Outlook Contacts do not sort correctly under iCloud

I have recently started mucking around with iCloud (after the unfortunate discontinuation of MobileMe...).
I use MS Outlook 2007 on my PC (Windows 7 64-bit) for my Contacts, Calendar & Tasks. Untill recently, I was syncing my Outlook Contacts & Calendar with my iPhone (latest iOS) via iTunes. All was working fine.
A couple of days ago, I installed the iCloud Control Panel on my PC and gave it a go to see what will happen to my Outlook setup. I enabled just the Contacts in order not to stray out too far...
Once done, iCloud took all the contacts from my personal folder in Outlook and moved them to a new iCloud folder. So now, I have two different Contact folder, the iCloud dedicated one (which is fully populated) and the other one is the one previously used (which is stored in my local .pst file and now empty).
All syncing to the iCloud seems to be working OK - I checked my contacts from the www.icloud.com and they are all there.
The problem I have is withing the new iCloud Contact folder that was created in my Outlook installation. It does not sort my Contacts correctly
I have contacts written both in English and in Greek, depending on where they reside. It seems to get mixed up because of this and mixes up the Greek contacts inbetween the English ones, in a manner that I cannot justify.
Previously when I had all the Contacts in my local .pst file, it was showing the English ones first and then all the Greek ones, both sorted 100% correctly (by the way, this is how it looks as well in my iPhone). I have also enabled an option in Outlook settings which allows me to create a second index for the Contacts in Greek - this creates a second Greek alphabet next to the already existing English one on the right of the Contacts view. None of that seems to have an effect in the case of the iCloud Contacts folder in Outlook, which doesn't sort as it should.
Has anyone come across this issue and is able to offer some assistance?
Regards.

No none, the contacts just do not sort in alphabetical order they should be in. For example I added a name that started with an S but it would not go under the S category of names but rather it would create a new S group at the top of the contact list before the contacts starting in A. The OLD list of names starting with S is still existing and in the right alphabetical order but the new contact would not save under that group but rather as I said in a new group starting with S at the top of the contact list.

Similar Messages

Contacts do not sort correctly

Whenever I add a new contact to my iPhone 4 S, the name goes to the top of my contact list and not where it should be in its alphabetical category, thus sorting of the contact list is not in alphabetical order. I did program it to list contacts by first and last name, I also reset the phone several times but to no avail. I even went to an apple store and no one knew how to solve the problem or why it was happening. Can anyone provide me some assistance in solving this problem ?
Thank you in advance.

No none, the contacts just do not sort in alphabetical order they should be in. For example I added a name that started with an S but it would not go under the S category of names but rather it would create a new S group at the top of the contact list before the contacts starting in A. The OLD list of names starting with S is still existing and in the right alphabetical order but the new contact would not save under that group but rather as I said in a new group starting with S at the top of the contact list.

New iphone 4 outlook contact updates not syncing to phone since i downloaded icloud

Just purchased my first iphone after only using Androids or Blackberry, from Verizon. At the store they helped me set up itunes on my laptop to sync my Outlook Contacts and Calendar to the phone.
It seemed to be working fine until I was offered the opportunity to download iCloud. Now the calendar entries on my computer still transfer to the phone but the contacts are not transferring. When I went back to Verizon to ask...they suddenly have amnesia and told me to contact Apple.
In settings under iCloud I have Mail, Contacts, Calendars all set to "On". I can't see anything else that should be on.
Any suggestions?

I'm having the same problem with one of my apps. I'm just going to wait it out and I feel fairly confident that this issue will clear itself up in time on its own. If not, I'm just going to delete the app...the app is I Say Free so no big whoop.

HT204150 microsoft outlook contacts are not uploading to icloud? how do I get it to upload?

My Microsoft outlook contacts are not uploading to icloud.. how do I correct this ?

I also have this problem, just from the iPhone 5s which makes my life crazy, too.
The problem of having multiple devices doesn't seem to help, but the odd part is when everything I am doing is correct, it still doesn't sync like it used to do before iCloud, and when we had to USB wire connect the iPhone to the Laptop to make contacts sync.
Might I add that I am not using MAIL on my LAPTOP?
but ?Britty sounds like her issue is easier as gmail sometimes can create duplicates so you are in good if you are not having that problem or nightmare...
IF ANYONE ELSE can PLEASE ADD to this THREAD? I would be thankful
as there seems to be a TRENDING on iPhone 5s not syncing with other devices or backwards.....(I have added contacts to the iPhone 5s and they never get added to the iCloud or the iPad or the Addressbook or CONTACTS on the LAPTOP....
This should be working and I have checked the CONTACTS on the laptop GROUPS , iCloud, vs ALL ON MY MAC
it just isn't syncing and in some cases I am getting a WEB DAV error or CAL error...-1
what is that? iCloud will not sync all contacts?
something is crazy
but I want to remain at 10.8 MOUNTAIN LION and not upgrade to MAVERICKS......or use MAIL on my LAPTOP...just CONTACTS ONLY......

Smart playlist not sorted correctly on ipod

I have a smart playlist in my iTunes 10.0, which contains all podcasts (with play count 0), sorted by release date.
Unfortunately, this playlist is NOT sorted correctly on my ipod (nano, 5th generation). After syncing with itunes, the ipod playlist has some apparently random order (not by release date, not even by name, artist or anything, it really seems random).
It's strange that, if I click on my ipod under "DEVICES" in itunes and click the playlist there, the correct order is shown (by release date). But again, on the ipod it is actually not sorted.
Message was edited by: powerbookuser99

I have a smart playlist for my podcast's and I normally sort them by the date added (oldest to newest) or by release date. No mater what I do now they only show up on my iPhone in date added order newest to oldest and I am unable to re-order them. I have a number of other playlists that work fine it is just this one smart playlist that is acting up. Any suggestions would be appreciated.

