Outlook 2010 slow after itunes update

when i uipdated my itunes today the opening of Outlook 2010 now takes a couple minutes instead of a couple seconds. i tried restoring to a backup point and redoing with the same result?? suggestions? (windows 7 home)

You're welcome!

Similar Messages

Itunes starts extremely slow after an update of windows 8.1.

Itunes starts extremely slow after an update of windows 8.1.
It takes up to 10 minutus.
If I see the appliction log in event viewer then I see the following errors on the Bonjour service.
For instance:
Client application bug: DNSServiceResolve(a8:fa:d8:3a:1e:8f@fe80::aafa:d8ff:fe3a:1e8f._apple-mobdev2._t cp.local.) active for over two minutes. This places considerable burden on the network.
followed by
SendWakeupPacket error: sent -1 bytes: 10065
What can this be?
Already thanks,
John

I did all the step with save mode and that didn't gave the same result.
Then I created a new account and there itunes started up normally.
So I contued with the user section.
I removed the itunes directory from
c:\Users\username\AppData\Local\Apple Computer\iTunes
This gave the same result in not starting up.
Then I removed the itunes directory from
c:\Users\username\AppData\Roaming\Apple Computer\iTunes
The a popup appears that the Bonjour Service has been disabled.
I looked in services and saw that is was still running.
But I tried to restart this service and it took a long time to stop this service.
Even if I selected restart the Bonjour Service didn't start.
Manually starting was not a problem.
Clicking OK on the popup let itunes start quickly. And closing and starting it again was also quickly.
So Matt thanks for your answer.
If it happens again I have to see if it was the removing of the itunes directory from roaming or restarting the Bonjour Service.

Outlook 2010 (Exchange) after iCloud installation hangs

Hi there,
i have Outlook and use it with a Exchange Connection. I installed the iCloud Software for Windows to Sync with Outlook. But after a while Outlook hang at the start. I tried many things Office repair, icloud Software repair and reinstallation nothing changed. But if i deinstall the iCloud Softwar everthing works well.
Wehen i start Outlook with installed iCloud Software in Safemode it runs, but i get no reminder from iCloud Tasks/Events. And i get a messe to put a SmartCard in!??? After i click on Aboard i can Work with Outlook.
Can somebody help me!?
Matthias Berndt

Sorry to drag up an old thread, but I have exactly the same problem. And after countless searching on these forums and the internet this is the closest I have seen to my problem.
My devices:
Home: PC, Windows 7 64-bit. Outlook 2010 with SP1, all updated with MS service packs and hotfixes.
I converted [some time ago] all my home/personal contacts to iCloud. I'm fine with that.
iPhone4: syncs contacts with iCloud
iPad2: syncs contacts with iCloud
iTunes shows that contacts are being syncd with iCloud and NOT itunes.
Everything is syncing just fine.
BUT....
I would like to see my iCloud contacts, using Outlook 2010 (connecting to Corporate Exchange Server) using my work laptop.
Just to be clear, I don't want to sync my contacts between Exchange and iCloud, I'm quite happy to keep work contacts in Exchange and personal contacts in iCloud. All I want to do is see iCloud - Contacts in Outlook on my work laptop.
Firstly, I made a backup of the contacts in corporate Outlook, then manually deleted them from within Outlook. I did this to avoid the iCloud applet from attempting to copy/merg contacts from Outlook/Exchange into iCloud - potentially causing duplicates.
I then installed the iCloud Control Panel applet successfully, signed in with my Apple ID. All looks good so far.
I then fired up Outlook 2010 on the laptop....which just sits there displaying the splash screen and doesn't load up the main application window.
Cancelled the process.
Uninstalled iCloud applet.
Started Outlook again on the laptop, application works fine.
I have read the Apple article on Exchange and iCloud...and I don't believe I am doing anything different to what the expected functionality should be. i.e. it should be possible to run Outlook connecting to Exchange, and have iCloud connectivity too, yet of course both sync to their respective servers.
Any advice or help?

