Outlook 2013 standard error cannot open the outlook window. Invalid XML.

I have a user that tries to open outlook and gets this error.
( Cannot start microsoft outlook. cannot open the outlook window. Invalid XML, the view cannot be loaded.

Hi,
Try starting Outlook with the /ResetNavPane command.
Steps:
Open the run box (Win-button + R)
Type: outlook.exe /resetnavpane
http://wikiclouded.com/cannot-start-microsoft-outlook-invalid-xml-the-view-cannot-be-loaded/
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Regards,
George Zhao
TechNet Community Support

Similar Messages

"Cannot start Microsoft Outlook. Cannot open the Outlook window. The information store could not be opened." [Office 2013/Office 365]

So here is the error in Outook 2013
"Cannot start Microsoft Outlook. Cannot open the Outlook window.
The information store could not be opened."
Very Very frustrating having spent three hours today reading forums, installing, reinstalling etc.
HELP?
1) I have completely un-installed and reinstalled Outlook 2013 (And also all of Office 2013)
2) Have blown away all profiles and created new ones.
3) Have blown away all Outook data files and starting from scratch
4) Have run /resetnavpane............in an attempt to rebuild the navigation pane
5) Have gone into Registry and deleted all remnants of previous Outlook installs, HKey_Local, System Current
config......Office etc.
6) I have spent hours reading online fixes/technet forums etc..............to no avail.
Please give more suggestions.
Thanks
Phil H Charlotte, NC

Hi,
Basically you have tried a lot but the issue still exists, now one more suggestion I can provide is to make sure Outlook is not configured to run in Compatibility Mode:
Take Windows 7 for example, in Start -> Type "Outlook" in the search box -> Right click on the "Outlook 2013" shortcut -> Click Properties -> Under Compatibility tab -> Make sure "Run this program in compatibility
mode for" is clear.
This method has resolved the issue for some users in this thread below:
http://answers.microsoft.com/en-us/office/forum/office_2007-office_install/cannot-start-microsoft-office-outlook-error-cannot/e75265b4-044f-4d92-a078-1acbf9ae34d6
I hope the information is helpful.
Regards,
Melon Chen
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Cannot Start Microsoft Outlook. Cannot open the Outlook Window. The set fo folders cannot be opened. You must connect to Microsoft Exchange with the current profil

Cannot Start Microsoft Outlook. Cannot open the Outlook Window. The set fo folders cannot be opened. You must connect to Microsoft Exchange with the current profile before you can synchronize your folders with your Outlook data file (.ost)
OK. This is a new outlook setup on a laptop. The mail account is on a MS Exchange Server 2010. The user can log on to their laptop no problem with their AD login and password. To setup the outlook profile we have checked the name OK. When we click finish
and try to start outlook we get the above error message. It is driving me pots as I have tried also of things. I have tried to connect without catching the files. The error message then says that the Exchange Server is down, yet we checked the name OK and
I can log on to the MS Exchange server and see the setup.
What else is it that I need to look at as I have tried everything. I will add that they one service I see not running is the Exchange RPC service. If I try to start it, it fails saying Some services stop automatically if they are not in use by other services
or programs.
What can I do?

The major cause of this problem is a corrupted Navigation Pane settings file – profilename.xml, where “profilename” is the name of your Outlook profile. A good sign that the
file is corrupted is when the size of the file is shown 0 KB. No one knows the precise reason why this takes place, but all versions of Outlook from 2003 to 2013 may get affected.
Other causes may be when you run Outlook in the compatibility mode, or if you are using a profile generated in an older Outlook version, or if the Outlook data file (.pst or .ost)
was removed or damaged as the result of faulty uninstallation or reinstallation of MS Outlook.
Follow the steps given below to resolve this problem
1. Recover Navigation Pane configuration file
2. Repair your Outlook PST file using Inbox Repair tool
3. Create a new Outlook profil and import data from the old PST file
4. Turn off Compatibility Mode
5. Start Outlook in Safe Mode
For more info, you can visit http://www.ablebits.com/office-addins-blog/2013/12/06/cannot-start-microsoft-outlook-solutions/

Cannot start Microsoft Office Outlook. Cannot open the Outlook window.

