Outlook clients with SL server and ICAL/Addressbook server

Hi!
I have a customer intrested in replacing their old SSB 2003 server with an SL server. I wonder if this combo can accommodate their calendaring needs.
- They need to view eachothers calendars side by side in outlook
- They need to have shared calendars with read/write access
- Central store for contacts
They want the experience to closely reassemble Outlook/Exchange, but are prepared to make some changes in working methods if nessecary.
Is this even possible or are they forced to move to a new SBS 2008 server instead? They are only 7 in the office, so doing witout an expensive SBS 2008 server would save them around 5000$ in investments.
/Hasse

Can't I just set up Exchange as one of my calendars in ical?
Only if you're running Snow Leopard and your employer will allow access (different than iPhone/mobile device access, so most likely not), but not needed - keep reading.
Is it really true that I have to choose between syncing Exchange with work server OR syncing iCal with personal Macbook?
No. It was true, but with the v3.0 software that changed - you can now sync your Exchange contacts and calendar over the air, and your Address Book and iCal via iTunes over the docking cable.
What is the best work around for this?
None needed. When you set up the exchange account, and choose to turn on syncing of contacts and calendars, you will be prompted to remove all other data, or keep it on the iPhone. Choose the keep option. Note that in that case, your personal data will not be uploaded to the Exchange server - the iPhone keeps them separate (although you can choose to view them in a merged fashion).
I have this set up on my phone (Exchange calendar along side personal and other calendars from iCal). Same for contacts. Works great.

Similar Messages

Calendar server and address book server login fails with outlook connector

Hi all,
I have installed Java Communication Suite 5 according to the doc http://blogs.sun.com/factotum/resource/comms5-install-linux.html.
When i deploy the connector i get the pop ups saying "Server:servername:3080
Error:service not available" also
"Server:servername:80/uwc"
Error:service not available"
asking to login to calendar server and address book server.Clicking "OK" allows install.
In outlook i can send and receive mails but not the meeting requests.It gives the error "login to calendar server" when i create a meeting request.
Please let me know what i have to do to get rid of the error.The username and passwd entered is correct.
Regards,
lmeenakshy

Hi,
When i deploy the connector i get the pop ups saying
"Server:servername:3080
Error:service not available" also Do you get exactly what you say above, or have you substituted in the real server name for "Server:servername:" above?
I would check through the outlook connector deployment configuration to verify that you have inserted valid information into all of the host & port fields - perhaps check the .ini file that is created to see if it has "Server" and "servername" listed.
"Server:servername:80/uwc"
Error:service not available"You are able to log into UWC via the web-interface and access your calendar/pab and edit/modify/delete calendar & addressbook entries right? The services are all up?
asking to login to calendar server and address book
server.Clicking "OK" allows install.The outlook connector deployment software gives you the option to increase the logging level, try that and see what the logs say - what was it trying to connect to/check which failed.
In outlook i can send and receive mails but not the
meeting requests.It gives the error "login to
calendar server" when i create a meeting request.
Please let me know what i have to do to get rid of
the error.The username and passwd entered is
correct.I suspect this is more of an underlying configuration issue that needs to be sorted out, once that happens you shouldn't have to keep logging in.
Regards,
Shane.

