Outlook Connector - No Phonebook Server

Has anyone been able to use the Outlook Connector without using/supplying a phonebook server in the configuration?
TIA,
Dave

Hi,
There is already an RFE (request for enhancement) to remove the requirement to have the UWC based address-book (#6206267 - Make Address Book Server an optional component when configuring OC) - but as the engineers pointed out, removing the address-book requirement is more about removing UWC - which is also required for the mail-filter UI and out-of-office UI.
There was also concerns about storing contacts locally due to local PST corruption resulting in loss of all data - currently this isn't an issue since email/calendar/addressbook data is stored on the server.
Therefore there are no plans to implement this RFE in the near future. You are more then welcome to push this RFE with your Sun sales reps.
With regards to your UWC service, the latest versions of UWC e.g. 118540-42 have proven to be reliable -- if the number of support requests is anything to go by. What version/patch-level are you running?
Regards,
Shane.

Similar Messages

Outlook Connector Without Mail Server

Installed Java Connector (v 7.2.310.1) for MS Outlook 2002 with SP3.
I have different usernames and passwords for the mail server and the calendar server. Used fake server name for the mail server in the deployment program, and kept getting the 'Unable to connect to the new server' error when installing on the end user computer.
Is it possible to use the connector just to connect to the sun calendar server and not configure the other servers?

Hi,
simba1 wrote:
Installed Java Connector (v 7.2.310.1) for MS Outlook 2002 with SP3.
I have different usernames and passwords for the mail server and the calendar server. Used fake server name for the mail server in the deployment program, and kept getting the 'Unable to connect to the new server' error when installing on the end user computer.
Is it possible to use the connector just to connect to the sun calendar server and not configure the other servers?it's not possible to use the Outlook connector without any of the following components. Missing any of the following will result in a large number of warning/errors (and potentially crashes of outlook):
-> Sun Calendar Server (calendar data)
-> IMAP server (email data)
-> UWC instance (addressbook data)
You could probably use a non-Sun email server but this would obviously not be a supported configuration and the username/password would have to be the same as the other three servers.
Regards,
Shane.

Cannot connect to SMTP server using Outlook Connector

Hi All,
I am trying to connect outlook client to my oracle mail server in OCS. I have succefully installed the Outlook connector but when i try to connect it gives me the following error:
The SMTP server is unavailable.
When i click on retry it gives me the option to enter the Server name, i type the server name with fully qualified domain name. ( i can ping the server from the client pc from where i am trying to connect). But no luck at all.
However i am able to send receive e-mail from the wb client, no issues at all, which means my SMTP server is up and running. I have also verified that listener_es process is up and running.
Any suggestions or ideas would be highly appreciated.
Thanks,
Dipak.

Hi Naqi,
You are absolutely correct. I added the client in /etc/hosts file and it all worked well.
Not just connecting the client but also when i telnet on port 25 i dont get the spam error.
ALso, i have seen lots of your input on the forums and has been very helpfull.
Thankyou so much.
I will be attempting to migrate some of my users via export/import from .pst file. These users have about 9000 mails in their mail box. During the normal migration i had errors and couldnt migrate these users. Let me see how it goes now.
Regards,
Dipak

Calendar server and address book server login fails with outlook connector

Hi all,
I have installed Java Communication Suite 5 according to the doc http://blogs.sun.com/factotum/resource/comms5-install-linux.html.
When i deploy the connector i get the pop ups saying "Server:servername:3080
Error:service not available" also
"Server:servername:80/uwc"
Error:service not available"
asking to login to calendar server and address book server.Clicking "OK" allows install.
In outlook i can send and receive mails but not the meeting requests.It gives the error "login to calendar server" when i create a meeting request.
Please let me know what i have to do to get rid of the error.The username and passwd entered is correct.
Regards,
lmeenakshy

Hi,
When i deploy the connector i get the pop ups saying
"Server:servername:3080
Error:service not available" also Do you get exactly what you say above, or have you substituted in the real server name for "Server:servername:" above?
I would check through the outlook connector deployment configuration to verify that you have inserted valid information into all of the host & port fields - perhaps check the .ini file that is created to see if it has "Server" and "servername" listed.
"Server:servername:80/uwc"
Error:service not available"You are able to log into UWC via the web-interface and access your calendar/pab and edit/modify/delete calendar & addressbook entries right? The services are all up?
asking to login to calendar server and address book
server.Clicking "OK" allows install.The outlook connector deployment software gives you the option to increase the logging level, try that and see what the logs say - what was it trying to connect to/check which failed.
In outlook i can send and receive mails but not the
meeting requests.It gives the error "login to
calendar server" when i create a meeting request.
Please let me know what i have to do to get rid of
the error.The username and passwd entered is
correct.I suspect this is more of an underlying configuration issue that needs to be sorted out, once that happens you shouldn't have to keep logging in.
Regards,
Shane.

