Outlook Contacts sync Run Time Error

Desktop 4.7.0.25 returns the following error when trying to sync Contacts in Outlook 2003:
RUN TIME ERROR: "The Application's Section is not File-Based."
Any fixes here?
Solved!
Go to Solution.

Hi Mikim and welcome to the Blackberry Forums
Here is the link to the procedure to solve your problem
http://www.blackberry.com/btsc/search.do?cmd=displayKC&docType=kc&externalId=KB15303&sliceId=1&docTy...
Thanks
If I help you with any inquire, thank you for click kudos in my post.
If your issue has been solved, please mark the post was solved.

Similar Messages

TS1347 My Outlook Contacts/calendars (running on an iMac) never sync properly with my iPhone, and now on the last sync 90% of the contact information on my iPhone has been deleted. Any ideas?

My Outlook Contacts/calendars (running on an iMac) never sync properly with my iPhone, and now on the last sync 90% of the contact information on my iPhone has been deleted. Any ideas?

Are these the instructions you followed:
http://support.apple.com/kb/ht1670

Run time error

Dear All,
During the transaction /n/sapapo/ccr (Reconsilation of transaction data) in client SCP 950, system displays the run time error which are attached herewith.
This is the activity a used to execute regularly (Daily) and first time i recieved this message - -
Runtime Errors         ASSERTION_FAILED
Date and Time          13.07.2007 10:13:37
ShrtText
The ASSERT condition has been violated.
What happened?
In the current application program, the system recognized a situation
    involving the ASSERT statement that should not occur. A runtime error
    occurred, either because there was no activation ID entered or because
    the ID of the activation mode used was set to "Cancel.
What can you do?
Print out the error message (using the "Print" function)
    and make a note of the actions and input that caused the
    error.
To resolve the problem, contact your SAP system administrator.
    You can use transaction ST22 (ABAP Dump Analysis) to view and administer
     termination messages, especially those beyond their normal deletion
    date.
is especially useful if you want to keep a particular message.
Error analysis
The following activation ID was used: "No checkpoint group specified"
If the FIELDS addition was used with this ASSERT statement, the content
    of the first 8 fields is as follows:
    " (not used) "
" (not used) "
" (not used) "
" (not used) "
" (not used) "
" (not used) "
" (not used) "
" (not used) "
How to correct the error
Probably the only way to eliminate the error is to correct the program.
You may able to find an interim solution to the problem
    in the SAP note system. If you have access to the note system yourself,
    use the following search criteria:
"ASSERTION_FAILED" C
"/SAPAPO/SAPLTIMESTAMP" or "/SAPAPO/LTIMESTAMPU08"
    "/SAPAPO/TIMESTAMP_DIFFERENCE"
    If you cannot solve the problem yourself and you wish to send
    an error message to SAP, include the following documents:
1. A printout of the problem description (short dump)
       To obtain this, select in the current display "System->List->
       Save->Local File (unconverted)".
2. A suitable printout of the system log
       To obtain this, call the system log through transaction SM21.
       Limit the time interval to 10 minutes before and 5 minutes
       after the short dump. In the display, then select the function
       "System->List->Save->Local File (unconverted)".
3. If the programs are your own programs or modified SAP programs,
       supply the source code.
       To do this, select the Editor function "Further Utilities->
       Upload/Download->Download".
4. Details regarding the conditions under which the error occurred
       or which actions and input led to the error.
System environment
SAP Release.............. "640"
Application server....... "scmprd"
    Network address.......... "172.16.10.47"
    Operating system......... "AIX"
    Release.................. "5.3"
    Hardware type............ "0002BFAAD700"
    Character length......... 16 Bits
    Pointer length........... 64 Bits
    Work process number...... 0
    Short dump setting....... "full"
Database server.......... "scmprd"
    Database type............ "ORACLE"
    Database name............ "SCP"
    Database owner........... "SAPSCP"
Character set............ "C"
SAP kernel............... "640"
    Created on............... "Jan 18 2006 20:47:39"
    Created in............... "AIX 1 5 00538A4A4C00"
    Database version......... "OCI_920 "
Patch level.............. "109"
    Patch text............... " "
Supported environment....
    Database................. "ORACLE 9.2.0.., ORACLE 10.1.0.., ORACLE
     10.2.0.."
SAP database version..... "640"
    Operating system......... "AIX 1 5, AIX 2 5, AIX 3 5"
Memory usage.............
    Roll..................... 16192
    EM....................... 196923232
    Heap..................... 0
    Page..................... 98304
    MM Used.................. 186636840
    MM Free.................. 1895288
    SAP Release.............. "640"
User and Transaction
Client.............. 950
    User................ "SCMATP"
    Language key........ "E"
    Transaction......... "/SAPAPO/CCR "
    Program............. "/SAPAPO/SAPLTIMESTAMP"
    Screen.............. "SAPMSSY0 1000"
    Screen line......... 6
Information on where terminated
    The termination occurred in the ABAP program "/SAPAPO/SAPLTIMESTAMP" in
     "/SAPAPO/TIMESTAMP_DIFFERENCE".
    The main program was "/SAPAPO/CIF_DELTAREPORT3 ".
The termination occurred in line 61 of the source code of the (Include)
     program "/SAPAPO/LTIMESTAMPU08"
    of the source code of program "/SAPAPO/LTIMESTAMPU08" (when calling the editor
     610).
Source Code Extract
