Outlook Connector Missing/Wrong Time Appts

I'm trying really hard to make Outlook Connector work for our organization with no success. Here are my issues ... hopefully someone else has come across them and found solutions:
1) Some appointments aren't imported into Outlook.
2) Those that are appear an hour earlier than the ones in Oracle.
3) I'm not notified when a new appointment comes in (no ability to accept, reject, or make tentative.
TIA!!
Rick

I had the problem of Outlook appointments showing an hour earlier than they were on the calendar server. I just fouind that by checking the automatically adjust for daylight savings time box this problem was corrected. Go to Start - Control Panel - Date and Time - Time Zone tab - check box = Automatically adjust clock for daylight savings changes.
I just thought I was going nuts...

Similar Messages

Install error for Corporate time Outlook Connector

I have tried installing the outlook connector to Corporate Time but it fails. I have attached the install log. While installing outlook there was no Corporate or Workgroup option. Any Ideas?
Start setup
Install time: 9-29-2002 21:39:48
Searching for MS Outlook installation : OK
Check install package :
Version :
Install date : 200207301714
Enter CheckRequirements.
Running : Win 2000
Exit CheckRequirements
Check admin rights : OK
Enter GetInstallMode
Silent install : FALSE
Exit GetInstallMode
Loading install dll : OK
Check if OL is running
Check OL running exit
Enter CheckOutlookVersion
Outlook version : 9.0
Get Outlook service option : 0
You have installed Microsoft Outlook with an unsupported option.
Rerun the Microsoft Outlook Setup and in Service Support page, choose Corporate or Workgroup option.
Setup cannot continue.
Exit CheckOutlookVersion

To switch your Outlook client to Corporate/Workgroup mode, go to Tools -> Options.., select the "Mail Services" tab, then press the "Reconfigure Mail Support" button. You should then be presented with a wizard that will take you through the process. You may have to have the Outlook install media handy. I'm not sure. Once Outlook is in Corporate/Workgroup mode, try installing the Outlook Connector again.

Outlook iCal Challenged: notifications at wrong time on .mac

When my virtual assistant sends a notification from her pc using Outlook, they import cleanly into iCal. No prob.
When I sync to .mac those notifications appear at the wrong time. Or not at all.
Any clues around this?

Not sure if it will help you, but I figured out my problem. The person with whom I was exchanging calendar entries was also "sharing" a calendar with me through iCloud. She was receiving the calendar entries that I invited her to directly from iCloud -- as opposed to from my email address. Her computer, a PC, was incorrectly processing these calendar entries. To fix this, I just ended the "shared" calendar. Now, when I add her as an invitee to calendar entries, she receives the invite from my email address--as opposed to from iCloud. The problem is resolved. Good luck.

Outlook 2013 calendar displays wrong time on iPhone calendar

I would like to start by saying this is definitely NOT a time zone issue. I have researched the internet and apple and have not been able to find a solution as of yet. This is also not restricted to my phone. We have our work calendar in Outlook 2013. When it syncs to my iPhone 5c and my boss' iPhone 4s it displays the time of the event exactly 7 hours earlier. I have checked the Outlook time zone and the iPhone time zone (in both places, general and the mail/contacts/calendar settings). They are all displayed in the current time zone. I have selected and deselected the auto setting for the time zone as well. Nothing has worked! I'm wondering if it has something to do with an update. It was working just fine for years and now all of a sudden displays the wrong time. PLEASE HELP! Thanks.

