Outlook/Firefox Error

This is gonna sound crazy.
I got tired of fighting IE and all the errors it generates, so I made Firefox my default browser.
Now, when I click on a hyperlink in Outlook, it opens Firefox BUT it also opens the Yahoo Messenger installer! Most of the time, I can close the installer but sometimes it just starts running anyway.

Sorry for the delay. It still happens as described. You have to go through ALL OPTIONS -> Organize eMail -> Out of Office Replies to reproduce the error.
Thanks, Rosario

Similar Messages

  • Outlook Sync Error SOLVED - Multi-day repeating appointment cannot be converted for use on the Handheld...

    *UPDATE 1/23/2009 07:08 AM* This is a partial fix. I no longer think the Recurrence Range is the culprit. It seems the Time Zones features between Outlook & Palm are not cooperating. This explains why my 12 am events are syncing as 6 pm the day before; I live in GMT-6:00 so it's moving my events ahead by 6 hours. Another event I set for 1 pm in Outlook was changed to 7 am on my Treo. I am going to start over and recreate each event, this time setting the Time Zones, which I hadn't done before. I tested it out and it worked with a single event... let's see how long it lasts. I've also found that using 'No Time' on my Treo is not compatible with Outlook. It's better to set a time with 0 minutes duration.
    *UPDATE 1/23/2009 04:11 AM* This is a partial fix. My monthly and yearly problematic recurring events are now showing up at 6 pm the day before on my Treo, though my Outlook calendar is fine. I think this has to do with the Recurrence Range Start/End in Outlook, which is set automatically. If only there were a way to change this... 
    After a WHOLE LOTTA trial-and-error (like 3 days worth), I think I finally solved my OLERR:14-001 issue!
    Problem: Syncing Palm Treo 755p calendar with Outlook 2007
    Error Message (simplified):
    HotSync session completed with messages on [date] [time]
    HotSync session started on [date] [time], and completed in [0] seconds
    Outlook Calendar synchronization completed with messages
    Duration: [0] seconds
    Outlook Calendar
    The multi-day repeating appointment titled [event] beginning [date] [time] cannot be converted for use on the Handheld. Please divide the appointment up into single-days and re-synchronize.
     OLERR:14-0001
    - Desktop overwrite HH Sync
    Note: You will likely have several of these ‘Multi-day’ instances in your hotsync log (I had 58). You may want to change Calendar in hotsync to "Desktop overwrites Handheld" after you get this error, to avoid erasing events while you are fixing this issue. Otherwise, you may have to restore them from a backup copy (if you have one) and start over. You can switch back once you’re through.
    Solution: First, I tried this Palm KB Article: http://kb.palm.com/SRVS/NUA/launchKB.asp?c=31167. After this didn’t work for me… I did trial-and-error. I believe the problem is that each recurring event, which you set up as ‘All-day’, must be changed to have a duration of 0 minutes from within Outlook. I was able to change some events directly, but I found that some of the records had corrupted, and would just revert. My fool-proof solution was to recreate EVERY problematic event (yes, one-by-one) using the following steps:
    Open Outlook
    Go to your default calendar, where your events are synced
    In the top menu choose ‘View’ > ‘Current View’ > ‘Recurring Appointments’
    Open a ‘New Appointment’
    Enter subject and other options, such as Categorize, Importance, Time Zones, or Reminder
    Make sure starting and ending date & time are the EXACT same
    Select ‘Recurrence’ & choose your pattern
    I did not choose ‘No end date’ (hence the Palm article), but rather ‘End by:’ and typed in 2031, then pressed tab to auto-generate a suitable end date. I chose 2031 because that is last year my Treo’s calendar goes to. Click OK
    Repeat for every event in your error log, until you get a clean "Desktop overwrites Handheld" hotsync (Outlook should be closed when you sync)
    Switch Calendar in hotsync back to "Synchronize"
    Even though I still get the message OLERR14:001, my syncs are successful. Now I will give my Treo time to see if the issue returns later. Until then, happy Outlook syncing and good luck!
    Post relates to: Treo 755p (Sprint)
    Message Edited by akeaw3000 on 01-23-2009 04:11 AM
    Message Edited by akeaw3000 on 01-23-2009 07:08 AM

    hello,
    if all of your data is on the phone you can change the sync action to handhled overwrites desktop
    how to:
    open palm desktop software
    on the top left click on 'hotsync' and then 'custom'
    on the calendar conduit
    highlight it and click on 'change'
    then choose 'handhled overwrites desktop'
    hope this will help you
    Post relates to: Palm TX

  • Sometimes, when I click on a link, I see in the address bar the words: "Search bookmarks and history" (greyed out) just before I am taken to the link. Should I be worried? Is someone searching my personal data? Is this just a FireFox error msg?

