Outlook error "The Delegate settings were not saved correctly. cannot activate send-on-behalf-of list. The operation failed"
Hi,
Re: "The Delegate settings were not saved correctly. cannot activate send-on-behalf-of list. The operation failed"
I have a client who is getting the above error when attempting to change delegate permissions in Outlook 2010.
She is also getting this error when she tries to remove a delegate.
I have tried recreating her mail profile.
I have also tried kb2593557. The auto fix didn't work at all and the registry fix only removes the error message and not the problem. This client would like to be able to edit her delegate permissions.
She is on Exchange 2010
Any assistance would be appreciated.
The article you provided is not related to the error message that the user is getting it.
Can you please provide better solution? I know this answer and this post is old but I am having same issue.
The error message is only (The Delegates settings were not saved correctly. cannot activate send-on-behalf-of list. The operation failed) I was not able to attach screen shot.
Similar Messages
-
I am trying to assign delegation to a user and I receive the following message.
The delegates settings were not saved correctly. Cannot activate Send-on-behalf-of list. You do not have sufficient permission to perform this operation on this object.
We are using 2010 for the server and client. There are only specific mailboxes that this is happening for after being migrated from Lotus Notes. The user can use their mailfile fine however it is just the delegation that appears corrupted somehow.
I'm not sure how to fix this. I have checked the access through the security tab in ad and that looks fine.
Any help would be appreciated.I did some more digging and I solved it.
This would be the solution:
In Active Directory Users and Computers
-Click on VIEW
-Click on ADVANCE FEATURES (this is important otherwise you won't see
the complete list in the next steps)
-Click on the USERS container
-Find the problem user's account
-Right mouse the account and click on PROPERTIES
-Click on the SECURITY tab
-In the top box, click on the SELF account
-In the bottom portion of the screen make sure the READ PERSONAL
INFORMATION & WRITE PERSONAL INFORMATION should both be checked for
ALLOW
If you can compare the permissions for 'SELF' with another user you probably should set them accordingly to be safe. I noticed that for the user where setting delegates (SOB) did
not work, more than those 2 permissions were missing.
Good luck!
David -
Error while configuring GCM: The push settings were not saved. Error 400
Hi,
While configuring push settings for google cloud messaging in azure mobile services, i entered the server key received from google developer console.
When i try to save the entry, i get the message The push settings were not saved <mobile-serversices-site>: Error 400
I have regenerated the key multiple times but of no use.
Am I missing something? I am a paid subscriber of Azure
Thanks, Laks.Sorry for the late reply. Sometimes there are transient errors in the portal that affect whether or not the settings can be saved. Also, you should make sure that you have an associated notification hub (which will show up in your push settings). If there
is no associated hub, you will always get errors when trying to configure. -
The import parameters were not filled correctly
Hi BW guru's
I am working on BW 3.O AND USING A FLAT FILE. I was trying to create hierachy to a infoobject(SalesrepID-SREP). First i enabled the (with hierarchies) tab under the hierarchy tab of change characteristics of SalesrepID, and selected the Time dependent hierarchy structure RadioButtoon. Then Activated the info object. All the tables for hierarchies are generated. (BIC/HIO/SREP,BIC/KIO/SREP and BIC/IIO/SREP) when I right click the info object and try to create Hierarchy it is populating an information box saying that the, "The import parameters were not filled correctly". please kindly try to help me.
Thanks in advance.Hi,
Under the Hierarchy Tab, click on the external characteristics button and transfer your sales office and sales region from the left-->right window. Return to the InfoObject maintenance screen and activate your Infoobject.
Right click on your infoobject and click on the "Create Hierarchy" option.
Hope it helps
Ravin -
Saving that always a file should be opened with a program does not work correct.
I want *.nzb to be opened with a certain program. I save this combination and still everytime I get the option of an other programm.The article you provided is not related to the error message that the user is getting it.
Can you please provide better solution? I know this answer and this post is old but I am having same issue.
The error message is only (The Delegates settings were not saved correctly. cannot activate send-on-behalf-of list. The operation failed) I was not able to attach screen shot. -
What should I do to connect to my iPod?
