Outlook 2013 client, not in domain, can't connect to the Exchange 2013 server.

Hello everyone,
A colleague and me are in the process of rebuilding our Hosted Exchange servers. Everything is working perfectly except for the local Outlook 2013 clients. They are not in the domain but in the same network (through VLANs) as our Exchange server, and still
they can't connect to Exchange without the use of Outlook anywhere. If we use Outlook Anywhere, it connects perfectly. If I ping the Exchange servers (1 CAS, 2 MBX servers) I get response with the right IP addresses.
We've tried to create a new profile, this goes without problems. We enter the FQDN (or IP address) of CAS server and the required usersname, and the FQDN gets resolved to the correct MBX server where the mailbox resides on. We complete the whole wizard and
then start Outlook. We then get the error that Outlook can't logon to the Exchange server.
Is this an authentication setting that is wrong or do we need to use Outlook Anywhere if the PC is not in the same domain as the Exchange server?
Thanks in advance!

Hi,
Agree with Martina, all Outlook clients use RPC over HTTP to connect to Exchange 2013. if the server version is Exchange 2013 SP1, only Outlook 2013 SP1 use MAPI over HTTP to connect to server after we enable the protocol MAPI over HTTP.
If you have any question, please feel free to let me know.
Thanks,
Angela Shi
TechNet Community Support

Similar Messages

  • Outlook 2013 client, not in domain, can't connect to the Exchange 2010 server

    Good Aftermoon,
    Having issues it seems getting to the right forum but here is what I have. Currently we are running an Exchange 2010 server. OWA is configured and I am not having any issues with people connecting through it. The issue I am having is that any user that tries
    to connect through Outlook 2013 gets an error message about the proxy server and then a certificate error. I have run the tests through the toolbox and get the following results. 
    Attempting to test potential Autodiscover URL https://autodiscover.westmoreland-county.org:443/Autodiscover/Autodiscover.xml
    Testing of this potential Autodiscover URL failed.
    Additional Details
    Elapsed Time: 694 ms.
    Test Steps
    Attempting to resolve the host name autodiscover.westmoreland-county.org in DNS.
    The host name resolved successfully.
    Additional Details
    IP addresses returned: 69.89.25.150
    Elapsed Time: 284 ms.
    Testing TCP port 443 on host autodiscover.westmoreland-county.org to ensure it's listening and open.
    The port was opened successfully.
    Additional Details
    Elapsed Time: 164 ms.
    Testing the SSL certificate to make sure it's valid.
    The SSL certificate failed one or more certificate validation checks.
    Additional Details
    Elapsed Time: 245 ms.
    Test Steps
    The Microsoft Connectivity Analyzer is attempting to obtain the SSL certificate from remote server autodiscover.westmoreland-county.org on port 443.
    The Microsoft Connectivity Analyzer successfully obtained the remote SSL certificate.
    Additional Details
    Remote Certificate Subject: CN=*.bluehost.com, OU=PositiveSSL Wildcard, OU=Domain Control Validated, Issuer: CN=PositiveSSL CA 2, O=COMODO CA Limited, L=Salford, S=Greater Manchester, C=GB.
    Elapsed Time: 201 ms.
    Validating the certificate name.
    Certificate name validation failed.
     <label for="testSelectWizard_ctl12_ctl06_ctl00_ctl00_ctl01_ctl02_ctl01_tmmArrow">Tell
    me more about this issue and how to resolve it</label>
    Additional Details
    Host name autodiscover.westmoreland-county.org doesn't match any name found on the server certificate CN=*.bluehost.com, OU=PositiveSSL Wildcard, OU=Domain Control Validated.
    Elapsed Time: 1 ms.
    Attempting to contact the Autodiscover service using the HTTP redirect method.
    The attempt to contact Autodiscover using the HTTP Redirect method failed.
    Additional Details
    Elapsed Time: 234 ms.
    Test Steps
    Attempting to resolve the host name autodiscover.westmoreland-county.org in DNS.
    The host name resolved successfully.
    Additional Details
    IP addresses returned: 69.89.25.150
    Elapsed Time: 14 ms.
    Testing TCP port 80 on host autodiscover.westmoreland-county.org to ensure it's listening and open.
    The port was opened successfully.
    Additional Details
    Elapsed Time: 83 ms.
    The Microsoft Connectivity Analyzer is checking the host autodiscover.westmoreland-county.org for an HTTP redirect to the Autodiscover service.
    The Microsoft Connectivity Analyzer failed to get an HTTP redirect response for Autodiscover.
    Additional Details
    The URL specified in the location HTTP header was not HTTPS. URL: http://autodiscover.bluehost.com/Autodiscover/Autodiscover.xml
    HTTP Response Headers:
    Keep-Alive: timeout=10, max=500
    Connection: Keep-Alive
    Content-Length: 356
    Content-Type: text/html; charset=iso-8859-1
    Date: Wed, 03 Dec 2014 18:10:08 GMT
    Location: http://autodiscover.bluehost.com/Autodiscover/Autodiscover.xml
    Server: Apache
    Elapsed Time: 135 ms.
    Our setup currently our domain is being hosted and the web master has control of domain settings. 
    I am fairly new to the Excchange Server world so any suggestions that you may have as to how I can resolve this would be great. 
    Bill

