Outlook and owa freezes every day, sometimes at the same time

Hello,
I have very strange problem! 2 users complain that the outlook hangs every day, approximately at the same time. But other 200 users work fine. I can't see any error on the mail servers ( two servers exchange 2010 sp 3 with dag) Outlook can hangs for 15 min
with user, who has mailbox 1,5 Gb and about 3-5 min with user, who has mailbox 150 Mb.
When outlook hangs, owa logon also hangs and then they start working simultaneously.
It doesn't depend on the server where I try to run owa. I tried to move mailbox to new database, but it didn't resolve my problem.
There are no any scheduled tasks on exchange servers at this time. No performans issues. Maybe some problems of connectivity with AD, but I don't see any suspicious event.

Hi,
It sounds like mailbox curroption. I'd suggest you move those two mailboxes to another mailbox database, and then try againt to see if this works.
We may also try New-MailboxRepairRequest. For more information, please refer to:
http://technet.microsoft.com/en-us/library/ff625221(v=exchg.141).aspx
http://blogs.technet.com/b/nawar/archive/2010/08/19/exchange-2010-sp1-new-mailboxrepairrequest.aspx
Hope it is helpful.
Fiona Liao
TechNet Community Support

Similar Messages

EA series 4500 and 6500 routers disconnecting once per day, everyday at the same time

I have had an EA4500 and EA6500 have the following problem:
I have time warner cable internet, Motorola SB6141 modem. The modem connects to an Ooma Telo. The 4500 and then 6500 are connected to the ooma.
I have this problem when the routers where placed in front of the ooma as well.
1 time per day, always at the same time, the router stops working. for both wired and wireless connections. i need to unplug the router to work. The modem and ooma continue to work, so i know there is internet getting passed from the modem to the ooma. However, the internet gets disruptted with the routers.
this must be a settings issue with the router. where everyday at the same time, maybe when timewarner changes over or something the router does not pick it up?? i dont know. i have gone through 2 routers and same identical problem.
thanks.

The DHCP lease time from your ISP might be set on that time that is why 2 routers are behaving the same way. And the routers may not be renewing the ip address successfully, that is why you are losing the internet connection. What you can do is to clone the mac address and you can do that by accessing the router page.
If you are using the linksys smart wifi interface, go to connectivity > internet settings > click on clone my pc's mac > click on apply.
You may also check this site for more information about intermittent connections with the router:
How To: Fixing Router Intermittent Connection Drops
http://www.smallnetbuilder.com/lanwan/lanwan-basics/24437-howtorouterdrops

Remote and direct update of master data at the same time

Hello
Is it possible to do remote and direct update of master data at the same time? If yes where it could be used?
Thanks

Hi,
What do you mean by Remote Update ?
regards
Happy Tony

How to open and save pictures from 1 folder at the same time?

Is there a way to open and save pictures from 1 folder at the same time?
I'm creating a vi that resizes the picture but I want to do it with 1 folder at a time... Is this possible?
greetings!

Hi Kway,
Here you are. I wrote a file a customer times ago & It did what you want!
Just see the attachements and keep me inform.
Regards,
Julien Roland - District Sales Manager
NI Belgium - Technical Support
Don't forget to rate a good answer
Attachments:
Test existing Files.vi ‏23 KB
Delete files from array of files (SubVI).vi ‏16 KB

Is it possible to connect the iPad to an Infocus and a remote for ppt presentations at the same time?

I've always used PC and I'm planning on making the transition to Mac. That's why I'm considering buying an iPad. Today I went to Best Buys and the Mac guy told me that it isn't possible to connect the iPad to an Infocus and a remote for ppt presentations at the same time. Is that true? I'm a speaker and that was the main reason I was considering buying an iPad, so I didn't have to carry my laptop. Thanks for your help!

Thanks for your reply. Looks like it can as I have just found this https://www.youtube.com/watch?v=nKp02y4JXVs

Error : Old and new exceptions cannot be used at the same time.

HI ALL,
i build a new exception class with message class and i want to replace the
old exception that i had in the method ,what i did is delete the exception from the method
signature and add the exception class .
the problem is that when i try to activate the method i get error :
Old and new exceptions cannot be used at the same time.
CALL FUNCTION 'CALCULATE_HASH_FOR_CHAR'
      EXPORTING
        alg            = 'MD5'
        data           = iv_iss
      IMPORTING
        hash           = lv_issu
      EXCEPTIONS
        unknown_alg    = 1
        param_error    = 2
        internal_error = 3
        OTHERS         = 4.
    IF sy-subrc <> 0.
      RAISE EXCEPTION TYPE cx_user_mng EXPORTING
      textid = cx_user_mng=>wrong_isrs.
    ENDIF.
I want to use the new exception class ,
how can i avoid this error ?
Best Regards
Edited by: Joy Stpr on Jul 22, 2009 2:56 PM
Edited by: Joy Stpr on Jul 22, 2009 3:16 PM

Hi Joy,
Check this link.
[Old and New Exceptions Cannot be used at same time|Urgent problem, give me a hand;
Old and new exceptions cannot be used the same time, what does this mean???
Regards,
Lakshman.