My contacts will not sort properly on Macbook Pro

Greetings all,
I'm still trying to learn the Mac OS, only been on it a couple months. Here is my issue, on the Macbook, my contacts will not sort by first name.
On my iPhone and iPad, and when I log in to the iCloud and look at my contacts they are all sorted by First Name, and listed as (First Name, Last Name).
When I go to the Macbook contacts they are sorting by Last Name... I have removed the contacts from my computer, unchecked the contacts rebooted, re-activated the contacts on cloud and they still do not sort the way i want them too....
Can anybody help me please.

You helped me figure it out, I fill like a putz, I did not realize that the Contacts on the Mac OS, actually had its own settings.... I thought they were all controlled by the iCloud settings....
I'm slowly but surely getting things figured out, after using Windows all my life. Thanks a million.

ATV2 not sorting correctly

Has anyone else noticed their ATV2 does not sort TV Shows correctly? Here are a couple of examples -
The Colbert Report is under "T" - AppleTV1 listed it under "C" as it should be
Multiple seasons of of shows are showing up separately. So instead of having a 30ROCK listing in the root list, then clicking that to get to Season 1, Season 2, Season 3 options, I have multiple 30ROCK listings at the root list.
Is there a setting I'm missing somewhere?
Or is ATV2 not sorting correctly?

sneirbo2k7 wrote:
Is there a setting I'm missing somewhere?
No
Or is ATV2 not sorting correctly?
It's doing it differently.
Biggest annoyance for many is that TV Shows now have an entry for each Season rather than Seaons being listed under the main show name.
Also metadata tags used to group related films eg Star Wars, Superman etc, in a common folder no longer works.
http://www.apple.com/feedback/appletv.html
Video playlists don't work properly either.

My icloud account does not sync with my iphone 4s. My contacts do not show up on icloud and I do have "contacts" turned on to backup

My icloud account does not sync with my iphone 4S. My contacts do not turn up on icloud and I do have "contacts" turned on in my phone.

Unchecking them won't help, it will only hide them from view. The issue you're running into is that iCloud doesn't sync contacts from non-iCloud accounts like your exchange and Yahoo accounts. In order to sync these with iCloud, you would need to copy them to the iCloud account and then disable contact syncing with these other accounts. (If you didn't disable contacts syncing with these accounts, you would see duplicates of these contacts on your phone -- one from the external account, and one from iCloud.) If you want to do this, do the following:
Go to Settings>iCloud, turn Contacts to Off, choose Delete from My iPhone when prompted (any iCloud contacts will still be in iCloud).
Download the app My Contacts Backup. (If you have more than 500 contacts to transfer from your other accounts you will need the “Pro” version.) Use the app to back up the remaining contacts on your phone (from the other accounts) as a vCard attachment to an email that you send to yourself. Confirm that you have received the email before proceeding to step 3.
Go to Settings>iCloud and turn Contacts back to On.
Go to Settings>Mail,Contacts,Calendars>Default Account (in the Contacts section), and confirm that this is set to iCloud.
Go to Settings>Mail,Contacts,Calendars…tap your Yahoo and your exchange account and turn off contacts syncing with these accounts. This will remove the contacts from these accounts from your phone.
Open the My Contacts Backup email and tap the attachment to import the contacts from these accounts back to your phone, and to iCloud. All your contacts should now be in iCloud and be visible on icloud.com.

Some photos are not sorted correctly by date

I just imported some photos from my friends camera who were on the same trip. However, I noticed that a couple (not all) of his photos are not sorted correctly by date in the Event. A photo from day 3 somehow comes before the photos from day 2. I checked the extended information and the dates on the photo are correct. Has anyone had this problem and know of a solution? Thanks.

It might be of some help to delete the photo cache. Please see this link - http://support.apple.com/kb/TS1314

My contacts are not updating from the iCloud. How can I actively go and retrieve them?

My contacts are not updating from the iCloud even with "push" on. How can i actively go and retrieve them?

Hello there, Lk354.
The following Knowledge Base article offers up some great recommendations for troubleshooting issues with using iCloud Contacts:
Get help using iCloud Contacts
http://support.apple.com/kb/TS3998
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Synced photos from iTunes not sorted correctly

I have around 300 pics that I took with my iphone that I moved to a local folder on PC.
I want to put those pics back on the iphone to use in a timelapse video.
I enabled Photo sync on itunes and chose that folder, and synced.
All synced OK, but these pics are not sorted correctly on the iphone.
The file names on the PC are exactly as iphone assigned them when taken, and according to date taken.
It is very important that they are sorted in ascending file name; any ideas how I can correct the sorting?
Thanks.

For those in this discussion concerned with the "Sort" order, the criteria is in the "metadata" date that changes when you adjust the photos.
The directions below apply to Lightroom
To keep the order you created you must make an adjustment to "ALL" photos at the same time such as increasing the contrast by (1) point.
First select and change the contrast in the first photo in your collection, then select the remaining photos, click "Sync" The "Metatdata" date will change on all photos selected and will then import in the prper order.
I should mention that I have renamed all photos so they have a name that is sequential but I don't know if that matters

Contacts do not sync up to iCloud with Exchange email on phone

Contacts do not sync up to iCloud with Exchange email on phone.

Contacts Troubleshooting
Contacts - Troubleshooting iCloud Contacts

I am using Iphone 3 GS since last 4 months. I have note registered it under Icloud and unfortunately i have lost my cel 2 days before. Can someone help me / tell me the ways that i can get my cel back or trace it..?