    Hi Bill
    Thank you for your pos.
    You can use the following command to check whether you have purchased the certificate of audiscovery.westmoreload-country.org in your organization:
    Get-ExchangeCertificate –server CASServerName | fl
    For example: you want to return all certificates stored on the Client Access server named ClientAccess01, you will type the follow command in EMS.
    Get-ExchangeCertificate -Server ClientAccess01 | fl
    If you didn’t purchased the certificate of audiscovery.westmoreload-country.org, you could contact your certificate supplier.
    You could refer to the following link:
    https://support.microsoft.com/kb/940726?wa=wsignin1.0
    If there are any questions regarding this issue, please be free to let me know.
    Best regard,
    Jim

  • Outlook 2010/2013 clients, outside of our main office, can't connect to our Exchange 2010 server

    Hi,
    Our remote users had been connecting to our Exchange server at our office since the Exchange server was installed in 2011.
    Starting last Wednesday, Outlook 2010/2013 clients, outside of our main office, can't connect to our Exchange 2010 server.  Outlook kept asking for a username and a password.  At the same time, entries of Event 4625 were generated on the Event
    log on out Exchange server. 
    Events 4625 has the following properties, "Logon Type: 3", "Failure Reason: An Error occured during Logon.", "Status: 0xc000006d", "Logon Process: NtLmSsp", and "Authentication Package: NTLM".
    By the way, I had used a laptop to test this problem.  Its Outlook work fine ion the main office, but it won't work outside of our office.
    Does anyone have any idea?
    Thanks.
    Johnnie :(
    Johnnie

    http://blogs.technet.com/b/rmilne/archive/2015/03/17/update-015_2d00_027-revised-_2800_3002657_2900_.aspx
    For additional people reading this thread, please update to v2 of that update.
    Cheers,
    Rhoderick
    Microsoft Senior Exchange PFE
    Blog:
    http://blogs.technet.com/rmilne 
    Twitter:   LinkedIn:
      Facebook:
      XING:
    Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

