Outlook 2013 and Lync 2013 suddenly cannot run at the same time

We recently switched to Office 365 and up until this month's Tuesday Patch Day, everything was working great. As soon as I installed the patches from 3/12/2013. Ever since then I've had the following issue:
Launch Outlook 2013
Launch Lync 2013
Get the following dialog box: "Outlook Data File: The file <filename> is in use and cannot be accessed. Close any application that is using this file, and then try again. You might need to restart your computer."
Click Ok to dismiss the dialog box. Everything seems to function normally.
About three minutes later I get the following dialog box: "We're sorry, but Outlook has run into an error that is preventing it from working correctly. Outlook will need to be closed as a result. Would you like us to repair now?"
Click Close. Everything seems to function normally.
Steps taken to attempt to a fix:
I deleted the Outlook profile and recreated it from scratch. No improvement.
I rebooted the machine. No improvement.
I repaired the Outlook data file. No improvement.
Other notes:
If I start Outlook 2013 by itself, it works fine and no dialog boxes.
If I start Lync 2013 by itself, it works fine and no dialog boxes.

Hi all,
I had the same problem as the original poster, and I fixed it using the method I'm about to describe. First, let me state that I am using a volume-license version of Office 2013 Standard, installed the conventional way ... we are not using the desktop
apps available with Office 365 plans E3+E4 or "Midsize Business".
I had originally installed Lync 2013 using a 'streaming' installer that you find by logging into the Office 365 Portal site -> Office 365 Settings -> Software -> Lync -> Install.
That installer does not work with the version of Office 2013 I'm using. I uninstalled Lync, and reinstalled using the links below:
(32-bit):
http://www.microsoft.com/en-us/download/details.aspx?id=35451
(64-bit):
http://www.microsoft.com/en-us/download/details.aspx?id=35450
The version of Lync that you choose (32-bit or 64-bit) has to match the version of Office 2013 you already have installed. Upon installing the 64-bit version of Lync at the URL above, the error message "Outlook
Data File: The file <filename> is in use and cannot be accessed." disappeared and Outlook and Lync now happily cooperate.

Similar Messages

FRM: 10270 Cannot attach the library when two forms run at the same time

I get the error message FRM: 10270 Cannot attach the library SYSLIB while opening menu BMENU but only when i try to open a second form while the first form is still running.
Both forms are working fine as long as they ar not running at the same time.
It seems like the second form opening does not have access to the FORMS60_PATH, because you can not open a third form because it can't find it.
All the forms anf libraries (plx)is in the FORMS60_PATH.
I am running developer_6i forms & reports on a HPUX 11i machine and I am trying to access them through jinitiator 1.3.1.9 on a XP machine.
Best regards
Macke

Thanks a lot for the tip. I used truss and realised that it found the library but was not allowed to open it. The kernel parameter maxfiles was set to low.
I increased it and everything works ok
BR
Marcus

Dreamweaver and Fireworks won't run at the same time

Recently, I've run into a problem where I cannot run Dreamweaver and Fireworks at the same time.
I have Dreamweaver CS4 & Fireworks CS4, which I can still run at the same time.
However when I run Dreamweaver CS5.5 and try to launch Fireworks CS5.1 I get a C++ Runtime error in FW CS5.1.
And when I run Dreamweaver CS6 and try to launch Fireworks CS6, Fireworks CS6 freezes before fully loading.
If I run DW CS6 and launch FW CS4, I can get them both to run together, but when I close FW4, DW CS6 crashes.
Any suggestions would most appreciated.
David

Historically, I've always kept prior versions installed because sometimes, albeit infrequently, I need to access extensions that aren't compatible with the newer versions of CS. Since I can run DW & Fireworks CS4 together, I'm inclined to leave them installed.
I've thought about uninstalling CS 5, but I don't think that would resolved my issue. I've already tried most of what's in the Adobe troubleshooting suggestions save for creating a new administrator account.
I think I'll hobble along with my current workarounds since I'll be migrating to a new computer very soon, which should acomplish what creating a new administrator account would. I'll probably limit the reinstall to CS 6 to eliminate any issues that might be related to having multiple versions installed, which in reality shouldn't be an issue because again, I've always done that successfully in the past.
Thanks for the suggestion just the same.

How to resolve the issue of DS 3.2 and BOE XI 3.1 running on the same PC.

