Outlook 2010 when deleting meeting attendees, not prompting to send to added/deleted attendees

Hello,
We have been having this issue for quite some time and I have endlessly searched the internet for answers as well as this forum but it doesn't seem like anyone has been able to help.
We are using Outlook 2010 and I have two employees who need to modify very large meeting invites, quite frequently. When they add an attendee to a meeting invite and click Send, it prompts them with the dialog box to send to only added/deleted attendees
or send to all attendees. When they delete an attendee and click Send, it does not prompt them with this dialog box and just sends to all on the invite. They are not modifying anything else within the invite, only deleting an attendee and we would like
to send to that attendee only. This is a major issue because these invites consist of anywhere from 30 - 75 Client (customer) attendees and it not only looks bad on our part, they start to get confused and annoyed when this continually happens.
Can someone PLEASE PLEASE HELP ASAP??? It does not appear that there is a solution out there for this issue.
Thanks in advance,
Lori

This is an interesting problem. You can go in to the Tracking area under the scheduling assistant and un-check anyone who has been deleted from the invitation list. When you save the meeting, it will ask if you want to send an update. However, it still does
not give the option of sending only to added or deleted participants. I just tried it and it did not send me an update after I deleted people on the invited list.
I hope this helps.

Similar Messages

Outlook 2010 supported by BT or not?

I have not been able to send or receive emails all today 21st November. I have read elsewhere about a cable cutting issue and assumed I was a victim of this. I could not help phoning BT to ask about progress. When I said I cannot receive or send emails through Outlook 2010 but I am able to receive my BT yahoo emails via the webmail, I was told that BT do not support Outlook anymore, and I should use the webmail until "everyone is moved to BTmail". Has anyone else been told that Outlook is no longer supported?
If I can receive my BT yahoo emails through the webmail does that mean I am not affected by the "cable cutting". Or was that a red herring from BT?

Yes I now appreciate that point about BT and Outlook 2010 and that no advice is offered for any 3rd party email program. Unfortunately the lady said my problems were entirely related to Outlook 2010 and that I should not be using it. She advised me to use the BT Yahoo webmail service for emails "until everyone is moved to the new BTmail". When that might be was not forthcoming. 30 minutes after my conversation with BT, all my emails came pouring in via Outlook 2010. It is still working but what the problem was which lasted most of 21st November I may never know.

Outlook 2010 - Updates To Meeting Not Reflecting on Invitee's Calendar

Hello -
Our environment is Exchange 2007 with Outlook 2010 client. Our executive assistant has full access permissions to our CEO's Exchange account and handles the calendar among other things. For some reason, when she creates a calendar event then makes changes
to it or deletes it, the changes do not reflect on the calendars of the invitees. I verified that she is following the correct steps to create/update events but the problem persists for some recipients; not all.
If someone could offer some guidance about what might be root cause, I would greatly appreciate it.

Hi,
According to your description, I understand that the meeting updates which is sent by the user who has full access permission to CEO’s mailbox can’t update some attendees’ calendars.
Please check whether there is any user using third-party devices to manage Calendar. If it is, please disable it. We can try to remove full access permission to CEO’s mailbox and add it back to have a try. If it fails, please consider to add the executive
assistant as a delegate for CEO. To do it, please following these steps:
1. Open Outlook in CEO’s computer, click File > Account Settings > Delegate Access.
2. Click Add to select the assistant, and Delegate Permissions for assistant window appears.
3. CEO can set folder permission for assistant and check “Delegate receive copies of meeting-related messages send to me”.
4. Click OK to finish settings.
Then check whether the issue persists.
Regards,
Winnie Liang
TechNet Community Support

Outlook 2010 -Mailbox Cleanup wizard does not start when using cached mode

We are using Outlook 2010 with Exchange 2003 server.
Currently all users are using online mode, but for some problem, I need to persuade the users to change to use cached mode.
Recently we find that when user
mailbox reaches its size limit and try to send an email message in Outlook 2010 that is in cached mode, the email message stays in the
Outbox and the Mailbox Cleanup wizard does not start. It just prompts
for "send and receive error". As most of the user would not look for what the error is referring and just call IT to fix. Even worst is, they didn't realize that the mail is still in outbox.
I find the KB2544027 describing this issue but was not available and suggest to install 2596485.
http://support.microsoft.com/kb/2544027/en-us
I've try to install the hotfix and install Office 2010 SP2 but just doesn't work.
Does anyone know how can I fix it?
Thanks!

