Outlook 2011 Connection Issue with Proxy Server after 10.8 Upgrade

Hello,
After upgrading my MBA to 10.8, my MS Outlook (Outlook Mac 2011) mail connection does not work for an exchange based mail account where a VPN/proxy server combination is involved. This was not an issue at all under 10.7. What's interesting is that it's not an issue with MS Outlook 2010 on my Parallels VM either under 10.8. There are no internet connectivity issues, I am able to connect to the internet using Safari and other browsers. Any help would be appreciated.
Thanks,
Manish

I was having a similar problem using Outlook 2011 running under Mountain Lion (10.8.2) on an MacBook Pro. When at work, behind our proxy server, I could not get Outlook to connect to a client's public Exchange server, but this worked fine without changing any settings when I was connected to our DMZ network or at home (no proxy server in these cases). My MacBook was configured to use "Auto Proxy Configuration", and Safari worked fine in all three locations (as did Apple mail)
Today, the Microsoft Office auto-updater downloaded an update, and since it was installed, the problem has been fixed and I've been able to connect to our client's external Exchange server event when behind our local proxy server (Outlook now reports that the latest installed update is 14.2.5)
Steve

Similar Messages

Outlook 2013 connection issue with exchange 2013

my exchange 2013 was upgrade from exchange 2010. after the upgrade (migration), i using outlook 2013 connect to exchange 2013. some very
weird issues happened.
when i using auto discovery to create profile and connect to exchange will success. but when i manually create the profilewill failed. the following pic for your reference. (same account, same PC)
please help, thanks lots!!!!

This is what changed in Exchange 2013. It uses RPC or HTTPs (Outlook Anywhere) and uses Server GUID to connect...
"As a result of these architectural changes, there have been some changes to client connectivity. First, RPC is no longer a supported direct access protocol. This means that all Outlook connectivity must take place using RPC over HTTP (also known as
Outlook Anywhere). At first glance, this may seem like a limitation, but it actually has some added benefits. The most obvious benefit is that there is no need to have the RPC client access service on the Client Access server. This results in the reduction
of two namespaces that would normally be required for a site-resilient solution. In addition, there is no longer any requirement to provide affinity for the RPC client access service.
Second, Outlook clients no longer connect to a server FQDN as they have done in all previous versions of Exchange. Outlook uses Autodiscover to create a new connection point comprised of mailbox GUID, @ symbol, and the domain portion of the user’s primary
SMTP address. This simple change results in a near elimination of the unwelcome message of “Your administrator has made a change to your mailbox. Please restart.” Only Outlook 2007 and higher versions are supported with Exchange 2013."
From : What's New in Exchange 2013-
http://technet.microsoft.com/library/jj150540%28EXCHG.150%29.aspx#BKMK_arch
Blog |
Get Your Exchange Powershell Tip of the Day from here

TCP Connection Issues with OPC Server and GE Versamax

Hi there,
I have an installation of Lookout 6.0 coupled with the OPC Inductrial Automation servers. In my application, we are running two instances of the GE Versamaz Ethernet driver to communicate with two remote (over the internet) GE Fanuc Versamax PLCS.
Every few days, the two PLCs lose connectivity. It does not appear to be a LAN connectivity issue as I can still log into the PLCs using the GE software. To fix the issue, the Lookout software must be restarted.
Has this been seen by anybody else? This poses a significant problem as lookout is used to monitor the PLCS at sewage stations - each time the connections are lost we have to deploy technicians to the sites to ensure all is working.
-andrew

Hello Andrew,
When the connection is terminated are you getting any errors or alarms? If so what are they? Also you can try to replace the object that is connected to the PLC and make sure it has the correct settings. It may also be due intermittent networking issues, losing connection and not able to connect with the object again unless Lookout is restarted again. I have not heard about any such networking issues. The attached document can be used for reference.
Regards,
RMM
http://digital.ni.com/public.nsf/websearch/5ECD2AFA039B45C186256B1300621722?OpenDocument

Bluetooth buggy issues with iphone 5s after ios 8 upgrade

I am having issues with my Handsfreelink in my 2013 Honda Pilot after the ios 8 upgrade.Basically, music works the phone does not.
What I have tried:
1) Hard reset
2) deleted and re-setup all bluetooth settings on both phone and car
I suspect this is a bug in ios8 that needs to be addressed. On a sidenote I am also unable to plug my phone into the USB port on the car, now says unsupported.

The same thing happened to me on my 2012 Subaru Outback. I'm not sure this will help you since you have a Honda, but I'm posting this just in case.
I paired the audio on my car with my iPhone 6. However, when I turned the car off and back on again, the iPhone would not pair automatically. I had to manually connect the iPhone with the car. Turns out there are two separate bluetooth pairings on my car: one for phone which allows up to 5 devices and one for audio which allows only one device. So I did the second bluetooth pairing for the phone (had already done the audio), and that fixed it. YMMV

