Outlook 2013 cannot connect to local Exchange 2013 server

Server name EXCHANGE: is Domain controller for (domainname.local), DNS server and Exchange 2013
Has UCC CA cert successfully installed for (exchange.domainname.com)
External Outlook connections, Web Outlook and autodiscover work fine.
local DNS points autodiscover.domain.com & exchange.domainname.com to internal IP
I have used the above configuration many time for Exch2010/Outlook 2010 and it works great.
PROBLEM: Outlook 2013 clients on a local domain member autoconfigure (through autodiscover) but report a certificate error that the names do not match. When I force the acceptance for the cert error the outlook13 account setups with an exchange server
of "BIG LONG GUID"@domainname.com which cannot resolve and outlook fails.
Please help..

Hi ,
I have recently installed the exchnage 2013 as follow
one CAS and Two mail box DAG
so I was facing similier issue outlook clients were not able not see the CAS
so here are the magic solution :
1-created SRV recored for autodiscover same as acbrown2010 done
above in his reply
2-created
A record for autodiscover and the IP same as CAS IP
3-created
an internal Certificate in CAS server "create a new certificate request " and
include all names such CAS , MB's , Autodiscover this step to avoid the warning message during outlook setup because self sign certificates in ex2013 not helping
after that I have tested the outlook and was working fine NO GUID and NO certificates warning

Similar Messages

Unable to connect to local Exchange 2013 server when opening Exchange Management shell

Hi Everyone
Yesterday evenything was working fine, and then this morning, I`m unable to establish a connection with the Exchange shell. I receive the following errors. Any help is appreciated.
 Welcome to the Exchange Management Shell!
Full list of cmdlets: Get-Command
Only Exchange cmdlets: Get-ExCommand
Cmdlets that match a specific string: Help *<string>*
Get general help: Help
Get help for a cmdlet: Help <cmdlet name> or <cmdlet name> -?
Show quick reference guide: QuickRef
Exchange team blog: Get-ExBlog
Show full output for a command: <command> | Format-List
Tip of the day #55:
Want to view the mounted status of all mailbox databases? Type:
Get-MailboxDatabase -Status | Format-Table Name, Server, Mounted
VERBOSE: Connecting to C-EXCH02.BLCLAB.CA.
New-PSSession : [c-exch02.blclab.ca] Connecting to remote server c-exch02.blclab.ca failed with the following error
message : The client cannot connect to the destination specified in the request. Verify that the service on the
destination is running and is accepting requests. Consult the logs and documentation for the WS-Management service
running on the destination, most commonly IIS or WinRM. If the destination is the WinRM service, run the following
command on the destination to analyze and configure the WinRM service: "winrm quickconfig". For more information, see
the about_Remote_Troubleshooting Help topic.
At line:1 char:1
+ New-PSSession -ConnectionURI "$connectionUri" -ConfigurationName Microsoft.Excha ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 + CategoryInfo : OpenError: (System.Manageme....RemoteRunspace:RemoteRunspace) [New-PSSession], PSRemotin
 gTransportException
 + FullyQualifiedErrorId : CannotConnect,PSSessionOpenFailed
VERBOSE: Connecting to C-EXCH02.BLCLAB.CA.
New-PSSession : [c-exch02.blclab.ca] Connecting to remote server c-exch02.blclab.ca failed with the following error
message : The client cannot connect to the destination specified in the request. Verify that the service on the
destination is running and is accepting requests. Consult the logs and documentation for the WS-Management service
running on the destination, most commonly IIS or WinRM. If the destination is the WinRM service, run the following
command on the destination to analyze and configure the WinRM service: "winrm quickconfig". For more information, see
the about_Remote_Troubleshooting Help topic.
At line:1 char:1
+ New-PSSession -ConnectionURI "$connectionUri" -ConfigurationName Microsoft.Excha ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 + CategoryInfo : OpenError: (System.Manageme....RemoteRunspace:RemoteRunspace) [New-PSSession], PSRemotin
 gTransportException
 + FullyQualifiedErrorId : CannotConnect,PSSessionOpenFailed
VERBOSE: Connecting to C-EXCH01.BLCLAB.CA.
