OUTLOOK FOR MAC 2011 ERROR CODE 17900
I KEEP GETTING AN ERROR CODE 17900 (INCORRECT USERNAME OR PASSWORD) WHEN RETRIEVING MAIL USING OUTLOOK FOR MAC 2011. PLEASE CAN SOMEONE ADVISE?
It is a pop account through btinternet.com. We have several email pop accounts, the others are fine. The username and password are both correct, but not accepted for the default pop account and continues to ask for the same information.
Similar Messages
-
Outlook for Mac 2011: error code:-17199
In outlook for Mac 2011, when trying to configure e-mail account (t-online), I get "error code -17199" (message cannot be sent as account could not be found)
It is a pop account through btinternet.com. We have several email pop accounts, the others are fine. The username and password are both correct, but not accepted for the default pop account and continues to ask for the same information.
-
How do I resolve this. Several people have asked this same question, but there is no answer.
Hi,
In the current forum we provide support for Office for Windows, since your question is about Office for Mac, please kindly refer to the Office for Mac forum:
http://answers.microsoft.com/en-us/mac
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank
you for your understanding.
Regards,
Melon Chen
TechNet Community Support -
Outlook for Mac 2011 error: "Sync Services has encountered a problem and needs to close"
I keep getting the Syce services error. I did find
http://support.microsoft.com/kb/2547327, which fixed the problem only for a day or two. now the problem is back. I need a permanent solution, not one I have to keep repeating. Any ideas on how I keep this error from popping up?Hi everyone,
I also met this issue before few days ago and I was looking forward a best solution for solving this issue too. In the midst of lot of answers
from different users and consultants, I got a blog that was recently published by someone, and then I move towards the blog beside that I discovered a nicer solution. It’s my personal experience. If any of you want to get free by barring this issue then you
also can try this solution once along with if you too wants to switch from Mac Outlook to Windows Outlook, here is a good solution for that matter too.
Helping link:
https://sites.google.com/site/errorsonmacoutlook/
Hope the above blog helps you too as it do it to me. -
I am using Microsoft Outlook for Mac 2011 and in the last two weeks all my tasks disappeared. I have tried to establish a new identity but the database will not rebuild (error code [18000]. I have tried to restore a backup from time machine but get the same problem. Any help would be appreciated
Not very many Outlook users here. You'll to better asking in Microsoft's Office:Mac forums here:
Office for Mac forums -
How do I solve the error code -19946, Microsoft Outlook for Mac 2011
I'm getting an error: error code -19946
Error
Could not synchronize record: <Message Name> to Exchange server: <Exchange Server Name>
Details
ChangeKey is required for this operation.
Error code
-19946
when using Microsoft Outlook for Mac 2011. When looking up the error, Microsoft has a solution for windows users, but not for mac users. http://support.microsoft.com/kb/2556352
Any ideas? Solutions? Help!As Office is not an Apple product, I strongly recommend asking in the Microsoft Office:Mac forums here:
Office for Mac
Everyone there is a Mac user AND an Office user, something you can't say about Apple's forums. You will get the fastest help there and I think you will find the contributors more than helpful. -
Unable to attach PDF to email (Outlook for Mac 2011)
We are pushing out software upgrades for CS5 and MS Office 2011 for Mac. We've discoverd that we can't use the Attach to email feature in Acrobat. The spinning rainbow wheel pops up for about a minute, and then Acrobat is non-responsive and we have to force quit. We can still drag and drop an attachment so we have a viable workaround but obviously we'd like to be able to use the automated feature.
All software is up-to-date.
In the preferences panel of Outlook, we have selected Outlook to be the default mail application.
As a sidenote, this feature doesn't work with Acobat X beta either. However, in the beta version of Acrobat X, if we declare Apple's mail application to be the default, it works fine. Unfortunately we use the Office suite as part of our enterprise system, so that's what we need to work with.
Has anyone else experienced this? I've logged a ticket with Adobe but I haven't heard back from them yet.
Thanks for any advise.Take the bhama way
figured out how to make it work. I am using Adobe Acrobat X Pro (mac)
and MS Outlook for Mac 2011.
For those who are interested, this is what I did:
1. Create a folder on desktop to save your pdf¹s files you want to email
to. Mine is named, "PDF to Email"
2. Open Automator, create a "Folder Action"
3. At the top, "Choose Folder", choose your newly created folder on the
desktop
4. Choose the "Rename Finder Items" action from the action list. I chose,
"Don¹t Add" on the add a Copy Finder Items Action menu.
5. On the "Add Date or Time to Finder Item Names" I chose, "Name Single
Item" from the first drop down menu.
6. Click on "Options" at the bottom of that window to select the "Show
this action when the workflow runs" so you can rename your file
something other than the Acrobat default.
7. Choose the "Create New Outlook Mail Message" from the action list and
add it below the "Name Single Item in Finder Item Names"
8. Choose "File>Save As" and give your file a name. Mine is, "PDF to
Email".