Pool connection issue with sql server database in adf application

Hi everyone
I'm Developing a BPM application using Oracle bpm 11.1.1.5.0
My JDeveloper version is 11.1.1.5.0 and my database is SQL Server 2008.
I have created a new BPM application, an application module and created several view objects based on my sql server tables in the database.
I have only one initiator user task which has a task flow and one jspx page for that.
The problem :
when I deploy the application, in the bpm workspace initiator page, the page is shown correctly only once every other time.
I mean it's strange, the first time the user instantiates the process, it's shown correctly. The second time, it is not! The third time, it is! etc...
The interesting part is, when the page is not shown correctly, if I refresh the page it will be shown correctly.
Here's the log output from when the page is not shown correctly:
JBO-30003: Application pool model.sam.specialAppModuleLocal fails to check out an application module due to the following exception:
java.lang.ClassCastException: weblogic.jdbc.wrapper.PoolConnection_com_microsoft_sqlserver_jdbc_SQLServerConnection cannot be cast to oracle.jdbc.OracleConnection
     at oracle.jbo.server.OracleSQLBuilderImpl.setSessionTimeZone(OracleSQLBuilderImpl.java:5535)
     at oracle.jbo.server.DBTransactionImpl.refreshConnectionMetadata(DBTransactionImpl.java:5307)
     at oracle.jbo.server.DBTransactionImpl.initTransaction(DBTransactionImpl.java:1190)
     at oracle.jbo.server.DBTransactionImpl.initTxn(DBTransactionImpl.java:6823)
     at oracle.jbo.server.DBTransactionImpl2.connectToDataSource(DBTransactionImpl2.java:301)
     at oracle.jbo.server.DBTransactionImpl2.connectToDataSource(DBTransactionImpl2.java:332)
     at oracle.jbo.common.ampool.DefaultConnectionStrategy.connect(DefaultConnectionStrategy.java:203)
     at oracle.jbo.server.ApplicationPoolMessageHandler.doPoolConnect(ApplicationPoolMessageHandler.java:592)
     at oracle.jbo.server.ApplicationPoolMessageHandler.doPoolMessage(ApplicationPoolMessageHandler.java:422)
     at oracle.jbo.server.ApplicationModuleImpl.doPoolMessage(ApplicationModuleImpl.java:8995)
     at oracle.jbo.common.ampool.ApplicationPoolImpl.sendPoolMessage(ApplicationPoolImpl.java:4603)
     at oracle.jbo.common.ampool.ApplicationPoolImpl.prepareApplicationModule(ApplicationPoolImpl.java:2533)
     at oracle.jbo.common.ampool.ApplicationPoolImpl.doCheckout(ApplicationPoolImpl.java:2343)
     at oracle.jbo.common.ampool.ApplicationPoolImpl.useApplicationModule(ApplicationPoolImpl.java:3242)
     at oracle.jbo.common.ampool.SessionCookieImpl.useApplicationModule(SessionCookieImpl.java:572)
     at oracle.jbo.http.HttpSessionCookieImpl.useApplicationModule(HttpSessionCookieImpl.java:234)
     at oracle.jbo.common.ampool.SessionCookieImpl.useApplicationModule(SessionCookieImpl.java:505)
     at oracle.jbo.common.ampool.SessionCookieImpl.useApplicationModule(SessionCookieImpl.java:500)
     at oracle.adf.model.bc4j.DCJboDataControl.initializeApplicationModule(DCJboDataControl.java:516)
     at oracle.adf.model.bc4j.DCJboDataControl.getApplicationModule(DCJboDataControl.java:862)
     at oracle.adf.model.binding.DCDataControl.setErrorHandler(DCDataControl.java:483)
     at oracle.jbo.uicli.binding.JUApplication.setErrorHandler(JUApplication.java:261)
     at oracle.adf.model.BindingContext.put(BindingContext.java:1326)
     at oracle.adf.model.binding.DCDataControlReference.getDataControl(DCDataControlReference.java:174)
     at oracle.adf.model.BindingContext.instantiateDataControl(BindingContext.java:1045)
     at oracle.adf.model.dcframe.DataControlFrameImpl.doFindDataControl(DataControlFrameImpl.java:1565)
     at oracle.adf.model.dcframe.DataControlFrameImpl.internalFindDataControl(DataControlFrameImpl.java:1437)
     at oracle.adf.model.dcframe.DataControlFrameImpl.findDataControl(DataControlFrameImpl.java:1397)
     at oracle.adf.model.BindingContext.internalFindDataControl(BindingContext.java:1175)
     at oracle.adf.model.BindingContext.get(BindingContext.java:1128)
     at oracle.adf.model.binding.DCParameter.evaluateValue(DCParameter.java:82)
     at oracle.adf.model.binding.DCParameter.getValue(DCParameter.java:111)
     at oracle.adf.model.binding.DCBindingContainer.getChildByName(DCBindingContainer.java:2711)
     at oracle.adf.model.binding.DCBindingContainer.internalGet(DCBindingContainer.java:2759)
     at oracle.adf.model.binding.DCExecutableBinding.get(DCExecutableBinding.java:115)
     at oracle.adf.model.binding.DCUtil.findSpelObject(DCUtil.java:328)
     at oracle.adf.model.binding.DCBindingContainer.evaluateParameterWithElCheck(DCBindingContainer.java:1460)
     at oracle.adf.model.binding.DCBindingContainer.findDataControl(DCBindingContainer.java:1590)
     at oracle.adf.model.binding.DCIteratorBinding.initDataControl(DCIteratorBinding.java:2472)
     at oracle.adf.model.binding.DCIteratorBinding.getDataControl(DCIteratorBinding.java:2416)
     at oracle.adf.model.binding.DCIteratorBinding.getAttributeDefs(DCIteratorBinding.java:3201)
     at oracle.jbo.uicli.binding.JUCtrlValueBinding.fetchAttrDefs(JUCtrlValueBinding.java:501)
     at oracle.jbo.uicli.binding.JUCtrlValueBinding.getAttributeDefs(JUCtrlValueBinding.java:452)
     at oracle.jbo.uicli.binding.JUCtrlValueBinding.getAttributeDef(JUCtrlValueBinding.java:528)
     at oracle.jbo.uicli.binding.JUCtrlValueBinding.getAttributeDef(JUCtrlValueBinding.java:518)
     at oracle.jbo.uicli.binding.JUCtrlValueBinding$1JUAttributeDefHintsMap.<init>(JUCtrlValueBinding.java:3918)
     at oracle.jbo.uicli.binding.JUCtrlValueBinding.getAttributeHintsMap(JUCtrlValueBinding.java:4020)
     at oracle.jbo.uicli.binding.JUCtrlValueBinding.getHints(JUCtrlValueBinding.java:2442)
     at oracle.jbo.uicli.binding.JUCtrlValueBinding.internalGet(JUCtrlValueBinding.java:2277)
     at oracle.adfinternal.view.faces.model.binding.FacesCtrlAttrsBinding.internalGet(FacesCtrlAttrsBinding.java:277)
     at oracle.adf.model.binding.DCControlBinding.get(DCControlBinding.java:749)
     at javax.el.MapELResolver.getValue(MapELResolver.java:164)
     at com.sun.faces.el.DemuxCompositeELResolver._getValue(DemuxCompositeELResolver.java:173)
     at com.sun.faces.el.DemuxCompositeELResolver.getValue(DemuxCompositeELResolver.java:200)
     at com.sun.el.parser.AstValue.getValue(Unknown Source)
     at com.sun.el.ValueExpressionImpl.getValue(Unknown Source)
     at org.apache.myfaces.trinidad.bean.FacesBeanImpl.getProperty(FacesBeanImpl.java:68)
