Outlook 2010 integration with OneNote 2013

I have Outlook 2010 installed and then Office 2013 installed for all other Office applications. The problem I have is when I try to click the Send to OneNote button in Outlook 2010, it still opens OneNote 2010 - not OneNote 2013. How do I fix this? I've
tried installing the latest Office 2010 service pack for Outlook 2010 - I've tried manually adding the .dll for OneNote 2013, etc.
I had this combination of apps working on another machine - but I must have done it with luck - because I sure as heck can't figure out how to get it to work on purpose on my new machine.
Jeff Dembinski

Here is some basic troubleshooting steps for OneNote and Outlook Integration Issues:
http://blogs.technet.com/b/lior/archive/2013/02/09/troubleshooting-onenote-and-outlook-integration-issues.aspx
However, we don't recommand our user install the different Office version in one machine. There might be some
Compatibility Issues between them.
Cheers,
Tony Chen
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please contact
[email protected]

Similar Messages

SSRS 2012 report integrated with SharePoint 2013 issue :Report refreshing after some idle time

we have SSRS 2012 report integrated with SharePoint 2013 , when we click on any toggle item after some idle time of 60 secs and try again to expand
another toggle item then complete report is getting refreshed and if we are in child report it is redirecting to parent report. . we didn’t set any refreshing property at report level. I hope there will be some idle time setting at sharepoint site
level.
what we observed.
1. there is no problem when we expand toggle items without any idle time.
2. when we open the report and expand few toggles and keep idle for 60 seconds and try
again to expand another toggle item then complete report is getting refreshed (all toggle items are collapsing).
3. If you keep idle for 60 minutes and if you didn’t do any action like expanding toggle
items it is not refreshing.
why it is happening and how to stop that complete refresh.
Surendra Thota

Hi Surendra,
I have tested on my local environment and the issue can be caused by the session time out ,the time out of the report precessing, database timeout,DataSet query execution timeout and so on.
I would like to confirm that the refresh you have mentioned is the page refresh or the report reloading?
Please reference to the setting below to don't limit the timeout values if you got the report reloading:
Point to a report in the library.
Click the down arrow, and select Manage processing options.
In Processing Time-out, select Do not time out report processing or
Limit report processing in seconds if you want to override that value with no time-out or different time-out values.
If you got the session timeout that refresh the page, please reference to the setting in below article:
http://msdn.microsoft.com/en-us/library/gg492284.aspx#bkmk_session_settings_section
Details information in the article below about the timeout setting for your reference:
Set Processing Options (Reporting Services in SharePoint Integrated Mode)
If you still have any problem, please feel free to ask.
Regards
Vicky Liu
If you have any feedback on our support, please click
here.
Vicky Liu
TechNet Community Support

Error while running SSRS 2012 report integrated with SharePoint 2013

Hi,
Our reporting services environment has SSRS 2012 integrated with SharePoint 2013. The SharePoint 2013 farm has 2 web front ends, 1 app server and a separate server for reporting services i.e SSRS 2012 .
We have created a https web application in SharePoint 2013 and all the SSRS 2012 reports are deployed into a "Report Library" residing in its root site collection.
The simple reports are running well. But there is a report where we have 3 multi-value parameters. On running this report in IE or Chrome, we get the error "Sys.WebForms.PageRequestManagerParserErrorException: The message received from the
server could not be parsed. Common causes for this error are when the response is modified by calls to Response.Write(), response filters, HttpModules, or server trace is enabled. Details: Error parsing near ' <!DOCTYPE html PUB'."
Some of the forums suggested to add the below entry in the web config of the SharePoint web app where the SSRS reports are deployed. We did that too, still the error is appearing. Please can anyone help .
<appSettings>
<add key="aspnet:MaxHttpCollectionKeys" value="100000" />
</appSettings>
Thanks

Hi Surendra,
I have tested on my local environment and the issue can be caused by the session time out ,the time out of the report precessing, database timeout,DataSet query execution timeout and so on.
I would like to confirm that the refresh you have mentioned is the page refresh or the report reloading?
Please reference to the setting below to don't limit the timeout values if you got the report reloading:
Point to a report in the library.
Click the down arrow, and select Manage processing options.
In Processing Time-out, select Do not time out report processing or
Limit report processing in seconds if you want to override that value with no time-out or different time-out values.
If you got the session timeout that refresh the page, please reference to the setting in below article:
http://msdn.microsoft.com/en-us/library/gg492284.aspx#bkmk_session_settings_section
Details information in the article below about the timeout setting for your reference:
Set Processing Options (Reporting Services in SharePoint Integrated Mode)
If you still have any problem, please feel free to ask.
Regards
Vicky Liu
If you have any feedback on our support, please click
here.
Vicky Liu
TechNet Community Support

