Outlook 2010 loads but does not display on monitor

Very strange problem. When I click on Outlook 2010, the splash screen appears and it seems to load, but does not appear on my monitor. Task Managerr shows the application is running, so I guess it is there somewhere. All the other Office 2010 programs work
fine.
I am running Win 7 Professional 32bit, dual core 2.7 cpu, 4 gb ram. Everything else works fine. I was having a problem with Outlook 2003 crashing and had not tried Outlook 2010.
Have the same problem in Safe mode.
I did run scanpst.exe and it only found (and repaired) a few files that it felt were not important. I transferred my .pst file to my wife's computer and her copy of Outlook 2010 opened it fine. I used her computer to delete all items in the
"deleted" file. My total pst file is about 142mb. I have defragmented this hard disk. I don't have a Win7 installation disk because I downloaded the Office 2010 file and used a legitimate key to activate it
I think there is a simple answer. Appreciate your help in finding it.

I found my problem.
“Add-ons” were the source of the problem.
I believe there was a conflict between two programs:
Norton’s Security Suite and AnVir Security Suite.
Both were trying to scan my incoming e-mail.
I uninstalled AnVir, reset Outlook back to its original configuration (i.e. reversed all the changes I described above), and my problem is gone.
Not sure why this problem took so long to appear as both programs had been install for at least a month without issues.
I used AnVir and ZoneAlarm for over a year together without issues.
However, about one month ago, I uninstalled ZoneAlarm and installed Norton’s Security Suite.
In any event, uninstalling AnVir solved the problem.
Uninstalling Norton’s and keeping AnVir would probably work as well.

Similar Messages

FF loads but does not display

Since the upgrade to FF3.6, I've had several annoying glitches.
1 Dclick desktop icon, FF loads into memory, but does not display. End task. Then Dclick the icon again. This time FF loads and displays normally.
2. After closing FF with Save & Quit, next time I open FF, error message : "Well this is embarrassing, can't recover tabs". Start new session. FF opens with last tab instead of default site.
3. On some sites I click icons and nothing happens. Sometimes other icons on same page will open, but most won't. Internet Explorer will open the same icons, so the Problem seems to be in FF.
Am I the only one with these nuisances? Any help will be appreciated.
== This happened ==
Every time Firefox opened
== after upgrade to FF 3.6

Hello John.
You may be having a problem with some Firefox add-on that is hindering your Firefox's normal behavior. Have you tried disabling all add-ons (just to check), to see if Firefox goes back to normal?
Whenever you have a problem with Firefox, whatever it is, you should make sure it's not coming from one of your installed add-ons, be it an extension, a theme or a plugin. To do that easily and cleanly, run Firefox in [http://support.mozilla.com/en-US/kb/Safe+Mode safe mode] and select ''Disable all add-ons''. If the problem disappears, you know it's from an add-on. Disable them all in normal mode, and enable them one at a time until you find the source of the problem. See [http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes this article] for information about troubleshooting extensions and theme. You can troubleshoot plugins the same way.
If you want support for one of your add-ons, you'll need to contact its author.

Firefox loads but does not display

1. When I double click the Firefox icon on my desktop the firefox.exe application loads (per the Task Manager) but it does not display. I have to use Task Manager to end the process. FF will usually display on the second try, but I often get a "this is embarrassing" message. This has been going on fore several months.
2. I don't know if this is related to the loading problem, but I frequently have to shut down & restart FF because some Bookmarks don't work when I click on them. Usually my Home Page icon at the top will work, but those in the Bookmark sidebar don't.

I am surprised that 17 other people have this problem and no one has any ideas.
Basically, I have had to abandon the use of Firefox and use IE ... is this a Microsoft conspiracy? I really like Firefox ... I am devastated.

Page loads but will not display

I have an IP address that allows me to view my cctv cameras.It works fine with Internet Explorer,but when i enter the same address in to my safari browser the page seems to load but will not display anything.
I assume its some thing do with my internet security settings but do not now where to find them to allow this site. Can any one help please.
Thanks

Try temporarily turning off your firewall via SystemPreferences>Security>Firewall. If the site then works you can turn the firewall back on and specifically allow Safari.

