Outlook 2011: Adding some messages to "Waiting for reply" folder

My use case is that I want to track for responses on some messages I write. My methodology now is to wait for the message to be sent the move it from the sent folder to the "Waiting for reply" folder which I go over periodically.
I'm looking for a way to automate this. Best would be if I press a key which makes Outlook both send the message and put it in the Waiting folder. E.g., by using an applescript.
Alternatively, I thought that pressing a key will add me as BCC, and also add a "*WF*" string at the bottom of the message. Again, with applescript. Then when I send the message it will also arrive at my Inbox where I'll have a rule to move messages to "Waiting" if they contain "*WF*"

Hi Ryan,
I suggest double check the permission configuration.
And also check whether the reply button enabled.
Thanks

Similar Messages

Hi, i am badly in need of help. i partitioned my mac hd yesterday and now the boot camp is nt working as i was using win 7 on it. i am using macbook pro 13'' 2011. plz help me. anxiously waiting for response... specially from "Christopher"

hi, i am badly in need of help. i partitioned my mac hd yesterday and now the boot camp is nt working as i was using win 7 on it. i am using macbook pro 13'' 2011. plz help me. anxiously waiting for response... specially from "Christopher murphy"

you can't add or mofidy partition numbers. especially not if and once you have windows installed.
boot from Windows 7 DVD afterwards
but first you have to tell us and Christopher what and how you partitioned your system.
Successful setup of OS X Lion + Data Partition + Bootcamp Win7 Ult
https://discussions.apple.com/thread/3293948
So after many, many hours I think I've finally figured out how to successfully setup Mac OS X Lion on one partition, a seperate data partition, and Windows 7 Ultimate on a Bootcamp partition . Here is a screenshot of my setup on my 13" MacBook Pro
Thread with suggestions on Windows backup methods:
https://discussions.apple.com/thread/3798090
Paragon CampTune
Paragon CampTune is a commercial product that is designed expressly for this task. http://www.paragon-software.com/home/camptune/ It consists of a downloadable ISO that needs to be burned to a disc and booted from in order to resize the partitions costs US$19.95.
Securing Dual-System Configuration
Imaging is still the most affordable and robust way to secure computer data. Unfortunately Mac OS X backs up only HFS+ volumes, leaving Windows with dual-system configurations unsecured. You can permanently lose all of your data unless you have a Windows-compatible backup solution.
Paragon’s CampTune and Paragon’s Drive Copy for Mac can secure the entire dual-system configuration. CampTune creates traditional images of volumes or entire hard disks, Drive Copy can copy them to other disks. In case of an emergency, you can restore the previously created image or copy all your data back to its original state.
GParted Live
GParted Live is similar to CampTune as it is also distributed as a bootable image that needs to be copied to a CD/DVD or USB flash drive. As free and open source software, distributed under the GPL, it will always be available free. Since it has more functions than CampTune, it may be harder for folks who are not as experienced with partitioning hard drives. http://gparted.sourceforge.net/
iPartition
Coriolis Systems' iPartition is a £29.95 ($44.95 US) utility that runs in Mac OS X and allows resizing of all of the relevant partition formats, including HFS+, FAT32, and NTFS. It provides a Mac-oriented user interface that may be easier to manage than some of the free utilities. As it is not capable of resizing the boot disk, it requires a bootable external disk or a boot DVD. (A tool to create a boot DVD is included.)
Paragon Partition Manager
From the makes of CampTune is a commercial tool that is similar in functionality to GParted Live, but has a more polished/friendly user interface than GParted Live. Previously only the US$79.95 Professional version supported all the features required for this, but as of version 11 the US$39.95 Personal version has also been reported to work. http://www.paragon-software.com/home/pm-personal/
Winclone/Disk Utility
Winclone is a free tool for creating and restoring backup images of your Windows partition. One of its key features is that it can restore to a larger partition than the one the image was created from.
NOTE: Winclone has been discontinued, but for now remains available and capable of completing these tasks (including creating and restoring Windows 7 images).
Winclone updated to support Lion Winclone updates and download
Disk Utility can resize HFS+ (Mac OS) partitions, but is currently incapable of resizing NTFS partitions, so you could use it to reduce the size of the HFS+ partition and create a new larger placeholder MS-DOS (FAT) partition
The full process would be:
Backup Windows partition with Winclone.
(if the new Windows partition is smaller than the old one make sure you set the preferences in Winclone to save the image as an uncompressed dmg)
Delete old Windows partition
Resize current Mac Partition
Create new Windows partition as MS-DOS (FAT) in free space after Mac OS partition.
(If the new Windows partition is smaller than the old one an additional step is required: shrink the filesystem on the image by selecting Tools->Shrink Windows (NTFS) Filesystem)
Reboot your computer for the new Windows partition to mount properly (winclone may not restore if you don't reboot)
Restore Winclone partition over new Windows partition
An alternate Winclone based process is described in the External Guides section
Native OS utilities
MR user Kazyua reports that you can use the disk management utilities provided with the current operating systems if you want to do it manually. Windows 7 and OS X both have partition resizing functions built in. In OS X, open Disk Utility and manually shrink the mac HFS+ partition by dragging the lower right corner. Then in windows go to the start menu and type "disk management" into the search box then hit enter. You should get an overview of the drives you have and the individual partitions. Right-clicking on the partition gives an "Extend Volume" option. The Windows NTFS volume should then be extended into the free space you created with Disk Utility. This method has not worked for other users, so try at your own risk.
Resizing under VMWare Fusion
If you are looking to allocate more space to Windows under VMWare please refer to the following thread http://forums.macrumors.com/showthread.php?t=828182
From http://guides.macrumors.com/Extend/Resize_Boot_Camp_Partition
Thread with suggestions on Windows backup methods:
https://discussions.apple.com/thread/3798090

