Outlook 2013 - moving emails from search results to folders.

in outlook 2013 - when trying to move a few emails that were found from search results to various folders - the emails doesn't move to the folder that i specify.
no error message!

Hi,
What type of email account are you using?
How did you move the emails? Via dragging/dropping or right-clicking and selecting Move? Please try both methods to see the result.
I used to see a similar issue caused by a problematic add-in. Please try starting Outlook in safe mode to see if this issue continues. To do this, press Windows key + R to open the Run command, type
outlook /safe and press Enter. If the problem would be gone in safe mode, please go to File > Options > Add-ins and disable suspicious add-ins to fix the issue.
Please let me know the result.
Regards,
Steve Fan
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Similar Messages

Mass email from search results

Can I send a mass mail from the search results of business partners? How?

Hi Craig,
You can do this through customising: SPRO > Logistics - General > Material Master > Tools > Maintain Search Helps
There, give double clicl to the "Search Help" = MAT1_A.
Then, select the tab "Include search helps" and select the search where you want to add a field. i.e. MAT1V - Material by Supply Area.
Once you are there, check if you can add the field LVORM - DF at client level.
Then, save the data and in this search you can have the option to see all the materials deleted or not deleted.
By the way, Narla Rama Krishna Mohan has a document about "Material Master Search Help" and it can help you too.
This is the link:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/8047f84e-7973-2c10-548a-ab4cb1c3c498?quicklink=index&overridelayout=true
Hope this help.
Kind regards,
SP

Outlook 2013 Issues (Emails go missing when stucked in Outbox after restarted Outlook)

Hi,
I have being using Outlook 2013 for email but i have face for two main issues as below which is quite annoy me sometime.
1. Email stucked at Outbox (even is just a normal email without attahcment). Those emails which were stucked at Outbox will goes missing if i just close the Outlook and re-open the Outlook again.
2. Outlook will hangs/ freeze (showing Not Responding) when half way I just viewing my email in Inbox or I click on Calendar.
I have tried to some of the suggestion across other forums such as:
- Disable the add-in (example: Social Outlook Connector/ Lync Meeting (which i dont have it to use) and etc.)
- Checked on the Program Features and clear all the office plugin
- Change the Aero Setting in Windows
- Disable Anti Virus (Just guessing)
- Reinstalled the Office 2013 (Outlook 2013)
- recreated the Outlook profile
However after tried, the first two issue still happened and the critical part is the email will goes missing after i reopen the Outlook.
More Info:
- When the email stuck at Outbox, the Outlook is show "Connected to Exchange"
- My company is using Exchange Server 2007 R2 (not sure got any related or not)
Anyone can get help on this?!!! Thanks a lot!!!
The reason I re-posted this issue as the previous as remarked as answered but somehow after that no more ppl reply.. i need more ppl's suggestion here!!
Thank you

Hi,
Generally for emails stuck in Outbox issue, we need to try basic steps as below:
1. Work offline, move the stuck mail into another folder. Restart Outlook and Work online to send it again.
2. Temporarily uninstall or disable firewall and antivirus software.
3. Test in Outlook safe mode.
4. Create a new profile and re-setup your account.
As you have tried to disable Anti-virus, we also remind you to disable the firewall to test.
Please run MFCMAPI to check if there are emails or corrupted items that are stuck in Outbox, if yes, please delete them.
http://mfcmapi.codeplex.com/releases/view/101020
Here are some articles which use MFCMapi from where you can get some step by step guidance:
http://exchangeshare.wordpress.com/?s=mfcmapi
We can also perform a clean boot to determine if background programs are interfering with Outlook:
http://support.microsoft.com/kb/929135#appliesto
Regards.
Melon Chen
TechNet Community Support
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

UCM 11g File missing from search result although file is accessable

When I do search without any criteria in UCM 11g, some files missing from search result although I know the files were checked into UCM already since I'm able to see these files using url similar to:
http://ucm/cs/idcplg?idcService=GET_FILE&dID=12345
or use following url to get document information:
http://ucm/cs/idcplg?idcService=DOC_INFO&dID=12345
the file is not in the search resule even search by ID.
also, the seach result say "displaying 1-20" but only display few files (e.g. 2 files, less than 20)
Is this a known problem? the same search was working in UCM 10 perfectly.
Thanks

The query seems able to retrieve the missing document. for example, I search by content ID, in the audit log (eanbled as you mentioned) give th efollowing information:
fusionappsattachments/6 09.13 06:22:03.878 IdcServer-3474 --- @ResultSet SearchResults ---
fusionappsattachments/6 09.13 06:22:03.878 IdcServer-3474 numFields=66,*numRows=1*,currentRow=0
also, the infomation following above give the deteail field information which match with the missing document.
I looks like UCM just did not bring it to UI as part of search result.
This seems match with my another finding as I mentioned earlier: the seach result say "displaying 1-20" but only display few files (e.g. 2 files, less than 20)
it seems query did find the documents but UI did not show it.
Not sure if this is a known bug.

