
    The title bar of the Mail Setup dialog box contains the name of the current profile. To select a different existing profile, click Show Profiles, select
    the profile name, and then click Properties.
    3.    Click
    Show Profiles. Choose Prompt for a profile to be used.
    4.    Click
    Add.
    5.    Type a name for the profile, and then click
    OK. Please also follow the onscreen instructions to create the email account in this profile.
    6.    Start
    Outlook, and choose this new profile.
    If this problem does not occur in the new Outlook profile, the old Outlook is corrupted. We can delete that and use a new Outlook profile.
    Please take your time to try the suggestions and let me know the results at your earliest convenience. If anything is unclear or if there is anything
    I can do for you, please feel free to let me know.
    Best Regards,
    Sally Tang

  • Cannot Add PST File to Outlook 2010. An Unknown error occurred, error code 0x80070002

    Computer is running Windows 7 64 Enterprise with Office 2010. 
    There was a PST file that was connected to the computer until we had a network outage yesterday. I deleted the entry for the PST file and went to add the PST file back and received the following message when I clicked the "add file" button.
    An Unknown error occurred, error code 0x80070002
    I have ran the Office repair, and recreated the users profile on the computer. 
    The users PST file connects to other computers without an issue. I would like to have to avoid having the wipe the computer and do a clean install. 
    Please let me know if you need more details. 

    The users PST file connects to other computers without an issue.
    Are you saying the same PST can be used on other computers without an issue? At what exact point do you get this error? In which dialog and which exact button click?
    Please try to create a new profile and let it build a new pst file. Later, you can redirect it to your existing PST file and see if it works.
    Regards,
    Ethan Hua
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.

  • Only Able To Add One File At A Time From Mapped SharePoint (2013) Drive to Outlook (2010) E-mail

    I am using SharePoint 2013. I have mapped several network drives. When adding files off SharePoint to an Outlook email, I can only add one file at a time. I can add multiple files IF they are not on SharePoint (e.g., stored locally, or on Dropbox); Previously,
    when using SharePoint 2010, I was able to upload multiple files. 
    ANy advice?
    Thanks. 

    Hi,
    There are two methods to add multiple files from SharePoint library to outlook emails:
    Sync SharePoint library to outlook via “Connect to Outlook”, then you will find SharePoint Lists in outlook. Locate the library folder, you could select multiple items and drag them to an email.
    Open SharePoint library via “Open with Explorer”, then you could selected multiple files and drag them to an email.
    Regards,
    Rebecca Tu
    TechNet Community Support

  • Outlook 2010 sent mail items are being deleted and found in recovered items

    My user has this issue with Sent Mail items not staying in the Sent items folder. Items are being sent to the sender. The mail messages are found in the recover items folder as if the deleted items folder was being emptied. This is not the case. No mail
    rules have been set to move items to the deleted items folder. User does not have the option of clearing the deleted items folder upon exit of outlook. This does not occur on every message. This at times happens immediately after sending the message. The option
    is selected in outlook to keep a copy of sent messages in the Sent Items folder. These are messages that are needed to be saved and have proof of them being sent to the end user.

    Hi,
    Is this issue reproduceable on OWA?
    Please make sure the user doesn't use the account on other devices, which may possibly cause this problem to occur.
    In case the hidden rules in Outlook caused the problem ,you can also try to use MFCMAPI to check and delete hidden rules from outlook:
    http://mfcmapi.codeplex.com/
    Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
    We can also try creating a new profile to set up the account, I've seem similar issues which were resolved by this:
    http://support.microsoft.com/kb/829918/en-us
    Regards,
    Melon Chen
    TechNet Community Support

  • Either there is no default mail client of the current mail client cannot fulfill the messaging request-----error Outlook 2010

    I've tried EVERYTHING suggested in this link (http://blog.timolthof.com/outlook-no-default-mail-client-error/) and everything google and bing and still this message keeps popping up.  Now when I do a windows search for email, I'm not able to view
    the email due to this message.
    For the record, I am running W7 Ultimate x64 and connected via Excange Server.  I do have another system that is running Office 2010 with none of these problems so I don't know if it's related to Exchange though the searches I've done don't allude
    to that.
    What's up?