     at oracle.adfinternal.view.faces.renderkit.rich.LabelLayoutRenderer.getLabel(LabelLayoutRenderer.java:934)
     at oracle.adfinternal.view.faces.renderkit.rich.LabelLayoutRenderer.encodeAll(LabelLayoutRenderer.java:213)
     at oracle.adfinternal.view.faces.renderkit.rich.PanelLabelAndMessageRenderer.encodeAll(PanelLabelAndMessageRenderer.java:114)
     at oracle.adf.view.rich.render.RichRenderer.encodeAll(RichRenderer.java:1396)
     at org.apache.myfaces.trinidad.render.CoreRenderer.encodeEnd(CoreRenderer.java:335)
     at org.apache.myfaces.trinidad.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:767)
     at javax.faces.component.UIComponent.encodeAll(UIComponent.java:937)
     at org.apache.myfaces.trinidad.render.CoreRenderer.encodeChild(CoreRenderer.java:399)
     at oracle.adf.view.rich.render.RichRenderer.encodeChild(RichRenderer.java:2633)
     at oracle.adfinternal.view.faces.renderkit.rich.PanelFormLayoutRenderer._encodeFormItem(PanelFormLayoutRenderer.java:1015)
     at oracle.adfinternal.view.faces.renderkit.rich.PanelFormLayoutRenderer.access$100(PanelFormLayoutRenderer.java:46)
     at oracle.adfinternal.view.faces.renderkit.rich.PanelFormLayoutRenderer$FormColumnEncoder.processComponent(PanelFormLayoutRenderer.java:1491)
     at oracle.adfinternal.view.faces.renderkit.rich.PanelFormLayoutRenderer$FormColumnEncoder.processComponent(PanelFormLayoutRenderer.java:1410)
     at org.apache.myfaces.trinidad.component.UIXComponent.processFlattenedChildren(UIXComponent.java:170)
     at org.apache.myfaces.trinidad.component.UIXComponent.processFlattenedChildren(UIXComponent.java:290)
     at org.apache.myfaces.trinidad.component.UIXComponent.encodeFlattenedChildren(UIXComponent.java:255)
     at oracle.adfinternal.view.faces.renderkit.rich.PanelFormLayoutRenderer._encodeChildren(PanelFormLayoutRenderer.java:352)
     at oracle.adfinternal.view.faces.renderkit.rich.PanelFormLayoutRenderer.encodeAll(PanelFormLayoutRenderer.java:187)
     at oracle.adf.view.rich.render.RichRenderer.encodeAll(RichRenderer.java:1396)
     at org.apache.myfaces.trinidad.render.CoreRenderer.encodeEnd(CoreRenderer.java:335)
     at org.apache.myfaces.trinidad.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:767)
     at javax.faces.component.UIComponent.encodeAll(UIComponent.java:937)
     at org.apache.myfaces.trinidad.render.CoreRenderer.encodeChild(CoreRenderer.java:399)
     at oracle.adf.view.rich.render.RichRenderer.encodeChild(RichRenderer.java:2633)
     at oracle.adfinternal.view.faces.renderkit.rich.PanelGroupLayoutRenderer._encodeChild(PanelGroupLayoutRenderer.java:432)
     at oracle.adfinternal.view.faces.renderkit.rich.PanelGroupLayoutRenderer.access$300(PanelGroupLayoutRenderer.java:30)
     at oracle.adfinternal.view.faces.renderkit.rich.PanelGroupLayoutRenderer$EncoderCallback.processComponent(PanelGroupLayoutRenderer.java:682)
     at oracle.adfinternal.view.faces.renderkit.rich.PanelGroupLayoutRenderer$EncoderCallback.processComponent(PanelGroupLayoutRenderer.java:601)
     at org.apache.myfaces.trinidad.component.UIXComponent.processFlattenedChildren(UIXComponent.java:170)
     at org.apache.myfaces.trinidad.component.UIXComponent.processFlattenedChildren(UIXComponent.java:290)
     at org.apache.myfaces.trinidad.component.UIXComponent.encodeFlattenedChildren(UIXComponent.java:255)
     at oracle.adfinternal.view.faces.renderkit.rich.PanelGroupLayoutRenderer.encodeAll(PanelGroupLayoutRenderer.java:358)
     at oracle.adf.view.rich.render.RichRenderer.encodeAll(RichRenderer.java:1396)
     at org.apache.myfaces.trinidad.render.CoreRenderer.encodeEnd(CoreRenderer.java:335)
     at org.apache.myfaces.trinidad.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:767)
     at javax.faces.component.UIComponent.encodeAll(UIComponent.java:937)
     at org.apache.myfaces.trinidad.render.CoreRenderer.encodeChild(CoreRenderer.java:399)
     at oracle.adf.view.rich.render.RichRenderer.encodeChild(RichRenderer.java:2633)
     at org.apache.myfaces.trinidad.render.CoreRenderer.encodeAllChildren(CoreRenderer.java:415)
     at oracle.adfinternal.view.faces.renderkit.rich.PanelHeaderRenderer.renderChildrenAfterHelpAndInfo(PanelHeaderRenderer.java:508)
     at oracle.adfinternal.view.faces.renderkit.rich.PanelHeaderRenderer._renderContentCell(PanelHeaderRenderer.java:1032)
     at oracle.adfinternal.view.faces.renderkit.rich.PanelHeaderRenderer.renderContentRow(PanelHeaderRenderer.java:456)
     at oracle.adfinternal.view.faces.renderkit.rich.ShowDetailHeaderRenderer.renderContentRow(ShowDetailHeaderRenderer.java:165)
     at oracle.adfinternal.view.faces.renderkit.rich.PanelHeaderRenderer.encodeAll(PanelHeaderRenderer.java:217)
     at oracle.adfinternal.view.faces.renderkit.rich.ShowDetailHeaderRenderer.encodeAll(ShowDetailHeaderRenderer.java:86)
     at oracle.adf.view.rich.render.RichRenderer.encodeAll(RichRenderer.java:1396)
     at org.apache.myfaces.trinidad.render.CoreRenderer.encodeEnd(CoreRenderer.java:335)
     at org.apache.myfaces.trinidad.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:767)
     at javax.faces.component.UIComponent.encodeAll(UIComponent.java:937)
     at org.apache.myfaces.trinidad.render.CoreRenderer.encodeChild(CoreRenderer.java:399)
     at oracle.adf.view.rich.render.RichRenderer.encodeChild(RichRenderer.java:2633)
     at oracle.adfinternal.view.faces.renderkit.rich.PanelGroupLayoutRenderer._encodeChild(PanelGroupLayoutRenderer.java:432)
     at oracle.adfinternal.view.faces.renderkit.rich.PanelGroupLayoutRenderer.access$300(PanelGroupLayoutRenderer.java:30)
     at oracle.adfinternal.view.faces.renderkit.rich.PanelGroupLayoutRenderer$EncoderCallback.processComponent(PanelGroupLayoutRenderer.java:682)
     at oracle.adfinternal.view.faces.renderkit.rich.PanelGroupLayoutRenderer$EncoderCallback.processComponent(PanelGroupLayoutRenderer.java:601)
     at org.apache.myfaces.trinidad.component.UIXComponent.processFlattenedChildren(UIXComponent.java:170)
     at org.apache.myfaces.trinidad.component.UIXComponent.processFlattenedChildren(UIXComponent.java:290)
     at org.apache.myfaces.trinidad.component.UIXComponent.encodeFlattenedChildren(UIXComponent.java:255)
     at oracle.adfinternal.view.faces.renderkit.rich.PanelGroupLayoutRenderer.encodeAll(PanelGroupLayoutRenderer.java:358)
     at oracle.adf.view.rich.render.RichRenderer.encodeAll(RichRenderer.java:1396)
     at org.apache.myfaces.trinidad.render.CoreRenderer.encodeEnd(CoreRenderer.java:335)
     at org.apache.myfaces.trinidad.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:767)
