Outlook 365 converting text boxes into images

Hello,
When sending out an email containing text boxes with text, links and images inside, people receive it as images.
It does not matter if you created the email as HTML or Rich Text. Same behaviour both cases.
Is there any way to avoid this issue?
Thanks
Ismael.

No, various shapes and features do not translate into HTML suitable for email and will be sent as an image instead.
Using tables instead of textboxes and shapes is the recommended way to go.
Robert Sparnaaij
[MVP-Outlook]
Outlook guides and more: HowTo-Outlook.com
Outlook Quick Tips: MSOutlook.info

Similar Messages

Creating a PDF from Word 2010 doesn't correctly convert text boxes and images

I have Acrobat 11 and my co-workers with 9 and 10 can correctly convert Word docs with images and text boxes, but v.11 cuts off the text and doesn't convert images correctly.

Hi Anubha,
I tried exporting by printing through the "File" menu as well as using the ribbon menu bar in Word 2010. Results were still not good. Below is the original Word File and then what I got when I tried to export using those two methods. I've also tried running the "Repair Acrobat Installation", but that didn't help.
-Luke
Original File
1. Converting using "File" menu
2. Converting Using Acrobat Tab in Ribbon in Word 2010

Firefox Sync setup says "Incorrect words, try again" after receiving message "Your answer was correct. Please copy and paste the text in this text box into the box below."

When setting up Firefox Sync, I get all the way to the "Please Confirm You're Not a Robot" screen in the wizard, and enter the captcha values. I then receive in a small scrollable text area the message "Your answer was correct. Please copy and paste the text in this text box into the box below."
I copy and paste the code, in this case "03AHJ_Vuv1gStVScBWSYWw6M4_KKQ4wzhCDSzKqiCfv57XXGyvHtOk4ixehysQhOTIf-lsL41lc5n-piztjYJSKu6urCeRvETVfpzRDh7OmHCDZiIBZv9Qg4oyrmWDMu6JA7Eh-4C8aZn4" into the only other visible text box, and click the next button, only to receive the message "Incorrect words, try again."
My only option is to cancel at that point. I have tried this three times, once even starting the entire process over from the start, and it ends up with the same outcome each time.

When setting up Firefox Sync, I get all the way to the "Please Confirm You're Not a Robot" screen in the wizard, and enter the captcha values. I then receive in a small scrollable text area the message "Your answer was correct. Please copy and paste the text in this text box into the box below."
I copy and paste the code, in this case "03AHJ_Vuv1gStVScBWSYWw6M4_KKQ4wzhCDSzKqiCfv57XXGyvHtOk4ixehysQhOTIf-lsL41lc5n-piztjYJSKu6urCeRvETVfpzRDh7OmHCDZiIBZv9Qg4oyrmWDMu6JA7Eh-4C8aZn4" into the only other visible text box, and click the next button, only to receive the message "Incorrect words, try again."
My only option is to cancel at that point. I have tried this three times, once even starting the entire process over from the start, and it ends up with the same outcome each time.

How to convert Doc file into image

hello frnds
Can any body guide me how to convert doc file into image and show into swf loader.
actually i have to convert doc files into swf files in runtime so that i have to use this flow.
is it possible to convert doc file into byte array and than convert into image.
Thanks And Regards
Vineet Osho

You can convert any DisplayObject to byeArray using this function ImageSnapshot.captureBitmapData().getPixels()

How can I have a button that will show/hide a text box and images on the same page?

I have a page like below:
I want to make so that those 3 buttons show different text under them when they are each pressed. How can I achieve this?
Thanks.

Hello,
Please try using Tooltip Composition Widget to achieve that..
You need to customize the trigger as the button and you can use the target to insert desired text box or images.
you can find this in Widgets library panel > composition
Please let me know in case you need any other clarification on that.
Regards
Vivek

Convert a Word text box into a PDF file

Am trying to convert a Word (2007) document that contains several text boxes in it, but they are not being converted into the PDF file. Some are though, some aren't.
Any suggestions?

When you use Adobe Acrobat for the conversion try the forum for Adobe Acrobat.