Hi Cath,
Yes, it is a by default settings to delete meeting requests after it is responded. As what Vasil says, we can change the following Outlook settings to leave the meeting request message in Inbox:
1. Click File > Options.
2. In Mail option, on Send messages part, uncheck Delete meeting requests and notifications from Inbox after responding option.
3. Click OK to save the settings.
Then check whether the issue persists.
Regards,
Winnie Liang
TechNet Community Support

Corp Time Outlook Connector

Is there any news on better sync between Corp Time and Outlook? Our company uses the old Outlook Connector tool.
Is there a newer version of Outlook Connector? I am on V3.3. I heard that there was V3.4 or V4 that has reduced many of the bugs.
Also, any news on accessing the web based Corp Time site from the new Cell Phones? I have web access on my Samsung A500 but it is only usefull on websites that have "mobile" version.
Our company also uses the old CT&S tool for accessing our Corp Time Server from outside the firewall. Kind of webmail way of getting to the calendar.
Does anyone know if there is a "mobile" version of this site tool?
The ideal solution would be a way to sync Corp Time with the calendar that is built into a cell phone, without requiring the bulk and overhead of the Palm or Windows CE OS.
Short of that, I'm open to suggestions.

Upon taking over Steltor, Oracle released new versions of most CorporateTime components (client and server), which mostly consisted of them sticking their name on the Steltor products. More significant updates have occurred since then, especially with the release of 9.0.4. Outlook Connector was initially bumped to v3.4 and Oracle released a few point releases. Functionally, versions 3.3 and 3.4 are very similar. The latest release, called Oracle Connector for Outlook 9.0.4, looks and feels much the same as well, though there are some additional features and enhancements. See the release notes:
http://download-east.oracle.com/docs/html/B12029_02/calendar.htm#1006785
Collaboration Suite includes a wireless server that might address your mobile needs, though I haven't worked with it.
Regards,
Jeremy Good
Information Systems
Eastern Mennonite University

Outlook Connector is missing emails

Dear All,
I have a problem with my Outlook Connector. I have OC version 7.3-01.01 with Patch Id: 139162-01. My server is qm.maint built Mar 14 2008 at 17:12:13 (Sun Java(tm) System Messaging Server version 6.36.03).
A user can receive an email which is not visible in his Outlook (Outlook 2003) inbox (it is visible on webmail (UWC) or Blackbery) . They keep receiving emails normaly after that and only when they close and re-open their Outlook they will notice the unread email.
What might be the problem?
Regards,
Savvas

Nevron wrote:
I have a problem with my Outlook Connector. I have OC version 7.3-01.01 with Patch Id: 139162-01. My server is qm.maint built Mar 14 2008 at 17:12:13 (Sun Java(tm) System Messaging Server version 6.36.03).
A user can receive an email which is not visible in his Outlook (Outlook 2003) inbox (it is visible on webmail (UWC) or Blackbery) . Does this only happen to a single user or a number of users?
Is this a new install of Outlook Connector 7.3 or an upgrade from an earlier version?
They keep receiving emails normaly after that and only when they close and re-open their Outlook they will notice the unread email.Have you tried performing an empty/resync on the INBOX folder?
1. Within Outlook, right-click on the folder
2. Select "Properties"
3. Click on the "Advanced" tab
4. Click on "Empty and resync" button.
Regards,
Shane.

What is the wisdom of a calendar program that wrongly changes appt times?

Does anyone know why the iCal program doesn't have safeguards to "lock" appointment dates and times a user sets?
This week has to be a real eye opener for hundreds if not thousands of Mac users whose appointment times were changed by the DST patch.
After the Daylight Savings Time patch, my clock was correct but my appointment times were changed--ALL WERE MOVED FORWARD ONE HOUR. In other words a 10:00 am appointment now reads 11:00 am.
1.) Has this been addressed by Apple?
2.) Is this a problem with all OS versions and all iCal versions?
3.) Finally, if a calendar can't keep times, what good is it?
Does anybody have the definitive answers to these questions?
I'd love to hear Apple has changed this in later versions of iCal. Otherwise, I have to start looking for a new calendar program. I just about lost a major contract yesterday because I showed up at the wrong time because of iCal.
Mac OS X (10.4.9) also use Mac OS X (10.4.3) and .Mac

Robert,
I'm hoping this was a problem addressed by Apple and that because I synced with an older version of ical it came up. In looking through past posts, most are from last year. Your problem was mentioned in past posts. I don't change my times so I haven't seen that problem--use when my clock was adjusted for DST.
I'm looking for someone who knows more about it.