Everything is so slow after I updated to 10.7.2...Help:(

I have a Macbook pro 15''.. Bought this Aug.
Everything is so slow after I updated to 10.7.2 .....
Especially now it takes me 1 min to turn on my laptop... which used need only 10 sec. So does Turn off...before update it is 2 sec, now it is 30 sec...
What should I do to make it faster?
Thanks.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software -- potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions -- they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
Below are four lines of text in monospaced type, which are UNIX shell commands. They’re harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of running these commands, search this site for other discussions in which they’ve been used without any report of ill effects.
Some of the commands will line-wrap in your browser, but each one is really just a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then either copy or drag it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
To begin, launch the Terminal application; e.g., by entering the first few letters of its name in a Spotlight search.
Step 1
Copy or drag -- do not type -- the line below into the Terminal window, then press return:
kextstat -kl | awk ' !/apple/ { print $6 $7 } '
Post the lines of output (if any) that appear below what you just entered (the text, please, not a screenshot.)
Step 2
Repeat with this line:
sudo launchctl list | sed 1d | awk ' !/0x|apple|com\.vix|edu\.|org\./ { print $3 } '
This time, you'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. You don't need to post the warning.
Step 3
launchctl list | sed 1d | awk ' !/0x|apple|edu\.|org\./ { print $3 } '
Step 4
ls -1A {,/}Library/{Ad,Compon,Ex,Fram,In,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Sta}* 2> /dev/null
Important: If you synchronize with a MobileMe account, your me.com email address may appear in the output of the above command. If so, change it to something like “[email protected]” before posting.
Remember, this is all drag-and-drop or copy-and-paste, whichever you prefer -- no typing, except your password.
You can then quit Terminal.

HT4061 My gateway PC is locked up after itunes update. When i restarted the computer for the hangers to take effect. Now my pc is locked up. It gives me a client Mac address and no boot file name received. What happened, and how do I get my pc back?

jute way pc locked up after iTunes update. It says client Mac address 001320 be ad 25 . PXE E53 No boot file name received
pXE MOF. Exiting Broadcom PXE. ROM . How do I unlock my pc?

jute way pc locked up after iTunes update. It says client Mac address 001320 be ad 25 . PXE E53 No boot file name received
pXE MOF. Exiting Broadcom PXE. ROM . How do I unlock my pc?

Error code after itunes update -42404

error code after itunes update -42404 cannot connect to ipad it is telling me to restore ipad, and cannot connect to store...
Message was edited by: CFC.Steve

I assume you updated itunes on your computer. PC or Mac?
Look at the posts in the More Like This area to the right side of this page.
Update and restore alert messages on iPhone, iPad, and iPod touch
http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694
 Cheers, Tom

Links to songs lost after iTunes updates

Hi everyone,
I seem to have to have two recurring problems with iTunes.
1. After iTunes updates, I seem to lose the link to numerous songs. When I click on them, I get the little exclamation mark and a window asking if I want to locate the song manually in the library. This time around, I've got over 1500 songs in this boat. I can't locate them all manually. Each time I find one, it asks if I want iTunes to look for others. I click OK, but then it says it can't find any more.
2. I have a lot of duplicate songs. The software seems to duplicate them itself. One of the versions will have the little exclamation mark beside it, the other will work. Is there a way to bulk clean this up? It is a rather lengthy process otherwise.
Is anyone else having these types of problems?
Thanks
Orest

Can't answer your issue because I don't use itunes to organize my music(MP3). I use the Finder. I do move my MP3 files to my 5 Macs and get the job done in a few minutes with never a problem.
I rip music, then pick my favorite songs. I delete the track number(working with a copy of the original MP3) and place my 2,160 MP3 files into a folder of my choice name. I leave my other "untouched" original MP3 in an archive on either a firewire drive or another sata internal drive for safe keeping.
Now I have a folder called whatever containing many folders such as rock, metal, jazz, etc...inside those folder of course would be organized by artist folder, album folder then the music.
When I re-do my Macs I just copy my favorites folder over to it. Launch itunes then add to the library(just select the top folder and it adds everything inside). I did id3 tag my favorites originally and also used GROUPING to then have a way to sort all the songs instantly, select all and choose the equalizer. I name my playlist the same name as GROUPING name to make it simple to transfer my favorite into each playlist.
Lots of typing here but infinitely easier to work with my huge collection of MP3 files.