- Are you updating clicking on the update button in iTunes?
Try a reset. Nothing is lost.
- Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Try deleting file and try again. It is located:
IPSW file location for Mac and Windows -
I am trying to set up a new iphone to my old iphone's settings. When i have tried to back it up it displays a error message saying that it cannot back up because the back up was not saved. Anyone have any ideas?
First backup the old phone to iTunes using right mouse click then backup after that restore from backup on the new device .
-
Can't open PSD! "Could not complete your request because the required resources were not found."
Hi all,
I am having some serious issues with Photoshop CC and have alread lost a few days of work to a random bug. I have spent the whole day working on Photoshop to try and catch up on the lost work.
I was saving the PSD, closed the document and then tried to reopen it to make a quick change and I got this error: "Could not complete your request because the required resources were not found.". I am now unable to open the PSD.
Has anyone ever seen this and does anyone know if there is a way of resolving the problem?
Any help would be much appreciated.
Cheers
LeighI found a hack-y way to work around this problem without losing work!
So I discovered fairly quickly that this is an unsolved problem that NO ONE can explain the cause of. Here are step-by-step instructions on how to save your layers without losing progress.
Convert ALL of your layers to a Smart Object.
Right-click on the Smart Object
Click "Export Contents..."
This opens up a Save As... Window, with your file name .PSB
Name & Save.
I then quit Photoshop CS, re-opened, and had all of my layers, folders, and effects intact. The only problem was that my Canvas was as large as my biggest layer (extending beyond my original canvas). Just find the original background layer (or one that originally filled your canvas), Select it (Command + Click on the Layer thumbnail), and Crop it (Image > Crop).
Hope this helps. -
Server settings are not saved on client
The client has a new workstation (Vista) where the server settings are not saved. The client is able to login but have to setup the server settings overtime she logs on to SAP B1.
Client: Vista
SBO: 2007A SP01
what is causing this and how can this be resolved?You may check these threads first:
Re: Server name in Change Company does not stay
Re: SQL Connection to SAP Reset
Thanks,
Gordon -
Nokia N8 camera settings is not saved
Hey.
I found out that all the camera settings is not saved. For exampel i always want the grid displayed but then i have to turn it on manuelly every time. Same goes for the timer, id like it to be on 2sec so the picture not is taken as you push the button (shaky etc).
Probably more camera settings that not saved havent checked it all.
Solved!
Go to Solution.OK first of all look at this, 333 people viewed your original post and followed by 171, 144 and the last one that you responded 55 people viewed and yet your the only one with this problem lol
Here is the thing, I'm sure nokia had a damn good reason for not letting the grid option be set as default, and if you can't press two buttons to get to it, well that's your own fault for being lazy lol all these people viewed your post and not even one decided to say something, that's probably because no one really have a problem with what your complaining about and I don't count that new user since all her said was "No reply from Nokia on this???" hehe
anyways if nokia makes any changes in their camera setting and give us more options, well GREAT, but right now most people are happy with their N8 camera and its setting. Their are much more important issues regarding Nokia N8 and you picked the least important one lol way to go.
Don't forget that you can't compare the N8 with a digital camera, just because you can do things differently on a digital camera doesn't mean you suppose to do it on a camera phone. In my opinion the N8's setting is damn good, could get better and if nokia does something about it Great but I can do what I wanna do with the setting. So please try not to bring up any little problem you thing it has or you thing needs to be changed because I really don't think what you calling a problem is a problem
Nokia N80
Nokia N82
Nokia N97
Nokia N8 Dark Gray- RM-596 -
The requested URL was not found, or cannot be served at this time.
Hi,
While processing the Reports request, the Reports CGI gives
the following error -
The requested URL was not found, or cannot be served at this
time.
The error is shown only when the URL exceeds more than 1500 -
2000 something. If i remove some of the parameters to make the
URL shorter then it works fine. Is there any limitation
regarding the length(number of characters) of the URL send to
RWCGI60. Immediate help would be appreciated.
