Outlook Data transfer messages

I wonder if anyone can help, I have recently bought a Blackberry and have sync'd with microsoft outlook and it all works fine but i get hundreds of data transfer message's in my Outlook Inbox, does anyone know what setting is causeing this?
Please help
Regards
Matt

it's unclear what you are trying to do
if you add gmail as IMAP account in the mailprogram you will get all your mails from gmail

Similar Messages

Transfer iTunes and Outlook data to a new PC

I'm successfully logged into Homeshare with my old computer and I've tried the methods listed here, but can't get to the "import" button that is supposed to import selected items. Is there an easy way to just take my data (Music and Outlook data including contacts and calendars) from my iPhone 5 and dump it into my new PC?

Apps are locked to the account that purchased them. They can't be transferred.
This may work
http://support.digidna.net/entries/22568283-How-to-Transfer-and-Sync-Saved-Games -State-and-Scores-across-Devices

Message type for data transfer through ALE

Hi Gurus,
I am working on master data transfer throgh ALE.We want to transfer data from Dev. server to Quality server.Here the client is same that is 123.We have defined logical systems and RFC also.Now for transferring inspection characteristic what is the message type that should be used in transaction BD64.please help.
Regards
Amit

not found any replies

Error message 'The Outlook data file (.pst) failed to load for this session.' when adding PST in Outlook addin

Hi All,
I have an Outlook (2003-2013) addin developed using C# (NOT VSTO).
A new client (using the desktop client for Outlook 365) has got a COMException error message stating 'The Outlook data file (.pst) failed to load for this session.' at the code line where I add the PST store (using Microsoft.Office.Interop.Outlook.NameSpaceClass.AddStoreEx).
I have never come across this error message before and there is barely any mention of this message on any forums. The only question I could find regarding this has been asked mid 2014 and hasn't been answered.
I'm fairly sure this is not related to either DisablePST or PSTDisableGrow registry key settings as I check fore their existance and notify the user separately.
Could anyone help me out on how to resolve this? I do not know where to begin even.
Thanks!!
Cheers!

Hi Eugene,
Thanks for the reply.
I pass the location that the PST is to be created (as a string), and the OlStoreType.olStoreUnicode constant.
The client is using a network location to store the PST file (even though we advised them not to) - leading to many corrupt PST files (that they are apparently happy to live with), but this is the first time we came across this message.
I would assume the problem is with that file, as no other clients are having any issue like this.
Have you come across this error message? Do you know what sort of scenario could be responsible for it?
Or would I have to file it under "random problems generated by network PSTs"? :P
Cheers!

How to know the data transfer is complited? there is any message will get l

how to know the data transfer is complited? there is any message will get like 'data uploaded is successfully complited' ?

Hi,
You can check SY-SUBRC = 0 or if there is an exception raised then an error occured.
Regards,
Ferry Lianto

Message 'can only work in client 001 during data transfer

Hello Experts,
Recently I setup a interface between ECC and SCM system for EWM, my data transfer was working fine until last couple of days when I getting this error message on the SCM side.
Message in CFM2 comes up as
Function/Q/SAPAPO/CIF_LOC_INBOUND
Text: You can only work in client 001
And not sure why because I have not made any changes to settings.
Can someone please suggest what might be going wrong and what needs to be done?
Thanks
Bhaskar

Hi Bhaskar,
I have not worked on EWM, and don't know if CIF connectivity is used differently.
But let me try to propose a general way forward based on your error message.
It seems that your CIF data is trying to reach a client where you are not authorized to work, or where CIF settings are not maintained properly.
Should be linked to RFC connectivity between R/3 and APO (unless it's due to some SAP bug).
Check out the following:
1) Which APO client is your CIF model pointing to? You would most likely be able to find this out by seeing the name of "logical system" for your CIF Integration Model (IM). It seems the CIF IM is pointing to some client which is something other than client 001.
Also, my guess would be that this client that you maintained in CIF IM is no longer having settings relevant for CIF, or something else.
2) Go to your APO system, and again cross-check which client you are using. Next go to /n/sapapo/cq and see which R/3 systems are having active connections to your APO system. The "logical system" corresponding to your R/3 system/client should be there in the list. if not, ask your Basis team if they made any changes recently.
PS: I would assume that you should get this same error for CIF of any object, not only material (unless the corresponding IM points to a different client in APO).
Let me know the results of your checks, and if this helps you in finding out the root cause.
PS: Logical system normally would have a naming convention like <System name>CL<Client>. e.g. PR1CL310. Here PR1 is system name and client is 310.
Thanks - Pawan

When you try to send or to receive email in Outlook 2010, you may receive one of these error messages: 0x8004010F: Outlook data file cannot be accessed. or 0x8004010F: The operation failed. An object could not be found.

