Outlook 2011 for Mac + Oracle Outlook Email Integration On Demand

Does anyone know of a "Oracle Outlook Email Integration On Demand" plug in that'll work with Outlook 2011 for Mac?

jack19stags wrote:
Hi,
Thanks for all of the responses - I have now done these suggested settings which has downloaded all of the separate inbox folders but I am still having a couple of errors:
1: If I delete an email on outlook 2011 it doesn't actually delete it from my email account
Are you 100% sure the account is now IMAP?
2: I am unable to send any emails I get an SMTP error?
Have you ticked the 'My outgoing server requires authentication' box in the outgoing server section.
3: I still have to click send/receive to receive any emails
This is for Outlook 2010 on Windows, but there will be something similar on your version. Go to File>Options>Advanced>Send/Receive where you should be able to set the parameters required.
Any thoughts would be greatly appreciated
Jack

Similar Messages

I have problems interfacing Outlook 2011 for Mac with my email provider Cable and Wireless Guernsey. Any ideas? Done everything C&W suggest

I have problems interfacing Outlook 2011 for Mac with my email provider Cable and Wireless Guernsey. Any ideas? Don everything C&W suggest

OK I just transitioned to MacMail, iCal, and Mac address book. Goodbye Outlook, It was great for 18 years and painful for the last year. Microsoft is losing share with subpar software development.

Unattended/silent install "oracle outlook email integration on demand"

I am looking for how to create sms package for "oracle outlook email integration on demand" (unattended/silent/ install from command line setup.exe /s /v"/qb"????? no luck

Please post this question on the CRM On Demand Integration Development forum.

Error installing Oracle Outlook Email Integration On Demand: Registry Issue

Good day all-
Hoping that someone has come across this issue before and is aware of a solution - I have a user that is unable to install the Oracle Outlook Email Integration On Demand plug in for Outlook.
Outlook is not running when the install is done, yet a "Severe" error pop-up is generated during the install which says: "Setup was not able to write all necessary registry entries. The installation will be aborted!"
Still see the same issue after a reboot and no other users are having a problem installing it - anyone have any ideas and/or which registry entires the installer is trying to touch?
Thanks!

Hi,
Does the user have admin rights to their machine? Registry entries for OEI are writing to the following:
HKEY_LOCAL_MACHINE>SOFTWARE>Windows>Uninstall>Oracle Outlook Email Integration On Demand
HKEY_LOCAL_USER>Software>Siebel CRM On Demand>Siebel Outlook Email Integration On Demand
HKEY_LOCAL_USERS>Software>Siebel CRM On Demand>Siebel Outlook Email Integration On Demand
Thanks,
Sean

Outlook 2011 for Mac: Lost all emails

Hello,
I installed Microsoft 2011 for Mac two months ago and I was quite happy with that. Ok, I must say that Outlook often pops up with "Outlook 2011 has encountered a problem and needs to close". This is annoying, but when Outlook is re-opened all runs smoothly. I understand this is a problem with Microsoft, rather than with Mac, so I live with the idea.
The problem here is that when I have opened my Outlook this morning, to my great surprise, I have found out that all my emails have disappeared: nothing in my Inbox, no folders, no Archive, no contacts, no task list, no accounts set... Nothing! Outlook appears as if it is the first time it is used.
As far as I recall, I didn't do anything weird yesterday before shutting down. Luckily, I have a backup dated 17th July (no Archive folders, though), so I have lost just 2 weeks of emails (I'm currently importing that) but still, I would like to know what has happened to my emails and why.
Anyone can help, please?
Thank you for your consideration and for your help.
Cotomelon

ArthurRN wrote:
Hi, I also had the same problem. Were you able to fix it?
Thanks
Please post Office/Outlook related questions on Microsoft's own forums for their Mac software as Apple Communities only provide support for Apple products:
http://www.officeformac.com/productforums

Outlook 2011 for MAC marks IMAP emails as READ soon after they are received, even though I didnt read them

