Outlook 2013 add-in will not stay enabled

Everytime Outlook 2013 (windows) closes the add-in for iCloud changes to disabled. The only way I can sync calendars etc, is to manually enable the iCloud Add-in EVERY TIME I open Outlook. What's up with that? It used to work perfectly. I have been through all the help screens and nothing works.

Hello EFBenzal
If you are using Windows 8.1, then check out the article below to resolve the issue of iCloud becoming disable within Outlook.
iCloud: Windows 8.1 disables iCloud updates in Outlook, or "The set of folders cannot be opened. The information store could not be opened" appears
http://support.apple.com/kb/TS5355
Regards,
-Norm G.

Similar Messages

Master Data Services Add-in will not stay enabled

Using Excel 2013 x64 with the 2012 MDS add-in.
The master data services add-in works but when I shut down Excel, the add-in is soft disabled and I have to re-enable it every time I start Excel. I've tried disabling everything and then just enable MDS and that doesn't help.
How can I troubleshoot this? I can't roll out 2013 to my users if this problem persists.

I have finally found a solution for this problem! Every time I opened Excel (unless I ran as administrator) I would have to activate the MDS add-in; this was time-consuming and annoying. It seems like there was no solution posted online anywhere! Well
after much aggravation, I have finally found a solution:
Fixing the Microsoft MDS Excel Add-In so it Stays Enabled
Press the Start button (Windows button)
In the search bar type “REGEDIT”
Open regedit.exe
A pop-up will ask permission for the Registry Editor to make changes to the computer, select Yes.
In the Registry Editor expand HKEY_CURRENT_USER
In the HKEY_CURRENT_USER folder, expand in the following order: Software -> Microsoft -> Office -> Excel -> Addins
Select Microsoft.MasterDataServices.ExcelAddIn
Double-click on LoadBehavior in the right panel
In the Edit Value popup, change the value to
Press OK
Exit the Registry Editor
The excel add-in should now be active anytime you open Excel. If multiple errors occur while using the add-in, the Load Behavior may change back to 0. If that occurs simply follow these steps so the add-in will be active when Excel starts up.
I hope this helps some of you avoid the long hours of trying to find a solution to this silly problem.
Cheers!
Tony

Creatve IR remote will not stay enabled (RM1500) SB audig

The RM500?remote control will not stay enabled in ENT. settings. After rebooting PC I have go to settings and enable it. Does anyone have any Ideas? Thanks.SBaudigy 4

@ Ok, 2.5 years later but here's the solution: in C:\Program Files (x86)\Creative\Shared Files\Module Loader\RC System there's a file called RCSystem.CFG
You can set default options here. You need to set:
RunAtStartUp=
SupportWinApp=
And there you go, it's enabled by default!

My Outlook 2013 calendar events will not sync up on my iPad

I have outlook 2013, the iCloud control center on my PC, an iCloud account and enabled all appropriate settings on my iPad (and iPhone 5c). I am able to see my calendar events in outlook and in my apple calendar on my PC and on my Macbook Pro, but am not able to see any of my OUTLOOK initiated calendar events on my iPhone or iPad. I have attempted to follow instructions about syncing using iTunes (which doesn't seem to really be an option anymore) as well as syncing via iCloud (but there doesn't really seem to be an option to add an account other than my apple account via iCloud accessed over the web).
Anyone else having the same issue? Anyone have any suggestions?

This article should provide you with some steps on where to start. http://support.apple.com/kb/HT1692?viewlocale=en_US

Add on will not stay installed

I have been having an issue with Firefox 20 not keeping add-ons installed. Namely, Ad Block Plus... it will install fine, but when I close the browser, the add-on is not installed anymore. I have to install it everytime I open the browser.

It is possible that there is a problem with the file(s) that store the extensions registry.
Delete the files extensions.* (e.g. extensions.sqlite, extensions.ini) and compatibility.ini in the Firefox profile folder to reset the extensions registry.
*https://support.mozilla.org/kb/Profiles
New files will be created when required.
See "Corrupt extension files":
*http://kb.mozillazine.org/Unable_to_install_themes_or_extensions
*https://support.mozilla.org/kb/Unable+to+install+add-ons
If you see disabled, not compatible, extensions in "Tools > Add-ons > Extensions" then click the Tools button at the left end side of the Search Bar ("Find Updates" button in older Firefox versions) to check if there is a compatibility update available.
If this hasn't helped then also try to delete the addons.sqlite file.
Which security software (firewall, anti-virus) do you have?
Some security software has virtualization or sandbox features that may cause problems by protecting and restoring files in the Firefox profile folder.
There are other things that need your attention.
Your system details list shows that you have two Flash plugins installed:
# Shockwave Flash 11.7 r700
# Shockwave Flash 11.6 r602
You should remove the older Flash 11.6 version
See "Manually uninstalling a plugin":
*https://support.mozilla.org/kb/Troubleshooting+plugins

Acrobat and Shockwave will not stay enabled.

