Outlook 2013 error message

In Outlook 2013, "An object cannot be found"?
This topic first appeared in the Spiceworks Community

Hi,
Did you configure the Outlook Today page as the default start page? If so, please right-click on the top folder level of your mailbox and select
'Data File Properties' > then Home Page
tab > Click the 'Restore Defaults' button > Click
OK. Restart Outlook to see if this issue persists.
If above didn't fix the issue, please try to create a new mail profile in Control Panel and reconfigure your email account in the new profile to see if it helps:
http://support.microsoft.com/kb/829918/en-us
Hope this helps.
Regards,
Steve Fan
TechNet Community Support

Similar Messages

  • MS Outlook 2013 Error message "The microsoft exchange administrator had made a change that requires you to quit and restart outlook"

    I am currently running 2 HP Servers, SAN Storage. I have Exchange 2013 installed and MS Outlook 2013 randomly appears with the message
    "The Microsoft exchange administrator has made a change that requires you to quit and restart outlook" It is happening very frequently and is appearing every few seconds on a lot of users.

    Hi WeeMac22,
    If you migrated from Exchange 2010 to Exchange 2013, I found a KB for your reference:
    Outlook 2013 cannot connect after an Exchange Server 2010 mailbox is moved to Exchange Server 2013
    http://support.microsoft.com/kb/2934750/en-us
    If not, I suggest using OWA to verify whether this issue remains.
    1. If everything works well in OWA, it seems an issue on the Outlook client side.
    I suggest run Outlook under safe mode to avoid some AVs and add-ins.
    I suggest re-create profile to refresh the caches.
    I suggest re-install the Outlook if all methods above not working.
    2. If this issue remains in OWA, please verify whether all users on the Exchange 2013 have this isse.
    If only one user has this issue, I suggest create a test user to check whether the test user has this issue.
    If the test user works well, I suggest try to re-create the specific user account.
    Please make a full back up before re-creating.
    Thanks
    Mavis
    Mavis Huang
    TechNet Community Support

  • Office Home and Student 2013 error message with yellow triangle

    I have been using my word and excel they were working fine. Now there is a yellow triangle  top right corner by my initials. I finally got it to show me only for a moment what it means. Error Message: did not realize I should have copied it down but
    after error message it said to sign-out and sign back in. I have never had to sign in before the Office was installed in Dec 2013 by Best Buy. All they returned was the card they had used to download. When I tried to click on sign in it does nothing. The error
    seems to have the word program very mixed up as it will preform some task but seems to lock me out of other normal things I usually do like spacing or changing font size just to name a few. I already checked for all updates on my computer per your sites suggestions.
    How do I make the error message /yellow triangle go away and allow me to use the office home and student 2013 like it was working before. Please help I live alone, and near 60, live in the boondocks, and do not have any computer people within a 4 hour drive
    round trip. Thank you

    Now there is a yellow triangle  top right corner by my initials.
    Hi,
    As per the description, it looks like an issue with your microsoft account. Does the error message look like below?
    ACCOUNT ERROR
    Sorry, we can't get to your account right now.
    To fix this, please sign in again.
    Sign in
    You mentioned that "a yellow triangle  top right corner by my initials", you probably have already signed in with an acocunt. If you remember this account, I'd suggest you click
    File>Account on the tab, click Sign out under
    User Information, and then sign-in again. If you don't have this account, you probably need to contact the retailer for it.
    If issue persists, please post back with the details of your system environment, then we will take a further look.
    Regards,
    Ethan Hua
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.