How can I run both Business Objects Enterprise and Data Services Java app on a single PC?
I have installed BOXI 3.1 SP3 and Data Services 3.2 on my demo laptop window 7 64-bit enterprise.
I am having a issue of DS 3.2 and BOE XI 3.1 running on the same machine using Apache Tomcat." can't login DS"
Step 1. Installed BOE 3.1 first then DS 3.2 no problem logging to the CMS and Infoview Apache Tomcat/5.5
current URL: web app: http://sapdemo:8080/CmcApp/logon.faces
I can't login the but can't login DS data management console java app java tomcat apache web app Current URL: http://sapdemo:28080/DataServices/
Step 2: re-install DS keeping the same Apache Tomcat/5.5 directory under Business Objects Dir.
Recommended Solve:
How can I make both BOE and DS work using Java Web app works on a single machine?
What is the need to assign different ports 1 for BOE CMS and another DS admin console?
Should I install java tomcat apache web app in the different for BOE?
Thanks
Rod

Hi Rodney,
I would suggest you post this question into the Data Services / EIM Forum.
regards
Ingo Hilgefort

Can a vodcast and a photocast run at the same time ?.

Hi,
I would like have a video podcast play and a photocast run at the same time is this feasible?
Geoff

Since they're different apps and there's no way to sync something like that: no. Sounds like you could just do a video slideshow to me. That's supported by all major video creation apps.
-S

Do the Cache, CacheStore, and CacheLoader all need to run in the same JVM?

do the Cache, CacheStore, and CacheLoader all need to run in the same JVM?
Any help is appreciated.
Thanks.

they can be in differnt DP with no problem.
Now question:
1-MOH multicast/Unicast? (Multicast MOH ONLY support G711, so that could explain changing the DP fixnig the problem)
[You can create a DP/region for MOH if multicast to talk G711 to everybody and the problem will get fix]
Please Kudos/rate if this help!

How do I get my speakers and Fatal1ty HS-1000 USB to run at the same time?

I am having trouble running both my speakers and Fatal1ty HS-1000 USB headset at the same time. Sometimes I like to take off my Fatal1ty HS-1000 USB headset and listen to my music really loud with my 5.1 system, but now I would have to unplug the Fatal1ty HS-1000 USB headset from the back.
So when I play WoW I have to plug my Fatal1ty HS-1000 USB headset back in and go back and forth when I want to listen to music loud and play WoW.
I installed the the drivers with the audio panel.

Chocobo87 wrote:
I am having trouble running both my speakers and Fatal1ty HS-1000 USB headset at the same time. Sometimes I like to take off my Fatal1ty HS-1000 USB headset and listen to my music really loud with my 5.1 system, but now I would have to unplug the Fatal1ty HS-1000 USB headset from the back.
So when I play WoW I have to plug my Fatal1ty HS-1000 USB headset back in and go back and forth when I want to listen to music loud and play WoW.
I installed the the drivers with the audio panel.
It seems like you want output of audio on both the speaker and headset. I too have problem of always unpluggin and switching. Does anyone know if both can work. Can audio output be both in speakers and headset?

Getting 'Paint' and 'Sales History' to run at the same time

Hi,
Is this a matter of setting up a port for Paint and another for SH? Is there a limit to the number of OBI repositories that can be running at the same time?
Thanks!

Thanks.
Can two or more repositories exist in the same rpd file? Can Paint and SH be in the same rpd file and be used by seperate groups that access completely different data sources?
In our case, the dimensions and facts for glass used in a car are very different from the dimensions and facts for a car's transmission. There are similarities, true, but they are still very different.
So, in one rdp file can there be seperate presentation folders for Glass, Tires, Transmissions, Seats, Axil, Engine, Steering Wheels, Head Lights, and etc...
Each presentation folder would be used by different people. Each presentation folder would access different tables. The Glass Parts business will use the Glass presentation folder, the Axil Parts Guys will only use the Axil Presentation Folder, etc..
As always, thanks!

I have a mac book pro i7 2.00Ghz and 4Gb RAM. I want to run at the same time Omnisphere,Trilian and BFD 2. Will it work fine? Anybody that has some experience? Thanks

I have a mac book pro i7 2.00Ghz and 4Gb RAM. I want to run at the same time Omnisphere,Trilian and BFD 2. Will it work fine? Anybody that has some experience? Thanks

Well this is not a problem I have already bought one, my great worry is the processor and the memory..