Issue with Information broadcasting and pre-cal server in SAP BI

Hi Experts,
I have issue with information Broadcasting and Pre-cal server. I have a worrkbook whcih runs from information broadcasting in pre-cal server. Workbook is desinged on single query and workbook contains visual basic code. workbook has a variable which is controlled by Control query in information broadcasting.
I have 20 employees every month I need to send workbook via e-mail from information broadcasting. The problem is sometimes all 20 employees will recieve e-mails and sometimes not. I identified there is something wrong in workbook or in pre-cal server.
because after workbook calculation in pre-cal server is not pushing to SOST so there is something wrong in workbook or in pre-cal server.
I closely observed pre-cal server front end log. There are few operations performing on workbook in pre-cal server
like Open workbook, Calculate workbook, Save woorkbook and close workbook. In success case pre-cal sever is performing all the operations but in failure case pre-cal server is missing Close workbook case.
Below log In pulled from pre-cal server
Can you please tell what could be the problem.
Successful job
3/11/2011 9:29:46 AM (3) -> RS_PREC_LAUNCH_EXCEL i nvoked in thread 3 and job 'BIBCAST4L4EIS7TOR5BWG0
2PCUG9ZPPP'. nvoked in thread 3 and job 'BIBCAST4L4EIS7TOR5BWG0
3/11/2011 9:29:46 AM (3) -> InitConnection in thre ad 3
3/11/2011 9:29:46 AM (3) -> Trying to open "C:\Pro gram Files\Common Files\SAP Shared\BW\BExAnalyzer.
xla" gram Files\Common Files\SAP Shared\BW\BExAnalyzer.
3/11/2011 9:30:18 AM (4) -> RS_PREC_GET_SERVER_STA TUS invoked.
3/11/2011 9:30:18 AM (4) -> RS_PREC_GET_SERVER_STA TUS finished
3/11/2011 9:30:35 AM (3) -> Using Version 7100.4.1 200.35 of BExAnalyzer.xla
3/11/2011 9:30:35 AM (3) -> PID of Excel process: "2504"
3/11/2011 9:30:35 AM (3) -> EndOfInitConnection in thread 3
3/11/2011 9:30:35 AM (3) -> RS_PREC_LAUNCH_EXCEL f inished
3/11/2011 9:30:36 AM (0) -> Calculation Request 91 1A35ED029D4D79DD7A000200000000 received for job 'B
IBCAST4L4EIS7TOR5BWG02PCUG9ZPPP'. 1A35ED029D4D79DD7A000200000000 received for job 'B
3/11/2011 9:30:52 AM (6) -> RS_PREC_GET_SERVER_STA TUS invoked.
3/11/2011 9:30:52 AM (6) -> RS_PREC_GET_SERVER_STA TUS finished
3/11/2011 9:31:22 AM (0) -> Opening workbook: C:\W INDOWS\TEMP\BW\Analyzer\Workbooks\SAPBEXPRECMML4NN
DVLYAPC2SYIC7F1AAIO_0.xls INDOWS\TEMP\BW\Analyzer\Workbooks\SAPBEXPRECMML4NN
3/11/2011 9:31:43 AM (0) -> Refresh BExAnalyzer.xl a!MenuRefreshPrecalc returned with 1.
3/11/2011 9:31:43 AM (0) -> Calculated workbook C: \WINDOWS\TEMP\BW\Analyzer\Workbooks
SAPBEXPRECMML
4NNDVLYAPC2SYIC7F1AAIO_0.xls saved. \WINDOWS\TEMP\BW\Analyzer\Workbooks
SAPBEXPRECMML
3/11/2011 9:31:43 AM (0) -> Calculated workbook C: \WINDOWS\TEMP\BW\Analyzer\Workbooks
SAPBEXPRECMML
4NNDVLYAPC2SYIC7F1AAIO_0.xls closed. \WINDOWS\TEMP\BW\Analyzer\Workbooks
SAPBEXPRECMML
3/11/2011 9:31:44 AM (0) -> Excel based operations finished.
Failure job
3/10/2011 10:22:58 AM (1) -> RS_PREC_LAUNCH_EXCEL invoked in thread 1 and job 'BIBCAST4L41566ZBZDN2N
TGJR0462ZFX'. invoked in thread 1 and job 'BIBCAST4L41566ZBZDN2N
3/10/2011 10:22:58 AM (1) -> InitConnection in thr ead 1
3/10/2011 10:22:58 AM (1) -> Trying to open "C:\Pr ogram Files\Common Files\SAP Shared\BW\BExAnalyzer
.xla" ogram Files\Common Files\SAP Shared\BW\BExAnalyzer
3/10/2011 10:23:20 AM (3) -> RS_PREC_GET_SERVER_ST ATUS invoked.
3/10/2011 10:23:20 AM (3) -> RS_PREC_GET_SERVER_ST ATUS finished
3/10/2011 10:23:44 AM (1) -> Using Version 7100.4. 1200.35 of BExAnalyzer.xla
3/10/2011 10:23:44 AM (1) -> PID of Excel process: "2544"
3/10/2011 10:23:44 AM (1) -> EndOfInitConnection i n thread 1
3/10/2011 10:23:44 AM (1) -> RS_PREC_LAUNCH_EXCEL finished
3/10/2011 10:23:44 AM (5) -> Calculation Request 9 11A35ED02654D789871000900000000 received for job '
BIBCAST4L41566ZBZDN2NTGJR0462ZFX'. 11A35ED02654D789871000900000000 received for job '
3/10/2011 10:24:27 AM (0) -> RS_PREC_GET_SERVER_ST ATUS invoked.
3/10/2011 10:24:27 AM (0) -> RS_PREC_GET_SERVER_ST ATUS finished
3/10/2011 10:24:31 AM (5) -> Opening workbook: C:\ WINDOWS\TEMP\BW\Analyzer\Workbooks\SAPBEXPRECQB2VE
A8O8D8FBHYCR4HVB5UI8_0.xls WINDOWS\TEMP\BW\Analyzer\Workbooks\SAPBEXPRECQB2VE
3/10/2011 10:24:52 AM (5) -> Refresh BExAnalyzer.x la!MenuRefreshPrecalc returned with 1.
3/10/2011 10:24:52 AM (5) -> Calculated workbook C :\WINDOWS\TEMP\BW\Analyzer\Workbooks
SAPBEXPRECQB
2VEA8O8D8FBHYCR4HVB5UI8_0.xls saved. :\WINDOWS\TEMP\BW\Analyzer\Workbooks
SAPBEXPRECQB
Thanks in advance
Narendra

