Outlook 2013 emails showing sent but not being rec...

Hi all
It appears that for the last few days any emails I have sent have not been received. They are not stuck in my Outbox and are sitting in my Sent items. If I run a test message from my Outlook profile, it sends and one time it has been received back. ic an receive emails from everyone else.
 If I send an email from my Iphone for the BT email account ( Bt yahoo) emails are being sent and received.
My iPhone has the outgoing server as YAhoo!SMTP Server and server port 465. My Outlook has mail.btinternet.com and server port 587 as settings. I am using POP not IMAP and made no changes which might have provoked this problem.
This problem  has just started suddenly. Probably from about Friday 23rd Jan.
Any advice welcome. I repaired the account in Outlook but this has had no effect.
Windows 8.1 is op system.
many thanks

I think the fault may lie in BT.  Have you seen the message displayed on bt.com/help and also on the log on page:
"BT Mail and BT Yahoo issue.  We’re aware of a problem that may be preventing some customers from accessing, sending or receiving their emails. We’re sorry about this and are working hard to fix it as soon as possible"
I experienced the problem last week and over the week-end and spent many hours on the 'phone with BT Help people who were very good and, touch wood, it seems to have been resolved.  I think it is an issue with the migration from Yahoo to BT mail.

Similar Messages

  • In outlook 2013 emails,pdf attachments are not showing in pdf formats

    Hi,
    We are using outlook 2013 as pop account for our official email communication.One of the laptop is having windows 7 professional operating systems and the email we are using as outlook 2013 in that laptop.
    The issue is that when we try to attach the pdf documents in outlook 2013,it is attaching but it is not showing in pdf format and it is showing as notepad or word file.
    when we try to open the notepad ,word file,it is opening in pdf format and also the client is receiving in pdf format.
    If we attach the pdf document in email,it should show in pdf format.
    Some settings are changed and i need your support to fix the issue.
    Regards
    Pradeep

    Hi,
    Are the PDF files showing with the PDF icon or other icons in your local disk?
    Please start Outlook in sate mode and test again. To do this, press Windows key + R to open the Run command, type
    outlook /safe and press Enter.
    In addition, you may also try to clean out the Temporary Outlook Files folder to check the result. See:
    http://www.howto-outlook.com/faq/securetemp.htm
    Please let me know the result.
    Regards,
    Steve Fan
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.

  • Emails going out but not being recieved

    I have a .mac email acct. that I have used for over a year now. My acct. subscription just renewed about two weeks ago and since it renewed I am able to send email but the recipients are not getting them. The emails are leaving my computer and registering in my "sent" folder but they are not getting through to the folks I am sending them to. This is a little sporadic where one might get through but 10 or so others don't and I don't know what is happening to them. I don't get any notification of a problem with email addresses and a lot of the outgoing email are reply's but not getting through. Can anyone assist with this?
    Thanks,

    In response to your questions:
    Over a week to multiple recipients.
    I have asked some of them to check their spam folders and they have come back saying they are not in there.
    No, nothing sitting in my outbox and my "Sent" folder shows them as leaving the computer.
    No, I still connect the same way I have always connected.

  • Mail showing emails as 'sent' but not arriving with the recipient

    Hi, I have had this problem before and it seemed to clear itself up after a few weeks, but I wonder if there is some way I can clear it up now.
    I send emails from Mail as normal, and they are shown as 'sent'. But only some get through, and the majority don't. Is there some setting I can change, or some way I can see if my mails have arrived?
    Many thanks, Rose

    Same happened to me twice.  1 Message showed up days later.  also using iPhone

  • My iCloud for windows is syncing email and notes with my MS Outlook 2013 on windows 8 but NOT contacts and calendar

    Dear, I have downloaded and installed iCloud for windows and see that a user has been auto setup in my MS Outlookvia imap. I can now sync email and notes.I cannot sync icloud contacts and calendar with my MS Outlook, can you help me with this?

    iCloud hosts the calendars on its server and your various computers read them from there. The protocol for doing this is called CalDAV.
    Outlook for Mac has not been equipped with the programming for CalDAV and therefore cannot access iCloud calendars. Outlook for Windows evidently has and can.
    This is something only Microsoft can rectify and you could send them feedback suggesting they do this with all convenient speed.
    Outlook on a Mac can only access calendars living under 'On My Mac' and these cannot sync with iCloud. iCal can sync with iCloud provided you have 1-.7.2 or higher.

  • Account password reset sent but not received by Outlook.

    I have requested a password reset, went through the process and had success at Apples end. Email was sent but not received by the Outlook account email I have been using for years. Outlook is still working fine. Nothing in Junk folder and have added the apple email to contacts (from last reset).
    Any ideas?