I have a 2 gmail accounts configured as IMAP on outlook.
Each time I receive an email on these accounts, it will appear as UNREAD for a short while, then, after a couple of syncs, it will turn to READ, even if I do not read it, hover over it, click on it, etc...
I thought that could be a sync problem with my iphone (the same accounts are also configured as IMAP on my iphone) so I switched off the iphone. Same problem
I thought that could be a sync problem with the web interface of gmail so I logged off my accounts on my firefox web browser and exited the browser. Same problem.
I have no other device that connects to my gmail accounts neither in pop nor IMAP.
I have a third email account configured on outlook as pop, and this one works perfectly.
I made sure that Preferences > Reading > "mark mail as read only when opened in a separate window" ... is clicked...
I have also rebuilt my identity, which didn't solve the issue...
The problem happens on outlook for mac 2011 version 14.3.5 and 14.3.6 (just updated outlook to that version).
I am on MAC OS 10.6.8
This has been happening since I decided to use IMAP for my gmail accounts (I was using pop before).
It is very annoying as I regularly miss time critical emails.
Anyone who can point me to a solution or a work around will have my eternal gratitude!!
THanks

I have already changed the default in the preview pane...
Preferences > Reading > "mark mail as read only when opened in a separate window" ... is clicked...
It is something different... maybe a bug...
I hope someone comes up with a workaround! Or at least some other threads that would help me see through... I've been stuck on this for weeks

How to export Apple mail emails to Microsoft Outlook 2011 for mac?

Please provide some solution to migrate apple mail emails to outlook 2011 for mac.
NOTE: emails from the server have been deleted.

Hi,
Please check if this helps:
http://support.microsoft.com/kb/2413370/en-us
Since this forum is for general questions and feedback related to Outlook for Windows, it's better to post your question to the forum for Mac:
http://answers.microsoft.com/en-us/mac/forum/macoutlook
The reason why we recommend posting appropriately is
you
will
get the most qualified pool of respondents,
and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us.
Thank you for your understanding.
Steve Fan
TechNet Community Support

Outlook Email Integration issue....

After release 19 upgrade, few users have reported a strange issue that after they use the 'Add to CRM on Demand' button in outlook to sync their emails, those emails are deleted from the Outlook's inbox.
They also reported that they are not using the 'Automatic Association' option for syncing. Can you help me resolve this issue.

Hi,
Does the user have admin rights to their machine? Registry entries for OEI are writing to the following:
HKEY_LOCAL_MACHINE>SOFTWARE>Windows>Uninstall>Oracle Outlook Email Integration On Demand
HKEY_LOCAL_USER>Software>Siebel CRM On Demand>Siebel Outlook Email Integration On Demand
HKEY_LOCAL_USERS>Software>Siebel CRM On Demand>Siebel Outlook Email Integration On Demand
Thanks,
Sean

Where do i change the server in outlook email integration?

Hi,
I work with 2 servers (pods) in CRM, but when i installed outlook email integration it conects to one of them and cannot find where to configure the other server, any help?
thanks

You can change this in your regedit HKEY_LOCAL_MACHINE: Software: Siebel CRM On Demand: Siebel Outlook Email Integration On Demand
Change the values for UI Server and Server
You will have to change this each time you switch pods - as far as i know, unless there is some way you can put two buttons on your outlook and each button pointing to different pods.

I cannot send email from Outlook 2011 (for Mac). But can send from other applications

I have Outlook 2011 for Mac - I have validated the settings and up until yesterday could send and receive emails using my .mac account.
I can send using icloud and mail (I use Outlook for work purposes) and can send in outlook using my work accounts.
My settings
Incoming server - imap.mail.me.com
Use SSL to connect checked.
Outgoing server - smtp.mail.me.com
override default port checked (port 587)
use SSL to connect checked
authentication - Username and password.
I have rebuilt the database - no effect.
I continue to get the error
"Mail could not be sent
The server for account "mac" returned the error. 5.7.8. Bad Username or password (Authentication failed..)" Your username/password or security settings may be incorrect. Would you like to try rentering your password"
I have validated my username and password and rentered them both.
I have emptied the outbox and retried but nothing works.
Thanks for the help.

Update - I now have it working.
am not really sure what exactly fixed it.
I changed a lot of things but my setup now has the following which I think fixed.
outgoing server - p06-smtp.mail.me.com
override default port checked - port now 587
on more options button changed it to "use incoming server info".

I have an iMac running Yosemite 10.10.1 & Outlook 2011 for Mac. For a while, sent emails went to a sent folder on the iMac so I have a collection of sent emails there. How can I move them to a sent box on my server so I can see them on other devices?