How to Filter list/library view pages from Search Results?

Hi All,
Currently my search configuration is searching everything on a site collection. I have created custom scope for that.
But I would like to remove the search results for list/library views. The search should only show the documents, pages (but not list/library view pages).
Please guide me on this.
Appreciate your help.
Thanks,
Rahul Babar
ASP.NET, C# 4.0, Sharepoint 2007/2010, Infopath 2007/2010 Developer http://sharepoint247.wordpress.com/

Navigate to the site that contains the list or library that you want to change.
Locate and click the list or library you want to customize.
Click Site Actions, and then click Site Settings.
Under Site Administration, click Site Libraries and lists.
Click an item from the list, for example, Customize “Shared Documents.”
On the List Settings page, under General Settings, click
Advanced settings.
In the Search section, under Allow items from this document library to appear in search results, select
Yes to include all of the items in the list or library in search result or
No to exclude all items from search results.
http://office.microsoft.com/en-in/office365-sharepoint-online-enterprise-help/enable-content-to-be-searchable-HA010379092.aspx

How to remove Forms/DispForm.aspx from search results

HI
I configured enterprise search in our share point public facing portal,
and when a user search for any content why the search results are displaying from below links and when user clicks it asking authentication.
/Pages/Forms/DispForm.aspx?ID=477
/PublishingImages/Forms/DispForm.aspx?ID=3
/SiteAssets/Forms/DispForm.aspx?ID=1
/Documents/Forms/DispForm.aspx?ID=1
and how to remove these from search results .
adil

To remove from search results...
Central Administration > Application Management > Manage service applications > Search Service Application > Crawl Rules
In the Path enter: *://*/DispForm.aspx* and for the Crawl Configuration check "Exclude all items in this path" and check "Exclude complex URLs (URLs that contain question marks - ?)"
You will then need to do a crawl of your content to remove any URLs that match this path.

Remove K-Tel from search results?

I'm doubtful, but wondering if there's a way to remove K-Tel from search results, or add a column showing record label so they can be easily ignored?

Robert -
Is your custom search doing an auto-query? If yes, check the Results Display tab in the portlet defaults and ensure there is no <Blank Line> in the Displayed Attributes section.
If you are not doing an auto-query, check the properties on the Search Results pages in the Portal Design Time Pages Page Group.
Regards,
Candace

Remove material from search results

Is anyone aware of a way to remove a material from search results? I have a large contingent of materials that are no longer valid for sale and the search results create a lot of clutter. I need to retain the records for historical sales transactions but since there is no stock and the materials are discontinued, they don't need to be displayed on search.

Hi Craig,
You can do this through customising: SPRO > Logistics - General > Material Master > Tools > Maintain Search Helps
There, give double clicl to the "Search Help" = MAT1_A.
Then, select the tab "Include search helps" and select the search where you want to add a field. i.e. MAT1V - Material by Supply Area.
Once you are there, check if you can add the field LVORM - DF at client level.
Then, save the data and in this search you can have the option to see all the materials deleted or not deleted.
By the way, Narla Rama Krishna Mohan has a document about "Material Master Search Help" and it can help you too.
This is the link:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/8047f84e-7973-2c10-548a-ab4cb1c3c498?quicklink=index&overridelayout=true
Hope this help.
Kind regards,
SP

I have two new problems that started today- I can't delete drafts and I can't move emails from my inboxes to folders in mailboxesleft column ( I work on a MacBook 10.7.5- I have 2 active email accts in Apple Mail

I have two new problems that started today- I can't delete drafts and I can't move emails from my inboxes to folders in mailboxes in the far left column. I work on a MacBook 10.7.5- I have 2 active email accts in Apple Mail. Any suggestions for steps I can take short of going to genius bar?

However after part of the Itune update completed a message came up on the screen
saying "The feature you are trying to use is on a net work resource that is unavailable.
Which particular .msi file does the message go on to say cannot be found? (Several different .msi files might be mentioned in this context: itunes.msi, bonjour.msi, AppleSoftwareUpdate.msi, etc.)