     at javax.faces.component.UIComponent.encodeAll(UIComponent.java:937)
     at org.apache.myfaces.trinidad.render.CoreRenderer.encodeChild(CoreRenderer.java:399)
     at oracle.adf.view.rich.render.RichRenderer.encodeChild(RichRenderer.java:2633)
     at org.apache.myfaces.trinidad.render.CoreRenderer.encodeAllChildren(CoreRenderer.java:415)
     at oracle.adfinternal.view.faces.renderkit.rich.PanelHeaderRenderer.renderChildrenAfterHelpAndInfo(PanelHeaderRenderer.java:508)
     at oracle.adfinternal.view.faces.renderkit.rich.PanelHeaderRenderer._renderContentCell(PanelHeaderRenderer.java:1032)
     at oracle.adfinternal.view.faces.renderkit.rich.PanelHeaderRenderer.renderContentRow(PanelHeaderRenderer.java:456)
     at oracle.adfinternal.view.faces.renderkit.rich.PanelHeaderRenderer.encodeAll(PanelHeaderRenderer.java:217)
     at oracle.adf.view.rich.render.RichRenderer.encodeAll(RichRenderer.java:1396)
     at org.apache.myfaces.trinidad.render.CoreRenderer.encodeEnd(CoreRenderer.java:335)
     at org.apache.myfaces.trinidad.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:767)
     at javax.faces.component.UIComponent.encodeAll(UIComponent.java:937)
     at org.apache.myfaces.trinidad.render.CoreRenderer.encodeChild(CoreRenderer.java:399)
     at oracle.adf.view.rich.render.RichRenderer.encodeChild(RichRenderer.java:2633)
     at oracle.adfinternal.view.faces.renderkit.rich.PanelGroupLayoutRenderer._encodeChild(PanelGroupLayoutRenderer.java:432)
     at oracle.adfinternal.view.faces.renderkit.rich.PanelGroupLayoutRenderer.access$300(PanelGroupLayoutRenderer.java:30)
     at oracle.adfinternal.view.faces.renderkit.rich.PanelGroupLayoutRenderer$EncoderCallback.processComponent(PanelGroupLayoutRenderer.java:682)
     at oracle.adfinternal.view.faces.renderkit.rich.PanelGroupLayoutRenderer$EncoderCallback.processComponent(PanelGroupLayoutRenderer.java:601)
     at org.apache.myfaces.trinidad.component.UIXComponent.processFlattenedChildren(UIXComponent.java:170)
     at org.apache.myfaces.trinidad.component.UIXComponent.processFlattenedChildren(UIXComponent.java:290)
     at org.apache.myfaces.trinidad.component.UIXComponent.encodeFlattenedChildren(UIXComponent.java:255)
     at oracle.adfinternal.view.faces.renderkit.rich.PanelGroupLayoutRenderer.encodeAll(PanelGroupLayoutRenderer.java:358)
     at oracle.adf.view.rich.render.RichRenderer.encodeAll(RichRenderer.java:1396)
     at org.apache.myfaces.trinidad.render.CoreRenderer.encodeEnd(CoreRenderer.java:335)
     at org.apache.myfaces.trinidad.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:767)
     at javax.faces.component.UIComponent.encodeAll(UIComponent.java:937)
     at org.apache.myfaces.trinidad.render.CoreRenderer.encodeChild(CoreRenderer.java:399)
     at oracle.adf.view.rich.render.RichRenderer.encodeChild(RichRenderer.java:2633)
     at org.apache.myfaces.trinidad.render.CoreRenderer.encodeAllChildren(CoreRenderer.java:415)
     at oracle.adfinternal.view.faces.renderkit.rich.FormRenderer.encodeAll(FormRenderer.java:220)
     at oracle.adf.view.rich.render.RichRenderer.encodeAll(RichRenderer.java:1396)
     at org.apache.myfaces.trinidad.render.CoreRenderer.encodeEnd(CoreRenderer.java:335)
     at org.apache.myfaces.trinidad.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:767)
     at javax.faces.component.UIComponent.encodeAll(UIComponent.java:937)
     at org.apache.myfaces.trinidad.render.CoreRenderer.encodeChild(CoreRenderer.java:399)
     at oracle.adf.view.rich.render.RichRenderer.encodeChild(RichRenderer.java:2633)
     at org.apache.myfaces.trinidad.render.CoreRenderer.encodeAllChildren(CoreRenderer.java:415)
     at oracle.adfinternal.view.faces.renderkit.rich.DocumentRenderer.encodeAll(DocumentRenderer.java:1273)
     at oracle.adf.view.rich.render.RichRenderer.encodeAll(RichRenderer.java:1396)
     at org.apache.myfaces.trinidad.render.CoreRenderer.encodeEnd(CoreRenderer.java:335)
     at org.apache.myfaces.trinidad.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:767)
     at javax.faces.component.UIComponent.encodeAll(UIComponent.java:937)
     at javax.faces.component.UIComponent.encodeAll(UIComponent.java:933)
     at com.sun.faces.application.ViewHandlerImpl.doRenderView(ViewHandlerImpl.java:266)
     at com.sun.faces.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:197)
     at javax.faces.application.ViewHandlerWrapper.renderView(ViewHandlerWrapper.java:189)
     at org.apache.myfaces.trinidadinternal.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:193)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._renderResponse(LifecycleImpl.java:800)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:294)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:214)
     at javax.faces.webapp.FacesServlet.service(FacesServlet.java:266)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
     at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:205)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.adf.share.http.ServletADFFilter.doFilter(ServletADFFilter.java:62)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:106)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:446)
     at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:446)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:271)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:177)
     at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.bpel.services.workflow.client.worklist.util.WorkflowFilter.doFilter(WorkflowFilter.java:205)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.bpel.services.workflow.client.worklist.util.DisableUrlSessionFilter.doFilter(DisableUrlSessionFilter.java:70)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:175)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:111)
     at java.security.AccessController.doPrivileged(Native Method)
     at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
     at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:413)
     at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:94)
     at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:161)
     at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:136)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3715)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
     at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
     at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
     at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)I'm almost sure this is a configuration issue and not anything else.
Can some one please show me what I'm doing wrong here?
Thanks in advance