Hi Ravikanth,
Thank you very much for the reply
I went into RSPRECADMIN and clicked on 'Display Current Queue'. There we have 3 sections
1) Queue Overview of Open Precalculations
I can see this section is always blank after running IB also
2) Queue Overview of Current Precalculations
In this section I can see an entry after running IB and duration is changing. but some time workbook in this section will never processed but the duration column is changing may be something is happening at this stage.
If the entry is not proccessed in this section and IB SM37 job will never end. I manually cancelled the job from SM50.
Don't why the workbook is taking long time and will never end even though I cancelled the SM37 IB job.
3) Queue Overview of Proccessed Error-Free Precalculations
All the error free workbooks which means all pre-cal server completed workbook calculation and sent to SOST.
I manually ran the workbook for all the 20 employees I can't find any pop-up message (earlier we have pop-up windows appearing because of VB code and when report returns no data and we fixed the pop-up issues)
Can you please help me further to trace the error.
Thank you
Narendra

Cisco ISE with both internal and External RADIUS Server

Hi
I have ISE 1.2 , I configured it as management monitor and PSN and it work fine
I would like to know if I can integrate an external radius server and work with both internal and External RADIUS Server simultanously
So some computer (groupe_A in active directory ) will continu to made radius authentication on the ISE internal radius and other computer (groupe_B in active directory) will made radius authentication on an external radius server
I will like to know if it is possible to configure it and how I can do it ?
Thanks in advance for your help
Regards
Blaise

Cisco ISE can function both as a RADIUS server and as a RADIUS proxy server. When it acts as a proxy server, Cisco ISE receives authentication and accounting requests from the network access server (NAS) and forwards them to the external RADIUS server. Cisco ISE accepts the results of the requests and returns them to the NAS.
Cisco ISE can simultaneously act as a proxy server to multiple external RADIUS servers. You can use the external RADIUS servers that you configure here in RADIUS server sequences. The External RADIUS Server page lists all the external RADIUS servers that you have defined in Cisco ISE. You can use the filter option to search for specific RADIUS servers based on the name or description, or both. In both simple and rule-based authentication policies, you can use the RADIUS server sequences to proxy the requests to a RADIUS server.
The RADIUS server sequence strips the domain name from the RADIUS-Username attribute for RADIUS authentications. This domain stripping is not applicable for EAP authentications, which use the EAP-Identity attribute. The RADIUS proxy server obtains the username from the RADIUS-Username attribute and strips it from the character that you specify when you configure the RADIUS server sequence. For EAP authentications, the RADIUS proxy server obtains the username from the EAP-Identity attribute. EAP authentications that use the RADIUS server sequence will succeed only if the EAP-Identity and RADIUS-Username values are the same.

Compare Server Names in Excel sheet from column1 with column 2 and exact matched server names should be saved in column 3 in same Excel sheet

Hi Guys,
First of all thanks in advance any help much appriciated.
I am new in scripting and excel, i am looking for below solution as my job requires daily work of this kind and i came to know by automating this work lots of time can be saved.
Compare Server Names in Excel sheet from column1 with column 2 and exact matched server names should be saved in column 3 in same Excel sheet.
Looking solutions first using excel i.e.vlookup itself so that it will not require any approval in my job else using powersell ,vbscript.
Once again Thanks for you guys.
/Regards
Nitesh24in

