Outlook Integration not working / add-on vs standalone

Hi,
We're on SBO 2007A SP01 PL07. In trying to roll out the O/I add-on, the built-in file did not work on workstations (Message: Cannot start Add-on) but does on the server.
The OI server install worked and in using the server as client workstation, OI the add-on works (don't get the above message).
Successfully installed the standalone file on workstations but then the snapshot templates aren't accessible... if they are, please advise how to do this.
Otherwise, any help in getting the basic add-on install file to work on the workstations, that would be great.
Thank you,
Heather
Edited by: Heather Wilkinson on Feb 11, 2010 10:32 AM

Hi,
Solution: turned off the UAC on Vista workstations and the core add-on version (not standalone) kicked in.
Heather

Similar Messages

Outlook Integration Not working

Hi
we are using SAP 8.81 PL5. we upgraded to 8.81 from 8.8. Outlook integration was working fine in the earlier version. But after upgrade whlile connecting it displays message as higher version of outlook is already installed.
I tried uninstalling and reinstalling add-on but it is not working.
Any suggestion for the same since it is affecting usage of users.
solutions will be highly appreciable

Hi Prince......
Go to C:\Program Files\SAP\SAP Business One
And here you find AddOnsLocalRegistration.sbo and AddOnsInstall.sbo
Copy these two files and store it to other drive for safety of other addons running if any.
Now Open AddOnsLocalRegistration.sbo with Notepad and delete the contents in that and then save it.
Then login in sap and then try to run addons through Addon Manager..........
Regards,
Rahul

Exchange Outlook Push Not working, Battery life Tanking, iPhone heats up!

I have seen several posts about this, but nothing that has been able to exactly describe my issue. I have a iPhone 3G on the latest firmware, 3.1.2. I was recently able to add my work exchange email to the phone and it worked fine with SSL disabled. At the time, we had not yet set up security on our OWA. Well that lasted about a week, then they decided to enable the security and since then, my push exchange mail with Outlook has not worked. I tried enabling the SSL feature on the phone and still no dice. As a result, my battery only lasts about 3 hours and the phone's physical temperature heats up. Once I delete the exchange account, the tempreceeds and the battery life returns to normal. I ahve been working closely with our IT guy and we can't seem to figure out what is happening and why it won't sync anymore. I get the error, "cannot get mail, the connection to the server failed" but in the setup, the exchange Account is verified. Any ideas?

Hi, I have just run into the same issue. I was using ver 3.00 on my iPhone 3g up until last night when I upgraded to 3.1.2. Since the upgrade where my phone was successfully connecting to our Exchange 2k3 server and recieving push notifications for mail and calendar etc, this has now stopped. The result now being it will only pull mail on request.
As mentioned in the post above, I have noticed the battery life on my phone has deteriorated significantly, to the point it only lasts a few hours, with almost zero usage.
Please help.

Outlook Integration - Not able to add a BP

Hi All,
when I try to add a new contact in a new BP through Outlook Integration, SAPBO gives this error message:
Errore # -5002 DI API : "Accounts ... is missing OCRD.DebPayAcct"
In "G/L Account Determination" table all accounts are ok, so I don't understand how I can resolve this error.
The strange thing is that Outlook Integration worked well until some time ago and we didn't update nothing!!!
Thanks
Simona

Hi Simona,
You may check this thread first:
Error Code -5002
Thanks,
Gordon

Synching contacts with Outlook does not work

I have a Mac (with the contacts application), an iPhone and an iPad as well as an iCloud account. Synching contacts between all 4 of them works perfectly. However, synching contacts with Outlook 2011 does not work anymore. It used to, then I had some trouble with the synching with the iCloud (due to the fact that I had to change the Apple ID from the one I use for iTunes to the one I use for the Cloud), and since then contacts do not replicate with Outlook anymore. I can deactivate and reactivate the synching in Outlook as much as I want, no change.
Any ideas? Thanks!

So it sounds like you have contacts from multiple mail accounts syncing to/from your iPhone. They will all appear there as long as their respective accounts are checked under contacts/groups(upper left of contact screen).
As far as contacts created on the iPhone, if you select Outlook as your default account for contacts, all contacts created on the iPhone will sync with Outlook. I'm assuming your Outlook syncs with an Exchange Server.
You could connect the iPhone to iTunes and sync all of your contacts to say, a desktop version of Outlook. You could then import that set of contacts into the Exchange version of Outlook.