Outlook connector problem with Calendar server

Hi
I wanted to use MS outlook as the email client for my sun messaging sytem. For this I have downloaded one program, when I run it , it has created a configurable program folder. Through admin program, I have created one file named xyz.ini , in which I have specified all my sun messaging server, directory server, calendar server. And in User Profiles tab I have chosen that 'create new profile'.
But when I run the exe file xyz.exe, it is trying to install Outlook connector for MS Outlook , but giving the following error.
10:58:30 [5365] Outlook version is 11.0.5608.0.
10:58:30 [5376] Adding MAPI directory 'C:\Program Files\Common Files\System\MAPI\1033' to PATH.
10:58:30 [5475] TMP directory is 'C:\DOCUME~1\32980\LOCALS~1\Temp'.
10:58:32 [5362] Checking Windows version.
10:58:32 [5363] Windows version is 5.0.
10:58:32 [5364] Checking Outlook version.
10:58:32 [5509] Checking default mail client.
10:58:32 [5508] Default mail client is 'Microsoft Outlook'.
10:58:32 [5178] Verifying that Outlook is not running.
10:58:32 [5179] Trying to login to shared session.
10:58:32 [5369] Installing Sun Java System MAPI Service Providers using 'C:\DOCUME~1\32980\LOCALS~1\Temp\Sun Outlook Connector\sunone-mapi-services.msi'.
10:58:36 [5502] Upgrading the Sun Java System MAPI Service Providers.
10:59:20 [5370] Finished installing Sun Java System MAPI Service Providers.
10:59:20 [5366] Checking whether Sun Java System MAPI Service Providers are installed.
10:59:21 [5367] Sun Java System MAPI Service Providers are installed.
10:59:21 [5416] Checking whether Microsoft LDAP Directory MAPI Service Provider is installed.
10:59:21 [5417] Microsoft LDAP Directory MAPI Service Provider is installed.
10:59:21 [5142] ######## Enumerating profiles.
10:59:21 [5145] Examining profile '32980'.
10:59:21 [5149] Profile '32980' has no MSEMS service.
10:59:21 [5145] Examining profile 'Outlook'.
10:59:21 [5146] It is the default profile.
10:59:21 [5149] Profile 'Outlook' has no MSEMS service.
10:59:21 [5156] ######## Selected profile 'Sun Java System': exists=0, converted=0, pstsConverted=0.
10:59:22 [12016] Verifying password for Sun Java System calendar account '10.16.58.49:8082:32980'.
10:59:23 ERROR: [12019] Cannot validate Sun Java System calendar account information.
10:59:23 OpenMsgStore:
10:59:23 Error 0x802C1034
10:59:23 Error: ?????????????????????????????????4??????????????????????????????????????????
10:59:23 Component: ???????????????????4???kA�l
10:59:23 Low level error: 0x00001034
10:59:43 [12016] Verifying password for Sun Java System calendar account '10.16.58.49:8082:32980'.
10:59:44 ERROR: [12019] Cannot validate Sun Java System calendar account information.
10:59:44 OpenMsgStore:
10:59:44 Error 0x802C1034
10:59:44 Error: ?????????????????????????????????4??????????????????????????????????????????
10:59:44 Component: ???????????????????4???kA�l
10:59:44 Low level error: 0x00001034
10:59:46 ERROR: Unable to verify new account information on server 10.16.58.49:8082.
Please suggest me in this issue. I am using Messaging server 6.3, basically installed from Sun Communicate Suite 5 sparc.
My calendar server is running on port 8082
prasad

Refer to cross-post http://forum.java.sun.com/post!reply.jspa?messageID=9964809

Outlook connector + Calendar Server

Hi All,
I have installed Sun one calendar Server 6.3
When i deploy the outlook connector i have message :
Conection to calendar server
Server:192.168.1.1:80
service not available
PS : I can connect when browsing (http://192.168.1.1, work normally).
there is no firewall
The username and passwd entered is correct
I can connect to mail server and LDAP server
Please let me know what i have to do to get rid of the error..
Regards,

Duplicate post, refer here: http://forums.sun.com/thread.jspa?threadID=5382622

Bug in Oracle Outlook Connector 10,1,1,0,2 (1431) and Oracle Forms 6i Rel 2

Hello,
I installed Oracle Outlook Connector. 10,1,1,0,2 (1431)
We are using Oracle Collaboration Suite on a 10g database.
On the Desktop.
I am using.
a) MS/OFFICE Outlook 2003.
b) Oracle Forms and Reports 6i Release 2.
c) Oracle instance client 10.1
d) Windows XP HOME SP2.
What happens?
1) Oracle Run Time Forms 6i and Oracle/MS Outlook 2003 run fine(Work) when I run them ONE AT A TIME!
2) When I run them together(At the same time) I receive this error message. FRM-40735 ORA-06508.
I have narrowed it down to an Oracle Connector 10g problem.
How did I do that?
In XP Home you can create multi-user accounts.
I created a new user account this time I connected to Microsoft Exchange Server 2000.
Results. Oracle runtime 6i works at the same time as MS Outlook 2003.
I am able to use both Programs at the same time. Without any error messages.
Next Step.
I created a new user account and this time I used an Oracle Connector 10.1g for MS Outlook 2003.
Results: Same error message as before. Ran the application(s) at the same time. FRM-40735 and ORA-06508
Please help with any ideas.
Thank you
Dennis

The product managers look through the forum threads periodically. Some more regularly than others. Since I only look at the forum about once a week, I'm probably the least regular of the PMs. Development also scans the forum, but less regularly.
If you have urgent issues that requires action/response from Oracle, it is better to open an SR with Oracle Support.
Hope that helps,
--Marc

