Outlook connectivity and mail flow issue on Exchange 2010 3 node DAG

Hi,
I have 3 node DAG, 2 (NODE A, NODE B) in Production site and 1(NODE C) in DR site. but just 1 AD Site.
when I have the active databases on NODE B, everything works fine. no issues to report.
but when I move the databases on NODE A, outlook gets connected with trying to update folders. Furhter, emails will be in outbox and no new emails will be delivered to the users. After an hour or so emails get delivered from outbox.
Even after supplying the credentials OWA doesnt login. just tries to load.
No issues when I move the servcies on NODE C.
ANy idea what could be the issue?
Thanks,
Vinod

Hi Vinod,
According to your description, there is one-hour delay in the process of sending and receiving emails.
To check if it’s caused by Autodiscover service, we can use the tool Test Email AutoConfiguration：
1. Hold CTRL and Click the outlook Icon in the system tray and select “Test Email Auto Configuration”.
2. Deselect the “Use Guessmart” and “Secure Guessmart Authentication” and click Test.
3. Check SCP value returned
For more information, please refer to the following article:
http://blogs.technet.com/b/exchdxb/archive/2012/05/10/troublshooting-autodiscover-exchange-2007-2010.aspx
http://support.microsoft.com/kb/2663435
http://support.microsoft.com/kb/262052
If connectivity is well, the issue is mostly likely caused by the Exchange mail submission service.
We can check if the service work properly. And the issue may be not related to the Hardware Load Balancer. Because the emails are stuck in the client side.
Thanks,
Angela Shi
TechNet Community Support

Similar Messages

Mail Flow Issue In Exchange Server 2010

Hello,
I have an on-premises environment where I have an exchange 2010 hub and edge server. I have 4 domains. All my emails are routed through edge server to the internet. When I send an email from my primary domain to a particular remote domain the email gets
delivered. When I send an email from any other secondary domain the email does not get delivered at the remote end. The remote domain is on office 365.
I tried sending the email with the delivery receipt to the remote domain from my secondary domains and I always get the delivery receipt stating that the email has been delivered however the remote domain admin says that the email was never received by him.
We have also did the message trace on Office 365 remote domain but there was no trace of that email.
Please help and let me know how can I proceed futher this is hampering the productivity in my organization.

Thanks for your reply.
All my domains are added to office 365. My MX is pointed to office 365 but I send all the emails through my edge server. The remote domain receives emails on office 365.
We use DNS to send out emails

Does Outlook "Connection Status" Show Rollup Updates on Exchange 2010 SP3

Hi all,
I've looked for this answer everywhere, and can't seem to find it. When you CTRL right-click on the Outlook taskbar icon, and select "Connection Status", one of the pieces of information displayed is the Version number of the connected Exchange
server.
Does this build number include installed rollup updates, or does it show only the installed Service Pack. For example, if it's an Exchange 2010 SP3 server with RU6 installed, will I see 14.3.195.1
or just 14.3.123.4 (the SP3 build number)? I'm trying to use this information to troubleshoot
client issues, and it'd be helpful to quickly see if certain updates are installed on the Exchange server or not.
Thanks!

Hi,
Just as what mentioned above, connection status displays the Exchange version number.
Start Outlook and connect to the Exchange server if this isn’t done automatically already.
Hold CTRL while clicking on the Outlook icon in the Notification Area
(located in the right bottom area near the time; expand the Notification Area first if the Outlook icon does not show).
From the context menu that pops-up choose: Connection Status…
Scroll the horizontal scrollbar to the right to see the Version column.
(if the dialog is empty, then you are not connected to Exchange)
Here you’ll see a version number.
Best regards,
Belinda Ma
TechNet Community Support

Weird issue with Exchange 2010 Room Mailboxes - allows multiple booking of the created meeting rooms

Hi,
we are facing weird issue with Exchange 2010 Room Mailboxes
it allows multiple booking of the created meeting rooms.Sometime we are not getting acceptance or declined mail but and we could see our meetings has been booked at slot.
for e.g.
User A booked room1 with weekly recurrence for time 4pm to 5pm., and User B made his booking other day,without realizing that user A meeting is exists.
Neither of user A nor user B got declined/rejected emails.
please sahre guidelines if anyone known to this issue.
Note - Allow Conflict booking is disabled already :) but still have issue
Thanks,
NPratik