  • Can't connect to the exchange powershell 2013

    Hi All ,
    I have exchange 2013 and for some reason I can't connect to the exchange powershell.
    Here is the message i get:
    ERBOSE: Connecting to ICTA-EXCH1.icta.ky.
    New-PSSession : [icta-exch1.icta.ky]
    Connecting to remote server icta-exch1.icta.ky failed
    with the following error
    message : Logon failure: unknown user name or bad password. For more information, see the about_Remote_Troubleshooting
    Help topic.
    At line:1 char:1
    + New-PSSession -ConnectionURI "$connectionUri" -ConfigurationName Microsoft.Excha ...
    + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
        + CategoryInfo          : OpenError: (System.Manageme....RemoteRunspace:RemoteRunspace)
    [New-PSSession], PSRemotin
       gTransportException
        + FullyQualifiedErrorId : LogonFailure,PSSessionOpenFailed
    VERBOSE: Connecting to ICTA-EXCH1.icta.ky.
    New-PSSession : [icta-exch1.icta.ky]
    Connecting to remote server icta-exch1.icta.ky failed
    with the following error
    message : Logon failure: unknown user name or bad password. For more information, see the about_Remote_Troubleshooting
    Help topic.
    At line:1 char:1
    + New-PSSession -ConnectionURI "$connectionUri" -ConfigurationName Microsoft.Excha ...
    + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
        + CategoryInfo          : OpenError: (System.Manageme....RemoteRunspace:RemoteRunspace)
    [New-PSSession], PSRemotin
       gTransportException
        + FullyQualifiedErrorId : LogonFailure,PSSessionOpenFailed
    VERBOSE: Connecting to ICTA-EXCH1.icta.ky.
    New-PSSession : [icta-exch1.icta.ky]
    Connecting to remote server icta-exch1.icta.ky failed
    with the following error
    message : Logon failure: unknown user name or bad password. For more information, see the about_Remote_Troubleshooting
    Help topic.
    At line:1 char:1
    + New-PSSession -ConnectionURI "$connectionUri" -ConfigurationName Microsoft.Excha ...
    + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
        + CategoryInfo          : OpenError: (System.Manageme....RemoteRunspace:RemoteRunspace)
    [New-PSSession], PSRemotin
       gTransportException
        + FullyQualifiedErrorId : LogonFailure,PSSessionOpenFailed
    VERBOSE: Connecting to ICTA-EXCH1.icta.ky.
    New-PSSession : [icta-exch1.icta.ky]
    Connecting to remote server icta-exch1.icta.ky failed
    with the following error
    message : Logon failure: unknown user name or bad password. For more information, see the about_Remote_Troubleshooting
    Help topic.
    At line:1 char:1
    + New-PSSession -ConnectionURI "$connectionUri" -ConfigurationName Microsoft.Excha ...
    + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
        + CategoryInfo          : OpenError: (System.Manageme....RemoteRunspace:RemoteRunspace)
    [New-PSSession], PSRemotin
       gTransportException
        + FullyQualifiedErrorId : LogonFailure,PSSessionOpenFailed
    VERBOSE: Connecting to ICTA-EXCH1.icta.ky.

    Hi ,
    No I'm not trying to connect remotely I'm trying to connect from the exchange server itself.
    I was trying also to connect remotely and got this message:
    New-PSSession : [icta-exch1] Connecting to remote server icta-exch1 failed with the following error message : The
    WinRM client sent a request to an HTTP server and got a response saying the requested HTTP URL was not available. This
    is usually returned by a HTTP server that does not support the WS-Management protocol. For more information, see the
    about_Remote_Troubleshooting Help topic.
    THX

  • Can't connect to the modem's server.

    Hi guys, I have a major problem.
    When ever I connect to the internet with my modem, it works. But, when I connect to internet with my router and modem, I can't connect. But I have solved my problem by resetting both, my wireless router and modem. Then after I reconfigure my wireless router all I need to do is to log into my modem's server. But I can't connect to the modem's server. I tired logging in with "admin" (being the password) but I still can't connect to it.
    I am using: Verizon Broadband Network
                     Ultra RangePlus Wireless-N Broadband Router model: WRT160N
                     Westell modem model 6100
    What is the problem? Has anyone experienced this problem before?
    Message Edited by machg on 04-11-2009 07:10 PM
    Solved!
    Go to Solution.