    Sometimes, when I click a link on a web page, I see in the address bar the words: "Search bookmarks and history" (greyed out) just before I am taken to the link I clicked. A moment later, when I'm at the link, its address appears in the address bar, and all is normal. It seems that this happens only from some particular sites. Is FireFox reporting that my bookmarks and history are being searched?
    Should I be worried? Is someone searching my personal data? Is this just a FireFox error msg when it has trouble finding the website I requested?

    That is OK. Firefox will only display the link in the location bar after the DNS look up has succeeded and a connection to the server has been established. Until that has been done you see the default setting for the location bar: Tools > Options > Privacy > Location Bar: When using the location bar, suggest

  • Microsoft outlook connector error: no available message stores

    Any assistance out there on the 2010 MS OFFICE PRO - - upgraded from 2003 and having difficulties sync-ing the device.
    "Got a Microsoft Outlook Connector Error - - No Available Message Stores"
    Read a few post(s) and it appears that 2010 Office Pro was not yet tested when during Beta period...  Does anyone have any fix for this problem...
    Thanks!
    Norbert

    Hi there,
    There are lots and lots of threads in these forums of folks that are either 1) angry in that they thing RIM is going too slow or 2) truly trying to help each other out. The formal response is that 2010 is not yet supported by the RIM DTM software and no expectation of when that shall happen can be provided.
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • How to Fix ''The messaging interface has returned an unknown error. If the problem persists, restart Outlook.' Error

    How to Fix ''The messaging interface has returned an unknown error. If the problem persists, restart Outlook.' Error, user has outlook 2007 connected to exchange 2010 server , I tried scan pst, configuring new profile but no luck so far. Please suggest !
    Aditya Mediratta

    Hi,
    Please try the steps mentioned below and check if it helps:
    Open Computer > Local Disk C > Program Files > Microsoft Office > Office 12 > Outlook.exe.
    Right click on outlook.exe and click on Properties and then click on
    Compatibility tab. Uncheck the box ‘run this program in compatibility mode for’ under compatibility mode, click on Apply and OK.
    Note: If you are using 64 bit computer then the file location of the file will be
    Computer>Local Disk C>Program Files (x86) >Microsoft Office>Office 12>Outlook.exe
    Similar thread:
    https://social.technet.microsoft.com/Forums/en-US/aa396c9e-0ce5-4de5-99e3-4f0d771b07e0/exchange-2007-messaging-interface-has-returned-an-unknown-error
    Best Regards.

  • Firefox error when opening application

    Recently installed latest firefox 3.6.3. Had other issues going on with my computer so am unsure exactly what triggered this event while fixing other issues (checking for virus/malware, updating windows xp). Tried reinstalling but issue still present.
    When opening firefox, error message below appears.
    Error Message: The instruction at "0x7c884204 referenced memory at "0xffffffff". The memory could not be "read".
    Weird thing is, as I have firefox on my quick launch bar, when I double click it, attempting to open the application twice, it works, opening 2 firefox windows with no error. but when firefox is closed and I attempt to open just once, error message above appears.
    == This happened ==
    Every time Firefox opened
    == fixing computer of viruses and malware

    If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
    You can use "Disable all add-ons" on the ''Safe mode'' start window.
    You have to close and restart Firefox after each change via "File > Exit" (on Mac: "Firefox > Quit")
    See [[Troubleshooting extensions and themes]]

  • Zzxc: When click search in google web, firefox error and disappear

    When click search in google web or yahoo web, firefox error and disappear
    == Operating system ==
    window xp sp2

    Did it crash again while in [[Safe Mode]]? If you haven't started in safe mode yet, try that first.
    I also need some additional crash reports after you've tried safe mode. To look up your crash reports, I need the list of crash ID's from Mozilla Crash Reporter. Follow [https://support.mozilla.com/en-US/kb/Mozilla+Crash+Reporter#Viewing_crash_reports these steps] to get the reports, and reply back here.