Hi,
Just add more in this issue, following testing is done.
referring results and conclusion, you will get better view on issue
====================
Test Case - 1
User OnCloud/O365 - Pratik Nimbalkar
Email ID - [email protected]
( same as UPN)
Room Booking Scenario - Book Room for 6.30pm to 7.30pm slot
Results - Accepted
Room Booking Scenario for same slot- ReBook Room for 6.30pm to 7.30pm slot
Results - Declined
Conclusion = working fine
==================
Test Case - 2
User OnCloud/O365 - Testsm
Email ID - [email protected]
( different from UPN)
Room Booking Scenario - Rebook Room for 6.30pm to 7.30pm slot
Results - No Response from Room Mailbox neither Accepted nor Declined
But we can see as booked as "Tentative"
Room Booking Scenario for same slot- Rebook Room for 6.30pm to 7.30pm slot
Results -No Response from Room Mailbox neither Accepted nor Declined
But we can see as booked as "Tentative"
=========================
Conclusion = There is issue with booking room and not getting response while user is
@abc.my id.
======================
Note = for all other on premise users those are having @abc.co.in
and @abc.my it is working fine. Users are getting respective correct reply from room mailboxes.
This issue seems with only on cloud
@abc.my users

Exchange 2010 SP3 DAG Flip Flop File Share Witness Issue

Hi All,
We are facing one strange issue with Exchange 2010 SP3.
Our environment is as below
a single DAG spanned accross 2 AD sites with 6 MBX server.
Each site have 3 MBx server.
File Share Witness is on Hub server in primary site.
Note: The DAG IP is from Primary DC VLAN and which cant be streched accross DC due to network restrictions/limitations.
It was working fine till date.
But, yesterday onwards we are facing issue.
All DB dismounted and DAG name disappear from EMC and while doing refresh its giving error as below
Exception type: Microsoft.Exchange.Data.DataValidationException
Exception message: Could not convert property WitnessServer to type UncFileSharePath. Error while converting string 'vesthub700.mydomain.com\DAG1.mydomain.com' to result type Microsoft.Exchange.Data.UncFileSharePath: "vesthub700.mydomain.com\DAG1.mydomain.com"
is not an acceptable path. You must use an absolute, local, long file path, that doesn't contain '~', or a UNC path. Parameter name: path
We are not able to execute any cmdlets related to databaseavailabilitygroup from EMS and its giving same error.
Failover Cluster DAG resource is Flip/Flip continuously.
Its only become stable after reboot of the hub server holding FSW and the 1st mailbox server.(Cluster Owner)
We are even not able to move cluster group to different server.
Performed ExBPA no such issues found which related to DAG.
Performed clsuter validation.
Only generic cluster events in Mailbox servers.
Observation:
Its only become stabe if we remove the msExchFileShareWitness Value for DAG1 using ADSIEdit.
And the problem recurs if we set it back again.
Any help or suggestion is appreciated.
Thanks,
soumen
Soumen Ghosh

Hi Belinda,
Thanks! I have checked the Mailbox Server Application Log and found few 2155 Event Id generated at the time of the issue occured.
Process Microsoft.Exchange.ServiceHost.exe () (PID=9312). Configuration object CN=DAG1,CN=Database Availability Groups,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=xxxxxx,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=mydomain,DC=com
read from DCTDK35.mydomain.com failed validation. DataValidationException will be thrown. Set event logging level for Validation category to Expert to get additional events about each failure.
One update is that the DAG is stable now after we set an alternate FSW last night.
Regarding the 2nd IP assignment for DAG for the 2nd subnet, we have gone through technet and other sites which refering to add the same from EMC or EMS.
Is it sufficinet to simply adding the 2nd IP to DAG from EMC or EMS? Or do we need to take any other special consideration.
Also, adding another IP it will create one more IP address resource to Failover Cluster, but I belive at a time both the IP wont be online. Do we need to keep it offline manually or its automatically taken care by Exchange.
Please suggest.
Also, regarding executing the CollectOverMetrics.ps1 we are following
http://www.msexchange.org/articles-tutorials/exchange-server-2010/monitoring-operations/monitor-dag-database-failover.html
but failed to execute. Can you suggest the correct parameter.
Thanks,
Soumen
Soumen Ghosh