Two Telnet read VI's running at the same time interfere with each other

I have a situation where multiple tests must test multiple UUT’s on the same computer. To send commands to and get responses from the UUT's I use a telnet session. The telnet read VI uses a semaphore. Therefore when two separate top level VI's are running, each calling the Telnet read VI, if one Top Level VI is using the Telnet Read VI the other Top Level VI waits for the first one to complete before it can use the Telnet Read VI. This VI is setup for reentrant execution but because of the semaphore it cannot truly be used as a reentrant function. This causes severe problems when trying to communicate with two different telnet sessions simultaneously.
In the past I have avoided this problem by compiling everything into an executable. Then each Top Level program runs completely independently with no interdependences. However, now I am implementing Teststand and I need to call the same Top Level VI's. I need to be able to get information into them and back out of them from Teststand. This means that I can no longer compile them into stand alone executables. I did compile each top level VI into its own Share DLL thinking that then each top level program would have its own library to call upon. This did not work. Even though both top level programs are compiled into their own DLL there is still interdependency when calling the telnet read VI. One program waits for the other to finish reading from its telnet connection before it can read from its own telnet connection. Since I have to continuously read from the telnet connection, sometimes for up to half and hour, the tests do not function simultaneously. How can I get around this? Is there a solution?
Josh
PS The Telnet Read VI I am refering to came with the Internet Toolset package. Attached is a copy of the VI I use to communicat with the UUT's.
Attachments:
GUI_Telnet_W-R_Auto.vi ‏64 KB

Sorry about the confusion.
The file I attached is in the hierarchy of two separate top-level VI's. The telnet connect is opened once and closed once in each top-level program. The ref number is then passed into and out of the VI that I attached. I use this VI to repeatedly send commands via telnet and wait for the appropriate responses. The telnet read VI is given a read line separator and reads from the telnet connection until it matches the read line separator with a text string read back from the telnet connection. If not match is found it times out and creates an error.
I am not sure how to provide an example of the overall scheme since the problem occurs when both top level VI's are compiled each into their own shared DLLs. Those DLLs are then call from Teststand and at some points they are both running at the same time on the same computer connected to two different UUT's.
The question I have is why does one DLL share functions with the other? When one DLL is using the telnet read VI the other DLL waits for the first one to finish with it before it can it use the telnet read VI. If they were both compiled separately each into their own DLL shouldn't they each have their own set of functions to call upon instead of having to share? I know that if the two top-level VI's are not compiled they cannot both execute the same sub-VI at the same time. The only way to get around this is to set the execution property on the sub-VI to reentrant.
I actually fixed the problem by setting the VI I attached and the Telnet Buffered Read.VI (called by Telnet Read.vi) execution properties to reentrant. However, I am still concerned about two separate DLLs sharing sub-VIs. Why does it do this?
Joshua

IPad charging in car and connection to CD changer unit at the same time

Hi all,
Firstly, this is my first post here, so apologies if my post is either considered rude or unto wards in any fashion. Apologies also if this question has been covered elsewhere - I have searched the forums to sone extent, but cannot guarantee that I haven't missed something!
I'm looking for a splitter cable for in-car use with the iPad.
The specifics of my car stereo are as such :
no bluetooth
No AUX either.
I have a CD Changer connect at the rear of the car head unit, to which is attached a factory installed cable. This cable is CD Changer plug for the car stereo end, going to 30-pin connector at the other end.
This is a perfect solution for my old iPod photo - it allows me to control the iPod via the car stereo, AND charge the iPod at the same time.
However...
I have an iPad 2 which I would like to use in place of the iPod photo. I wish to plug the iPod (Music app) into the car stereo, and use one of the GPS apps, AND charge the iPad 2 all at the same time.
There is not enough juice coming from the car stereo to allow me to do all this concurrently, as you will probably be aware. If my car journeys were short, I would not be too worried, but I often use the car for journeys that are longer than 10 hours. The iPad, with the GPS and iPod apps running at the same time, will not remain "alive" for this amount of time - the longest I've managed is about 6 and a half hours before the iPad runs out of juice.
So I'm looking for a splitter that I can slot into the dock connection of the iPad and will split into USB for the cigar lighter and into a 30 pin (female) that will go to the 30 pin (male) connector that runs to the CD Changer port on the car stereo.
In other words (and I hope this diagram works) :
                                                              IPad
                                                         USB.     30-pin (f)
                                                        /.                 30-pin (m)
                                            Cigar lighter.                CD Changer plug
I have looked everywhere on line, have contacted various cable suppliers (such as USBFever) but up 'till now I have had no joy.
Anyone have any ideas?
Thanks in advance.