I am using Iphone 3 GS since last 4 months. I have note registered it under Icloud and unfortunately i have lost my cel 2 days before. Can someone help me / tell me the ways that i can get my cel back or trace it..?

No way to trace it if you didn't active Find my Phone on your iPhone before you lost it.
Notify your carrier and your police of the loss. Chances are you will never get your phone back.

Outlook-Updates to EXISTING Calendar and Contact entries not syncing correctly - two PC's

My setup is two PC's (one at work, one at home), one BB. Both PC's Outlook are Outlook 2003, SP3. I do not use BES. I sync my BB to both PCs.
I have experiencing specific issues where updates to existing Outlook Calendar (mtg notes) and Contact (contact notes) are not being sync'd from one PC to the next PC (via my BB device - Sprint Curve 8330 running OS v4.5.0.131). I sync PC's to my BB using BB Desktop Mgr (v4.7) and USB cable.
Here are specific details of what I am doing to duplicate the issues.
1) Calendar:
I have been away from work the past two days. In that time, I have updated two (2) calendar items at my PC at home - both items are at my work PC as well.
Item one: I moved the date from Wed to Thurs, and added a note - done from home PC
Item two: I changed the description of the meeting, and shortened appt from 3 hrs to two hrs - done from home PC
Both items sync OK with my BB
Upon coming to work this morning, neither sync'd to my work PC. I finally did the following:
Item one: I deleted from Desktop Outlook, opened in BB put a space in the meeting description saved.
Item two: Opened on BB, put a space in the meeting description saved.
Upon resyncing, here is what happened
Item one: Sync Mgr noticed conflict of deleting from PC and changed in BB. I chose to copy item to PC. This results in syncing correctly to PC
Item two: Sync'd to PC correctly.
Something is NOT right. The sync process did NOT recognize these two items that changed until I manually intervened (updating on the BB).
2) Contact:
I ran a test today where on my work PC, I added a comment into one contact's note. I successfully sync'd that contact note to my BB. However, when I sync the BB with my home PC, that note did NOT make it to the home PC.
I opened the contact (in edit mode) on my BB, inserted a space to the contact's name, erased the space, and saved the contact.
I then sync'd the BB to the home PC again. This time, success - the contact's note got sync'd to the home PC.
HELP
I have seen this sort of thing a few times before (where sync did not sync a Calendar event/mtg correctly) in the past three months or so I owned my BB - but this is the first time I decided to actually test out the fix. This is the first time I noticed with a contact (maybe b/c i do not look at my Contacts updates as closely as I do my Calendar mtgs updates)
Message Edited by Winger on 06-12-2009 10:32 AM
Message Edited by Winger on 06-12-2009 10:33 AM

Thanks for your feedback:
2 things..... I somehow had created a duplicate calendar which may have been >blocking the sync. If you have it as well, delete this calendar and try to sync.
I have several calendars in Outlook - there is the main one which contains everything, then where I have marked certain entries as 'Personal' or as 'Anniversaries' etc a separate calendar is created with those entries in them.
Also, I read somewhere that some calendar entries will corrupt the sync of the > phone. Delete all new entries since the last successful sync and enter a test >entry and try to sync the phone. To the best of my knowledge, there is no >indication that an appointment is "bad" other than the phone will stop syncing. >So perhaps after each sync, check the phone to ensure any new entries appear.
I can't possibly tell when the last successful synch occurred! I also don't want to delete entries - I need them all!
There appears to be very little advice on this problem, hopefully this will >work.
Yes, it seems that the Great God Apple isn't anywhere as smart as it thinks it is. I am really frustrated and not a little angry. This is basic stuff for any other phone, let alone a Smart Phone!
Thanks for your comments, though.