Outlook Connector shared calendar lookup doesn't work for non-admins

First the version info:
JMS 6.2-8.04, Directory Server 5.2, Connector 7.2.402.1
Non-admin users are not able to retrieve a list of users from the GAL with Outlook Connector. I, as an admin, do get the list. Here is the the access log for a non-admin user. Note that in the RESULT, nentries is always zero.
mwilson=535258100062018 (non-admin)
-bash-3.00$ grep -i "conn=425940" access.20080923-112603
[23/Sep/2008:11:37:25 -0700] conn=425940 op=-1 msgId=-1 - fd=93 slot=93 LDAP connection from 209.152.33.8 to 10.10.3.3
[23/Sep/2008:11:37:25 -0700] conn=425940 op=0 msgId=1 - BIND dn="uid=535258100062018,ou=people,o=pcc.edu,o=cp" method=128 version=3
[23/Sep/2008:11:37:25 -0700] conn=425940 op=0 msgId=1 - RESULT err=0 tag=97 nentries=0 etime=0 dn="uid=535258100062018,ou=people,o=pcc.edu,o=cp"
[23/Sep/2008:11:37:25 -0700] conn=425940 op=1 msgId=2 - SRCH base="ou=people,o=pcc.edu,o=cp" scope=2 filter="(pdsRole=Employee)" attrs="cn mail uid objectClass"
[23/Sep/2008:11:37:25 -0700] conn=425940 op=1 msgId=2 - SORT cn
[23/Sep/2008:11:37:25 -0700] conn=425940 op=1 msgId=2 - VLV 1:1:1:0 2:19201 (0)
[23/Sep/2008:11:37:25 -0700] conn=425940 op=1 msgId=2 - RESULT err=0 tag=101 nentries=0 etime=0
[23/Sep/2008:11:37:25 -0700] conn=425940 op=2 msgId=3 - SRCH base="ou=people,o=pcc.edu,o=cp" scope=2 filter="(pdsRole=Employee)" attrs="uid mail cn title company telephoneNumber physicalDeliveryOfficeName objectClass"
[23/Sep/2008:11:37:25 -0700] conn=425940 op=2 msgId=3 - SORT cn
[23/Sep/2008:11:37:25 -0700] conn=425940 op=2 msgId=3 - VLV 0:8:0:0 1:19201 (0)
[23/Sep/2008:11:37:25 -0700] conn=425940 op=2 msgId=3 - RESULT err=0 tag=101 nentries=0 etime=0
[23/Sep/2008:11:39:26 -0700] conn=425940 op=3 msgId=4 - UNBIND
[23/Sep/2008:11:39:26 -0700] conn=425940 op=3 msgId=-1 - closing - U1
[23/Sep/2008:11:39:26 -0700] conn=425940 op=-1 msgId=-1 - closed.
Next, I followed the steps outlined in http://docs.sun.com/app/docs/doc/819-5200/gbnse?l=en&a=view&q=shared+calendar+ldap+lookup.
I set service.wcap.userprefs.ldapproxyauth = "yes"
I have the ACI entries as specified in that document.
(targetattr = "mail || uid || icsCalendar || givenName || sn || cn")
(targetfilter = (|(objectClass=icscalendaruser)(objectClass=icscalendarresource)))
(version 3.0;acl "Allow Calendar administrators to proxy - product=ics,class=admin,num=2,version=1";
allow (proxy)(groupdn = "ldap:///cn=Calendar Administrators, ou=Groups, o=cp");)
(targetattr = "mail || uid || icsCalendar || givenName || sn || cn")
(targetfilter = (|(objectClass=icscalendaruser)(objectClass=icscalendarresource)))
(version 3.0;
acl "Allow Calendar users to read and search other users - product=ics,class=admin,num=3,version=1";
allow (read,search)
(userdn = "ldap:///uid=*,ou=People,o=pcc.edu,o=cp")
The only oddity I see is that the ACI entries are not passed down to the next directory levels.
Any thoughts?
David.

I reviewed the document and I believe the VLV browsing indexes are setup and functional. I've also checked the ACI entries and they look correct. (The document doesn't mention the ACI entries for proxy authentication.) As I said, an admin user can retrieve names from the GAL, a non-admin user cannot. The only difference in the access log is the returned nentries value.
./ldapsearch -h vmpt1 -p 389 -D "uid={uid},ou=People,o=pcc.edu,o=cp" -w {passwd} \
-b "ou=People,o=pcc.edu,o=cp" -x -s "sub" -S "cn" \
-G "1:1:dpelinka" "pdsRole=Employee" uid
results for admin user
-bash-3.00$ grep "conn=838261" access
[25/Sep/2008:14:30:30 -0700] conn=838261 op=-1 msgId=-1 - fd=165 slot=165 LDAP connection from 10.10.3.5 to 10.10.3.3
[25/Sep/2008:14:30:30 -0700] conn=838261 op=0 msgId=1 - BIND dn="uid=311914191753070,ou=People,o=pcc.edu,o=cp" method=128 version=3
[25/Sep/2008:14:30:30 -0700] conn=838261 op=0 msgId=1 - RESULT err=0 tag=97 nentries=0 etime=0 dn="uid=311914191753070,ou=people,o=pcc.edu,o=cp"
[25/Sep/2008:14:30:30 -0700] conn=838261 op=1 msgId=2 - SRCH base="ou=people,o=pcc.edu,o=cp" scope=2 filter="(pdsRole=Employee)" attrs="uid"
[25/Sep/2008:14:30:30 -0700] conn=838261 op=1 msgId=2 - SORT cn
[25/Sep/2008:14:30:30 -0700] conn=838261 op=1 msgId=2 - VLV 1:1:dpelinka 4799:19235 (0)
[25/Sep/2008:14:30:30 -0700] conn=838261 op=1 msgId=2 - RESULT err=0 tag=101 nentries=3 etime=0
[25/Sep/2008:14:30:30 -0700] conn=838261 op=2 msgId=3 - UNBIND
[25/Sep/2008:14:30:30 -0700] conn=838261 op=2 msgId=-1 - closing - U1
[25/Sep/2008:14:30:30 -0700] conn=838261 op=-1 msgId=-1 - closed.
results for non-admin user:
-bash-3.00$ grep "conn=839346" access
[25/Sep/2008:14:32:47 -0700] conn=839346 op=-1 msgId=-1 - fd=226 slot=226 LDAP connection from 10.10.3.5 to 10.10.3.3
[25/Sep/2008:14:32:47 -0700] conn=839346 op=0 msgId=1 - BIND dn="uid=299899598658566,ou=People,o=pcc.edu,o=cp" method=128 version=3
[25/Sep/2008:14:32:47 -0700] conn=839346 op=0 msgId=1 - RESULT err=0 tag=97 nentries=0 etime=0 dn="uid=299899598658566,ou=people,o=pcc.edu,o=cp"
[25/Sep/2008:14:32:47 -0700] conn=839346 op=1 msgId=2 - SRCH base="ou=people,o=pcc.edu,o=cp" scope=2 filter="(pdsRole=Employee)" attrs="uid"
[25/Sep/2008:14:32:47 -0700] conn=839346 op=1 msgId=2 - SORT cn
[25/Sep/2008:14:32:47 -0700] conn=839346 op=1 msgId=2 - VLV 1:1:dpelinka 4799:19235 (0)
[25/Sep/2008:14:32:47 -0700] conn=839346 op=1 msgId=2 - RESULT err=0 tag=101 nentries=0 etime=0
[25/Sep/2008:14:32:47 -0700] conn=839346 op=2 msgId=3 - UNBIND
[25/Sep/2008:14:32:47 -0700] conn=839346 op=2 msgId=-1 - closing - U1
[25/Sep/2008:14:32:47 -0700] conn=839346 op=-1 msgId=-1 - closed.