Hi Edward,
Thanks once again
I have only changed excel file path and after that this is saved as below , i am not sure which three lines should be together in one line. Please advise.
$excel = New-Object -ComObject Excel.Application
$Workbook = $excel.Workbooks.Add("F:\NewDocsToReadNitesh26-May2013\Excel\test.xls")
$WorkSheet = $Workbook.Worksheets.Item(1)
$WorkSheet.Activate() | Out-Null
For ($i=1;$i -le $worksheet.UsedRange.Rows.Count;$i++) {
If ($worksheet.cells.item($i,1).value2 -eq $worksheet.cells.item($i,2).value2) {
$worksheet.cells.item($i,3).value2 = $worksheet.cells.item($i,1).value2
}$Workbook.Save()$excel.Quit()[System.Runtime.InteropServices.Marshal]::ReleaseComObject([System.__ComObject]$excel) | Out-Null
Thanks and Regards
Nitesh24in

How to Perform Forced Manual Failover of Availability Group (SQL Server) and WSFC (Windows Server Failover Cluster) with scrpiting

I have a scenario with the three nodes with server 2012 standard, each running an instance of SQL Server 2012 enterprise, participate in a
single Windows Server Failover Cluster (WSFC) that spans two data centers.
If the nodes in the primary data center are unavailable due to data center outage. Then how I can able to access node in the WSFC (Windows Server Failover Cluster) in the secondary disaster recovery data center automatically with some script.
I want to write script that can be able to check primary data center by pinging some IP after every 5 or 10 minutes.
If that IP is unable to respond then script can be able to Perform Forced Manual Failover of Availability Group (SQL Server) and WSFC (Windows Server Failover Cluster)
Can you please guide me for script writing for automatic failover in case of primary datacenter outage?

You are trying to implement manually what should be happening automatically in the cluster. If the primary SQL Server becomes unavailable in the data center, it should fail over to the secondary SQL Server automatically. Is that not working?
You also might want to run this configuration by some SQL experts. I am not a SQL expert, but if you have both hosts in the data center in a cluster, there is no need for replication between those two nodes as they would be accessing
the database from some form of shared storage. Then it looks like you are trying to implement Always On to the DR site. I'm not sure you can mix both types of failover in a single configuration.
FYI, it would make more sense to establish a file share witness in your DR site instead of placing a third node in the data center for Node Majority quorum.
. : | : . : | : . tim

How to Perform Forced Manual Failover of Availability Group (SQL Server) and WSFC (Windows Server Failover Cluster)

I have a scenario with the three nodes with server 2012 standard, each running an instance of SQL Server 2012 enterprise, participate in a
single Windows Server Failover Cluster (WSFC) that spans two data centers.
If the nodes in the primary data center are unavailable due to data center outage. Then how I can able to access node in the WSFC (Windows Server Failover Cluster) in the secondary disaster recovery data center automatically with some script.
I want to write script that can be able to check primary data center by pinging some IP after every 5 or 10 minutes.
If that IP is unable to respond then script can be able to Perform Forced Manual Failover of Availability Group (SQL Server) and WSFC (Windows Server Failover Cluster)
Can you please guide me for script writing for automatic failover in case of primary datacenter outage?

please post you question on failover clusters in the cluster forum. THey will explain how this works and point you at scipts.
You should also look in the Gallery for cluster management scripts.
¯\_(ツ)_/¯

I set up Raid on my Mac Mini Server and lost my Server software. It is not listed in my "purchased" apps. How can I get it w/o having to purchase it? Will my serial

I set up Raid on my Mac Mini Server and lost my Server software. It is not listed in my "purchased" apps. How can I get it w/o having to purchase it? Will my serial # be enough to show it is a mini server and under warrantee be enough to get it back?

If it's not listed in Purchases, check that it's hidden, and if so, unhide it > http://support.apple.com/kb/HT4928 After that, go to Purchases and download OS X Server.
If you can't download it, contact with the Mac App Store support > http://www.apple.com/support/mac/app-store/contact

What is Max MT server and min MT serve

Hi All,
What is Max MT server and Min MT server means in Siebel?
Why we need to use this.?
Please give me some idea on this
Regards
Tusar

