Outlook 2010 or earlier versions are not recognized in PSE 9 under Windows 7 64 Bit

Hello, is there any info available "to convince" Photoshop Elements to recognize a installed Outlook 2010 and to work with Outlook 2010 in a WIN 7 64 Bit system?
In my Photoshop elements 7 and 9 versions it is not possible withinPSE 9 or PSE 7 under windows 7 64 Bit to select Outlook as a valid parameter under the otion settings within Elements to handle emails functions within PSE properly.....

Yep. I agree with the above comments. Other users have reported issues while working with outlook 64 bit. Here is one such discussion http://forums.adobe.com/message/3289324 .
Thanks

Similar Messages

Network controller is not recognized on Satellite A100 under Windows XP

Hi all!
I have purchased a Satellite A100 PSAAR and I have performed a clean install of Windows XP on it. I have installed all the drivers in the correct order(downloaded them from the support page) but I still have one problem:
In the device manager the ethernet controller and the network controller show up with a yellow exclamation mark and they are not recognized. I downloaded the lan driver and I got it to recognize the ethernet controller. However no matter how hard I tried, I cannot find the suitable driver for the NETWORK CONTROLLER which still shows up in the device manager in yellow color.
I could really use any help here...Thank you in advance.

Please note that Wireless Lan card is placed under the Network adapters too!!!
If you have installed the LAN (Ethernet) driver and the card was installed you should also check if a WLan card driver is needed!!!!
By the way:
If the LAN card was not recognized try this Intel Lan driver:
Intel 8256x Ethernet Controllers
http://downloadcenter.intel.com/Product_Filter.aspx?ProductID=999&lang=eng
Good luck

SB (model 0220) Live 5.1 NOT RECOGNIZED by the computer (under Windows

What do I need to do? Thanks.

Guys: I'm new to this forum and to Creative SBO220 sound cards. I just bought an OEM card and installed it on 6/22. I had trouble with no sound until I realized that I had to go to Control Panel>Sounds and change my defaults. After that, the sound was there. Check it out.
If you need any more help, post back.

TS3694 My Ipod is not recognized by Itunes with my Windows 8 PC. Works fine with Windows 7 PC. Device sync test says "No device found". Already performed all of the Ipod device troubleshooting including reload Itunes, stop start Ipod device, changed drive

Need help? Some of my Ipods are not recognized by Itunes with my Windows 8 PC. (Ipod Nano 4th gen and Ipod Nano 6th gen), but on my Windows 7 PC, they work fine. My Ipod 3rd gen and Ipod shuffle work both on Windows 8 and 7 PC's. On the non-working Ipods, the Device sync test says "No device found". Already performed all of the Ipod device troubleshooting including reload Itunes, stop start Ipod device, changed drive letter...
any help is appreciated. Chris4sail

Hello there, chris4sail.
The following Knowledge Base article offers up some great step-by-step instructions on troubleshooting your iPod not being recognized in iTunes:
iPod not recognized in My Computer and in iTunes for Windows
http://support.apple.com/kb/ts1369
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

My lightroom 4 will not import my files from my compact flash card . It has been working for years with out fail but now there is no import previews and it says the files are not recognized by raw format support in LR

I have lightroom 4 I've had it for years and it has imported my raw files from my CF card without issue . Now when I plug in my CF card to import new files it says import operations not performed and there are no image previews . When I continue by hitting "import" I get a pop up window that states "the files are not recognized by raw format support in Light Room"

Don't feel too bad. If the D4S has as many menus and custom functions as my Canon 5D Mark iii its easy to get messed up.
If you downloaded from the link I gave you it will be Lr 5.4. The link was just to show you when the D4S was supported. The newest version is 5.7.1 and can be downloaded here. Don't know your OS so you will have to pick Windows or Mac. Product updates
On my Mac I just run the downloaded installer program (its a full version and not an small update) and it installs the new version and erases the old version. If you are on Windows you will have to get help from a windows person.

Just purchased Nikon D610. tried to import 3 images and got this message: The files are not recognized by the raw format support in Lightroom. How do I fix this frustrating problem. Have been using Lightroom for years also Nikon products without any prior

How do I import images. Have a message that says: The files are not recognized by the raw format suppot in Lightroom. Am using a Mac version 10.9.4. the import is from a new Nikon D610. Am using LR 4.4 Please help Adobe is useless as a support.