Hello thank you
I found the file and changed the SQL Flavor to SQL Server but it still shows a blank page with the error instead of the page every once in a while.
The error has changed though, now it is like this:
oracle.adf.controller.activity.ActivityLogicException: ADFC-06014: An exception occured when invoking a task flow finalizer.
     at oracle.adfinternal.controller.util.Utils.createAndLogActivityLogicException(Utils.java:230)
     at oracle.adfinternal.controller.activity.TaskFlowReturnActivityLogic.invokeFinalizer(TaskFlowReturnActivityLogic.java:697)
     at oracle.adfinternal.controller.activity.TaskFlowReturnActivityLogic.abandonTaskFlow(TaskFlowReturnActivityLogic.java:412)
     at oracle.adfinternal.controller.engine.ControlFlowEngine.handleException(ControlFlowEngine.java:668)
     at oracle.adfinternal.controller.engine.ControlFlowEngine.doRouting(ControlFlowEngine.java:887)
     at oracle.adfinternal.controller.engine.ControlFlowEngine.doRouting(ControlFlowEngine.java:778)
     at oracle.adfinternal.controller.engine.ControlFlowEngine.invokeTaskFlow(ControlFlowEngine.java:243)
     at oracle.adfinternal.controller.application.RemoteTaskFlowCallRequestHandler.invokeTaskFlowByUrl(RemoteTaskFlowCallRequestHandler.java:99)
     at oracle.adfinternal.controller.application.RemoteTaskFlowCallRequestHandler.doCreateView(RemoteTaskFlowCallRequestHandler.java:64)
     at oracle.adfinternal.controller.application.BaseRequestHandlerImpl.createView(BaseRequestHandlerImpl.java:57)
     at org.apache.myfaces.trinidadinternal.application.ViewHandlerImpl.createView(ViewHandlerImpl.java:95)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._restoreView(LifecycleImpl.java:662)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:301)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:186)
     at javax.faces.webapp.FacesServlet.service(FacesServlet.java:265)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
     at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:205)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:106)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:446)
     at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:446)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:271)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:177)
     at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.bpel.services.workflow.client.worklist.util.WorkflowFilter.doFilter(WorkflowFilter.java:205)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.bpel.services.workflow.client.worklist.util.DisableUrlSessionFilter.doFilter(DisableUrlSessionFilter.java:70)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:175)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:111)
     at java.security.AccessController.doPrivileged(Native Method)
     at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
     at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:413)
     at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:94)
     at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:161)
     at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:136)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3715)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
     at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
     at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
     at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
Caused by: javax.el.ELException: java.lang.NullPointerException: FacesContext.getRenderKit() returned null while trying to get the org.apache.myfaces.trinidad.render.ExtendedRenderKitService service; please check your configuration.
     at com.sun.el.parser.AstValue.invoke(Unknown Source)
     at com.sun.el.MethodExpressionImpl.invoke(Unknown Source)
     at oracle.adf.controller.internal.util.ELInterfaceImpl.invokeMethod(ELInterfaceImpl.java:173)
     at oracle.adfinternal.controller.activity.TaskFlowReturnActivityLogic.invokeFinalizer(TaskFlowReturnActivityLogic.java:693)
     ... 55 more
Caused by: java.lang.NullPointerException: FacesContext.getRenderKit() returned null while trying to get the org.apache.myfaces.trinidad.render.ExtendedRenderKitService service; please check your configuration.
     at org.apache.myfaces.trinidad.util.Service.getRenderKitService(Service.java:113)
     at oracle.bpel.services.workflow.worklist.adf.InvokeActionBean.invokeScript(InvokeActionBean.java:1083)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     ... 59 more
I have noticed that this time only if the user submits the page, the next time he/she initiates a new task the error appears.
Do u think this has to do something with pool settings or session settings or something like that?
Thanks again