How can I record an Audio Instrument (saxophone) and listen to a reference track at the same time?

How can I record an Audio Instrument, and listen to a reference track at the same time?

Are you using an external audio controller or the line-in and headphone jacks on the side of your computer? You shouldn't have an issue using headphones when you're recording through the line-in but you may want to make sure you have monitoring on and it's going to the right place.
If you're using an external audio controller, try making an aggregate device combining the controller and the "built-in output" into the same device. Go to Applications/Utilities/Audio MIDI Setup, click the "+" sign at the bottom left to make a new device and check the "use" boxes to the left of the physical devices you want to use as part of that aggregate device. That is how I use the computer's speakers or headphones to monitor my input as opposed to only being able to use the output on my audio controller.
Now that I see some of the questions on the side of this page I realize that the 13" MBPs seem to have only one combined input/output jack... That is an incredibly stupid feature. What on Earth could possibly justify that design decision? I suppose if that's the problem you're having you'll have to buy some sort of splitter (if they even make them) or get an external audio controller like an Apogee Duet or something along those lines. I would be furious if they combined those two jacks on all of the MBPs.

In windows how do we install and activite multiple versions of tuxedo at the same time ?

Hi All,
In windows how do we install and activate multiple versions of tuxedo at the same time ?
Advance wishes

You can run different versions of Tuxedo on the same server, as long as they are installed in different directories.
See PeopleTools 8.53 installation manual Task 3-1: Installing Oracle Tuxedo
You can install Oracle Tuxedo once for each release on a machine, regardless of the number of PeopleSoft
applications or databases the server supports. For example, if you are a PeopleSoft 9.1 customer and have
Oracle Tuxedo 6.5 installed, you may install Oracle Tuxedo 6.5 and Oracle Tuxedo 11gR1 on the same
machine in separate directories. For example:
On Windows, you may install into C:\oracle\tuxedo11gR1_VS2010 and C:\tux65.
On UNIX, you may install into /home/oracle/tuxedo11gR1 and /prod/tuxedo/6.5.
E-TUX: Can Multiple Versions of Tuxedo Coexist on One Physical UNIX or Linux Server? (Doc ID 607828.1)

HT1442 install and run mac os 10.4 at the same time mountain lion 10.8

nstall and run mac os 10.4 at the same time mountain lion 10.8

I was able to install Intel Tiger into VMWare Fusion 2.0; I was never successful at installing it in VMWare Fusion 4.
If you have had success in version 4, please let us know how to do it! Thanks!

I recently bought a 4th generation ipod shuffle. Am I able to have both music and audio podcasts loaded on it at the same time?

I have not been able to include both music and audio podcasts on my shuffle at the same time. Is this possible with the shuffle?

I disabled all my computer's firewalls and sure enough, IT WORKED!! My iPod is updated and just now finishing restoring! Thank you SOOOO SOOO much. : D

When im facetiming with someone and im watching a youtube video at the same time, the volume for the youtube video is lowered and the facetime volume stays the same, how can i change that?

When im facetiming with someone and im watching a youtube video at the same time, the volume for the youtube video is lowered and the facetime volume stays the same, how can i change that?

Have you ever even used skype on an iphone or ipod? We tried it and there is no way to type to each other while you are video chatting. You can do the typing during the video on a COMPUTER, but not on an iphone or ipod.