Convert text box string into integer

i have an html file in which i m using a text box , for entering amount i m using that text box entry at next jsp. i want to convert amount string into integer for further processing. At next jsp i m using:-
String amount= request.getParameter("bal");
int ammount1= Integer.parseInt(ammount);
and in sql query i m using amount1 as:-
ResultSet rs1 = st.executeQuery("update saving set balance = balance - amount1 where saving.account_no = '" + acc +"'");
my problem is i m getting following error:-
server encountered an internal error and
exception:- numberformat exception
please help me as soon as possible

int ammount1= Integer.parseInt(ammount).toString();
good to put try block too..
try
int ammount1 = Integer.parseInt(ammount).toString();
catch(NumberFormatException e)
...}

Multiple Text Boxes into One Text Box

I need multiple text boxes to populate into one text box. I've got it to work with....
a=a + "\n " + (this.getField("Other Current Illnesses 1").value)
However, if the field is blank, it gives me a blank line.   What is the code if the box is "empty" to "skip" that text box?
Here is what I tried, but it takes everything away even if there is something in the textbox:
if (this.getField("Other Current Illnesses 1").value !==null) {a=a + ""} else
a=a + "\n " + (this.getField("Other Current Illnesses 6").value)
Any help?

From the sample forms supplied with the Acrobat distribution CD, you can use the "fillin" function that can process up to 3 fields at one time and automatically adjust for null value fields and add an option separator string;
The document level function:
// Concatenate 3 strings with separators where needed
function fillin(s1, s2, s3, sep) {
Purpose: concatenate up to 3 strings with an optional separator
inputs:
s1: required input string text or empty string
s2: required input string text or empty string
s3: required input string text or empty string
sep: optional separator sting
returns:
sResult concatenated string
// variable to determine how to concatenate the strings
var test = 0; // all strings null
var sResult; // re slut string to return
// force any number string to a character string for input variables
s1 = s1.toString();
s2 = s2.toString();
s3 = s3.toString();
if(sep.toString() == undefined) sep = ''; // if sep is undefined force to null
assign a binary value for each string present
so the computed value of the strings will indicate which strings are present
when converted to a binary value
if (s1 != "") test += 1; // string 1 present add binary value: 001
if (s2 != "") test += 2; // string 2 present add binary value: 010
if (s3 != "") test += 4; // string 3 present add binary value: 100
/* return appropriate string combination based on
calculated test value as a binary value
switch (test.toString(2)) {
case "0": // no non-empty strings passed - binary 0
     sResult = "";
break;
case "1": // only string 1 present - binary 1
     sResult = s1;
break;
case "10": // only string 2 present - binary 10
     sResult = s2;
break;
case "11": // string 1 and 2 present - binary 10 + 1
     sResult = s1 + sep + s2;
break;
case "100": // only string 3 present - binary 100
     sResult = s3;
break;
case "101": // string 1 and 3 - binary 100 + 001
     sResult = s1 + sep + s3;
break;
case "110": // string 2 and 3 - binary 100 + 010
     sResult = s2 + sep + s3;
break;
case "111": // all 3 strings - binary 100 + 010 + 001
     sResult = s1 + sep + s2 + sep + s3;
break;
default: // any missed combinations
     sResult = "";
break;
return sResult;
Then a custom calculation field for a full business phone number consisting of 4 fields could be:
// Business telephone number w/country code and extension
function doFullBusinessTelephoneVoice() {
var cc = this.getField("business.telephone.voice.countrycode"); // country code;
var ac = this.getField("business.telephone.voice.areacode"); // area code;
var nu = this.getField("business.telephone.voice.number"); // exhchange and phone number;
var ex = this.getField("business.telephone.voice.extension"); // internal extension number;
event.value = fillin(cc.value, ac.value, nu.value, "-"); // first 3 fields;
event.value = fillin(event.value, ex.value, "", "-"); // combined 3 fields and internal extension;
doFullBusinessTelephoneVoice();
It looks like a lot of code, but it is easy to insert document level scripts into t pdf so the actual coding is not that much. And if one hase multiple fields that requrie multiple input fields, the coding task is even less compared to working out each field.