    You will not be able to log  into the modem as long as the router is plugged in
    You must configure the modem first to bridge mode,then plug in the router and log into it
       1.)unplug router and have only the modem in
           go to 192.168.1.1 enter
          that will take you into the verizon modem/ if you have reset the modem then your user is; admin
                                                                                                                         your password is ; password
         once you lopg into that it will ask you to change the username/password
          just type in ADMIN in all 3 blanks
    now you are logged into the modem;;;;;;go to network at the top,then network connections on the left,broadband connection ,you will then put your protocol on bridge/routed bridge,
    now go to wireless settings at the top and make sure wireless is turned on
    you have the option to set up a security key on basic security settings
    once your modem  resets then plug in your router,you are now in bridge mode and the modems connection has moved to your router.  you must restart modem and computer for everything to take effect....
    also make sure and refresh your network list on your laptop
    Hope this works 

  • Can't connect to the window application server.

    I have installed the Sun Secure Global Desktop Software 4.2,
    the client can connect to the unix application server but can't connect to the window applicaiont server.
    What can i do?
    Thank you.

    Hi.
    Are you sure you're using a Windows server which support Terminal Services? In other words, try (on the Windows server) by escaping to the CMD prompt and issue the
    netstat -n
    command as to see if port 3389 is listed in LISTEN state.
    Best,
    Rob

  • Can't connect to the Software Update server (lionserver.t3m.private)? Please help!

    Has anyone experienced this; Can't connect to the Software Update server (lionserver.t3m.private)?
    I can no longer sync my iPhone as it needs an iTunes update. When I select update software and I get the error message above.

    If you are getting the error message "Unable to check for update" when you try an OTA (over the air update)
    Change DNS Servers
    Settings -> Wi-Fi
    Click the blue arrow on your connected network
    Delete everything in DNS and replace it with 208.67.222.222, 208.67.220.220
    Try again
    If this works, you will probably want to remove the WiFi network using "Forget This Network" and then reconnect to it to get your original DNS servers back. Alternatively, make a note of the original DNS servers before deleting them and replace it after you are done.
    If you are getting the error message "Unable to check for update" when you try through iTunes
    On your Mac
    Choose Apple menu > System Preferences, and then click Network.
    Select the network connection service you want to use (such as Wi-Fi or Ethernet, unless you named it something else) from the list, and then click Advanced.
    Click DNS, and then click Add at the bottom of the DNS Servers list. Enter the IPv4 address for the DNS server.
    208.67.222.222
    208.67.220.220
    You can Google Public DNS if you want
    8.8.8.8
    8.8.4.4

  • Can't connect you the X11 window server

    Hi all!
    I am having problems eom to show reports in the BEA with Crystal Reports.
    I use BEA WEBLOGIC PLATAFORM 8,1 for Linux with Crystal Reports XI.
    I configured server BEA to initiate as a service in my Linux SUSE, and therefore I do not use myself in the graphical way.
    However when I try to visualize some report of crystal JSP page, I receive the following error:
    <code>
    Can't connect you the X11 window server using ':0.0 ' the value of the variable DISPLAY
    </code>
    With the reports me this error only occurs, therefore I have you vary webservices and paginas that function perfectly.
    Already I read some topics of the forum related with this problem, but no similar to mine or that it decided my problem
    Somebody could help me?
    Obs:I am brasilian and my English no is good!
    Sorry!

    Hi Vitor,
    May be this will help
    1) Setting the DISPLAY variable using script or in cell by issuing,
    setenv DISPLAY=<machine name>:0.0
    or
    export DISPLAY=<machine name>:0.0
    where <machine name> is the IP or name of the machine that has a graphics server process running, like X11.
    If you migrate your aplication to a different server, maybe the fonts put on the /fonts directory won't work fine...
    Sample:
    setenv DISPLAY=localhost:0.0 export DISPLAY
    results in setting this variable for only that script process or for the cell with the local scope.
    Use the xhost + command to make this variable to global scope with above.
    The link has many workarounds
    http://forum.java.sun.com/thread.jspa?forumID=57&messageID=1973308&threadID=280804
    Thanks
    Vimala

  • Safari can't connect to the web proxy server (HTTP)

    Hello,
    I have following problem. I need to connect to the internet using a proxy server. I went to System Preferences/Network/Wi-Fi/Advanced.../Proxies. Then, I selected Web Proxy (HTTP) and enetered server's IP address and port. It looks like I did everything correctly, but Safary can't open any page because "Safari can't connect to the web proxy server (HTTP)". Does anyone know how to solve this problem?