SSRS 2012 integrated with Sharepoint 2013, subscription and impersonation

Hello,
We are configuring SSRS 2012 integrated with Sharepoint 2013. The reports are connecting to SSAS cubes via shared Datasources. We have defined user based roles and security in the cubes and would like to pass the effective username to the cubes when they
access data via reports.
Also we need to create subscriptions on these reports to run on either daily/weekly or monthly schedule and send email to a list of users.
How do we configure our Datasources on sharepoint so both could be acheived.
Our Database and Sharepoint are on different servers.
Thanks
Deepak

Hi Deepak
For your first question:
while configuring the datasource in SharePoint, check the option 'Set execution context to this account' in the settings. This will pass the effective user name to the cubes.
Thanks
Bala

Outlook Express Integration with SAP Business workflow

Hi,
There is a user requirement for Outlook Express Integration with SAP Business workflow for PR approvals.
They want a link to be put in there outlook inbox so that the approvers can directly release the PR's worklist without seperately login into the SAP system. We are using 4.7 version.
I went through some ABAP material where i came across T-Code SCOT and Program RSWUWFML to schedule a job to pull worklists. But Iam not sure about this.
I want to know that whether this is possible in first place and if it is then how can we do it.
Regards
Vivek Nair

Hi ,
Thanks for the link..
but its not the one I have been looking for ragarding the mentioned scenario.
!)A User will be present in both outlook express and SAP system ,when we add a security group (SG *) in outlook expressthe user will get authorization on Portal screen.
2) After assigning a role in R/3 ,we should add the security group to that use for some access permission.
Could u pls explain me how the concept could be and Integration method.
Thanks in advance
I appreciate all your help.

Is it possible to sync with both my win 7 computer (Outlook 2010), and with iCloud, without duplicating contacts and appointments? thanks.

Is it possible to sync with both my win 7 computer (Outlook 2010), and with iCloud, without duplicating contacts and appointments? thanks.

Hey keiichi-san,
Yes, It is possible. You can merge contacts, calendars, and bookmarks between multiple computers.
When you sync the contacts and calendars to your iPhone from the new computer you'll see the option to Merge or Replace, just choose Merge.
These articles provide more information on syncing options:
http://docs.info.apple.com/article.html?artnum=306071
http://docs.info.apple.com/article.html?artnum=305741
Jason

I have three iphones that synchronize with outlook 2010,each with a different profile.Two of them, running ios4.3 succesfully update contacts with the apropriate profile of windows/outlook (which is open at the time). The third iphone using ios 5.1 will a

I have three iphones that synchronize with outlook 2010,each with a different profile.Two of them, running ios4.3 succesfully update contacts with the apropriate profile of windows/outlook (which is open at the time). The third iphone using ios 5.1 will always sync contacts with the admin account, regardless of the win/outlook account being open.

I have three iphones that synchronize with outlook 2010,each with a different profile.Two of them, running ios4.3 succesfully update contacts with the apropriate profile of windows/outlook (which is open at the time). The third iphone using ios 5.1 will always sync contacts with the admin account, regardless of the win/outlook account being open.

Can Exchange 2007 to be integrated with SharePoint 2013

Can Exchange 2007 to be integrated with SharePoint 2013?

In the sense of using Incoming and Outgoing email, absolutely. But not for other things, like Site Mailboxes, which require Exchange 2013.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Exchange 2010 coexist with exchange 2013

Hi All ,
Planning to have a coexistence scenario in my environment which is mentioned below
Exchange 2010 - ambiguous url in place - OA enabled
For mapi/rpc traffic - mail.domain.in - exchange 2010
For https traffic - mail.domain.in - exchange 2010
mail.domain.in will get resolved in to cas array in exchange 2010 .
After coexistence On our side we are not going to move the mail.domain.in namespace to exchange 2013 , Instead of that we are going to use a new namespace in exchange 2013 for internal outlook anywhere and it will be outlookmail.domain.in and for the remaining
exchange 2013 services like pop,imap,owa,active sync url's,external OA will be having mail.domain.in as same as exchange 2010 namespace.
just consider outlookmail.domain.in is available on the san certificate installed in exchange 2013.
Note :
On my ide I would assume Internal outlook 2010 mapi users will connect directly to exchange 2010 servers on the namespace mail.domain.in
Likewise i would assume Internal outlook anywhere 2013 users will connect directly to exchange 2013 servers on the namespace outlookmail.domain.in
Services like pop,imap,owa,active sync ,external OA connections for both exchange 2010 and exchange 2013 from the external world will be routed from firewall to exchange 2013 servers .Then https traffic for exchange 2010 mailbox users will be proxied to 2010
exchange server via exchange 2013 server.
question : I would like to know above mentioned scenario is possible or not ?
On my side I know in my environment i am having ambiguous url's in place and at the same time i don't want the exchange 2010 internal outlook users to connect via exchange 2013 rpc over http even though OA is enabled on exchange 2010.
So simply i can say i need my internal exchange 2010 mailbox users has to connect via tcp/ip.
All of you tell me your valuable suggestions.
Regards
S.Nithyanandham