  • Firefox errors when in outlook webmail

    When any of the users on my network open Outlook webmail through Firefox, they are experiencing the error below (randomly throughout the day). When you try to close the error, it does not go away. F5 will clear the error so they can continue to work, but it continues to be disruptive.
    Error
    A Web browsing error occurred.
    The entire error report is listed below: Hide Report
    View Privacy Statement
    Client Information ------------------ User Agent: Mozilla/5.0 (Windows NT 6.1; rv:27.0) Gecko/20100101 Firefox/27.0 CPU Class: Platform: Win32 System Language: User Language: en-US CookieEnabled: true Exception Details ----------------- Date: Wed Feb 19 2014 10:42:08 GMT-0500 (Eastern Standard Time) Message: uncaught exception: cannot cancel the callback when it is already finished or cancelled Url: Line: 0 Call Stack ---------- undefinedwindow$onerror@https://owa.lgca.org/owa/14.0.702.0/scripts/premium/uglobal.js:1 function Array$get_Length(){return this.length} function Array$get_Item(index){return this[index]} function Array$get_Enumerator(){return new Owa.Collections.ListEnumerator(this)} function Array$remove(oItem){var index=this.indexOf(oItem);if(index>-1){this.splice(index,1)}return(index>-1)} function Array$removeAt(iIndex){if(iIndex<this.length){this.splice(iIndex,1);return true}return false} function Array$add(oItem){this.push(oItem)} function Array$clone(){return this.slice()}

    Hi jwittlock,
    Does this also happen in another browser? The error that you gave is a warning that a function call is cancelling a completed script. Please check with outlook webmail if this happens in multiple browsers.
    The nonresponsive script on my webmail also shows up when I leave the tab open through out the day. I have added these knowledge base articles that help me impove this and make the nocitce go away.[[JavaScript settings and preferences for interactive web pages]] [[Warning Unresponsive script - What it means and how to fix it]]

  • Windows 7 ffox 1.6.16 installed office 2010 intimated cannot open link outlook firefox default browser, firefox will not initiate at all. Have to restart to get any response from firefox which then works but it crashes again. No error message

    Windows 7, firefox 1.6.16 just installed office 2010, sometimes cannot open a link in outlook and firefox is my default browser, and firefox will not initiate at all. Have to restart computer to get any response which then works but after a while it crashes again. Was this due to an update or office 2010 has a hidden setting somewhere? Why would firefox crash without any message? Intimated consuming

    I have had a similar problem with my system. I just recently (within a week of this post) built a brand new desktop. I installed Windows 7 64-bit Home and had a clean install, no problems. Using IE downloaded an anti-virus program, and then, because it was the latest version, downloaded and installed Firefox 4.0. As I began to search the internet for other programs to install after about maybe 10-15 minutes my computer crashes. Blank screen (yet monitor was still receiving a signal from computer) and completely frozen (couldn't even change the caps and num lock on keyboard). I thought I perhaps forgot to reboot after an update so I did a manual reboot and it started up fine.
    When ever I got on the internet (still using firefox) it would crash after anywhere between 5-15 minutes. Since I've had good experience with FF in the past I thought it must be either the drivers or a hardware problem. So in-between crashes I updated all the drivers. Still had the same problem. Took the computer to a friend who knows more about computers than I do, made sure all the drivers were updated, same problem. We thought that it might be a hardware problem (bad video card, chipset, overheating issues, etc.), but after my friend played around with my computer for a day he found that when he didn't start FF at all it worked fine, even after watching a movie, or going through a playlist on Youtube.
    At the time of this posting I'm going to try to uninstall FF 4.0 and download and install FF 3.6.16 which is currently on my laptop and works like a dream. Hopefully that will do the trick, because I love using FF and would hate to have to switch to another browser. Hopefully Mozilla will work out the kinks with FF 4 so I can continue to use it.
    I apologize for the lengthy post. Any feedback would be appreciated, but is not necessary. I will try and post back after I try FF 3.16.6.