Screen briefly flashes white but does not display the page when the Safari icon or other icons are tapped.

A problem has just started with my IPAD Air after 3 months of use.
If I try to open Safari by tapping on the icon the screen briefly flashes white but does not display the page.
Similarly if I try to open Settings page, Mail page, Calendar or Clock the screen just briefly flashes but the Apps do not run.
Some of the Apps do work on tapping the icon e.g. Maps, iBooks, Appstore, iTunes, Newstand etc.
I do have some website links which display when the icon is tapped e.g. John Lewis but some links do not work.
I have ensured that the ipad is fully charged, powered it off an on again, and cleaned the screen with a lint free cloth but the
same problem keeps occurring.

I saume you used a second display at one time, otherwise the Display settings wouldn't be treating your primary display as a secondary.
IF you open your System Preferences>Displays (-System Preferences) and click "Gather Windows" it should pull everything to the display on which you clicked it.

The workspace page loads, but does not enable the toolbar.

Dear,
I'm using the EPM11.1.2.2. The workspace page loads, but does not enable the toolbar with the "Explore". Can anyone help me?
thanks

Maybe you have not installed and configured the RAF components.
Cheers
John
http://john-goodwin.blogspot.com/

When I click the Editor, it loads but does not open the Editor page. Options?

When I click the Editor, it loads but does not open the Editor page. Options?

Try making separate desktop icons for the Editor and Organizer. You can then launch directly. The standard desktop icon is for the welcome screen which often runs in the background or doesn’t shut down properly.
Start by right-clicking on the desktop and select:
New >> Shortcut
Then browse to:
C:\Program Files\Adobe\Photoshop Elements 13
Inside the Photoshop Elements 13 folder make sure you select the application (not a shortcut) by scrolling down to the files beginning with the letter P and highlighting ‘PhotoshopElementsEditor’
Then click next followed by finish.
You can repeat for the Organizer using the different file path.
New >> Shortcut
Then browse to:
C:\Program Files\Adobe\Elements 13 Organizer
Highlight ‘PhotoshopElementsOrganizer’
Then click next, followed by finish.
Now that you have your separate desktop icons you can delete the one for the welcome screen, if preferred. On Mac try launching directly from Applications. [if not using PSE13 substitute your own version and go to Program Files (x86)]

Yosemite - MacBook Air 10.10 - "Notes" does not open - "Preview" opens, but does not display PDF's - "iCal" works in new strange ways, as if no one checked its operation - Everything worked very well until Upgrade to Yosemite ! - Happen to others?

Yosemite - MacBook Air 10.10 - "Notes" does not open - "Preview" opens, but does not display PDF's - "iCal" works in new strange ways, as if no one checked its operation - Everything worked very well until Upgrade to Yosemite ! - Happen to others?

Thanks for your lengthy reminder dude, I have a similar Mac with yours. I suspect its a software fault because it happens after I upgraded to Lion, 10.7.2.

TS5148 Apple TV powers up but does not display all of a sudden. Tried all of the advice on this page to no avail. Any ideas?

Apple TV powers up but does not display all of a sudden. Tried all of the advice on this page to no avail. Any ideas?

Try resetting the SMC and PRAM
Intel-based Macs: Resetting the System Management Controller (SMC)
About NVRAM and PRAM
However, I suspect you zapped the Mini, maybe the lower voltage part since you siad the fan works.
The power surge could have went into HDMI and damaged the TV.
Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