Outlook Connector and shared calendar

Hi.
Looking for some help troubleshooting an issue with shared calendar functionality from Outlook using the Connector.
All server bits are JES-R2. Connector version is 6.0.129.
Connector is working for the most part, but when I try to subscribe to another users calendar from Outlook it is failing. Even when I do a search, and pick the user from the list, the lookup fails to return the user and I get "User not found. Either enter the email id of the user OR click on Search and then click Find to locate the user."
The ldap search I'm seeing in the access logs is curious in the sense that it seems to binding with dn="".
[23/Jun/2004:15:18:54 -0400] conn=346 op=0 msgId=1 - BIND dn="" method=128 versi
on=2
[23/Jun/2004:15:18:54 -0400] conn=346 op=0 msgId=1 - RESULT err=0 tag=97 nentrie
s=0 etime=0 dn=""
[23/Jun/2004:15:18:54 -0400] conn=346 op=1 msgId=2 - SRCH base="o=msgdemo.isdint
egration.com,dc=msgdemo,dc=isdintegration,dc=com" scope=2 filter="(uid=test1@msg
demo.isdintegration.com)" attrs="cn uid mail givenName sn icsCalendar"
[23/Jun/2004:15:18:54 -0400] conn=346 op=1 msgId=2 - RESULT err=0 tag=101 nentri
es=0 etime=0
[23/Jun/2004:15:18:54 -0400] conn=346 op=2 msgId=3 - UNBIND
[23/Jun/2004:15:18:54 -0400] conn=346 op=2 msgId=-1 - closing - U1
[23/Jun/2004:15:18:55 -0400] conn=346 op=-1 msgId=-1 - closed.
This is returning 0 entries, and I believe this is why it is failing. I believe the connector is probably using this search to retrieve the users calendar_id.
If I type the uid into the dialog box (to subscribe) I get this in the ldap:
===============================================================
[23/Jun/2004:14:12:58 -0400] conn=299 op=0 msgId=1 - BIND dn="" method=128 versi
on=2
[23/Jun/2004:14:12:58 -0400] conn=299 op=0 msgId=1 - RESULT err=0 tag=97 nentrie
s=0 etime=0 dn=""
[23/Jun/2004:14:12:58 -0400] conn=299 op=1 msgId=2 - SRCH base="o=msgdemo.isdint
egration.com,dc=msgdemo,dc=isdintegration,dc=com" scope=2 filter="(uid=test1)" a
ttrs="cn uid mail givenName sn icsCalendar"
[23/Jun/2004:14:12:58 -0400] conn=299 op=2 msgId=3 - UNBIND
[23/Jun/2004:14:12:58 -0400] conn=299 op=2 msgId=-1 - closing - U1
[23/Jun/2004:14:12:58 -0400] conn=299 op=1 msgId=2 - RESULT err=0 tag=101 nentri
es=0 etime=0
=================================================================
This time, it has a proper uid (not a mail address) but still returns 0 entries.
Here is a section from s10c.log that accompanies this:
06/23/2004 15:30:38.595 (1560) {Addin } [Debug ]: calid property is missing in folder Shared Calendars with hr = 0x8004010f
06/23/2004 15:30:38.595 (1560) {Store } [Debug ]: S1OC FolderNotification Enter
06/23/2004 15:30:38.606 (1560) {Store } [Debug ]: S1OC FolderNotification GetSocsCalProps 0x80040108
06/23/2004 15:30:38.606 (1560) {Store } [Debug ]: S1OC FolderNotification Exit
06/23/2004 15:30:47.028 (1560) {Addin } [Error ]: wcap returned errno: 61
06/23/2004 15:30:47.028 (1560) {Addin } [Debug ]: getUserPropertiesByEmailID failed : Denied Access
06/23/2004 15:30:51.514 (1560) {Addin } [Error ]: wcap returned errno: 61
06/23/2004 15:30:51.514 (1560) {Addin } [Debug ]: getUserProperties failed : Denied Access: LDAP misconfigured?
06/23/2004 15:30:57.663 (1560) {Addin } [Info ]: Exit - CApplicaton::Uninit
06/23/2004 15:30:57.843 (1560) {Addin } [Info ]: Exit - CApplicaton::Uninit
06/23/2004 15:30:58.074 (1560) {Store } [Debug ]: S1OC CCalPropsList::UnInitCalPropsList Enter count(1) max(10)
06/23/2004 15:30:58.074 (1560) {Store } [Debug ]: S1OC CCalPropsList::UnInitCalPropsList Exit
06/23/2004 15:30:58.074 (1560) {Genrl } [Warning]: =============== Sun ONE Outlook Connector _UnInit=============== 612
Anyone have any clue as to what is the cause/fix???
Thanks,
Jeff Smith

