Outlook Error 0x80040126 - Intermittent - HELP

Hello - have Outlook 2010 and the Outlook connector configured for a Hotmail account.  Currently getting error x80040126 - intermittently - on wifi, Ethernet, or on Verizon hotspot.  Trying desperately to solve the issue...

Hi,
Do you have any other account in Outlook? Do they work properly?
For the error x80040126, I suggest you create a new profile to setup the account in Outlook:
http://support.microsoft.com/kb/829918/en-us
I hope this helps.
Regards,
Melon Chen
TechNet Community Support

Similar Messages

  • My blackberry tour does not sync my contacts anymore with outlook 2007. I do not get an error message. Help!!

    My blackberry tour does not sync my contacts anymore with outlook 2007. I do not get an error message. Help!!

    Norton is probably the issue. It can really screw things up, that is one reason I never use it. See if you can temporarily disable it and then try the sync and see if that works.
    On a Mac, there is a way to run a program that repairs permissions for the user, not a Windows thing.

  • I need help.  I am trying to link my icloud contacts and calender to Microsoft Outlook on Office 365.  I keep recieving iCloud Setup for Outlook Error Report (v4.6.18.0) - Error: 0x80040102: CopyMessages failed.  Help.

    I need help.  I am trying to link my icloud contacts and calender to Microsoft Outlook on Office 365.  I keep recieving iCloud Setup for Outlook Error Report (v4.6.18.0) - Error: 0x80040102: CopyMessages failed.  Help.

    Hi petro_jemes,
    Just a little claritification, you need to add the value to the variable "[string]$ou", and also change the language in the variable "$emailbody" in the function "Get-ADUserPasswordExpirationDate".
    I hope this helps.

  • Outlook won't launch since software update. tried reinstalling the outlook program, still nothing. help!

    outlook won't launch since software update. tried reinstalling the outlook program, still nothing. help!

    same issue here, all other office programs work. Outlook fails to launch and gives an error message

  • Unable to receive e-mails & Sending and Receiving' reported error (0x80040126) & (0x8004102A) : The operation cannot be performed because the connection to the server is offline.

    Everything good until yesterday, Sending and Receiving' reported error (0x80040126) & (0x8004102A) : The operation cannot be performed because the connection to the server is offline.
    I am connected so I don't know why it is "offline". I am able to "send emails" but not receiving.

    Hi,
    What’s your Outlook account? Exchange account or some other Internet email accounts?
    This issue is usually happened when the Microsoft Outlook Hotmail Connector account is syncing changes to a folder and cannot find the folder in the Outlook client. Please try the following KB to check it:
    http://support.microsoft.com/kb/2231628
    If the issue persists, please create a new Outlook profile and add the email account to have a try:
    http://support.microsoft.com/kb/829918
    Regards,
    Winnie Liang
    TechNet Community Support

  • Outlook error when completing workflow task.

    Hi,
    Outlook error when completing workflow task.    I am receiving a "This task could not be completed at this time" error message in Outlook 2010 when completing a SP Approval workflow by using the "Open this Task" button
    in the ribbon.
    Please let me know the resolution for this issue.
    Thanks & Regards,
    Sasidhar K

    Hi Sasidhar,
    I'd first suggest installing any available updates on both Outlook and SharePoint sides for the issues related with Outlook integrated with SharePoint,
    Also, please take a look at this thread which disscused the same issue and see if it helps. <Steve_MTC> had a good summary of his findings:
    http://social.technet.microsoft.com/Forums/en-US/7a81aa4f-077b-4954-a110-7595169477e2/outlook-error-this-task-could-not-be-completed-at-this-time-when-completing-sp-approval-workflow?forum=sharepointgeneralprevious 
    You might also want to seek assistance in the forum of
    SharePoint, other partners who read the forums regularly can share their knowledge.
    Regards,
    Ethan Hua
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.

  • Photoshop Elements 8. "Could not use Clone Stamp Tool because of a program error."  Please help.

    Photoshop Elements 8.  "Could not use Clone Stamp Tool because of a program error."  Please help.