Exchange Server 2003/2010 Coexistence Mail-flow Issues

I've installed Exchange 2010 in a 2003 coexistence scenario.
2010 was deployed with CAS,HUB, and Mailbox roles.
The installation went through smoothly, and the default RGC was created.
On the 2010 Server, when I create a new users with mailbox, that user is no able to send or receive mail from anywhere.
2010 user to 2010 user does not work
2003 user to 2010 user does not work
Mail delivery between 2003 users works fine.
The RGC message queue in ESM 2003 shows that the messages are queued and keep retrying.
I have deleted the RGC twice and created new ones, I have un-installed the HUB and CAS roles and re-installed them, and I have also re-run setup /preparead and setup /preparelegacyexchangepermissions
I'm not able to make any sense of the message tracking on the 2010 side. It just shows a bunch of entries:
EventID: NOTIFYMAPI
Source: STOREDRIV
When I use the best practices analyzer to test mailflow to a 2010 user from the outside, the test comes back with a pass even though the message itself isn't delivered to the specified mailbox.
There is no smart host defined on the default SMTP virtual server on 2003.
There is no SMTP Send Connector for External or Internal mail configured on 2003 besides the 2010 RGC
Any ideas?
Here is the mail flow analyzer result:
Testing inbound SMTP mail flow for domain '[email protected]'.
     Inbound SMTP mail flow was verified successfully.
     Additional Details
Elapsed Time: 3437 ms.
     Test Steps
     Attempting to retrieve DNS MX records for domain 'test.com'.
     One or more MX records were successfully retrieved from DNS.
     Additional Details
MX Records Host mail.test.com, Preference 0
, Host test.com, Preference 10
Elapsed Time: 110 ms.
     Testing Mail Exchanger mail.test.com.
     This Mail Exchanger was tested successfully.
     Additional Details
     Test Steps
     Attempting to resolve the host name mail.test.com in DNS.
     The host name resolved successfully.
     Additional Details
     Testing TCP port 25 on host mail.test.com to ensure it's listening and open.
     The port was opened successfully.
     Additional Details
Banner received: 220 EX2K3w2K3.test.net Microsoft ESMTP MAIL Service, Version: 6.0.3790.3959 ready at Wed, 5 Feb 2014 14:40:44 -0500
Elapsed Time: 368 ms.
     Analyzing SMTP Capabilities for server mail.test.com:25
     SMTP Capabilities were analyzed successfuly.
     Additional Details
     Attempting to send a test email message to [email protected] using MX mail.test.com.
     The test email message was delivered successfully.
     Additional Details
Elapsed Time: 621 ms.
     Testing the MX mail.test.com for open relay by trying to relay to user [email protected].
     The Open Relay test passed. This MX isn't an open relay.
     Additional Details
     Testing Mail Exchanger test.com.
     This Mail Exchanger was tested successfully.
     Additional Details
     Test Steps
     Attempting to resolve the host name test.com in DNS.
     The host name resolved successfully.
     Additional Details
     Testing TCP port 25 on host test.com to ensure it's listening and open.
     The port was opened successfully.
     Additional Details
     Analyzing SMTP Capabilities for server test.com:25
     SMTP Capabilities were analyzed successfuly.
     Additional Details
     Attempting to send a test email message to [email protected] using MX test.com.
     The test email message was delivered successfully.
     Additional Details
     Testing the MX test.com for open relay by trying to relay to user [email protected].
     The Open Relay test passed. This MX isn't an open relay.
     Additional Details