    There are three possibilities:
    1. You entered the wrong address and port number for the proxy.
    2. You entered the wrong user name and password, if applicable.
    3. The proxy doesn't work or is incompatible.

  • I can't connected to the apple tv server

    I can't connected to the apple tv server?????

    Hello Dinaabiy,
    After reviewing your post, I have located an article that can help in this situation. It contains a number of troubleshooting steps and helpful advice concerning Apple TV issues:
    Apple TV: How to restart your Apple TV
    http://support.apple.com/kb/ht3180
    If you can't restart your Apple TV because it's unresponsive, try the following:
    Hold down Menu and Down on the Apple Remote for six seconds, and then release when you see the indicator light on the Apple TV blink rapidly.
    Unplug the Apple TV power cord for three seconds, and then plug it back in.
    Thank you for contributing to Apple Support Communities.
    Cheers,
    BobbyD

  • Emails will not send - Mail can't connect to the a...

    After having no issues with sending emails for years suddenly I am continually getting the following meassge when trying to send emails. Eventually after putting this password in up to twenty times the email will send.
    The message is:
    Mail can't connect to the account "mail.btinternet.com:[email protected]" Enter the password for user "[email protected]"
    This is happening on all of our computers: Macbook Pro, Macbook Air and Imac and started about 2 weeks ago. It occurs for every sent email.
    Any ideas on how to stop this? 

    MatM wrote:
    I have logged into Bt.com and there is no issues there. Sent an email from there an it was received.
    Also spent 2 long hours sharing a screen with someone from BT who obviously didn't know what they were doing as they did not even look in the MAIL preferences.
    This is the error message we receive:
    The server “mail.btinternet.com” cannot be contacted on the default ports.
    Select a different outgoing mail server from the list below or click Try Later to leave the message in your Outbox until it can be sent.
    Any reason why there server can't be reached. We have been using these settings for years without issue?
    Thanks
    Mat
    Hi.
    What port is set in your smtp account ?
    It could be that your whole account has now been transferred to Critical Path - you can tell this from logging into webmail via bt.com - if it doesn't say BT Yahoo in the title area, you've been transferred and should alter the settings.
    This will, of course, probably cause issues for 100s of 1000s of people. An email should have been received titled "The new BT Mail is coming your way", and gives some details including a link of what to do to various devices and mail clients :-
    http://www.bt.com/newemail
    with particular details here :-
    http://bt.custhelp.com/app/answers/detail/a_id/47531
    http://www.andyweb.co.uk/shortcuts
    http://www.andyweb.co.uk/pictures

  • Can't connect to the software update server, can't connect to the software update server

    please advise, I like to update my iphone 4 and ipad 2 to 5.1 but I cant connect to the software update server.  I've been trying to connect since yesterday.  Is anybody have an idea why?

    If you are getting the error message "Unable to check for update" when you try an OTA (over the air update)
    Change DNS Servers
    Settings -> Wi-Fi
    Click the blue arrow on your connected network
    Delete everything in DNS and replace it with 208.67.222.222, 208.67.220.220
    Try again
    If this works, you will probably want to remove the WiFi network using "Forget This Network" and then reconnect to it to get your original DNS servers back. Alternatively, make a note of the original DNS servers before deleting them and replace it after you are done.
    If you are getting the error message "Unable to check for update" when you try through iTunes
    On your Mac
    Choose Apple menu > System Preferences, and then click Network.
    Select the network connection service you want to use (such as Wi-Fi or Ethernet, unless you named it something else) from the list, and then click Advanced.
    Click DNS, and then click Add at the bottom of the DNS Servers list. Enter the IPv4 address for the DNS server.
    208.67.222.222
    208.67.220.220
    You can Google Public DNS if you want
    8.8.8.8
    8.8.4.4

  • Can't connect to the BlackBerry World server

    It says "BlackBerry World is having trouble connecting to the BlackBerry World server. Verify your network connections and try again."
    I have recently updated my BlackBerry Playbook. It's.been like this for weeks now.
    Any help would be appreciated.
    Thanks.