    Contact Apple for assistance resetting the password, either by going to https://expresslane.apple.com, then click More Products and Services>Apple ID>Other Apple ID Topics>Lost or forgotten Apple ID password, or by contacting the Apple account security team: http://support.apple.com/kb/HT5699.

  • Email gets queued, but not sent until I login to my account on the server.

    This is very strange. Let me explain.
    1. Snow Leopard Server 10.6.2 running on an iMac.
    2. I have the Mail Service running on the server. I can receive emails without problems.
    3. Using my Snow Leopard Server email account, I attempt to send an email to another account (e.g. a mac.com email account).
    4a. If I am actively logged into my Snow Leopard Server account *on the iMac* (e.g. via VNC, as long as my desktop is active), the email will arrive successfully. Here are the mail.log messages:
    postfix/smtpd\[69030]: connect from \[External Host Address]
    postfix/smtpd\[69030]: 942814AD55B: client=\[External Host Address], sasl_method=CRAM-MD5, sasl_username=MyUserName
    postfix/cleanup\[69037]: 942814AD55B: message-id=<[email protected]e. com>
    postfix/qmgr\[65313]: 942814AD55B: from=<[email protected]>, size=604, nrcpt=1 (queue active)
    postfix/smtpd\[69040]: connect from localhost\[127.0.0.1]
    postfix/smtpd\[69040]: C611B4AD568: client=localhost\[127.0.0.1]
    postfix/cleanup\[69037]: C611B4AD568: message-id=<[email protected]e. com>
    postfix/smtpd\[69040]: disconnect from localhost\[127.0.0.1]
    postfix/qmgr\[65313]: C611B4AD568: from=<[email protected]>, size=1043, nrcpt=1 (queue active)
    postfix/smtp\[69038]: 942814AD55B: to=<[email protected]>, relay=127.0.0.1\[127.0.0.1]:10024, delay=0.25, delays=0.1/0.01/0/0.14, dsn=2.0.0, status=sent (250 2.0.0 Ok: queued as C611B4AD568)
    postfix/qmgr\[65313]: 942814AD55B: removed
    postfix/smtp\[69042]: C611B4AD568: to=<[email protected]>, relay=smtp-mx005.mac.com\[17.148.17.5]:25, delay=0.48, delays=0/0.1/0.14/0.23, dsn=2.5.0, status=sent (250 2.5.0 Ok, envelope id [email protected])
    postfix/qmgr\[65313]: C611B4AD568: removed
    4b. If, however, my Snow Leopard Server account is either logged out, or even just "fast user switched" to the Login Window, the email gets queued, but not sent to the external email address. I get the following four messages in the mail.log file:
    postfix/smtpd\[69030]: connect from \[External Host Address]
    postfix/smtpd\[69030]: B5F574AD582: client=\[External Host Address], sasl_method=CRAM-MD5, sasl_username=MyUserName
    postfix/cleanup\[69037]: B5F574AD582: message-id=<[email protected]e. com>
    postfix/qmgr\[65313]: B5F574AD582: from=<[email protected]>, size=604, nrcpt=1 (queue active)
    4c. The instant I login to my machine at home (e.g. via VNC), the email finishes processing. The below messages are logged, and my external email account receives the email:
    postfix/smtpd\[69160]: connect from localhost\[127.0.0.1]
    postfix/smtpd\[69160]: 20B244AD5B0: client=localhost\[127.0.0.1]
    postfix/cleanup\[69037]: 20B244AD5B0: message-id=<[email protected]e. com>
    postfix/smtpd\[69160]: disconnect from localhost\[127.0.0.1]
    postfix/qmgr\[65313]: 20B244AD5B0: from=<[email protected]>, size=1043, nrcpt=1 (queue active)
    postfix/smtp\[69038]: B5F574AD582: to=<[email protected]>, relay=127.0.0.1\[127.0.0.1]:10024, delay=74, delays=0.1/0/0/73, dsn=2.0.0, status=sent (250 2.0.0 Ok: queued as 20B244AD5B0)
    postfix/qmgr\[65313]: B5F574AD582: removed
    postfix/smtp\[69163]: 20B244AD5B0: to=<[email protected]>, relay=smtp-mx006.mac.com\[17.148.17.6]:25, delay=0.49, delays=0.09/0.01/0.15/0.25, dsn=2.5.0, status=sent (250 2.5.0 Ok, envelope id [email protected])
    postfix/qmgr\[65313]: 20B244AD5B0: removed
    I'm very much at a loss here. It's as if the act of logging out (or fast user switching to the Login Window) suspends some process that is required for my email to process. But .... why?
    Any ideas? Any additional information I can provide to help figure this out? Fwiw, I used to run Tiger Server (never tried Leopard Server) and never had this problem.
    Rob