9. Close Automator
10. Open Acrobat X Pro.
11. Go to "File>Action Wizard>Create New Action"
12. Here you choose, "Save to>A Folder on my computer"
13. Choose the folder on the desktop that we saved earlier
14. Save the file, with the action name you will remember.
Now when you are in Acrobat X Pro and you want to send that .pdf file via
Outlook for Mac 2011, follow the steps below.
With the file you want to email open, go to "File>Action Wizard>(Action
you created) Mine is "PDF to Email". It will take a few seconds, but you
will get an "Action Completed". You will get a pop up that allows you to
name/rename the file. Then it should open your Outlook with your .pdf
attached and ready for sending.
You might need to tweak the actions to suit your needs, but this should
work for you.
De: DaveGrif <[email protected]>
Responder a: <[email protected]>
Fecha: Mon, 05 Dec 2011 15:56:02 -0700
Para: Eugenio Soberon <[email protected]>
Asunto: unable to attach PDF to email (Outlook for Mac
2011)
Re: unable to attach PDF to email (Outlook for Mac 2011)
created by DaveGrif <http://forums.adobe.com/people/DaveGrif> in Acrobat
Macintosh - View the full discussion
<http://forums.adobe.com/message/4065409#4065409>
It's supposed to work now? I've made sure I'm on latest (check for update)
and it says I am. Still get an error. It does bring Outlook to the
forground, but same error when I hide Outlook - An error occurred while
trying to create a mail document. Suggestions?
Replies to this message go to everyone subscribed to this thread, not
directly to the person who posted the message. To post a reply, either reply
to this email or visit the message page:
http://forums.adobe.com/message/4065409#4065409 To unsubscribe from this
thread, please visit the message page at
http://forums.adobe.com/message/4065409#4065409. In the Actions box on the
right, click the Stop Email Notifications link. Start a new discussion in
Acrobat Macintosh by email
<mailto:[email protected].co
m> or at Adobe Forums
<http://forums.adobe.com/choose-container!input.jspa?contentType=1&container
Type=14&container=3399> For more information about maintaining your forum
email notifications please go to
http://forums.adobe.com/message/2936746#2936746. -
I just migrated one macbook Pro to another both using OS X 10.8.5. When I try to open Outlook I get an error message that says "This identity cannot be opened with this version of Outlook".
It worked and still works fine in the original machine and Word & Excel work fine in the new machine, but not outlook. I tried removing Outlook for Mac 2011 and reinstalling but I get the same error message.
Any ideas out there?Or better yet, start using mac mail. I went back and forth between the two for year, and without getting into specifics or details I went back to mac mail and never looked back. Simple and does everything it supposed. Mac version outlook got stripped of a lot of functionalities that the pc version includes. With rare fixes, updates, and frequent problems between lost mail, corrupt identity files and mail which hangs up during the sent process just shows you that they half as*ed the mac version of outlook. Save your frustration and switch.
-
Microsoft Outlook for Mac 2011 is Crashing w/ OSX 10.9.3
Hello - I have been using Outlook for MAC 2011 on my MacBook Air (OSX 10.9.3).
Suddenly today it started crashing the minute I log-in to the application. Here is the detail of the info I received from the error report:
Microsoft Error Reporting log version: 2.0
Error Signature:
Exception: EXC_BAD_ACCESS
Date/Time: 2014-06-03 00:23:42 +0000
Application Name: Microsoft Outlook
Application Bundle ID: com.microsoft.Outlook
Application Signature: OPIM
Application Version: 14.4.1.140326
Crashed Module Name: CarbonCore
Crashed Module Version: 1077.17
Crashed Module Offset: 0x00069514
Blame Module Name: mbukernel
Blame Module Version: 14.4.1.140326
Blame Module Offset: 0x00008be7
Application LCID: 1033
Extra app info: Reg=en Loc=0x0409
Crashed thread: 12
Earlier versions of the above crash report said "Crashed Thread: 9" (instead of 12)....not sure if/how that makes a difference.
Can you tell from the above what this might be related to, and tell me please how I can get past this? At this point, everything in my Outlook is completely hidden from my sight (including all of
my tasks) until I can get back in again. It's pretty debilitating. :(
Thank you so much!You are far more likely to get a better/faster answer by posing your question in a forum dedicated to Office for Mac (this for is for Windows based Outlook)
http://answers.microsoft.com/en-us/mac/forum/macoffice2011-macoutlook?sort=lastreplydate&dir=desc&tab=Threads&status=&mod=&modAge=&advFil=&postedAfter=&postedBefore=&threadType=All&tm=1401774018776
Karl Timmermans [Outlook MVP] "Outlook Contact Import/Export/Data Mgmt" http://www.contactgenie.com -
Setting up icloud in outlook for mac 2011
I have tried to set up my iCloud email account in Outlook for Mac 2011. Incoming works fine. Outgoing doesn't. I have trawled over the support pages for the correct outgoing server info but on using the settings I am no further on. I did see a post by someone who had found the same problem and copied the settings that Mail uses which seems to be different for incoming than Apples recommendations. (but thats not a problem for me!) and unfortunately the outgoing in the Mail settings for my iCloud account simply shows "iCloud" so I am none the wiser!