0x8004010F: The operation failed. An object could not be found.
1. reviewed Profile instructions
2. Ran SytTools thinking it would fix the error. NO although I could send received I ended up with a giant pst
3. Back to Profile Instructions.
4. Set up new profile with my email address. email address tested well. Run Outlook. loads as outlook data PST
and gmail address PST. Deleted all the Gmail subscriptions to improve speed. Original error was gone but have two GIGANIC PST FILES.
5. Set up another new profile with my email address and a named pst. Run Outlook under that Profile -
comes up with newly named pst and the gmail addrress pst (although I can't figure out where that pst is located. Will not let me use email address as default Profile. Tried different approaches and still ended up always with the gmail address pst. Deleted
all profiles but email address and comes up.
6. Should I just go ahead and use the gmail address pst I need to import data or download data from gmail
to get last years correspondence.e
7. Outlook is my lifeblood, I am in communications and every submitted email gets moved to a file with an update.
Help?
8. One option is to merge psts but might make worse mess.
Thanks. Beautiful Beach weather here!

To resolve error 0x8004010F , identify the current location of your default Outlook data file, and then create a new Outlook profile.
Step 1- Locate the default Outlook data file
Click Start, and then click Control Panel.
In Control Panel, click Mail.
In the Mail Setup - Outlook dialog box, click Show Profiles.
Select your current Outlook profile, and then click Properties.
In the Mail Setup - Outlook dialog box, click Data Files.
Select the Data Files tab in the Account Settings dialog box, and then note the name and location of the default data file for your profile (a check mark will denote the default data file).
Click Close.
Step 2 - Create a new Outlook profile
Step 3 - Configure your new Outlook profile as the default profile
More detailed steps you can refer to this KB article:
http://support.microsoft.com/kb/2659085

6301 & PC Suite - "Data transfer not possible. Che...

Well, as the title says really.
Upgraded from 6280 -> 6301.
I use Outlook 2003 and sync contacts & calendar.
Sync'd the 6280 before finalising upgrade, plugged in the 6301 with a mini-usb cable (All driver reports it installed new hardware fine) once it had fully come into service and it wouldn't sync.
The phone displays "Data transfer not possible. Check connection" and Nokia PC Sync shows the warning "The mobile phone as not responded". It's solution is "Please ensure your phone is in the standby mode, then restart the Synchronisation. "
Have updated to latest version of PC Suite 6.85.
A bit annoying, as I no longer have any contacts info on the new phone...
Running XP, AMD 3ghz, 4gb ram.

Having spent many hours on this I have now got it working...
This is how :
1. On the phone go to : Settings: Sync and Backup: Server Sync: PC Syncronisation and enter a username and password.
2. Select Synchronise in Nokia PC Suite, in the Connected to 6301 window click the spanner (settings) icon. Now click the Adjustable wrench (Advanced) Icon and go to the sync profile tab and enter the same username and password that you used on the phone. Click OK twice and sync away...
Message Edited by kage64 on 05-May-2008 11:04 PM

6300: Unable to sync contacts: "Data transfer not ...