New-PSSession : [c-exch01.blclab.ca] Connecting to remote server c-exch01.blclab.ca failed with the following error
message : The client cannot connect to the destination specified in the request. Verify that the service on the
destination is running and is accepting requests. Consult the logs and documentation for the WS-Management service
running on the destination, most commonly IIS or WinRM. If the destination is the WinRM service, run the following
command on the destination to analyze and configure the WinRM service: "winrm quickconfig". For more information, see
the about_Remote_Troubleshooting Help topic.
At line:1 char:1
+ New-PSSession -ConnectionURI "$connectionUri" -ConfigurationName Microsoft.Excha ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 + CategoryInfo : OpenError: (System.Manageme....RemoteRunspace:RemoteRunspace) [New-PSSession], PSRemotin
 gTransportException
 + FullyQualifiedErrorId : CannotConnect,PSSessionOpenFailed
VERBOSE: Connecting to C-EXCH02.BLCLAB.CA.
New-PSSession : [c-exch02.blclab.ca] Connecting to remote server c-exch02.blclab.ca failed with the following error
message : The client cannot connect to the destination specified in the request. Verify that the service on the
destination is running and is accepting requests. Consult the logs and documentation for the WS-Management service
running on the destination, most commonly IIS or WinRM. If the destination is the WinRM service, run the following
command on the destination to analyze and configure the WinRM service: "winrm quickconfig". For more information, see
the about_Remote_Troubleshooting Help topic.
At line:1 char:1
+ New-PSSession -ConnectionURI "$connectionUri" -ConfigurationName Microsoft.Excha ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 + CategoryInfo : OpenError: (System.Manageme....RemoteRunspace:RemoteRunspace) [New-PSSession], PSRemotin
 gTransportException
 + FullyQualifiedErrorId : CannotConnect,PSSessionOpenFailed
VERBOSE: Connecting to C-EXCH01.BLCLAB.CA.
New-PSSession : [c-exch01.blclab.ca] Connecting to remote server c-exch01.blclab.ca failed with the following error
message : The client cannot connect to the destination specified in the request. Verify that the service on the
destination is running and is accepting requests. Consult the logs and documentation for the WS-Management service
running on the destination, most commonly IIS or WinRM. If the destination is the WinRM service, run the following
command on the destination to analyze and configure the WinRM service: "winrm quickconfig". For more information, see
the about_Remote_Troubleshooting Help topic.
At line:1 char:1
+ New-PSSession -ConnectionURI "$connectionUri" -ConfigurationName Microsoft.Excha ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 + CategoryInfo : OpenError: (System.Manageme....RemoteRunspace:RemoteRunspace) [New-PSSession], PSRemotin
 gTransportException
 + FullyQualifiedErrorId : CannotConnect,PSSessionOpenFailed
Failed to connect to an Exchange server in the current site.
Enter the server FQDN where you want to connect.:
VERBOSE: Connecting to .
New-PSSession : Cannot bind parameter 'ConnectionUri'. Cannot convert value
"http:///powershell?serializationLevel=Full;ExchClientVer=15.0.516.32;clientApplication=ManagementShell;TargetServer="
to type "System.Uri". Error: "Invalid URI: The hostname could not be parsed."
At line:1 char:30
+ New-PSSession -ConnectionURI "$connectionUri" -ConfigurationName Microsoft.Excha ...
+ ~~~~~~~~~~~~~~~~
 + CategoryInfo : InvalidArgument: (:) [New-PSSession], ParameterBindingException
 + FullyQualifiedErrorId : CannotConvertArgumentNoMessage,Microsoft.PowerShell.Commands.NewPSSessionCommand
[PS] C:\Windows\system32>
Ernie Prescott
Updated information.
I can succussfully connect to the exchange powershell from a remote computer, using this method.
$Session = New-PSSession -ConfigurationName Microsoft.Exchange -ConnectionUri
http://<FQDN of Exchange 2013 Client Access server>/PowerShell/ -Authentication Kerberos
Import-PSSession $Session
So the problem is localised on the server.