    Try this:
    Open your picture file
    Access the clone stamp tool
    Hold down the ALT key on the keyboard and left click on the area from which you wish to clone, then release the ALT key, and click to place the pixels at the destination
    TIPS:
    It is a good idea to open a blank layer at the top in the layers palette, and do the cloning on this layer. Be sure that "sample all layers" at the top is checked. You can change the layer opacity if necessary
    Use the bracket keys next to the letter p on the keyboard to increase & decrease the size of the cursor
    Let us know  how you make out with the error message now.

  • Error message "iTunes Helper Resources not available" and saving to wrong Drive

    I am trying to upgrade iTunes to 10.7 on my PC but I keep getting the error message "iTunes Helper Resources not available". Diagnostics take me a support page which talks about not being able to see the device in iTunes - but I can see the device without problems.
    I thought I would try reinstalling iTunes from the webpage and it downloaded to my PC fine but when I went to setup, it showed me it is saving to a DVD drive - not my Hard drive. It also won't let me change the location for the file. I have no idea how that's happened as I obviously don't use the DVD drive as a USB (although the PC see's it as one) and I've never chosen it as the location for iTunes in the 7-8 years that I've been using it.
    I then thought I'd try uninstalling it and reinstalling it (to the correct drive) but again, it comes up that the DVD drive is invalid and won't uninstall iTunes.
    So I'm stuck and haven't been able to find anything helpful on the support pages or in iTunes Help.
    Please someone help ...
    Thanks.

    Try the following user tip. (Probably, the section on clearing the installation database might be best given that you've currently got a drive on the problematic letter at the moment.)
    "Invalid drive X:\" install errors

  • My macbook pro is connected to internet via my time capsule but my iPad and iPhone won't. it shows wifi connection to the time capsule but when i go on to the internet on the iPad or iPhone, it comes up with network error. can anyone help?

    my macbook pro is connected to internet via my time capsule but my iPad and iPhone won't. it shows wifi connection to the time capsule but when i go on to the internet on the iPad or iPhone, it comes up with network error. can anyone help?

    This can be caused by a number of issues.
    Was everything working and then suddenly stopped??
    Or is this a new clean setup and has never worked.
    Do you have a cable modem which is not a router and the TC setup in bridge? That will cause it. The TC must be in router mode, ie dhcp and nat.
    Check the IP the MBP gets including dns and gateway..
    Then check the ipad/iphone.. post what IP dns and gateway (router in applespeak) they get.

  • My ipod touch 2g is on black screen.when i connect it to my pc it is not recognizing it.then i opened i tunes and put the phone in dfu mode it says an ipod is detected but it cannot be restored error 1600.plz help me...

    my ipod touch 2g is on black screen.when i connect it to my pc it is not recognizing it.then i opened i tunes and put the phone in dfu mode it says an ipod is detected but it cannot be restored error 1600.plz help me...

    Error 1604
    This error is often related to USB timing. Try changing USB ports, using a different dock connector to USB cable, and other available USB troubleshooting steps (troubleshooting USB connections. If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
    If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
    Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode,put it into Recovery Mode.
    Restore and wait for the error.
    When prompted, click OK.
    Close and reopen iTunes while the device remains connected.
    The device should now be recognized in Recovery Mode again.
    Try to restore again.
    If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
    Error 1600, 1601, 1602
    Follow the steps listed above for Error 1604. This error may also be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software.

  • New to lightroom, used program last wk no problem, now unable to import any nef or jpegs, keeps showing error message, need help =(

    new to lightroom, used program last wk no problem, now unable to import any nef or jpegs, keeps showing error message, need help =(

    So where is LR trying to copy the files?  Check your destination in the Import panel at the right.