Each time I boot up my pc, I have to enable Acrobat and Shockwave. Uninstalling and reinstalling these programs does not fix the problem. I run Windows 7 and IE 10.

Other add-ons remain enabled?
After you enable them, then restart IE10, do they remain enabled?
You do not accidentally start IE with no add-ons? (Just checking possibilities; something is disabling these add-ons.)

Reader add-on will not stay in IE 10

I recently upgraded from IE 9 to IE 10. I cannot open .pdf files in IE 10, although I can save them to my desktop and open them from there. Firefox opens .pdf files.
I went to manage add-ons in IE 10, and Reader was not there. I re-installed Reader, then opened IE 10 and Reader was in the add-ons. I tried, and failed, to open a .pdf file in IE 10, and got a pop-up that Reader was unable to update - looked in add-ons and Reader was gone again.
Running Windows 7, IE 10, Acrobat XI Pro, Reader 11.0.06

Is the Reader add-on also missing if you show 'All add-ons'?

Upgraded to latest Firefox version and ZOOM will not stay enabled on my Win 7 64 home.

After I upgraded to the latest version of Firefox on my PC, I could no longer view the small type on the pages (i.e. my Verizon General Message Email Account). I had to constantly use the ZOOM feature to bring up the size of the printed page and there was no way that I could "save" teh optimum viewing size (like I enjoyed previously). When I exited a page (i.e. INBOX) and returned, it defaulted to a very small type.
I tried to sue the RESTORE feature, but that did not help. I would exit the Browser and return, to no avail. The print size was always too small to view. Even here I have to ZOOM in order to see what I have typed.
PLEASE HELP !!!

'''I am an intermediate user when it comes to computers. I was overwhelmed to try and do the recommendations here. SO I kept going back in time until I was able to perform a System Restorm--AND THAT corrected the problem. I hope that solves the problem.
Thanks to Cor-el for your efforts.
n3kas'''

Firefox 11.0 Personas are not staying enabled after restart of FF11

After updating Firefox 10.0.2 to FF 11.0, both of my PC's personas that I have will not stay enabled after restarting FF 11.0. I have tried different personas on each PC and they also will not stay enabled after a restart of the browser. FYI, I am still using the same extensions that I had used in FF 10.0.2 and there all up to date in FF 11.0, it's just this persona issue that bug me big time.
I've tried all the Knowledge Base help suggestions, but none have worked.
Any one else having this issue? Any on have a fix that worked?
Help!

The installed personas and the currently selected persona is saved as a pref in the prefs.js file in the Firefox Profile Folder, so there may be a problem with that file.
See:
*http://kb.mozillazine.org/Preferences_not_saved
*https://support.mozilla.org/kb/Preferences+are+not+saved

In outlook 2013 Add-In, Adding dynamic menu to splitButton idMso="DialMenu" is working and the same code is not working in outlook 2010 Add-In.

In outlook 2013 Add-In, Adding dynamic menu to <splitButton idMso="DialMenu"> is working and the same code is not working in outlook
2010 Add-In. please let me know, if i am missing something. Below is the xml and screen shot
<contextMenu idMso="ContextMenuFlaggedContactItem">
<splitButton idMso="DialMenu">
<menu>
<dynamicMenu id="CallContactwithFreedomvoice
" label="CallContactwithFreedomvoice"
getContent="OnGetContenttest" insertAfterMso="Call"/>
</menu> </splitButton> </contextMenu>

Hi Narasimha prasad2,
Based on the description, the context menu for the flagged contact doen't work in Outlook. I am tring to rerpoduce this issue however failed.
I suggest that you check the state of the add-in first to see wether the add-in was loaded successfully.
Regards & Fei
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Outlook 2013 Free/Busy can not retrieve information

Currently have a problem with Outlook 2013 Free/Busy can not retrieve information.
All windows updates are installed.
Exchange 2007 is being used.
Problem started last week.
Already Tried without any progress:
1) Recreated profile (Fixed the issue for 1 week)
2) Cleanfreebusy ( No longer works for outlook 2013)
3) /Cleanreminders
4) Removed latest updates for outlook 10/02( As requested by Microsoft support, however we found users without this update installed, suffering from the problem)
5) Repaired OST file
6) Repaired Office 2013
Can anyone help it would be much appreciated?