After iTunes update, iTunes.exe System Error - msvcr80.dll missing & icudt49.dll missing.

After iTunes update, iTunes.exe System Error - msvcr80.dll missing. Followed the support suggestion & uninstalled then re-installed iTunes 5 times & still no good so followed Apples advice & uninstalled again then went into programme files & manually deleted the files re-installed again & now getting iTunes.exe System Error - icudt49.dll missing. I give up, anyone out there help ?

I've just (finally) managed to fix this problem today. I checked the Apple Support forums, and it seems a lot of people are having the same problem.
I rang the Apple Support line, and the very helpful man (thanks Alan!) talked me through it stage by stage. If you go to the following page on the internet:http://support.apple.com/kb/TS5376 it takes you through the process. WARNING - it takes a little time! The main purpose of this is to remove any trace of the old version of iTunes from your computer...
Basically, the first thing you have to do is go to your Program Files and double click on your iTunes folder. There'll be a number of files with the suffix .dll - you need to move all the .dll files from that folder to your desktop - you can simply click and drag them on the desktop..
Next, uninstall iTunes - go to Control Panel / Add/Rempve Programs and when the list comes up remove iTunes. This will take a few minutes... Then reboot your computer.
Next, go back to Control Panel / Add Remove and Remove - IN THIS ORDER -
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support
Reboot again!
Next, check in your Program Files that the iTunes folder is completely gone - if it has, great: if it hasn't, right-click on the folder and press Shift and Delete - it will say "Are you sure you want to completely remove the folder "iTunes"? Click on "Yes".
Reboot!
Then go to the iTunes download page and voila! It should download iTunes without any problems... well it did for me.... Good luck!

Instant crash after iTunes update 11.1.2

instant crash after iTunes update 11.1.2 when opening itunes pages open then crashes, also error code before crash and still after -45054 also have multiple librarys which could be the gremlins

I am having exactly the same problem with my iPod Touch after updating iTunes. I purchased a new album earlier and when I go to 'On this iPod' the entire album is greyed out and there are dotted circles next to each song. Has anyone got a solution to this?

Blackberry Z10 became extremely slow after OS update to version 10.3.1.2243

Hi,
My Blackberry Z10 became extremely slow after OS update to version 10.3.1.2243. For example it sends text message 10-15 seconds after send button has been hit.
Can not answer the phone when a caller is calling (answer slide interface is unrespnsovie), if I want to launch any application screen turns black and nothing happens, etc.
Does anyone experience similar issues?
Thank you.
Michal.

Hi and Welcome to the Community!
A quick read of this site will answer your final question quite clearly. The "fix" depends on several factors, but given what you describe I recommend you immediately update, via AutoLoader, to the most recent version (.2582)...some of the prior versions contain some particularly challenging issues, which are reported to be fixed in this version.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

I keep getting a msvcr80.dll error after iTunes update failed?

I keep getting a msvcr80.dll error after iTunes update failed?

Seems the base of the problem is the update installation does not change the libraries but the software wants to see them changed. So the user has to go clear out all software that shares the libraries and then install the full version so they are rebuilt properly.

Exchange 2010 - Issues after rollup update installation.

Exchange 2010 - Issues after rollup update installation.
We are having issues since we installed SP3 Rollup updates 1, 2, 3, and 4.
Issue1 - People get an error messages constantly popping up when they access our webmail. The error messages are:
An unexpected error occurred and your request couldn't be handled. and
Your network connection is unavailable. Please reconnect and try again.
Issue2 - When I open the Exchange Management Shell I get the following error:
Failed to connect to an Exchange server in the current site. Enter the server FQDN where you want to connect.
Issue3 - We have been using third party software to filter spam email. It is installed on our Exchange server. Since the updates it has not been working and we have tons of spam coming through. I dont think that this issue is that important at the moment and
hope that it will be fixed after resolving issues 1 and 2.
We uninstalled all four rollup updates in hopes that everything would go back to normal but it hasnt. We still have the same issues.
Currently we are running Exchange 2010 SP3 on 2008R2 SP1.
Please help.
Thanks.
Greg