ARIAL FONT IN REPORTS(WINDOWS), NOT SHOWN CORRECTLY UNDER LINUX

Our Reports are developed under Windows (Report Builder 9.0.4.0.33 and Windows 2000/Windows XP) and generated under Linux (IAS 10.1.2.0.2 with Red Hat Advanced Server). The Report Output is a PDF, that will be downloaded by the user with WEB.SHOW_DOCUMENT. This works fine, but fonts are not shown correctly in the PDF, especially ARIAL, which is the font we use.
I have run the Fontsolution Configuration Script from Metalink, but we still have a problem.
When you look at the font.pdf, wich is the testreport from fontsolutions, some sizes and styles of Arial are printed correctly others not.
Arial 8 is ok, but Arial 10 and Arial 12 are something like Times New Roman.
Arial 12 Bolded is correct, but Arial 12 italic and Arial 12 bold italic are also not
the Arial Font.
How can we correct this problem?
Regards
Udo
These are the files changed by Fontsolution Configuration Script:
uifont.ali
# uifont.ali provided in fontsolutions.tar for developer 9.0.2
# $Header: uifont.ali@@/main/22 \
# Checked in on Tue Jan 8 15:32:42 PST 2002 by idc \
# Copyright (c) 1999, 2002 by Oracle Corporation. All Rights Reserved. \
# $
# $Revision: /main/22 $
# Copyright (c) Oracle Corporation 1994, 2002.
# All Rights Reserved.
# DESCRIPTION:
# Each line is of the form:
# <Face>.<Size>.<Style>.<Weight>.<Width>.<CharSet> = \
# <Face>.<Size>.<Style>.<Weight>.<Width>.<CharSet>
# The <Face> must be the name (string/identifier) of a font face. The
# <Style>, <Weight>, <Width>, and <CharSet> may either be a numeric
# value or a predefined identifier/string. For example, both US7ASCII
# and 1 are valid <CharSet> values, and refer to the same character set.
# The <Size> dimension must be an explicit size, in points.
# The following is a list of recognized names and their numeric
# equivalents:
# Styles Numeric value
# Plain 0
# Italic 1
# Oblique 2
# Underline 4
# Outline 8
# Shadow 16
# Inverted 32
# Overstrike 64
# Blink 128
# Weights Numeric value
# Ultralight 1
# Extralight 2
# Light 3
# Demilight 4
# Medium 5
# Demibold 6
# Bold 7
# Extrabold 8
# Ultrabold 9
# Widths Numeric value
# Ultradense 1
# Extradense 2
# Dense 3
# Semidense 4
# Normal 5
# Semiexpand 6
# Expand 7
# Extraexpand 8
# Ultraexpand 9
# Styles may be combined; you can use plus ("+") to delimit parts of a
# style. For example,
# Arial..Italic+Overstrike = Helvetica.12.Italic.Bold
# are equivalent, and either one will map any Arial that has both Italic
# and Overstrike styles to a 12-point, bold, italic Helvetica font.
# All strings are case-insensitive in mapping. Font faces are likely to
# be case-sensitive on lookup, depending on the platform and surface, so
# care should be taken with names used on the right-hand side; but they
# will be mapped case-insensitively.
# See your platform documentation for a list of all supported character
# sets, and available fonts.
# BUGS:
# o Should accept a RHS ratio (e.g., "Helv = Arial.2/3").
#===============================================================
[ Global ] # Put mappings for all surfaces here.
# Mapping from MS Windows
#Arial = helvetica
#"Courier New" = courier
#"Times New Roman" = times
#Modern = helvetica
#"MS Sans Serif" = helvetica
#"MS Serif" = times
#"Small Fonts" = helvetica
"Sadvocra" = helvetica..Oblique.Medium
"sAdC128d" = helvetica..Plain.Medium
"CarolinaBar-B39-25F2" = helvetica...Bold
#"IDAutomationSMICR" = helvetica
# Mapping from Macintosh
#"New Century Schlbk" = "new century schoolbook"
#"New York" = times
#geneva = helvetica
#===============================================================
[ Printer ] # Put mappings for all printers here.
#===============================================================
[ Printer:PostScript1 ] # Put mappings for PostScript level 1 printers here.
# Sample Kanji font mappings
...UltraLight..JEUC = "Ryumin-Light-83pv-RKSJ-H"...Light..JEUC
...UltraLight..SJIS = "Ryumin-Light-83pv-RKSJ-H"...Light..SJIS
...ExtraLight..JEUC = "Ryumin-Light-83pv-RKSJ-H"...Light..JEUC
...ExtraLight..SJIS = "Ryumin-Light-83pv-RKSJ-H"...Light..SJIS
...Light..JEUC = "Ryumin-Light-83pv-RKSJ-H"...Light..JEUC
...Light..SJIS = "Ryumin-Light-83pv-RKSJ-H"...Light..SJIS
...DemiLight..JEUC = "Ryumin-Light-83pv-RKSJ-H"...Light..JEUC
...DemiLight..SJIS = "Ryumin-Light-83pv-RKSJ-H"...Light..SJIS
.....JEUC = "GothicBBB-Medium-83pv-RKSJ-H"...Medium..JEUC
.....SJIS = "GothicBBB-Medium-83pv-RKSJ-H"...Medium..SJIS
# Mapping from MS Windows
#Roman = palatino
#Script = "itc zapf chancery"
#FixedSys = courier
#System = helvetica
# Mapping from Macintosh
#"Avant Garde" = "itc avant garde gothic"
# Mapping from Motif display
#fixed = courier
#clean = times
#lucidatypewriter = courier
#lucidabright = times
#Arial = helvetica
#"Courier New" = courier
#"Times New Roman" = times
# MICR font
#helvetica=IDAutomationSMICR
#===============================================================
[ Printer:PostScript2 ] # Put mappings for PostScript level 2 printers here.
# Sample Kanji font mappings
...UltraLight..JEUC = "Ryumin-Light-83pv-RKSJ-H"...Light..JEUC
...UltraLight..SJIS = "Ryumin-Light-83pv-RKSJ-H"...Light..SJIS