  • Certificate Related Error Message/Please Help

    Today I received an "Unable to verify SSL server pop.gmail.com" message on my Mail server. I transfer mail from gmail to Mail.
    "Mail was unable to verify the identity of this server, which has a certificate issued to "pop.gmail.com". The error was:
    The certificate for this server has expired.
    You might be connecting to a computer that is pretending to be "pop.gmail.com", and putting your confidential information at risk. Would you like to continue anyway?"
    In the lower box, it lists the Version, Serial Number, Issuer Name (which is from Zaire, Western Cape, and lists the organization as Thawte Consulting cc and other info, Subject name is Google Inc, common name is pop.gmail.com, then gives a Signature Algorithm, Parameters, etc.
    It won't let me Copy and Paste so I have not hit the Continue button for concern of losing that info for reference.
    I went to Help which instructed me to do the following:
    I'm getting a certificate-related error message
    If you get an error message with the word "certificate" in it, make a copy of the message and contact your Internet service provider (ISP) or network administrator. The error message may help them diagnose your problem.
    If your mail server uses a self-signed Secure Sockets Layer (SSL) certificate, each time you open Mail you'll see an error message stating that the certificate is not valid. You can continue, but you'll see the same message every time you open Mail. To stop seeing this message, you can permanently accept the certificate.
    To permanently accept a self-signed SSL certificate:
    Click the Show Certificate button in the error message.
    The certificate appears with a certificate icon in the upper-left corner.
    Hold down the Option key and drag the certificate icon to the desktop.
    Double-click the certificate icon on the desktop, and choose X.509 Anchors from the pop-up menu. Click Add.
    The certificate is permanently accepted.
    You must have permission to administer the computer for this procedure to work.
    For information about encryption, click "Tell me more."
    Instead of asking for the "580 Anchors" , it asked simply "Do you want to add the certificates from pop.gmail.com.cer to a keychain?"
    I clicked "Add"
    The pop.gmail.com certificate AND Thawte Freemail Member AND Thawte Personal Freemail certificates is now entered in my Keychain.
    There are no dates listed under "Created" or "Modified" for those certs under Keychain.
    IS THIS OK OR DO I HAVE A PROBLEM SINCE THESE THAWTE CERTS ARE LOCATED IN ZAIRE???
    IF IT IS A PROBLEM, HOW DO I FIX/CHANGE/OK/DELETE/MODIFY, ETC. IT? PLEASE BE CLEAR.
    CAN I/SHOULD I JUST DELETE ALL THREE/SOME OF THE CERTS NOW IN KEYCHAIN?
    WILL I STILL BE ABLE TO GET MAIL AS BEFORE THIS MESSAGE IF DELETE THE CERTS?
    I believe this is the first time I have received a message concerning certificates so I am naive concerning this.
    THANK YOU.

    I had similar gmail/cert problem yesterday - not for the first time!
    I deleted the prefs (user/library/preferences), deleted the gmail account (mail prefernces), ran applejack ( http://applejack.sourceforge.net/ ) & added the account from scratch.
    Annoying I know, and my inbox was 200+ emails but nobody seems to know what or why this happens (my previous post) http://discussions.apple.com/thread.jspa?threadID=243186&tstart=0
    Perhaps this is related to certain emails (an email scam), i run 3 macs & the mail account on the affected machine receives my business email & this is the only machine the gmail/cert problem occurs.

  • It says "error 7, windows error 127" Please help

    It says "error 7, windows error 127" Please help

    I tried that, got this error:
    An error occured during the installation of assembly "Microsoft.VC80.CRT.type="win32".version="8.0.50.727.6195".publicKeyToken="1fc8 b3b9a1e18e3b".processorArchitecture="x86". Please refer to help and Support for more information. HRESULT: 0x8007422.
    Please help!

  • After downloading the mac os x 10.6.8 I can't open safari. It first told me that I could not run it with Safari 5.1 so I downloaded safari 6 because I had read that that would solve the problem. However I am still getting an error message. HELP!!

    After downloading the mac os x 10.6.8 I can't open safari. It first told me that I could not run it with Safari 5.1 so I downloaded safari 6 because I had read that that would solve the problem. However I am still getting an error message. HELP!!

    I see this on Apple's support page:
    Available for: OS X Lion v10.7.5, OS X Lion Server v10.7.5, OS X Mountain Lion v10.8 and v10.8.1

  • Hi, i get the error -49 when trying to Export a Movie edited in iMovie and recorded with Elgato Video Capture anyone know why i get this Error and can help me?

    Hi, i get the error -49 when trying to Export a Movie edited in iMovie and recorded with Elgato Video Capture anyone know why i get this Error and can help me?

    Read this
    http://support.apple.com/kb/ts1583

Maybe you are looking for