Outlook 2011 duplicates some of the contacts and don't duplicate others

Hi
why outlook 2011 duplicates some of the contacts and don't duplicate others it make them 2 then 3 then 4 and so on while for other contacts its ok ?!!!

I have the same problem before, duplication takes place maybe after or during syncing. No possible way to eliminate conflicts but to delete those duplicates manually, till I found a useful tool, the so- called Scrubly Duplicate Contacts Remover..Maybe you can use this tool too. It works very well for me. hope this helps.

HT1386 I HAVE A PROBLEM WHEN SYNC CONTACTS IN MY COMPUTER TO IPHONE 4S after update to iOS6. The message are " waiting for change to be applied".

I HAVE A PROBLEM WHEN SYNC CONTACTS IN MY COMPUTER TO IPHONE 4S after update to iOS6. The message are " waiting for change to be applied".
PLAESE advise how to solve this problem.

Hi applerinneedforhelp,
Thanks for visiting Apple Support Communities.
If iTunes is asking you to authorize the computer, and you've already done so, the troubleshooting steps in this article can help:
iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
http://support.apple.com/kb/ts1389
Regards,
Jeremy

HT4623 when turn imessage on there is a message saying waiting for activation but it doesnt change anybody knows why?

when turn imessage on there is a message saying waiting for activation but it doesnt change anybody knows why?

Hi guys,
I keep getting "waiting for activation" on my iMessage. I can only send/receive iMessage from my email address, NOT my phone number.
I have done all kind of fixing suggestions that I can find online, but nothing works so far.
- Date & time set as automatic (I don't know why this matter, but mine was already set as automatic from the begining)
- Reset network setting
- Changing the DNS to 8.8.8.8.
- Restore to factory setting (from back up & as new iPhone)
- Turning on/off iMessage & facetime
- Sign out/in of apple ID
- Change location from apple ID
- Hard reset/reboot
And many others.
...me too. I'm in Portugal having the same issue!! Hopefuly Apple will give us a solution, shortly...

TS4268 I upgraded from the 4s to the 5s on Tuesday and requested my O2 number be carried over to my new EE contract. Everything has been carried over fine but i have been unable to switch on Imessage and Facetime, Error message shows 'Waiting for Activati

I upgraded from the 4s to the 5s on Tuesday and requested my O2 number be carried over to my new EE contract. Everything has been carried over fine but i have been unable to switch on Imessage and Facetime, Error message shows 'Waiting for Activation' I've done the the resets and followed the instructions from the Apple Help page but still can't get it to switch on??

If you say you have done everything in this article: http://support.apple.com/kb/ts4268, then you should probably contact your carrier for their advice.

Experience Back Up issue, message reads "waiting for volume". Back up will not complete.

Experiencing "Back Up" issue. Regularly scheduled Back Up will not complete. Message reads "waiting for volume". What is that?

We need to know your Mac OSX version, from "About ths Mac" under your Apple menu.

Display a message without waiting for user response

Hi,
I'm currently trying to find the best way to display a message, and multiple messages to the user, so that he is informed of the processing.
I've tryied the dialog box but it's waiting for user confirmation so it interrupts the execution of the VI.
Another precision is that I call the dialog in a case structure, so does it act?
I'm thinking about using a VI dedicated to the displaying of the message but I may not be able to display multiple message boxes.
Can anyone help me to use the best way?
Thank you in advance.
Bim

You can build the message display into your vi by using the techniques shown in the attached vi (LV7.1.1)
It is just a string indicator with large font size, and using property nodes to show/hide when necessary.
- tbob
Inventor of the WORM Global
Attachments:
MessageDisplay.vi ‏31 KB

Message is "waiting for activation"

I cant send messages. In settings under message it says "waiting for activation". I can make phone calls.

iOS: Using FaceTime

I used to be able to send IMessages now it says in message settings "waiting for activation". IMessages was working until all of a sudden my phone has reverted back to sending normal SMS. I have tried lots of things but to no avail. Please. Help...