...ExtraLight..JEUC = "Ryumin-Light-83pv-RKSJ-H"...Light..JEUC
...ExtraLight..SJIS = "Ryumin-Light-83pv-RKSJ-H"...Light..SJIS
...Light..JEUC = "Ryumin-Light-83pv-RKSJ-H"...Light..JEUC
...Light..SJIS = "Ryumin-Light-83pv-RKSJ-H"...Light..SJIS
...DemiLight..JEUC = "Ryumin-Light-83pv-RKSJ-H"...Light..JEUC
...DemiLight..SJIS = "Ryumin-Light-83pv-RKSJ-H"...Light..SJIS
.....JEUC = "GothicBBB-Medium-83pv-RKSJ-H"...Medium..JEUC
.....SJIS = "GothicBBB-Medium-83pv-RKSJ-H"...Medium..SJIS
# Mapping from MS Windows
#Roman = palatino
#Script = "itc zapf chancery"
#FixedSys = courier
#System = helvetica
# Mapping from Macintosh
#"Avant Garde" = "itc avant garde gothic"
# Mapping from Motif display
#fixed = courier
#clean = times
#lucidatypewriter = courier
#lucidabright = times
#===============================================================
[ Printer:PCL5 ] # Put mappings for PCL 5 printers here.
helvetica = univers
times = "cg times"
clean = "antique olv"
fixed = courier
lucida = univers
lucidabright = "cg times"
lucidatypewriter = courier
"new century schoolbook" = univers
terminal = "line printer"
#===============================================================
[ Display ] # Put mappings for all display surfaces here.
#===============================================================
[ Display:Motif ] # Put mappings for Motif displays here
# Fix for bug no 778937 DO NOT MOVE!
Roman.....sjis = lucida.....jeuc
Script.....sjis = lucidabright.....jeuc
FixedSys.....sjis = fixed.....jeuc
System.....sjis = lucida.....jeuc
.....sjis = .....jeuc
# Mapping from MS Windows
Roman = lucida
Script = lucidabright
FixedSys = fixed
System = lucida
# Mapping from Macintosh
"Avant Garde" = helvetica
"Bookman" = times
#===============================================================
[ Display:CM ] # Put mappings for all CM displays here.
# These are DEC-specific, and may need localization
*..Blink = Blinking
*..Inverted+Underline.Bold = ReverseBoldUnderline
*..Inverted+Underline. = UnderlineReverse
*..Underline.Bold = UnderlineBold
*..Inverted.Bold = ReverseBold
*...Bold = Bold
*..Underline = Underline
*..Inverted = Reverse
* = Plain # The font of last resort
# Oracle Report PDF sections
# Three new sections have been added:
# [ PDF ] - Used for font aliasing and Multibyte language support
# [ PDF:Embed ] - Used for Type 1 font embedding
# [ PDF:Subset ] - Used for True Type Font subsetting
[ PDF ]
# This example shows how to rename helvetica font to Courier font
# helvetica = Courier
# You can Alias specific styles of font as below
# helvetica.12..Bold.. = Courier.14....
# "Lucida Bright".12..Bold = "New Century Schoolbook"
# Support for Far Eastern Languages:
# PDF section can be additionally used to enable Multibyte language support
# built into Reports. To use this feature with Adobe (r) Acrobat (c), you
# need to install the Asian font pack available online at the Adobe web site.
# .....SJIS = "HeiseiKakuGo-W5-Acro"
# A Japanese report run with Shift-JIS character set is replaced to
# HeiseiKakuGo-W5-Acro CID font.
arial = Arial
"arial" =Arial
"arial narrow" = "Arial Narrow"
"courier new" = "Courier New"
tahoma = Tahoma
"microsoft sans serif" = "Microsoft Sans Serif"
"ms sans serif" = "MS Sans Serif"
"times new roman" = "Times New Roman"
[ PDF:Embed ]
# This example shows how to embed Type 1 helvetica font into the PDF file:
# helvetica = "helvetica.afm helvetica.pfa"
# You need to specify the .afm file before the .pfa file.
# The font files must exist in one of the folders specified in REPORTS_PATH.
[ PDF:Subset ]
# This example shows how to subset Arial True Type font into the PDF file:
# helvetica = "Arial.ttf"
# The True Type font files must exist in any one of the folders specified in
# REPORTS_PATH.
helvetica..Oblique.Medium = "Sadvocra.ttf"
helvetica..Plain.Medium = "Sadc128d.ttf"
helvetica...Bold = "CarolinaBar-B39-25F2-Normal.ttf"
# NOTES ON PRECEDENCE OF PDF SECTIONS:
# If you have entries for a same font in many PDF sections, then Font
# Aliasing entry will take precedence over Font Embedding entry. Entries
# in Font Embedding will take precedence over the entries in Font Subsetting
# section.
# Generic entries for a font must follow more specific entries for the same
# font. For instance, if you want to subset helvetica Plain, helvetica Bold,
# helvetica Italic and helvetica Bold-Italic fonts, your entries must be:
# [ PDF:Subset ]
# helvetica..Italic.Bold.. = "Arialbi.ttf"
# helvetica...Bold.. = "Arialb.ttf"
# helvetica..Italic... = "Ariali.ttf"
# helvetica..... = "Arial.ttf"
# If helvetica..... entry appears in the top of the list, all the styles of
# helvetica font in the layout will be subset as helvetica Plain font.
uiprint.txt