  • Sharepoint 2013 error message

    Hi all,
    I received this error message while opening a report in SharePoint 2013 and I'm not quite sure what's wrong. Any ideas on how to resolve this? Any suggestions would be appreciated.
    Error
    An   error has occurred during report processing. (rsProcessingAborted)
    Cannot impersonate   user for data source 'AdvanceDS'. (rsErrorImpersonatingUser)
    Log on failed.   Ensure the user name and password are correct. (rsLogonFailed)
    For more   information about this error navigate to the report server on the local   server machine, or enable remote errors
    Thank you
           Adam,

    Hi,
    According to your post, my understanding is that you received the error message while opening a report in SharePoint 2013.
    Please Make sure that the local policy of the DC allows for login of non-admin users.
    (Domain Controller Security Policy > Local Policies | User Rights Assignment | "Allow log on locally" policy and add domain users.
    More information:
    https://msmvps.com/blogs/vstsblog/archive/2010/08/16/solved-reporting-services-error-cannot-impersonate-user-for-data-source-tfsreportds-rserrorimpersonatinguser.aspx
    Best Regards,
    Linda Li
    Linda Li
    TechNet Community Support

  • HT204150 icloud sync to outlook 2013 errors in setup

    I was having some issues with icloud syncing with outlook 2013 on my windows 8 PC, so i uninstalled it and re-installed.   Ever since then, i have not been able to even get icloud for windows set up.  I keep getting an error in the final stage of the setup after i tick the box on outlook calendar, contacts and tasks in the control panel.  The error i get is: "Your setup couldn't be started because the iCloud server stopped responding."  When I hit the report button, the following eror comes up in the email: Error: 0x80004005: HTTP Error 503. 
    have uninstalled, restarted, downloaded a fresh version and re-installed then restarted again but this didn't work. 
    Any new ideas?
    thanks

    Hockley7 wrote:
    I have been trying for hours and numerous with reinstals of the desktop but I can't get the BB 7.1 Desktop to recognize my Outlook 2013 profile (Windows 8) so I can configure syncronizing the contacts and the calendar.  It worked on Outlook 2010 and in Wondows 7.  Spent 3 hours on the phone with MS and the profiles are there but they don't show up when I need to select the platform.
    Hi and Welcome to the Community!
    I am sorry to have to reference you to these materials:
    KB12268 Synchronization support for BlackBerry Desktop Software for Windows
    http://us.blackberry.com/software/desktop/desktop-pc/system-requirements.html
    You will notice that Outlook 2013 does not appear in any of that. Which means it is not supported. Which means it cannot be expected to function.
    Again, sorry.
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Microsoft Outlook sync error message

    Here's the error code: 08004fd28. The sync is set to only sync the calendars. Blackberry Desktop Manager queries inconsistencies between the calendars, then shows the error message just noted. Can anyone help?

    Hi,
    What Desktop Manager are you using? You can try to uninstall and reinstall DTM. Make sure to install the latest Device software as well. You can download these through the BlackBerry website.
    So it also gives out this error during the calendar sync? It is possible that there is a corrupt calendar entry on Outlook. What you can do is to do an advance logging. The process is a bit complicated cause you need to edit some intellisync settings to extract the log files. By extracting the log files you will be able to pinpoint the corrupt calendar entry data.
    For this it's best for you to contact you carrier and ask for support.
    Thanks. 

  • Can receive but not send emails in Outlook 2010 - error message 0x8DE000006 The operation failed

    I an @outlook.com email in my Outlook 2010 which worked well at first.
    It now come up with the error message - error message 0x8DE000006 The operation failed and on my Sync Issues it has the following note:
    19:35:57 Error: 3209. Server. We noticed some unusual activity in your Hotmail account. To help protect you, we've temporarily blocked your account.. 
    19:35:57 Contact Support (with the live link which brought me here)
    Which brought me here......any support would be amazing! Thanks

    19:35:57 Error: 3209. Server. We noticed some unusual activity in your Hotmail account. To help protect you, we've temporarily blocked your account.. 
    From this message, it seems that your Outlook.com account is blocked due to some unusual activity. Please first try login to your webmail and check if you can send emails from there. If you can't send email even from webmail, we may try to follow the following
    instructions to unblock your account to resolve the issue:
    http://windows.microsoft.com/en-IN/windows/outlook/account-temporarily-blocked
    Hope this helps.
    Regards,
    Steve Fan
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • Outlook Sync Error Message