Here's an excerpt:
Our basic recommendation is to have 20 tasks per MT Server. (An MT (Multi-Threaded) Server is equivalent to an operating system process.)
Consider the projected number of concurrent users for the application in the design phase of the implementation. Even though there may be a large number of potential users, a smaller number will be logged in at any given time. For purposes of the following discussion, assume that there are 100-200 concurrent users.
There are many variables to consider when tuning an Object Manager. This tuning should be reviewed with Siebel Expert Services as part of the Production Readiness review. Here are some variables to consider.
The number of concurrent users.
The length of time each user spends on the system during a session.
Session timeout.
Use of scripts.
Complexity of the application.
High usage times. (80% of users are online from 11:00 to 3:00)
The settings used for this Siebel Object Manager component are as follows:
Maximum Tasks = 300
Maximum MT Servers = 15
Minimum MT Servers = 5
Maximum Tasks represents the total number of concurrent users. Since the anticipated number of concurrent users is between 100-200 the setting has been set to allow for some extra breathing room. This is important to allow for sessions that do not log out properly and therefore hang around until the session timeout is reached. Session timeout can be set in the Webserver and is usually defaulted to 20 minutes.
Maximum MT Servers is the total number of processes that can be run for this component. It is also used to calculate how many tasks can be run on each process. The calculation is as follows:
Maximum Tasks / Maximum MT Servers = Number of tasks per MT Server
300 / 15 = 20
As mentioned before, our basic recommendation is that the ratio of Maximum Tasks to Maximum MT Servers be 20. An extensively configured or scripted application may require a lower ratio.
Minimum MT Servers is only used when the Siebel Server or the Component is started. This determines how many processes to startup for this component. The only benefit that this provides is that it reduces the initialization time of the process when a new MT Server is needed. In this example, 5 MT Servers were used because 100 users are anticipated. This way the system can handle 100 concurrent users before having to startup a new process.

Replication between Oracle Server and MS SQL Server

Hello,
Does anybody know of a well known or reliable software that can do data replication between Oracle Server and Microsoft SQL server.
I suppose I can write my own version using Heterogenous Services in Oracle but I would like to know if such an automated replication between Oracle and SQL is available commercially.
Thank you.

Viacheslav Ostapenko wrote:
Sorry, Aman,
I couldn't find any info about replication to MS SQL. Is it possible at all? Could you provide link where we can read about this? It could be very interesting.Sorry Viacheslav, even I couldn't find anything for the same. I am not sure that it can be done or not, I haven't heard anyone in my contact doing so. The only place where I have seen Streams being used around me is within Oracle db only. May be someone else can help if he/she has done it.
Aman....

Install both Sun Application server and Jboss application server- Can I?

Dear all,
I am programmer and want to test for something.
Is it possible to install sun application server and jboss application server in the same computer (Windows XP Professional)?
Is there any special attention I need to take?

I am programmer and want to test for something.Allowed.
Is it possible to install sun application server and jboss application server in the same computer (Windows XP Professional)?Why do you think it may not be possible ?
Is there any special attention I need to take?just the way the URL is populated.

Mobile repository server and mobile development server

Hi,
We are implementing Mobile applications,. Can we install Mobile repository server and mobile development server in same server?
Or do we have two sepearate servers for both?
What are thye prerequisites for to install this two ?
Any idea.
Thanks
Lisa

Firstly ensure you have correct authorisation. Refer to SAP Note 1037574.
It should be found here...
http://service.sap.com
> SAP Support Portal
> Click on the tab "Downloads"
> Select the drop down arrow called "Download"
> From the list select the dropdown arrow "Installations and
Upgrades"
> Click on "Entry by Application Group"
> Now in the main screen click on "SAP Application Components"
> Select "SAP CRM" from the drop down list.
> Now click on "SAP CRM 2007"
> Click on "Installation and Upgrade"
Rgds, Gervase

RE:difference between application server and web application server

hi,
i am a fresher to SAP.please tell me the difference between application server and web application server so that my doubt will be clarified.

Hi,
the SAP Web Application Server is the reliable, open standard-based application server from SAP. It supports both J2EE and ABAP, and serves as the underlying infrastructure for all new and upcoming SAP solutions, like SAP R/3 Enterprise, SAP Portal, SAP Exchange Infrastructure, and all other SAP components.
The SAP Web Application Server is not a new product, it is the natural evolution of proven SAP application server technology formerly known as SAP Basis. It provides the platform to develop, execute, and operate Web applications and Web services as well as traditional SAP GUI based applications
if it helpful rewards points are appreciated

Can I sync my iPhone calendar with exchange server AND ical on my mac ?