Line SourceCde
31     lv_time_int_low      TYPE i,
   32     lv_timediff_int      TYPE i,
   33     lv_datediff_int      TYPE i,
   34     lv_time              TYPE t,
   35     ls_time              TYPE tstr_timestr.
   36
37 * check timestamp parameter
   38 * ASSERT NOT iv_timestamp_high IS INITIAL.
   39 * ASSERT NOT iv_timestamp_low IS INITIAL.
   40 * ASSERT iv_timestamp_low <= iv_timestamp_high.
   41   IF iv_timestamp_high IS INITIAL
   42   OR iv_timestamp_low IS INITIAL.
   43     RAISE invalid_parameter.
   44   ENDIF.
45   IF iv_timestamp_high < iv_timestamp_low.
   46     RAISE invalid_parameter.
   47   ENDIF.
48
49 * prepare timestamps
   50 * .. split into date and time integers
   51   ls_timestamp_high = iv_timestamp_high.
   52   lv_date_int_high = ls_timestamp_high-date.
   53   lv_time_int_high = ls_timestamp_high-time.
   54   ls_timestamp_low = iv_timestamp_low.
   55   lv_date_int_low   = ls_timestamp_low-date.
   56   lv_time_int_low   = ls_timestamp_low-time.
   57
58 * .. calc date diff
   59 * .. check against max. allowed integer difference
   60   lv_datediff_int = lv_date_int_high - lv_date_int_low.
>>>>>   ASSERT lv_datediff_int <= lc_datediff_intmax.
   62
63 * calc time diff
64   lv_timediff_int = lv_time_int_high - lv_time_int_low.
   65   IF lv_timediff_int < 0.
   66     ADD 86400 TO lv_timediff_int.
   67     SUBTRACT 1 FROM lv_datediff_int.
   68   ENDIF.
69
70 * calc total duration
   71   lv_duration_int = lv_datediff_int * 86400 + lv_timediff_int.
   72   lv_time = lv_timediff_int.
   73   ls_time = lv_time.
   74   ls_duration-hours   = lv_duration_int DIV 3600.
   75   ls_duration-minutes = ls_time-minute.
   76   ls_duration-seconds = ls_time-second.
   77
78   ev_duration_packed = ls_duration.
   79   ev_duration_integer = lv_duration_int.
   80 ENDFUNCTION.
Contents of system fields
Name     Val.
SY-SUBRC 0
SY-INDEX 0
SY-TABIX 1
SY-DBCNT 1
SY-FDPOS 6
SY-LSIND 0
SY-PAGNO 0
SY-LINNO 1
SY-COLNO 1
SY-PFKEY
SY-UCOMM
SY-TITLE CIF - Comparison/Reconciliation of Transaction Data
SY-MSGTY
SY-MSGID
SY-MSGNO 000
SY-MSGV1
SY-MSGV2
SY-MSGV3
SY-MSGV4
Active Calls/Events
No.   Ty.          Program                             Include                             Line
      Name
5 FUNCTION     /SAPAPO/SAPLTIMESTAMP               /SAPAPO/LTIMESTAMPU08                  61
      /SAPAPO/TIMESTAMP_DIFFERENCE
    4 FORM         /SAPAPO/SAPLCIF_DELTA3              /SAPAPO/LCIF_DELTA3F17                349
      COMPARE_ORDER_HEADER
    3 FUNCTION     /SAPAPO/SAPLCIF_DELTA3              /SAPAPO/LCIF_DELTA3U03                125
      /SAPAPO/CIF_DELTA3_COMP_ORDER
    2 FUNCTION     /SAPAPO/SAPLCIF_DELTA3              /SAPAPO/LCIF_DELTA3U01                871
      /SAPAPO/CIF_DELTA3_COMP
    1 EVENT        /SAPAPO/CIF_DELTAREPORT3            /SAPAPO/CIF_DELTAREPORT3              189
      START-OF-SELECTION
Chosen variables
Name
Val.
No.       5 Ty.          FUNCTION
Name /SAPAPO/TIMESTAMP_DIFFERENCE
IV_TIMESTAMP_HIGH
#q1###
02073899
2001125C
IV_TIMESTAMP_LOW
##q!####
00720899
2011125C
EV_DURATION_INTEGER
0
0000
0000
EV_DURATION_PACKED
000000
00000C
SYST-REPID
/SAPAPO/SAPLTIMESTAMP
    0000000000000000000000000000000000000000
    0000000000000000000000000000000000000000
    2545454254545444554452222222222222222222
    F31010FF310C49D5341D00000000000000000000
%_SPACE
0
0
2
0
LS_TIMESTAMP_HIGH
22000713182959
00000000000000
00000000000000
33333333333333
22000713182959
LV_DATE_INT_HIGH
803363
0042
0C23
LS_TIMESTAMP_HIGH-DATE
22000713
00000000
00000000
33333333
22000713
LV_TIME_INT_HIGH
66599
0002
0147
LS_TIMESTAMP_HIGH-TIME
182959
000000
000000
333333
182959
LS_TIMESTAMP_LOW
20071210182959
00000000000000
00000000000000
33333333333333
20071210182959
LV_DATE_INT_LOW
733021
0025
0BFD
LS_TIMESTAMP_LOW-DATE
20071210
00000000
00000000
33333333
20071210
LV_TIME_INT_LOW
66599
0002
0147
LS_TIMESTAMP_LOW-TIME
182959
000000
000000
333333
182959
SY-UNAME
SCMATP
000000000000
000000000000
544455222222
33D140000000
SCREEN-INPUT
1
0
0
3
1
LV_DATEDIFF_INT
70342
001C
0126
LV_TIMEDIFF_INT
0
0000
0000
SYST
#######################################Ō###############################################䵘 C#Ԁ##
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000004000000
    000000000000000000000000000000000000000100000000000000000000000000000000000000000000000D000500
    0000000000000000000000000000000800000004000000000000000000000000000000000000010900000005240000
    0000010200000000000001060100010C0000000C0000000002000000000000000000000000000B000001000803000C
SY-REPID
/SAPAPO/SAPLTIMESTAMP
    0000000000000000000000000000000000000000
    0000000000000000000000000000000000000000
    2545454254545444554452222222222222222222
    F31010FF310C49D5341D00000000000000000000
%_DUMMY$$
0000
0000
2222
0000
No.       4 Ty.          FORM
Name COMPARE_ORDER_HEADER
SYST-REPID
/SAPAPO/SAPLCIF_DELTA3
    0000000000000000000000000000000000000000
    0000000000000000000000000000000000000000
    2545454254544445444543222222222222222222
    F31010FF310C396F45C413000000000000000000
GC_APPEND_MODE
3
0
0
3
3
LS_FIELDS_TO_COMPARE-DUEDATE
    X
0
0
5
8
SYST
#######################################Ō###############################################䵘 C#Ԁ##
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000004000000
    000000000000000000000000000000000000000100000000000000000000000000000000000000000000000D000500
    0000000000000000000000000000000800000004000000000000000000000000000000000000010900000005240000
    0000010200000000000001060100010C0000000C0000000002000000000000000000000000000B000001000803000C
LS_APO_ORDER-ORDTYPE
5
0
0
3
5
GC_PLANNED_ORDER
5
0
0
3
5
LS_R3_ORDER-STATUSCNF
0
0
2
0
GC_ORDER_STATUS_NO_CONF
1
0
0
3
1
LS_APO_ORDER-STATUSCNF
0
0
2
0
GC_PRED_OUT_DEL
A
0
0
4
1
GC_TND_DELETE
CN
00
00
44
3E

