Outlook 2010 not connecting exchange server

We have Exchange server on remote site. we have installed win7 SP1 and office 2010 SP2 and updated the system as well. but
outlook 2010 is always "asking password" or it shows "trying to connect" in status bar and then it got disconnect. i have tryied configured NTLM authentication, https proxy settings everything i have tryied as mentioned in
blogs but it doesn't worked out to me but outlook is working fine in other system with same settings and H/W and S/W. can any one kindly help me on this

Hi,
You can first use Remote Connectivity Analyzer to test if you can connect to the Exchange server:
https://testconnectivity.microsoft.com/
We may need to repair the Outlook profile to fix the problem:
In Outlook, click the arrow next to Account Settings on the
File tab, and then click Account Settings.
In the Account Settings dialog box, select your account on the
E-mail tab, and then click Repair. Follow the instructions in the repair wizard.
When the repair is finished, restart Outlook.
As you mentioned, Outlook always asks for password. If the issue persists, check this setting:
Go to File tab -> Info -> Account Settings -> Account Settings…
Highlight your Exchange account and click Change button.
Click on More Settings button.
Select the Security tab.
Under the User Identification, make sure the “Always prompt for logon credentials” option is not selected.
Outlook may continuously asks for password due to the corrupted credentials, we can try the following steps as well:
Go to Control Panel, and then click Credential Manager.
Note If View by is set to Category, click User Accounts first, and then click Credential Manager.
Locate the set of credentials that has Outlook in the name.
Click the name to expand the set of credentials, and then click Remove from Vault.
Repeat step 3 for any additional sets of credentials that have the word Outlook in the name.
I hope the information is helpful.
Regards,
Melon Chen
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Similar Messages

Outlook 2010 not showing Exchange 2010 archives, OWA does.

We have activated Exchange 2010 archives for all users but most of them are not showing up in their Outlook, but everyone can see them in OWA.
Office 2010 Standard - MAK licenses, 2 distinct keys
Majority of systems are Windows XP, some Vista and 7.
Through testing it seems to be a system problem. Using 3 test accounts I log onto various systems, some freshly reimaged, some pre-existing. The test account profiles were new to each system. Sometimes the archive folder would appear, sometimes it wouldn't,
but it was consistent per computer. Meaning that if the folder didn't appear for 1 person, it didn't show up for anyone on that specific computer.
Anybody know how to fix this? Am I missing a setting or registry key somewhere?
Thank you for any help,
Greg

Ok, just spent some time looking into this more, if you google "office 2010 suite and version comparison guide pdf" and locate the .pdf file and open it, on page 17 under
Managed E-Mail Folders & Retention Policy:
"Provide a secondary location for users to store their e-mail messages and
manage their mailbox quota with new online managed folders. Unlike localOutlook Data Files (PSTs), this information can be backed
up and managed by Exchange Server." - is an Office Professional Plus feature only.
So, it would appear that we now not only have to purchase an enterprise CAL for Exchange, but Office Professional Plus as well so we can, I suspect, use the
one extra useful feature that most sys admins wanted Exchange 2010 SP1 for in the first place, which is so centrally manage e-mails and e-mail archives. Whilst this may not be a big deal for larger companies, educational institutes
etc, as the sys admin for a small private business with 70 users, this extra cost hurts. As for the lack of clarity - if you want to tie up Office versions with Exchange functionality, how about standardizing naming conventions - call the Exchange
CALs "standard" and "professional" to match the required Office clients, or rename Office Professional to Office Enterprise - either way, match up the client apps and CALs to make it clearer.

Outlook 2013 not connect with Exchange server 2013 in internal network

Hello All,
I Have two Exchange server 2013 in our environment. Both server install mailbox and CAS role. After configure exchange server 2013, Outlook 2013 not connect in internal network. I have configure outlook manually. i tried by using the suggestion from blog
but not work. Outlook show that Server cannot connect/ server name could not be resolved. in outlook setting i also put exchange proxy setting. In exchange admin center i have changed the OWA, OAB, Auto discover name. But still not work.
I know that outlook can be connect from external by using ssl certificate and publish outlook anywhere but i did my configure from internal network.
Can you please suggest as soon as possible.
Thanks,
Parvez

Hi,
Firstly, I’d like to explain, same with external users, internal users use Outlook Anywhere to connect with Exchange server and use Autodiscover get all settings.
Thus, let’s try the following resolutions:
1. run the following command: get-clientaccessservice |fl autodiscoverserviceinternaluri
2. check if the host name in the above URL is in the DNS server and there is a DNS entry about the host name points to the proper IP address.
3. Check if the above host name is in your certificate.
Thanks,
Angela
Angela Shi
TechNet Community Support

Is there a way to sync outlook calendars with Imac, Ipad, Iphone calendars. I am not running exchange server.