Regards

Hi
Try the steps for Error 1 on this link
http://www.petenetlive.com/KB/Article/0000477.htm
Hope it will help
Cheers
If you have any feedback on our support, please click
here
Zi Feng
TechNet Community Support

Cannot connect to an Exchange account in Outlook 2013 using "Microsoft Exchange Server or Compatible Service"

Dear All,
I cannot connect to my Exchange account in Outlook 2013 using "Microsoft Exchange Server or Compatible Service".
First I would like to present my network environment, I have 4 physical servers;
The first one is holding the Domain Controller 1, IP@: 192.168.1.10
The second server is holding the additional Domain Controller which it is DC2, IP@: 192.168.1.11
The third server is holding the Exchange 2013 Mailbox, IP@: 192.168.1.15
And the last server is holding the Exchange 2013 CAS-HT, IP@: 192.168.1.16
I am doing the steps below:
1-Creating a new profile in outlook and start configuring the exchange account by entering the IP address of the Exchange-CAS Server, 192.168.1.16
2-entering the account name: [email protected]
3-Go to "More Settings" > "Connection" > "Connect to Microsoft Exchange using HTTP" > and entering the "Exchange Proxy Settings"
4-type the exchange CAS Server URL, https://192.168.1.16
5-Check the "Connect using SSL Only"
6-Authentication Settings: "NTLM Authentication", and pressing Apply
7-When I press the "Check Name" button, a message occurred> "The action cannot be completed. The connection to Microsoft Exchange is unavailable. Outlook must be online or connected to complete this action".
8-I go back to the "Exchange Proxy Settings" and I Uncheck the "Connect using SSL Only" and pressing Apply
9-i press the "Check Name" Button, a small window occurred to enter a Username and Password, so I enter the Administrator username and the administrator password and pressing "OK", but nothing is changed, I tried to enter my
username and password in the small window and I still got the same result.
I cannot verify the account name and I cannot complete the process.
I appreciate you kind assistance.

Hi,
To narrow down the cause, I’d like to recommend the following troubleshooting:
1. Try to login the test account through OWA.
2. Check the Autodiscover settings: get-clientaccessserver |fl autodiscoverserviceinternaluri
3. Check the result of directly accessing the following URL:
https://autodiscover.domain.com/autodiscover/autodiscover.xml
Thanks,
Angela
Angela Shi
TechNet Community Support

How do i connect manually to Exchange 2013 from Outlook 2007/2010 in another forest?

Hello All,
I have a source organization: Windows 2003 domain + Exchange 2010 SP3 + smtp domain acme.com
Target organization: Winows 2012 R2 domain + Exchange 2013 CU3 + smtp domain acme.com
We are migrating to target organization.
I want to connect Outlook 2007/2010 to their target mailbox (Exchange 2013) from a machine which is joined to Source DOmain.
I couldn't use autodiscover, because as the machine is joined to source domain, autodiscover it's mapping to Exchange 2010.
It only works when I machine is joined to target domain.
Any idea how to connect manually to eXCHANGE 2013 mailbox from a machine which is joined to source domain?
Regards
José Osorio

Hi,
Firstly, I’d like to explain, Autodiscover service can be used cross forest:
1. the two forests must be trusted.
2. configure a mail contact in the original forest.
For more information, please refer to the partition named how to configure the Autodiscover service for cross-forest moves in the following article:
http://technet.microsoft.com/en-us/library/jj591328(v=exchg.141).aspx#BKMK_ConfigureForCrossForestMoves
Thanks,
Angela Shi
TechNet Community Support

Outlook 2010/2013 clients, outside of our main office, can't connect to our Exchange 2010 server

Hi,
Our remote users had been connecting to our Exchange server at our office since the Exchange server was installed in 2011.
Starting last Wednesday, Outlook 2010/2013 clients, outside of our main office, can't connect to our Exchange 2010 server. Outlook kept asking for a username and a password. At the same time, entries of Event 4625 were generated on the Event
log on out Exchange server.