No duplicate security groups. I did notice Exchange 2010 is not in the Exchange Domain Servers group, but 2k3 is. Not sure if that matters.
In the Application event log I'm seeing this error a lot.
Log Name: Application
Source: MSExchangeMailSubmission
Date: 05/02/2014 3:02:31 PM
Event ID: 1009
Task Category: MSExchangeMailSubmission
Level: Error
Keywords: Classic
User: N/A
Computer: ex2010w2k8.test.net
Description:
The Microsoft Exchange Mail Submission service is currently unable to contact any Hub Transport servers in the local Active Directory site. The servers may be too busy to accept new connections at this time.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="MSExchangeMailSubmission" />
<EventID Qualifiers="49156">1009</EventID>
<Level>2</Level>
<Task>1</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2014-02-05T20:02:31.000000000Z" />
<EventRecordID>6530</EventRecordID>
<Channel>Application</Channel>
<Computer>ex2010w2k8.test.net</Computer>
<Security />
</System>
<EventData>
<Data>HubTransport</Data>
</EventData>
</Event>
As long as you cannot send email between ex2010 users this has nothing to do with connectors/smtp config..
I had the same issue one year ago and solved adding both sevrers to old/new exchange sevrers security groups.
Looks like for some missing security entry (not sure why) mailbox is unable to conact HUB  (MSExchangeMailSubmission) I expect you seing items stuck in draft for owa (outbok for outlook)
I saw in some blogs similar cases solved by setting static DNS servers for HUB severs config.
Yes that is similar to what I'm experiencing.
When using the Outlook client with a 2010 mailbox the mail leaves the outbox fine. When using OWA new messages just get saved as drafts when I try to send them.
I will try your suggestions. I see two groups. Exchange Domain Servers, and Exchange Enterprise Servers of which Exchange Domain Servers is a member.

Mail flow problem between Exchange 2013 and 2010

Hi,
we have 4 exchange 2010 servers, 2 mailbox and 2 hubcas. we are migration to 4 exchange 2013 servers, 2 mailbox and 2 hubcas.
exchange 2013 user can send and receive emails from/to internet without problems, but when i try to send email to internal users located to 2010 server i have no success.
i also can receive from exchange 2010, so the problem is only i cannot sent emails to exchange 2010 users.
is this a problem with receive connector of exchange 2010 or something else ???

one more thing, when i open exchange queue i got this error:
451 5.7.3 cannot achieve exchange server authentication. attempted failover to another host but that did not succeed. either there are no alternate hosts, or delivery fail
For this error refer to the following article:
http://support.microsoft.com/kb/979175
Thanks, MikeV MCSE 2012

Problems with Outlook 2013 and Windows 8.1 with Exchange 2013

Hello Guys,
I just got started with testing Exchange 2013. My lab consists of 2 Exchange 2013 Servers, the Installation Media is the Exchange 2013 SP1 from MSDN, Server 2012 R2 and 2 Windows 8.1 Clients with Office 2013 SP 1 with all updates installed. I have configured
some mailboxes in Exchange and I want now to configure Outlook. So at the initial startup Outlook displays the correct Name and Mail Address. When I click next I make it to Logging on the mail server and then I am getting the Error : The connection to Microsoft
Exchange is unavailable. Your Network adapter does not have a default Gateway. All servers are in the network 192.168.5.0 /24. Any suggestions how can I fix this problem ?
Thank you

Hi there and thanks for Posting!
You can correct the issue by disabling outlook connection optimism.
Full details can be found from link below.
http://blogs.technet.com/b/rmilne/archive/2014/03/27/outlook-unable-to-connect-to-exchange-_1320_default-gateway-not-found.aspx
Happy Testing :)
Farhad

TS4136 Apple Mail ActiveSync issue during Exchange 2007 to Exchange 2010 migration