Recieved email from WHICH with [Request ID :##55675##] : in the subject heading is crashing my THUNDERBIRD when I move the email from INBOX to local folders

Recieved email from Computer Help at WHICH magazine with [Request ID :##55675##] : in the subject heading is crashing my THUNDERBIRD (and other programs) when I move the email from INBOX to local folders. The only work-around found so far is to shut them down with task manager, as they wont otherwise close.
However if I move the Reply with the same subject heading from my SENT box to LOCAL FOLDERS I dont get the problem.
Hav I found a faulty software trap in the base code.
Thunderbird is up to date and it is on a 64kb intel i7 quad processor 8G ram desktop using windows 7 latest update.

To diagnose problems with Thunderbird, try one of the following:
*Restart Thunderbird with add-ons disabled (Thunderbird Safe Mode). On the Help menu, click on "Restart with Add-ons Disabled". If Thunderbird works like normal, there is an Add-on or Theme interfering with normal operations. You will need to re-enable add-ons one at a time until you locate the offender.
*Restart the operating system in '''[http://en.wikipedia.org/wiki/Safe_mode safe mode with Networking]'''. This loads only the very basics needed to start your computer while enabling an Internet connection. Click on your operating system for instructions on how to start in safe mode: [http://windows.microsoft.com/en-us/windows-8/windows-startup-settings-including-safe-mode Windows 8], [http://windows.microsoft.com/en-us/windows/start-computer-safe-mode#start-computer-safe-mode=windows-7 Windows 7], [http://windows.microsoft.com/en-us/windows/start-computer-safe-mode#start-computer-safe-mode=windows-vista Windows Vista], [http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/boot_failsafe.mspx?mfr=true" Windows XP], [http://support.apple.com/kb/ht1564 OSX]
; If safe mode for the operating system fixes the issue, there's other software in your computer that's causing problems. Possibilities include but not limited to: AV scanning, virus/malware, background downloads such as program updates.

Help with Moving Emails from Exchange Server 2013

Hi Team,
Help, I need a solution on how to copy incoming and outgoing emails together with their attachments and was hoping someone could help with a solution I need to find for this problem.
1) I have a need to copy all incoming and outgoing emails & attachments from Exchange Server 2013 mailboxes on a daily basis, so they can be archived into an external 3rd party database overnight.
I believe that the first step is that I can set up another Exchange mailbox, through Journaling to receive these emails.
Is there any way that these emails can then be moved direct from the Journaling mailbox that I have created, to a shared folder on the network? If so what format would they be sent out as e.g. .msg, .ems and what is the process?
Failing that, could they be sent to an Outlook client (not another Exchange mailbox) on the network and stored in a .pst file? (I have a program that will export them from .pst)
I would really appreciate any assistance that you can provide in this matter.
Regards, Greg.

Hi,
You can set auto-forward on journaling mailbox and auto-forward emails to another mailbox. Why don’t directly archive the emails from the journaling mailbox “an external
3rd party database”.
Thanks,
Simon Wu
TechNet Community Support

Moving email from Outlook Express on Windows XP to Leopard Mail

What are the steps I should take to move my email from a Windows XP computer running Outlook Express to my new iMac running OS X 10.5 and Mail?
I'm assuming I have to move the mailbox files from the Windows machine to the iMac and then run some kind of import.
Where are the mailbox files on the Windows machine and what are they called?
Does Mail support a direct import of those files or do I have to convert them somehow? If I have to convert them, is there an export command in Outlook Express that will do the trick? If not, what do I need to do to convert the files? Is there an application (preferably a free one that can do the trick)?
Finally, anything I should know about that could cause an import of email to choke - bad characters in folder names, too many emails in a folder, subsubfolders, etc.?
Thanks in advance,
Steve

Since there were no responses, I figured I'd post my own solution. After searching around online, there seem to be several ways to accomplish this. The first I tried was installing Thunderbird on the XP box and importing the Outlook Express email into it. This seemed to have grabbed most of my email. For some reasons a few boxes did not show up in Thunderbird though. Next step was to move the Thunderbird mailboxes over to the Leopard box and run the import process in Mail. This worked for all of my boxes except my Sent mail which choked the import routine (spinning beach ball). So, I went back into Thunderbird and split the 12K emails in the sent box into 6 separate email boxes and moved those over to the Mac. They imported fine. Then I just moved the messages back into the sent box.
That still left the few mystery mail folders that didn't import into Thunderbird. For those, I downloaded a utility that converted dbx to mbox format. Ran it on those boxes, renamed the new file extensions to mbox from mbx and moved those to the Mac and imported them into Leopard.
For some reason one box still didn't come across. But I just forwarded the 8 emails in that box to myself.
It took forever (mainly because the XP machine was so slow and because of the number of emails). But, it did work.