If someone is still following this thread:
The problem seems to stem from the fact that the subscribe to calendar function from the connector (outlook) is searching ldap on uid, but using an email address as a value:
[06/Jul/2004:10:11:10 -0400] conn=8 op=42 msgId=43 - SRCH base="o=msgdemo.isdint egration.com,dc=msgdemo,dc=isdintegration,dc=com" scope=2 filter="(&(uid=[email protected])(!(icsStatus=deleted)))" attrs="cn"
[06/Jul/2004:10:11:10 -0400] conn=8 op=42 msgId=43 - RESULT err=0 tag=101 nentries=0 etime=0

Who ever configure address book with Outlook connector successfully?

I have problem about this configuration (Personal address and Outlook connector) for a while so please tell me if anyone can do it successfully.

I have a solution.
In the directory, some attributes are missing in service declaration for AM. (amauthservice and amauthldapservice).
try to correct with this sample ldif (replace <> by your organization base DN). These parameters are import from a 2005Q1 DS
dn: ou=default, ou=OrganizationConfig, ou=1.0, ou=iPlanetAMAuthService, ou=se
rvices, o=<your org>, <base dn>
changetype: modify
add: sunkeyvalue
sunkeyvalue: iplanet-am-auth-dynamic-profile-creation=false
sunkeyvalue: iplanet-am-auth-admin-auth-module=<AttributeValuePair><Value>com
.sun.identity.authentication.modules.ldap.LDAP REQUIRED</Value></AttributeVa
luePair>
sunkeyvalue: iplanet-am-auth-persistent-cookie-mode=false
sunkeyvalue: iplanet-am-auth-persistent-cookie-time=2000
sunkeyvalue: iplanet-am-auth-alias-attr-name=uid
sunkeyvalue: iplanet-am-auth-default-auth-level=0
sunkeyvalue: iplanet-am-auth-user-naming-attr=uid
sunkeyvalue: iplanet-am-auth-login-failure-lockout-mode=false
sunkeyvalue: iplanet-am-auth-login-failure-count=5
sunkeyvalue: iplanet-am-auth-login-failure-duration=300
sunkeyvalue: iplanet-am-auth-lockout-warn-user=4
sunkeyvalue: iplanet-am-auth-org-config=<AttributeValuePair><Value>com.sun.id
entity.authentication.modules.ldap.LDAP REQUIRED</Value></AttributeValuePair
>
sunkeyvalue: iplanet-am-auth-login-success-url=/amconsole
dn: ou=default, ou=OrganizationConfig, ou=1.0, ou=iPlanetAMAuthLDAPService, o
u=services, o=<your org>, <base dn>
changetype: modify
add: sunkeyvalue
sunkeyvalue: iplanet-am-auth-ldap-user-naming-attribute=uid
sunkeyvalue: iplanet-am-auth-ldap-user-search-attributes=uid
sunkeyvalue: iplanet-am-auth-ldap-return-user-dn=true
sunkeyvalue: iplanet-am-auth-ldap-search-scope=SUBTREE
sunkeyvalue: iplanet-am-auth-ldap-ssl-enabled=false
sunkeyvalue: iplanet-am-auth-ldap-auth-level=0
It seems to work for me...