    Looks to me like the anti-virus scanner, amavis. The clue is the line:
    postfix/smtp[69038]: 942814AD55B: to=<[email protected]>, relay=127.0.0.1\[127.0.0.1\]:10024, delay=0.25, delays=0.1/0.01/0/0.14, dsn=2.0.0, status=sent (250 2.0.0 Ok: queued as C611B4AD568)
    where the 10024 is the default port that Amavis runs on. Postfix is configured to pass mail through this port, and queues the mail until Amavis is available.
    My guess, therefore, is that Amavis is set to run under your account rather than under the system, which is why it only runs when you're logged in. Off hand I have no idea how you managed this and that makes it hard to work out how to fix it. I'd start by looking for org.amavis.amavisd.plist in /System/Library/LaunchDaemons, /Library/LaunchDaemons and ~/Library/LaunchDaemons (it should be in the former, but if its in the latter that could explain it.

  • How can I unverify an email once it is not being used?

    I changed my iTunes account email once. Now, I need to get back to that email, but Apple says it is being used in another account. I am pretty sure that the first email is not being used for any other account.
    Through Apple's site, I chose "iForgot" to resend the password , so I should be able to login to that email account (if it was linked to another account, like they claim). Apple can't send an email for verification. Actually, they say that the email was sent, but it was not.
    How can I unverify this email once Apple says it is linked to another account, but it is not (if it was, the iForgot email would come)?

    for either method to work the state dividing lines must go past the state borders, for example, the line that divides these two states needs to go north a little bit more, I exaggerated the space so you can see, for your map this gap must be really small. Zoom in where you have trouble making separate shapes and fix it before using either tool.

  • When I try to email photo from organizer, the email is sent but there is no photo attached

    When I try to email a photo from Elements 13 organizer, the email is sent but the photo is not attached

    Which email service provider are you using?  You can install DropBox and share links to the files that way.  When you snd to your self (cc or bcc) do the items show up?  What file types and sizes are these attachments?  Are you sending over WiFi or cellular connection?  Try using more than one email account from a different provider (Gmail, yahoo, iCloud, etc) and see if it is email provider specific.

  • My ipod has had a previous owner How do I change my ipods email address so that when I try to down load anything it asks for the previous owners password but when I go to my account it says its my email my account but not when I try to download????

    My ipod has had a previous owner How do I change my ipods email address so that when I try to down load anything it asks for the previous owners password but when I go to my account it says its my email my account but not when I try to download can anyone please help me ????Plus it still has some of the previous owners pictures and videos on it that I want to delete and can't????? Also is there a way to kill the apps that u have used throughout the day the battery doesn't last long at all ??????

    - How did you dlete stuff from the iPod? If you have a 1G or 2G iPod and deleted the stuff by going to Settings>Genera.>Reset>Erase aall contents and settings without being connected to a power source, the battery dies before he erase was comleted since it can take hour.
    - In any event try the following:
    - Connect to a chaging sour for three hours.
    - Reset the iPod and then connect to the computer and try to restore va iTunes.
    Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Next try placing the iPod in recovery moe and then try to restore. For recovery mode:
    iPhone and iPod touch: Unable to update or restore
    - Last try DFU made and restore.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

  • Finder shows some but not all files in a folder

    In some circumstances, Finder only shows some (but not all) of the files in a folder. Why?
    I notice this with Excel autosave files in the Office 2011 Autorecovery folder (Macintosh HD ▸ Users ▸ Conor ▸ Library ▸ Application Support ▸ Microsoft ▸ Office ▸ Office 2011 AutoRecovery). In my case, Finder shows 34 files but "ls" in a Terminal window reports 40 files. The missing files do not start with a period (.) and have the same permissions as other files that show in Finder (-rw-r--r--@ 1 <myname>  staff). Here's the last four lines of "ls -al" - the first two appear in Finder, but not the last two:
    -rw-r--r--@  1 myname  staff    55296  8 Oct  2013 Word Work File D_1239425731.tmp
    -rw-r--r--@  1 myname  staff    55296  8 Oct  2013 Word Work File D_1240072173.tmp
    -rw-r--r--@  1 myname  staff    52796 13 Feb 11:08 safe1.xlk
    -rw-r--r--@  1 myname  staff    95320 12 Mar 16:06 safe2.xlk
    I have tried copying files from this folder to another folder, and/or changing their names. They still do not appear in Finder, nor are they visible in the File Open dialog of applications, even when the dialog is listing other files in that directory - but if I manually type the name into the File Open dialog, the app manages to find and open the file.
    If I Spotlight-search for the file name, or search in Finder, without specifying that specific directory ("This Mac"), the file is not found, but if I direct the Finder search at that particular directory, then the search returns the relevant files.
    So: why does Finder hide certain files when showing a folder, even though it can find and show those files if you specifically ask for them?
    Now using OSX 10.10 (Yosemite), but I'm pretty sure I noticed this on OSX 10.8 as well.