Dear Sajit,
Go through the following OSS Notes:
<a href="https://websmp110.sap-ag.de/form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=901957&_NLANG=E">901957</a>, <a href="https://websmp110.sap-ag.de/form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=1036880&_NLANG=E">1036880</a>, <a href="https://websmp110.sap-ag.de/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=1067414&_NLANG=E">1067414</a>
Regards,
Naveen.

Run time error while testing a service through transaction SICF/SOAMANAGER

Hi all,
We created a service for publishing the function module in web services through WSDL. When we try to test the service using SICF transaction / SOAMANAGER transaction, we get a run time error.
We are not sure whether any other settings or steps required for testing the web services..
Could you please let us know which steps/configurations we are missing?
Details of the run time error.
Service cannot be reached
What has happened?
URL http://in.ap1.sy.com:8000/wsnavigator call was terminated because the corresponding service is not available.
Note
The termination occurred in system ECC with error code 404 and for the reason Not found.
The selected virtual host was 0 .
What can I do?
Please select a valid URL.
If you do not yet have a user ID, contact your system administrator.
ErrorCode:ICF-NF-http-c:000-u:SAPSYS-l:J-i:INSISCSAPIDES_ECC_00-v:0-s:404-r:Notfound
HTTP 404 - Not found
Your SAP Internet Communication Framework Team
Thanks
Siva

Please ask you Basis admin to perform the following.
1) Check wether the Java Stack ( Portal, BI system etc) is avaliable in your landscape.
2) Execute tcode SOAMANAGER in ECC system. This will take you to a new browser where you have to login with your SAP username and password. Under SOA MANAGEMENT you can see Technical Configuration tab>click on System Global Settings>and select Access Information J2EE server. Here provide the hostname and the port number. Save the entries.
3)Execute tcode SMICM>Goto>Services. Here you can check for the HTTP Service Name/Port number
4) Activate the required services from tcode SICF
Thanks,
Sridhar

Run-time error SAPSQL_ARRAY_INSERT_DUPREC occurred

When creating a new SyncBo (T51) instance after syncing eventually MI Clients shows the following message:
[20070315 01:28:14:343] E [MI/Sync ] Received exception info code 10 and detailed message "Exception while callSync: The ABAP/4 Open SQL arrayinsert results in duplicate database records. records in the data base."
In sm21 shows message:
AB0 Run-time error "SAPSQL_ARRAY_INSERT_DUPREC" occurred
AB1 > Short dump "070316 205056 sapnw ELDA " generated
Looking for SAPSQL_ARRAY_INSERT_DUPREC error in SAP Note we found the note 817849 (Runtime error SAPSQL_ARRAY_INSERT_DUPREC occurs during sync).
We have downloaded and applied this note in Backend as note requires and ALL prerequisites of this note. Also we have upgraded to SP19 and Kernel to 155 (part 1 and 2). But problem continues and the client that happened this problem does not work any more, all new SyncBO instances created goes to MEREP_MON as Waiting status.
The dump on duplicate record is happening when the user is synchronizing and when a record is getting inserted to table merep_10100.
The solution /workaround could be to do a client reset for those devicesand test again and see if it is happening, but error returns happening after this.
When this happen SyncBo instance keeps on Waiting status (MEREP_MON). We couldn't understand why this happen suddenly and then no more new SyncBo could be created, all goes to Waiting status. Reprocess (ShiftF5) or start handler (Shift10) does not take any effect.
Best Regards,
Rogério