Hi
As per the information and details provided by you, Outlook 2013 free/busy cannot retrieve information, please follow these steps: -
The user has never logged in
Before any free/busy information is available, the user must have at least a calendar. A calendar will not be created until a user logs into their account.
The option to publish at some location has been enabled in Calendar options
In all Outlook versions, the option to publish free/busy information must be unchecked. By default, this option is already unchecked.
This option is located under
Tools > Options > Preferences > Calendar Options > Free/busy Options.
Outlook is using cached browser information
Outlook Free/busy user HTTP, and therefore borrows information cached by Internet Explorer. It is required to clear the offline cache. This is located under
Tools > Internet Options > General. In the “Temporary Internet Files” section, choose the
“ Delete files” button.
Internet Explorer settings is not correct
AN Internet Explorer setting may prevent the .ics file from downloading via HTTPS. In Internet Exporer on the Outlook computer, go to
Tools > Internet Options > Advanced. In the Security section, the checkbox for “Do not save encrypted pages to disk” should be unchecked.
I hope this information will be helpful for you.
Thanks and regards
Shweta@G

I have updated to the new version of iPhoto but it will no longer let me edit text in the preset text boxes. The text is highlighted for a nanosecond but will not stay highlighted so I can amend it. Can anyone help me with this. Many thanks.

I have updated to the latest version of iPhoto. But now iPhoto will not let me amend the preset text in the text boxes.
the text is highlighted for a nano second but it will not stay highlighted so that I can add my own text.
can anyone help me with this issue.
Many thanks

You might try using the add-on 'NoSquint' which allows numerous zoom options specific to each page you visit & keeps your settings - https://addons.mozilla.org/en-US/firefox/addon/nosquint/
If you want to go back to 3.6x, you will find it here:
http://www.mozilla.com/en-US/firefox/all-older.html
In most cases you can simply "upgrade" (meaning downgrade) directly from the installation. It would be a good idea to save your passwords & bookmarks just to be on the safe side.

After updating to 10.10.3, now my Macbook Pro will not stay logged in. I log in after restarting, and it will stay logged in for 3-5 seconds then immediately log off and go back to the login screen. Any help?

After updating to 10.10.3, now my Macbook Pro 15" (mid-2014) will not stay logged in. I log in after restarting, and it will stay logged in for 3-5 seconds then immediately log off and go back to the login screen. Any help?
By the way, I also updated my Macbook Pro 17" (mid-2009) and it seems to be running fine, though I haven't tried to restart it and log in. I'm afraid I won't be able to get this one to work either if I do.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

Acrobat XI Outlook 2013 add-on crashes Outlook

Acrobat XI Outlook 2013 add-on crashes Outlook each time I try to convert an email to PDF,
I did not see a relevant answer to this specific problem in the forums.
Of course I can print an email to acrobat PDF but I believe a fix or an update from Adobe is overdue.
I had to disable the add-on in the meantime.
Otherwise PDF maker in the right click context menu works fine.
Windows 7 64 bit, Acrobat XI Pro 11.0.5
Anybody has an idea ?

Have you tried the following?
Launch Office 2013 as Administrator, i.e. right click on Office icon and select 'Run as Administrator'.
or
Try creating a new user account on Windows to see if the same issue occurs.

Power Map in Excel 2013 (Office 2013 Professional Plus) will not show up in ribbon

I have tried literally everything and nothing works.
I can download the preview version of the Powermap addin and it works.
But by default the add-in will not show up in the ribbon.
I uninstalled , reinstalled, re-ran SP1 of office 2013. double checked the load behaviour,
ran a repair.. nothing works.
Powerview displays fine, Bing Maps... just not Power Map

Hi Kenneth,
Since you are using Office 2013 Professional Plus, you can only use Power Map Preview for Excel 2013, which is an unsupported add-in. See:
https://support.office.com/en-in/article/Power-Map-for-Excel-82d65bd7-70c9-48a3-8356-6b0e82472d74
Regards,
Steve Fan
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Outlook 2013 add-in will not stay enabled

Similar Messages

Maybe you are looking for