Sharing Address Books in Outlook Connector

Hi All,
My apologies if this matter has already been dealt with before, but after trying 3 times to make a support call (and being cut-off each time) I have given up in frustration and am asking for help from the group.
We are using JES 2005Q4 and Outlook Connector 7.3.
Some of our users like to share their contacts, and while this is possible using the Connector, I have discovered that if the user is in a different OrgUnit (ie ou=) they dont seem to be able to do this.
I have set up the Directory ACI's and VLV indexes as per the instructions.
Is this possible in this version of JES or is there something else I am missing?

Bruggy wrote:
We are using JES 2005Q4 and Outlook Connector 7.3.Please always provide the full version information e.g. "showrev -p | grep uwc" for UWC/CE patch level.
Also I should point out that OC7.3 is not supported with JES 4. You need to be running Comm-Suite-5 and above components as per:
http://wikis.sun.com/display/CommSuite6/Communications+Suite+6+Component+Products+Release+Notes#CommunicationsSuite6ComponentProductsReleaseNotes-RequirementsforOC7.3
Some of our users like to share their contacts, and while this is possible using the Connector, I have discovered that if the user is in a different OrgUnit (ie ou=) they dont seem to be able to do this.
I have set up the Directory ACI's and VLV indexes as per the instructions.
Is this possible in this version of JES or is there something else I am missing?RFE #6540097 - "get_subscribable_books.wabp does not account for multiple containers".
The following is from the RFE comments however from memory this was also included in the UWC/CE patch readme:
<snip>
A new property is introduced in this fix called "db.sharePabContacts" and it has to be enabled
in the following properties file:
/var/opt/SUNWuwc/WEB-INF/domain/personalstore.properties
By default, this property is set to false. Customers who want to avail this functionality have to
enable this feature by setting it to "true" in the above mentioned properties file:
E.g: db.sharePabContacts = true
With this fix, it is now possible to share the Personal Addressbook with users across different
organizational units but within the same domain and with users whose dn does not begin with uid.
For eg:
A user with a "dn" value :
uid=foo,ou=people,o=domain.com,dc=sun,dc=com
can share his Personal Address Book with a user who has a dn (NOTE: dn is not of the form "uid=..."):
cn=bar,ou=people,o=domain.com,dc=sun,dc=com
Also, users in one organizational unit within the same domain can now share their
Personal Addressbook with users in other organizational units:
For e.g.:
A user in one organizational unit (e.g. ou=employees) in a domain with dn such as mentioned below:
uid=foo,ou=employees,o=domain.com,dc=sun,dc=com
can now share his contacts with a user in another organizational unit (e.g. ou=contractors) within
the same domain such as follows:
uid=bar,ou=contractors,o=domain.com,dc=sun,dc=com
</snip>
This RFE was implemented in UWC6.2 point-patch 125819-09 and above and also in UWC6.3 patch 122793-18 and above. You will still need to log a support-case (use the online method to avoid having to make a phone call) to get a copy of the UWC6.2 point-patch (125819-14 is the latest).
Regards,
Shane.

IPhone 4 shuts down on its own all the time. Sometimes restarts without ability to make calls, receive emails, and the wrong time. Only a restore fixes it. What can I try?

So my iPhone had a broken screen and back for a while, which may have something to do with this. I mean like missing peices. I realize this leads to corrosion and I may have a broken iPhone but this is a really strange problem. It's always shutting off on its own, sometimes in my pocket while locked and sometimes randomly while in use. For example the other day this started happening everytime I started safari. This happens all the time, I usually just restart it and it works for a while. Sometimes after shutting off a few times in a row, after restarting it will show the wrong time, screws up phone calls and says that it cannot locate the gmail server, or something to that extent (won't load emails). The phone calls are weird, I can't receive any. Any calls that are made from the phone, go through on the other side and ring for them, but won't ring or make a connection on my side, also I can't end the call when this happens, it responds to me pressing end by fading the screen to that graytone color that it does before ending usually but stays on that screen whenever you go back to it, only disappearing after reseting. Texts work, not in iMessage, and internet seems to work. The only thing that fixes this condition is a restore. The iphone has been turning itself off over the last 3 months and its been getting progressively worse. Recently its been pretty bad, and then the phone started to do all that weird stuff I've been talking about. That started about 3 weeks ago and has happened 4 times, the last two times relatively close together. This is really annoying and I can't afford to replace it. Do I have to live with it? What can I try? Should I maybe replace the battery? I took the panel off to look at it and the plastic around it was pitted possibly from being really hot.