Error while opening file from search result in SharePoint Server 2013

Hi All,
I have configured a file system search in SharePoint serve 2013, it is crawling the data and displaying in search result.
But while click on file to open, it gives error "Cannot find 'file://filesystemPath/filename'. Make sure the path or internet address is correct.".
I have given 'Everyone' to read and execute rights on shared folder (used in file system).
Please guide me.
Thanks in advance
Dharmender Sharma

Hi,
Please check whether this issue occurred on all files or a specific file from the shared folder.
1. If this issue occurred on a specific file, please check if the file exists in the shared folder, whether someone deleted it.
2. If this issue occurred on all files , please check the network and make sure the shared folder is online
Feel free to reply if the issue still exists.
Best regards
Wendy Li
TechNet Community Support

Moving emails from outlook express to mail

is there a way to get all of my old emails from outlook express to mail? My old PC is about to die and then I'll loose all of my emails :s that is why I am wondering if there is a solution, now.

I don't know whether you can do this on a PC version of Outlook Express or not, but I know that you can do stuff like this with Apple's Mail, so it may be worth a shot to try this and see if it works.
First off, I am assuming that all this old mail is a POP account, and not IMAP. If it were IMAP, it would all be safe on your email account provider's IMAP server and all you would have to do is create the new account in Apple Mail and the first time you connected, it would autosync with the server and all your old mail would just be there. But if POP, all mail is downloaded to your computer then deleted from the server. So, assuming this to be a POP account, here is what I would try to do if I were you.
1. Go to http://webmail.aol.com and sign up for a new free IMAP email account from AOL. You could get a free gmail account if you wanted, too, but I believe there is a bit of extra configuration involved in making it a IMAP and not POP. AOL is IMAP by default. Plus, AOL is a built-in new-account setup option in Apple Mail.
2. On the PC in Outlook Express, add a new account for your new AOL email account. See http://support.microsoft.com/kb/883081 to find out all the particulars about account settings and how to do it in Outlook Express.
3. On the Mac in Apple Mail, as stated in #1 above, AOL Mail is one of the options when creating a new account. Just follow Mail's "new account wizard" to create your AOL account there.
4. On the Mac, create a second new account for your existing POP account. Mirror the individual mail folder layout that are on your old PC for the old POP account.
5. This is the part that I don't know if PC Outlook Express will let you do, but I know that Apple Mail does:
(a) Open each of your mail folders in the old POP account stored on your dying hard drive one at a time
(b) Highlight/select all the messages in that folder
(c) Drag them to the AOL inbox. In Apple Mail, they would be copied to the IMAP server, preserving all the original "From" and "Date Received" and other information like that.
6. On the Mac, drag the messages that you uploaded into the AOL inbox and drop them into the appropriate folder of the "legacy" POP account that you created in #4. That will clear them out of the AOL inbox and they will now be stored on your computer as downloaded popmails.
7. Go back to step #5 and repeat this process for each of your folders on the old PC until you have emptied all the messages off your old computer.
Now, I will have to issue a disclaimer that I have only done this myself from IMAP to IMAP and to/from IMAP from/to "On My Mac" folders, which keeps copies of messages locally but not on IMAP servers. So I have no reason to suspect that this would not apply equally to POP since it worked with "On My Mac" folders. And whether the PC's Outlook Express will support the POP-to-IMAP drag-and-drop is a total unknown to me.
I'm sure I'll hear back via this forum whether this worked or not, but it's the best idea that I can come up with, and like I said, a similar (but not identical) situation worked for me before.

Re: How can I filter out email and website results from search results?

I can't seem to add a further question to my original question.
Although with your help I found how to select (and drag!) Spotlightcategories, the next time I went to search, it used different parameters than those I'd selected. For example, I'd unchecked Mail and web pages entirely, yet mail appeared second in the search results and web pages at the bottom.
If I don't click that you helped me this time, it's because I want to keep the discussion open until I am SURE I've fixed it.
Thank you.

Setting 'Spotlight' preferences and using it to search seems to be the best answer, because it sorts results by type.
, System Preferences, Personal, Spotlight, Search Results (or clicking Spotlight Preferences at the bottom of an active search) lets you control search results by types of files quite specifically:
Message was edited by: kostby

Outlook 2013 - moving emails from search results to folders.

Similar Messages

Maybe you are looking for