Outlook 2010 willnot send or receive e-mail

Yesterday, Microsoft did and automatic upgrade. I am now getting this message going on the last 24 hours. " Your mailbox is currently being optimized as part of upgrading to Outlook 2010. This one time process may take up to 15 minutes and performance
may be affected while the optimization is in progress" I can not send or receive.

As of 2014-March, the same thing happening on my system. This seems to have occurred, after the latest batch of 28 patches from Microsoft Updates applied on 13-Mar-2014 and 19-Mar-2014. I have been running Outlook 2010 since it was first available.
An unhelpful error is thrown, after trying to manually perform a Send/Receive:
Not Implemented
While in Outlook 2010, clicking FILE > INFO reveals the following warnings in red:
"Upgrade in Progress. Your mailbox is currently being optimized as part of upgrade to Outlook 2010. This one time process may take over 15 minutes and performance may be affected while the optimization is in progress."
There's an "Upgrade Now" button but it fails to produce any visible result. Next to the button, another warning in red:
"You must upgrade to the latest version of Outlook Hotmail Connector to continue using this e-mail account."
Again, I do not have the Outlook Hotmail Connector installed. Nor have I recently upgraded to Outlook 2010.
I am unable to access ANY account settings, as well as poll my various mailboxes.
While reviewing the list of installed updates (Control Panel > Programs and Features > View Installed Updates), there are 28 approximate patches that were recently applied to Microsoft Office Professional Plus 2010.
Microsoft, what the #$%# is going on?

Similar Messages

Can't send or receive internal mail Outlook 2013/Exchange 2013

Working on migrating from Exchange 2010 to 2013 . When I move a mailbox to the 2013 DB I lose the ability to send or receive internal mail. OWA works fine, but no internal. If I move it back to 2010, everything runs perfect. I have
been chasing my tail and seem to be missing something. Any suggestions?
:Updated:
Host record incorrect.

Hi Doc, First of all I would recomend you to take a look to this link:
http://technet.microsoft.com/en-US/exdeploy2013/Checklist?state=2419-W-AgAEAAAAQAAAAAEAAQAAAAA%7e
It's very helpfull for migrations, take the time to review it, also, in your particulary case, I'd recommend you to redirect all the messaging throught the new Exchange 2013 CAS server, so in that case all the mails from outbound just get authenticated and
then search for each mailbox.
Your issue cames out because your moving the user to an isolate envioroment, maybe the send connectors aren't configured, have you installed the Domain Certificate? or maybe have you exported?
Luis Antonio Navarrete Aranda Consultor Senior Akros Solutions Ecuador

I have recently bought a new domain which is hosted so that I can send and receive e-mails

I have recently bought a new domain which is hosted so that I can send and receive e-mails & run a webpage. It has POP3 and SMTP settings that I can use to send and receive my e-mails via Outlook on my PC. However, it doesn't work on my iPad. I have changed port settings and appear to be able to send but each time I start the Mail application my iPad reports "username or password incorrect" even though these correctly work on my PC. MS Outlook Exchange 2010 Live Mail works OK with the same settings on my iPad but I would like to get all my mail via the iPad inbuilt application.
Can anyone help?

POP3 accounts are really designed only to be used from one computer and some email providers actually 'lock' the account while in use to stop it being used by another computer/device at the same time.
Try closing Outlook, wait some minutes then try accessing it from the iPad. You may find it works once the POP3 connection has been released.
Ideally, you should be using IMAP because POP3 is old and not suitable for modern, multi-device usage.

I cannot not send and receive e-mails

Translated with the help of Google Translate.
Mail: Version 7.3 (1878.6)
Two-step verification set
Since a number of weeks I cannot not send and receive e-mails.
And I cannot find an answer in the support community.
I suppose the cause can be found in the two-step verification or in the TLS certificate ... but in this I am a layman.
The connection wizard explanes:
iCloud IMAP Failed to log on this iCloud IMAP account. Make sure the username and password are correct
SMTP Failed to log on this SMTP account. Make sure the username and password are correct.
I'm 99.999% sure that the username and password are correct. Those missing 0.001% can be found in another problem somewhere else. Who advises me?
My settings are as follows:
[Account Information]
iCloud IMAP
E-mail: [email address] @ me.com
Incoming mail server: imap.mail.me.com
username: [email address] @ me.com
password: my iCloud account {four digits, a hyphen, five Uppercase, 1 lowercase}
server name outgoing e-mail: smtp.mail.me.com
TLS certificate
[Outgoing mail server / Edit SMTP Server List / account information]
Server Name: smtp.mail.me.com
TLS certificate
[Outgoing mail server / Edit SMTP Server List / advanced]
custom port: 587
Use SSL: yes
Authentication: Password
username: [email address] @ me.com
password: that of my iCloud account
[Advanced]
IMAP path prefix: left blank
Port: 993
Use SSL: yes
Authentication: Password
Use IDLE command: checked.
I hope I get soon an answer.
iMac (27-inch Mid 2010), OS X Mavericks (10.9.5), Mail