Please don't respond with useless comments. I've already addressed the fact that my screen was broken a few months ago. My phone may or may not be broken beyond repair either way, as I said before I can't afford a new phone. It's a strange problem because from what I can tell no one else has posted the same problem anywhere I can find. Don't be a dickhole.

Bug in Oracle Outlook Connector 10,1,1,0,2 (1431) and Oracle Forms 6i Rel 2

Hello,
I installed Oracle Outlook Connector. 10,1,1,0,2 (1431)
We are using Oracle Collaboration Suite on a 10g database.
On the Desktop.
I am using.
a) MS/OFFICE Outlook 2003.
b) Oracle Forms and Reports 6i Release 2.
c) Oracle instance client 10.1
d) Windows XP HOME SP2.
What happens?
1) Oracle Run Time Forms 6i and Oracle/MS Outlook 2003 run fine(Work) when I run them ONE AT A TIME!
2) When I run them together(At the same time) I receive this error message. FRM-40735 ORA-06508.
I have narrowed it down to an Oracle Connector 10g problem.
How did I do that?
In XP Home you can create multi-user accounts.
I created a new user account this time I connected to Microsoft Exchange Server 2000.
Results. Oracle runtime 6i works at the same time as MS Outlook 2003.
I am able to use both Programs at the same time. Without any error messages.
Next Step.
I created a new user account and this time I used an Oracle Connector 10.1g for MS Outlook 2003.
Results: Same error message as before. Ran the application(s) at the same time. FRM-40735 and ORA-06508
Please help with any ideas.
Thank you
Dennis

The product managers look through the forum threads periodically. Some more regularly than others. Since I only look at the forum about once a week, I'm probably the least regular of the PMs. Development also scans the forum, but less regularly.
If you have urgent issues that requires action/response from Oracle, it is better to open an SR with Oracle Support.
Hope that helps,
--Marc

Outlook Connector - Unable to view messages in IMAP folders

Hi,
I am trying to get the outlook connector (version 7.2.310.1) and it is fine for collecting mail, calenders etc.
The problem I am having is with IMAP folders.
I have a message rule set up through the webmail view that moves mail with [-SPAM-] in the subject (picked up by our edge filters) into the Junk Email folder. This rule works fine, I can view the messages in there through webamil, if i log in over IMAP using thunderbird or whatever I can see the messages...
The problem is that through the outlook connector, there are no messages in there. The folder exists, I can copy messages in there using outlook and they are visible, but all the mail that is there already is effectively invisible?
Any ideas or have I just missed something?
Josh

Hi,
I have a message rule set up through the webmail view
that moves mail with [-SPAM-] in the subject (picked
up by our edge filters) into the Junk Email
folder. This rule works fine, I can view the
messages in there through webamil, if i log in over
IMAP using thunderbird or whatever I can see the
messages...
The problem is that through the outlook connector,
there are no messages in there. The folder exists, I
can copy messages in there using outlook and they are
visible, but all the mail that is there already is
effectively invisible?Are the messages you copy via Outlook visible via IMAP (Thunderbird) or webmail?
Have you tried re-syncing the folder, to do this:
1. Within Outlook, right-click on the folder
2. Select "Properties"
3. Click on the "Advanced" tab
4. Click on "Empty and resync" button.
Regards,
Shane.

Oracle Outlook Connector - 3.4 works, 9.0.4.* doesn't?

Hi,
My company uses Oracle Corporate Time Server (not sure which version). Our accounts use LDAP to authenticate. When I use Outlook 2002 with Outlook Connector 3.4, everything works. However - when I use it with Oracle Connector 9.0.4.* or later I fail to connect to the calendar server - it tells me username is not recognized. The same username (I checked) works with version 3.4.
Anyone seen this problem?
Anxious to use Outlook 2003 - which is why I tried upgrading to Outlook Connector 9.0.4.11 as it supports Outlook 2003.
Thanks in advance!