Hi Ajith
I am getting the same error and below is the error message from ST22. The only change is I am using for MTR application and the sync fails for the 2nd time when synched for patches for the MTR application. As it is generic sync, could you please advice to get rid of the problem.
An exception occurred. This exception is dealt with in more detail below
. The exception, which is assigned to the class 'CX_SY_OPEN_SQL_DB', was
neither
caught nor passed along using a RAISING clause, in the procedure
"LOG_INSERT_DB" "(FORM)"
Since the caller of the procedure could not have expected this exception
to occur, the running program was terminated.
The reason for the exception is:
If you use an ABAP/4 Open SQL array insert to insert a record in
the database and that record already exists with the same key,
this results in a termination.
(With an ABAP/4 Open SQL single record insert in the same error
situation, processing does not terminate, but SY-SUBRC is set to 4.)
Thanks, Raj

Run time error while login to RTF Template

Hi,
I am trying to create a sample report in BI Publisher. but while login into RTF Template I am getting below error.
Please rectify this problem?
Run time error '429'
Active x component can't ceate object
help me out

Runtime Errors         DYNPRO_FIELD_CONVERSION
Date and Time          07.05.2010 08:49:15
ShrtText
     A conversion error occurred.
What happened?
     The current screen processing was terminated, since a situation
     occurred from which it could not continue processing.
     This is probably due to an error in the current screen of the ABAP
     program.
What can you do?
     Make a note of the actions and input which caused the error.
     To resolve the problem, contact your SAP system administrator.
     You can use transaction ST22 (ABAP Dump Analysis) to view and administe
     termination messages, especially those beyond their normal deletion
     date.
Error analysis
     The program flow was interrupted and could not be resumed.
     Program "SAPMJ1IFN" tried to display fields on screen 1210. However, an
     error occurred while this data was being converted.

While doing SO, im getting run time error - reg;

Hi,
While doing sales order and whenever im doing save its getting runtime error.
Runtime Errors         MESSAGE_TYPE_X
Date and Time          14.12.2011 10:55:26
Short dump has not been completely stored (too big)
Short text
    The current application triggered a termination with a short dump.
What happened?
    The current application program detected a situation which really
    should not occur. Therefore, a termination with a short dump was
    triggered on purpose by the key word MESSAGE (type X).
What can you do?
    Note down which actions and inputs caused the error.
    To process the problem further, contact you SAP system
    administrator.
    Using Transaction ST22 for ABAP Dump Analysis, you can look
    at and manage termination messages, and you can also
    keep them for a long time.
Error analysis
    Short text of error message:
    Maintain the current CRM release (table CRMPAROLTP)
    Long text of error message:
     Diagnosis
         Various transfer errors occur when transferring SAP sales orders to
         CRM or there is no status update or the status update has errors
         when transferring from CRM to the SAP system. This is caused by an
         incorrect entry for the CRM release in the SAP table CRMPAROLTP, or
         no entry is maintained at all.
     System Response
         To avoid data inconsistencies, this message causes a short dump.
     Procedure
         Maintain table CRMPAROLTP in your SAP system as is described in SAP
         Note 691710 and then repeat the process again.
     Procedure for System Administration
    Technical information about the message:
    Message class....... "V3"
    Number.............. 302
    Variable 1.......... " "
    Variable 2.......... " "
    Variable 3.......... " "
    Variable 4.......... " "
How to correct the error
    Probably the only way to eliminate the error is to correct the program.
    If the error occures in a non-modified SAP program, you may be able to
    find an interim solution in an SAP Note.
Runtime Errors         MESSAGE_TYPE_X
Date and Time          14.12.2011 10:55:26
hort dump has not been completely stored (too big)
    If you have access to SAP Notes, carry out a search with the following
    keywords:
    "MESSAGE_TYPE_X" " "
    "SAPMV45A" or "MV45AF0B_BAPIDATEN_ERMITTELN"
    "BAPIDATEN_ERMITTELN"
    If you cannot solve the problem yourself and want to send an error
    notification to SAP, include the following information:
    1. The description of the current problem (short dump)
       To save the description, choose "System->List->Save->Local File
    (Unconverted)".
    2. Corresponding system log
       Display the system log by calling transaction SM21.
       Restrict the time interval to 10 minutes before and five minutes
    after the short dump. Then choose "System->List->Save->Local File
    (Unconverted)".
    3. If the problem occurs in a problem of your own or a modified SAP
    program: The source code of the program
       In the editor, choose "Utilities->More
    Utilities->Upload/Download->Download".
    4. Details about the conditions under which the error occurred or which
    actions and input led to the error.
System environment
    SAP-Release 700
    Application server... "personal"
    Network address...... "192.168.2.11"
    Operating system..... "Windows NT"
    Release.............. "5.2"
    Hardware type........ "4x Intel 80686"
    Character length.... 16 Bits
    Pointer length....... 32 Bits
    Work process number.. 1
    Shortdump setting.... "full"
    Database server... "PERSONAL"
    Database type..... "ORACLE"
    Database name..... "GCU"
    Database user ID.. "SAPSR3"
    Char.set.... "C"
    SAP kernel....... 700
    created (date)... "Aug 29 2006 00:18:21"
    create on........ "NT 5.0 2195 Service Pack 4 x86 MS VC++ 13.10"
    Database version. "OCI_10201_SHARE (10.2.0.1.0) "
    Patch level. 75
    Patch text.. " "
Runtime Errors         MESSAGE_TYPE_X
Date and Time          14.12.2011 10:55:26
hort dump has not been completely stored (too big)
    Database............. "ORACLE 9.2.0.., ORACLE 10.1.0.., ORACLE 10.2.0.."
    SAP database version. 700
    Operating system..... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2"
    Memory consumption
    Roll.... 8176
    EM...... 30311496
    Heap.... 0
    Page.... 139264
    MM Used. 14538320
    MM Free. 91952
User and Transaction
    Client.............. 100
    User................ "INFO_SD"
    Language key........ "E"
    Transaction......... "VA01 "
    Program............. "SAPMV45A"
    Screen.............. "SAPMV45A 4001"
    Screen line......... 65
Information on where terminated
    Termination occurred in the ABAP program "SAPMV45A" - in "BAPIDATEN_ERMITTELN".
    The main program was "SAPMV45A ".
    In the source code you have the termination point in line 338
    of the (Include) program "MV45AF0B_BAPIDATEN_ERMITTELN".
Edited by: kiran35086 on Dec 14, 2011 6:30 AM