When customer configures the ActiveSync account on Apple Mail (using Exchange Server 2010 CAS array name) for the user whose mailbox is on Exchange Server 2007, they are not able to get any mail and account displays offline. It shows the mailbox empty as well, even though mailbox has the email items in it.
But when same account is configured using ActiveSync (using Exchange 2007 CAS Server name) it works fine.
ActiveSync & Web Services URLs for Exchange 2010 and Exchange 2007 are given as below:
S#
Virtual Directory
URL
Exchange Server 2010
Exchange Server 2007
1
Web Services Virtual Directory
Internal URL
https://email2.domain.ae/EWS/Exchange.asmx
https://email.domain.ae/EWS/Exchange.asmx
2
Web Services Virtual Directory
External URL
https://email2.domain.ae/EWS/Exchange.asmx
https://email.domain.ae/EWS/Exchange.asmx
3
ActiveSync Virtual Directory
Internal URL
https://email2.domain.ae/Microsoft-Server-ActiveSync
https://email.domain.ae/Microsoft-Server-ActiveSync
4
ActiveSync Virtual Directory
External URL
https://email2.domain.ae/Microsoft-Server-ActiveSync
https://email.domain.ae/Microsoft-Server-ActiveSync
Following error is logged on Console on Mac when this issue happens:
30/10/12 3:27:28.398 AM
Mail
*** Assertion failure in -[EWSConnection _fetchRootFolderId:], /SourceCache/Message/Message-1278/MessageStores.subproj/EWSConnection.m:202
EWS fetchRootFolderId: expected one folder in response, received: 0
0   Message                             0x00007fff8cdeeef8 -[MFAssertionHandler _handleFailureWithPreamble:description:arguments:] + 116
1   Message                             0x00007fff8cdef08e -[MFAssertionHandler handleFailureInMethod:object:file:lineNumber:description:] + 185
2   Message                             0x00007fff8cd1c8db -[EWSConnection _fetchRootFolderId:] + 768
3   Message                             0x00007fff8cd1deba -[EWSConnection _connectAndAuthenticateUsingAccount:] + 650
4   Message                             0x00007fff8cd1c42d -[EWSConnection connectUsingAccount:] + 462
5   Message                             0x00007fff8cd1996a -[EWSAccount authenticatedConnection] + 437
6   Message                             0x00007fff8cd2c00e -[EWSGateway connection] + 55
7   Message                             0x00007fff8cd2dddf -[EWSGateway sendMessage:forRequest:] + 43
8   Message                             0x00007fff8cd3e54c -[EWSRequestOperation executeOperation] + 108
9   Message                             0x00007fff8ce0f97f -[MonitoredOperation main] + 228
10 Foundation                          0x00007fff94aae6b4 -[__NSOperationInternal start] + 705
11 Foundation                          0x00007fff94ac1912 ____NSOQSchedule_block_invoke_2 + 124
12 libdispatch.dylib                   0x00007fff8adc8a86 _dispatch_call_block_and_release + 18
13 libdispatch.dylib                   0x00007fff8adc9965 _dispatch_worker_thread2 + 255
14 libsystem_c.dylib                   0x00007fff8a32c3da _pthread_wqthread + 316
15 libsystem_c.dylib                   0x00007fff8a32db85 start_wqthread + 13

Hi Akebono,
Let's check a few things in your server:
1. From the Organization Configuration - Client Access - Exchange Activesync policies - Default: Verify if the option "Allow non-provisionable devices" is ON.
2. From Server Configuration - pointing <YourExchange2010> - Certificates: Verify if your SSL certificate is assigned to IIS. (You should also be able to see this certificate from OWA https session)
3. The problem may also reside in iPhone outdated software, try to test activesync connection from iPhone with the latest OS version.
4. Take a look at logs in C:\inetpub\logs\LogFiles\W3SVC1\ of Exchange 2010, those might give some more details on connectivity problems.
5. If you still experience such problems - post the ExRCA error report here.
▲ Vote if Helpful / Mark if Answer
MCSE: Messaging 2013 Charter / Private Cloud / Server Infrastructure
MaximumExchange.ru

Outlook Client Issues following Exchange 2010 Rollup 8

Update Rollup 8 For Exchange 2010 SP3 (KB2986475) was applied to our Exchange server last night.
All appears to be fine, but users are having all kind of trouble using the Outlook Client to connect to their mailboxes.
Randomly they can't view certain folders (Inbox/Sent Items). Can no longer save to their Calendars. Errors relating to permissions and Outlook notifications?!?!?!?!
This is ONLY when using the Outlook Client - webmail works fine.
There are also no issues when running Outlook in safe mode.
Any advice would be very much appreciated.
Thanks
David