Thanks in advance,
Aniruddha.hello,
there is a limitation of the URL length. this limitation is
depending on the HTTP protocol and the used browser. it has
nothing to do with oracle reports.
a work around would transfer the parameter in the HTTP header.
regards,
the oracle reports team --pw -
Error message saying "iTunes has not been correctly localized for this language"
When trying to launch iTunes I'm getting an error message saying "iTunes has not been correctly localized for this language. Please run the English version"? Any suggestions are much appreciated and thank you in advance!
Let's try a repair install of iTunes.
Restart the PC first.
If you're using Vista or 7, now head into your Uninstall a program control panel, select "iTunes" and then click "Repair".
If you're using XP, head into your Add or Remove Programs control panel, select "iTunes", and click "Change". Select "Repair" and click "Next" as per the following screenshot:
Can you launch your iTunes now? -
The type Set is not generic; it cannot be parameterized with arguments K ?
When I use Hashtable or HashMap to get the keySet, it shows the error of "The type Set is not generic; it cannot be parameterized with arguments <K>".
The following is my code:
Hashtable table = new Hashtable();
table.put("A", new Integer(1));
table.put("B", new Integer(2));
Iterator its = table.keySet().iterator(); // <<<<<<<<<<<<<< this line shows the error "The type Set is not generic; it cannot be parameterized with arguments <K>"
How can I solve it? Please help me! I have no idea on it. It works fine in 1.4.
Best regards,
EricThe original is my codes, please help!
public static List findDlicApp(Date startDate, Date endDate, Connection con) {
String SQL = getSQL("app.sql");
String where = getSQL("app.sql.where");
boolean hasWhere = false;
if (startDate != null) {
SQL = SQL + " where d.create_date >= to_date('" + DMSUtil.convertDateToString(startDate) + "', 'yyyy-MM-dd')";
hasWhere = true;
if (endDate != null) {
if (hasWhere) {
SQL = SQL + " and to_date(to_char(d.create_date, 'yyyy-mm-dd'), 'yyyy-mm-dd') <= to_date('" + DMSUtil.convertDateToString(endDate) + "', 'yyyy-MM-dd')";
} else {
SQL = SQL + " where to_date(to_char(d.create_date, 'yyyy-mm-dd'), 'yyyy-mm-dd') <= to_date('" + DMSUtil.convertDateToString(endDate) + "', 'yyyy-MM-dd')";
hasWhere = true;
if (hasWhere) {
SQL = SQL + " and " + where;
} else {
SQL = SQL + " where " + where;
SQL = SQL + " " + getSQL("app.sql.order");
//System.out.println(SQL);
//Connection con = getParaDMConnection("findDlicApp");
HashMap<String, DlicApp> dlicDocs = new HashMap<String, DlicApp>();
List result = new ArrayList();
try {
Statement stmt = con.createStatement();
ResultSet rs = stmt.executeQuery(SQL);
long lastDocID = 0;
boolean hasStartDate = false;
while(rs.next()) {
long docID = rs.getLong("docID");
String docName = rs.getString("docName");
String refNo = rs.getString("refNo");
java.util.Date createDate = rs.getDate("createDate");
String creator = rs.getString("creator");
String profileType = rs.getString("profileType");
String assunto = rs.getString("assunto");
String fromEntity = rs.getString("fromEntity");
String location = getLocation(docID, con);
long fieldID = rs.getLong("fieldID");
String fieldValue = rs.getString("fValue");
DlicApp doc = null;
if (dlicDocs.containsKey(String.valueOf(docID))) {
doc = (DlicApp)dlicDocs.get(String.valueOf(docID));
} else {
doc = new DlicApp();
doc.setId(docID);
doc.setDocName(docName);
doc.setReferenceNo(refNo);
doc.setCreateDate(createDate);
doc.setCreator(creator);
doc.setProfileType(profileType);
doc.setAssunto(assunto);
doc.setFrom(fromEntity);
//if (doc.getStartDate() == null) {
// doc.setStartDate(createDate);
doc.setLocation(location);
if (fieldValue != null) {
if (fieldID == 1114) {
doc.setChineseName(fieldValue);
if (fieldID == 1115) {
doc.setPortugueseName(fieldValue);
if (fieldID == 1116) {
doc.setApplicationCategory(fieldValue);
if (fieldID == 1118) {
doc.setStatus(fieldValue);
if (fieldID == 1119) {