    I'm getting the following error message from iTunes syncserver when trying to sync up my Outlook calendars.
    [5184 @ Thu Jun 10 09:16:10 2010] [com.apple.console com.apple.Outlook.client.exe] * Assertion failure in -[MIMsgStore getIdsFromNames:count:tagPointers:], .\MIMapiObject.m:140
    [5184 @ Thu Jun 10 09:16:10 2010] [com.apple.console com.apple.Outlook.client.exe] Stack walk failed: 126
    [5184 @ Thu Jun 10 09:16:10 2010] [com.apple.console com.apple.Outlook.client.exe] Stack walk failed: 487
    Some of my calendar entries seem to be getting sync'd but the VAST majority of calendar entries are missing. My environment is as follows...
    Windows XP Pro - SP3
    iTunes - 9.1.1.12
    iPod OS (32 Gig 3rd Gen) - 3.1.2
    Outlook 2003 - SP3
    I've tried most of the suggestions found here in this forum related to Outlook sync problems but nothing seems to make any difference...
    Any suggestions?
    Cliff

    O.K. Now a follow up....I just upgraded to iTunes 9.2.x and what seems to be syncing is reoccurring calendar entries only. I have tried turning off the calendar sync..which asks me if I want to remove all calendar entries previously synched, to which I say yes. My calendar entries go away. I then turned the synching of calendars back on and the only entries that I see on the iPod are reoccurring calendar entries. NONE of the single calendar entries are showing up. The error message is also no longer appearing in the synch log....very strange.

  • Outlook sends error message repair now but does not repair and won't open

    Installed an update - windows 8.1- now Outlook won't open. I get an error message - Repair Now - but when click on this nothing happens

    Double post
    Please mark my post as SOLVED if it has resolved your problem. It helps others with similar situations.

  • How to recover outlook ost error messages?

    my outlook ost files does not work what i do? How to access my outlook ost file again any please gives any solutions to easily access and convert ost file into outlook?

    First of all, I just wonder what is your meaing of "does not work", whether you can still access the data in the OST file, but get some error messages, or you cannot access the data at all? Based on different cases, you should use different solutions and
    will save you a lot of time and money.
    Without mor specific information, I have to give out general advices here:
    There are several methods to convert OST file to PST file.
    First, Microsoft does not provide an official tool to do the conversion. However, if you can access the contents of the OST file in your Outlook, then you can perform the conversion manually, as follows:
    1. Start Outlook. Make sure you can access all the contents in the OST file to be converted.
    2. Create a new PST file.
    3. Go to the OST file, select and copy all the contents to be converted with your mouse.
    4. Go back to the new PST file, then paste all the contents into the PST file
    That will do the conversion.
    You can also perform the conversion by export the contents of the OST file to a PST file by following the instructions at:
    http://office.microsoft.com/en-001/outlook-help/export-outlook-items-to-an-outlook-data-file-pst-HA102534110.aspx
    Second, if you can access the Exchange server containing the account data for the OST file, then you can use Export-Mailbox command to export the data into a PST file, similar to convert your OST file into a PST file. Below is the article about doing that:
    http://technet.microsoft.com/en-us/library/bb266964.aspx
    http://technet.microsoft.com/en-us/library/cc535123.aspx
    Third, if you cannot access the OST file via Outlook, neither can you access the Exchange Server, then you can refer to Outlook MVPs' website discussing about this issue:
    http://www.slipstick.com/problems/pst-repair/convert-an-exchange-offline-file-ost-to-a-personal-file-pst/
    Forth, there are many third-party OST to PST conversion tools you can try, below is a list of them:
    http://www.datanumen.com/exchange-recovery/compare.htm
    Nearly all these tools provide a free trial so you can try first to see if a tool works before purchase it.
    Good luck!