The following has been posted onto the Exchange team site:
http://blogs.technet.com/b/exchange/archive/2014/12/09/exchange-releases-december-2014.aspx
Update 12/10/2014:
An issue has been identified in the Exchange Server 2010 SP3 Update Rollup 8. The update has been recalled and is no longer available on the download center pending a new RU8 release. Customers should not proceed with deployments of this update until the
new RU8 version is made available. Customers who have already started deployment of RU8 should rollback this update.
The issue impacts the ability of Outlook to connect to Exchange, thus we are taking the action to recall the RU8 to resolve this problem. We will deliver a revised RU8 package as soon as the issue can be isolated, corrected, and validated. We will publish
further updates to this blog post regarding RU8.
This issue only impacts the Exchange Server 2010 SP3 RU8 update, the other updates remain valid and customers can continue with deployment of these packages.
Cheers,
Rhoderick
Microsoft Senior Exchange PFE
Blog:
http://blogs.technet.com/rmilne
Twitter:   LinkedIn:
  Facebook:
  XING:
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

Outlook anywhere issue for exchange 2010 users

Hi Guys really hoping some one can help me out here.
I have just introduced 2 new exchange 2013 servers into our existing exchange 2010 environment. 1 CAS server and 1 mailbox server.
The issue i'm having is that any users that are on exchange 2010 mailbox servers can't connect to their profiles in outlook via the exchange 2013 cas box. OWA works fine and users that are on exchange 2013 mailboxes also work fine.
Authentication is set to on exchange 2013 and 2010 cas boxes to
Exchange 2013 cas
ExternalClientAuthenticationMethod : Ntlm
InternalClientAuthenticationMethod : Ntlm
IISAuthenticationMethods           : {Basic, Ntlm}
Exchange 2010 cas
ExternalClientAuthenticationMethod : Basic
InternalClientAuthenticationMethod : Ntlm
IISAuthenticationMethods           : {Basic, Ntlm}
I was also wondering should I have a reg key on my exchange cas box of HKEY_LOCAL_MACHINE\Software\Microsoft\Rpc\RpcProxy\validports_autoconfigure_exchange ???

Thanks for the reply i have changed it to the following
Exchange 2013 cas
ExternalClientAuthenticationMethod : Basic
InternalClientAuthenticationMethod : Ntlm
IISAuthenticationMethods           : {Basic, Ntlm}
Exchange 2010 cas
ExternalClientAuthenticationMethod : Basic
InternalClientAuthenticationMethod : Ntlm
IISAuthenticationMethods           : {Basic, Ntlm}
and reset iis but still no luck authenticating with outlook on existing profiles or a new profile.

Mail is Slow between Exchange 2010 and 2013 During Co-Existance Transition

Hello,
I recently migrated from a single Exchange 2003 server to a single Exchange 2010 server
I am now trying to Migrate from Exchange 2010 to Exchange 2013.
I have a test user on Exchange 2013, and Internet Mail works fine and quickly both inbound and outbound.
However, when I try and send between a 2010 user to my 2013 user, delivery takes around 10 minutes.
On the 2013 server I see health check messages, and my 2010 user's message stuck in retry status. The messages eventually clear and the mail is delivered. Any ideas what is causing this delay?
In terms of connectors I have all the defaults. And I created 1 for internal relays from devices. Which works fine.
I have two Exchange 2013 servers configured in a DAG, but I don't have a load balance in place as of yet. So only server 1 is being accessed as the CAS.
Thanks

Hi,
According to your description, the mail flow is slow only between Exchange 2010 and Exchange 2013 server. If I misunderstand your meaning, please feel free to let me know.
If yes, I’d like to confirm if there are multiple NICs on your Exchange servers. And you can refer to the following thread:
http://social.technet.microsoft.com/Forums/exchange/en-US/66f0629f-21fb-444b-b3f1-99ed8a4f52b2/slow-mail-flow?forum=exchangesvrsecuremessaging
We have ONLY 1 network adapter, but if we select "All network adapters" instead of Hyper-V, we will get delays.
Thanks,
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Angela Shi
TechNet Community Support