I have an iMac 3.2 GHz Intel Core i5 with 16 GB memory and 1.12 TB storage running Yosemite 10.10.1 & Outlook 2011 for Mac. For a while, sent emails went to a sent folder on the iMac so I have a collection of sent emails there. I have attempted to move those sent emails from the iMac to my email server (IMAP), but without success. Is there a way to move them to a sent box on my server so I can see them on other devices? Many thanks for any help you can provide.

Go to: Apple > System Preferences > Universal Access and in the Seeing tab make sure that the Display Enhance contrast: is set to Normal.
Alternatly, try holding the ⌃⌥⌘ (control command alt) keys and then pressing the , (comma) key a few times.

MS Outlook 2011 for Mac will no longer automatically send and receive email since upgrade to OS 10.9 Mavericks. Does anyone know of a solution?

I have been having trouble with Outlook 2011 for Mac since updating to OS 10.9 Marvericks. I have tried updating the database and identity. I can get email if a go to each account and try to download it. But email will not come automatically and can I send and receive all accounts. Does anyone have a solution? I do not want to lose my email, contacts and information.

I am also finding that searching in Mail for emails in this account is leading to false negative results. It's astonishing that I can search for an email I know is in the Inbox list yet not find it unless I scroll down to it manually and clicking it. Then it will show up in the results if I search again. I just did "rebuild" a day ago (have to do that every few days or so to get Outlook Exchange emails restored again anyway), so I doubt that this would fix the issue, but even if it did it's ridiculous... do I really have to abandon Mail and move to Microsoft Outlook on my mac to read my emails? Mail is currently FAILING to work for those of us who have to deal with Microsoft servers... which must be a huge # of customers, Apple.

Transfer emails from outlook 2011 for mac to Outlook 2010 for windows

Hi,
I want to transfer emails from outlook 2011 for mac to outlook 2010 for windows.
Outlook 2011 exports mails only in olm format and there is no option to import olm files in outlook 2010.
I can drag and drop emails from outlook 2011 to a finder folder which saves emails as eml files. How can import eml files into outlook 2010.
Please help

Hi,
Thank you for using
Microsoft Office for IT Professionals Forums.
Base on the research ,
We can try the steps below to add the registry sub key. This will open all .eml files that are in the file system using Outlook, including *.eml attachments on messages in OE/WLM. Any replies will be sent
using Outlook.
===========
Important This section, method, or task contains steps that tell you how to modify the
registry. However, serious problems might occur if you modify the registry incorrectly. Therefore, make sure that you follow these steps carefully. For added protection, back up the registry before you modify it. Then, you can restore the registry if a problem
occurs.
1.Type
regedit in the Search field on the Start menu or press
Windows Key+ R and enter it in the Run command.
2.Navigate to
HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Microsoft Internet Mail Message WLMail\shell\open\command
Or HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Microsoft Internet Mail Message\shell\open\command
3. Change the command line (here its "C:\Program Files (x86)\Windows Live\Mail\wlmail.exe" /eml:%1)
to the following line, exactly as shown below but correcting the path to Outlook.exe to match the path on your computer.
"C:\Program Files\Microsoft Office\Office14\OUTLOOK.EXE" /eml "%1"
Thanks for your understanding.
Sincerely
Rex Zhang
Please remember to mark the replies as answers if they help and unmark them if they provide no help.

How to preview the first 4 lines of an unopened email in my inbox for outlook 2011 for mac

how to turn on email preview in outlook 2011 for mac.
I had this done in outlook for PC but can't find how to do it on the mac.

Hi,
As far as I know, the message preview feature is not available in Outlook 2011 for Mac. Since this forum is for general questions and feedback related to Outlook for Windows, you can post a question in the Outlook for Mac forum to confirm this:
http://answers.microsoft.com/en-us/mac/forum/macoutlook?tab=Threads
Regards,
Steve Fan
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Outlook 2011 for MAC, how do I stop "to protect your privacy some pictures in this message were not downloaded" I've added to safe senders and added to contacts, it still happens with every single email

Outlook 2011 for MAC, how do I stop "to protect your privacy some pictures in this message were not downloaded" I've added to safe senders and added to contacts, it still happens with every single email

Ask on the Microsoft Mac forums since it's their software you have questions about..
http://answers.microsoft.com/en-us/mac

Outlook 2011 for Mac + Oracle Outlook Email Integration On Demand

Similar Messages

Maybe you are looking for