Hi,
Going Straight to the point... and answering your question...
The scenario above IS possible For a while... But going ahead in the migration process, You'd face problems once the Exch2013 doesn't know how to handle MAPI connections:
As per Exchange Team...
In this scenario where both the MAPI/RPC and HTTP workloads are using the same FQDN you cannot successfully move the FQDN to CAS 2013 without
breaking your MAPI/RPC client connectivity entirely. I repeat, your MAPI/RPC clients will start failing to connect via MAPI/RPC once
their DNS cache expires after the shared FQDN is moved to CAS 2013.
As their recommendation, and I would tell you too by experience, the best option is to really use different internal and external URLs for the clients to connect to.
change your design to use a specific internal-only FQDN for MAPI/RPC clients. If you are in the middle of a 2010 deployment using an Ambiguous
URL I recommend you change your ClientAccessArray FQDN to a unique name and update the mailbox database RpcClientAccessServer values
on all Exchange 2010 mailbox databases accordingly. Fixing this item mid-migration to Exchange 2010 or even in your fully migrated environment will ensure any newly created or manually repaired Outlook profiles are protected, but it will not automatically
fix existing Outlook clients with the old value in the server field.
So the overall for this first point is to enable the OA for all internal users, so as to ease the migration process in the future, even if for the time being its not necessary.
Also another point you should take into consideration is the version of yours OLK versions, as the minimum supported are as per below:
Outlook 2007: 12.0.6665.5000 (SP3 + the November 2012 Public Update or any later PU)
Outlook 2010: 14.0.6126.5000 (SP1 + the November 2012 Public Update or any later PU)
Outlook 2013: 15.0.4420.1017 (RTM or later)
I don't know the size of you network, but it might be necessary for you to use an inventory tool in order to identify that.
As advised, its really worthy to have a look at the following article, thus to clarify your view about this issue.
Ambiguous URLs and their effect on Exchange 2010 to Exchange 2013 Migrations
From <http://blogs.technet.com/b/exchange/archive/2013/07/17/3574451.aspx>
Hope it can help you!
Cheers,
Think before you ask, give detail as much as possible, then ask and you will get help! Always have in mind, people do not guess! :)

Issues syncing with OneNote 2013 and skydrive

Hi Support
I had a syncing issue on one of my OneNote notebooks. I used the MS help and they suggested that I confirm that the notebook is on the Skydrive web access, which it is, and then close the notebook. I have done that.
Now when i try and open the notebook by using the open notebook in One Note from the webapp, the notebook has nothing in there and it is giving a sync error.
We're sorry, something went wrong during sync. We'll try again later. (Error code: 0xE0000B70)
Can anyone help? I have tried all ways of trying to open the notebook.
I really hope that I have not lost this notebook.
Regards
Julie

Hi,
When did you get this error? When you open the notebook in OneNote 2013? Or when open it in OneNote web app?
If the notebook can be opened in web app, it means
the problem may be caused by the desktop version of OneNote. Then, we can try closing and re-opening the notebook to check the result.
If the notebook not open even in web app, it means the problem may be with your server. We can
check the
Microsoft Services status page for any known interruptions or outages.
For more information about OneNote sync problem, please refer:
http://office.microsoft.com/en-GB/onenote-help/troubleshoot-synchronization-errors-in-onenote-2010-HA102774369.aspx?ver=15&app=onenote.exe
Regards,
Steve Fan
TechNet Community Support