    The Playbook can only do updates with WiFi, or if it is a 4G it will do the updates over the mobile network.
    If the Playbook does not update, try a re-start. Also check if your router is allowing WiFi access to the net.
    If you did an operating system update, you may have to go the Identification and re-enter the Playbook's ID and password to allow access for updates and backups to work. The ID is in the main system menu listing.
    Jerry G.

  • DNS: Client can't connect because .local domain isn't in DNS. How can I connect over the WAN to server.domain.local?

    So my 2012 server is set up on the LAN with a .local domain name. 
    Remote Desktop Services are set up and remoteapp stuff works fine on the LAN.
    I've set up port forwarding so I can connect to the server over the WAN too, but remoteapp stuff is a bit different. I can connect to the server by specifying the correct IP address. Giving a Web browser the address
    https://serverIPAddress/RDWeb
    lets me get the login screen and see the range of apps for me to run. I select one, the connectoid is downloaded correctly (in Chrome) and I click on the downloaded connectoid. 
    Unfortunately, rather than pursuing the sensible IP-address approach that I started with, the connectoid has been given the server's name on the LAN:  server.domain.local. Clearly, the client machine tries to look this up but DNS hasn't heard of
    it because it's a .local address. 
    I cannot be the only one to have come across this apparent oversight on Microsoft's part. Any ideas as to how this can sensibly be overcome? Obviously, I could put the IP address translation into every client's hosts file (and I've done this and shown it
    works) but I've got too many clients to mess about like this. Anybody know 'the Microsoft way' to fix this?
    Thank you for checking this out -- I am confident the details of the problem are completely specified in this query but, if I'm wrong, please ask.
    Many thanks again,
    Biffo

    Hi,
    I would like to suggest you to follow the checklist.
    Checklist: Make RemoteApp Programs Available from the Internet
    http://technet.microsoft.com/en-us/library/cc772415.aspx
    Thanks.
    Jeremy Wu
    TechNet Community Support

  • Exchange 2013 wil NOT send email, same problem as every other exchange 2013 user, typical everything.

    I have a brand new dell server 2 netwrok cards. One WAN one LAN connected, each with its respective DNS server added to the card. In OWA the sent email shows in drafts, in outlook it shows in sent items, the user NEVER gets it, internally or externally.
    i get all mail from the internet, exactly as expected no problem, all tests show this is working everything checks out fine, server runs great, full blown domain controller with exchange 2013 added. ONLY problem after the 9th install, is still the same, exchange
    will NOT send email, everything else works perfectly event log looks great. I do see the DNS error where a DNS server on that network card is not responding crap, which is not true, internet works, al pages everything, NO firewall Bare connect while i get
    it to work. I HAVE been over the forums for the last week, tried all done all. i am an MSCE, was an MCSE instructor for 10+ years, Exchange Administrator, Exchange instructor for years, so yea, i am not some newb who has no clue, this DOES NOT WORK. it
    came at the CU1 level right out of the box, so i did not install and break it myself Microsoft is now selling this broken. Where do i go what do i do here. Like i said, every other aspect is in perfect order, Just email not sent, not showing in exchange tracking
    logs, and that DNS error on the event log, and YES i made the send connector, and the 3 setting it asks, not like that could be wrong, i mean seriously you put in very little info, any wrong entry would be obvious to even a child. SO walk me through what is
    going worng, as soon as this server sends an email, i am done building this domain, Please Help here.