Can anyone help? Incidentally my icloud account for email works fine on my iPhone and iPad.
thanks
Mikulwhitson81 wrote:
A window pops up after I have entered the correct password saying:
The srver for account "icloud" returned the error "(AUTHENTIFICATIONFAILED)". Your username/password or security settings may be incorrect. Would you like to try re-entering your password?
Also the link http://support.microsoft.com/kb/2648915 to guide set up does not tell you if it is IMAP, POP...etc
Can anyone help on this please?
Please note that Microsofts instructions (in the link you posted) are incorrect, it will never work if you follow those directions. -
Outlook for Mac 2011 - invitations
My wife sent me an invite from Mail on her MacBook.
I am using Outlook for Mac 2011.
OFM is giving me an error - "Item type is invalid for AcceptItem action"
Any ideas?If you're having problems with MS Office 2011, I'd suggest heading over to: http://www.officeformac.com and more specifically: http://www.officeformac.com/ProductForums/Outlook/
I know there are issues with Outlook syncing with iCal at the moment, perhaps this is one of them? -
Sharing photos via Outlook for Mac 2011
I am using iPhoto 11 v 9.1.1 (527) and Microsoft Outlook for Mac 2011 v 14.0.2 (101115). I have Microsoft Entourage selected for "Email photos using" in the General Preferences dialog box (Outlook is not available as a choice).
When I attempt to share photos via Outlook email via:
Share> Email >Compose Message
I get the following error message:
Microsoft Outlook got an error: Can't make {subject:"8 great iPhotos"} into type property of draft window.
Is there some way to make this work so that I can share photos via e-mail using Outlook?
I know I can use the media browser, but that doesn't allow you to add captions, or to control the size of the image.
Thanks, DaveYes - as noted
If you search the forums some people report to have found a solution Request Apple - iPhoto menu ==> provide iPhoto feedback and Microsoft address this issue permanently
At this time Outlook is not supported but some people have reported to find a hack to solve this - have you searched for the post?
LN -
How do you set up Outlook for Mac 2011 to access b...
I am having great trouble with the set up in Outlook for Mac 2011 to be able to access my btinternet mail account.
Can someone please advise what the correct settings are?
I also keep getting error messages about SMTP, though there doesn't appear to be any way of changing this setting in Outlook.
Thanks,
mercuriusWhat about this screen then? Outgoing server settings shown here. Full tutorial here http://mac2.microsoft.com/help/office/14/en-us/outlook/item/80a89303-9b46-4c04-a9f7-b3f88ac3106c
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones. -
This is my first attempt at using this forum so please be patient with me. I am new to the apple world. Bought an Imac desktop computer back in October and installed Microsoft Office for Mac 2011 because I was used to Word, Excel, Powerpoint, and outlook. Now I am being told that I should be using ical for my calendar so that I will be better able to move to icloud for use between my Imac, Ipad2, and Iphone.
The question is: how do I move my calendar which is in "Outlook for Mac 2011" into ical on my Mac? Do I have to remove the Outlook entries from the computer and reinstall them back to the same machine or can I somehow move calendar entries within the machine? I appreciate any help I can get. Thanks.I also already deleted my phone number from iMessage on my MBP.
-
Want to use Outlook for Mac 2011
Hello!
I want to use Outlook for Mac 2011 for my calendar, email, and contacts on my Macbook Air, iPhone 6, and iPad Air. Is this possible to sync with all these devices with this program? I am more organized with Outlook than using the different Apple programs. It has more options.
Any help would be appreciated.
Thank you in advance.If you have outlook on all 3 devices, should be okay. However, I am suggesting you to probably try the Apple's and get used to it as you are using all notebook, phoneme and tab with Apple. Might save you some money with that.
Maybe you are looking for
-
No output to speakers! HELP!!!
Running Panther 10.3.9 Using Garageband 2.02 + Quatafire 620 preamp/input gizmo. Headphones are connected to Quatafire and so are the external (Truth studiomonitors) speakers. I can use the speakers for everything BUT Garageband! I.e. iTunes,
-
Personal File Sharing question
Hi, I have a question about personal file sharing between my iMac Intel (my work computer) and an eMac (student work computer). I work at a college, and our regular back-up system on campus is just not worthwhile, so as a secondary back-up, I created
-
What hardware should I use for TTL synchronization?
I am searching for a hardware recommendation. Here's what the hardware should do: notify a PC program to run a subroutine upon detection of a TTL pulse (digital input change). So I need one 1-bit digital input, and the device should communicate with
-
Returning the file count of a folder--too slow
I am using the following to return the file count of a folder as part of a larger script with timeout of 5000 seconds tell application "Finder" set origFolder to "Somefolder" as alias set thePivotfiles to (every file of origFolder whose name ends wit
-
I can not even get onto Verizon Chat to obtain help. We are out of service due to storms and would like an ETA of services being restored. The closest city would be Chico