    So simple - thanks. I'd not been aware of the hidden flag, and now I've found the -O option on ls to display it.
    Follow-on question: I now see that you can change the system-wide defaults to display hidden files with this...
         defaults write com.apple.finder AppleShowAllFiles -boolean true ; killall Finder
    ...but is there a way to specify this on a per folder basis? I'm happy enough to hide hidden files in general, but it would be nice if I could set an attribute/flag/whatever on the Office AutoRecovery directory that told Finder "in this folder, always display hidden files". Can I do this?

  • I want signature in emails I originate, but not replies

    I want signature in emails I originate, but not replies.  How can I make this happen, please?
    Thanks.

    You can only set it to use for sending automatically, but you can't specify between new messages or replies. Don't see any way to change it.
    Just in case you don't know about this, you can have the Signautre Box available with new message or replies. If you don't have it showing, choose customize at the left bottom of the new message header window and check to show signature box.That makes it easy to add a signature or remove one, depending on how you have it set up.

  • I want to share some photos via email to multiple but not all addresses in my address book

    I want to share some photos from iphoto via email to multiple but not all addresses in my address book but when I try and add a recpient in the To field it will only allow me add one. I have to send the email to juts one person and then when it is sent the template with my photos and messages disappears and I have to start all over again! Surely there is an easier way - please help! Thanks

    IMHO the best solution is to use apple mail - set it in your iPhoto preferences
    LN

  • I set up an apple id for my 12 year old, a verfication email was sent, but google has locked her out because of age.  How do I get the verfication email?

    I set up an apple id for my 12 year old, a verfication email was sent, but google has locked her out because of age.  How do I get the verfication email?
    Should each person in my house have their own apple id and password?
    Can each of the different ID's be linked back to my apple account so that when they purchase apps and music it will be charged to my credit card?

    alyssa1105 wrote:
    I set up an apple id for my 12 year old, a verfication email was sent, but google has locked her out because of age.  How do I get the verfication email?
    Ask Google... they locked you out of the email account.

  • When I check for software updates only itunes and random other updates show up but not security updates or safari update. When i check installed updates I realized my last security update was 2011-004 and I still have safari 5.0.6. Can anyone help me?

    When I check for software updates only itunes and random other updates show up but not security updates or safari update. When i check installed updates I realized my last security update was 2011-004 and I still have safari 5.0.6. Can anyone help me?

    Don't panic. OS X 10.5.8 is the most popular PowerPC OS out there. People run it everyday without security breaches, including myself. It isn't Windows!
    If you're really that worried, I highly recommend Sophos Anti-Virus for Mac Home Edition. Supports PowerPC & Intel and Mac OS X 10.4-10.7.
    http://www.sophos.com/en-us/products/free-tools/sophos-antivirus-for-mac-home-ed ition/system-requirements.aspx
    Direct download: http://downloads.sophos.com/home-edition/savosx_73_he.dmg

Maybe you are looking for

  • BPM roles not avaialable in BPM workspace

    Hi , I am facing an issue with the BPM workspace. I deployed my BPM process in my SOA server. But I am not able to view the roles defined in my BPM application in BPM workspace. I can muanuaaly add the role under Application Roles in Fusion Middlewar

  • How to enumerate items on multi state object? (SDK Indesign)

    Hello, I need to take all snapshot items in multistate object. How to get all items in multistate object? Thanks

  • Can't registered a new product

    I'm trying to registered the new iPhone that I ordered on Apple.com. It shows, "According to our records, this serial number is registered to another Apple ID. If you have more than one Apple ID, log in to My Support Profile with that Apple ID to see

  • HOW CAN I MARK A CHECKBUTTON USING ABAP CODE?

    HOW CAN ALL THE CHECKBOXES IN MY ALV BE MARKED WHEN I CLICK ON A BUTTON?

  • Java Beans and EJBs

    Hi friends, I am quite new to Java and am interested in understanding EJBs and their use in deploying distributed applications. I am not sure if I am supposed to first understand Java Beans before jumping to EJBs. I did read some of the messages unde