Oracle Outlook Connector - 3.4 works, 9.0.4.* doesn't?

Hi,
My company uses Oracle Corporate Time Server (not sure which version). Our accounts use LDAP to authenticate. When I use Outlook 2002 with Outlook Connector 3.4, everything works. However - when I use it with Oracle Connector 9.0.4.* or later I fail to connect to the calendar server - it tells me username is not recognized. The same username (I checked) works with version 3.4.
Anyone seen this problem?
Anxious to use Outlook 2003 - which is why I tried upgrading to Outlook Connector 9.0.4.11 as it supports Outlook 2003.
Thanks in advance!

Hi Dennis,
Thanks very much.. I will try that today. I've found so many sites adverstising the use of 3.4 for calendar configuration - and have to guess that this problem with 9.0.4.* may be the problem. Will let you know.
Cheers,

Outlook Connector - Cannot share calendars

OK,
I am using the outlook connector sucessfully with the calendar server, messaging server and directory manager. I can collect mail and access the GAL without problem but I am not able to share my calendar with anyone nor view other shared calendars.
To share my calendar with another user I right click on my calendar and go to properties and then the permissions tab. On clicking the Add User button I can enter the userid or search.
If I click search I am able to access the GAL list and select a user. From my directory server logs I can see this action like so:
[05/Apr/2006:14:01:43 +0100] conn=3017 op=0 msgId=1 - BIND dn="uid=jberry,dc=mydomain,dc=com" method=128 version=3
[05/Apr/2006:14:01:43 +0100] conn=3017 op=0 msgId=1 - RESULT err=0 tag=97 nentries=0 etime=0 dn="uid=jberry,dc=mydomain,dc=com"
[05/Apr/2006:14:01:48 +0100] conn=3017 op=5 msgId=6 - SRCH base="uid=aname,dc=myname,dc=com" scope=0 filter="(&(mail=*)(cn=*))" attrs="cn displayName givenName sn initials uid departmentNumber title homePhone mail manager mobile company pager secretary description facsimileTelephoneNumber l physicalDeliveryOfficeName postalCode st street c telephoneNumber mailAlternateAddress objectClass"
[05/Apr/2006:14:01:48 +0100] conn=3017 op=5 msgId=6 - RESULT err=0 tag=101 nentries=1 etime=0]So the search binds to the directory using the uid of my user and returns the required search result (i.e. uid=aname).
Now, when you check your permissions and click OK to add that user as someone who can view your caledar for example it fails with the error message:
User not found. Either enter the email id of the user OR click on Search and then click on Find to locate the user
In the logs for the directory you now get the following:
[05/Apr/2006:14:02:48 +0100] conn=3018 op=0 msgId=1 - BIND dn="" method=128 version=2
[05/Apr/2006:14:02:48 +0100] conn=3018 op=0 msgId=1 - RESULT err=0 tag=97 nentries=0 etime=0 dn=""
[05/Apr/2006:14:02:48 +0100] conn=3018 op=1 msgId=2 - SRCH base="dc=mydomain,dc=com" scope=2 filter="(uid=auser)" attrs="cn uid mail givenName sn icsCalendar"
[05/Apr/2006:14:02:48 +0100] conn=3018 op=1 msgId=2 - RESULT err=0 tag=101 nentries=0 etime=0
[05/Apr/2006:14:02:48 +0100] conn=3018 op=2 msgId=3 - UNBINDSo now, for whatever reason, the connector is trying to bind anonymously to make the changes when anonymous bind is not permitted. Surely it should try and bind with my uid as it did when I searched the GAL to get the data...
... or am I looking at this the wrong way?
oh, I can share a calendar through the web interface and it will synch back down to the connector fine, and once a user is there I can change the permissions I can grant that user through the connector.
(p.s. sorry for the sill wide post)
Thanks
Josh

Check you have configured everything as mentioned in the following URL:
http://docs.sun.com/app/docs/doc/819-2568/6n4rm7fit?a=view
See the following section:
"Shared Calendar LDAP Lookup Configuration"
Pay attention to the fact that you need the following set in ics.conf:
service.wcap.userprefs.ldapproxyauth = "yes"
Let us know if you still have problems. BTW: What build of the connector are you running? You can find this out by selecting "Help -> About Sun Java System Connector for Microsoft Outlook". The build number is given in the top right hand corner of the about window. ie. 7.1.222.4.

