Outlook does not display in the syncronize part Desktop software.

I'm running Windows 7, and Outlook 2003 (SP3).
I have a BB Tour.
I've installed Desktop version 5.0.1.28.
No problem with the instillation or any or feature. However w hen I go to the syncronization and click on the box in front of Calendar (or any of the choices), the only 2 choices I see are:
None
ASCII Impoter/Exporter
I've read every word of every manual, and can't find anything that will help me get Outlook onto that list. According to the Help section, Outlook is supported, yet it doesn't display.
Any suggestions on how to get Outlook onto the list

Read this detailed KB article.
KB02362 Unable to choose or missing Microsoft Outlook when configuring synchronization options in BlackBerry Desktop Software
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

Similar Messages

  • Outlook does not display linked images after installin 7525 printer

    Installed 7525HP photosmart printer earlier today.  Since installation, Outlook does not display linked images when I open emails.  p6620f HP desktop computer. 

    You're probably not going to like the answer: Welcome to HTML-based email, and web (browser- or mail-based) rendering incompatibilities and quirks.
    Newer Microsoft Internet Explorer is (much) better than older releases, so see if a newer Windows client or a newer version of Outlook does better.
    If you really want to see what's going on here, view the raw HTML that's getting generated, and see what Microsoft wants or uses or expects within Outlook, and send that.

  • OUTLOOK Does Not Display Attachement Paper Clip in Inbox

    I have Outlook Home/Office/Bus 2013 and the paperclip does not display in the inbox SOME of the time. It's so unhelpful.
    But sure enough, if I open, there are the attachments. This never happened before I had 2013. Help. (5-2-15)

    What type of email account do you use?
    What file type are the attachments? Embedded images usually don't have the attachment icon.
    Diane Poremsky [MVP - Outlook]
    Outlook & Exchange Solutions Center
    Outlook Tips
    Subscribe to Exchange Messaging Outlook weekly newsletter

  • When I click on a link the address does not display in the location bar in the new tab. Which makes the back/forward button and refresh buttons unable to be used

    When opening a link any link from firefox address does not display in the location bar. Even when navigating forward from there the address does not show back/forward button and refresh all rendered unable to be used

    Do you have that problem when running in the Firefox SafeMode? <br />
    [http://support.mozilla.com/en-US/kb/Safe+Mode] <br />
    ''Don't select anything right now, just use "Continue in SafeMode."''
    If not, see this: <br />
    [http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes]

  • The control of adf media does not display even the Control attribute is set

    Hi
    I am trying to play a clip in a jspx page. I use an ADF media to embed the file and play the file by quicktime. I set the control display attribute to "all" or "typical" but the control does not display when the browser(FF) display the clip.
    Can anyone help me?
    Thanks

    try adding mime-mapping in web.xml. Just a suggestion and I haven't tried this control.

  • Related Content does not display on the name change page

    Hi all,
    Currently, i am doing some research for the related content. I find that delivery configuration has been on the Name Change component (self service). Then I do the security configuration but the related content option does not display on the name change component. No idea which step next i should take.
    Please advise.
    Any reference or docs is also welcomed.
    Dennis

    Hi,
    What do you mean by my two nodes are all local.
    Are you trying to use Related Content within one environment?
    Make sure you have an authentication domain set on your webprofile and that your hosts file reflects this.
    Make sure there is no proxy or firewall in the way.
    Make sure Integration Broker is setup correctly.
    Try pinging your server including the authentication domain.
    Try looking for log files in the application server and errorLog.html in the Webserv folder.

  • When I burn a disc from a playlist in iTunes, the track names and artist info does not display on the disc when friends view/listen to it. This probably is an easy fix, but I need some advice.

    When I burn a disc from a playlist in iTunes on my MacBook, the track names and artist info does not display on the disc when friends view/listen to it. This probably is an easy fix, but I need some advice.

