Outlook 2010/Error sharing Calendar: Error while preparing to send sharing message

Everyone that is connected to this exchange is receiving an error when they attempt to share a calendar in outlook 2010. We are using Exchange 2010 and Outlook 2010. The error reads: Error while preparing to send sharing message.
Any ideas on a reason why this would be happening?

I think it may be caused by the following reasons.
1. Auto Discover service or outlook 2010 issue
To verify it ,you could try sharing calendar via OWA?
For how to manage Auto discover Service
http://technet.microsoft.com/en-au/library/aa995956.aspx
2.Mailbox corruption issue
For how to repair database
http://social.technet.microsoft.com/Forums/en-US/exchangesvrclients/thread/0ef36823-261f-40eb-a2e7-6dd0398d8d10/
3. Restrictive sharing permission assigned on the calendar.
Could you please verify if it is caused by your sharing policies? If the User chooses to change the permission
to the following: "Anyone can view and search for this Calendar on Office online.” You should be able to send
them without issues.

Similar Messages

Getting error while preparing to send sharing message

I have seen many people post up about this same error, however I am going to share some details in the troubleshooting I have performed.
Environment: Exchange 2013. Cloud hosted. Internet connectivity using any number of clients. Mostly OWA, but a few Outlook 2010 and Outlook 2013.
1. User A with Outlook 2010 or Outlook 2013 right clicks on the calendar and clicks "Share" -> "Share Calendar". They look up User B in the Global Address List and click "Send." An error window pop-up states "Error while
preparing to send sharing message." User A is able to click on Calendar Permissions and add User B to the correct permissions. User A with OWA is able to right click on the calendar and click "Share Calendar" and it will send the message, no
errors.
2. User B with Outlook 2010 or Outlook 2013 on the same computer that User A was trying to do this from right clicks on the calendar and clicks "Share" -> "Share Calendar". They look up User A in the Global Address List and click "Send".
No errors and the message goes through fine. It works correctly with OWA as well.
I have seen people put up "autodiscover" and "permissions" or other things. This is obviously not a permission issue because the same thing that can be accomplished in OWA can't be accomplished in Outlook. It isn't an autodiscover issue
because the same thing that one person can accomplish on a computer/Outlook, another cannot. This is the same error that I have seen since the time of Outlook 2007 and have yet to see a valid solution.
Thanks,
Don

Hi Don,
Hope it is the solution:
You can't share your calendar in Outlook 2007
http://support.microsoft.com/kb/2836889
Thanks
Mavis
Mavis Huang
TechNet Community Support