Dear kiran,
This might be many reasons.If you have not done configuration properly system will take you to dump(Run time error).
Try read the diagnosis possibly you may understand the problem.
If not You coordinate with your technical team.
Thanks&Regards
Raghu.k

Run time error while installing Labview 8.6.1 in Vista x64

hai friends,
i got an error( Run time error) while installing Labview 8.6 software. this software has bought from NI. it shows the error path as setup.exe. this software i had tried to install in vista x64. but when i am installing the same software in windows xp, it is installing fine...so what was the problem for this error. how to solve it, please help me....

Thank You Mr.Jason Daming,
Same error what post Mr.muks referred in the last reply....
When the installation begins an error occurs (after the acceptance of licence step in the installation procedure) with the title on the error window "Microsoft Visual C ++ Runtime Library " and displays the program set up path with these statements " This application has requested the Runtime to terminate it in an unusual way. Please contact the application's support team for more information."
while installing the same Labview in windows XP..... it is installing fine... but in vistax64 only i am facing this kind of problem...

ABAP run time error

Dear ALL,
When we are creating sales order after entering sold-to-party, Material & Quantity when we press ENTER key That time
we are getting following run time error
Hoe to resolve this?
Runtime Errors         SAPSQL_INVALID_FIELDNAME
Except.                CX_SY_DYNAMIC_OSQL_SEMANTICS
Date and Time          15.01.2009 16:04:19
Short dump has not been completely stored (too big)
Short text
A dynamically specified column name is unknown.
What happened?
Error in the ABAP Application Program
The current ABAP program "SAPLV61Z" had to be terminated because it has
    come across a statement that unfortunately cannot be executed.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
    administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
    at and manage termination messages, and you can also
    keep them for a long time.
Error analysis
An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_SY_DYNAMIC_OSQL_SEMANTICS', was
     not caught in
procedure "SEL_KONDTAB" "(FORM)", nor was it propagated by a RAISING clause.
    Since the caller of the procedure could not have anticipated that the
    exception would occur, the current program is terminated.
    The reason for the exception is:
    An Open SQL clause was specified dynamically. The contained field name
    "ALAND" does not exist in any of the database tables from the FROM clause.
How to correct the error
Check the field name in the SELECT clause.
If the error occures in a non-modified SAP program, you may be able to
    find an interim solution in an SAP Note.
    If you have access to SAP Notes, carry out a search with the following
    keywords:
"SAPSQL_INVALID_FIELDNAME" "CX_SY_DYNAMIC_OSQL_SEMANTICS"
    "SAPLV61Z" or "LV61ZU01"
    "SEL_KONDTAB"
If you cannot solve the problem yourself and want to send an error
    notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
    (Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
       Restrict the time interval to 10 minutes before and five minutes
    after the short dump. Then choose "System->List->Save->Local File
    (Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
    program: The source code of the program
       In the editor, choose "Utilities->More
    Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
    actions and input led to the error.
The exception must either be prevented, caught within proedure
    "SEL_KONDTAB" "(FORM)", or its possible occurrence must be declared in the
    RAISING clause of the procedure.
    To prevent the exception, note the following:
System environment
SAP-Release 700
Application server... "slgsap-prd"
    Network address...... "10.140.1.11"
    Operating system..... "Windows NT"
    Release.............. "5.2"
    Hardware type........ "8x AMD64 Level"
    Character length.... 16 Bits
    Pointer length....... 64 Bits
    Work process number.. 0
    Shortdump setting.... "full"
Database server... "SLGSAP-PRD"
    Database type..... "MSSQL"
    Database name..... "PRD"
    Database user ID.. "prd"
Terminal................. "SD0123l"
Char.set.... "C"
SAP kernel....... 700
    created (date)... "May 6 2008 00:13:21"
    create on........ "NT 5.2 3790 Service Pack 1 x86 MS VC++ 14.00"
    Database version. "SQL_Server_8.00 "
Patch level. 159
Patch text.. " "
Database............. "MSSQL 7.00.699 or higher, MSSQL 8.00.194"
    SAP database version. 700
    Operating system..... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2, Windows
     NT 6.0"
Memory consumption
Roll.... 16192
EM...... 20949200
Heap.... 0
Page.... 196608
MM Used. 15928048
MM Free. 828016
User and Transaction
Client.............. 900
    User................ "ADMIN"
    Language key........ "E"
    Transaction......... "VA01 "
    Transactions ID..... "03F0E2DD6B35F16CBBFF002219897F24"
Program............. "SAPLV61Z"
    Screen.............. "SAPMV45A 4900"
    Screen line......... 930
Information on where terminated
    Termination occurred in the ABAP program "SAPLV61Z" - in "SEL_KONDTAB".
    The main program was "SAPMV45A ".
In the source code you have the termination point in line 672
    of the (Include) program "LV61ZU01".
    The termination is caused because exception "CX_SY_DYNAMIC_OSQL_SEMANTICS"
     occurred in
procedure "SEL_KONDTAB" "(FORM)", but it was neither handled locally nor
     declared
in the RAISING clause of its signature.
The procedure is in program "SAPLV61Z "; its source code begins in line
    260 of the (Include program "LV61ZU01 ".
Source Code Extract
Line SourceCde
642     if se_prestep              = yes or
643        se_read_only_one_record = yes.
644       if t681-ksdat is initial.
645         if se_read_all_prestep is initial.
646           select * from (t681-kotab) appending table <cond_tab>
647                  up to 1 rows
648                  where kappl = se_kappl
649                  and   kschl = se_kschl
650                  and   (coding_tab).
651           h_subrc = sy-subrc.
652         else.
653           select * from (t681-kotab) appending table <cond_tab>
654                  where kappl = se_kappl
655                  and   kschl = se_kschl
656                  and   (coding_tab).
657         endif.
658
659 * it is enough to find one record in prestep
660 * (care must be taken with pool tables - depending on database this
661 * will cost performance instead of saving)
662         if select_split ne 0 and h_subrc ne 0.
663           modify coding_tab from coding_alter index select_split.
664           select * from (t681-kotab) appending table <cond_tab>
665                  up to 1 rows
666                  where kappl = se_kappl
667                  and   kschl = se_kschl
668                  and   (coding_tab).
669         endif.
670       else.
671         if se_read_all_prestep is initial.
>>>>>           select * from (t681-kotab) appending table <cond_tab>
673                  up to 1 rows
674                  where kappl = se_kappl
Regards,
Akshay
Edited by: Akshay Dalal on Jan 17, 2009 6:25 AM
Edited by: Akshay Dalal on Jan 17, 2009 6:30 AM