Convert html file into image

hello,
I want to create a templete for business card
one write name , tel, fax, and upload the logo. I want to convert this tamplete
incluisive texts and logo to an image for printing.
how to convert this tamplete into an image
Regards

SVG.

Convert text from an image to speech

Hello...I have successfully read characters from an image using OCR but I am unable to built a vi which can convert those characters of an image into sound
I have attached the image
Attachments:
1348653532_441577804_1-Pictures-of--number-plate-for-salefancy-number.jpg ‏34 KB

Hi Dilpreet
If you are on a Windows machine there is a .NET assembly that will convert text to speech. It is System.Speech
Have a look at the example below
Mike
Attachments:
Speech.vi ‏11 KB

Deleting all text boxes and images on one layer

I am designing a 240 page book where nearly every page contains at least one image and at least one text box. The book will be printed with a varnish (a fifth plate) on every image.
The printer has instructed me to set up the varnish in the following way in InDesign:
With the finished book, make a duplicate layer.
Delete all text boxes on the new layer (including page numbers)
Delete all images (but not their containers) on the new layer
Fill all the empty image containers with 100% black
I have done this previously with an even bigger book, and it did of course take several hours, and it's also easy to make mistakes. So I thought it might be possible to do this with a script - only problem is I know nothing about scripting - so I wonder if someone would be willing to help me out?
Thanks in advance! Using ID CS5.5, win xp pro sp3.

Hi Both,
I am having a similar problem.
I have to extract all images to a new layer, without modifying the size of the container.
As long as I am not an expert in scripting I have tried to do a simple code to obtain all links and go to its parent to change its itemlayer property to the new layer. But it is not what I am looking for and it has not work.
The layout of the current layer is based in tables, so images are anchored objects inside table cells, so when I run the simple script I mentioned I also get errors becuase it says the items are grouped. And even if I first run a script to ungroup everything I get the error.
I would appreciate help.
Thanks in advance.

How to change a value of input text box into uppercase?

Hi all,
In my use case I should have a text box in the jsf page and I should store the value that is entered in the text box in a database.
The requirement is the value which user enters in the text box should get changed to Uppercase
before getting saved in the database. Kindly help me in achieving this.
Thanks,
Phanindra.

hi user,
before asking any question.
right place to search anything is google (the ocean).
so the way. chris showed.
if i understood correctly means,
if you want change any input text into uppercase means :
use some skinning : -
<af:inputtext>
contentStyle = "text-transform:uppercase;"
</af:inputtext>
Or
else
are you looking for
while given inputtext saved into db.
Use something like this in as vo for each and ever attribute,
public void Desc(String value) {
setAttributeInternal(DESC, value.toUpperCase());
}

RoboHelp 11 - Text box over image does not generate to Word

Hi All,
With RoboHelp 11 and Word 10, I am trying to emulate an existing cover page for our company, which has a gray background image and a blue text box with the document title and version number. I created a topic with the background image, then placed a positioned text box over it. I added blue shading to the text box and the white lettering for the title and version. When I generate Word, the text box and text inside it do not show up in the Word output. Is there a way to get HTML > Insert features like text boxes to appear in the Word output?
Thanks,
Matt

I would create such a cover page in Word and insert that document in the print layout.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

How to paste text box into the same position

when I used
adobe acrobat 6.0, I can paste the text box in the same position in the next page, it is very useful for editing files with similiar information. after I use acrobat 9.0, I found that I can not paste the text box in the same position in the next page. do you know whether the 9.0 can realize the function of "paste in the same position"?

I am using adobe acrobat 9.0, when I use object select tool " the arrow pointing 11 clock", I can not find Duplicate command. Mr./Ms. try67, can you realize the function of paste in the same position? very thanks for your reply and help.

Convert xml file into Image file

Hi,
How to transform xml file into image file?.
i don want to transform the xml file into html file.
Thanks,
nithi

One way I can think of is to create a java.awt.BufferedImage, and use its Graphics object to print out the xml (count the lines first, and space them to your liking). Then if you want to save it to e.g. png or jpg there are free libraries for that, whose names I don't remember at the moment... Dunno why you'd wanna do this though :)

Outlook 365 converting text boxes into images

Similar Messages

Maybe you are looking for