Is there a way to sync outlook calendars with Imac, Ipad, Iphone calendars? I am not running exchange server.

hello,
BlackBerry devices do not support ActiveSync.
you have several ways, from best to less good :
1)
if your company has set up Outlook Web Access, you can use the BIS connection of your device to connect to the Exchange server (email + Address book) through the url of the Outlook Web Access. The OWA needs to be accessible from outside the company.
2)
if your company has setup an external link to the exchange server (can be accessible from outside the company), you can configure your BIS directly to the Exchange server (email only if I recall correctly)
3)
if your company allows it, on your PC you can setup your email account to automatically forward all incoming emails to a third party email (like GMail or Hotmail), and then configure BIS to connect to that email provider. You will get push email. You can then setup a reply-to: field.
4)
use a Windows Mobile phone that has the ActiveSync feature.
The search box on top-right of this page is your true friend, and the public Knowledge Base too:

Microsoft outlook 2010 not working after installing proxy server and ForeFront TMG firewall

I am trying to have Outlook 2010 work though proxy server recently installed on internal network, I have configured IE to use the proxy settings, but I cannot find the
same with Outlook 2010, I want to clarify that we use Outlook 2010 to connect to internet email and we installed ForeFront TMG firewall on the proxy server and as a result of that we changed the IP settings and after that Outlook stopped sending and receiving
mails and gives error: “receiving reported error (0x800408fc): 'The Server name you entered cannot be found (it might be down temporarily).”
So please help us by sharing how to fix this issue to make Outlook work though proxy server
Thanks

Hi,
Are you using Exchange account? If you are changing your Exchange account to use a proxy server, I suggest we can create new profile and automatically re-configuring your account with autodiscover service to have a try:
http://support.microsoft.com/kb/829918
If the account can’t be configured automatically, please manually configure the account and change the settings for procy server:
1. In the Account Settings dialog box, click the
Email tab, click to select the Exchange account, and then click
Change.
2. Click More Settings. On the Connections tab, click
Exchange Proxy Settings.
3. In Connection settings, type the proxy server FQDN under Use this URL to connect to my proxy server for Exchange, click OK to have a try, and then click
OK to save all settings.
4. Restart Outlook.
Regards,
Winnie Liang
TechNet Community Support

Receive email delay one hour using Mac Mail client (Mountain Lion) connect Exchange Server 2010

Hi all,
My boss use iPhone, iPad, MacBook Air (Mac Mail client), MacPro (Mac Mail client) connect Exchange Serve 2010 to receive emails. All clients are okay except MacBook Air, the Mac Mail client cannot receive the latest emails from Exchange Server, but it can receive (sync) the emails after one hour. The other clients can receive the latest email after Exchange Server receive new emails immediately.
In this period, the MacBook Air can receive the other IMAP, POP3 and webmail from ISP normally. I tried to set 5 mins to check emails or manual check email from Exchange Server. However, the latest email still delay one hour.......... .
I dumped a screenshot for Mac Mail setting for Exchange Server and a Log file.
could anyone help me to solve this issue?
Thanks

I am not sure what the user has the check for new messages set for but mail does arrive as short as 2 minutes. It does however arrive on his iphone immediately first.

Cannot connect to an Exchange account in Outlook 2013 using "Microsoft Exchange Server or Compatible Service"

Dear All,
I cannot connect to my Exchange account in Outlook 2013 using "Microsoft Exchange Server or Compatible Service".
First I would like to present my network environment, I have 4 physical servers;
The first one is holding the Domain Controller 1, IP@: 192.168.1.10
The second server is holding the additional Domain Controller which it is DC2, IP@: 192.168.1.11
The third server is holding the Exchange 2013 Mailbox, IP@: 192.168.1.15
And the last server is holding the Exchange 2013 CAS-HT, IP@: 192.168.1.16
I am doing the steps below:
1-Creating a new profile in outlook and start configuring the exchange account by entering the IP address of the Exchange-CAS Server, 192.168.1.16
2-entering the account name: [email protected]
3-Go to "More Settings" > "Connection" > "Connect to Microsoft Exchange using HTTP" > and entering the "Exchange Proxy Settings"
4-type the exchange CAS Server URL, https://192.168.1.16
5-Check the "Connect using SSL Only"
6-Authentication Settings: "NTLM Authentication", and pressing Apply
7-When I press the "Check Name" button, a message occurred> "The action cannot be completed. The connection to Microsoft Exchange is unavailable. Outlook must be online or connected to complete this action".
8-I go back to the "Exchange Proxy Settings" and I Uncheck the "Connect using SSL Only" and pressing Apply
9-i press the "Check Name" Button, a small window occurred to enter a Username and Password, so I enter the Administrator username and the administrator password and pressing "OK", but nothing is changed, I tried to enter my
username and password in the small window and I still got the same result.
I cannot verify the account name and I cannot complete the process.
I appreciate you kind assistance.