# This is the printer configuration file.
# The format for entries in this file is:
# <OSName>:<Type>:<Version>:<Long Name>:<Description File>:
# The first field is the name of the printer. It is the name you give
# to lpq.
# The second field is the type of driver to be used for the printer.
# Currently, "PostScript" and "ASCII" are the only types of driver for
# printers supported for now. But in future we may be supporting
# drivers for other printer types.
# The third field is the version of the type of printer driver. It's 1
# or 2 for all PostScript printers; or 1 for ASCII printers.
# The fourth field is a long description of the printer. This will be
# presented to the user in the "Choose Printer" dialog window.
# The fifth field is the printer description file to be used. For
# PostScript printers it is the PPD file of the printer. (This field is
# currently unused for ASCII printers.)
# You can use default.ppd for the description file if you don't have a
# PPD file for the printer, but it's best to use the correct PPD file
# for the printer.
# You must fill in at least the first two fields (printer name and
# type). If the version is empty, it defaults to "1"; if the long name
# or description are empty, they will default to empty strings. A
# version of 1 or an empty long name is fine, but, for PostScript
# printers, you must fill in the description file name.
# You don't have to update this file to use any printer. The printer
# chooser interface let's you select a printer and driver at run time,
# as well as associate a printer description file to the printer. You
# should list all printers accessible to users here, however, to
# simplify selecting a printer.
# The first entry in this file will be used as the default printer, if
# no printer was selected in the operating system. (For Unix, the
# following environment variables will be used in turn to get the
# default printer's name:
# TK2_PRINTER
# ORACLE_PRINTER
# PRINTER
# For other platforms, see the Installation and User's Guide for your OS
# for information on setting the default printer.)
# WARNING: Do not define multiple entries for the same printer by the
# same name. Selecting a printer with multiple entries will always result
# in the first entry being selected. Instead, see if your OS allows you
# to create an alias for the printer, and use an alias for the second type.
# The following are examples; replace them with printers accessible from
# this machine.
# hqunx15:PostScript:1:The really slow printer on 12th floor:dcln03r1.ppd:
# hqdev2_pos:PostScript:1:The fast ScriptPrinter in 1281:dclps321.ppd:
# hqunx106:ASCII:1:LNO printer in the 11th floor printer room:none:
# hqdev9:PostScript:1:Bogus printer for Reports ASCII QA:default.ppd:
# hqunx121:PostScript:1:APO printer in 500OP for NLS QA:ok800lt1.ppd:
# --- Note that the following two printers are aliases for the same
# --- physical printer, with different names for different types:
# tk2hp4m:PCL:5:HP printer in 771 for testing PCL:ui4.hpd:
# tk2bw1ps:PostScript:1:HP printer in 771 for testing PS:hp4mp6_1.ppd:
# Not A Printer:ASCII:1:Configure your uiprint.txt file:none:
fontprinter:PostScript:1:printer for fonting fixes:default.ppd:
datap462.ppd
*PPD-Adobe: "4.0"
*% Adobe Systems PostScript(R) Printer Description File
*% Copyright 1987-1992 Adobe Systems Incorporated.
*% All Rights Reserved.
*% Permission is granted for redistribution of this file as
*% long as this copyright notice is intact and the contents
*% of the file is not altered in any way from its original form.
*% End of Copyright statement
*FormatVersion: "4.0"
*FileVersion: "3.1"
*PCFileName: "DATAP462.PPD"
*LanguageVersion: English
*Product: "(Dataproducts LZR 2665)"
*PSVersion: "(46.2) 1"
*ModelName: "Dataproducts LZR-2665"
*NickName: "Dataproducts LZR-2665 v46.2"
*% ==== Options and Constraints =====
*OpenGroup: InstallableOptions/Options Installed
OpenUI Option1/Optional Lower Tray: Boolean
*DefaultOption1: False
*Option1 True/Installed: ""
*Option1 False/Not Installed: ""
CloseUI: Option1
*CloseGroup: InstallableOptions
UIConstraints: Option1 False *InputSlot Lower
*% General Information and Defaults ===============
*ColorDevice: False
*DefaultColorSpace: Gray
*FreeVM: "178744"
*LanguageLevel: "1"
*VariablePaperSize: False
*FileSystem: False
*Throughput: "26"
*Password: "0"
*ExitServer: "
count 0 eq { % is the password on the stack?
true
dup % potential password
statusdict /checkpassword get exec not
} ifelse
{ % if no password or not valid
(WARNING : Cannot perform the exitserver command.) =
(Password supplied is not valid.) =
(Please contact the author of this software.) = flush
quit
} if
serverdict /exitserver get exec
*End
*Reset: "
count 0 eq { % is the password on the stack?
true
dup % potential password
statusdict /checkpassword get exec not
} ifelse
{ % if no password or not valid
(WARNING : Cannot reset printer.) =
(Password supplied is not valid.) =
(Please contact the author of this software.) = flush
quit
} if
serverdict /exitserver get exec
systemdict /quit get exec
(WARNING : Printer Reset Failed.) = flush
*End
*DefaultResolution: 300dpi
*?Resolution: "
save
initgraphics
0 0 moveto currentpoint matrix defaultmatrix transform
0 72 lineto currentpoint matrix defaultmatrix transform
3 -1 roll sub dup mul
3 1 roll exch sub dup mul
add sqrt round cvi
( ) cvs print (dpi) = flush
restore
*End
*% Halftone Information ===============
*ScreenFreq: "50.0"
*ScreenAngle: "54.0"
*DefaultScreenProc: Dot