Hi,
Based on my research from the internal resource, this issue has been fixed in build 14.0.6126.5000 or less. I suppose that the hotfix not available because it has been involved in the release.
I’d like to confirm your Office 2010 build number so that we can conduct a deeper analysis on this issue.
In addition, make sure you have installed the latest update for Office 2010.
Best Regards,
Steve Fan
TechNet Community Support

OUTLOOK 2010 TROUBLE AND I DO NOT want a yahoo acount

I get the bad password or user name when I follow your direction to the letter! Several other post with this issue. Somehow att indicates yahoo is at fault. and that an account should be created with yahoo???? I payy ATT I want to deal with ATT and do not want a yahoo account.Please give me strait forward direction on how to setup outlook 2010, THAT ACTAULLY WORK!!!!!!@!@tHANKS A BUNCH I HAVE BETTER THING TO DO WITH MY SUNDAY bad new costumer experience!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! sHOULD NOT BE THIS HARDMY ROAD RUNNER ACCOUNT WORKS FINE,

UserA, sometimes you have to log in here: https://att.yahoo.com/ with your credentials and then log in here: https://www.yahoo.com/
This will sync up both accounts. Then try outlook and see if it works.

Outlook 2010 paste from other programs not working.

Hi,
Win 7 SP1 x86 w latest patches. Win lang. ENG
Outlook 2010 SP1 x86 w latest patches. Office lang. ENG
Regional (date/time and so on) settings EE (Estonia)
I have about 6 users with same conditions.
When I'm trying to copy - paste from other programs like IE9, Word, Excel I'm unable to paste into Outlook message body.
It just wont paste.
Typically, Outlook shows me "thniking circle" for a millisecond or rarely just hangs.
There are some exceptions:
1. I'm able to paste into To: field
2. I'm able to paste into Subject: field
3. I'm able to paste even into body if I copied text from Notepad.
4. I'm able to paste into body when I copied text from another email.
Additional information:
Outlook default message format "Plain text" (Rich text, HTML - does'nt matter)
What I'v tried so far and results:
1. Repair Office installation trough "Programs and features" - NO LUCK
2. Changed default paste behaviour from other programs to "keep text only" - NO LUCK
3. Used SAFE MODE - this helps, paste SEEMS WORKING correctly. Based on my knowledge, SAFE mode mainly disables Add-ins. OK.
Disabled all Add-ins in normal mode so Outlook shows that "No Active Application Add-Ins" - NO LUCK
So, I'm out of ideas. I think that this problem starts after installing Office 2010 SP1
I don't want to uninstall SP1 because for me it's not a solution (SP1 won't dissapear from the list of updates), ok.. agree, it may be
temporary solution but at the end of the day, there must be something else.
Any ideas?
rgds Sven

Rename normailemail.dotm to .old when Outlook is closed and see if it works now.
You can find the file here;
C:\Users\%username%\AppData\Roaming\Microsoft\Templates
Robert Sparnaaij
[MVP-Outlook]
Outlook guides and more: HowTo-Outlook.com
Outlook Quick Tips: MSOutlook.info
Thanx, NormalEmail.dotm did not do anything for me but the renaming the Normal.dotm in the same folder did the trick for me. I can paste links again into outlook :)
Win7 SP1 and Outlook 2010 32bit

HT1386 iphone 4 with outlook 2010. The sync does NOT sync all of info such as some Notes and some contacts. Any advice please?

When Syncing iPhone with iTunes with Outlook 2010 with Wiindows7 not all of the information is sysnchronized. e.g. Outlook Notes shows 8 more entries than iPhone. Any help would be appreciated. Sync is done by direct cable connection.

I finally found a solution that worked.
I installed the App "Group SMS" from the App Store. Then I created a new group. Then I added all my addresses manually one by one. And when I then synchronize - all my contacts appeared again in Outlook.

Outlook 2010 Calendar new appointments do not appear on BB Curve 9300

I have my BB 9300 connected to BIS and I can see all of my contacts synchronized from my office Outlook 2010 but not the Calendar items. It seems thwy are canceled if they are older than 2 weeks appr.tly. What should I do to keep all my calendar Items in my phone too? Thank you for helping.

Anybody could help me? Thank you very much.

Outlook 2010 show all users presence not just those you added to Jabber?

A customer has requested that in Outlook 2010 that Presence state is show for all users. Not just those that have been added to their Jabber for Windows 9.7.1 client.
Is there any way to do this?
J4W 9.7.1
IMP 10.0.1SU1

So for all users in consideration; kindly check if the proxy address field in AD is populated with the following format or not;
SIP:uid@sipproxydomainname ... ( this is also the IM address and please note prefixing with the word SIP: is really important).
Note this field will ensure whether you get the presence consistently or not. Refer to the following document for more information;
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/jabber/Windows/9_7/JABW_BK_C4C679C9_00_cisco-jabber-for-windows-97/JABW_BK_C4C679C9_00_cisco-jabber-for-windows-97_chapter_01.html#JABW_TK_E83CC0F0_00
Here is the section that you may want to refer to; "Enable Presence Integration with Microsoft Outlook"
Please rate if you find this helpfull.