JMS Exception while trying to send a message on Login

I am getting the following exception while trying to send a JMS message after the login.
2012-06-01 12:09:30,688 ERROR [nucleusNamespace.com.tesco.events.manager.ILActivityManager] JMSException Occured
javax.jms.JMSException: A transaction-related exception occurred while trying to obtain a JMS Session from provider "Login": javax.transaction.RollbackException: [com.arjuna.ats.internal.jta.transaction.arjunacore.syncwhenaborted] [com.arjuna.ats.internal.jta.transaction.arjunacore.syncwhenaborted] Can't register synchronization because the transaction is in aborted state
     at atg.dms.patchbay.SessionManager.getSession(SessionManager.java:190)
     at atg.dms.patchbay.Provider.getQueueSession(Provider.java:632)
     at atg.dms.patchbay.OutputDestination.getPooledSession(OutputDestination.java:268)
     at atg.dms.patchbay.OutputPort.getPooledSession(OutputPort.java:156)
     at atg.dms.patchbay.ElementManager.createTextMessage(ElementManager.java:848)
     at atg.dms.patchbay.ElementManager.createTextMessage(ElementManager.java:546)
     at atg.dms.patchbay.ElementManager.createTextMessage(ElementManager.java:557)
     at com.tesco.events.manager.ILActivityManager.sendLogMessage(ILActivityManager.java:81)
     at com.tesco.events.manager.ILActivityManager.logActivity(ILActivityManager.java:69)
     at com.tesco.events.listener.ATGLogEventListenerImpl.logActivity(ATGLogEventListenerImpl.java:46)
     at com.tesco.events.source.ATGLogEventSource.logActivity(ATGLogEventSource.java:61)
     at com.tesco.ecom.userprofiling.ProfileFormHandler.postLoginUser(ProfileFormHandler.java:2022)
     at com.tesco.ecom.userprofiling.ProfileFormHandler.handleLogin(ProfileFormHandler.java:1191)
     at sun.reflect.GeneratedMethodAccessor1140.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at atg.droplet.EventSender.sendEvent(EventSender.java:582)
     at atg.droplet.FormTag.doSendEvents(FormTag.java:791)
     at atg.droplet.FormTag.sendEvents(FormTag.java:640)
     at atg.droplet.DropletEventServlet.sendEvents(DropletEventServlet.java:523)
     at atg.droplet.DropletEventServlet.service(DropletEventServlet.java:550)
     at atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:135)
     at com.tesco.ecom.userprofiling.AssignCookieServlet.service(AssignCookieServlet.java:139)
     at atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:135)
     at atg.servlet.sessionsaver.SessionSaverServlet.service(SessionSaverServlet.java:2442)
     at atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:135)
     at atg.commerce.order.CommerceCommandServlet.service(CommerceCommandServlet.java:128)
     at atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:135)
     at atg.commerce.promotion.PromotionServlet.service(PromotionServlet.java:191)
     at atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:135)
     at com.spindrift.sitebuilder.request.AuthServlet.service(AuthServlet.java:74)
     at atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:135)
     at com.tesco.ecom.userprofiling.LoginControlServlet.service(LoginControlServlet.java:61)
     at atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:135)
     at com.tesco.ecom.userprofiling.AccessControlServlet.processExpiredSession(AccessControlServlet.java:645)
     at com.tesco.ecom.userprofiling.AccessControlServlet.service(AccessControlServlet.java:392)
     at atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:135)
     at com.tesco.bns.droplets.AddingRecentlyViewedDroplet.service(AddingRecentlyViewedDroplet.java:235)
     at atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:135)
     at atg.userprofiling.PageEventTriggerPipelineServlet.service(PageEventTriggerPipelineServlet.java:169)
     at atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:135)
     at atg.userprofiling.SessionEventTrigger.service(SessionEventTrigger.java:477)
     at atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:135)
     at atg.search.servlet.SearchClickThroughServlet.service(SearchClickThroughServlet.java:396)
     at atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:135)
     at com.tesco.servlet.pipeline.LogOutputFilterServlet.logWithMdc(LogOutputFilterServlet.java:68)
Edited by: 915252 on Jun 4, 2012 2:39 AM

Hi,
you may be interested in a solution I tracked down at http://support.bea.com/application?namespace=askbea&origin=ask_bea.jsp&event=button.search_ask_bea&askbea_display=relevancy&askbea_max_number_returned=50&question=weblogic.jms.common.JMSException%3A+Connection+not+found&all_bea_products=all_bea_products&ES=ES#
Basically : you need to have your Weblogic servers, JMS servers and JMS stores
on each domain named uniquely !!!
"Joe Mooney" <[email protected]> wrote:
>
Any news on this one ?
"B Liu" <[email protected]> wrote:
Can u tell me how you supplied the required security credentials?
Thanks,
-Ben
"Andy" <[email protected]> wrote:
Hi.
I have a situation where I am sending an JMS message to external queue
on Weblogic
Server which is not part of cluster. This happens in a session bean,which
is wrapped
in a container transaction. I have supplied the required security credentials
like user, password etc.
I get an error while tryign to send the message through bean. The stack
trace
is :
weblogic.jms.common.JMSException: Connection not found
at weblogic.jms.dispatcher.InvocableManager.invocableFind(InvocableManager.java:136)
at weblogic.jms.dispatcher.Request.wrappedFiniteStateMachine(Request.java:596)
at weblogic.jms.dispatcher.DispatcherImpl.dispatchSync(DispatcherImpl.java:153)
at weblogic.jms.client.JMSConnection.createSessionInternal(JMSConnection.java:400)
at weblogic.jms.client.JMSConnection.createQueueSession(JMSConnection.java:347)
also one thing interesting is that if I call the same server and queue
outside
of the session bean,it works fine.
Any ideas what might be causing the issue?
Thanks
Andy