Can't install Outlook Connector - authentication problem

Hello:
We are not being able to install Outlook Connector in two PC's running Windows XP. After filling authentication data the installation program states that the information is not valid. With the same installation files and the same authentication data we can install Outlook Connector in every other computer without any problem. We have tried to install the Microsoft update for root certificates KB931125 but the problem still occur. We have been performing search regarding errors logged in sjoc.log with no success:
07/14/2010 18:44:48.687 (0x00d0) {Genrl } [Warning]: =============== Sun ONE Outlook Connector OpenLogFile ===============
07/14/2010 18:44:48.687 (0x00d0) {Genrl } [Warning]: =============== Sun ONE Outlook Connector: Version 7.3.110.0
07/14/2010 18:44:49.421 (0x00d0) {Genrl } [Warning]: =============== Sun ONE Outlook Connector _UnInit===============
07/14/2010 18:45:04.734 (0x0a60) {Genrl } [Warning]: =============== Sun ONE Outlook Connector OpenLogFile ===============
07/14/2010 18:45:04.734 (0x0a60) {Genrl } [Warning]: =============== Sun ONE Outlook Connector: Version 7.3.110.0
07/14/2010 18:45:05.062 (0x0a60) {Genrl } [Warning]: =============== Sun ONE Outlook Connector _UnInit===============
07/14/2010 18:45:46.640 (0x0da4) {Genrl } [Warning]: =============== Sun ONE Outlook Connector OpenLogFile ===============
07/14/2010 18:45:46.671 (0x0da4) {Genrl } [Warning]: =============== Sun ONE Outlook Connector: Version 7.3.110.0
07/14/2010 18:45:46.671 (0x0da4) {Store } [Warning]: S1OC ******ServiceEntry****** Opened log file.
07/14/2010 18:45:46.718 (0x0da4) {Store } [Warning]: MSG_SERVICE_CREATE
07/14/2010 18:45:46.828 (0x0da4) {Store } [Error ]: S1OC ServiceEntry Create - UI Not allowed?
07/14/2010 18:45:46.828 (0x0da4) {Genrl } [Warning]: =============== Sun ONE Outlook Connector _UnInit===============
07/14/2010 18:45:46.875 (0x0da4) {Genrl } [Warning]: =============== Sun ONE Outlook Connector OpenLogFile ===============
07/14/2010 18:45:46.875 (0x0da4) {Genrl } [Warning]: =============== Sun ONE Outlook Connector: Version 7.3.110.0
07/14/2010 18:45:46.875 (0x0da4) {Store } [Warning]: S1OC ******ServiceEntry****** Opened log file.
07/14/2010 18:45:46.890 (0x0da4) {Store } [Warning]: MSG_SERVICE_CONFIGURE
07/14/2010 18:45:46.890 (0x0da4) {Store } [Error ]: S1OC ServiceEntry Config - GetProps PropCount = 72
07/14/2010 18:45:47.281 (0x0da4) {Store } [Error ]: S1OC ServiceEntry Config - GAL Server Name = directorio.mydomain.com
07/14/2010 18:45:47.312 (0x0da4) {Genrl } [Warning]: =============== Sun ONE Outlook Connector _UnInit===============
07/14/2010 18:45:47.656 (0x0da4) {Genrl } [Warning]: =============== Sun ONE Outlook Connector OpenLogFile ===============
07/14/2010 18:45:47.656 (0x0da4) {Genrl } [Warning]: =============== Sun ONE Outlook Connector: Version 7.3.110.0
07/14/2010 18:45:47.734 (0x0da4) {Genrl } [Warning]: =============== Sun ONE Outlook Connector OpenLogFile ===============
07/14/2010 18:45:47.734 (0x0da4) {Genrl } [Warning]: =============== Sun ONE Outlook Connector: Version 7.3.110.0
07/14/2010 18:45:47.734 (0x0da4) {Store } [Warning]: S1OC ******MSProviderInit****** Opened log file.
07/14/2010 18:45:47.843 (0x0da4) {Store } [Error ]: CS1OCConnection::ValidateFolderTree Get Drafts failed 0x80004005
07/14/2010 18:45:47.843 (0x0da4) {Store } [Error ]: CS1OCConnection::ValidateFolderTree Get Contacts failed 0x80004005
07/14/2010 18:45:47.843 (0x0da4) {Store } [Error ]: CS1OCConnection::ValidateFolderTree Get Calendar failed 0x80004005
07/14/2010 18:45:47.843 (0x0da4) {Store } [Error ]: CS1OCConnection::ValidateFolderTree Get Tasks failed 0x80004005
07/14/2010 18:45:47.843 (0x0da4) {Store } [Error ]: CS1OCConnection::ValidateFolderTree Get Notes failed 0x80004005
07/14/2010 18:45:47.843 (0x0da4) {Store } [Error ]: CS1OCConnection::ValidateFolderTree Get Journal failed 0x80004005
07/14/2010 18:45:51.984 (0x0da4) {XIMAP } [Error ]: mm_log ERROR: Can not authenticate to IMAP server: Authentication failed.
07/14/2010 18:45:52.031 (0x0da4) {XIMAP } [Error ]: XIMAPStore::setActiveMS: mail_open failed (folder={mail.mydomain.com:993/ssl/novalidate-cert}INBOX)
07/14/2010 18:45:52.031 (0x0da4) {XIMAP } [Error ]: XIMAPStoreImpl::login: setActiveMS failed: 1
07/14/2010 18:45:52.031 (0x0da4) {Store } [Error ]: CSOMSConnection::Logon error in m_lpXImapStore->login(): 1
07/14/2010 18:45:52.031 (0x0da4) {Store } [Error ]: CSOMSConnection::Logon m_lpXImapStore->login failed 1
07/14/2010 18:45:52.031 (0x0da4) {Store } [Warning]: CSOMSConnection::Logon not setting m_bSpoolerLogonDelayed to false
07/14/2010 18:45:52.031 (0x0da4) {Store } [Error ]: CS1OCConnection::Logon MAIL Logon failed 0x802c1001
07/14/2010 18:45:52.031 (0x0da4) {Store } [Warning]: CS1OCConnection::Uninitialize Final release(1) of Our MDB
07/14/2010 18:45:52.250 (0x0da4) {Genrl } [Warning]: =============== Sun ONE Outlook Connector: Version 7.3.110.0
07/14/2010 18:45:52.250 (0x0da4) {Store } [Warning]: S1OC ******ServiceEntry****** Opened log file.
07/14/2010 18:45:52.250 (0x0da4) {Store } [Warning]: MSG_SERVICE_INSTALL MSG_SERVICE_UNINSTALL
07/14/2010 18:45:52.312 (0x0da4) {Genrl } [Warning]: =============== Sun ONE Outlook Connector _UnInit===============
07/14/2010 18:45:52.375 (0x0da4) {Genrl } [Warning]: =============== Sun ONE Outlook Connector _UnInit===============
Any clue will be very helpful. Thanks in advance.

