Outlook cant open PST permissions issue after server migration

Yesterday I spent the day consolidating files on our server.Users my Doc folders are redirected to the server.I moved the central file share \\server\User Home Folders$ from the soon to be decommissioned G: volume to the New central storage D:I used emcopy64 for this to retain all file permissions and owner etc.This is the command I used:G:\emcopy64 "g:\User Home Folders" "d:\User Home Folders" /o /s /secforce /c /r
:3 /sdd /w:5 /log:"d:\emclog/txt"Then I stopped sharing on g:\User Home Folders and enabled sharing on d:\User Home Folders with the same name and permissions. I checked and all attributes, ownership, time stamps and NTFS permissions followed nicely, it felt great. Then this morning as I was starting things up before anyone got into work, I discovered it. When outlook 2010 was started it reported "Access is denied. You don't...
This topic first appeared in the Spiceworks Community

Great little pod cast.
EXCLUSIVE INTERVIEW WITH THE WALL OF SOUNDINVENTORNever before heard stories of the GratefulDead's Wall of Sound from its inventor, Bob Heil. Heil used all the knowledgehe gained from Paul W. Klipsch to create the modern architecture for live rockaudio as we know it today. LEARN MOREhttp://www.klipsch.com/blog/wpwk-podcast-ep-5-bob-heil-pwk-grateful-dead/?utm_source=Shopatron+Email...

Similar Messages

Cant open doc files from the server on MacBook Air after upgrading to Maverick

Cant open doc files from the server on MacBook Air after upgrading to Maverick, I can only open up docx file. Thank you!

Thanks for the suggestion! I don't use Phantasm or VectorScribe (or any Astute Graphics plugins for that matter). I do, however, have a Wacom tablet and have a few plugins that concern using Blurb Book Creator as well as LiveSurface Context.
I did the very unfortunate and foolish act of upgrading to Maverick without a backup, so postponing isn't an option for me.
I geuss my question at this point would be, would it be worthwhile to wipe all the adobe products from my harddrive and re-install them? Or would that be a useless endeavor.
I don't have an external hard-drive so backing up and re-installing the entire OS would be a bit much. Any suggestions?

I cant open adobe acrobat pro after just paying for it and downloading it!!

I cant open adobe acrobat pro after just paying for it and downloading it!!

What is your operating system? Acrobat version?
What exactly happens when you try to open it?

Cant opened link I got after recieving a serial number for photoshop

I cant open my download link after entering my redemption code and getting a serial number for photoshop elements. I pressed save and run. it went to my downloads but when I tried to open it nothing happened.

What system? What browser? As a start, try using another one. Also refer to this:
Download Photoshop Elements products | 13, 12, 11, 10
Mylenium

Cant open my ipad 2 after i upgrade it to IOS 7.1 what will i do

i cant open my ipad 2 after i upgrade it in IOS 7.1 what should i doipa

Try reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.

System performance degrades after server migration ???

Hi Friends,
System performance degrades after we migrate our BW 3.5 Server (Production) from UK to Germany.
for details :
1. Data is coming to Informatica server from Informatica its going to POSDM Server (Point of Sales Data Management) from POSDM we are running pipes and data is coming to BW (Delta Queqe)
so before Server Migration it was taking 2 Hrs to load 4 Million Records
After Server Migration it is taking 4 Hrs.
Please help out to find the reason for this.
Note : Server Ram , Hard Disk , Speed is same on both Servers
Thanks
Asim

Note : Server Ram , Hard Disk , Speed is same on both Servers
Are you cahnge any application or database parameter (the OS and all patch'es are the same?)
How you doing migration? Very low information... Are you check the network configuration are the same( for example check the network speed 1G or 100MB).
Are you trying to analyse the St03N and St04 t-codes?
Regards.

Permissions Issues after java update...

So, I noticed after I got the java update awhile back that the permissions associated with it are wrong.
disk utility tries to repair it, claims it does, but still needs to be repaired afterwards. anybody else have this issue, so would it be normal?
I can post the output from disk utility if you guys need it.

It's normal. Not all permissions issues are ever resolved with any update. Unfortunately ever since 10.1.5 had permissions repair features, it never has 100% eradicated permissions issues. Though repairing permissions before and after each update helps, you'll never see a message that all permissions are repaired. As long as there aren't any other issues, I wouldn't worry about it.
Message was edited by: a brody

Cant open Photoshop CC 2014, after opening getting a mesage @Photoshop has stop working@

Cant open photoshop in CC

Hi,
If you're on windows,open your device manager ,check under video cards ,if you have 2 cards ,deactivate one of them ( integrated one ,normally intel ).
Retry .