Outlook 2010 disconnects from Exchange 2013

One of the users running Outlook 2010 (14.0.7108.5000) randomly gets disconnected from her mailbox on Exchange 2013. The disconnect lasts about 5 min and then connection reestablishes. While outlook gets disconnected, computer does not have any problems
accessing any other network resources. Event 25 gets logged on the client when outlook disconnects and states the following. "Network problems are preventing connection to Microsoft Exchange."
Other users in the same mailbox database don't experience or notice the same issue.
The error message states that the mailbox database is offline, but it's probably misleading as the database remains online and mounted while the disconnect happens. The problems seems to follow the user no matter what mailbox database she is in.
The following information gets logged in exchange RCP Client Access log Listed in chronological order.
RopHandler: OpenFolder: [StoragePermanentException] There was an error parsing the entry ID. -> [MapiExceptionInvalidParameter] Unable to obtain the FID and MID from the entry id. (hr=0x80070057, ec=0)
ClientRPCCount=42;AvgClientLatency=00:00:00.0022142;ServerRPCCount=8;AvgCasRPCProcessingTime=00:00:00.0057500;AvgMbxProcessingTime=00:00:00;MaxCasRPCProcessingTime=00:00:00.0460000;20%ClientPercentile=10;40%ClientPercentile=10;60%ClientPercentile=10;80%ClientPercentile=10;90%ClientPercentile=10;95%ClientPercentile=20;99%ClientPercentile=20;100%ClientPercentile=50;20%CasPercentile=10;40%CasPercentile=10;60%CasPercentile=10;80%CasPercentile=10;90%CasPercentile=10;95%CasPercentile=10;99%CasPercentile=10;100%CasPercentile=50;20%MbxPercentile=10;40%MbxPercentile=10;60%MbxPercentile=10;80%MbxPercentile=10;90%MbxPercentile=10;95%MbxPercentile=10;99%MbxPercentile=10;100%MbxPercentile=10;ClientRpcFailureData:
RpcEndPoint: [ServerUnavailableException] Connection must be re-established -> [SessionDeadException] Connection is severed (ConnectionFailedTransientException). Client needs to reconnect. -> [ConnectionFailedTransientException] Cannot get row count.
-> [MapiExceptionNetworkError] Unable to get table row count. (hr=0x80040115, ec=0)
RopHandler: Logon: [RopExecutionException] Mailbox is temporarily unavailable. Error code = MdbOffline (0x00000476) -> [MailboxOfflineException] Cannot open mailbox /o=CORP/ou=Office/cn=Recipients/cn=Banger. -> [MapiExceptionMdbOffline] Unable to make
connection to the server. (hr=0x80004005, ec=1142)
RpcEndPoint: [ServerUnavailableException] Connection must be re-established -> [SessionDeadException] The primary owner logon has failed. Dropping a connection. -> [RopExecutionException] Mailbox is temporarily unavailable. Error code = MdbOffline
(0x00000476) -> [MailboxOfflineException] Cannot open mailbox /o=CORP/ou=Office/cn=Recipients/cn=Banger. -> [MapiExceptionMdbOffline] Unable to make connection to the server. (hr=0x80004005, ec=1142)
Any help would be greatly appreciated

After reviewing the entire RCP Client log on the server, I am ruling out the client PC at this moment.
The disconnect seems to be getting triggered by a Healthmailbox check that starts right before users gets disconnected.
Here is a similar problem with exchange 2010 with no answer.
http://serverfault.com/questions/474123/one-email-user-keeps-disconnecting-from-our-exchange-server
Healthmailbox associated with user's mailbox database preforms the following operations at 19:00:05.899Z
Connect
OwnerLogon
OwnerLogoff
Disconnect
a minute later, at 19:01:43.526Z Healthmailbox associated with initial mailbox database preforms the following operations
Connect
ArchiveLogon
ArchiveLogoff
Disconnect
and then at 19:01:46.479Z server logs RopHandler: OpenFolder: [StoragePermanentException] There was an error parsing the entry ID. -> [MapiExceptionInvalidParameter] Unable to obtain the FID and MID from the entry id. (hr=0x80070057, ec=0) for the
client connection and client notices the disconnect.

First timeout, push retry and then succesfull connect?! Starting Outlook 2010 connect to Exchange 2013

Hi!
Some info:
2x AD/DC Windows 2003 Native.
Previous Exchange 2003 installed, but now cleanly as it gets uninstalled.
Exchange 2013CU2v2 Aka Version 15.0 (Build 712.24)
Office 2010 with Outlook 2010 (Latest SP, and WU)
Outlook-prf configured for Outlook Anywhere. (i've also tried to configure manually, no difference)
Exchange: SAN Cert. GUI requested from ECP. This one covers all possible host names the server can use. autodiscover, owa, mail, "netbios"-name. Self issued from the internal CA. CA distributed to clients with GPO. I get NO certificate warnings
surfing to OWA, ECP.
Exchange: ECP/Server/Outlook Anywhere; Auth set to NTLM (not Negotiate)
Ping inside host names resolves to the Exchange server.
Starting Outlook.exe with /rpcdiag show two connections for a while. One of the type catalog and one of the type redirect.
Problem:
When starting Outlook you see "Loading profile" for about 30-40 seconds. /rpcdiag show two connections CID "9","11"; SERVERNAME "---","[GUID]@thedomain", AUTH and ENCRYPT is empty.
The the a dialog comes up that says that the server isn't available?!
Clicking "Retry" makes Outlook connect as it should. Everything from there works like a charm! /rpcdiag windows show that it has connection as it should.
Tried to click "Reconnect" in /rpcdiag. It also takes about 30 sec before it regains the conneciton. The part hanging there is the Type: Redirect.
So, does anyone have a clue for why it doesn't work and then does?
Can it be something wrong with the autodiscover?