Msa 50sp6: outlook integration not possible

Hello forum,
while installing msa50sp6 with outlook integration,
I do not get any buttons/tabs into my outlloók 2002.
No errors while installing. (outlook is closed while installing).
Is it possible to install the outlook sync. manual ?
Or has anybody a solution why this is so ?
Best regards
Gerd

Hi,
Note 1047775 - 5.0 Installation the Groupware-Synchronisation
rg,
markus

Outlook 2007 not working

For years I have used outlook 2007 for downloading my email from my btopenworld.com account. Today it seems to be not accepting my username and password and I keep getting send/receive errors. I have tried deleting the account from outlook and setting it up again using the POP3 settings I found on this site but it is still not working. Can anyone help me please?
The server information is POP3 and mail.btinternet.com for incoming and outgoing. my username is the same as my email address, so [email protected] and the box to require logon using SPA is not ticked.
Thanks
Solved!
Go to Solution.

Have you tried using @btinternet.com instead? They are interchangable, so you can still get mail from your @btopenworld.com if you use @btinternet.com.
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

OIM-OAM 11g BP 02 integration not working as expected

Hi Experts,
We have OIM 11g and OAM 11g both upgraded to BP02 installed on separate hosts. We are using OID 11g as the directory servers and OVD 11g fronting OID for integration. We followed the steps mentioned in Oracle Document Oracle® Fusion Middleware Integration Guide for Oracle Access Manager 11g Release 1 (11.1.1)Part Number E15740-04 for integration purpose.
After performing all the integration tasks mentioned in the document, while testing the ingtegration, the expected results are not been serverd.
If I access OIM admin console URL, am getting default OIM admin console URl instead of OAM SSO login page for authencation. and also I am unable to login using either xelsysadm\oimadmin\oamadmin but I can login using weblogic, so this is referin to the default embeded LDAP of weblogic for credential validation.
OIM and OAM are deployed on separate hosts, please find the deployment details below.
1. JDK: 1.6.0_29
2. WLS : 10.3.5
3. LDAP: Oracle Internet Directory: 11.1.1.5.0
Oracle Virtual Directory: 11.1.1.2.0
4. Webserver: Oracle HTTP Server fronting the OIM
The Integration videa on Support.oracle assumes that all components OIM\OAM/OID/OHS being on the same host.
I have my OIM and OAM both patched to the latest BP which is BP 02. There is a support article which specifically talks about few settings ton be made for BP 02.
the article ID is 1447494.1.
Even after doing all these, the integration is not working.
As per the support article, I need to use preferred host name for agent fronting OIM as IAMSuiteAgent and if I do that, the proxying of OIM server with the webserver host will not work at all and ends with 404 not found error when I access using http://OHShost:OHSport/oim.
but if i use the name of agent i.e webserver name in the preferred host field, the redirection would happen and i get OAM SSO login page for authentication, however with the credential validation at this page, the OIM login page (http://OIMhost:OIMport/oim) is provided prompting for login again.
also if i access OIM login page http://OIMhost:OIMport/oim directly, the OAM SSO page is not coming for authentication.
I am awaiting your advice\suggestions or workarounds if any one has come across this kind of issue, which i am sure is an obvious case.
Thanks,
Nagendra

Hi,
Any help in this regard please/
Thanks
Nagendra

Siebel - BIP Integration not working

Hi,
We are currently integrating Siebel 8.0.0.8 and BIP 10.1.3.4.1. Siebel - BIP Integration is not working. When we try to upload reports from Report Template Registration view, following error messages are displayed:
[1] [0] Operation '<?>' of Web Service '<?>.<?>' at port '<?>' failed with the following explanation: "<?>".(SBL-EAI-04308) (IDS_EAI_WS_OD_FAULT)
[2] Object manager error: ([0] Operation '<?>' of Web Service '<?>.<?>' at port '<?>' failed with the following explanation: "<?>".(SBL-EAI-04308) (IDS_EAI_WS_OD_FAULT))
[3] Error (null) invoking method "(null)" for Business Service "(null)"
In the XMLP log, following are the details for this transaction:
EAITransport     EAITransportDebug     4     000000624c512bf8:0     2010-07-29 14:13:51     *** HTTP Transport Parameters:
EAITransport     EAITransportDebug     4     000000624c512bf8:0     2010-07-29 14:13:51     Request URL = http://167.238.136.65:9705/xmlpserver/services/PublicReportService_v11
EAITransport     EAITransportDebug     4     000000624c512bf8:0     2010-07-29 14:13:51     Request Method = POST
EAITransportPerf     EAITransportPerf     5     000000624c512bf8:0     2010-07-29 14:13:51     Created Request Connection|0
EAITransport     EAITransportGeneric     3     000000624c512bf8:0     2010-07-29 14:13:51     Sending Request
EAITransport     EAITransportDebug     4     000000624c512bf8:0     2010-07-29 14:13:51     *** HTTP request Headers for Data Send Request:
User-Agent: Mozilla/4.0
Accept: text/*
SOAPAction: ""
Connection: close
Content-Type: text/xml; charset=UTF-8
EAITransport     EAITransportDebug     4     000000624c512bf8:0     2010-07-29 14:13:51     HTTP response Headers from Data Send request HTTP/1.1 500 Internal Server Error
Any suggestions??