Security issues after catalog migration

Hello,
We have installed a new Sys (11.1.1.7.0) environment and now need to migrate the OBI objects from Dev (11.1.1.7.0). Everything works as expected in Dev with logging in and viewing the appropriate dashboards according to users permissions. Now, after the migrating to Sys when we try to login to hostname:9704/analytics all users cannot see the dashboard and catalog objects. Even Weblogic can't see any. I can view the catalog objects in offline mode via the Catalog Manager or Windows Explorer. If I look at the Catalog through the Catalog Manager my permissions do not allow me to view any objects under Shared Folders; however, in Dev I'm able to do so. It seems something is out of sync btwn the catalog and the Policy store even though users have the appropriate groups assigned in the weblogic LDAP. Any ideas on what might be happening or how to resolve?
Migration process:
1) Migrated Policy Store and Identity store from Dev to Sys. Confirmed objects were migrated.
2) Migrated RPD and Catalog from Dev to Sys. Confirmed objects were migrated.
3) Refreshed GUIDs in Sys
4) services successfully start
Regards,
Mike

Hi Saichand.
I'm working with Mike on this permissions issue, and can provide some feedback.
I'm comparing the "Shared Folders" privileges between two environments, DEV(works) and TEST(not working).
The DEV environment has:
Name - Permission - Details - Type
-- Authenticated User - Full Control - Full Control - Application Role
-- Presentation Server Admins - Full Control - Full Control - Catalog Role
The TEST environment has:
Name - Permission - Details - Type
-- BI Admin Role - Full Control - Full Control - Application Role
-- BI Consumer Role - Custom...- Read, Travers, etc. - Application Role
I'm changing the TEST environment to mirror our functioning DEV permissions:
Name - Permission - Details - Type
-- Authenticated User - Full Control - Full Control - Application Role
-- Presentation Server Admins - Full Control - Full Control - Application Role
I am now able to login as my Administrator user and have access to the appropriate objects.
I still have a couple questions I'm hoping you can clear up though.
1) Something in our migration process to our TEST environ. must have updated the Shared Folders privileges to not include the Authenticated User & Presentation Server Admins roles/groups. This is odd, since we migrated the entire environment from our functioning DEV environ. Any insight into what we did/missed would be helpful.
2) Re. "Shared Folders" permissions on my DEV server vs. TEST server, the role type is "Catalog" on one, and "Application" on the other. How did we accomplish converting the Role from a Catalog to an App role going from DEV to TEST?
DEV:
Name - - Type
-- Presentation Server Admins - - Catalog Role
TEST:
Name - - Type
-- Presentation Server Admins - - Application Role
Much obliged.
Ben

ECP redirect to OWA after server migration

I have an odd problem with my Exchange 2013 environment after a migration (moving of a server).
My Exchange environment is as follows:
2 x CAS/MBX servers (physical machines)
1 x CAS server (virtual machine used for internal ECP access only)
All machines were in the same site
We have two sites and we wanted the virtual CAS server to be moved to our datacentre as part of a DR strategy (it will have the MBX role installed eventually, but initially it will remain a CAS).
So I powered down the virtual machine, cloned it and moved the clone to the datacenter (all using VMWare). Brought it back up and re-addressed the network card with the correct IP for the new network it is now in.
I ran tests such as accessing the ECP both from within the datacenter and from our primary site and I was able to access the ECP without issue and create mailboxes etc. However this morning when I came in and attempted to access the ECP with my admin account
that has always previously worked I am now being redirected to OWA???
I cannot think of a reason as to why this would be happening.
Is anyone able to offer an advice?
Kind regards

Hi George,
Agree with Sathish. Please use the following URL from Exchange CAS server and check the result.
https://localhost/ecp/?ExchClientVer=15
Here is a thread for your reference.
ECP redirects to OWA in Exchange 2013
http://social.technet.microsoft.com/Forums/en-US/34ed5347-90f9-4ab7-91c3-9665f8ace432/ecp-redirects-to-owa-in-exchange-2013?forum=exchangesvradminlegacy
Hope this can be helpful to you.
Best regards,
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Amy Wang
TechNet Community Support

SM59 "Remote Logon" malfunctions after server migration

Hi all,
Originally our BW server is running under I386 platform. And the server seems not powerful enough, so we decided to migrate the server to IA64 platform.
After we migrated the server to the IA64 platform, we've performed some basic checking, including SM59 check. But problem occurs.
After I choose one of the RFC destination from SM59, I CAN execute the "Connection Test" and "Unicode Test" correctly. But when I press the button "Remote Logon", nothing happens.
I've also checked for the developer trace and nothing can be found. So I have also updated the Kernel to the latest version but the result is still the same ("Remote Logon" malfunctions).
Do you have any idea?
Many Many Thanks.
Best Regards,
Marco

> Originally our BW server is running under I386 platform. And the server seems not powerful enough, so we decided to migrate the server to IA64 platform.
Oh - IA64 - x86_64 would have been as powerful (or even more) and cheaper but neverless - to your problem:
> After I choose one of the RFC destination from SM59, I CAN execute the "Connection Test" and "Unicode Test" correctly. But when I press the button "Remote Logon", nothing happens.
Is the user provided a DIALOG user on the remote system? If not, then you can't logon.
Markus

Outlook settings with ME email account after iCloud migration

what are the incoming and outgoing server settings for the .me account after i migrated to icloud? the 'mail.me.com' and 'smtp.me.com' deliver an error.