This Formula(Function) compiles but does not display any result

Please can anybody help me resolve this issue.The code below is a code for a formula(function) column in oracle report, i have complied this code and it successfully complied but it does not display any result for the column having a stock balance in the entire report.
function CF_STOCK_BALFormula return Number is
     v_all_positive NUMBER;
     v_all_negative NUMBER;
begin
     IF :transaction_type IN ('RECEIPT', 'RETURN') THEN
          IF :cp_stock_bal IS NULL OR :cp_stock_bal = 0 THEN
               :cp_stock_bal := :opening_balance + :cp_stock_bal + :quantity;
          ELSE
               :cp_stock_bal := :cp_stock_bal + :quantity;
          END IF;
     ELSIF :transaction_type IN ('ISSUE') THEN
          IF :cp_stock_bal IS NULL OR :cp_stock_bal = 0 THEN
               :cp_stock_bal := :opening_balance + :cp_stock_bal - :quantity;
          ELSE
               :cp_stock_bal := :cp_stock_bal - :quantity;
          END IF;
     END IF;
RETURN (:cp_stock_bal);
end;
Edited by: Gbenga on Jan 17, 2012 11:30 PM

Please can anybody help me resolve this issue.The code below is a code for a formula(function) column in oracle report, i have complied this code and it successfully complied but it does not display any result for the column having a stock balance in the entire report.
function CF_STOCK_BALFormula return Number is
     v_all_positive NUMBER;
     v_all_negative NUMBER;
begin
     IF :transaction_type IN ('RECEIPT', 'RETURN') THEN
          IF :cp_stock_bal IS NULL OR :cp_stock_bal = 0 THEN
               :cp_stock_bal := :opening_balance + :cp_stock_bal + :quantity;
          ELSE
               :cp_stock_bal := :cp_stock_bal + :quantity;
          END IF;
     ELSIF :transaction_type IN ('ISSUE') THEN
          IF :cp_stock_bal IS NULL OR :cp_stock_bal = 0 THEN
               :cp_stock_bal := :opening_balance + :cp_stock_bal - :quantity;
          ELSE
               :cp_stock_bal := :cp_stock_bal - :quantity;
          END IF;
     END IF;
RETURN (:cp_stock_bal);
end;
Edited by: Gbenga on Jan 17, 2012 11:30 PM

Siebel Charts gets generated but does not display in the Web client

Siebel Chart is getting generated in NetChart4.6\Server\root\projects\Siebel.chart folder. However does not display on the Web client
There is either no error displayed on the front end...
Also note that Charts is installed on Windows environment and Siebel Server is installed on Linux Server

Dear User,
Thanks for using Oracle communities.
Does this happens in dedicated client as well?
We would need to have traffic captured when you are actually executing actions. The tools like fiddler etc will help here to track the traffic.
I would suggest you open SR with MOS since it will need some analysis on network trace like fiddler. You can refer this thread in SR as well, so that once issue gets resolved thread will get updated with solution which will benefit others.
Best Regards,
Chetan

Movieclips loader loads png but does not display image in ie

hello, i have created a static class to deal with the loading
of images, it works great. yesterday, i found an issue: i try to
load png files (those pngs are generated with quasimondo's bitmap
exporter), they do load, but they are not displayed in ie.
it worked until recently. is there some specification about
the png that i have to make sure that the png has? or is there an
issue using the movieclip loader with ie?
i included the actionscript class (save the code in an .as
file), so if you want to test, write only this in the first frame
of your code:
import com.iCongo.utils.MovieClips;
this.createEmptyMovieClip ("placeholder",
this.getNextHighestDepth ());
MovieClips.loadIMG (this.placeholder, "
http://somedomain.com/somepng.png");
that image will load, but in the context of my flash file
where many many files are loaded at the same time, only the block
generated by the bitmap exporter will not show.

OOPS
cancel that question. i ftp'd the file to the server again, this time setting the transfer type to binary and the png image comes up
just like it should.
john

Outlook 2010 SP1 Profile Does Not Update After Moving Mailbox Between Exchange 2010 SP2 Sites