Hi, I'm getting something very similar when trying to upload standard OR custom reports. I have an SR open with Oracle currently. I'll let you know what I find out. Does anyone else have a suggestion?
ObjMgrLog,Error,1,000002ee4c762608:0,2010-08-26 10:39:06,(httptransport.cpp (1631)) SBL-EAI-04117: HTTP Request error during 'Submitting Data SendHTTP request': 'Status code - 500'
ObjMgrLog,Error,1,000002ee4c762608:0,2010-08-26 10:39:06,(httptransport.cpp (981)) SBL-EAI-04117: HTTP Request error during 'Submitting Data Send HTTP request': 'Status code - 500'
ObjMgrLog,Error,1,000002ee4c762608:0,2010-08-26 10:39:06,(soapbinding.cpp (564)) SBL-EAI-04304: Unknown Part ':oracle.apps.xdo.webservice.exception.OperationFailedException' for operation 'uploadReport' exists in SOAP message.
ObjMgrBusServiceLog,Error,1,000002ee4c762608:0,2010-08-26 10:39:06,(outdisp.cpp (214)) SBL-EAI-04308: Operation 'uploadReport' of Web Service 'http://xmlns.oracle.com/oxp/service/v11/PublicReportService.PublicReportServiceService' at port 'PublicReportService_v11' failed with the following explanation: "oracle.apps.xdo.webservice.exception.OperationFailedException: PublicReportService::executeUploadReport Failure: Due to unable to create new Report as AbsolutePath [SiebelCRMReports/Quote - Standard/Quote - Standard.xdo] due to java.util.zip.ZipException: error in opening zip file".
ObjMgrBusServiceLog,Error,1,000002ee4c762608:0,2010-08-26 10:39:06,(xmlpadaptersvc.cpp (1544)) SBL-EAI-04308: Operation '<?>' of Web Service '<?>.<?>' at port '<?>' failed with the following explanation: "<?>".
ObjMgrBusServiceLog,Error,1,000002ee4c762608:0,2010-08-26 10:39:06,(xmlpdriversvc.cpp (567)) SBL-EAI-04308: Operation '<?>' of Web Service '<?>.<?>' at port '<?>' failed with the following explanation: "<?>".
GenericLog,GenericError,1,000002ee4c762608:0,2010-08-26 10:39:06,Object manager error: ([0] Operation '<?>' of Web Service '<?>.<?>' at port '<?>' failed with the following explanation: "<?>".(SBL-EAI-04308) (IDS_EAI_WS_OD_FAULT))
GenericLog,GenericError,1,000002ee4c762608:0,2010-08-26 10:39:06,( (0) err=2818155 sys=2298068) SBL-OMS-00107: Object manager error: ([0] Operation '<?>' of Web Service '<?>.<?>' at port '<?>' failed with the following explanation: "<?>".(SBL-EAI-04308) (IDS_EAI_WS_OD_FAULT))
GenericLog,GenericError,1,000002ee4c762608:0,2010-08-26 10:39:06,(bsvcmgr.cpp (1384) err=2818251 sys=0) SBL-OMS-00203: Error 2298068 invoking method "GenerateReport" for Business Service "XMLP Driver Service"
GenericLog,GenericError,1,000002ee4c762608:0,2010-08-26 10:39:06,(bsvcmgr.cpp (1227) err=2818251 sys=0) SBL-OMS-00203: Error 2298068 invoking method "GenerateReport" for Business Service "XMLP Driver Service"
GenericLog,GenericError,1,000002ee4c762608:0,2010-08-26 10:39:06,(smireq.cpp (425) err=2818251 sys=0) SBL-OMS-00203: Error 2298068 invoking method "GenerateReport" for Business Service "XMLP Driver Service"
TaskConfig,TaskCfgParamError,1,000002ee4c762608:0,2010-08-26 10:39:06,***********Dumping Parameters for the current task (22020129) because of errors**********

Redirect emails in OWA and Outlook 2010 not working in Exchange 2013

I have an new install of Exchange 2013 with all updates.
When I setup an inbox rule to redirect messages to another contact it is not working.
When I used Outlook 2010 and ran the rule manually I received this error:
"the redirect action is not currently supported with run rules now"
It seems that I didn't setup up something correctly in Exchange 2013 or a feature is not turned on. Please assist.
In the EM console when I setup forwarding that is working. Its the inbox rule redirect not working.