Talent Search-Trex- ESH_Cockpit-Error while preparing

Hello,
I am trying to configure TREX for talent search. But while trying to create the search object connector using ESH_Cockpit, I am getting the message 'Error while preparing' for all the connectors exept the connector HTRMC Person. These Connector is working. For an example here is the protocoll for indexing the connector HTRMC central person which is one who doesn't work:
29.07.2014 14:01:18 Step 001 gestartet (Programm ESH_SE_CONNECTOR_MOD_BGD, Variante &0000000000009, Benutzername RPCI280)
29.07.2014 14:01:19 Verarbeitungsschritt: Vorbereitung
Informationsmeldungen (1)
29.07.2014 14:01:19 Details zur Umgebung: TREX Version 7.10.58.00, Destination: TREX_DE1, SAP-Release 740
29.07.2014 14:01:19 Verarbeitungsschritt: Inaktive Konnektormetadaten Ã¤ndern
Fehlermeldungen (56)
29.07.2014 14:01:27 ZugehÃ¶rige Anforderungen fÃ¼r Objekttyp HRTMC_CENTRALPERSON, Knoten OBJID:
29.07.2014 14:01:27 Navigations-ID 4830F27A2F260115E10000000A421694 muss mit $NAV_ beginnen
Fehlermeldungen (1)
29.07.2014 14:01:27 Es ist eine Ausnahme aufgetreten
29.07.2014 14:01:27 Fehler beim Aktualisieren des Konnektors
29.07.2014 14:01:27 Job wurde nach System-Exception ERROR_MESSAGE abgebrochen
Thanks for help,
Jürgen

Hi Jürgen,
this is not much information. Which EHP you are using? EHP7 ?
please delete all Connectors and try to use backend report ESH_ADM_INDEX_ALL_SC..mark all checkboxes and select software component: EA-HRRXX
If this does not help you can get more information if you start fopr each connector the report with the correspnding variant as mentioned in the log. E.g.:
ESH_SE_CONNECTOR_MOD_BGD variant &0000000000009 ( pleease use alwys the last variant in the log.) This will gif you futher information.
best regards
Martin Hastik

TREX - Embedded Search - Error While Preparing

Hi,
I'm trying to activate the "Help Center: Link to File in Network Folder" in the connector administration cockpit (transaction ESH_COCKPIT).
The issue that I'm having is that when is trying to prepare the indexing it terminates with "Error While Preparing".
Job log:
14.06.2014 11:49:03 Job started
14.06.2014 11:49:03 Step 001 started (program ESH_SE_CONNECTOR_MOD_BGD, variant &0000000000009, user ID TREX_RFC)
14.06.2014 11:49:04 RFC destination has errors
14.06.2014 11:49:04 Job cancelled after system exception ERROR_MESSAGE
Screenshot:
I tested the RFC and is working fine.
I tried to find aditional information in the logs but I don't see anything more.
I have the TREX 7.1 Revision 58.
Please, I need to resolve this asap.
Any help is appreciated!!
Carlos