Troubleshooting Apple Mail
What does Mail/Window/Connection Doctor Show? If the server is red, select it and look at the Show Details box.
Troubleshooting sending and receiving email messages
Troubleshooting sending email messages

Outlook 2010 wont send emails with attachments

Hello
I was starting to write the question when we found out what the problem was. So I thought I would share our resolution in here, in case someone fall in the same issue.
One of my user with Outlook 2010 cannot send emails with attachments of some size. +-50 kb files works fine.
But when we try a file of 1mb, the mail goes in the Outbox, Exchange status swith from Connected to Disconnected and the email stay there.
The user is in a remote location, connected through VPN with the network where the Exchange 2013 server is
Here is what I did:
1. Re-create Outlook profile: wont work
2. Re-create Windows profile: wont work
3. Check ip settings: fine
4. Try in OWA: wont work
5. Look at Exchange settings for outgoing email size: 10mb
6. Load my user's Outlook profile on another LAN: works fine
That last point made me thought about a potential problem on the remote user's lan. So I did
7. Check VPN config between the remote site and IT site: fine
After googling the problem, I found that website (http://community.spiceworks.com/topic/396793-outlook-2010-client-suddenly-showing-disconnected-from-2013-exchange-server) that suggest to change the DNS setting on the client. However, the DHCP of my remote
user was the router itself, which is giving a DC as primary DNS, and ISP DNS as secondary. I changed the secondary DNS for another DC in our organization, and guess what? Voila! Problem is gone!
Thinking about it that make not much sense, as the primary DNS is always up the secondary shouldn't be queried. But that's what resolved our problem.
Hope it helps someone!
Martin

Hi Martin,
Thanks for your sharing:)
If you have any question about Microsoft Office, welcome to contact us and feel free to post your issue on Office forum.
Regards,
Winnie Liang
TechNet Community Support

Cannot send or receive yahoo mail or gmail from iPhone . installed ios 6 recently. tried rebooting the phone and deleting the email account and adding again but nothing works ! can someone suggest a solution?

cannot send or receive yahoo mail or gmail from iPhone . installed ios 6 recently. tried rebooting the phone and deleting the email account and adding again but nothing works ! can someone suggest a solution?

Not sure about yahoo, but for gmail, I done the following:
Set up using Exchange on iPhone, it'll keep prompting for password. On PC use captcha option, log in to gmail account from PC after completingg captcha option, enter password on iPhone.
See how that goes for gmail, let us know.
Hopefully someone will have fix for yahoo.

Problem with sending and receiving e-mail through exchange [GMail]

Hello I have problem with sending and receiving e-mail.
all is well set, username and password are correct, the server set m.google.com. verification of data is about like stepping into a post and want to check the post office gives me an error message: Can not Get Mail. The connection to the server has failed
I have this problem on my two iPhone

http://www.zdnet.com/google-drops-exchange-activesync-support-for-free-email-acc ounts-7000008836/

Why do I get an "unable to connect - There may be a problem with the mail server or network." message from iCloud. I have verified the settings. I can access my iCloud account online but can't send or receive e-mail via the mail account.

Text limits to the "Question" link prevents a full explanation:
This is a long-time problem. I have tried to resolve it with Apple but their "Customer Support" is merely a name.
I can go online and access my e-mail but when I try to send or receive e-mail via iCloud through my internet server (Google fiber now but the same situation existed with my prior service), I receive "There may be a problem with the mail server or network. Verify the settings for 'Apple Email' and try again.
"The server returned the error: The server 'p0-imap.mail.me.com' refused to allow a connection on port 143."
Well, I have verified the setting and tried again and again and …
Well, you get the idea …