Does Microsoft Sync work with Windows 7 64 bit Outlook 2010 when you connect via Bluetooth?

I was using Microsoft Sync and connecting to my laptop using the sync cable when I was running a 32 bit OS and Windows Vista. I just got my new laptop and it has Outlook 2010 running on Windows 7 64 bit. I've read it'll still work using bluetooth to connect vs the ync cable. Has anyone been successful doing it that way? I have a 700W treo.
Thanks,
Bob

Nope. The printer now appears in the list, but I can't print to it. The port is shown as:

Outlook 2010 or earlier versions are not recognized in PSE 9 under Windows 7 64 Bit

Hello, is there any info available "to convince" Photoshop Elements to recognize a installed Outlook 2010 and to work with Outlook 2010 in a WIN 7 64 Bit system?
In my Photoshop elements 7 and 9 versions it is not possible withinPSE 9 or PSE 7 under windows 7 64 Bit to select Outlook as a valid parameter under the otion settings within Elements to handle emails functions within PSE properly.....

Yep. I agree with the above comments. Other users have reported issues while working with outlook 64 bit. Here is one such discussion http://forums.adobe.com/message/3289324 .
Thanks

Problems with contacts in Microsoft Outlook 2010, when sending emails to a contact from Outlooks adressbook

Hi!
I can´t send any email directly from Contacts in My Microsoft Outlook 2010 Swedish 32 bit version (Computer has Windows 7 professional 64 bit Swedish system).
When I type the email address directly in the field all functions well.
When I take the mailaddress from Contact its looks like:
Firstname surename ([email protected])
I Think it has the wrong format
Earlier the adress from Contacts was
Firstname Surename <[email protected]>
How can I make the Contacts addressbok back to the earlier format?
I hope someone has an answer to my problem!
Greetings
Sixten

Hi,
Any symptoms when you can't send emails from Contacts? Any error message?
Based on my research, Firstname Surname <[email protected]> is specific to the contacts in Global Address List (GAL), while for other contacts in Outlook Address Book, it displays as Firstname surname ([email protected]).
If a contact is stored in both GAL and Outlook Address Book, it follows the rule in GAL which means it displays as Firstname Surname <[email protected]>.
You may learn other information about Display the Contacts from this article below:
http://office.microsoft.com/en-001/outlook-help/display-the-contacts-list-in-last-name-first-name-format-HA010355556.aspx#_Toc260146235
Feel free to post back if you have further questions and kindly answer my questions above.
Regards,
Melon Chen
TechNet Community Support

Outlook 2010 - Can fwd form but not reply

If I send an outlook form to myself I'm able to foward it but unable to reply.
I get "You don't have appropriate permission to perform this operation" message.
In the action tab I have the same for Reply, Reply to All and Forward and all are enabled.
Any ideas ?
Thx
Matt

Hello Matt,
Please take a look at the similar forum threads:
Outlook 2010 you don’t have appropriate permission to
perform this operation.
You do not have appropriate permission
to perform this operation
Finally, I'd recommend asking
non-programming questions on the
Outlook IT Pro Discussions or
Microsoft Answers forums.

HT4759 So I moved my contacts and calendars to icloud. THEN I find out that 2010 outlook is not supported--so how do I get all of my contacts and groups back into OUtlook 2010. It had better not be one at a time.

I moved my contacts and groups as well as calendars to icloud. Nor I can't use them in outlook 2010--which I now know is not supported--how do I reverse what I have done?

Outlook 2010 is supported, as is 2007.

Multiple emails in outlook 2010 with pdf attachments will not print

Here is our issue
1. Select multiple emails in outlook 2010 with pdf attachments (versie 10.0.1)
2. Go to file -> Print
3. Select Print Options. Check the box for Print Attached Files
4. click Print The emails will print but only the first attachment will print.
After that we recieve the following error
There was an error opening this document. The selected file cannot be found.
We have tried turning off enhanced security mode but still get the same result

You can also extract these pdf attachments via email attachment extractor from here and then send the pdf file for printing. I think this will be easier for you to print them all.

Outlook 2010 when deleting meeting attendees, not prompting to send to added/deleted attendees

Similar Messages

Maybe you are looking for