Hi Siriram,
Thanks for your reply!
1) Yes, is on and everything is in green.
2) The connection of the TRExadmin is working and it looks fine:
I fixed the error last night selecting the option below: "Reset user Settings for Running Application":
But now when I select the object connector "Help Center: Link to File in Network Folder" to schedule a indexing, the following error is presented:
14.06.2014 23:13:04 Job started
14.06.2014 23:13:04 Step 001 started (program ESH_IX_CRT_INDEX_OBJECT_TYPE, variant 7FB75954635D4D, user ID CJM)
14.06.2014 23:13:04 Start Indexing For:
14.06.2014 23:13:04 Object Type: HC_LINK_FILE
14.06.2014 23:13:04 Connection GUID: 0050569410FB1ED3BCF9E3BC3299F411
14.06.2014 23:13:04 Logical System: QASCLNT205
14.06.2014 23:13:08 Error passing parameters to FILE_GET_NAME_USING_PATH
14.06.2014 23:13:08 Help Center: Logical path for search does not exist or contains errors
14.06.2014 23:13:08 Job cancelled after system exception ERROR_MESSAGE
Where I have to put the path of my network folder?
Thanks for the help!!
Carlos

Error while checking in and storing:Message no. 26253 - CV02N

Hi Friends
I have received the following error Error while checking in and storing:Message no. 26253 while check in of file in Content Server.
I have done all seeting such as Creation of content repository, Storage category.
Content server is also installed properly as per installation guide.
Is note SAP Note 1327343 applicable for me.
With Regards
Mangesh Pande

Christoph Hopf
First thanks for the tip, my problem is that the Basis configured the server content in DMS because, will be used two servers.
I configured Data Carrier Sets / Sets date carrier type "server, front end".
Type (data carr.type) / Description / Path / CAD system / Online
80 / DMS Jundiai / Z_EMP_JD / 80 / X
I view an attached file in DMS normally, however when I make the check in Orig. the error occurs.
HTTP error: 500 (Internal Server Error) " ;ODBC State 00000; Error Code 26729080"
Message no. CMS025
Diagnosis
Error in accessing via HTTP
500 (Internal Server Error)
" ;ODBC State 00000; Error Code 26729080"
An error occurred when calling module SCMS_DOC_CREATE_FILES
Message no. 1R579
Diagnosis
Exception number 6 occurred when function module SCMS_DOC_CREATE_FILES was called with document 00155D0216091ED1BE84D6471C796DB4.
Since ja thanks for the help
Márcio

How to synchronize Outlook 2010 with SAP Calendar

Hello colleagues,
How to synchronize Outlook 2010 with SAP Calendar??
Thanks

Install MfE (Mail for Exchange), then follow this: http://www.google.com/support/mobile/bin/answer.py?hl=en&answer=147951
You can sync your mail, contacts and calendar with Google Sync. Tasks and notes are not supported. (Notes syncing is not possible with MfE anyway.)

I purchased a new Windows 8 PC. I have used and continue to use Outlook 2010 for my calendar. With my old Windows 7 PC and Outlook 2010, my calendar sinked properly with my Iphone 5. Now with the new Windows 8 PC, it does not. Help!

I purchased a new Windows 8 PC and I use Outlook 2010 for my calendar. With my old Windows 7 PC and Outlook 2010, my calendar would sync with my Iphone 5, but with the new Windows 8 PC and Outlook 2010, it does not, and I can't figure out how to snyc them. The emails from Outlook 2010 sync, but the calendar does not. Help! Thanks.

Easy solution for restoring lost calendar informaiton, thank goodness. On your iPhone, go to settings, then to iCloud. If your Calendar selection is turned off, turn it on. Your info should restore. If your Calendar selection is turned on, then turn it off. Choose to save calendars when asked. After it shuts the Calendar off, turn it back on. Your info should be restored.
Thank you to Apple support for walking me through this. Shame on you Apple for not just telling people about this easy fix rather than making us go through all of this pain and worry.
- JT

TS3999 I installed ic;oud on my iphone 4s and my pc laptop ruunning windows 7 and Outlook 2010, my new calendar information is not syncling? Thoughts?

I installed iCloud on my iPhone 4S and PC running Windows 7 and Outlook 2010. My calendar is not syncing when I put in new information. Solutions?