Hi Dennis,
Thanks very much.. I will try that today. I've found so many sites adverstising the use of 3.4 for calendar configuration - and have to guess that this problem with 9.0.4.* may be the problem. Will let you know.
Cheers,

Outlook Connector - Cannot share calendars

OK,
I am using the outlook connector sucessfully with the calendar server, messaging server and directory manager. I can collect mail and access the GAL without problem but I am not able to share my calendar with anyone nor view other shared calendars.
To share my calendar with another user I right click on my calendar and go to properties and then the permissions tab. On clicking the Add User button I can enter the userid or search.
If I click search I am able to access the GAL list and select a user. From my directory server logs I can see this action like so:
[05/Apr/2006:14:01:43 +0100] conn=3017 op=0 msgId=1 - BIND dn="uid=jberry,dc=mydomain,dc=com" method=128 version=3
[05/Apr/2006:14:01:43 +0100] conn=3017 op=0 msgId=1 - RESULT err=0 tag=97 nentries=0 etime=0 dn="uid=jberry,dc=mydomain,dc=com"
[05/Apr/2006:14:01:48 +0100] conn=3017 op=5 msgId=6 - SRCH base="uid=aname,dc=myname,dc=com" scope=0 filter="(&(mail=*)(cn=*))" attrs="cn displayName givenName sn initials uid departmentNumber title homePhone mail manager mobile company pager secretary description facsimileTelephoneNumber l physicalDeliveryOfficeName postalCode st street c telephoneNumber mailAlternateAddress objectClass"
[05/Apr/2006:14:01:48 +0100] conn=3017 op=5 msgId=6 - RESULT err=0 tag=101 nentries=1 etime=0]So the search binds to the directory using the uid of my user and returns the required search result (i.e. uid=aname).
Now, when you check your permissions and click OK to add that user as someone who can view your caledar for example it fails with the error message:
User not found. Either enter the email id of the user OR click on Search and then click on Find to locate the user
In the logs for the directory you now get the following:
[05/Apr/2006:14:02:48 +0100] conn=3018 op=0 msgId=1 - BIND dn="" method=128 version=2
[05/Apr/2006:14:02:48 +0100] conn=3018 op=0 msgId=1 - RESULT err=0 tag=97 nentries=0 etime=0 dn=""
[05/Apr/2006:14:02:48 +0100] conn=3018 op=1 msgId=2 - SRCH base="dc=mydomain,dc=com" scope=2 filter="(uid=auser)" attrs="cn uid mail givenName sn icsCalendar"
[05/Apr/2006:14:02:48 +0100] conn=3018 op=1 msgId=2 - RESULT err=0 tag=101 nentries=0 etime=0
[05/Apr/2006:14:02:48 +0100] conn=3018 op=2 msgId=3 - UNBINDSo now, for whatever reason, the connector is trying to bind anonymously to make the changes when anonymous bind is not permitted. Surely it should try and bind with my uid as it did when I searched the GAL to get the data...
... or am I looking at this the wrong way?
oh, I can share a calendar through the web interface and it will synch back down to the connector fine, and once a user is there I can change the permissions I can grant that user through the connector.
(p.s. sorry for the sill wide post)
Thanks
Josh

Check you have configured everything as mentioned in the following URL:
http://docs.sun.com/app/docs/doc/819-2568/6n4rm7fit?a=view
See the following section:
"Shared Calendar LDAP Lookup Configuration"
Pay attention to the fact that you need the following set in ics.conf:
service.wcap.userprefs.ldapproxyauth = "yes"
Let us know if you still have problems. BTW: What build of the connector are you running? You can find this out by selecting "Help -> About Sun Java System Connector for Microsoft Outlook". The build number is given in the top right hand corner of the about window. ie. 7.1.222.4.

Outlook Connector Missing/Wrong Time Appts

Similar Messages

Maybe you are looking for