Please see this page:
http://support.apple.com/kb/HT4864

ZCC fails to login after server migration from 32 to 64 bit

After I migrated my Primary server from 32 to 64 bit I can not login into ZCC. Page give me the following error:
JDBC Driver class not found: Sybase.jdbc4.sqlanywhere.IDriver
I migrated a Windows 2003 32 bit with Zenworks 11.2.4 to Windows 2008 R2 SP1 64 bit with Zenworks 11.2.4 in same zone. I would like to move to zenworks 11.3 but the documents show I need my Primary server to be 64 bit.
My Primary server is my CA and has the embedded Sybase database.

Originally Posted by nop1983
Here you go...
https://www.novell.com/documentation...a/bj3xt3x.html
So you've only got one server?
yes, I only had 1 server in the zone and needed to move from windows 2003 32bit to windows2008 r2 64 bit.

Outlook Users connection issues after Mailbox Migration from 2007 to 2013

Hi,
We have a coexistance between Exchange 2007 SP3 and Exchange 2013 CU7. There is an issue when after migrating the user from exchange 2007 mailbox to exchange 2013, the outlook keeps on prompting for password when it is being launched. Checking the Connection
Status we found that there is a connection to the old 2007 Server and the type is Exchange Public Folder. I have migrated the public folder and checked the Mailbox of the user and found that the DefaultPublicFolderMailbox is set to the 2013 Public Folder Mailbox.
If I check my 2013 MailboxDatabase Properties, It sill shows that PublicFolderDatabase Properties is still pointing to the 2007 Public Folder Database. Any resolution on this?
Another issue is, We set outlook anywhere on the 2013 to use basic authentication, however, when users are migrated to 2013 the Outlook client changes to NTLM. even if we set the outlook to basic to make it work, it still comes back to NTLM after a while.
I did most of the resolutions online to use powershell to make changes to outlook anywhere but no luck. any suggestions is highly appreciated.
Thanks & Regards,
Arthur

Hi,
For the first problem, please check the msExchHomePublicMDB attribute for mailbox database in Exchange 2013, you can check this attribute in ADSIEdit.
If this attribute is pointing to Exchange 2007 public folder database, please set to blank. After that, please restart the information service.
And for the second question, I suggest we open a new case for this issue. In order to avoid confusion and keep track of troubleshooting steps, we usually troubleshoot one
issue per thread in order to find a resolution efficiently.
Thanks for your understanding.
Best regards,
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Belinda Ma
TechNet Community Support

Permissions issue after Mavericks upgrade

I have just updated an early 2008 IMac with OSX Mavericks.
All software running fine, but I noticed occassionally I was getting an authentication prompt on some files, didn't follow, but simply authenticated as and when I need to, I assumed it was when I moved files from my Mac Pro to my Imac.
Having run the upgrade however, I get an error message to contact the vendor (Battlefront) as my copy of Combat Mission Battle for Normandy has lost its license.
After the upgrade I had also purchased from the same vendor Combat Mission Fortress Italy. Having downloaded this and gone to run after copying to applications, this software gives me an error message saying unknown developer so I have got no where near installing a license.
Having contacted the vendor and tried to get a work around, I am now getting the message it is you Mac not our software, despite the fact that all my other software is working fine (and the fact that the Combat Mission Battle for Normandy game worked fine until the upgrade).
I do feel some sympathy for them, I do think the Mac has some sort of permission issue - I also probably compounded this by deleting a user which I did not recognise called 'wheel' which I suspect now is some form of default permisison.
Anyone got any ideas, how do I 'reset' the system - I have tried fixing the permissions through disk utility.
My vendor got me to run a sudo command through Terminal, but I got the message...
sudo: unable to stat /etc/sudoers: Permission denied
sudo: no valid sudoers sources found, quitting

Update Saturday Jan 4, 2014
Before my Mavericks upgrade on my Mac Pro, no problems ever (use my Mac 4-8 hours a day) using my Bose Companion 5 USB connected speakers. I've tried shutting the Mac down and plugging the Bose USB cable into another open USB port = no joy and other combinations. I tested the same Bose Companion 5 USB speakers on two other laptops with NO issues (ouch...they were running Windows 7) I have deleted the two .plist files, did the CMD+OPT+P+R reset, etc... = no change. Looked into Midi Audio Setup and did not see anything in there to change even though I tried a couple of things and no avail (there was no Garageband setting/entry).
I still get a solid "BEEEEEEEEP" sound every 20+ seconds, when the sounds tries to toggle, by itself, between the Bose USB Audio device and the Internal Speakers.

Outlook cant open PST permissions issue after server migration

Similar Messages

Maybe you are looking for