  • Outlook 2013 error 0x80070043

    Good day All,
    I have an issue only with one particular user with her Outlook 2013. When I try to add and pst file or want to setup an account I get the following error. "An unknown error occurred, error code: 0x80070043"
    The user connect to an Exchange 2010 server. Any help will be greatly appreciated.
    Regards
    Gerrit

    Hi,
    Did the user set any folder redirection before? Especially the default location it shows when you click File >  Open & Export > Open Outlook Data File in Outlook 2013. By default, the location is:
    C:\Users\%username%\Documents\Outlook Files
    To verify this, we may open the Registry Editor and navigate to:
    HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders
    Find the Personal value and check if its data is set to other path rather than
    %USERPROFILE%\Documents. If this is the case, try changing the value to
    %USERPROFILE%\Documents and then test the issue again.
    Please let me know the result.
    Regards,
    Steve Fan
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.

  • Outlook 2010 error message

    Outlook 2010 - 550 error message to several standalone laptops using the IMAP server
    Your message did not reach some or all of the intended recipients.
          Subject:    Re: airport submittal info
          Sent: 3/29/2014 12:28 PM
    The following recipient(s) cannot be reached:
          'David Kingdom' on 3/29/2014 12:28 PM
                Server error: '550 relay not permitted'
          'Allan Miller' on 3/29/2014 12:28 PM
                Server error: '550 relay not permitted'
          '[email protected]' on 3/29/2014 12:28 PM
                Server error: '550 relay not permitted'
    These three laptops have been communicating back and forth together for more than 6 months. REceving from these laptops is not a problem only sending has become a problem as of today. Why would outgoing
    messaages suddenly produce these error messages?  The only way for me to send any messages out is to go to a my Eudora and send them through gmail.com. Perhaps you would explain what I need to do.
    Michael Dodds

    Hi,
    "Sever error 550" usually happens when you try to use an SMTP server that you do not have permissions to send through. Please try to enable the
    SMTP authentication and try again. To do this, click File > Info > Account Settings > Account Settings > Double-click your IMAP account > Click
    More Settings button > In the Internet Email Settings
    wizard, click on "Outgoing server" tab and tick "My outgoing server (SMTP) requires authentication" and select “Use same settings as my incoming mail server”.
    Click OK and follow the wizard to finish the change.
    For more information about "Server error: 550", please refer:
    http://office.microsoft.com/en-in/outlook-help/troubleshoot-550-553-and-relay-prohibited-errors-HA001112833.aspx
    Note: The article is written for Outlook 2003, but it still applies.
    Best Regards,
    Steve Fan
    TechNet Community Support

  • Workflow 2013 error messages

    In a test workflow 2013, I am getting error messages that look like the following:
    'Form cannot be submitted because of an error'.
    I click on the error details and it gives me the reason there is a problem. The message also says: "An entry has been added to the
    Windows event log of the server. Log ID: 1234.
    I am wondering if there is a way to have more user friendly error messages? If so, can you tell me how to setup the messages to be more user friendly?

    Hi Wendy,
    check those links if they will help, first thing try the rules and data validation, other thing with code
    http://blog.parkercomp.com/2009/05/how-to-customize-infopath-error-dialogs.html
    http://sharepoint.stackexchange.com/questions/51408/find-out-if-validation-errors-exist-in-infopath-form
    https://msdn.microsoft.com/en-us/library/office/aa942787.aspx
    https://support.office.com/en-us/article/Add-rules-for-validation-fa530b5c-419f-4c03-a85f-d7f96cb9de95?ui=en-US&rs=en-US&ad=US
    this book is helpful
    https://books.google.com.eg/books?id=zWYLIp3zfvAC&pg=PA417&lpg=PA417&dq=infopath+form+handling+how+error+appears&source=bl&ots=CT6Um0LiZS&sig=O6Ckoh8MUwvAOa9NtlwarEBfG2k&hl=en&sa=X&ei=dYHcVLSfPITeatr0gqgM&redir_esc=y#v=onepage&q=infopath%20form%20handling%20how%20error%20appears&f=false
    Kind Regards,
    John Naguib
    Senior Consultant
    John Naguib Blog
    John Naguib Twitter
    Please remember to mark this as answered if it helped you