Hello,
I'm unable to syncronize contacts between my new Nokia 6300 and a computer.
What works:
* Pairing the device
* File copy to/from phone via Bluetooth / USB.
* Manually adding new entries using the handset keypad.
What doesn't work:
* Synchronising contact details between the 6300 and the Windows
Address Book.
- Fails when using Bluetooth, Mini-USB cable.
- Fails on two different machines; one Lenovo R60e Thinkpad,
one self-built desktop /w a USB Belkin Bluetooth adapator.
I've been trying to work around this problem for a few days now and
running out of ideas. Neither Google nor the Nokia FAQs showed any
obvious solutions.
Any and all assistance gratefully appreciated!
Steps to reproduce:
===================
* Connect phone to machine:
- Either by plugging into USB, and selecting 'Nokia mode' on
the handset, or
- Pairing with the host computer via Bluetooth.
- Note: No username or password is set under
"PC Synchronisation" on the handset.
* Load PC Suite.
- Select "Synchronise".
- Nokia PC Sync loads.
* Click "Select Phone".
- Check that the phone appears in the list of connected devices.
- Select "OK".
* Select "Settings".
* Select "Create new settings".
- Configuration Wizard appears.
- Select "Outlook Express (Windows Address Book)"; press "Next".
- Tick "Contact Items"; press "Next".
- Select "Synchronise the Default Windows Address Book"; press "Next".
* Select "Synchronise Now".
- Status messages read:
"Connecting to Wisp..." (Wisp is the name of the handset.)
"Waiting for Wisp..."
"Opening Databases..."
"Reading Outlook Express..."
"Synchronisation Completed"
- 2 warnings reported.
- Synchronisation process lasts a couple of seconds.
- Progress bar only ever reaches the 50% mark.
Failure mode:
=============
Handset displays the following messages:
"Data transfer not possible"
Then:
"Synchronisation info:
Contacts: Incomplete.
Unable to process all items.
0 sent. 0 received.
Contacts updated on other device:
New: 0 Removed: 0 Updated: 0
Contacts updated on my phone:
New: 0 Removed: 0: Updated: 0"
PC Sync report:
Under "PC Sync information":
- "PC Sync has encountered a problem and has
terminated the synchronisation."
Under "Warnings (2)":
- The following warnings were produced during the synchronisation:
The Synchronisation has been Terminated!
PC Sync information.
Under "The Synchronisation has been Terminated!":
- PC Sync could not update the data to the mobile phone.
Under "PC Sync information.":
- PC Sync has encountered a problem and has terminated the
synchronisation.
Troubleshooting attempts
========================
* As mentioned, attempted running the PC Suite software on two
different hosts - no change.
* As mentioned, attempted using both Bluetooth and USB
connections - no change.
* Attempted a "Reset to Factory Settings" on the
handset - no change.
* Attempted erasing both the Windows Address Book contents, so
that both data sources were empty - no change.
Version information
===================
Laptop
Operating System:
Windows XP SP2 (32-bit)
Build 2600
PC Suite version:
Nokia PC Suite 6.83.14.1
Connectivity Cable Drivers:
Version 6.83.9.0
PC Connectivity Solution:
Version 7.7.10.0
Bluetooth stack:
WIDCOMM Bluetooth stack
Version 5.0.1
Build 1500
(Note: Other test host is running same OS, PCS version.)
Handset
Firmware version:
V 04.70 (24-01-07) / RM-217
Memory in use:
Phone

with my NOKIA 6233 I have exactly the same problem. I have not been able to spend much time on searching solutions, yet. I did, however, install the firmware update - this did not solve the problem unfortunately.
Hi misternik,
From looking on Nokia's support site and elsewhere, I already appear to be running the latest firmware revision available for this handset.
However, further Googling indicates that there are two different engineering codes that can be used to reset a phone:
*#7780# - Normal reset. (Replace all configuration files with default entries.)
*#7370# - Performs a deep reset. (Reformat main memory and restore from firmware.)
I'm not sure which mode the standard menu entry triggers; I might have a go running a deep reset to see if that clears the fault.
In several contributions to this forum (but for other phones) I read something about a PC-suite mode on the phone. I do not have this mode. When I connect the USB cable I can only choose between DEFAULT, PRINTING and DATA STORAGE. Should there be a PC Suite mode ? Maybe this is related to the problem ?
The 6300 handset presents a menu when first connected via a USB cable, and offers those options - "Nokia mode", "Printing mode", "Storage mode", or similar.
Nokia mode appears to provide all of the Nokia-specific facilities, such as PC Suite synchronisation, so I don't think that's the problem.
Cheers,
David

5310 "Data transfer not possible" calendar sync is...