I have been happily using my iPhone synced with my Macbook over usb via iTunes.
I have contacts and iCal syncing. I have a number of 'calendars' set up in iCal which allow me to view separate aspects of home and work but they all exist within iCal. iPhone just treats these as colour coded appointments (different colour for each ical calendar)
I really like this set up.
However, I just changed jobs to a firm where they have a hosted outlook exchange set up and I need to use the exchange calendar for work appointments and showing my availability.
I have managed to setup my iPhone to work with the Exchange server for email as well as in apple Mail on my mac. This has all worked fine. However, I hesitated when iPhone asked if i wanted to sync my contacts and calendar. I said no as I was unsure if my private calendar/contacts would be uploaded to the public work area.
In fact it seems that this is the least of my worries:
As I have read on apple support for iPhone:
"Note that after configuring an Exchange ActiveSync account, all existing contact and calendar information on the iPhone or iPod touch is overwritten. Additionally, iTunes no longer syncs contacts and calendars with your desktop computer. You can still sync your iPhone or iPod touch wirelessly with MobileMe services."
So I am really pleased that I didn't let it sync those and wipe out my personal data if that is really true.
But now I am unsure how best to enable myself to view and update the work calendar on exchange.
Also it would be nice to see work contacts on my iPhone.
Contacts
- although i have said no to sync contacts with Exchange in fact it looks like I can get contacts ok - when i send email from the Exchange account on the phone , it searches Exchange contacts on the server as i type in the TO box.
- also in Contacts on the iPhone I have a new group that has been created with the name of my Exchange account. The group appears to be blank when you go into it on the phone, but you can type in the search box and get contact details from the server just fine.
This seems workable for now for my purposes, although updating contacts is not going to be possible that way.
I'd like more info on that if poss but more importantly..
Calendar
- Unlike Contacts, no Calendar has been auto created for Exchange
- Unlike contacts, I can't see how I can view or search or create an appointment in my Exchange calendar on the iPhone
What is the best solution to this problem - I presume lots of people face the same dilemma. My initial research suggests that there are multiple ways round this but all of them look like workarounds with various disavantages.
Questions are
- Can't I just set up Exchange as one of my calendars in ical?
- Is it really true that I have to choose between syncing Exchange with work server OR syncing iCal with personal Macbook?
- What is the best work around for this?
At the moment I am seriously considering getting a separate iPhone for work and have that sync with Exchange fully although that seems a bit drastic and does not solve the problem of seeing work and home appointments on the same calendar.

Can't I just set up Exchange as one of my calendars in ical?
Only if you're running Snow Leopard and your employer will allow access (different than iPhone/mobile device access, so most likely not), but not needed - keep reading.
Is it really true that I have to choose between syncing Exchange with work server OR syncing iCal with personal Macbook?
No. It was true, but with the v3.0 software that changed - you can now sync your Exchange contacts and calendar over the air, and your Address Book and iCal via iTunes over the docking cable.
What is the best work around for this?
None needed. When you set up the exchange account, and choose to turn on syncing of contacts and calendars, you will be prompted to remove all other data, or keep it on the iPhone. Choose the keep option. Note that in that case, your personal data will not be uploaded to the Exchange server - the iPhone keeps them separate (although you can choose to view them in a merged fashion).
I have this set up on my phone (Exchange calendar along side personal and other calendars from iCal). Same for contacts. Works great.

How to start VPN Server with PPTP + How to backup Addressbook Server

Hey people,
I currently have Lion Server running on my mac mini server, it was upgraded to Lion (server) from Snow Leopard server.
Now i have 2 issues i'd like to address and ask your help for.
1. VPN Server on Lion Server.
I have had the VPN server running on Snow Leopard server without a problem, however, since my Lion upgrade it just isn't working with PPTP anymore.
I did read alot of discussions here and also read that you can configure it through the terminal using the serveradmin tool.
I have followed the instructions to get PPTP enabled, but it just isnt listening on the correct port, i don't see anything running nor can i connect from my Lion client to the server (i get server not responding).
Does anyone experiece the same problem? or know how to solve this?
2. Addressbook Server on Lion Server.
I have a few network users on my system, they use the Addressbook server through their iphone/ipad.
I don't know how to backup their contacts they added in the server, is there a way to backup the data?
I have already tried to export the user using the Workgroup Manager, but when i look in the file, i don't see any additional info other then the user settings.
I have been thinking of reinstalling the server to a complete fresh Lion only installation instead of the current upgraded Lion from Snow Leopard, that's why i need to backup the info.
Time Machine backups of an upgraded Snow Leopard Server to Lion Server won't work on a fresh Lion Server installation, i have always had the problem that it can't read the data for some reason.
Anyone know a solution for these 2 issues?

Hi,
In your base module MANIFEST.MF include Rest module in ATG-Required.
It like,
ATG-Required: DCS B2CCommerce WebUI Rest
Hope it will work for you.
Regrads
Kumaresh Babu A

Outlook clients with SL server and ICAL/Addressbook server

Similar Messages

Maybe you are looking for