Outlook Anywhere Loosing connection : Outlook Event id 26 and Exchange IIS HTTPERR Log : Connection_Dropped_List_Full at the same time

Hi,
I have a Windows 2008R2 Updated / Exchange 2010 SP3 Rollup 7 (Role CAS,HUB,MBX) with only external users connection : ActiveSync, EWS, OWA, Outlook Anywhere.
4 processors and 24Go of memory are allocated to the Exchange server VM (VMWare).
Netscaller is used as reverse proxy in DMZ.
There is around 500 users connecting with Outlook Anywhere to Exchange. Users are using Outlook 2010 or 2013 with last updates and cache mode enabled (owner mailbox and delegations). Users are location all around the world (around 50 sites). So no users
is domain integrated.
Users are complaining about disconnection, and Outlook freeze (Outlook is not responding). This happened at any point of time during the day, and for different kind of actions (Outlook is just open, Try to press Send button, try to press Transfer button).
The freeze happened randomly for users. I have seen the problem, and Outlook sometimes freeze during few seconds, sometimes during 5 minutes without any reason. (no file copy, no action asked...)
I noticed that freeze are matching with the Outlook event id 26 on the workstation (Connection to the Microsoft Exchange Server has been lost. Outlook will restore the connection when possible). Also, at the same time, I can see around 200 lines in
the IIS HTTPERR Log (Exchange Server : C:\Windows\System32\LogFiles\HTTPERR) the following lines:
2014-11-20 10:39:43 NETSCALLERIP PORT EXCHANGEIP 443 HTTP/1.1 RPC_OUT_DATA /rpc/rpcproxy.dll?EXCHANGEFQDN:6004 - 1 Connection_Dropped_List_Full MSExchangeOutlookAnyWhere
2014-11-20 10:39:43 NETSCALLERIP PORT EXCHANGEIP 443 HTTP/1.1 RPC_OUT_DATA /rpc/rpcproxy.dll?EXCHANGEFQDN:6001 - 1 Connection_Dropped_List_Full MSExchangeOutlookAnyWhere
What has been already checked :
Check IOPS: seems to be normal
Check Processor consumption: seems to be normal
Netscaller TimeOut = 8h
Bandwidth where the server is hosted : more than enough
Bandwidth of client internet connection : Traffic do not increase when the problem happen
Firewall TimeOut : seems to be ok
Firewall Protocol Filter : seem to be ok
Workstation MTU : Ok : ping -l -f 1472 = Ok, so best MTU = 1500 (1472+28)
Outlook Profile : Clean Up OST, sync of all folders, download address book.
wireshark on workstation : nothing seems to be wrong but difficult to analyse, so I maybe missed something.
Configuration change on Exchange :
HKLM\Software\Policies\Microsoft\Windows NT\RPC\MinimumConnectionTimeout = 120
Disable throttling Policy
Adsiedit, change Max Memory alloc for ESE : msExchESEParamCacheSizeMax = 327680 (around 10GB) msExchESEParamCacheSizeMin = 131072 (around 4GB
Adsiedit, change Min Memory alloc for ESE : msExchESEParamCacheSizeMin = 131072 (around 4GB)
Host file : add hostname and FQDN of Exchange Server
Disable IPV6 : HKLM\System\CurrentControlSet\services\TCPIP6\Parameters\DisabledComponents = HEX 0xffffffff
IIS : system.applicationHost : webLimits : minBytesPerSecond = 0
Create dedicated IIS AppPool MSExchangeOutlookAnyWhere for /RPC and /RPCWithCert
AppPool MSExchangeOutlookAnyWhere : Regular Time Interval (minutes) : 0
AppPool MSExchangeOutlookAnyWhere : Queue Length : 20000 (Should be the solution but not working)
netsh int tcp set global chimney=disabled
netsh int tcp set global rss=disabled
HKLM\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\MaxUserPort = 65534
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\KeepAliveTime : 300000
HKLM\SYSTEM\CurrentControlSet\Services\Netlogon\Parameters\MaxConcurrentAPI = 150
IIS machine.config : <system.web> : requestQueueLimit="65535"
Microsoft.Exchange.RpcClientAccess.Service.exe.config <add key=”LoggingTag” value=”ConnectDisconnect, Logon, Failures, ApplicationData, Warnings, Throttling”/>
Uninstall All agents (except Backup Agent)
Uninstall Antivirus
Will be done tonight :
Exchange and DCs : HKLM\SYSTEM\CurrentControlSet\Services\Netlogon\Parameters\MaxConcurrentAPI = 100
Exchange IIS : Increase AppPool MSExchangeOutlookAnyWhere Queue Length to 40000
Exchange : decrease HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\KeepAliveTime to 60000
You're welcome if you have any idea.
Thanks.
Jo.