Dear Akshay,
We will NOT be able to provide you with a solution on this forum, because we have no clue what configuration do you have in your system and what user exits or other custom development may have been done in your specific system.
Lakshmipathi has already correctly pointed to a similar post. You might want to get an ABAPer to set a breakpoint just before the error occurs, then he/she might provide you with more information, which may (or may not) be helpful.
There is obviously something wrong in the pricing condition either on configuration level or in a user exit. If you write to SAP (which you should, because it's a standard program), they will ask to connect to your system, because they don't have any chrystal balls over there either.
Just in case - before going any further, try running the program RV80HGEN (in the test system, of course), which re-generates requirements and formulas. Sometimes it helps, although I doubt that it is the case here.
Also if you've used some custom (Z...) fields in the pricing configuration, that's where the problem is most likely.

Package failed with run time error: " GETWA_NOT_ASSIGNED".

Hi,
One of our custom package is failing with run time error " GETWA_NOT_ASSIGNED". We are getting this error after refresh. Infact this package is working fine both in production and Dev, but in QA system it giving runtime error.
Here with I am pasting run time error details. Please see...If any one have any idea or clue or if you have faced this kind of error.
Thanks is advance.
Error Details.
What happened?
    Error in the ABAP Application Program
    The current ABAP program "CL_UJK_CUSTOM_LOGIC===========CP" had to be
     terminated because it has
    come across a statement that unfortunately cannot be executed.
What can you do?
    Note down which actions and inputs caused the error.
    To process the problem further, contact you SAP system
    administrator.
    Using Transaction ST22 for ABAP Dump Analysis, you can look
    at and manage termination messages, and you can also
    keep them for a long time.
Error analysis
    You attempted to access an unassigned field symbol
    (data segment 32774).
    This error may occur if
    - You address a typed field symbol before it has been set with
      ASSIGN
    - You address a field symbol that pointed to the line of an
      internal table that was deleted
    - You address a field symbol that was previously reset using
      UNASSIGN or that pointed to a local field that no
      longer exists
    - You address a global function interface, although the
      respective function module is not active - that is, is
      not in the list of active calls. The list of active calls
      can be taken from this short dump.
Regards, Trine

Hi Trine,
the error is about some field you are trying to map using field-simbols, that is diferent in the other system.
Go to the code program in the st22, there you will see when the erros occurs e what field gives the error.
Best Regards,
António

Run time error in adobe reader X 10.1.

Hi Adobe Team,
I have an application bulid on powerbulider which is capable of extracting the pdf files.we have deployed it in citrix server,My problem is While opening some of the pdf files from my application I am getting a run-time error
"Runtime Error!
Program C..
This application has requested the Runtime to terminate it in an unusual way. Please contact the application's support team for more information."
We have checked in our application and found no errors,I would like your assistance in these Issue?
Note:The error comes up not with all pdf files and even it is in random based.
I am using adobe reader X 10.1.2 to view the files.
your input will be apprecieted,
Thanks in advance
Sagar

Hi,
we have tried with 10.1.3 but no go,we didn't find any error's in log in our application that is why we are insisting you.I hope this appers to be the some technical problem from adobe.
Thanks and Regards,
sagar

Run-time error "CONVERSION_CODEPAGE_UNKNOWN" occurred in BW SapNetweaver.