Sybase Connectivity Issues with OC4J Server

I am trying to access a Sybase Database using JDeveloper.
I have downloaded the sybase Jconnect product(version 5.5) and am able to access the database through the IDE.
I have created a test jspx document to validate the DB connectivity. When I attempt to run the document. I am getting the following error from the OC4J server: javax.servlet.jsp.JspException: Unable to get connection, DataSource invalid: "java.sql.SQLException: No suitable driver".
The document code is as follows:
<sql:setDataSource
dataSource="AgileSCM"
driver="com.sybase.jdbc2.jdbc.SybDriver"
password="password"
url="jdbc:sybase:Tds:server_name:4002/db_name"
user="uer_name" var="myDs"
scope="session"/>
<sql:query var="company" dataSource="myDs">
SELECT * FROM dbo.company
</sql:query>
I am new to using Jdeveloper so I would appreciate any help.
Thanks,
Brian Muraco

I created a db connection called AgileSCM in JDeveloper which is accessing the Sybase database. I tried coding the document with and with out specifying the datasource with the same result. Am I not doing something really simple?

Connectivity issues with AE card after v4.2 update on 10.3.9

Teach me not to read up on updates before installing them, though I suppose I shouldn't have to....grr. Stupid lack of quality control.
Anyway, I have a 1.25ghz PB running os 10.3.9, and my network was running just fine before I installed the update. Afterward, when I opened up Safari, I had full, fast connectivity for about 15 minutes. Then certain sites, like the MacAddict forums and Yahoo, simply refused to open (they timed out), and several others would take five or six tries to get through (all other tries would time out) Some sites would open consistently, but the vast majority of those I could even contact would not load properly or completely. Most would either not load graphics, hang midway through the transfer, or never reach 100%
Oddly, my connectivity through other non-web ports (AIM, bittorrent) seems unaffected.
My wired ethernet capability is still fine as well, no problems with any browser, so long as I'm plugged in (to the netgear router at the moment).
This same problem occurs with Safari, Mozilla and IE (yeah, I even tried IE) So I doubt it's the Safari 1.3.1 update that I installed at the same time.
It also occurs on both an AEBS and a Netgear WGR614, so it's not a matter of the AEBS firmware.
I've tried rebooting, resetting, reinstalling the 4.2 software from the standalone package, reinputting my network settings, deleting pref files, etc. All to no avail.
If anyone has any clue what's going on, I would much appreciate the help.

Sadly I don't have answers either. I'm not sure what happened but as of the last few days i've been having the same problems. There are also times when my mac mini wont even connect to the base station.
What I find strange is that my sister has the same airport firmware installed and her machine is unaffected. I'm on hold with apple atm, so we shall see what they can figure out.

Issue with iPhone 4 after iOS5.1 Upgrade

iPhone 4
Upgraded to iOSX 5.1
Previous used it hands free in my Dodge Ram with RES radio with UConnect Bluetooth.
Now, will not connect.
I think this is an iOSX issue mainly as I notice now when making a call (anytime) where I the audio output speaker or other audio option (iphone or Uconnect) I now only have the option for speaker.
I have:
Told bluetooth to forget the original device and renamed the phone in the Uconnect memory option.
Done a hard reset of the phone itself.
Spent plenty of time banging around looking for UConnect upgrades or downloads to no avail.
Anybody got a clue?
Thanks,
MTG

1.) Tell Bluetooth to forget the UConnect Device
2.) Repair to UConnect.
3.) When you go thru the pairing process, delete the old names of the phone and come up with a new name for the new pairing.
4.) Power down vehicle and Uconnect
5.) Power down the iPhone completly, hold down the top right hand button till you get the power screen then turn it off. Leave it off for a touch, say 2 min.
6.) Hit home screen button or top right button and repower phone.
You should be able to connect with Uconnect again by bluetooth and you will have the same options as before with audio.

Issue with Yahoo mail after iOS 7 upgrade

Since the ios upgrade today, in the native mail app on my iphone 5, the spam mail is showing up in my inbox folder vs. my junk folder. On the internet, when I go to Yahoo, the junk mail shows up in the proper junk folder, but in the iPhone mail app, junk is dropped into the inbox with everything else.
Anyone else seeing this? Is there a solution? Thanks.
PS- I should mention I have tried deleting then re-adding yahoo to the mail app. I have also removed the mail app from the multi-tasking area to completely close the app and re-open. Neither made a difference.