    No, this standard has been implemented for several decades.
    How iTunes remembers audio CDs - http://support.apple.com/kb/TA27785
    It is just conceivable you burned a CD that exactly matched one already in the Gracenote database.  Gracenote uses track count and duration to decide what CD it is you have in a computer.  If you have one that matches that it will label it.  You could conceivably even have one that matches it that is not the correct one.
    This script will only work on Macs:
    http://dougscripts.com/itunes/scripts/ss.php?sp=cdtexttocdinfo - script to use CD-text file on CD to label CD in iTunes

  • Siebel Charts gets generated but does not display in the Web client

    Siebel Chart is getting generated in NetChart4.6\Server\root\projects\Siebel.chart folder. However does not display on the Web client
    There is either no error displayed on the front end...
    Also note that Charts is installed on Windows environment and Siebel Server is installed on Linux Server

    Dear User,
    Thanks for using Oracle communities.
    Does this happens in dedicated client as well?
    We would need to have traffic captured when you are actually executing actions. The tools like fiddler etc will help here to track the traffic.
    I would suggest you open SR with MOS since it will need some analysis on network trace like fiddler. You can refer this thread in SR as well, so that once issue gets resolved thread will get updated with solution which will benefit others.
    Best Regards,
    Chetan

  • ASDM - does not display all the rules

    Hello,
    we replaced our PIX525 firewall with an ASA 5540 firewall, and now we see some strange behavior in ASDM.
    ASDM does not display all the rules, but i see all all the rules in cli.
    What can be the problem?
    inside-asa# show ver
    Cisco Adaptive Security Appliance Software Version 8.2(5)
    Device Manager Version 6.4(5)

    Sure, i think we can manage that but i can only reply after one or two weeks ( change management ).
    But i thought that our ASDM version is OK with this ASA version, see the link,
    http://www.cisco.com/en/US/docs/security/asa/asa82/release/notes/asarn82.html#wp309157
    Thank you for you help.

  • Approved App Does Not Show in the App Part Section.

    Hi all,
      I have successfully add an App from the SharePoint App Store to my SharePoint Site which was developed using SharePoint 2013. The added app was successfully Approved then when I try to add that app using the App Part to a web page I cannot Find it
    in the App Part section. I looked in the Site Collection Features & Site Features I couldn't find the app to activate. I don't think I have done some kind of mistake. So then what else I have to do to add that App part to the web page.
     Could someone try to solve this matter?
     Thanks,
     Regards,
     Chiranthaka

    Ok I found the solution from another thread & it is at the below!
    Cannot Add
    Approved App To A Web Page - App Does Not Show in the App Part Section.

  • .mov file does not display on the web-site

    iWeb is easy to use but my simply link to a .mov file does not work. I am working on the Domain file on my Desktop so I can move it between computers, and it renames the media file in the inspector from name.mov to name-1.mov. In the end the site does not display the animation.

    Are you linking to this file so that it can be downloaded from your website?

  • Custom playbar does not display in the list of available widgets

    I followed the steps described in the "Skins" page of the Captivate 5 help outlined here:
    http://help.adobe.com/en_US/captivate/cp/using/WSc1b83f70210cd101126156ac11c7f147d6b-8000. html
    Now my problem is, that my custom playbar is not displayed in the list of available playbars (neither in the Project->Skin Editor->Playbar nor in the list of widgets). If I just duplicate one of the existing playbar files in Gallery/Widgets/Playbars it's listed without problems.
    I use Flash CS5 to edit the playbar and tried to publish it as AS3 and AS2 - no success.
    Are there special settings I need to set in the publishing settings to get my playbar in the list? Anything else I'm missing?!
    Thanks,
    Peter

    Try putting the swf for the playbar in ...\Adobe Captivate 5\en_GB\Gallery\Playbars\AS3\