Today I have problem with this error dump: Run-time error "CONVERSION_CODEPAGE_UNKNOWN"
I got this problem from rspc chain manager but also from another place as place a filter on table VARI.
I suspect that this include "IMPORT_VARIANT_STATIC" got problem of the (Include)
program "RSDBSPVD".
This is first time that I got this error.
I think problem was linked to VARI tables and include IMPORT_VARIANT_STATIC in this program RSDBSPVD
Runtime Errors         CONVERSION_CODEPAGE_UNKNOWN
Date and Time          03.06.2008 14:27:46
|Short text
|    Unable to convert from code page ' ' to code page '4103'.      |What happened?
Error in the ABAP Application Program
The current ABAP program "RSDBSPVD" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
One of your chosen conversion tables (CODE PAGE) ' ' or '4103'
is unknown to the system.
For a list of conversion tables known to the system, see table
|    TCP00. To display this, use Transaction SPAD.
Active Calls/Events
No.   Ty.          Program                             Include                             Line
Name
4 FORM         RSDBSPVD                            RSDBSPVD                              119
IMPORT_VARIANT_STATIC
3 FORM         SAPLSVAR                            LSVARF07                              522
IMPORT_VAR_SELC
2 FUNCTION     SAPLSVAR                            LSVARU07                               80
RS_VARIANT_CONTENTS
1 EVENT        RS_VARIANT_VALUES                   RS_VARIANT_VALUES                      22
|      START-OF-SELECTION

Sorry, but my Sap Netweaver 2004s is a build 700.
I'm manually imported this table, before I exported table VARI from an old database of this istance. (db2 dart /ddel 'table space number' 'table id number')
log about vari import table:
SQL3501W The table space(s) in which the table resides will not be placed in
backup pending state since forward recovery is disabled for the database.
SQL3109N The utility is beginning to load data from file
"D:db2BW2db2dumpDART000025".
SQL3500W The utility is beginning the "LOAD" phase at time "05/29/2008
18:56:04.266758".
SQL3519W Begin Load Consistency Point. Input record count = "0".
SQL3520W Load Consistency Point was successful.
SQL3114W Some data following """" in row "F0-1242" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F0-1243" and column "10" was not
loaded.
SQL3227W Record token "F0-1242" refers to user record number "6536".
SQL3227W Record token "F0-1243" refers to user record number "6537".
SQL3114W Some data following """" in row "F0-1958" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F0-1959" and column "10" was not
loaded.
SQL3114W Some data following "u0178õ o½@: s]ªÂÅúõB'r" in row "F0-1959" and
column "11" was not loaded.
SQL3114W Some data following """" in row "F0-1969" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F0-1974" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F1-1634" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F1-1981" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F1-1982" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F1-1983" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F1-1995" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F1-1996" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F1-1998" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F1-2009" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F1-2010" and column "10" was not
loaded.
SQL3114W Some data following "u0178õ o½@: s]ªÂÅúõB'r" in row "F1-2010" and
column "11" was not loaded.
SQL3114W Some data following """" in row "F1-2012" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F1-2023" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F1-2026" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F1-2037" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F1-2040" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F1-2051" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F1-2052" and column "10" was not
loaded.
SQL3114W Some data following "u0178õ o½@: s]ªÂÅúõB'r" in row "F1-2052" and
column "11" was not loaded.
SQL3114W Some data following """" in row "F1-2054" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F1-2065" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F1-2066" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F1-2068" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F1-2079" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F1-2082" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F0-2240" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F0-2243" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F0-2253" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F0-2254" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F0-2255" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F0-2266" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F0-2267" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F0-2269" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F0-2280" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F0-2281" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F0-2282" and column "10" was not
loaded.
SQL3227W Record token "F0-1958" refers to user record number "11636".
SQL3227W Record token "F0-1959" refers to user record number "11637".
SQL3227W Record token "F0-1969" refers to user record number "11647".
SQL3227W Record token "F0-1974" refers to user record number "11652".
SQL3227W Record token "F1-1634" refers to user record number "11661".
SQL3227W Record token "F0-2240" refers to user record number "14014".
SQL3227W Record token "F0-2243" refers to user record number "14017".
SQL3227W Record token "F0-2253" refers to user record number "14027".
SQL3227W Record token "F0-2254" refers to user record number "14028".
SQL3227W Record token "F0-2255" refers to user record number "14029".
SQL3227W Record token "F0-2266" refers to user record number "14040".
SQL3227W Record token "F0-2267" refers to user record number "14041".
SQL3227W Record token "F0-2269" refers to user record number "14043".
SQL3227W Record token "F0-2280" refers to user record number "14054".
SQL3227W Record token "F0-2281" refers to user record number "14055".
SQL3227W Record token "F0-2282" refers to user record number "14056".
SQL3227W Record token "F1-1981" refers to user record number "14068".
SQL3227W Record token "F1-1982" refers to user record number "14069".
SQL3227W Record token "F1-1983" refers to user record number "14070".
SQL3227W Record token "F1-1995" refers to user record number "14082".
SQL3227W Record token "F1-1996" refers to user record number "14083".
SQL3227W Record token "F1-1998" refers to user record number "14085".
SQL3227W Record token "F1-2009" refers to user record number "14096".
SQL3227W Record token "F1-2010" refers to user record number "14097".
SQL3227W Record token "F1-2012" refers to user record number "14099".
SQL3227W Record token "F1-2023" refers to user record number "14110".
SQL3227W Record token "F1-2026" refers to user record number "14113".
SQL3227W Record token "F1-2037" refers to user record number "14124".
SQL3227W Record token "F1-2040" refers to user record number "14127".
SQL3227W Record token "F1-2051" refers to user record number "14138".
SQL3227W Record token "F1-2052" refers to user record number "14139".
SQL3227W Record token "F1-2054" refers to user record number "14141".
SQL3227W Record token "F1-2065" refers to user record number "14152".
SQL3227W Record token "F1-2066" refers to user record number "14153".
SQL3227W Record token "F1-2068" refers to user record number "14155".
SQL3227W Record token "F1-2079" refers to user record number "14166".
SQL3227W Record token "F1-2082" refers to user record number "14169".
SQL3114W Some data following """" in row "F1-9602" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F1-9603" and column "10" was not
loaded.
SQL3114W Some data following "u0178õ o½@: s]ªÂÅúõB'r" in row "F1-9603" and
column "11" was not loaded.
SQL3114W Some data following """" in row "F1-9612" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F2-9374" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F2-9375" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F2-9383" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F2-9397" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F2-9410" and column "10" was not
loaded.
SQL3227W Record token "F1-9602" refers to user record number "66049".
SQL3227W Record token "F1-9603" refers to user record number "66050".
SQL3227W Record token "F1-9612" refers to user record number "66059".
SQL3227W Record token "F2-9374" refers to user record number "66063".
SQL3227W Record token "F2-9375" refers to user record number "66064".
SQL3227W Record token "F2-9383" refers to user record number "66072".
SQL3227W Record token "F2-9397" refers to user record number "66086".
SQL3227W Record token "F2-9410" refers to user record number "66099".
SQL3114W Some data following """" in row "F2-11966" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F2-11969" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F2-12580" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F2-12581" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F3-12270" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F3-12273" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F3-12274" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F3-12283" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F3-12286" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F3-12287" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F3-12295" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F3-12299" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F3-12300" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F3-12308" and column "10" was not
loaded.
SQL3227W Record token "F2-11966" refers to user record number "83492".
SQL3227W Record token "F2-11969" refers to user record number "83495".
SQL3227W Record token "F2-12580" refers to user record number "86221".
SQL3227W Record token "F2-12581" refers to user record number "86222".
SQL3227W Record token "F3-12270" refers to user record number "86232".
SQL3227W Record token "F3-12273" refers to user record number "86235".
SQL3227W Record token "F3-12274" refers to user record number "86236".
SQL3227W Record token "F3-12283" refers to user record number "86245".
SQL3227W Record token "F3-12286" refers to user record number "86248".
SQL3227W Record token "F3-12287" refers to user record number "86249".
SQL3227W Record token "F3-12295" refers to user record number "86257".
SQL3227W Record token "F3-12299" refers to user record number "86261".
SQL3227W Record token "F3-12300" refers to user record number "86262".
SQL3227W Record token "F3-12308" refers to user record number "86270".
SQL3110N The utility has completed processing. "1053698" rows were read from
the input file.
SQL3519W Begin Load Consistency Point. Input record count = "1053698".
SQL3520W Load Consistency Point was successful.
SQL3515W The utility has finished the "LOAD" phase at time "05/29/2008
18:56:18.932604".
SQL3500W The utility is beginning the "BUILD" phase at time "05/29/2008
18:56:18.936928".
SQL3213I The indexing mode is "REBUILD".
SQL3515W The utility has finished the "BUILD" phase at time "05/29/2008
18:56:24.684630".
SQL3107W There is at least one warning message in the message file.
Number of rows read         = 1053698
Number of rows skipped      = 0
Number of rows loaded       = 1053698
Number of rows rejected     = 0
Number of rows deleted      = 0
Number of rows committed    = 1053698
Do you think that convert codepage errore is due to this warning message?