Events 4625 has the following properties, "Logon Type: 3", "Failure Reason: An Error occured during Logon.", "Status: 0xc000006d", "Logon Process: NtLmSsp", and "Authentication Package: NTLM".
By the way, I had used a laptop to test this problem. Its Outlook work fine ion the main office, but it won't work outside of our office.
Does anyone have any idea?
Thanks.
Johnnie :(
Johnnie

http://blogs.technet.com/b/rmilne/archive/2015/03/17/update-015_2d00_027-revised-_2800_3002657_2900_.aspx
For additional people reading this thread, please update to v2 of that update.
Cheers,
Rhoderick
Microsoft Senior Exchange PFE
Blog:
http://blogs.technet.com/rmilne
Twitter:   LinkedIn:
  Facebook:
  XING:
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

Exchange 2013 user cann't access exchange 2013 public folder

Hi, during the coexistence exchange 2007 and exchange 2013, outlook is unable to access public folder of exchange 2007 from exchange 2013, I've install CU2 for exchange 2013 and also set authentication to Ntlm, but also failed. please help to look into this
problem, thanks.
belows are information about outlook anywhere in our exchange.
exchange 2007：(primary site)shmail04,shmail05,shmail06; (DR site)drpmail05,drpmail06
exchange 2013：(primary site)shcas01,shcas02; (DR site)wxcas01
Identity                         : SHCAS01\Rpc (Default Web Site)
InternalHostname                : infor.tdw.com
InternalClientAuthenticationMethod : Ntlm
InternalClientsRequireSsl       : True
ExternalHostname                : infor.tdw.com
ExternalClientAuthenticationMethod : Ntlm
ExternalClientsRequireSsl       : True
IISAuthenticationMethods          : {Ntlm}
Identity                         : SHCAS02\Rpc (Default Web Site)
InternalHostname                : infor.tdw.com
InternalClientAuthenticationMethod : Ntlm
InternalClientsRequireSsl       : True
ExternalHostname                : infor.tdw.com
ExternalClientAuthenticationMethod : Ntlm
ExternalClientsRequireSsl       : True
IISAuthenticationMethods          : {Ntlm}
Identity                         : WXCAS01\Rpc (Default Web Site)
InternalHostname                : infor.tdw.com
InternalClientAuthenticationMethod : Ntlm
InternalClientsRequireSsl       : True
ExternalHostname                : infor.tdw.com
ExternalClientAuthenticationMethod : Ntlm
ExternalClientsRequireSsl       : True
IISAuthenticationMethods          : {Ntlm}
Identity                         : SHMAIL04\Rpc (Default Web Site)
InternalHostname                :
InternalClientAuthenticationMethod : Ntlm
InternalClientsRequireSsl       : False
ExternalHostname                : legacy.tdw.com
ExternalClientAuthenticationMethod : Ntlm
ExternalClientsRequireSsl       : True
IISAuthenticationMethods          : {Ntlm}
Identity                         : SHMAIL05\Rpc (Default Web Site)
InternalHostname                :
InternalClientAuthenticationMethod : Ntlm
InternalClientsRequireSsl       : False
ExternalHostname                : legacy.tdw.com
ExternalClientAuthenticationMethod : Ntlm
ExternalClientsRequireSsl       : True
IISAuthenticationMethods          : {Ntlm}
Identity                         : SHMAIL06\Rpc (Default Web Site)
InternalHostname                :
InternalClientAuthenticationMethod : Ntlm
InternalClientsRequireSsl       : False
ExternalHostname                : legacy.tdw.com
ExternalClientAuthenticationMethod : Ntlm
ExternalClientsRequireSsl       : True
IISAuthenticationMethods          : {Ntlm}
Identity                         : DRPMAIL05\Rpc (Default Web Site)
InternalHostname                :
InternalClientAuthenticationMethod : Ntlm
InternalClientsRequireSsl       : False
ExternalHostname                : legacy.tdw.com
ExternalClientAuthenticationMethod : Ntlm
ExternalClientsRequireSsl       : True
IISAuthenticationMethods          : {Ntlm}
Identity                         : DRPMAIL06\Rpc (Default Web Site)
InternalHostname                :
InternalClientAuthenticationMethod : Ntlm
InternalClientsRequireSsl       : False
ExternalHostname                : legacy.tdw.com
ExternalClientAuthenticationMethod : Ntlm
ExternalClientsRequireSsl       : True
IISAuthenticationMethods          : {Ntlm}

Hi,
I have found an article said that we need to set the external host name the same. See more details in the following link:
http://blogs.technet.com/b/mspfe/archive/2013/10/21/upgrading-to-on-premises-exchange-server-2013.aspx
To allow your Exchange 2013 Client Access server to redirect connections to your Exchange 2007 servers, you must enable and configure
Outlook Anywhere on all of the Exchange 2007 servers in your organization. If some Exchange 2007 servers in your organization are already configured to use Outlook Anywhere, their configuration must also be updated to support Exchange 2013.