So under Settings > Mail, Contacts, Calendars - you have a Gmail account setup and you do not have the option to turn on or off 'Contacts'?

BPC 4.2 connectivity issues with server

Hello All, I have a user that is experiencing connectivity issues with our server. This appears to be at a client level and I would like to know how to correct it. We are currently using BPC 4.2 (service pack 2).
The problem occurred when they had IE8 uninstalled and installed IE6 today. This morning he had no issues connecting to BPC w/ IE8, but lost that connection when IE6 was installed. When working through the connection wizard, the following errors appear.
Here are the pop-up error messages they are receiving:
"The server name, or IP address (srvbpmarl01) is unreachable now. Please check the following:
1. LAN connection or Internet connection is working properly.
2. Server name or IP address is invalid
Detailed Error Message: Internet connection is not available"
"The system cannot download information from server: SRVBPMARL01.
There may be a network or security issue.
Error message: Your LAN connection or Internet connection is not working properly.
Detailed error message: Internet connection is not available."
I can't help but feel this issue is a result of the IE 8/6 complications, but I do not know which actions to take next.
Thanks for any help you could provide!

I don't think the problem is related to IE.
It seems to be more a problem of configuration of IE.
I suggest to chec the follow:
1. Please make sure you are not using any proxy into connection of IE. Ot if you neede then make sure you will add your server into exceptions of proxy.
2. Try to connect with IE to server. use: http://nameofserver/osoft and also http://nameofserver.
If you received errors in both cases then it seems it is a problem with installaion of IE.
If you are able to connect and to display the default page for osoft then it must be a configuration problem.
I suppose MSDTC or Pivot table services is not correct.Try to use slow connection when you connect to server not High connection.
Regards
Sorin Radulescu

CR2008 connectivity issue with BOE Universes(sap and non sap universes)

Hi Experts !!
Recently we tried to build/connect to a Universe in Crystal Reports2008 via 'Make a new connection tab'.
The universes are of SAP BW or non SAP Lying in BOE Servers and we are trying to build reports on them by conncting/utilizing the universes as a database for Crystal Reporting.
Our issue is most of the time we are not able to connect to the Universes and the connectivity blows out by some 'communication Error' thing initially.
While at some other points in time, the connectivity takes us to the Universe and we are able to select few characteristics and key figures from the Universe but the moment we go futher and try to run by pressing 'OK' button it blows out and say' LOGON FAILED'.
Apparantly, it is an connectivity issue with BOE server and from the different blogs it looks like it is a known issue for long.
The proposed issue resolution were like either CR2008 should be SP2 with BOE SP3 or there should be some additional .dll files defined in the paths in case of MSSQL database. None of this applies to us as we are on CR2008 with SP3 and going back to SP2 is probably not a viable option for us, and we are using Oracle as underlying database in this specific case.( i would like to tell you here that we are able to connect to Oracle Database directly though).
We have raised a message with SAP and was just wondering if we do have some solution/workaround already available to this known issue in place please?
Thanks&Regards.
Edited by: AMIT GHILDYAL on Aug 1, 2011 2:41 PM
Edited by: AMIT GHILDYAL on Aug 1, 2011 2:44 PM
Edited by: AMIT GHILDYAL on Aug 1, 2011 3:14 PM

Hi Amit,
Moved to Universe Forum.
If you have a case logged then no point posting here also, this is a public site and not a case management tool.
Once you do get the solution from your case please post it here also to help others if they have the same problem.
Thank you
Don

Intermittent proxy error "There is a problem with the proxy server's security certificate. Outlook is unable to connect to the proxy server "

Hi all,
From time to time (at least once a day), the following message pops up on the user's screen:
"There is a problem with the proxy server's security certificate. Outlook is unable to connect to the proxy server . Error Code 80000000)."
If we click "OK" it goes away and everything continues to work although sometimes Outlook disconnects. It is quite annoying...
Any ideas?
Thank you in advance

Hi,
For the security alert issue, I'd like to recommend you check the name in the alert windows, and confirm if the name is in your certificate.
Additionally, to narrow down the cause, when the Outlook client cannot connect again, I recommand you firstly check the connectivity by using Test E-mail AutoConfiguration. For more information, you can refe to the following article:
http://social.technet.microsoft.com/Forums/en-US/54bc6b17-9b60-46a4-9dad-584836d15a02/troubleshooting-and-introduction-for-exchange-20072010-autodiscover-details-about-test-email?forum=exchangesvrgeneral
Thanks,
Angela Shi
TechNet Community Support

Outlook is unable to connect to the proxy server.(Error Code 10)

Hi,
I had problems with RPC proxy, I was trying to setup cutover migration.
So I read somewhere that i need to change the certprincipalname with Set-Outlookprovider.
But after this change my outlook was not working anymore
The settings before the change were:
Name Server CertPrincipalName TTL
EXCH
1
EXPR
1
WEB
1
So I set this back to the original (above) but this didn't helped...
Outlook 2013 and Exchange 2013
There is a problem with the proxy server's security certificate. The name on the security certificate is invalid or does not match the name of the target site mail.abc-company.com.
Outlook is unable to connect to the proxy server.(Error Code 10)

Hi,
Please make sure the mail.abc-company.com is included in your Exchange certificate which has been assigned with IIS service.
If possible, please run the following command for double check:
Get-ExchangeCertificate | FL
For Autodiscover service, please run
Test E-mail AutoConfiguration to check if the connection is successful in Log tab and confirm the other services URL can use proper namespace in Results tab for request access.
If the Autodiscover service fails, please create a SRV record with mail.abc-company.com for Autodiscover service to have a try:
http://support2.microsoft.com/kb/940881/en-us
Regards,
Winnie Liang
TechNet Community Support

Outlook is unable to connect to the proxy server. (Error code 0)