JungleTaxi Cabbie wrote:
Csound1: iCloud: Configuring Mail with Mac OS X v10.6 or iOS 4
Enter your Incoming Mail Server, User Name, and Password using the following settings:
Incoming Mail Server: mail.me.com
User Name: Your iCloud email address (excluding @me.com)
Password: Your password
Last Modified: Jun 27, 2013
Maybe you should test these things before calling people out, because these settings do function perfectly well.
iCloud is not supported on Snow Leopard or lower, why bother to mention it?
The OP has an iCloud account, and that can not be opened without Lion or Mountain Lion (on a Mac), IOS5 or 6 (on an iPhone/iPad)
The document I linked to is Apples documentation for iCloud on current devices,I don't care whether you believe that you know better than they do, but it will affect the people who follow your advice as it won't work
JungleTaxi Cabbie wrote:
Also, if you're not running Lion or Mountain Lion, there is no "Mail, Contacts & Calendars" prefpane.
I never said that there was, perhaps you imagined it.

When I send or receive e-mail, the mail gets changed significantly from its' original form.....typestyle, size of letters, symbols, page layout, color, everything changes.....is there a way to fix that?.....

When I send or receive e-mail (Thunderbird).....the mail gets changed significantly from its original form.....typestyle, font size, symbols, page layout, color.....everything changes.....is there a way to fix that so my the original form of the mail is not changed?.....

Just to recap, this is a collection of ports I have collected over time for people who needed this information when setting up the HP ePrint app so that they could view their email from within the app. I am certain other applications also need this information. Although lengthy, I could not find a more comprehensive place to retrieve this information. Feel free to post additional information, faulty information, or other related topics below as this is simply a collection of data and it would be practically impossible to test all of them. Thank you!
Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
When a solution is found please mark the post that solves your issue.
Every problem has a solution!

I bought my iPhone in December and it has worked until today (3/15/15). Now it will not send or receive e-mail, access Yahoo Weather, or go online through Safari. I suspect that it is a Verizon problem. Any help?

I bought my iPhone in December and it has worked well until today (3/15/15). Now, I cannot send or receive e-mail, access Yahoo Weather, or go online through Safari. I suspect that it is a Verizon problem. Any help?

Did you reboot the phone by holding the home and sleep/wake buttons together at same time for 10 seconds?

Can't send or receive e-mail on EDGE network

Just recently I can't send or receive e-mail on the EDGE network - both work fine on WIFI though.
Safari and all other features work fine on EDGE and WIFI so it's an e-mail issue. I am using an IMAP account, no SSL, Incoming port 143, Outgoing port 587. After trying to connect for some time, sometimes I get a "cannot connect to server" message but usually no message at all.
I would really appreciate some advice

Am in Olympia WA for the holiday - I live in San Diego - I agree started two days ago. I spent 3 hours with Apple Support - they conferenced in ATT and they were no help. Eventually - I did a restore and did not change a thing. Am using 1.1.2.
Something happened late monday as it was fine sat - mon night. Since I do not live in WA - I assume things will be OK when I return to CA. Giving ATT a call might help - but you will definately need to get it escalated to a higher level.
I have sent this forum link to the great apple T3 support person that spent so much time with me - hopefully he will forward on to ATT and it will get resolved for all of you. Something did change on Monday night.

Send and receive e-mail

I can access the internet with WMP5AGS, but I cannot send or receive e-mail using my Comcast.net address through Outlet Express. Message says can't make a connection.

Are you using Linksys Router?
Let me know the Model number of the same .....
Becuase the issue you are facing is not related to the Adapter ..... but thereare few settings we can change on the router .....

Can I send and receive e-mails on my iPad through Verizon?

Can I send and receive e-mails on my Ipad (third generation) the same as I do on my iPhone 4s? Both are through Verizon. And if I can, where do I set it up at? Thanks.

Yes. Why couldn't you use the same email account?
Settings>Mail, Contacts, Calendars>Add Account>Other. Start there.

HT4623 Since upgrading my iPad 3 to iOS 6 I can't send or receive e mail ?

Since upgrading my iPad 3 to iOS 6 I can't send or receive e mail ?

Have you an Internet connection? If not, unplug router for a few minutes and try again. Power down your iPad and start it up again. If still no success delete the account an set it up again.

What settings do I need to use to be able to send and receive e-mails when away from home?

what settings do I need to use on an iphone4 to be able to send and receive e-mails when away from home?

Should be the standard Gmail settings, then: smtp.gmail.com
These settings will be configured automatically for you if you go to Settings > Mail, Contacts, and Calendars > Add Account > Gmail. Then enter your login info.
http://support.apple.com/kb/HT4810

Outlook 2010 willnot send or receive e-mail

Similar Messages

Maybe you are looking for