I get the following error message when opening Microsoft Outlook (using Windows 7):
Cannot start Microsoft Office Outlook. Cannot open the Outlook window. The set of folders cannot be opened. Errors have been detected in the file.
C:/Users/owner/AppData/Local/Microsoft/Outlook/Outlook.pst.
Quit Outlook and all mail enabled applications and then use the Inbox repair tool (Scanpst.exe) to diagnose and repair errors in the file. For more information about the inbox repair tool, see Help.
I have tried the suggested fix of using the start menu, clicking "run" and then typing in "Outlook.exe /resetnavpane" and it did not work. Do I need some sort of a longer path to make this work?
I cannot find the so called "inbox repair tool" and don't know how to use "scanpst.exe".
Are all my old email folders now lost? How can I start using my Outlook email again?
Thanks for any help. Susanne

It seems to me that your emails has not been lost, perhaps your outlook folder has been lost. to get your emails back you must try one of the following ways.
Use backup file, if you have kept it in another location.
if not then go to the:
C:/Users/owner/AppData/Local/Microsoft/Outlook/Outlook.pst."
and run the scanpst,exe tool to fix the outlook error on windows 7.
If this application is not working or giving error then use a powerful PST Repair tool. which ,may become helpful for
you.
Visit here to know more: http://howto.fixscanpstexe.com

Outlook 2010 : Cannot start Microsoft Outlook. Cannot open the Outlook window.

Hi
Using Outlook 2010 with an Exchange 2003 back-end.
Already have an Outlook profile (created in Outlook 2003).
When launching Outlook 2010 I get:
"Cannot start Microsoft Outlook. Cannot open the Outlook window"
I've read several posts with this error message and a common "workaround" / "solution" was to run: “Outlook.exe /resetnavpane”
I tried that and it didnt resolve the issue.
The only way I found to resolve this was to create a new Outlook profile.
Launching with a new Outlook profile works fine.
- Is this a "known issue" ?
- Is there a way to diagnose / throubleshoot further without having to create a new profile?
Thanks
- AL

Hi,
Thank you for using Outlook IT Pro Discussions forum.
This problem can occur when file that maintains the Navigation Pane settings becomes corrupted. This file is called profilename.xml, where profilename is the name
of your Outlook profile. Normally, we can resolve this issue by starting Outlook with the command
Outlook.exe /resetnavpane
or
creating a new Outlook profile.
Next time, you may also try to rename the profilename.xml from the folder first to see if the issue can be resolved:
Windows XP: C:\Documents and Settings\username\Application Data\Microsoft\Outlook
Windows Vista, Windows 7: C:\Users\username\AppData\Roaming\Microsoft\Outlook
For more information, you can refer to this KB article:
Error starting Outlook: "Cannot start Microsoft Office Outlook. Cannot open the Outlook window."
http://support.microsoft.com/kb/2022778
Best Regards,
Sally Tang

[Flat File Source [2]] Error: Cannot open the datafile "VendorPurchases20050512.txt".

hi
I'm trying to use foreachloop container in order to read the data that i have in several txt files and upload it into MRR table.
when i'm trying to run the package, i'm getting the following error:
[Flat File Source [2]] Warning: The system cannot find the file specified.
[Flat File Source [2]] Error: Cannot open the datafile "VendorPurchases20050512.txt".
[SSIS.Pipeline] Error: Flat File Source failed the pre-execute phase and returned error code 0xC020200E.
I don't know what's the problem since it was working before.In the flat file connection manager i defined all the path including the name of the file.
I'll be happy for assistance
thanks
Yaron

Hi Yaron,
Does the file stored in local file system or a share folder on remote server? If you can load data from a file in local computer, but cannot load data from a file in a remote computer, the issue may be caused by the Kerberos authentication. In this condition,
check the following points:
Enable SQL Server for Kerberos
Check delegation settings for SQL Server service account and Computer
Add Host SPNs for FileShare Server and SQL Server
References:
http://msdn.microsoft.com/en-us/library/dd568720.aspx
http://msdn.microsoft.com/en-us/library/ms191153.aspx
Regards,
Mike Yin
TechNet Community Support

Cannot start Microsoft Outlook. Cannot open the Outlook window. The set of folders cannot be opened. The file C:\Users\accountname\AppData\Local\Microsoft\Outlook\emailaddress.ost cannot be opened.

I don't have Exchange or anything like that. I did delete the Windows 8 Mail tile, would that have done anything? I've tried deleting the .ost file and opening again, but it's still coming up. My email is also an old fairly irrelevant server (mweb.co.za).
I've looked on the Outlook 2013 pages here but nothing's working. I can't get outlook to open my gmail address either. Do I need to convert the .ost files or something?