I used to be able to send I messages from my iPhone 4 now in settings it's telling me "waiting for activivation". I have tried lots of things to resolve this but to no avail. Please help....

If you are getting Siri when you double tap, then your home button must be sticking. Siri comes up when you hold the home button. Try tapping quickly twice. When that happens, the multi-tasking list comes up and you will see the app icon and then a thumbnail, or reduced size view of the app above it. You put your finger on that thumbnail and swipe upwards with your finger.
For that issue, you might want to do a reset of the phone. Hold the sleep/wake and home buttons together until you see the Apple logo and then release. The phone will reboot. This will not affect your data.
To be honest, your novel is a little difficult to read, and I think you put too much information in there, and a lot of it is unnecessary. Be to the point and just add information necessary to understand the issue.

My I message says waiting for activation

My iMessage says that it is waiting for activation
How do I make it work and not say waiting for activation?

It wont say waiting for activation once it activates. However it could be stuck doing this.
I would try the basic stuff (like toggle iMessage, sign out of iTunes app store, hard reset by pressing both power and home button, reset network settings, try activating iMessage on wifi and cell data to out rule a network issue)
You may end up having to back up your iphone to iTunes. Then, go to settings <general<reset and "erase all content and settings" (this does put your phone back to factory settings) Just so that you can go through the set up assistant again, and sign back into your apple id for imessage and face time.
You will want to choose "set up as new" when going through the set up assisant, then once all done and iMessage is active, you'll then restore from your iTunes back up.

TS1538 Trying to restore ipad 2 itunes recognizes ipad message is "waiting for ipad..." Ipad only shows apple logo.

Ipad 2 will not turn or restore. itunes recognizes ipad is in recovery/restore mode and is trying to restore ipad. Itunes has "waiting for ipad..." in the progress bar. Ipad only has apple logo on screen.
Help!!

Unable to Update or Restore
http://support.apple.com/kb/HT1808

Firefox 4.o seems to hang when loading some websites while waiting for an application called static-cdn.mozilla....

the application seems to be : static-cdn.addons.mozilla.net

From the menu bar, select
 ▹ System Preferences... ▹ Network ▹ Advanced... ▹ DNS
Under DNS Servers you should have one or more numerical addresses, such as “192.168.1.1” or “10.0.0.1”. What are those addresses?

Can i use two characteristics in heirarchy( waiting for reply from 2 days)

hello Guru's
I am working on a very non-standard PnL statement report in BI and am trying to come up with a good way to maintain it. Each line item in the PnL statement is based on different characteristics. For instance, the first line item might be a range of account numbers using 0GL_ACCOUNT . The second line item may be a particular Cost Center using 0COSTCENTER and a particular GL Account.
can i set up hierarchies on certain characteristics (0GL_ACCOUNT, 0COSTCENTER, 0COMP_CODE). Would it be somehow possible to create an entirely custom hierarchy that would use mixed characteristics to come up with each value? If this is not possible, can someone tell me that how can we handle this(query side)?
thanks,
sneha
Edited by: sneha marla on Dec 9, 2008 9:57 PM
Edited by: sneha marla on Dec 10, 2008 9:59 PM

hello Nair,
i have balances for G/L accounts Ex: 9410 G/L account has balances with cost centers 1000, 2000 and 3000. I need to restrict 9410 with cost center 1000 in hierarchy
for this i created hierarchy on 0GL_Account like. i created revenues as text node and under revenues i created acetate product as text node under this i inserted G/L account 9410. I kept 0Costcenter in external Hierarchies of 0GL_Account. by that i inserted costCenter also under Acetate product. i am not getting correct values.
can you please sugest is there any thing.
Thanks,
Sneha

I update my iphone and my phone was locked what can i do to unlock my iphone please i am waiting for reply

Respectable Apple suppot Team,
I need a help from you my problem is that recently i update my iphone software my last software version is ios 4.2 and i update with ios 6.0 through itunes,
when my iphone software was update my iphone was locked please tell me the solution who can i unlock my iphone.
I use Apple iphone 3GS 16 gb
Model No: A1303 FCC ID:BCGA1303A IC ID:579C-A1303A
Serial No: 86******YNP
Please resolve my problem i am very worry about my ipone
Regards,
Ahmad Salman.
<Edited by Host>

Sounds like your iPhone was hacked to work with other than
the original cellular provider and the update relocked the iPhone
to that provider. You must contact that provider to see if they
offer unlocking and if you qualify. Only the cellular provider to
which the iPhone is locked can unlock it.
What does it say when you look at Settings=>General=>Carrier?
Where/how did you acquire this iPhone? Who is your wireless
provider?
Not wise to post your Serial Number in the clear - I have asked
the hosts to remove it.

Outlook 2011: Adding some messages to "Waiting for reply" folder

Similar Messages

Maybe you are looking for