Hi,
To narrow down the cause, I’d like to recommend the following troubleshooting:
1. Try to login the test account through OWA.
2. Check the Autodiscover settings: get-clientaccessserver |fl autodiscoverserviceinternaluri
3. Check the result of directly accessing the following URL:
https://autodiscover.domain.com/autodiscover/autodiscover.xml
Thanks,
Angela
Angela Shi
TechNet Community Support

Iphone 3 and 4 can not connect to server

We have been syncing e-mail to IPhone for 2 + years, Last night we stopped getting mail on our Iphones and other smart phones.
Using Exchange 2003 server.
Rebooted twice today - not seeing any sync errors in event log
Deleted my account, hard boot of IPhone and recreated account - still getting error “ can not connect to server” in mail
What is strange it is only mail – I can move an appointment and it updates my outlook calendar
Any suggestions much appreciated!

This resolve my problems
With that error noted, a search brought me to a solution:
http://alan.lamielle.net/2009/09/03/windows-7-nonpaged-pool-srv-error-2017
Set the following registry key to ’1′:
HKLM\SYSTEM\CurrentControlSet\Control\Session Manager\Memory Management\LargeSystemCache
and set the following registry key to ’3′:
HKLM\SYSTEM\CurrentControlSet\Services\LanmanServer\Parameters\Size
Explanation of what the reg keys do: http://www.decuslib.com/decus/vmslt99a/nt/tips.txt (scroll to bottom)
Thanks to Alan LaMielle and Mark Russinovich.

In e mail can not connect to server i fill out the info and get this

when i try to get e mail i get "you can configure e mail in just a few steps" when i follow the directions i get"can not connect to server"? thanks

On another note Im just checking the external and internal web server names on my server just to be sure that its not an internal server issue - here is the weblink I have been going through - I will test and let you know .
Mac Mail is set to auto discover the settings http://premnair.wordpress.com/2010/07/03/configure-ews-autodiscover-owa-oab-ecp- on-exchange-server-2010/

Upgrade directly from Exchange Server 2010 SP1 to Exchange Server 2010 SP3

Hi,
We have current setup with Exchange Server 2010 SP1 ( DAG & CAS Array with WNLB).
Can we upgrade directly from Exchange Server 2010 SP1 to
Exchange Server 2010 SP3 . ?
Thanks in Advanced.
Regards,Ali

Hi Ali,
Yes, you can. Please upgrade your Exchange 2010 SP1 server roles in the following order: Client Access, Hub Transport, Unified Messaging, Mailbox, Edge Transport. What's more, please note that when you install a Service Pack or update rollup on a server
that's a DAG member, several services will be stopped during the installation, including all Exchange services and the Windows Cluster service.
For more information, here is a helpful article for your reference.
Installing Update Rollups on Database Availability Group Members
http://technet.microsoft.com/en-us/library/ee861125(v=exchg.141).aspx
Hope this can be helpful to you.
Best regards,
Amy Wang
TechNet Community Support

I am trying to turn on iCloud, I get a message "can not connect to server". How do I connect to server?

I can't get iCloud to turn on. When I try to start it I gat a message "can not connect to server". How do I start the cloud?

So what model and year is your machine?
Here are the requirements for ML:
http://www.apple.com/osx/specs/

TS1843 Not receiving apple mail. Connection Doctor says not connected to server. Yet receiving gmail and yahoo mail.

Not receiving apple mail. Checked connection Doctor. Not connected to server, yet receiving gmail and yahoo mail.