  • Can not open pdf file in Outlook 2010 - error opening document

    when I click on the PDF file in the email (Outlook 2010), Adobe opens but it pops a window "There was an error opening this document. Access denied". If I save the document as a file, aka to the desktop, I can open it then.
    Also also I click on the ok button in adobe, it posted a Runtime error! application has requested the RunTime to terminate it in an unusal way.
    has anyone seen this issue. Desktop is using Windows XP, 4 gig ram, Adobe X verision 10.0.1

    Did you try this?  It worked for me.
    http://www.darrenstraight.com/blog/2010/12/16/adobe-reader-x-there-was-an-error-opening-th is-document-access-denied/
    Open up Adobe Reader X
    On the Toolbar Menu go to Edit > Preferences
    Go to the general tab under Categories.
    Untick “Enable Protected Mode at Startup”
    If asked if sure, click Yes and then Ok.
    Now close Adobe Reader X and try opening the PDF again.

  • Outlook 2013 error: The connection to Microsoft Exchange is unavailable

    Environment: Windows 7 Enterprise
    Setup: Fresh install of Office 2013
    Issue: When I launch Outlook I get the error:
    The connection to Microsoft Exchange is unavailable. Outlook must be online or connected to complete this action.
    Steps to resolve:
    I made sure my server name and mail address were correct but this did not have an impact.
    I am at a total loss on how to resolve this issue, is there anyway to manually connect to M.E> as it is just saying the connection is unavailable.  All of the other threads dealing with this issue have been no help.  I can sign into my account
    at login.microsoftonline.net so i know the account is valid.  I also receive email to my iPhone with the account and server.  Any advice would be wonderful.
    Now when I start up the application it tells me the same error and brings up something to alter the server and connection address.   

    Hi,
    Have you tried to recreate a new mail profile and then test the issue?
    To do this, please exit Outlook, and then go to
    Control Panel >Mail... > Add…
    Details about create a new mail profile, see:
    http://support.microsoft.com/kb/829918/en-us
    Also, you can try with this KB:
    http://support.microsoft.com/kb/2264398
    This issue occurs when the
    HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders registry key does not contain all of the required data. Specifically, these problems occur if the
    AppData string value is missing from this registry key.
    To resolve this issue, import the
    User Shell Folders registry key from a working Windows User Profile.
    Hope this helps.
    Best Regards
    Steve Fan
    TechNet Community Support

  • AppleSyncNotifier.exe entry point not found. Is this a Firefox error message?

    The rest of the error message reads as follows:
    The procedure sqlite3_wal_checkpoint could not be located in the dynamic link library SQlite3.dll
    After closing this error message Firefox does work. Anything you can tell me regarding this would be greatly appreciated. As a second thought I've wondered if it is an Apple iTune problem.?????

    Doublechecking, Dad:
    I have also reloaded all other iTunes software.
    Did you use the following document as a guide?
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    (If we're looking at program file damage down in Apple Application Support or Apple Mobile Device Support, the 2. Verify iTunes and related components are completely uninstalled section is very important.)

  • IPod Nano & Outlook Contacts - Error

    I keep getting an error when updating. I have it set to sync with all Outlook contacts but I get "iTunes cannot copy contacts to the iPod 'A.J.'s iPod'." Any body know a fix.....
    iPod Nano   Windows XP  

    Hi A.J.
    Welcome to Apple Discussions
    Just to make sure before going any further, have you looked at Knowledge Base Document #302270? It goes into detail on how to sync contacts with Outlook. I just want to point out:
    "Outlook 2000 is not supported.
    Only the primary email address is synced for contacts in Microsoft Outlook Express.
    You must have Outlook Express or a full version of Microsoft Outlook to sync information (trial versions of Microsoft Outlook may not work)."
    Jon
    I do not use a Windows computer. I just want to make sure you have seen some the reference documents.