Hello,
I have just commenced a Exchange 2007 SP3 to Exchange 2013 SP1 migration following the following guide: http://blogs.technet.com/b/meamcs/archive/2013/07/25/part-1-step-by-step-exchange-2007-to-2013-migration.aspx
As per the above guide, my 2007 environment is now known as legacy.company.com and my 2013, webmail.company.com.
I'm using the same certificate on both boxes and it has the names autodiscover.company.com, webmail.company.com and legacy.company.com. All that seems to be working fine.
OWA is functioning perfectly, hitting https://webmail.company.com will pass the user off to https://legacy.company.com if the mailbox is on 2007. Alongside this, Outlook also has no issues connecting to 2007 mailboxes with the client proxy settings
being reconfigured to https://legacy.company.com automatically.
My problem comes when a mailbox is migrated to 2013. OWA functions fine and presents the mailbox but Outlook is unable to connect, presenting the error:
There is a problem with the proxy server's security certificate.
The name on the security certificate is invalid or does not match the name of the target site webmail.company.com.
Outlook is unable to connect to the proxy server. (Error Code 0)
If I modify the Outlook client's settings and disable "Only connect to proxy servers that have this principal name in their certificate: msstd:webmail.company.com", Outlook connects and functions fine.
I'm at a loss and have tried everything I can think and find on google. Any suggestions would be greatly appreciated.

Hi,
Please refer to the following article :
http://support.microsoft.com/kb/923575
Cause:
This issue may occur if one or more of the following conditions are true:
The connection to the server requires a certification authority (CA).
You have not trusted the certification authority at the root.
The certificate may be invalid or revoked.
The certificate does not match the name of the site.
A third-party add-in is preventing access.
Solution:
To examine the certificate, follow these steps:
In Microsoft Internet Explorer, connect to the RPC server or to the secure server. For example, type
https://www.<var>server_name</var>.com/rpc in the Address bar of the Web browser, and then press ENTER.
Note The <var>server_name</var> placeholder references the RPC server name or the secure server name.
Double-click the padlock icon that is located in the lower-right corner of the Web browser.
Click the Details tab.
Note the information in the following fields:
Valid to
The Valid to field indicates the date until which the certificate is valid.
Subject
The data in the Subject field should match the site name.
Hope this helps!
Thanks.
Niko Cheng
TechNet Community Support

Outlook is unable to connect to the proxy server.(Error Code 10) when users opened Outlook 2010

Hi All
Exchange Server - 2013 CU2 (Windows 2012 Standard)
AD Server - 2003 R2 SP2
exchange-svr01.domain.com - internal name
mail.company.net - external name
When users opened Outlook 2010, they will encountered
"There is a problem with the proxy server's security certificate. The name on the security certificate is invalid or does not match the name of the target site exchange-svr01.domain.com.
Outlook is unable to connect to the proxy server.(Error Code 10)"
I also used the Microsoft Remote Connectivity Analyzer to test RPC/HTTP connectivity.
The RPC/HTTP test completed successfully.
    Validating the certificate name.
    Certificate name validation failed.
     Host name company.net doesn't match any name found on the server certificate CN=AMAZONA-U59HG9G.
Testing SSL mutual authentication with the RPC proxy server.
    The test passed with some warnings encountered.
The certificate common name company.net doesn't match the mutual authentication string provided mail.company.net; however, a match was found in the subject alternative name extension.
please help.

Hi PS CL
[PS] C:\Windows\system32>Get-OutlookAnywhere
RunspaceId                         : c457e8aa-a0f3-4a0f-aa02-9eff24d02821
ServerName                         : exchange-svr01
SSLOffloading                      : True
ExternalHostname                   : mail.company.net
InternalHostname                   : exchange-svr01.domain.com
ExternalClientAuthenticationMethod : Negotiate
InternalClientAuthenticationMethod : Ntlm
IISAuthenticationMethods           : {Basic, Ntlm, Negotiate}
XropUrl                            :
ExternalClientsRequireSsl          : True
InternalClientsRequireSsl          : True
MetabasePath                       : IIS://exchange-svr01.domain.COM/W3SVC/1/ROOT/Rpc
Path                               : C:\Program Files\Microsoft\Exchange Server\V15\FrontEnd\HttpProxy\rpc
ExtendedProtectionTokenChecking    : None
ExtendedProtectionFlags            : {}
ExtendedProtectionSPNList          : {}
AdminDisplayVersion                : Version 15.0 (Build 712.22)
Server                             : exchange-svr01
AdminDisplayName                   :
ExchangeVersion                    : 0.20 (15.0.0.0)
Name                               : Rpc (Default Web Site)
DistinguishedName                  : CN=Rpc (Default Web
                                     Site),CN=HTTP,CN=Protocols,CN=exchange-svr01,CN=Servers,CN=Exchange
Administrative
                                     Group (FYDIBOHF23SPDLT),CN=Administrative
Groups,CN=domain,CN=Microsoft
                                     Exchange,CN=Services,CN=Configuration,DC=domain,DC=COM
Identity                           : exchange-svr01\Rpc (Default Web Site)
Guid                               : 33c3cb74-e490-487d-844c-4072334089a1
ObjectCategory                     : domain.COM/Configuration/Schema/ms-Exch-Rpc-Http-Virtual-Directory
ObjectClass                        : {top, msExchVirtualDirectory, msExchRpcHttpVirtualDirectory}
WhenChanged                        : 8/17/2013 10:14:55 AM
WhenCreated                        : 6/25/2013 1:47:50 PM
WhenChangedUTC                     : 8/17/2013 2:14:55 AM
WhenCreatedUTC                     : 6/25/2013 5:47:50 AM
OrganizationId                     :
OriginatingServer                  : ADserver.domain.COM
IsValid                            : True
ObjectState                        : Changed

Outlook 2011 Connection Issue with Proxy Server after 10.8 Upgrade

Similar Messages

Maybe you are looking for