Hello,
Do you mean the issue occurs when you select manually configure outlook exchange account or automatically configure outlook exchange account? If so, please make sure whether all users have the issue.
I recommend you check if there exists redirection on your rpc virtual directory.
I recommend you use "test e-mail autoconfiguration" tool to check if your autodiscover is correct.
Besides, I recommend you to enable global and advanced logging for outlook to check RPC trace events.
How to enable global and advanced logging for Outlook 2010 and Outlook 2013
http://support.microsoft.com/kb/2260527
If you have any feedback on our support, please click
here
Cara Chen
TechNet Community Support

Outlook 2010 connecting to Exchange 2013 and 2007 ... delivery fails

Hello,
we are having a problem with a few Outlook 2010 Clients that have two Exchange accounts setup in one profile. One account is connecting to the company's Exchange 2013 Server, the second account is connecting to an external provider's Exchange 2007 infrastructure
using Outlook Anywhere.
The companies Exchange 2013 was recently migrated from Exchange 2010 and this is the point where the problem started.
Some users are no longer able to send using the external Exchange 2007 account. When they try they are receiving an NDR with the following error message:
#554 5.6.0 STOREDRV.Deliver; Corrupt message content## from the external provider's servers.
When I setup a profile containing only the external provider's mailbox everything works fine until I am adding the company's Exchange 2013 back in at which point the same error appears.
We have no problems using the company's Exchange 2013 servers.
Does anyone have an idea what causes this and how to resolve it? The external provider is uncooperative in troubleshooting so we are left with the problem.
Thank you
Sascha

Hi,
The problem should be related to the External Exchange 2007.
Please refer to this kb below:
http://support.microsoft.com/kb/2203381/en-us
This problem occurs when the email message is a multipart/mixed MIME message which contains a text/plain body and an application/applefile body. If the corresponding body is not a real application/applefile body, the Exchange Server 2007 server considers
that the email message is invalid. Therefore, it generates the NDR. However, Exchange Server 2010 can deliver this kind of email message successfully.
To resolve this problem, you should let the External Provider install the following update rollup:
2279665 Description of Update Rollup 1 for Exchange Server 2007 Service Pack 3
Hope this helps.
Thanks,
Melon Chen
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click
here

Microsoft Office 2010 Integrated with SP2 ISO image

Sir from where i can download Microsoft Office 2010 (32bit/64bit) Pro/ProPlus Integrated with SP2 ISO images.

As I know, there is no legal download of Windows, apart from the enterprise trial version, you can buy a physical copy, then made the iso form the DVD's.
and integrate office 2010 SP2 with the iso
Office 2010 and SharePoint 2010 Service Pack 2 Availability
http://blogs.technet.com/b/office_sustained_engineering/archive/2013/07/16/office-2010-and-sharepoint-2010-service-pack-2-availability.aspx
Regards
Yolanda
TechNet Community Support

How can I sync my Outlook 2010 calendar with Gmail Calendar now that Google Sync is no longer available

My iPhone 3 had been syncing fine with Outlook 2003 via Google Sync. I recently had to reload my PC, wiped it and installed Outlook 2010 as part of the reload; when I tried to install Google Sync I learned it was no longer available for download after December 14th.....I did have it on another PC, moved it over but got an error message. So I am no longer able to make calendar changes on my iPhone and have them sync to Outlook or vise versa. In addition my Google calendar is now empty....
Anyone know of a way to enable a sync between Google Calendar and Outlook 2010
Is there a way to add or import my Outlook Calendar to Google Calendar?
Why is all this stuff so complecated!??

no you can not do that. You can sync any web calendar that supports web dav to lightning, but Microsoft have chosen to not use the open standard and instead only offer a Microsoft Proprietary interface. Nothing new here though. They only offered a Microsoft Proprietary interface to download mail for many years. They call it innovation. I call it vendor lock in.
Interestingly enough you can sync office 365 calendar via OWA but not outlook.com

Outlook 2010 integration with OneNote 2013

Similar Messages

Maybe you are looking for