  • HT204150 icloud sync to outlook 2013 errors in setup

    I was having some issues with icloud syncing with outlook 2013 on my windows 8 PC, so i uninstalled it and re-installed.   Ever since then, i have not been able to even get icloud for windows set up.  I keep getting an error in the final stage of the setup after i tick the box on outlook calendar, contacts and tasks in the control panel.  The error i get is: "Your setup couldn't be started because the iCloud server stopped responding."  When I hit the report button, the following eror comes up in the email: Error: 0x80004005: HTTP Error 503. 
    have uninstalled, restarted, downloaded a fresh version and re-installed then restarted again but this didn't work. 
    Any new ideas?
    thanks

    Hockley7 wrote:
    I have been trying for hours and numerous with reinstals of the desktop but I can't get the BB 7.1 Desktop to recognize my Outlook 2013 profile (Windows 8) so I can configure syncronizing the contacts and the calendar.  It worked on Outlook 2010 and in Wondows 7.  Spent 3 hours on the phone with MS and the profiles are there but they don't show up when I need to select the platform.
    Hi and Welcome to the Community!
    I am sorry to have to reference you to these materials:
    KB12268 Synchronization support for BlackBerry Desktop Software for Windows
    http://us.blackberry.com/software/desktop/desktop-pc/system-requirements.html
    You will notice that Outlook 2013 does not appear in any of that. Which means it is not supported. Which means it cannot be expected to function.
    Again, sorry.
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Help!! Unable to launch Outlook Express - Error says 'end of file reached'

    I double clicked on my icon to launch my email and got this message. I had Outlook Express 5.02 Tried rebooting twice. Backed up 5.02 on simple drive, then downloaded OE 5.06. Getting the same message... Unable to launch, end of file reached. anyone have any idea what is going on?? everything was fine yesterday!!! ps.. I am totally clueless with computers.. so need very specific (you are talking to a dummy) help here. PLEASE!!
    Thanks!!!
    imac   Mac OS 9.0.x  

    Hi, tsam -
    Welcome to Apple's Discussions.
    That error is often returned when one or more of OE's databases gets too full.
    Try compacting the databases in OE. This function is a built-in one, and can be done before the program actually loads. To do that, with OE not running hold down the Option key while opening OE.
    • If you're opening OE directly, hold Option down while double-clicking OE's icon.
    • If you're opening OE via the Mail icon in IE's toolbar, hold down Option while clicking that icon.
    You'll receive a splash message asking if you want to compact the databases - click OK. Once that is done, you can get rid of the old database files (they'll have been renamed to indicate that they are the old ones).
    OE keeps those files in its account (identity) folder(s). If you're not familiar with where those are -
    • Current versions of OE keep them here - (hard drive ) >> Documents >> Microsoft User Data >> Identities >> Main Identity.
    • Older versions of OE kept those in the Identities folder inside the program's folder.
    "Main Identity" is the original default account (identity = account); if you've created additional accounts, there will be a separate folder for each in the Identities folder.
    It would also be advisable to increase the Preferred memory allocation for OE. Adding 20 or 30 thousand to the original amount is not excessive - more is better.
    Article #18278 - Assigning More Memory to an Application
    • Whenever you replace or update a program, you must redo any changes made to its memory allocation amounts - the changes are not carried over to a new or replacement version.
    Also, when you update OE or IE, particularly if you have both the old version and the new version on the drive at the same time, reset the default choices for those in the Internet control panel.

Maybe you are looking for

  • HTML DB Installation problem on Linux

    I am installing HTML DB on a different ORACLE_HOME on Oracle 9.2.0.4 database. I am getting the following error in Enter HTMl DB Configuration Information window. The error mentions that SQLException error occurred while connection to database. On th

  • ACR 8.3 and D600 .nef Files

    I'm using a Nikon D600, shooting with a flaat picture profile to create both RAW and JPG files. I'm using: Adobe Bridge CC ver: 6.0.1. 6 x64 / Lightroom 5.3 / ACR 8.3 (I'm a CC user and I have all the current software available.) I have alot of exper

  • WRT54G as an access point

    Dear Sir, When I can find instructions how to configure the WRT54G as an ordinary access point for wireless equipment (notebooks, etc.) Is it technically possible to work without DHCP but assign my local static network addresses to wireless card devi

  • Resample on viewing images

    Hi, I was wondering if there's a way to make Photoshop (CS3) use "Resample" when displaying images on a zoom level less then 100%. In the default setting all pictures have jagged lines and aliasing effects which is quite annoying. I guess in a softwa

  • Noob Question about final Cut express

    Hey I am using FCE to create a home video atm, and I am trying to create a Title Screen out of Livetype, I'm not really versed in the mac so when I was setting up the preferences for FCE I just kind of took all the defaults without reading or looking