Hi,
Based on the description, you got the error below when you tried to accessed OWA after rollup update installation.
"An unexpected error occurred and your request couldn't be handled, and Your network connection is unavailable. Please reconnect and try again."
For this issue, I recommend you check the OWA virtual directory to see if "Redirect requests to this destination" is checked. If it is checked, please uncheck the option. Then please restart IIS service to check the result.
Open IIS Manager -> owa -> HTTP Redirect -> uncheck "Redirect requests to this destination:"
Best regards,
Belinda
Belinda Ma
TechNet Community Support

Outlook won't close after iTunes update

Any one else notice this after the last iTunes / Quicktime update?
After the most recent iTunes update, Outlook 2003 will no longer close completely. It stays active in the systray (that's the bottom right of the screen with the time) even though it's been closed appropriately.
The reason this is a problem is the following:
- Outlook continues to pull mail off the POP server. My wife's iphone never sees new email because it's already been pulled by Outlook.
The workaround is to log completely off of that windows account so Outlook is forced to close. (There are several other workarounds, but that one is easy...)
Any ideas?

I'm having a similar problem - since I updated to iTunes 10, my Outlook 2007 just isn't working properly. When I close Outlook, it doesn't compeltely close. Like you, I have the grey Outlook icon in the status bar and have to close it (which probably isn't doing wonders for the .pst file) Disabling the Change Notifier doesn't seem to make any difference. Also when I actually have Outlook open, my messages are not being sent or received correctly - it seems to just sit there saying receiving message X of X and doesn't do anything else.

Outlook 2010 slow(4-5 minutes) to update folders on first open every morning

Recently migrated to Exchange 2013 and now Outlook 2010 clients, when first opened in the morning will not update folders for 4-5 minutes. If, after opening Outlook you close it and then open it again, the folders up and all is fine until they close
outlook at the end of the day. The next morning, same problem. Anyone see this before?We deployed Exchange 2013 CU3, then last week updated to SP1. I'm not sure that this issue existed before SP1.Another issue is if you
go into account settings and select more setting, you receive a pop up window stating "The action cannot be completed" and if you select OK, then everything is fine and you can see all the settings.
Just wondering if anyone else has seen this.
Thanks

Yes. Same issue with Outlook 2013 as well. I found the problem to be public folders.
They were not used on Exchange 2007, so once all the mailboxes were migrated to Exchange 2013, I removed Exchange 2007 and then shutdown the old server. The problem was that the Exchange 2013 databases were set to look at the Exchange 2007 Public folder
Store which now does not exist.
I had to remove it with ADSIEdit
CN=Services -> CN=Microsoft Exchange -> CN=(your organization name) -> CN=Administrative Groups -> CN=Exchange Administrative Group (FYDIBOHF23SPDLT) -> CN=Databases.
Right-click the mailbox database you want to remove the default public folder database from and choose
Properties
Scroll down until you find the msExchHomePublicMDB attribute. Highlight it and then click
Edit
Click the Clear button so that the value changes to “not set”.
Hope this will save someone some time in the future.

Outlook 2010 crashing after bunch of windows updates on this tuesday

There were a ton of office 2010 patches released this tuesday and after that we are noticing that Outlook is crashing a lot.
Disabling addins helps for a while, but it crashes all the time.
We have Exchange 2010 and yes it even crashes in safe mode.
How can we diagnose the issue.
konkani

Hi Konkani,
Actually, we've seen some other reports that a recent Outlook 2010 update (KB 2956128) will cause Outlook 2010 not working properly, but the symptoms are various.
We would like to collect more information for further investigation. Could you please provide your detailed system info?
Also, Could you please have a check and send us the log files? You can send the log files to this email account:
[email protected] and inform us here (the email subject should be the link of this thread).
Your kind assistance on this are very much appreciated.
Regards,
Ethan Hua
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click
here

Outlook 2010 slow after itunes update

Similar Messages

Maybe you are looking for