Each camera must be supported explicity and your LR version is years older than your camera.
According to Adobe's Camera-support page, you need at least LR 5.3 to work with your D610 NEFs in LR:
Camera Raw plug-in | Supported cameras
If you don't want to upgrade to LR 5, or can't due to your OS being too old, then it might work to use the latest DNG Converter and create DNGs from your NEFs, which should open in LR 4.x. You can find the DNG Converter here: http://www.adobe.com/downloads/updates

You are not recognized as a user in the SAP customer notification system

Hello,
we are in OSS registered as CCC. I am able to send notifications from our SolMan to OSS with components(instalations) which are registered under out SAP customer number(our SolMan instalation etc.).
When I want to sned notification for our customers to OSS but with component of our customer(he has another SAP number, his instalation) then I got an error message
You are not recognized as a user in the SAP customer notification system:
You are not recognized as a user in the SAP customer notification system
Message no. DNO158
Diagnosis
No address data exists for this logon user in the SAP problem notification system.
The function you activated could not be executed.
Activated function Diagnosis
Send notification to SAP The notification was saved, but could
not be sent to SAP.
Update notification at SAP The notification was not updated to
reflect the SAP version.
Check for changes The system cannot compare the notification
with the current version at SAP.
Request list of the The notifications that you sent to SAP
notifications contained cannot be updated.
in the SAP problem notification system.
Procedure
Contact your system administrators.
Could you help me please?
view V_AISAPCUSTNOS ist filled with our customer numbers, I am in AISUSER...
Thanks Miloslav Pudil

Hello Miloslav,
We have the same problem.
Somebody knows how can we resolve this?
Thanks,
Diego.

Im running lightroom 4 and just purchased the Sony A7 and using its sd card. when I tried to load the photos, I got a message "the files are not recognized by the raw format support in lightroom"

Tried loading my raw files shot w my new Sony a7 and its sd card into lightroom4. Got a message: "The files are not recognized by the raw format in lightroom"
Does Lightroom 4 not work with the Sony A7?
Thanks,

Lightroom 4 cannot read the RAW photos from a Sony A7
You would have to download and install the FREE Adobe DNG Converter version 8.5 and then convert your RAW to DNG, and then import the DNGs into Lightroom 4
You could also purchase Lightroom 5.5, which will have the capability to read the RAWs directly.

Dvd are not recognized

Hi there
in many communities iMac users report the same problem I have, but no clear solution found so far.
My specs:
- iMac 27" (from mid 2010)
- 3.2 Ghz Intel Core i3
OS: OS X 10.9.1 (13B42)
DVD-ROM OPTIARC
DVD RW AD-5680H, Revision: 3AHB
Issue:
- Many original DVD's are not recognized anymore...since a few weeks, before almolst no DVD was rejected.
-> It seems the more DVD's I try, the less my iMac can read....
No configuration changes, I've only made the regular oficial updates coming from Apple.
Any solution ideas, but cleaning the lenses? Much apreciated!

Have you tried a lens cleaning disk. One that uses dry brushes and no liquids? Have you looked into the OS X Mavericks: Use Apple Diagnostics or Apple Hardware Test?
OT

Empty CD-Rs are not recognized

Hello,
I cannot burn empty CD-Rs, because they are not recognized. When I put an empty CD-R into my LG burner K3B tells me that no medium is inserted. CD-RWs and DVDs are working.
Any ideas? What additional information should I post?
Thanks
Albert

Some entries in system profiler:
ATA-Bus:
MATSHITADVD-R UJ-85J:
Modell: MATSHITADVD-R UJ-85J
Version: FAV1
Seriennummer:
Absteckbares Laufwerk: Nein
Protokoll: ATAPI
Einheiten-Nummer: 0
Socket-Typ: Intern
Los Power Polling: Ja
MATSHITA DVD-R UJ-85J:
Firmware-Version: FAV1
Verbindungstyp: ATAPI
Brennen möglich: Ja (Geliefert/Unterstützt von Apple)
Cache: 2048 KB
DVD lesen: Ja
Beschreibbare CD: -R, -RW
Beschreibbare DVD: -R, -RW, +R, +RW, +R DL
Schutz vor Pufferunterschreitung beim Brennen von CDs: Ja
Schutz vor Pufferunterschreitung beim Brennen von DVDs: Ja
Schreibstrategien: CD-TAO, CD-SAO, DVD-DAO
Medien: Nein
IOCDStorageFamily:
Version: 1.4
Zuletzt geändert: 29.09.06 06:19
Informationen: 1.4, Copyright © 1998-2005 Apple Computer Inc., All Rights Reserved
Ort: /System/Library/Extensions/IOCDStorageFamily.kext
kext-Version: 1.4
Lade-Adresse: 0x92a000
Gültig: Ja
Identifiziert: Ja
Abhängigkeiten: Erfüllt
Integrität: Korrekt
CDs & DVDs:
Version: 1.4
Unterstützt von: Apple
Sichtbar: Ja
ID: com.apple.preference.digihub.discs
Ort: /System/Library/PreferencePanes/DigiHubDiscs.prefPane

Why New-SPConfigurationDatabase and other commands are not recognized?