The following configuration is set on each Exchange 2007 server:
The Outlook Anywhere external URL is set to the external hostname of the Exchange 2013 server.
Sent By
Silver

After lion 10.7.3 update messed my mac had to restore from time machine now Outlook won't connect with microsoft exchange, any idea?

after lion 10.7.3 update messed my mac had to restore from time machine now Outlook won't connect with microsoft exchange, any idea?

I've had a similar problem. On my first boot up after installing 10.7.4, Firefox would not open. Crashed every time. Safari was not affected. I have no idea if it was related to the flash plugin, but I did install a the latest version of that a couple of weeks ago.
Here's what fixed it: a second boot up.

Cannot Connect to local host

from the xserv where i am setting up a website i cannot access local host which is preventing me from setting up phpmyadmin config file. I open safari and type in http://localhost/ and i get the error message cannot connect to local host. I can access the server using the ip (no domain setup yet). I am a novice at setting up web serves in the mac/apache environment so i may have missed a simple step somewhere. Any help would be appreciated.

Hi, and a warm welcome to the forums!
No expert here, but have you tried http://127.0.0.1 ?
Might get better help in the xserve, or Server forums here.

DUPLICATE DB : ORA-17629: Cannot connect to the remote database server

[oracle@ora11g1 ~]$ export ORACLE_SID=sales
[oracle@ora11g1 ~]$ rman target sys/sales@sales
Recovery Manager: Release 11.2.0.1.0 - Production on Wed Jun 5 13:00:15 2013
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
connected to target database: SALES (DBID=690066655)
RMAN> connect auxiliary sys/salestby2@salestby2
connected to auxiliary database: SALES (not mounted)
RMAN> DUPLICATE TARGET DATABASE FOR STANDBY FROM ACTIVE DATABASE SPFILE
2> SET DB_NAME= 'sales'
3> SET DB_UNIQUE_NAME= 'salestby2'
4> SET control_files='/u02/oradata/salestby2/control01.ctl','/u02/oradata/salestby2/control02.ctl'
5> SET DB_FILE_NAME_CONVERT='/u02/oradata/sales/','/u02/oradata/salestby2/'
6> SET LOG_FILE_NAME_CONVERT='/u02/oradata/sales/','/u02/oradata/salestby2/';
Starting Duplicate Db at 05-JUN-13
using target database control file instead of recovery catalog
allocated channel: ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: SID=20 device type=DISK
contents of Memory Script:
backup as copy reuse
targetfile '/u01/app/oracle/product/11.2.0/dbhome_1/dbs/orapwsales' auxiliary format
'/u01/app/oracle/product/11.2.0/dbhome_1/dbs/orapwsalestby2' targetfile
'/u01/app/oracle/product/11.2.0/dbhome_1/dbs/spfilesales.ora' auxiliary format
'/u01/app/oracle/product/11.2.0/dbhome_1/dbs/spfilesalestby2.ora' ;
sql clone "alter system set spfile= ''/u01/app/oracle/product/11.2.0/dbhome_1/dbs/spfilesalestby2.ora''";
executing Memory Script
Starting backup at 05-JUN-13
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=58 device type=DISK
RMAN-03009: failure of backup command on ORA_DISK_1 channel at 06/05/2013 13:05:26
ORA-17629: Cannot connect to the remote database server
ORA-17627: ORA-01017: invalid username/password; logon denied
ORA-17629: Cannot connect to the remote database server
continuing other job steps, job failed will not be re-run
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 06/05/2013 13:05:27
RMAN-03015: error occurred in stored script Memory Script
RMAN-03009: failure of backup command on ORA_DISK_1 channel at 06/05/2013 13:05:27
ORA-17629: Cannot connect to the remote database server
ORA-17627: ORA-01017: invalid username/password; logon denied
ORA-17629: Cannot connect to the remote database server

Welcome to the oracle forums!