Hi,
From your description, I recommend you use the following cmdlet to ensure that the DeliverToMailboxAndForward parameter is set to $True.
Get-Mailbox <identity> | fl DeliverToMailboxandForward
If this parameter is false, you can use the Set-Mailbox cmdlet to set it and check the result.
Hope this can be helpful to you.
Best regards,
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Amy Wang
TechNet Community Support

Disabled Email Account Sent feature in outlook is not working

In outlook, is easy to setup one email account just to receive emails.
Example:
Account A receive/send emails
Account B receive only.
This is easily setup by configuring the send/receive groups (link: http://smallbusiness.chron.com/remove-send-account-outlook-2012-67137.html)
But this is not working! I configured account B to receive only and I can send emails using Account B without any problems. Any idea? This is driving me crazy! I tested in 3 different computers with the same results.
Any ideas?

When you change the S/R group, you just tell it not to use that account in the group. You need to 1) use a fake SMTP server and 2) set the account in any and all S/R to not send mail (to avoid error messages). I have steps and screenshots for a
send only POP3 here - use the same method for receive only pop3, with the servers and settings reversed.
Diane Poremsky [MVP - Outlook]
Outlook & Exchange Solutions Center
Outlook Tips
Subscribe to Exchange Messaging Outlook weekly newsletter

New Lync 2010 Deployment With OWA 2010 Integration Not Working

I just installed Lync 2010 and it works fine with the Lync 2010 client.
Our Exchange Server is Exchange 2010 SP3 and I can't get the OWA integration to work.
I found various blogs with instructions, but they are all so old that I'm not sure all the prerequisite software hotfixes downloads they are pointing to install are still valid for Exchange 2010 SP3 and the Lync 2010 with all the latest updates.
For a little while I got it partially working in OWA where some of the Lync integration was showing, but it was grayed out and the contacts lists would never load. Now that I have tried several solutions, it no longer even partially works.
I think I need to clear all the integration settings from both Exchange and Lync, so I can start over with valid instructions.
What are the current instructions and current download files needed with the most up to date versions of Lync 2010 and Exchange 2010?
I also need to make sure that the syntax of the all the server and certificate names the various commands and wizards ask for are exactly correct. Some of it is confusing on whether it is the actual DNS name, Exchange certificate SAN name or something
else.