Hello Community
    In Sharepoint 2013 Server I am an Administrator and in
SQL Server 2012 I am a securityadmin, db_owner and sysadmin. In the
I am also a domain user and domain administrator.
    Below is what is returned from the Powershell command I entered:
PS C:\> $PSVersionTable.psversion
Major Minor Build Revision
3      0      -1     -1
    I am running WS2012 and the prerequisites for Sharepoint 2013 Server have been installed.
    However when I run the Powershell script to configure the
New-SharepointFarm the command fails with all of the Powershell
commands returning the following error message:
PS C:\scripts> .\New-SharePointFarm.ps1
Configure Database
New-SPConfigurationDatabase : The term 'New-SPConfigurationDatabase' is not recognized as the name of a cmdlet,
function, script file, or operable program. Check the spelling of the name, or if a path was included, verify that the
path is correct and try again.
At C:\scripts\New-SharePointFarm.ps1:20 char:1
+ New-SPConfigurationDatabase -DatabaseName $ConfigDB -DatabaseServer $DatabaseSer ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~
    + CategoryInfo          : ObjectNotFound: (New-SPConfigurationDatabase:String) [], CommandNotFoundException
    + FullyQualifiedErrorId : CommandNotFoundException
    As you can see the error says: "The term 'New-SPConfigurationDatabase' is not recognized as the name of a cmdlet"
but as you can see $PSVersionTable.psversion shows the Powershell version I am using so my question is:
    How come when I run commands like "New-SPConfigurationDatabase" they are not recognized?
    Thank you
    Shabeaut

Hello Alex
    I should have included that while troubleshooting I did that too.
The results of "Add-PSSnapin Microsoft.SharePoint.PowerShell" were:
        Add-PSSnapin : No snap-ins have been registered for Windows PowerShell version 3
    and if I try to run .\New-SharePointFarm.ps1 again I get the same error:
        The term 'New-SPConfigurationDatabase' is not recognized as the name of a cmdlet,
    Shabeaut

Canon 7D Mark II error "Files are not recognized by the raw format support in Light (149)"?

Has anyone tried to load raw files from a Canon 7D Mark II I get an error "Files are not recognized by the raw format support in Light (149)"?

Based on previous experience, I expect the final versions of LR, ACR and DNGC to be released simultaneously. We have so far seen Release Candidates of ACR and DNGC but not LR.
Unless there needs to be a second ACR/DNGC Release Candidate which happens once every few years for special circumstances, which I don't see any of at the moment.

Why iPhone 4s and iPad 2 mini are not recognized by iTune.

I have and iPhone 4s and a iPad 2 mini who have been upgraded to iOS 7.1.1 both and now that i want to sync them to my computer who is running windows 7 premium family edition, they are not recognized. I get this when i plug in my phone or pad ( this iPhone cannot be used because the required software is not installed. Run the iTunes installer to remove iTunes, then install the 64-bit version of iTunes). I have done that twice and nothing is happening getting frustrated please help....

See the troubleshooting tips in:iOS: Device not recognized in iTunes for Windows
Also see:Troubleshooting issues with iTunes for Windows updates

Adobe products are not recognized in my Internet Explorer 10 on my Win 7 64B professional

Adobe products are not recognized with my Internet Explorer. I cannot open PDF documents on websites and I cannot play MSN games since Flash Player is not found. I have tried manage add-ons and enable status without success. Can anyone supply detailed information on how to fix this problem?
C-adobe

Are you running IE10 in 64-bit mode? The Adobe Reader plugin is 32-bit, and can only run on a 32-bit browser.
Regarding Flash Player, do you have ActiveX Filtering enabled? Disable it.

My ipod shuffle and nano are not recognized by itunes 12

My ipod shuffle (4th generation) and my ipod nano (2013) are not recognized in itunes 12. I have windows vista and have tried all of the troubleshooting suggestions to no success. How can i fix this?

Hi DMG1946,
I'm sorry to hear you are having issues with your iPod shuffle after a recent update. If your iPod shuffle isn't being recognized in iTunes, but is showing up on your Mac, you may find the troubleshooting steps outlined in the following article helpful:
iPod shuffle troubleshooting and service FAQ - Apple Support
If necessary, you may also need to use one or both of the following procedures to reset your iPod shuffle:
Resetting iPod shuffle - Apple Support
About iPod Reset Utility - Apple Support
Sincerely,
- Brenden

Outlook 2010 or earlier versions are not recognized in PSE 9 under Windows 7 64 Bit

Similar Messages

Maybe you are looking for