Please take some time to go through [url https://forums.oracle.com/forums/ann.jspa?annID=1535]FAQ PAGE
Always post 4 digit oracle version and OS details.
Post any query out put between \ \ tags
Mark your questions as answered if you get the answer
Password of SYS user on primary and standby must be same.Copy the password file from primary to standby server
scp $ORACLE_HOME/dbs/orapwv112 <oracle_user@auxiliary_host>:/u01/app/oracle/product/11.2/dbs/orapwdupv112

Please Help!!! 'iTunes cannot connect to iphone update software server'

I cannot 'Restore' iPhone 3G to pass on to my fiance, after she kindly allowed me to get a new iPhone4 because iTunes 'cannot connect to iphone update software server'. I have tried both our laptop and desktop - both connecting to the internet fine - but neither will connect to the iTunes store nor update servers!!
Not sure what to try next, have tried setting up new user to no avail.
I have followed the support guidance and I am not connected through proxy.
Diagnostics reported as follows:
Microsoft Windows XP Home Edition Service Pack 3 (Build 2600)
Dell Inc. Dell DV051
iTunes 9.2.1.5
QuickTime 7.6.6
FairPlay 1.8.20
Apple Application Support 1.3
iPod Updater Library 9.2d4
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 3.1.0.62
Apple Mobile Device Driver 1.49.0.0
Bonjour 2.0.2.0 (214.3)
iTunes Serial Number 098625257EFAC14A
Current user is an administrator.
The current local date and time is 2010-07-25 12:16:28.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Video Display Information
Intel(R) 82915G/GV/910GL Express Chipset Family
** External Plug-ins Information **
No external plug-ins installed.
** Network Connectivity Tests **
Network Adapter Information
Adapter Name: {F45A9B15-8BE6-4964-8534-71947B51A91B}
Description: Intel(R) PRO/100 VE Network Connection - Packet Scheduler Miniport
IP Address: 192.168.1.77
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.1
DHCP Enabled: No
DHCP Server: 255.255.255.255
Lease Obtained: Thu Jan 01 00:00:00 1970
Lease Expires: Thu Jan 01 00:00:00 1970
DNS Servers: 192.168.1.1
192.168.1.1
Active Connection: LAN Connection
Connected: Yes
Online: Yes
Using Modem: No
Using LAN: Yes
Using Proxy: No
SSL 3.0 Support: Enabled
TLS 1.0 Support: Enabled
Firewall Information
Windows Firewall is on.
iTunes is enabled in Windows Firewall.
Connection attempt to Apple web site was successful.
Connection attempt to iTunes Store was successful.
Secure connection attempt to iTunes Store was successful.
Secure connection attempt to iPhone activation server was successful.
Last successful store access was 2010-07-25 10:25:45.
** Device Connectivity Tests **
iPodService 9.2.1.5 is currently running.

Right, I'm going to try something, if this works, then this'll probably fix a lot of iTunes problems.
1: Make sure your whole iTunes database is backed up.
2: Uninstall iTunes, then run "Revo Uninstaller", this will remove ALL traces of iTunes from you computer, not your library.
I've found out that when un-installing or re-installing over a previous version of iTunes will carry over some problems from previous versions, or even create problems. Registry leftovers can be a problem also. Completely removing iTunes using "Revo Uninstaller" then re-installing will have the same effect as installing iTunes from a fresh OS install. Typically iTunes should be problem free when installed totally fresh.