Hi,
First, we can try to open Outlook with /resetnavpane command to check if this problem is caused by corrupted Navigation Pane settings. To do this, press Windows key + R to open the Run command, type
outlook.exe /resetnavpane and press Enter.
If the issue persists, we can try to create a new mail profile in Control Panel and set up your email account in the new profile to check the result. To create a new mail profile, please refer:
http://support.microsoft.com/kb/829918/en-us
For more troubleshooting steps, please refer to this link:
http://www.ablebits.com/office-addins-blog/2013/12/06/cannot-start-microsoft-outlook-solutions/
Hope this helps.
Regards,
Steve Fan
TechNet Community Support

Error:Cannot open the file c:\windows\sapmmc.msc

Hi Folks,
I have been using SAP IDES ECC 6.2 for a while and now all of a sudden encountered a problem CANNOT OPEN THE FILE C:\WINDOWS\SAPMMC.MSC.
I am a technical consultant and i know nothing about basis and sap installations.
Is this error so fatal? How can i fix the problem..
Thanks in advance.
Ranjith kumar.

Hi
Ranjith
Hi,
Looks like your mmc dll is corrupted, with your install and uninstall of software.
Two Options:
1. Upgrade the Kernel with latest Patch level, which comes with new SAPMMC.dll file
OR
2. Just download the SAPMMC*.sar file from service market place and extract in exe directory, since it is windows re-booting the server doesn't hurt.
Regards
Bhaskar

Error"Cannot open the file due to an unknown error. (FRM0007)" in XI3.0

When open deski document in 3-tier mode, the following error is showed"
"Cannot open the file due to an unknown error. (FRM0007)"
-It happens for all deski documents
-It works ok when opening in 2-tier mode.
-It happens on two computers
-It happens on some specific userID,and only happens when two deski are opened, one is open by specific userA,the the other is opened by userB or both are opened by userA
it is、
　DeskI - opened by UserA
　DeskI - opened by UserA
or、
　DeskI - opened by UserA　
DeskI - opened by UserB
The following is log that may be helpful.
2009/03/02 01:33:38.468|==| |X|
2812|3592|}|||||||||||||||_BOGeneralDataManager::DoRealRefresh: 0.015
2009/03/02 01:33:38.468|==| |X|
2812|3592|}|||||||||||||||_BOGeneralDataManager::DoRealRefresh: 0.015
2009/03/02 01:33:38.468|==| |X|
2812|3592|}|||||||||||||||_BOGeneralDataManager::AutomaticRefresh: 0.015

Hi Emily,
Following solution might help you to resolve the issue.
1.You create your Deski report.
2.Save as the report (with or without 'Save for all users'- makes little difference at his stage).
3.Export the document to the repository.
4.Save as the report once again with the option 'Save for all users'(overwrite the copy that already exists on the local machine).
5.Log into Info view and delete the report.
6.Log back into Desktop Intelligence and try to open the report.
Regards,
Sarbhjeet Kaur

Getting error "Cannot open the file "*****.INDD". Adobe InDesign may not support the file format, a plug-in that supports the file format may be missing, or the file may be open in another application."

How to fix this problem
"Cannot open the file "*****.INDD". Adobe InDesign may not support the file format, a plug-in that supports the file format may be missing, or the file may be open in another application."

When I have seen this message it is either when I try to open a document with an older version of Indesign E.g. an indesign 2014 document with Indesign CC.
The other time I have seen it is to open an Indesign CC document with Indesign 2014 which does not have Mindsuite - a plugin I use. Mindsuite, as yet, has not upgrade the plugin for Indesign 2014 therefore it recognises that a the document was created withe a plugin that the 2014 version does not have installed.
I believe your problem will be something like that.

Cannot start Microsoft Outlook. Cannot open the Outlook window

I have had Microsoft office 2007 Pro+ on my computer for a year...and have had no issues with the program until about 3 months ago when the this same error message appeared........Cannot start Microsoft Office Outlook Cannot open outlook window......After reinstating the program I was told by the tech I could correct this by typing Outlook/resetnavpanel and pressing the window key and R.
I am not sure how to do this. Can you help??
If i reinstall the program will that help?

Hi,
Please post your question to this forum:
http://social.technet.microsoft.com/Forums/en/outlook/threads
сила в справедливости

Lync Server 2013 Standard Deployment: Cannot Open Service Control Manager...