Get User Names and Mail Ids present in Exchange Server

Hello All,
Can we get all the names and mail ids present in the exchange Server global address book?
I tried one example but it is giving error.
Exception in thread "main" javax.naming.CommunicationException: [LDAP: error
code 2 - Protocol Error]; remaining name 's=satheesh'
Code is given below:
Hashtable env = new Hashtable(11);
env.put(Context.INITIAL_CONTEXT_FACTORY, "com.sun.jndi.ldap.LdapCtxFactory");
env.put(Context.PROVIDER_URL, "ldap://mailserver:389");
DirContext ctx = new InitialDirContext(env);
Attributes answer = ctx.getAttributes("s=satheesh");
Any example code to get user names and mail ids will be helpful.
Thanks in advance.
Regards,
Satheesh A
[email protected]

Hi Satheesh,
I am new to LDAP. I am facing the exact same problem as you mentioned. Did you solve your problem?
Thanks for any help you can provide.
Hello All,
Can we get all the names and mail ids present in the
exchange Server global address book?
I tried one example but it is giving error.
Exception in thread "main"
read "main" javax.naming.CommunicationException:
[LDAP: error
code 2 - Protocol Error]; remaining name
aining name 's=satheesh'
Code is given below:
Hashtable env = new Hashtable(11);
env.put(Context.INITIAL_CONTEXT_FACTORY,
"com.sun.jndi.ldap.LdapCtxFactory");
env.put(Context.PROVIDER_URL,
"ldap://mailserver:389");
DirContext ctx = new InitialDirContext(env);
Attributes answer = ctx.getAttributes("s=satheesh");
Any example code to get user names and mail ids will
be helpful.
Thanks in advance.
Regards,
Satheesh A
[email protected]

How to sync Outlook 2007 and Mail

I plan on dual booting vista with outlook 2007, and mac os x 10.6. Is there a program that will sync the mail accounts, and has to be able to sync my earthlink email account? I know you can leave the email on the server, but then whenever I switch from vista to mac I can't tell what messages I have and haven't read, and the sent mail doesn't sync. I have tried mobileme, but then I can't send from my earthlink account. Earthlink does not support IMAP accounts. Any help would be greatly appreciated.

I've never heard of anything that would do this and I've never seen a feature like this even requested. If Erathlink does not support IMAP the best you can do is just what you are doing already - set POP options to leave mail on server after retrieval.
You might also consider getting an IMAP email account. Gmail and AIM are free and both offer imap.

Connection and video chat issues

up until about two months ago, iChat was working just fine. some days it will connect, but for the most part i am constantly disconnected. when i get a connection and i try to video chat, the video chat never works. NEVER. i've tried everything i know on my own, and i'm at my wits end. please help.

Hi,
A routing device will commonly have a set of defaults ports open when you take it out of the box.
Your Internet connection is divided into 65535 ports (think of it more like TV channels) The first 1024 are normally the ones open.
Changing the iChat Login port to 443 moves it below this Threshold.
iChat uses port 5190 on the UDP Protocol (the Login is using the TCP Protocol) for File Sending and cannot be changed.
To do A/V chats you needs port 5678 and then a group, 16393-16402.
Your routing device should be accessible using a web browser. (your type the IP it has in to the URL space like you would apple.com).
Most modern devices have a method of opening the ports called UPnP (universal Plug and Play) which is a Enable/Disable setting.
It allows the apps on computers to tell the routing device which ports to open.
Not all devices have UPnP so you may have to use another method. However either Port Forwarding of Port Triggering allow for the random ports used in Screen Sharing in iChat.
If you are not sure how to proceed tell us what Make and Model your Routing device is.
7:26 PM Thursday; September 23, 2010
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

Outlook connectivity and mail flow issue on Exchange 2010 3 node DAG

Similar Messages

Maybe you are looking for