ABAP Run time Error whle executing the Balance sheet report in FGI0

Hi,
I am getting the below ABAP Run time error while executing the Balance Sheet report in FGI0.It was working before but now it is giving the error.Kindly help me in solving this.
Runtime Errors         MESSAGE_TYPE_X
Date and Time          06/12/2009 15:17:17
Short text
     The current application triggered a termination with a short dump.
What happened?
     The current application program detected a situation which really
     should not occur. Therefore, a termination with a short dump was
     triggered on purpose by the key word MESSAGE (type X).
Error analysis
     Short text of error message:
     RAISE RKD_CONDITION_READ       (internal error)
     Long text of error message:
      Diagnosis
          The program was terminated because a situation occurred which
          should not have arisen.
      Procedure
          Analyze the situation and contact SAP.
     Technical information about the message:
     Message class....... "KH"
     Number.............. 299
     Variable 1.......... "RKD_CONDITION_READ"
     Variable 2.......... " "
     Variable 3.......... " "
     Variable 4.......... " "
Trigger Location of Runtime Error
    Program                                 SAPLKYPR
    Include                                 LKYPRU31
    Row                                     36
    Module type                             (FUNCTION)
    Module Name                             RKD_CONDITION_READ
Thanks
Supriya

Hello,
Please refer SAP
Note 971535 - dump when deleting characteristic with hierarchy
Regards,
Ravi

Run-time Error '432' in WAD

Hi Experts,
While opening a web template in web application designer, I am getting following error,
Run-time Error '432' :
File name or class name not found during automated operation.
If i press ok, exist from WAD.
I have uninstalled the GUI and installed SAP GUI 6.4 with the latest patch, still getting the error.
It would be a great help if you could provide a solution for this.
Thanks,
Kaushik

We are talking about a small .dll.
No need of installing the OS again. I will say, ask your Windows administrator to look for it. He might look for it on MSDN or may be he will contact Microsoft for it.
Most probably it might be 10 minutes job.
Why don't You look for runtime error 432 in microsoft(MSDN) website.
and even if you reinstall Windows XP, I guess it won't resolve the issue. there are couple of issues I heard with XP and SAP applications.
Tnks
Message was edited by:
Keerti Vemulapalli

Cannot download itunes. error message is run time error 6034

I cannot download itunes. the error message is run time error 6034. advices to contact application support team

Try the following user tip if you're still having the 6034 issues:
Troubleshooting issues with iTunes for Windows updates

Outlook Contacts sync Run Time Error

Similar Messages

Maybe you are looking for