3: Re-install the correct version of iTunes fresh and try again.

Can't start server -- Fatal error: Cannot connect to user group ldap server

After installing iCS 2.1, iCS 2.1p1, and iCS 2.1p3, a user will receive the
following error message when trying to start the server:

Fatal error: Cannot connect to user group ldap server.

In addition, the Directory Server access logs will contain the following
entry:

-0400] conn=125 op=1 SRCH base="dc=ldgw-llc,dc=com" scope=2
filter="(objectclass=People)"
In the server.conf file,
check the local.enduseradmindn
parameter. The parameter
should appear as follows:

uid=admin,ou=Administrators,ou=TopologyManagement,o=NetscapeRoot

If the parameter contains
"calmaster" or any user
other than "admin,"
change it to match the line above.

Hi,
I am getting the same error, kindly let me know how did you solved this problem
Thanks
Ahmad

I cannot update my ipad2 to ios5. Updating through iTunes on pc Windows Vista, Error message reads "cannot connect to iPad Software Update Server. Tried resetting network settings, still not connecting. Tried updating iTunes, still not connecting.

I cannot update my ipad2 to ios5. Updating through iTunes on pc Windows Vista, Error message reads "cannot connect to iPad Software Update Server. Tried resetting network settings, still not connecting. Tried updating iTunes, still not connecting.

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
 Cheers, Tom

TS3276 I cannot connect to my outgoing email server on my macBook pro, yet I can, for the same email account on my iPad. Also I can send emails from the other email account I have on my MacBook...really confused can anyone help?

I cannot connect to my outgoing email server on my macBook pro, yet I can, for the same email account on my iPad. Also I can send emails from the other email account I have on my MacBook...really confused can anyone help?

Sometimes deleting the account and then re-creating it can solve this issue
Write down all the information in accounts before doing this
Highlight the account on the left and click the minus button
Then click the plus button to add the new account and follow the prompts

My phone wont back up or sync to itunes 10.6. i have a windows 7 32 bit laptop. i have tried updating the ios and receive the message saying it cannot connect to the iphone update server please check network connection. any help

have a iphone 4. i have downloaded the latest version of itunes to update the ios. I am having problems with the back up and sync and also the update. the update error message is coming up saying it cannot connect to the iphone update server. I am useing a windows 7 32 bit laptop. I have also reset my phone to factory settings. Would taking it to one of the stores and they would do it for me??
any help will be great thank you

All I can tell you is that I am having the exact same problem with an iPod Touch and that I was running iTunes 9.2.1.5 at the time it happened. Upgraded to 10.0.0.68 hoping that it might help, but no joy.
I don't want to do a restore just now since the Touch seems to be working fine. Restore will have to wait until I have plenty of free time in case something goes wrong.

Cannot connect to the specified SQL Server instance

I am trying to install Microsoft System Center 2012 R2 Virtual Machine Management.
I am getting the following error:
Setup cannot connect to the specified SQL Server instance.
Ensure that the server name, isntance name, and, if speceified, port number are correct. If you are installing VMM remotely, ensure that remote connections are set up correctly, and then try Setup again.
I have installed the
Microsoft® SQL Server® 2008 R2 Command Line Utilities
but have not set up any SQL Server instances.
how should i proceed?
Edit:
The followign fields are configured:
Server Name: The name of the machine i am using
Port: <empty>
Use the following credentials <NOT ticked>
Instance name <empty> (the drop down is empty)
New Database <Ticked> : VirtualManagerDB

Is SQL server is properly installed on the system?
Are you able to connect with SQL server instance?
As per the given details looks, only client utilities installed and trying to create the database which needs SQL server.
Make sure you are able to connect with the "ServerName\InstanceName,PortNumber" and hope installing the system as per below article:
http://technet.microsoft.com/en-us/library/gg610656.aspx
Hope it help!
Please click the Mark as answer button and vote as helpful if this reply solves your problem

Outlook 2013 cannot connect to local Exchange 2013 server

Similar Messages

Maybe you are looking for