I'm trying to get my Nokia 5310 to synchronise its calendar with my work's Outlook 2003, using PC Suite 7.1.26.1. At work they use Windows XP and Outlook 2003 SP2. I don't want to bring my USB cable into work, so I'm using bluetooth to connect. The connection itself works fine - I can browse the 5310's media content, calendar and contacts using my computer.
The problem is with synchronising calendar with Outlook. It just won't do it. Every time, I get a "Data transfer not possible. Check data connection" message on the phone and a "PC Sync was unable to locate your Outlook message store" error in the PC Suite sync log.
Things I have tried:
Repair PC Suite.
Install new settings (spanner star button) and go through the wizard again.
As 2, but with manually selecting the Outlook folders on my profile (which were, in any case, already preselected correctly).
Copying a new profile and trying to sync with that.
Putting in (the same) username/password in PC Suite and the phone's "sync and backup" option.
None of these works. My work computer will happily sync with Google calendars, but won't sync with my phone.
I've had a good look through the forums but can't seem to find any solutions that work for me. Does anyone have any ideas of how I can get this to work?

Try one more thing. This worked for me.
1. Remove ALL email profiles. -
2. Recreate profile - don't forget to write down your Email exchanger server address. This will force Microsoft outlook to startup as if your a new user but will load your existing email from the server.
3. Setup PC Sync -- again
- this has been a pain in the neck!! - something gets corrupted in the profile that PC Sync does not like.

Issues with data transfer / connectivity

Hi,
I bought a Curve 8320 last week and activated BIS. The issue that I am facing is:
- Mails do not get delivered and connectivity to the internet is lost even though the data signal (EDGE) is available. I can see an upload arrow flashing on the right top corner
- What I have noticed is that the connectivity gets resumed when I do any of the following:
a. Switch on WiFi (immediately the data connection starts receiving and sending messages and internet connectivity is resumed). Even after switching off the WiFi, it works fine
b. Switch off the device and restart
Can someone help me? Please let me know if you need any more details.
Thanks

You can try using FExplorer and using it to delete the file C:\system\shareddata\101ff93b.ini from the phone. It should reset the Data Transfer app.
FExplorer you can find here:
http://www.gosymbian.com

Init w/o data transfer shows Added/Transfrd - 1/1

Hi ,
Init w/o data transfer load was successful after having applied Note 689964 - ODS object: Switching from a full to delta upload !
I have two weird ( nt sure ) issues below :
Issue 1
On Manage screen I see Added - 1 & Transferred - 1, however I dont see this record in the DSO ( Display data ).
Why is that so ?

Issue 2
All seems green excepting when I go check the Details Tab - I see some reds
DataStore Activation (Change Log) : Errors occurred
No data targets selected for update. Action terminated.
InfoPackage ZPAK_*** could not be started by Bapi_ipak_start
Errors in InfoPackage check for DataStore 0CCA_O09 ; no update possible
Please comment SDNer's

Dear Jr.Roberto,
Issue 1
On Manage screen I see Added - 1 & Transferred - 1, however I dont see this record in the DSO ( Display data ).
Why is that so ?

--> When you do a init with out data transfer, system transfers one record that is not corresponding to the data, but is a control record corresponding to the init selections.
Issue 2
All seems green excepting when I go check the Details Tab - I see some reds
DataStore Activation (Change Log) : Errors occurred
No data targets selected for update. Action terminated.
InfoPackage ZPAK_*** could not be started by Bapi_ipak_start
Errors in InfoPackage check for DataStore 0CCA_O09 ; no update possible
---> It is because you dont have a active update rules maintained for the infosource to the data target, or you have not selected any data target in the infopackage , it can also be the case that the infopackage which generates a program to start the load is having some errors, if possbile create another infopackage and start the load with active Update rules to data target.
Cheers!!!!
Charan
Message was edited by:
Sri Krishna Charan Viswanatha

Error while executing Initialize with Data Transfer for 0FI_GL_10

Hello All,
Post Pre prod refresh, our timestamp for the datasource 0FI_GL_10 got reset. Due to which our deltas did not bring any records to the BW system.
First we did an Initialize without data transfer for all the BW related datasources. The deltas were then set properly for all datasources except 0FI_GL_10.
We then raised a message to SAP and they suggested to run the 'Initialize with data transfer' for 0FI_GL_10 so that the timestamp is set and accordingly the deltas are fixed.
The issue now is we are getting the following error message while running INIT with data transfer.
Job terminated in source system --> Request set to red
Message no. RSM078
We have copied the data till July 1st week of 2011.
Please advice. The issue is very critical.
Thanks & Regards
Sneha