  • Captivate 7- The Closed Captioning does not display on the screen

    I am using Captivate 7 and I am concerned about the issue that the Closed Captioning, which is placed on the flash page and is supposed to display the introduction of our product with the caption, does not show up on the screen. It is confusing that the text of Closed Captioning shows normally on some of the computers in our company but fails to display on the others, no matter on IE 8 or 10. Due to the company policy and the product nature I won’t be able to make a snapshot. We have spent some time on this problem but failed to fix it. I am desperately looking forward to some solutions here. Thanks for any suggestion.
         The environment:
         Windows 7 Sp1
         Captivate 7
         IE 8 and IE 10
    Regards,
    Bill

    Try clearing out your project cache (Preferences > General > Clear Cache) then republish using the option to Force Republish All Slides.
    If that doesn't resolve the issue, you may be seeing the early stages of project file corruption.  Check the suggestions in this post about troubleshooting issues where you may need to copy all slides to a new blank project shell to try and strip out corruption:
    http://www.infosemantics.com.au/adobe-captivate-troubleshooting/basic-troubleshooting-tech niques

  • Regedit does not display all the registry keys

    For some reason not all existing keys in the registry are being displayed when using regedit utility.
    I know that the key exists because it is added by my code and it is being read back by the programming code correctly.
    However regedit cannot find it.
    How to correct that?
    /jas

    What version of Windows are you using?
    64-bit Windows has two (2) registries.
    The default is to run the 64-bit regedt32.exe which is in the C:\Windows\System32 directory and view the 64-bit register.
    If you want to view and/or edit the 32-bit register you must run the C:\Windows\WOW64\regedt32.exe.
    See info in Microsoft's article
    How to view the system registry by using 64-bit versions of Windows  
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

  • Cannot Add Approved App To A Web Page - App Does Not Show in the App Part Section.

    Hi all,
      I have successfully add an App from the SharePoint App Store to my SharePoint Site which was developed using SharePoint 2013. The added app was successfully Approved then when I try to add that app using the App Part to a web page I cannot Find it
    in the App Part section. I looked in the Site Collection Features & Site Features I couldn't find the app to activate. I don't think I have done some kind of mistake. So then what else I have to do to add that App part to the web page.
     Could someone try to solve this matter?
     Thanks,
     Regards,
     Chiranthaka

    First, are you sure the App contains an App Part?  Not all Apps are written to have app parts.  Second, did you add the app to the site collection from Add an App in the Site Contents page?  Apps that are added and approved from the Store
    are added to the App Catalog for the Web Application.  You would normally add them to the Site Collection from there after they are approved.
    Paul Stork SharePoint Server MVP
    Principal Architect: Blue Chip Consulting Group
    Blog: http://dontpapanic.com/blog
    Twitter: Follow @pstork
    Please remember to mark your question as "answered" if this solves your problem.

Maybe you are looking for

  • How to use script to get the first table row on each page?

    I create a print form to display a table. I set a conditional page break on this table, so the table rows on each page could be different. For example, there're total 50 rows in this table. On the 1st page, there're 5 rows, but on the 2nd page, there

  • Confused... why are my exports smaller than my versions???

    I am having a heck of a time figuring this out. My file size (I've not done a thing to the photo since importing it) is 4.29MB. When I export the photo as a version it's 1.81MB. What's going on here?

  • Firefox doesn't open, error message says Problem Event Name is BEX

    Firfox would not open after previously working. After uninstalling and reinstalling, it worked when I launched it from the install, however it will not open any time after that, saying Firefox has stopped working. The Problem Event Name is BEX.

  • Creating an Activity: "Display" is a mandatory field

    Hey again, I try to create an activity. Let's say I want to create a ToDo item. For this, I use the Webservice 2.0 and try to attach the Activity to an lead. The code looks like this in Java:      public ActivityData activityDataByPatternA( String su

  • Multiple plans for my SQL- Which one is following?-11gr2

    11gr2, windows-64-bit I have one sql_id part of 3rd part application, need to tune it. When I tried to get its execution plan im seeing multiple plan_plan values. That means, multiple plans for same sql_id How could we know that which plan my sql_id