    Hi,
    I understand that when you tried to open Outlook 2010 beta on the Windows 7 64-bit computer, you encountered the following error:
    "Either there is not default mail client of the current mail client cannot fulfill the messaging request. Please run Microsoft Outlook and
    set it as the default mail client."
    You have checked the settings under the registry subkey: HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Clients\Mail\Microsoft Outlook
    I understand the inconvenience you have encountered and appreciate the time and effort you spent on this issue. Please be assured that I
    will try my best to help you.
    Now let’s troubleshoot the issue by the suggestions below. Please check the results after each suggestion until the problem is resolved.
    Suggestion 1: manually set Outlook 2010 as the default e-mail client on Windows 7:
    ===================
    1.      
    Click Start.
    2.      
    Type "default programs" in the
    Search box.
    3.      
    Click Default Programs under
    Programs in the search results.
    4.      
    Now click Set your default programs.
    5.      
    Highlight Microsoft Outlook on the left.
    6.      
    Click Set this program as default.
    7.      
    Click OK.
    Suggestion 2: Start the Outlook program in safe mode
    ==============
    1.      
    Click Start, point to All Programs, and then point to
    Microsoft Office.
    2.      
     Press and hold the CTRL key, and then click the Outlook program you want to start.
    If the problem does not occur in the safe mode, this issue might be related to some third-party add-ins in the Outlook program, we can try
    to disable them. Normally, you could do the following to disable the conflict add-ins in your Outlook program:
    Disable add-ins
    Click
    File menu, click Options > 
    Add-in, click Go button in the Manage:
    Com-in Add.
    Check if there are any add-ins,
    clear the checkbox to disable them.
    Close the Office program and
    restart it.
    Add one check back each time to the list of Add-In,
    restart the Office program, and repeat the above procedure. Once the issue reappears again, we can determine which add-in causes this problem and then disable it.
    Suggestion 3: Test the issue with a new Windows user account
    ==============
    We can follow the steps in the articles to create a new user account to test the issue. If the problem does not occur in the new user account, some settings
    in the old account are corrupted. We can copy the main user files from the old account to the new account, delete the old account, and then continue using the new account.
    For the detailed steps on how to create a new user account and copy data from the old account to the new account, you can refer to the following articles:
    For Windows Vista/Windows 7:
    http://windows.microsoft.com/en-us/windows-vista/Create-a-user-account
    http://windows.microsoft.com/en-us/windows-vista/Fix-a-corrupted-user-profile
    Please take your time to try the suggestions and let me know the results at your earliest convenience. . If anything is unclear or if there
    is anything I can do for you, please feel free to let me know.
    Sally Tang

Maybe you are looking for

  • Mobility Group Table *MUST* be populated in each WLC in same mobility group

    For what it's worth, I recently discovered that when you have multiple controllers and want to implement Mobility Groups, more is needed than simply entering the same Default Mobility Group Name for each controller within the mobility group. The foll

  • Logical Database BRF

    For a report using logical database BRF where have to print invoice no with tax details and other line item details. First reading BSEG using GET BSEG. then GET BSET. now want to retreive material no &  quantity from table BSEG. how to write logic fo

  • Adobe Reader 9 and WES 7 SP1

    Hi- I'm working with Windows Embedded Standard 7 sp1 kiosk devices setup to print vendor badges. According to Microsoft only Adobe Acrobat Reader 9 is compatible with WES 7. Can I get some help in finding a legitimate download for adobe reader 9? I h

  • Bluej package problem

    Hi, can anyone help im trying to get a pakage to work in bluj compiler but keep getting the error package does not exist this is how the import statement is write the other query I have is do where do I put the package as the package I am using is fr

  • Acrobat not working

    I just downloaded Creative Suite 6 Design and Web Premium for Windows and the Adobe Acrobat component isn't working. It doesn't open by itself or to open a PDF. InDesign and Illustrator are working fine, so I'm not sure why Acrobat specifically isn't