Hi,
Thanks for your answer. Here are my comments :
1. Disable IPv6 then restart your Exchange server
Already done since the install of Exchange.
2. Confirm if there is any NLB device in your environment, please remove NLB firm client server
There is only one Exchange server in the Org. So no NLB installed on the server (NLB is used on the Netscaller used as a reverse proxy). In Addition, the article apply for Windows 2008, or the server is installed with Windows 2008 R2.
3. If there is a proxy server configured in IE, please uncheck it
I guess you are talking on the client side. There is no proxy on the client side, Outlook Anywhere connect directly to the internet.
4. Collect more error logs in Event Viewer in Exchange and collect the IIS logs in
folder “c:\inetpub\logs\logfiles\W3SVC1”
the error I reported in the description is from IIS, and always appear when end users report a problem. In W3SVC1 file, there is also errors, but those one appear even if Outlook clients are working fine. So I cannot isolate any specific
error. The most common from W3SVC1 log are :
2014-11-25 08:02:17 EXCHANGEIP POST /autodiscover/autodiscover.xml - 443 - NETSCALLERIP Microsoft+Office/15.0+(Windows+NT+6.1;+Microsoft+Outlook+15.0.4667;+Pro)
401 1 2148074254 0
2014-11-25 08:02:17 EXCHANGEIP POST /EWS/Exchange.asmx - 443 - NETSCALLERIP Mac_OS_X/10.9.5+(13F34)+CalendarAgent/176.2
401 1 2148074254 0
2014-11-25 08:02:18 EXCHANGEIP POST /EWS/Exchange.asmx - 443 - NETSCALLERIP Microsoft+Office/14.0+(Windows+NT+6.1;+Microsoft+Outlook+14.0.7128;+Pro)
401 1 2148074254 0
Regards,
Jo.

Reading and Writing from a text file at the same time

I know who to use the Scanner and PrintWriter to read from and write to a .txt file. But these are limited. How can I read and write at the same time? Such as open a file and change every third character or change every second word to something else and then write it back. I found this [http://java.sun.com/docs/books/tutorial/essential/io/|http://java.sun.com/docs/books/tutorial/essential/io/] but its a little over my head. Is this the only way to do it?

wrote:
You are using buffered reads and writes I would assume, right? Also, how do you think most programs handle this sort of thing? I don't believe I'm using buffering.
My code looks something like this
//...necessary imports
//then
Scanner inFile = new Scanner (new file("filename1.txt"));
PrintWriter outFile = new PrintWriter ("filename2.txt");
//then stuff like
int x = inFile.hasNextInt();
outFile.println(x);
camickr wrote:If you are changing the data "in place", that is none of the data in the file is shifted, then you can use a RandomAccessFile.
Otherwise, you've been given the answer above.What is RandomAccessFile? Is it what I have a link to? Basically what I do is I write a bunch of numbers to a txt file and then change the numbers I don't need anymore to 0. So say I had 0 1 2 3 4 5 6 7 etc. I would like to to open the txt file and change every second one to 0 so then I'd have only odd numbers and 0s.
I looked at the documentation for RandomAccessFile and it seems like it might be what I need.
Thankyou both for your help so far. I took a java course in high school and they only taught me one way to get data from text files and that is what I just showed you. So maybe this questions are really stupid. lol
Edited by: qw3n on Jun 13, 2009 7:46 PM

Whats an app that my boyfriend and I can use to video chat and text (type to each other) at the same time?

I have an Ipod Touch and he has an Iphone 4. We have tried tango, but the audio on it is awful. He has 4g but on certain apps he has to have wifi to use them, like facetime, but he doesnt have wifi. So I have facetime on my ipod touch, and i have wifi, but he doesnt! so It needs to be an app that can be accessed with wifi AND 4g. So we need this app to allow us to do video, and at the same time type to each other on the screen. ( or at the bottom of the screen, whichever.) Because for some reason on the different video apps we've tried he can never hear me, and sometimes i cant hear him. I dont always have a very good signal, so if we couild just have the video we would be fine with just typing to each other. Also I'm staying at a hotel with my parents and they sleep early and i dont want to wake them, so typing to each other would be very ideal. Anyone know of an app that can do these things?
Please Help,
Sarita

Have you ever even used skype on an iphone or ipod? We tried it and there is no way to type to each other while you are video chatting. You can do the typing during the video on a COMPUTER, but not on an iphone or ipod.

How can I show "Playlists" and "My music" side by side at the same time?

This was possible in the previous version of iTunes. When showing Playlist and My music at the same time it was easy to draw tunes from My music to the right Playlist.
My version of iTunes is 12.0.1.26.

Thanks for reply
ya ~ i've got a solution ~
actually i am doing a server for mobile phone to get data. Sometime 1 single ID will send twice a message (usually nokXX mobile phones) .. i use milli sec to check those message ....
n it seems working ....

Outlook and owa freezes every day, sometimes at the same time

Similar Messages

Maybe you are looking for