Date d = DMSUtil.parseDate(fieldValue, "yyyy-MM-dd");
doc.setStartDate(d);
hasStartDate = true;
if (fieldID == 1120) {
Date d = DMSUtil.parseDate(fieldValue, "yyyy-MM-dd");
if (!StringUtils.isEmpty(fieldValue)) {
//System.out.println(docName + ":" + fieldValue + ">>>>>>>>>findDlicApp>>>>>>>>>>>>>>>>>>APP END DATE: " + d);
doc.setEndDate(d);
if (docID != lastDocID) {
doc.setRelatedDocs(findRelatedDoc(docID, con));
lastDocID = docID;
dlicDocs.put(String.valueOf(docID), doc);
stmt.close();
rs.close();
Iterator<String> its = dlicDocs.keySet().iterator();
while(its.hasNext()) {
String id = (String)its.next();
DlicApp a = (DlicApp)dlicDocs.get(id);
a.setRelatedDocs(findRelatedDoc(a.getId(), con));
dlicDocs.put(id, a);
result.addAll(dlicDocs.values());
// take out start date is not in the given period
int n = 0;
while(true) {
if (n < result.size()) {
DlicApp a = (DlicApp)result.get(n);
Date sd = a.getStartDate();
if (!isWithin(sd, startDate, endDate)) {
result.remove(n);
} else {
n++;
} else {
break;
} catch(Exception e) {
e.printStackTrace();
if (result.size() > 0) {
Collections.sort(result, new DmsDocComparator());
return result;
}Edited by: EJP on 13/01/2011 14:41: added code tags for you. Please use them next time. -
I repeatedly receive an error message when trying to sync my ipod touch with my itunes library with my new computer which reads, "Some of the items in the itunes library were not copied to the ipod because you are not authorized on this computer." However when I try and authorize my computer I always receive the message that this computer is authorized. What am I doing wrong? I'm missing about 100 songs as a result of this error!!
See:
iTunes Store: About authorization and deauthorization
iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
Could the items be purchased by another account? -
Starting in 2015 I get the following error when I try to import my photos. "The following files were not imported because they could not be read" -DSC8416.NEF I've been importing the same type of photos with no errors then 2015 came along and now I can no longer import.
The error message is misleading, the problem is that you need WRITE privileges added to the destination directory tree.
Assuming you are using the "date" structure that LR defaults to, find the directory that contains the 2014 folder (the one that works) and add WRITE rights to the parent of "2014".
While you are there, if you want, add "2015" folder to beside "2014" and add READ and WRITE rights to that new directory.
Maybe you are looking for
-
Error on running reports with filters/security
Post Author: mishel CA Forum: Publishing Hi, I am trying to run a report with filters/security defined via Business View. When I run the report as administrator, I am able to view successfully. However, when I login as test/dummy account which f
-
Recalculation of quantity in free goods for return order wrf to invoice
Hello everyone, I want to recalculate quantity of free goods category in a return order created with reference to an invoice, if the quantity in the High Level Item Category has changed. For example, a customer bought 100 boxes of product "A " and re
-
CC Desktop app crashes mid-installation
Hey, I work in a post-production facility, and every time we need to install an update for CC, at least half of our machines experience problems with the CC Desktop App - most of the issues have to do with softwares not showing up as installed (even
-
hi there - my Brother purchased Microsoft Office 2008 for mac and gave me one of the licence codes, however - the code that I used to register my copy is apparently being used by someone else and so Microsoft Office has stopped working. I've now boug
-
Memory leak in weblogic server 5.1 sp 9?
We have been getting an out of memory error at production sites after several days of running. We changed the starup file to include the verbose:gc parameter and we are running jdk1.3.1_02. Over time the full garbage collection message shows that the