I am working on a large mailbox migration from one AD site to another.
Exchange version at both sites:Exchange 2010 SP2
Two Mailbox Servers: MBX01 in site A / MBX02 in site B
(There is a DAG but keeping this simple)
Two CAS Arrays: CASA.domain.com / CASB.domain.com
The RPCClientAccessServer property is set accordingly. Where MBX01 is set to CASA.domain.com and MBX02 is set to CASB.domain.com
Clients:Outlook 2010 SP1
Scenario: I successfully move a mailbox from Site A to Site B. The Outlook client does not automatically update its server settings to point to the new cas array (CASB.domain.com) and continues to connect to the old CAS server (CASA.domain.com).
I have seen a few articles regarding this pointing to workarounds such as:
- repairing the outlook profile on the client
- delete the existing outlook profile
- run a script to update the prf file (re-cache's email at the client)
I am interested in knowing if anyone else has experienced this, what their solution was for a large migration and if any roll-ups or service packs have possibly fixed this problem.
I would also like to know if you have seen this affect ActiveSync devices. I am getting mixed results in my tests and thought it may be contributed toward different device types, mobile os versions, etc...
I have posted this to the Exchange 2010 forum as well, just wasn't sure where to start.
Thanks.
Mike

Hi,
Seems you got several replies in the thread below that you posted in Exchange forum:
http://social.technet.microsoft.com/Forums/exchange/en-US/68ae67c1-59f5-44bb-aadc-0aea3f72ad2d/outlook-profile-not-updated-to-new-cas-array-after-mailbox-move-between-sites?forum=exchange2010#68ae67c1-59f5-44bb-aadc-0aea3f72ad2d
Please come back to the thread above and check if the replies are helpful.
Since this issue is more related to Exchange, we can provide rarely assistance on this problem. If you need any help on Outlook client side, please don't hesitate to let me know.
I would appreciate it if you could post the solution here when you found it, so that other community members who have same question in this forum will benefit from it.
Best Regards,
Steve Fan
TechNet Community Support

Outlook 2010 Starts but is not Visible

Outlook will start but no window will show. The task bar shows Outlook is open and I can right click "New Message" (and all others) and it will show. But the main window is gone. Recently (last couple of months) the window has been
opening very small; not much bigger than an icon. PC is 18 months old; everything up to date; Office is 4-6 months old.
I tried opening Outlook in safe mode (Start: Outlook /safe) but the same result occurred.
Any help appreciated. Thanks, Chris
Windows 7 64-bit; Office 2010; Alienware Aurora i7-920 factory overclock

Hi Chris,
Can you check the below things..
1. Check whether HIDE WHEN MINIMIZE option is selected - by right clicking the outlook icon on the right corner
2. If it is ok, then run the below outlook switches
Close outlook - Start - Run - Type the below outlook switches
Outlook /resetnavpane
Outlook /nopreview
Outlook /recycle
Outlook /restore
either one of the outlook switch will display the outlook 2010. If you are still facing the issue, kindly past the print screen of the desktop when outlook is openend
Thank you

Double tapping Outlook 2010 Calendar appointment does not open it in Lenovo ThinkPad Helix with Windows 8 Enterprise

I've found out a strange behaviour of Office Professional Plus 2010 (SP1) calendar appointments in Windows 8 Enterprise touch screen device (Lenovo ThinkPad Helix): if I try to open the appointment by douple tapping, it does not open, but in many cases
the appointment is just moved forward for half an hour. With normal mouse douple clicking works fine. Office SP2 does not fix the issue. So maybe this is not an Office, but Windows problem?

Hi,
It’s really a weird behavior. It’s not possible to write on the calendar items in Outlook by double tapping. Did this behavior change all appointments time or just the one you tapped on? Please log on the OWA and check if the appointment time changed there.
Meanwhile, please try the following troubleshooting steps:
1. Start Outlook in safe mode and check if the issue persists. (Press
Windows key + R, type “outlook.exe /safe” in the
Run box, press Enter)
If the issue would be gone in safe mode, please go to File > Options > Add-ins and disable the suspicious add-in to resolve the issue.
2. Try reset your calendar current view and check the result.
Also try to change to another view (such as List view) and double tapping the appointment to check the result.
3. Do you have any other calendars? If so, please check this issue in other calendars.
Thanks,
Steve Fan
TechNet Community Support
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Outlook 2010 loads but does not display on monitor

Similar Messages

Maybe you are looking for