shjorth wrote:
Deprecated wrote:
We are not being able to install Outlook Connector in two PC's running Windows XP. After filling authentication data the installation program states that the information is not valid.Are you able to connect to the users account using the same authentication details/host/port information using another IMAP client e.g. Thunderbird?
I'm sorry, I forgot saying that via webmail the authentication is OK, so user and password information is right. I have asked the users to try what you suggest.
shjorth wrote:
Deprecated wrote:
With the same installation files and the same authentication data we can install Outlook Connector in every other computer without any problem. We have tried to install the Microsoft update for root certificates KB931125 but the problem still occur.Are you using a self-signed certificate or one signed by a vendor (which one)?
Also have you tried accessing the https webmail front-end using Internet Explorer and permanently accepting the SSL certificate?We use a Verisign certificate.
I have asked the used to try to permanentle accepting the certificate. I have the feeling that it's a certificate relating problem and I think that it can make it.
07/14/2010 18:45:51.984 (0x0da4) {XIMAP } [Error ]: mm_log ERROR: Can not authenticate to IMAP server: Authentication failed.What is the error at the Messaging Server end (imap logs)?I was not able to find anything relevant, the only thing that I thing that could be related (because of date and time) is:
[14/Jul/2010:18:45:00 +0200] mail1 imapd[3106]: Account Notice: close [127.0.0.1:47197] [unauthenticated] 2010/7/14 18:45:00 0:00:00
32 606 0
[14/Jul/2010:18:45:05 +0200] mail1 imapd[3106]: Account Notice: close [10.75.80.129:1753] [unauthenticated] 2010/7/14 18:45:05 0:00:
00 0 316 0
Thank you very much, Shane, I really appreciate your help.

Outlook Connector

Hi,
I am trying to configureoutlook with JES 2005Q1 server using sun java system connector version 7.I am getting the following error:
19:11:39 [5362] Checking Windows version.
19:11:39 [5363] Windows version is 5.1.
19:11:39 [5364] Checking Outlook version.
19:11:39 [5365] Outlook version is 11.0.5608.0.
19:11:39 [5509] Checking default mail client.
19:11:39 [5508] Default mail client is 'Microsoft Outlook'.
19:11:39 [5178] Verifying that Outlook is not running.
19:11:39 [5179] Trying to login to shared session.
19:11:39 [5369] Installing Sun Java System MAPI Service Providers using 'C:\DOCUME~1\mk19300\Local Settings\Temp\Sun Outlook Connector\sjoc-mapi-services.msi'.
19:11:59 ERROR: [5351] Unable to install Sun Java System MAPI Service Providers.
19:11:59 MsiInstallProduct(C:\DOCUME~1\mk19300\Local Settings\Temp\Sun Outlook Connector\sjoc-mapi-services.msi):
19:11:59 [0x00000643] Fatal error during installation.
19:11:59 [5366] Checking whether Sun Java System MAPI Service Providers are installed.
19:11:59 [5368] Sun Java System MAPI Service Providers are not installed:
19:11:59 File 'C:\Program Files\Common Files\SYSTEM\MSMAPI\1033\SJMS32.DLL' does not exist.
19:12:01 ERROR: [5351] Unable to install Sun Java System MAPI Service Providers.
19:12:01 ERROR: Unable to install Sun Java System MAPI Service Providers.
When i searched for this dll in net i couldn't find any results. Can anyone tell me why this error is occuring?

I had this problem when I began using the connector last March.
It is looking for that DLL file in that particular directory. For some reason, some of the pc's are missing it depending on the software installed and version of Windows.
You just need to copy one from another pc and put it in the recommended folder and re-run the installer.
FROM: http://rulink.rutgers.edu/outlookconnector.html
"In a clean Outlook 2003 installation, you should have c:\Program Files\Common Files\System\MSMAPI, but not ...\System\MAPI. MAPI is the location from previous versions. Unfortunately the Sun installer gets confused. It puts files in MSMAPI but expects to find them in MAPI. Copy all of MSMAPI to MAPI, e.g. using "xcopy /e/h MSMAPI MAPI". After that, you should have c:\Program Files\Common Files\System\MAPI\1033 with a number of files in it. "