No, I have a Mac and my email connects via our pacbell account we've had for years. However, something in the Preferences/Accounts is not correct I am guessing. Also, it asks for the password and if I put it in and click save through general or viewing, it's NOT saving it and still not allowing me to get email. My husband tried reading about this through our AT&T acct and said to change the incoming server to imap.mail.yahoo.com and outgoing smtp.mail.yahoo;[email protected], but now I can't receive or send any email on my Mac. In advanced not sure if it should be Port of 465 or 900 something or other and SSL checked or not. I called AT&T and they want to take over my machine by charging $15/mos for a year to fix this. Ridiculous.
So, everytime prior to yesterday, when my husband messed around with it, I was getting a POP needs password box, typed in my password, but to no avail..Then it Keychain password popped up and assumed it was the same, but there's no way to change or modify it even using the new password my husband set up through AT&T. I am at a complete loss.
I can access mail through yahoo mail and it takes me to AT&T Yahoo Mail, but no contacts are there so needless to say this is a pain.
I appreciate any assistance you can give me so I can get back on my email as I have for 4 years.
Thanks Hackintosh...I look forward to hearing from you....you can use the email above and it will come to me through my yahoo web page....Thanks again and let me know if you need any other information. If you respond on here, I may not get the answer from you as I didn't know you responded until I came on discussions. THanks

Ipad 2 can not connect to server after 2 day internet outage

Situation:
Internet access was down 2 days and was just restored
Restarted router
iPad 2 connected to appropriate wifi network, but got error message "could not connect to server" when using Safari. Also, could not access any other internet related service like web email.
Other devices --- iPad air, Mac, PC laptop and 2 iPhone 4s ---- were able to connect and access internet successfully.
Actions Taken:
Powered off iPad 2 and then restarted it. No luck.
On iPad 2, turned off wifi setting and then turned it back on. It connected to appropriate network, but still could not connect to server.
Reset router again --- no luck.
Question:
Any suggestions?

Try the following:
1. Turn router off for 30 seconds and on again
2. Settings>General>Reset>Reset Network Settings
3. Reset iPad; hold the Sleep and Home button down until you see the Apple Logo

I downloaded Lion OSX and at the end I received a notice that Safari can not connect to Server. All internet connections work including Safari on other user on same computer. I downloaded 13items and installed only 12. What do I do now ?

I dowloaded Lion OSX and installed. I downloaded 13 iitems and installed only 12. At the end of the insta;;ation I received a notice thst Safart can not connect to Server. Safari does not work on user where installation was made. It work on other user. All internet connections work including google. If I go into Safari the blue line goes up to end of "http" on adress and freezes. Where do I go from here.:::???

Hi There Linc Davis,
Wow, you are the best.
Yip this is what the website looks like. Great job Linc Davis.
Not surprised that the "Shop" tab is missing. Darn.
Well can you try to access it's "sister" website: astralmusic.com and astralmusicshop.com?
Since you are awesome with the "Flash" can you investigate if this website has a issue withis this "Flash" too?
Please Linc Davis

Connection test to database failed: could not connect to server

I restarted one of my HPOV NNMi 9.23 servers this morning and NNMi is no longer loading. I am seeing the following errors in the logs indicated:
/var/opt/OV/log/nnm/public/nmsdbmgr.log
04/06/2015 09:28:05 AM Connection test to database failed: could not connect to server: Connection refused
Is the server running on host "127.0.0.1" and accepting
TCP/IP connections on port 5432?
/var/opt/OV/log/nnm/public/postgres.log
2015-04-06 09:25:55.312 EDT: :8580:0LOG: could not translate host name "localhost", service "5432" to address: Name or service not known
2015-04-06 09:25:55.312 EDT: :8580:0WARNING: could not create listen socket for "localhost"
2015-04-06 09:25:55.312 EDT: :8580:0FATAL: could not create any TCP/IP sockets
I checked /etc/hosts and found the following entry:
#; Local
127.0.0.1 localhost
From the command line I can ping localhost with no issue. Not sure why NNMi is not starting at this point.
This question was solved.
View Solution.

I also attempted to do a reset using nnmresetebdb.ovpl. I recieved the following:
Attempting to reset the embedded database...
Starting nmsdbmgr process for database reset...
nmsdbmgr process did not restart successfully - please try reset again.
When I run ovstart -c I receive the following:
Name PID State Last Message(s)
OVsPMD 29831 RUNNING -
pmd 29832 RUNNING Initialization complete.
nmsdbmgr - NOT_RUNNING - Exit(1)
ovjboss - UNSTARTABLE -
nnmaction - UNSTARTABLE -
ovspmd: Attempt to start HP OpenView services is complete.
I definitely need some help with this please!
Thanks!

Outlook 2010 not connecting exchange server

Similar Messages

Maybe you are looking for