I would say that you would want to look into the "Exchange Mode" for GMail. That would allow your iPhone to sync calendars, contacts and email with GMail just fine. Doing the same with your outlook should also then sync those same with your PC using Outlook. I've done teh iPhone side of this, but I since I don't run Lookout for my email client, I'm not sure how that will work on the PC side.

KEU1 -Error while checking dependency of characteristics (Message KF438)

Creating an assessment cycle for transfering costs from cost centers to profitability segments and filling the receivers "Sales order Group" and "Sales order item" appears the message error KF438:
Error while checking dependency of characteristics
Message no. KF438
Diagnosis
Error with dependent characteristics: not all of the higher-level characteristics have been supplied with at least a single value.
Does someone know as this solves?
Greetings.

Hi Eduardo,
There is a validation for a dependent characteristic which cannot be checked.
Please check the long text of message KF439 and proceed accordingly.
If not please check note 580026, although the description seems not to fit
and execute KEU2 again.
I hope this helps.
Regards,
MLM

Outlook 2010 iCloud Add-In causes emails not to send

I just started using iCloud to migrate my Outlook 2010 contacts and calendar to iCloud and then to my iPhone 5s.
There's an intermittent problem (although I can now make it happen, so not so intermittent anymore) where my emails will not send unless I disable the iCloud Add-In. They appear as Drafts (not italicized in my Outbox) and will not send until I disable the iCloud Add-In, and go back into them and click 'Send' again.
Disabling my iCloud Add-In means that my Contacts and Calendar do not update to iCloud (and thus not to my phone either), so I have to be careful to remember to enable the iCloud Add-In immediately after getting my emails sent.
Does anyone have this problem and/or a fix for it?

Thanks all.
Was checking to see if the issue Samorren has discovered in the following post might have been in play for you:
iTunes 11.1.4.62 freezes while syncing with Outlook
(Similar issues can hit iTunes and the iCloud machinery, because they both use files from Apple Application Support ... hence the quick check of your situation over here.)

While trying to send a message to the receipient outside the domain...

While trying to send a message to the receipient outside the domain,the server
sends back the delivery error email message to the sender. this is OK. But for
some reason the the mail server keeps searching for the wrong recepient and
sending back the deleivery error email to the sender periodically. In this way,
it has sent around 450 such messages to my mailbox.
the mail delivery error looks like this :
451.. Name Server timeout while searching a.com in DN
Reporting -MTA;: dns; s-ghq-csc-ocsapp1.tawasul.mil.ae
Received -From-MTA:DNS;w-anh-sic-004.ANH.mil.ae
Final Recepient:RFC822; [email protected]
ACtion: Failed
Remote-MTA:DNS; a.com
Diagnostic-Code:SMTP;451... Name server timeout while searching a.com in DNS
Last-Attempt-Date:Tue, 18Feb 2003 08:34:38 =0000
solution ???

Hi,
This is apparently the week for integration questions!
There's no such product as "WebLogic MQ". I assume that what your trying to do is communicate with MQSeries or some other non-WebLogic vendor.
You cannot use a WebLogic client to communicate with MQ or vice-versa. You must create an MQ client using a MQ JMS connection factory in order to communicate with an MQ destination. Similarly, you must create a WL client using a WL connection factory in order to communicate with a WL destination. This advice applies to any JMS vendor, and is quite similar to the way JDBC drivers work.
Note that if you're communicating with MQ from a client rather than an application that's running on a WebLogic server, then there's often little purpose in using the "Foreign JMS" mapping facilities (in addition, these facilities may not work on the client for all foreign vendors -- I assume it depends on whether the foreign vendor connection factories and destinations are fully serializable/transferable between JVMs). Instead, you might want to consider using the standard JNDI and JMS APIs to communicate with MQ directly (eg, there's no need to involve WebLogic code in this case).
For information on integration, see the WebLogic doc for [ Integrating Remote JMS Providers | http://download.oracle.com/docs/cd/E12839_01/web.1111/e13727/interop.htm#JMSPG553 ] and, if the "MQ" your refering to in this case happens to be MQSeries, also see the blog post [Integrating WebSphere MQ 6 with BEA Weblogic Server 10|http://ibswings.blogspot.com/2008/02/integrating-mq-broker-6-with-bea.html].
Note that the majority of MQSeries integration customer apps that I've run across require "exactly-once" behavior, which means they must run on a WebLogic server (not a client) in order to participate in a WebLogic JTA transaction.
Hope this helps,
Tom