Outlook Connector 7.3 Globa Address book problem

Using Outlook connector 7.3 with Outlook 2003, Against Comms Suite 6; DS5.2p6 (Sun professional services install)
I've configured the Global address book to use our 5.2p6 DS server, and added the VLV indexes as described here
http://wikis.sun.com/display/CommSuite/Configuring+Directory+VLV+Browsing+for+Connector+for+Outlook
But, when searching the GAB in outlook I get:
"The action could not be completed"
The debug log shows
10/08/2009 15:49:59.015 (0x0a58) {Gal   } [Error ]: XLdap::findEntryStartsWith Ldap search returned 0x32
10/08/2009 15:49:59.015 (0x0a58) {Gal   } [Error ]: XLdap::findEntryStartsWith ldap error : VLV Control
10/08/2009 15:49:59.015 (0x0a58) {Gal   } [Error ]: CLDAPConnection::FindEntry m_pXLdap->findEntryStartsWith failed 1025
I've verified the LDAP GAB server is reachable from the client
Any hits as to where the problem is?
TIA

FYI;
It appears that a combination of anonymous binding and the search filter caused this issue

Outlook connector problem

I am using outlook connector of version
Patch-ID# 125361-03
NOTE:
READ THE TERMS OF THE AGREEMENT ("AGREEMENT") IN THE LEGAL_LICENSE.TXT
FILE CAREFULLY BEFORE USING THIS SOFTWARE. BY USING THE SOFTWARE, YOU
AGREE TO THE TERMS OF THIS AGREEMENT. IF YOU DO NOT AGREE TO ALL OF THE
TERMS, PROMPTLY DESTROY THE UNUSED SOFTWARE.
Keywords: outlook connector 7.2u1 java_es windows 2006q3
Synopsis: Outlook Connector 7.2u1_402: Windows 2000, Windows XP, Windows 2003 and Outlook 2000 SP3, Outlook 2002 SP2, Outlook 2003, Outlook 2007(12.0.4518.1014)
Date: May/21/2007
Install Requirements: Additional instructions may be listed below
Solaris Release:
Note: Microsoft Windows
SunOS Release:
Note: Windows_2000, Windows_XP, Windows_2003
Unbundled Product: Outlook Connector
Unbundled Release: 7.2u1
Xref:
Topic: Outlook Connector 7.2u1 Windows 2000, Windows XP, Windows 2003I have installed the above software and created a profile and I got a exe file created for me. But when I click on exe file , self-extractor was run and there is a window and I supposed to click on 'Next' button. Once I did that Nothing is happening, the window getting hanged.
the log file showing these details
--- 2008/04/16 16:54 ---
16:54:02 [8138] Application: C:\DOCUME~1\Admin\LOCALS~1\Temp\Sun Outlook Connector\desktop.exe
16:54:02 [8139] Product version: 7.2.402.1
16:54:02 [8140] File version: 7.2.402.1
--- Begin INI file 'C:\DOCUME~1\Admin\LOCALS~1\Temp\Sun Outlook Connector\desktop.ini' ---
[General]
Package=package.bat
ConfirmInstall=0
PostStatus=0
VerboseLog=0
Silent=0
InstallServiceProviders=0
InstallWebPublishing=0
NewProfileName=ithellp
ProfileMode=Create
ShareLogs=1
LogFile=\\192.168.1.138\Outlook 2003 SP3
NewProfileAsDefault=1
StatusLogFile=
WebPublishingKit=
MaxPstSizeMB=100
MaxAggregatePstSizesMB=400
DiskHeadRoomMB=64
PasswordedPstDisposition=Convert
PstUpdateMode=All
CreateConvert=1
ProfileConvert=Create
ConvertFromExchange=1
ConvertFromPOP=1
ConvertFromIMAP=1
UpgradeFromSun6=1
UpgradeFromSun7=1
ConvertExchangeContacts=1
ConvertChangeProfileName=0
ConvertProfileName=Sun Java System
MigratePopImapCalendar=1
KeepPopImapLocalPst=1
KeepSunLocalPst=0
RequireMSXML=1
UseOffice2003Pst=0
ABNewSearchPath=Contacts_GAL
ABNewDefaultDir=Contacts
[NewAccount_Admin]
SavePassword=1
[email protected]
FullName=it help
Username=ithelp
~Password=A(Hk8y@wEHWcGEHgvtK1nAMuv9)A
~Confirm=A(8F6gNEcgRCkCFMvprOZi7Yvf)A
[IMAP]
Server=192.168.1.67
Port=143
UseSSL=0
UseMaxCachedMsgPartKB=0
MaxCachedMsgPartKB=50
PollingIntervalSec=60
EnableCache=1
FolderNameMap=outlook
[SMTP]
Server=192.168.1.67
Port=25
UseSSL=0
BccToSender=0
UseAuth=0
BackgroundPoll=0
[S1OC]
UseDefaultStore=1
UseSSL=0
Server=192.168.1.67
Port=8009
PollingIntervalSec=60
[FreeBusy]
Server=192.168.1.67
Port=8009
[ABServer]
UseSSL=0
Server=192.168.1.67
Port=8181
RelativePath=uwc
[GAL]
SizeLimit=100
TimeLimitSec=60
Port=389
Host=192.168.1.67
UseSSL=0
SearchBase=dc=avesthagen,dc=com
UseAuth=0
DNPattern=
Filter=(&(mail=*)(cn=*))
SortKey=cn
CollationRule=oid=1.3.6.1.4.1.42.2.27.9.4.34.1
ResolveNameFilter=(&(mail=*)(|(mail=%s*)(|(cn=%s*)(|(sn=%s*)(givenName=%s*)))))
AdvanceSearchFilter=(cn=%s*),(givenName=%s*),(sn=%s*),(title=%s*),(uid=%s*),(company=%s*),(departmentNumber=%s*),(physicalDeliveryOfficeName=%s*),(l=*%s*)
UseDNPattern=1
ShowMemberOF=0
isMemberOf=isMemberOf
[UserPreference]
UsrPrefHost=192.168.1.67
UsrPrefPort=389
UsrPrefUseSSL=0
UsrPrefSearchBase=
UsrPrefRetrieveSetting=0
UsrPrefDNPattern=
UsrPrefOutOfOffice=
UsrPrefLookup=
UsrPrefAttribList=
UserPrefCalDelegateAttributeList=mailGrantSendPermissionsTo,calendarDelegateMailAddress,calendarDelegateForwardMethod
UserPrefCalDelegateON=0
--- End INI file 'C:\DOCUME~1\Admin\LOCALS~1\Temp\Sun Outlook Connector\desktop.ini' ---
16:54:02 [5376] Adding MAPI directory 'C:\Program Files\Common Files\SYSTEM\MSMAPI\1033' to PATH.
16:54:02 [5475] TMP directory is 'C:\DOCUME~1\Admin\LOCALS~1\Temp'.
16:54:03 [5362] Checking Windows version.
16:54:03 [5363] Windows version is 5.1.
16:54:03 [5364] Checking Outlook version.
16:54:03 [5365] Outlook version is 12.0.0.0.
16:54:03 [5509] Checking default mail client.
16:54:03 [5508] Default mail client is 'Microsoft Outlook'.
16:54:03 [5178] Verifying that Outlook is not running.
16:54:03 [5179] Trying to login to shared session.
16:54:03 [5366] Checking whether Sun Java System MAPI Service Providers are installed.
16:54:03 [5367] Sun Java System MAPI Service Providers are installed.
16:54:03 [12029] Installing IMAP folder name mapping file 'C:\DOCUME~1\Admin\LOCALS~1\Temp\Sun Outlook Connector\outlook_folders.map'.
16:54:04 [5142] ######## Enumerating profiles.
16:54:04 [5145] Examining profile 'Outlook'.
16:54:04 [5146] It is the default profile.
16:54:04 [12031] Profile 'Outlook' already has Sun Java System service.
16:54:04 [5156] ######## Selected profile 'ithellp': exists=0, converted=0, pstsConverted=0.If anyone knows please reply to me