*ScreenProc Dot: " {dup mul exch dup mul add sqrt 1 exch sub } "
*ScreenProc Line: "{ pop }"
*ScreenProc Ellipse: "
{ dup 5 mul 8 div mul exch dup mul exch add sqrt 1 exch sub }"
*End
*DefaultTransfer: Null
*Transfer Null: "{ }"
*Transfer Null.Inverse: "{ 1 exch sub }"
*% Paper Handling ===================
*% Use these entries to set paper size most of the time, unless there is
*% specific reason to use PageRegion.
*OpenUI *PageSize: PickOne
*OrderDependency: 30 AnySetup *PageSize
*DefaultPageSize: Letter
*PageSize Letter: "statusdict /lettertray get exec letterR"
*PageSize Letter.Transverse: "statusdict /lettertray get exec letter"
*PageSize Legal: "statusdict /legaltray get exec"
*PageSize Ledger: "statusdict /ledgertray get exec"
*PageSize Statement: "statusdict /statementtray get exec"
*PageSize Tabloid: "statusdict /11x17tray get exec"
*PageSize A3: "statusdict /a3tray get exec"
*PageSize A4: "statusdict /a4tray get exec a4R"
*PageSize A4.Transverse: "statusdict /a4tray get exec a4"
*PageSize A5: "statusdict /a5tray get exec"
*PageSize B4: "statusdict /b4tray get exec"
*PageSize B5: "statusdict /b5tray get exec b5R"
*PageSize B5.Transverse: "statusdict /b5tray get exec b5"
*CloseUI: *PageSize
*% These entries will set up the frame buffer. Usually used with manual feed.
*OpenUI *PageRegion: PickOne
*OrderDependency: 40 AnySetup *PageRegion
*DefaultPageRegion: Letter
*PageRegion Letter: "letterR"
*PageRegion Letter.Transverse: "letter"
*PageRegion Legal: "legal"
*PageRegion Ledger: "ledger"
*PageRegion Tabloid: "11x17"
*PageRegion A3: "a3"
*PageRegion A4: "a4R"
*PageRegion A4.Transverse: "a4"
*PageRegion A5: "a5"
*PageRegion B4: "b4"
*PageRegion B5: "b5R"
*PageRegion B5.Transverse: "b5"
*PageRegion Statement: "statement"
*CloseUI: *PageRegion
*% The following entries provide information about specific paper keywords.
*DefaultImageableArea: Letter
*ImageableArea Letter: "20 16 591 775 "
*ImageableArea Letter.Transverse: "18 19 593 773 "
*ImageableArea Legal: "18 19 593 990 "
*ImageableArea Ledger: "18 16 1205 775 "
*ImageableArea Tabloid: "16 19 775 1206 "
*ImageableArea A3: "18 21 823 1170 "
*ImageableArea A4: "18 18 576 823 "
*ImageableArea A4.Transverse: "18 19 577 823 "
*ImageableArea A5: "18 19 401 577 "
*ImageableArea B4: "19 15 709 1017 "
*ImageableArea B5: "20 19 495 709 "
*ImageableArea B5.Transverse: "20 19 495 709 "
*ImageableArea Statement: "22 19 374 594 "
*?ImageableArea: "
save
/cvp {( ) cvs print ( ) print } bind def
/upperright {10000 mul floor 10000 div} bind def
/lowerleft {10000 mul ceiling 10000 div} bind def
newpath clippath pathbbox
4 -2 roll exch 2 {lowerleft cvp} repeat
exch 2 {upperright cvp} repeat flush
restore
*End
*% These provide the physical dimensions of the paper (by keyword)
*DefaultPaperDimension: Letter
*PaperDimension Letter: "612 792"
*PaperDimension Letter.Transverse: "612 792"
*PaperDimension Legal: "612 1008"
*PaperDimension Ledger: "1224 792"
*PaperDimension Tabloid: "792 1224"
*PaperDimension A3: "842 1191"
*PaperDimension A4: "595 842"
*PaperDimension A4.Transverse: "595 842"
*PaperDimension A5: "420 595"
*PaperDimension B4: "729 1032"
*PaperDimension B5: "516 729"
*PaperDimension B5.Transverse: "516 729"
*PaperDimension Statement: "396 612"
*RequiresPageRegion All: True
*OpenUI *InputSlot: PickOne
*OrderDependency: 20 AnySetup *InputSlot
*DefaultInputSlot: Upper
*InputSlot Upper: "0 statusdict /setpapertray get exec"
*InputSlot Lower: "1 statusdict /setpapertray get exec"
*?InputSlot: "
save
[ (Upper) (Lower) ] statusdict /papertray get exec
(get exec) stopped ( pop pop (Unknown)} if = flush
restore
*End
*CloseUI: *InputSlot
*OpenUI *ManualFeed: Boolean
*OrderDependency: 20 AnySetup *ManualFeed
*DefaultManualFeed: False
*ManualFeed True: "statusdict /manualfeed true put"
*ManualFeed False: "statusdict /manualfeed false put"
*?ManualFeed: "
save
statusdict /manualfeed get {(True)}{(False)}ifelse = flush
restore
*End
*CloseUI: *ManualFeed
*DefaultOutputOrder: Reverse
*% Font Information =====================
*% This datap462.ppd is provided by fontsolutions.tar
*DefaultFont: Courier
*Font ArialMT: Standard "(001.004)" Standard ROM
*Font Arial-ItalicMT: Standard "(001.004)" Standard ROM
*Font Arial-BoldMT: Standard "(001.004)" Standard ROM
*Font Arial-BoldItalicMT: Standard "(001.004)" Standard ROM
*Font ArialNarrow: Standard "(001.004)" Standard ROM
*Font ArialNarrow-Italic: Standard "(001.004)" Standard ROM
*Font ArialNarrow-Bold: Standard "(001.004)" Standard ROM
*Font ArialNarrow-BoldItalic: Standard "(001.004)" Standard ROM
*Font CourierNewMT: Standard "(001.004)" Standard ROM
*Font CourierNew-ItalicMT: Standard "(001.004)" Standard ROM
*Font CourierNew-BoldMT: Standard "(001.004)" Standard ROM
*Font CourierNew-BoldItalicMT: Standard "(001.004)" Standard ROM
*Font Courier: Standard "(001.004)" Standard ROM
*Font Courier-Bold: Standard "(001.001)" Standard ROM
*Font Courier-BoldOblique: Standard "(001.001)" Standard ROM
*Font Courier-Oblique: Standard "(001.001)" Standard ROM
*Font Helvetica: Standard "(001.001)" Standard ROM
*Font Helvetica-Bold: Standard "(001.001)" Standard ROM