  • Outlook 2011 error messages on Mountain Lion sandboxd mdworker

    Any clue where I might look for a solution to these console reported error on Outlook 2011?
    mdworker(4705) deny file-read-xattr /Users/me/Documents/Microsoft User Data/Office 2011 Identities/Main Identity/Data Records/Fold/0T/0B/0M/0K/x24_72 (pre-plugin fstype:hfs fsflag:480D000 flags:240000005E diag:0 uti:dyn.ah62d4rv4ge8085dpge4gq55qqu plugin:internalPlainTextImporter - find suspect file using: sudo mdutil -t 15095777)
    Process:         mdworker [4705]
    Path:            /System/Library/Frameworks/CoreServices.framework/Frameworks/Metadata.framework /Versions/A/Support/mdworker
    Load Address:    0x10ddbb000
    Identifier:      mdworker
    Version:         ??? (???)
    Code Type:       x86_64 (Native)
    Parent Process:  launchd [145]
    Date/Time:       2013-02-16 17:21:26.640 -0700
    OS Version:      Mac OS X 10.8.2 (12C60)
    Report Version:  8
    Thread 0:
    0   libsystem_kernel.dylib                  0x00007fff89109a0a flistxattr + 10
    1   mdworker                                0x000000010ddbf91b
    2   mdworker                                0x000000010ddc1647
    3   mdworker                                0x000000010ddc5404
    4   libsystem_c.dylib                       0x00007fff8696b7a2 _pthread_start + 327
    5   libsystem_c.dylib                       0x00007fff869581e1 thread_start + 13
    Binary Images:
           0x10ddbb000 -        0x10de14ff7  mdworker (707.5) <DA44A302-FA51-3CC6-847C-1C70AC4A37DA> /System/Library/Frameworks/CoreServices.framework/Frameworks/Metadata.framework /Versions/A/Support/mdworker
        0x7fff86957000 -     0x7fff86a23ff7  libsystem_c.dylib (825.26) <4C9EB006-FE1F-3F8F-8074-DFD94CF2CE7B> /usr/lib/system/libsystem_c.dylib
        0x7fff890f7000 -     0x7fff89112ff7  libsystem_kernel.dylib (2050.22.13) <5A961E2A-CFB8-362B-BC43-122704AEB047> /usr/lib/system/libsystem_kernel.dylib

    Hi,
    I would have opened Messages > Preferences > Accounts and deactivated the iMessages account (Untick the Enable this account)
    Then Quit Messages.
    The Restart Messages and then restart the Account.
    A Re-install would do it but is an awfully big hammer to use.
    10:51 PM      Sunday; August 26, 2012
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
      iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • Outlook 2013 error: The connection to Microsoft Exchange is unavailable

    Environment: Windows 7 Enterprise
    Setup: Fresh install of Office 2013
    Issue: When I launch Outlook I get the error:
    The connection to Microsoft Exchange is unavailable. Outlook must be online or connected to complete this action.
    Steps to resolve:
    I made sure my server name and mail address were correct but this did not have an impact.
    I am at a total loss on how to resolve this issue, is there anyway to manually connect to M.E> as it is just saying the connection is unavailable.  All of the other threads dealing with this issue have been no help.  I can sign into my account
    at login.microsoftonline.net so i know the account is valid.  I also receive email to my iPhone with the account and server.  Any advice would be wonderful.
    Now when I start up the application it tells me the same error and brings up something to alter the server and connection address.   

    Hi,
    Have you tried to recreate a new mail profile and then test the issue?
    To do this, please exit Outlook, and then go to
    Control Panel >Mail... > Add…
    Details about create a new mail profile, see:
    http://support.microsoft.com/kb/829918/en-us
    Also, you can try with this KB:
    http://support.microsoft.com/kb/2264398
    This issue occurs when the
    HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders registry key does not contain all of the required data. Specifically, these problems occur if the
    AppData string value is missing from this registry key.
    To resolve this issue, import the
    User Shell Folders registry key from a working Windows User Profile.
    Hope this helps.
    Best Regards
    Steve Fan
    TechNet Community Support

Maybe you are looking for