prasadnvr wrote:
I have installed the above software and created a profile and I got a exe file created for me. But when I click on exe file , self-extractor was run and there is a window and I supposed to click on 'Next' button. Once I did that Nothing is happening, the window getting hanged.What happened when you killed the window and tried again?
Does this issue only occur on this one system, or other systems as well?
16:54:04 [5142] ######## Enumerating profiles.
16:54:04 [5145] Examining profile 'Outlook'.
16:54:04 [5146] It is the default profile.
16:54:04 [12031] Profile 'Outlook' already has Sun Java System service.Have you installed the Outlook connector on this system before?
16:54:04 [5156] ######## Selected profile 'ithellp': exists=0, converted=0, pstsConverted=0.Looks like it was trying to create a new profile and hung in this process... I couldn't see any recent bugs around this issue.
Regards,
Shane.

Problem with outlook connector LDAP Directory MAPI Service Provider is not

Hi,
I have very basic problem with sun outlook connector client.
I am using sun java system connector deployment tools to create client installation script, on first page I have to supply the location for web publisher and Microsoft LDAP service, I can find web publisher and I don't have any clue about location of LDAP services and without this my client instaltion script keep failing with following error.
The Microsoft LDAP Directory MAPI Service Provider is not installed.
--- 2006/09/25 14:14 ---
14:14:25 [5365] Outlook version is 11.0.5608.0.
14:14:25 [5376] Adding MAPI directory 'C:\Program Files\Common Files\System\MAPI\1033' to PATH.
14:14:25 [5475] TMP directory is 'C:\DOCUME~1\MMESKA~1\LOCALS~1\Temp'.
14:14:26 [5362] Checking Windows version.
14:14:26 [5363] Windows version is 5.1.
14:14:26 [5364] Checking Outlook version.
14:14:26 [5509] Checking default mail client.
14:14:26 [5508] Default mail client is 'Microsoft Outlook'.
14:14:26 [5178] Verifying that Outlook is not running.
14:14:26 [5179] Trying to login to shared session.
14:14:26 [5369] Installing Sun Java System MAPI Service Providers using 'C:\DOCUME~1\MMESKA~1\LOCALS~1\Temp\Sun Outlook Connector\sunone-mapi-services.msi'.
14:14:28 [5502] Upgrading the Sun Java System MAPI Service Providers.
14:14:38 [5370] Finished installing Sun Java System MAPI Service Providers.
14:14:38 [5366] Checking whether Sun Java System MAPI Service Providers are installed.
14:14:38 [5367] Sun Java System MAPI Service Providers are installed.
14:14:38 [5416] Checking whether Microsoft LDAP Directory MAPI Service Provider is installed.
14:14:38 [5418] The Microsoft LDAP Directory MAPI Service Provider is not installed:
14:14:38 File 'C:\Program Files\Common Files\System\MAPI\1033\EMABLT32.DLL' does not exist.
14:14:38 [5416] Checking whether Microsoft LDAP Directory MAPI Service Provider is installed.
14:14:38 [5418] The Microsoft LDAP Directory MAPI Service Provider is not installed:
14:14:38 File 'C:\Program Files\Common Files\System\MAPI\1033\EMABLT32.DLL' does not exist.
14:14:38 ERROR: Microsoft LDAP Directory MAPI Service Provider must first be installed.
Thank you for your help.
Best regards
Mo

Hi,
If memory serves, Outlook XP offered the ability to set what address-book connectors were installed, one of which was LDAP (by default enabled). It may be a similar situation with Outlook 2003 (which I assume you are using based on the version number in the debug logs). Try using the Office '03 install CD and see if you can find the LDAP addressbook option and install it.
Regards,
Shane.

Outlook Connector - No Phonebook Server

Similar Messages

Maybe you are looking for