Hi Arvind
Thanks for your inputs.
Please find below the details of the short dump.
Runtime Errors         DBIF_RSQL_SQL_ERROR
Exception              CX_SY_OPEN_SQL_DB
Date and Time          09/07/2011 11:25:32
Short text
     SQL error in the database when accessing a table.
What can you do?
     Note which actions and input led to the error.
     For further help in handling the problem, contact your SAP administrator
     You can use the ABAP dump analysis transaction ST22 to view and manage
     termination messages, in particular for long term reference.
How to correct the error
     Database error text........: "ORA-01652: unable to extend temp segment by 128
      in tablespace PSAPTEMP"
     Internal call code.........: "[RSQL/FTCH/FAGLFLEXT ]"
     Please check the entries in the system log (Transaction SM21).
     If the error occures in a non-modified SAP program, you may be able to
     find an interim solution in an SAP Note.
     If you have access to SAP Notes, carry out a search with the following
     keywords:
     "DBIF_RSQL_SQL_ERROR" "CX_SY_OPEN_SQL_DB"
Information on where terminated
    Termination occurred in the ABAP program "GP_GLX_FAGLFLEXT" - in
     "FETCH_TO_ISTRUCTURE".
    The main program was "SBIE0001 ".
    In the source code you have the termination point in line 903
    of the (Include) program "GP_GLX_FAGLFLEXT".
    The program "GP_GLX_FAGLFLEXT" was started as a background job.
    Job Name....... "BIREQU_4N3PZQ12IA0X0PYGEA85IG39S"
    Job Initiator.. "BIWREMOTE"
    Job Number..... 11203300
    The termination is caused because exception "CX_SY_OPEN_SQL_DB" occurred in
    procedure "FETCH_TO_ISTRUCTURE" "(FORM)", but it was neither handled locally
     nor declared
    in the RAISING clause of its signature.
    The procedure is in program "GP_GLX_FAGLFLEXT "; its source code begins in line
    840 of the (Include program "GP_GLX_FAGLFLEXT ".

Linksys WRT54GS vs Dlink DI-524 data transfer rate different.

I was moving some files from one PC to another with the Linksys router and noticed it was slow so I ran DU Meter and Max speed of transfer was 156kb. I then hooked up my Dlink and did the same test and was getting7mg. Why the difference in data transfer speed?
Message Edited by Chadb on 08-23-2007 03:42 PM
Message Edited by Chadb on 08-23-2007 04:00 PM

I installed the new firmware last week. I'm here because of it. I now have intermittent drop/hang/mixed mode problem everybody's complaining about, which I never had before on my GS, till I went from 1.52.0 to the latest 1.52.2 on a v5 GS. Nobodys responded to me, so I'm rolling back.... I can't keep swapping to G only everytime the kids want to use thier PSP's

Determining Data transfer rate through modem in java

Hi,
I want to write an application in java which will communicate with
connected modem of the system and it will detect the data transfer rate.
I want to know how much data is transferring(upload/download)through modem and in a specific time how much data is transferred.
I will give some max upload/downloading limit for a specific time and if data transfer exceeds that limit,it will show message.
e.g if i fix max upload/download data transfer limit by the modem is say 10GB/20GB for a specific time span say for 15 days.Then my program automatically will start when the Modem will be connected and keep a log of data transfer(upload/download)and if data transfer goes beyond limit then it will show message.Also i would be able to see how much data is transferred for any specific day.
I want to know this type of application is possible in java.If yes then
which API's i need to use.
If this type of program is available in some site in other language then also i will be helpful.Pl give the links.
byeeeeeeee
Pradipto

Hi,
i want to do it in java only to explore the power of
java.I agree with Abuse, Java is not designed for such applications. I'm not even sure if you can solve your problems with Java.

Outlook Data transfer messages

Similar Messages

Maybe you are looking for