Thanks, Rudegar, for your reply.
Unfortunately, I wouldn't know where to start, not being terribly technically minded. And I'm not sure that this would be an economic resolution - would this involve buying soldering irons etc.? And would I be able to be sure that I wouldn't mess something up, and cause overheating/other damage to the iPad itself?
Surely this must be a fairly common problem, however? I'm sure that I'm not the only one looking for such thing??
Anyone else have a solution?
Thanks.

Two processes running at the same time in Lookout

I have installed Lookout 5.0 with 200 I/O Points onto our server computer. The application of motion control is next to the 200 I/O points through OPC PMAC server/client. Now I would like to have a second process in the same server for trouble shooting and testing without stopping the motion control process. However, this second testing process could have also many I/O points through Serial and USB ports. I assume that the total amount of I/O points of both processes will be greater than 200.I prefer to have independent processes for control and testing because access levels. Can I have these two processes running at the same time when needed?

Hi,
From your description you are using a third party OPC server for the motion application. You could have a second Lookout process communicating with the same OPC server with no problems, as long as you do not exceed the number of I/O points your license supports.
Also, the process you are using for testing obviously could not overwrite datamembers (or registers if you will) that would interfere in the overall application, in other words you can test your application as long as you keep the coherency of the test.
So the answer would be, yes it is possible, however you are still limited to the number of I/O's your license supports... You may even consider upgrade the number of I/O's you have in your license.
Best Regards
Andre Oliveira

Multiple scripts running at the same time?

Is there a way to have multiple scripts successfully running at the same time?
At the moment if I start a second script while the first one is still running, the second one completes successfully but the first one stops. This seems to be because the first one is no longer the active document once the second one opens so can't continue.
Is there another way to script things like this so that multiple can run independently at the same time? You might ask why I'd want to run two at the same time and not just wait, but i've setup an asp.net web form front end and having problems if two people click the button around the same time.
I'm guessing this isn't going to be possible and i'm going to have to look for ways of doing this in asp.net instead and somehow queue the requests so you have to wait longer if the script is already running?
Thanks,
Andy

I'm
guessing this isn't going to be possible and i'm going to have to look
for ways of doing this in asp.net instead and somehow queue the requests
so you have to wait longer if the script is already running?
This is correct. The scripting interface to PS is single-threaded so you will need to queue up requests.

How many threads can be running at the same time

Hi!!
Dows anyone knows how many Threads can be running at the same time in the JVM.
I'm making a multi thread client-server app and I would like to know how much simultneous connections the JVM support. I'm using one Thread per connection.

Hi, thanks to all for your answers.
I think that I made the wrong question, as you said: "that means the number of threads currently created".
I'm worry about this because my application is already online (It's a mail server -SMTP and POP3 server using ORACLE for the users database- ) and some other user post in the "multi-tread forum" that almost any JVM can only have 700 threads created at the same time, and I've never heard or read anything about this.
what you mean with the stack space (memory??)
I'm using the JavaWebServer 2.0 and a servlet to start the main Thread.
Again Thanks to all for the answers but I think that the schapel answer is the one that solve my doubt...

Multiple Libraries for Video running at the same time on one PC

Hi Everyone -
I want to clarify this is for VIDEO files, not music for my 6 ATV's on the network.
Problem: I have well over 1000 VIDEOS in my iTunes Library, and I am wanting to have multiple libraries availible at the same time; not just whichever the computer has open.
We have several atv's on the network and I would like to take my video organization one step further; instead of scrolling forever in the atv menus for the video you want; I could make several libraries all availible at the same time.
Such as:
Kids Library
Workout Library
Parents Library
etc
This in turn would shrink the primary library and have less videos to sort by. I know how to create the Libraries, I just dont know how to have them all running at the same time.
Infastructure:
Windows 7 Ultimate with Drobo B800FS (16TB of storage) all connected to Cisco 3660 Gig switch with multiple atv's hardwired back.

iTunes can only open one library at a time. If you have multiple computers, or virtual machines, each could be serving a different library.
tt2

Outlook 2013 and Lync 2013 suddenly cannot run at the same time

Similar Messages

Maybe you are looking for