     Performing Outbound SMTP Test
      The outbound SMTP test was successful.
     Additional Details
    Elapsed Time: 18739 ms. 
     Test Steps
     Attempting reverse DNS lookup for IP address xxx.xxx.xxx.148.
      The Microsoft Connectivity Analyzer successfully resolved IP address xxx.xxx.xxx.148 via reverse DNS lookup.
     Additional Details
    The Microsoft Connectivity Analyzer resolved IP address xxx.xxx.xxx.148 to host wsip-xxx.xxx.xxx.148.ri.ri.cox.net. 
    Elapsed Time: 187 ms. 
     Performing Real-Time Black Hole List (RBL) Test
      Your IP address wasn't found on any of the block lists selected.
     Additional Details
    Elapsed Time: 18453 ms. 
     Test Steps
     Checking Block List "SpamHaus Block List (SBL)"
      The address isn't on the block list.
     Additional Details
    IP address xxx.xxx.xxx.148 wasn't found on RBL.
    Elapsed Time: 1050 ms. 
     Checking Block List "SpamHaus Exploits Block List (XBL)"
      The address isn't on the block list.
     Additional Details
    IP address xxx.xxx.xxx.148 wasn't found on RBL.
    Elapsed Time: 27 ms. 
     Checking Block List "SpamHaus Policy Block List (PBL)"
      The address isn't on the block list.
     Additional Details
    IP address xxx.xxx.xxx.148 wasn't found on RBL.
    Elapsed Time: 60 ms. 
     Checking Block List "SpamCop Block List"
      The address isn't on the block list.
     Additional Details
    IP address xxx.xxx.xxx.148 wasn't found on RBL.
    Elapsed Time: 90 ms. 
     Checking Block List "NJABL.ORG Block List"
      The address isn't on the block list.
     Additional Details
    IP address xxx.xxx.xxx.148 wasn't found on RBL.
    Elapsed Time: 8161 ms. 
     Checking Block List "SORBS Block List"
      The address isn't on the block list.
     Additional Details
    IP address xxx.xxx.xxx.148 wasn't found on RBL.
    Elapsed Time: 119 ms. 
     Checking Block List "MSRBL Combined Block List"
      The address isn't on the block list.
     Additional Details
    IP address xxx.xxx.xxx.148 wasn't found on RBL.
    Elapsed Time: 61 ms. 
     Checking Block List "UCEPROTECT Level 1 Block List"
      The address isn't on the block list.
     Additional Details
    IP address xxx.xxx.xxx.148 wasn't found on RBL.
    Elapsed Time: 63 ms. 
     Checking Block List "AHBL Block List"
      The address isn't on the block list.
     Additional Details
    IP address xxx.xxx.xxx.148wasn't found on RBL.
    Elapsed Time: 8818 ms. 
     Performing Sender ID validation.
      Sender ID validation was performed successfully.
     Additional Details
    Elapsed Time: 97 ms. 
     Test Steps
     Attempting to find the SPF record using a DNS TEXT record query.
      The Microsoft Connectivity Analyzer wasn't able to find the SPF record.
     Additional Details
    No records were found.
    Elapsed Time: 97 ms. 

Maybe you are looking for

  • How do I open a .wri (Windows wordpad) file attachment in ipad?

    I have a user who receives system generated reports in WRI format via email on his Ipad2. We cannot change the file type from the server generating this file. Is there a way to open this file in IPAD by designating an application to this '.wri' file

  • Problem with Access 2000

    Hi everyone, I have a problem to update information for a table in Access 2K that contains spaces in the field's name. e.g. Main Phone instead of MainPhone. I can hear right then a bunch of people who will suggest to change the field name right away.

  • Error in Forms 10G isuite

    OS windows 2003 Forms 10G isuite when I am trying to run the form getting this error java.lang.classNotFoundException:oracle.forms.engine.Main

  • Cannot play mp3 files in car stereo after upgrade 5.0.1

    I upgraded to 5.0.1 a few weeks ago and just tried burning an mp3 cd to play on my Kenwood in my car. Befor the upgrade, no problems, now, nothing plays, just starts on track one, no title display and just plays silence for as long as I could scan fo

  • HT4059 where are my audiobooks

    i just bought an audiboook, and i can see it in my purchased but i can't find it in any section. where would it be? and how can i sync it to my ipod suffle (3rd gen) and also my iphone (4)?