*Font Helvetica-BoldOblique: Standard "(001.001)" Standard ROM
*Font Helvetica-Oblique: Standard "(001.001)" Standard ROM
*Font IDAutomationSMICR: Standard "(001.001)" Standard ROM
*Font Symbol: Special "(001.001)" Special ROM
*Font Tahoma: Standard "(001.001)" Standard ROM
*Font Tahoma-Bold: Standard "(001.001)" Standard ROM
*Font Times-Bold: Standard "(001.001)" Standard ROM
*Font Times-BoldItalic: Standard "(001.001)" Standard ROM
*Font Times-Italic: Standard "(001.001)" Standard ROM
*Font Times-Roman: Standard "(001.001)" Standard ROM
*Font TimesNewRomanMT: Standard "(001.001)" Standard ROM
*Font TimesNewRoman-BoldMT: Standard "(001.001)" Standard ROM
*Font TimesNewRoman-BoldItalicMT: Standard "(001.001)" Standard ROM
*Font TimesNewRoman-ItalicMT: Standard "(001.001)" Standard ROM
*?FontQuery: "
save
/str 100 string dup 0 (fonts/) putinterval def
count 1 gt
exch dup str 6 94 getinterval cvs
(/) print print (:) print
FontDirectory exch known
{(Yes)}{(No)} ifelse =
{exit} ifelse
}bind loop
(*) = flush
restore
*End
*?FontList: "
FontDirectory { pop == } bind forall flush
(*) = flush
*End
*% Printer Messages (verbatim from printer):
*Message: "%%[ exitserver: permanent state may be changed ]%%"
*Message: "%%[ Flushing: rest of job (to end-of-file) will be ignored ]%%"
*Message: "\FontName\ not found, using Courier"
*% Status (format: %%[ status: <one of these> ]%% )
*Status: "idle"
*Status: "busy"
*Status: "waiting"
*Status: "printing"
*Status: "warming up"
*Status: "PrinterError: BD check"
*Status: "PrinterError: Paper jam"
*Status: "PrinterError: Replace toner bag"
*Status: "PrinterError: Warming up"
*Status: "PrinterError: Timing error"
*Status: "PrinterError: Fuser check"
*Status: "PrinterError: Cover opened"
*Status: "PrinterError: Toner empty"
*Status: "PrinterError: Empty & reset output bin(s)"
*Status: "PrinterError: Sorter or jogger error"
*Status: "PrinterError: Scanner check"
*% Input Sources (format: %%[ status: <stat>; source: <one of these> ]%% )
*Source: "serial9"
*Source: "serial25"
*Source: "AppleTalk"
*Source: "Centronics"
*% Printer Error (format: %%[ PrinterError: <one of these> ]%%)
*PrinterError: "BD check"
*PrinterError: "Paper jam"
*PrinterError: "Replace toner bag"
*PrinterError: "Warming up"
*PrinterError: "Timing error"
*PrinterError: "Fuser check"
*PrinterError: "Cover opened"
*PrinterError: "Toner empty"
*PrinterError: "Empty & reset output bin(s)"
*PrinterError: "Sorter or jogger error"
*PrinterError: "Scanner check"
*%DeviceAdjustMatrix: "[1 0 0 1 0 0]"
*% Color Separation Information =====================
*DefaultColorSep: ProcessBlack.60lpi.300dpi/60 lpi / 300 dpi
*InkName: ProcessBlack/Process Black
*InkName: CustomColor/Custom Color
*InkName: ProcessCyan/Process Cyan
*InkName: ProcessMagenta/Process Magenta
*InkName: ProcessYellow/Process Yellow
*% For 60 lpi / 300 dpi =====================================================
*ColorSepScreenAngle ProcessBlack.60lpi.300dpi/60 lpi / 300 dpi: "45"
*ColorSepScreenAngle CustomColor.60lpi.300dpi/60 lpi / 300 dpi: "45"
*ColorSepScreenAngle ProcessCyan.60lpi.300dpi/60 lpi / 300 dpi: "15"
*ColorSepScreenAngle ProcessMagenta.60lpi.300dpi/60 lpi / 300 dpi: "75"
*ColorSepScreenAngle ProcessYellow.60lpi.300dpi/60 lpi / 300 dpi: "0"
*ColorSepScreenFreq ProcessBlack.60lpi.300dpi/60 lpi / 300 dpi: "60"
*ColorSepScreenFreq CustomColor.60lpi.300dpi/60 lpi / 300 dpi: "60"
*ColorSepScreenFreq ProcessCyan.60lpi.300dpi/60 lpi / 300 dpi: "60"
*ColorSepScreenFreq ProcessMagenta.60lpi.300dpi/60 lpi / 300 dpi: "60"
*ColorSepScreenFreq ProcessYellow.60lpi.300dpi/60 lpi / 300 dpi: "60"
*% For 53 lpi / 300 dpi =====================================================
*ColorSepScreenAngle ProcessBlack.53lpi.300dpi/53 lpi / 300 dpi: "45.0"
*ColorSepScreenAngle CustomColor.53lpi.300dpi/53 lpi / 300 dpi: "45.0"
*ColorSepScreenAngle ProcessCyan.53lpi.300dpi/53 lpi / 300 dpi: "71.5651"
*ColorSepScreenAngle ProcessMagenta.53lpi.300dpi/53 lpi / 300 dpi: "18.4349"
*ColorSepScreenAngle ProcessYellow.53lpi.300dpi/53 lpi / 300 dpi: "0.0"
*ColorSepScreenFreq ProcessBlack.53lpi.300dpi/53 lpi / 300 dpi: "53.033"
*ColorSepScreenFreq CustomColor.53lpi.300dpi/53 lpi / 300 dpi: "53.033"
*ColorSepScreenFreq ProcessCyan.53lpi.300dpi/53 lpi / 300 dpi: "47.4342"
*ColorSepScreenFreq ProcessMagenta.53lpi.300dpi/53 lpi / 300 dpi: "47.4342"
*ColorSepScreenFreq ProcessYellow.53lpi.300dpi/53 lpi / 300 dpi: "50.0"
*% For "Dataproducts LZR 2665" version 46.2
*% Produced by "GETapd.ps" version 2.0 edit 47
*% Converted to meet 4.0 specification
*% Last Edit Date: Sep 15 1992
*% The byte count of this file should be exactly 011228 or 011572
*% depending on the filesystem it resides in.
*% end of PPD file for Dataproducts LZR 2665

If you want to make platform independent use of fonts, you have to use the family, such as sans serif.
Arial is owned by monotype (http://monotype.com/). You have to contact them if you wish to redistribute it with your application. They also might have a suitable version that renders nicely under linux.
Pete

Outlook Contacts do not sort correctly under iCloud

Similar Messages

Maybe you are looking for