Hi
thanks for any advice.I've just install Lync 2013 Standard as the steps in Technet,When I publish the topology,meet the error as listed.
****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.XdsDatabase'****
Initializing DbSetupBase
Parsing parameters...
Found Parameter: SqlServer Value lync2012ek.ek2012.net\rtc.
Found Parameter: SqlFilePath Value C:\Program Files\Common Files\Microsoft Lync Server 2013\DbSetup.
Found Parameter: Publisheracct Value EK2012\RTCUniversalServerAdmins.
Found Parameter: Replicatoracct Value EK2012\RTCUniversalConfigReplicator.
Found Parameter: Consumeracct EK2012\RTCUniversalReadOnlyAdmins.
Found Parameter: Role Value master.
Trying to connect to Sql Server lync2012ek.ek2012.net\rtc. using windows authentication...
Exception Stack:
Type: System.InvalidOperationException, Message: Cannot open Service Control Manager on computer 'lync2012ek.ek2012.net'. This operation might require other privileges.
Type: System.ComponentModel.Win32Exception, Message: Access is denied.
best regards,
George
George Guo

please verify your computer name while you creating FQDN pool FQDN of Server name
example
computer name
is server1
domain name is abc.ae
so,
your FQDN pool name will be server1.abc.ae
problem solved :)

Error while opening the external window

Hi
I am trying to open an external window on click of a button.
This is the piece of code I have written
url = "http://www.google.com";
url = java.net.URLEncoder.encode( url ) ;
String title="External Window";
//IWDWindow win=wdComponentAPI.getWindowManager().createExternalWindow(url,title ,false);
IWDWindow win=wdComponentAPI.getWindowManager().createNonModalExternalWindow(url,title );
win.show();
//win.open();
I have tried both show() and open() method. and also createExtrenalWindow and CreateNonModalExtrenalWidnow. But I am getting the follwing error.
Application error occurred during request processing.
Details:   com.sap.tc.webdynpro.services.sal.core.DispatcherException: The requested deployable object 'dc.gs.com/osrch' and application 'http:' are not deployed on the server. Please check the used URL for typos.
Exception id: [0017087D8739002C0000025600001B9C00045A7873FC3E52]
This is the URL it got in the external new window..
http://<host>:50000/webdynpro/dispatcher/dc.gs.com/osrch/http%3A%2F%2Fwww.google.com
I know the www.google.com is concatenating with portal URL , hence it is throwing the error.
How to get rid of the portal path
thanks
PK

hi,
You can try the following code:
IWDWindowInfo info = wdComponentAPI.getComponentInfo().findInWindows("PopUpWindow");
    IWDWindow window = wdComponentAPI.getWindowManager().createWindow(info , true);
    window.setWindowPosition(WDWindowPos.CENTER);
    wdContext.currentContextElement().setVa_win(window);
    window.open();
This works fine.
Thanx.

Cannot start microsoft office outlook 2007. cannot open the outlook window

we have tried the following with no solution to the the problem:
-recreating the profile.
-restoring to previous date
- reloading outlook 2007 from cd
any other options?

Try starting Outlook with the /resetnavpane switch. See if this helps -
http://www.officeforlawyers.com/outlook/tsol.html#cls-B-
http://www.officeforlawyers.com
Author:
The Lawyer's Guide to Microsoft Outlook

Runtime error while opening the main window in form.

Hi,
i am getting this run time error when i am copying the standard script j_2i_pla and opening text element for changes even same problem with with standard form also below is the dump error
Runtime Errors         DATA_LENGTH_TOO_LARGE
Except.                CX_SY_RANGE_OUT_OF_BOUNDS
Date and Time          28.10.2009 10:44:20
Short text
     Invalid partial field access: Length is too large
What happened?
     Error in the ABAP Application Program
     The current ABAP program "SAPLSTXK" had to be terminated because it has
     come across a statement that unfortunately cannot be executed.
Error analysis
     An exception occurred that is explained in detail below.
     The exception, which is assigned to class 'CX_SY_RANGE_OUT_OF_BOUNDS', was not
      caught in
     procedure "TOKEN_COMMENT" "(FORM)", nor was it propagated by a RAISING clause.
     Since the caller of the procedure could not have anticipated that the
     exception would occur, the current program is terminated.
     The reason for the exception is:
     In the executed program "SAPLSTXK", the system attempted to access the field
     "ITF_TOKEN" of the type "C" and with the length 255 using the length 273.
     However, a partial field access with a length specification that is
     larger than the field length is not allowed.

Hello,
Please check the Character formats / Text stlyes/Paragarph defined within Main window, The error is because of some inconsistency withinthe layout component.
Regards,

Outlook 2013 standard error cannot open the outlook window. Invalid XML.

Similar Messages

Maybe you are looking for