The attempted operation failed. An object could not be found. Outlook 2010 error

I am unable to search other mailbox in Outlook 2010, getting the following error: The attempted operation failed. An object could not be found. I removed both instances of
KB2956128
installed
on 2/11/2015. It worked for a while and issue returned againa. Any suggestions?

Hi,
Thank you for your reporting. We have noticed this, and would like to collect more information for further investigation.
Can you guys share your detailed system info? Also, if you have any log files about the issue, kindly share with us by sending them to this email account:
[email protected] (please use the link of this thread as the subject).
We appreciate your assistance with this.
Regards,
Melon Chen
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs. Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Outlook 2010 error 0x80070003 creating pst

Hi,
One of our users get an error 0x80070003 while trying to create a new pst in Outlook 2010.
The pst will by created locally, not on a networkdrive.
A new Outlook profile is already created.
Anybody an idea?

Hi,
Had the same problem at a client .What happened was that users my documents was mapped to their server.
Operating Systems tested on :
Windows 7 and 8 and 8.1
Outlook tested on 2013 and 2010
Issues had while testing .
1.My documents was mapped to public
Solution:
1.Open regedit and navigate to
HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders
Name: Personal
Type: REG_EXPAND_SZ
Data: %USERPROFILE%\"location on server"PS. Make backup of the file before you edit it Next create my doc if you don't have one or can't see.Now added the new location of the My docs to the Name: Personal
Type: REG_EXPAND_SZ
Data: %USERPROFILE%\"New Location on local workstation"Now re-setup the outlook account or open the pst .

OUTLOOK 2010 error "cannot sent this item"

Hai,
When i try to forwarding / replying via
Outlook 2010, i am getting an error "Cannot send this item" . The error occurred only when forwarding / replying a
particular MAILS.

We have the issue in our office from time to time, and after alot of test lately, here is what i came up with soo far
French:
Erreur HTML: Impossible d'envoyer cet élément.
Erreur Richtext: Impossible d'envoyer cet élément. La propriété n'existe pas. Le champ que vous voulez modifier n'est pas valide pour ce type d'élément
English:
HTML Error: Cannot send this item.
Richtext Error: The property does not exist. The field you want to modify is not valid for this type of item.
To reproduce the issue
Create a signature doing the following:
Open Word 2010, Type a word and hyperlink it to google
Insert a picture bellow, you can pick the default pictures in the pictures folder
Save the signature as .htm in your C:\Users\%user%\AppData\Roaming\Microsoft\Signatures folder
Create a new email and send it to yourself including your new signature and a file that isn't a .msg, lets pick a .docx file for now
From the email you've just received, transfer the email.
Insert your new signature again and resize one of your picture
While the new email is opened, the email must be saved at some point either by Outlook automaticly or manualy ctrl-s or clicking on the appropriate icon before sending the email
Send the new email, you'll get the error message after the dictionary lookup if the resize was made before saving the email, otherwise the send button won't click
Take note than if your windows resolution has bin changed to anything else than 100%, the picture will be automatically resize by inserting the signature
You must transfert the email, a reply won't create the issue
If we resize a picture and then we delete that picture before the error message, we don't have the issue
Possible solution to resolve the issue with this email:
- Close the email and get the last save in the draft
- Copy and past the body text, file etc in a new email
- Delete all the pictures in the email and send it, note that you cannot add any picture after that, otherwise you'll still have the issue

Outlook 2010/Error sharing Calendar: Error while preparing to send sharing message

Similar Messages

Maybe you are looking for