TL_ERROR(TF_CONNECTION) [0]0878.0AC8::09/21/2014-19:27:55.515.000002d3 (SIPStack,SIPAdminLog::TraceConnectionRecord:SIPAdminLog.cpp(160))$$begin_record
LogType: connection
Severity: error
Text: The peer is not a configured server on this network interface
Peer-IP: 192.168.1.61:23952
Transport: TLS
Result-Code: 0xc3e93d6a SIPPROXY_E_CONNECTION_UNKNOWN_SERVER
Data: fqdn="domain.local"
$$end_record
TL_INFO(TF_PROTOCOL) [0]0878.0AC8::09/21/2014-19:28:36.289.00004a73 (SIPStack,SIPAdminLog::TraceProtocolRecord:SIPAdminLog.cpp(125))$$begin_record
Trace-Correlation-Id: 592054086
Instance-Id: 0000005B
Direction: outgoing;source="local"
Peer: 192.168.1.101:50734
Message-Type: response
Start-Line: SIP/2.0 401 Unauthorized
From: <sip:[email protected]>;tag=2b027e1110;epid=a25bafc9cb
To: <sip:[email protected]>;tag=54ADDA87F5DF7E9514FA2FACDF01EBC1
CSeq: 1 REGISTER
Call-ID: ccb79e71bef84e2084502ffbd63115ad
Date: Sun, 21 Sep 2014 19:28:36 GMT
WWW-Authenticate: NTLM realm="SIP Communications Service", targetname="Lync2010.domain.local", version=4
WWW-Authenticate: Kerberos realm="SIP Communications Service", targetname="sip/Lync2010.domain.local", version=4
WWW-Authenticate: TLS-DSK realm="SIP Communications Service", targetname="Lync2010.domain.local", version=4, sts-uri="https://Lync2010.domain.local:443/CertProv/CertProvisioningService.svc"
Via: SIP/2.0/TLS 192.168.1.101:50734;ms-received-port=50734;ms-received-cid=B00
Server: RTC/4.0
Content-Length: 0
Message-Body: –
$$end_record
TL_INFO(TF_PROTOCOL) [0]0878.0AC8::09/21/2014-19:28:36.304.000051a6 (SIPStack,SIPAdminLog::TraceProtocolRecord:SIPAdminLog.cpp(125))$$begin_record
Trace-Correlation-Id: 592054086
Instance-Id: 0000005D
Direction: outgoing;source="local"
Peer: 192.168.1.101:50734
Message-Type: response
Start-Line: SIP/2.0 401 Unauthorized
From: <sip:[email protected]>;tag=2b027e1110;epid=a25bafc9cb
To: <sip:[email protected]>;tag=54ADDA87F5DF7E9514FA2FACDF01EBC1
CSeq: 2 REGISTER
Call-ID: ccb79e71bef84e2084502ffbd63115ad
Date: Sun, 21 Sep 2014 19:28:36 GMT
WWW-Authenticate: TLS-DSK opaque="2068882F", gssapi-data="FgMBCWUCAABNAwFUHybk5YL8BIG6/hEQ8Ho3vB2JmvRbl5XJKZwxAM+FWCDVMQAAt9DcOnkWE+JUcGJjlZfh78cGOcAxLv/yU9+cmQAvAAAF/wEAAQALAAXqAAXnAAXkMIIF4DCCBMigAwIBAgIKYUQCVgAAAAAABjANBgkqhkiG9w0BAQsFADBHMRUwEwYKCZImiZPyLGQBGRYFbG9jYWwxFjAUBgoJkiaJk
TL_INFO(TF_PROTOCOL) [0]0878.0AC8::09/21/2014-19:28:36.367.0000785c (SIPStack,SIPAdminLog::TraceProtocolRecord:SIPAdminLog.cpp(125))$$begin_record
Trace-Correlation-Id: 2754735576
Instance-Id: 00000063
Direction: outgoing;source="local"
Peer: 192.168.1.101:50734
Message-Type: response
Start-Line: SIP/2.0 403 Location profile only available when UC enabled.
From: <sip:[email protected]>;tag=60cf26eaec;epid=a25bafc9cb
To: <sip:[email protected];gruu;opaque=app:locationprofile:get;default>;tag=54ADDA87F5DF7E9514FA2FACDF01EBC1
CSeq: 1 SERVICE
Call-ID: b01cbdd5693c4bbbb4c013d87a6a51eb
Authentication-Info: TLS-DSK qop="auth", opaque="2068882F", srand="2A6F42FF", snum="2", rspauth="aec4e7a2404bbb46a0d55c9b42d3631cc36df614", targetname="Lync2010.domain.local", realm="SIP Communications
Service", version=4
Via: SIP/2.0/TLS 192.168.1.101:50734;ms-received-port=50734;ms-received-cid=B00
ms-diagnostics: 2;reason="See response code and reason phrase";AppUri="http://www.microsoft.com/LCS/TranslationService";source="Lync2010.domain.local"
Server: RTC/4.0
Content-Length: 0
Message-Body: –
$$end_record

Outlook is not working on my macbook!

Outlook/hotmail is not working at all, it diverts me to the 'mobile version' or when it does let me into it properly when i open an email nothing actually shows up. The message is saying that I need to upgrade Safari but I have just recently upgraded to snow leopard and no updates are available, does anyone know how to fix this???

try using a different browser like mozilla firefox - if it works with firefox - then safari is the issue

Lync integration not working after Exchange 2013 SP1 is installed...

Hi,
I have two Exchange 2013 servers running and everything is fine, almost.
The problem is that on the first server we had OWA with Lync integration working before installing SP1, but after the installation of SP1, it doesn't Work any more.
The second server was installed with SP1 from the start, but we can't get the Lync integration to Work on this one either..
When we log in to OWA, it just starts to sign in but then says "there was a problem signing in, if this continues please contact your helpdesk"
I have checked the Exchange server for events, and i can see the event ID 112 everytime i recycle the Application Pool, so there are some connection between Exchange and Lync..
Have any of you Guys seen or experienced any thing like this?
Thanks in advance.
Regards
Kenneth

Hi,
I recommend that you refer to the following article to troubleshoot the issue:
Troubleshooting tips for Exchange 2013 OWA IM Integration to Lync 2013
This post describes how to configure Exchange 2013 OWA to have IM integration to Lync 2013. Here I would like to give some troubleshooting tips in case you can't get the integration to work.
In addition, here is a similar thread for your reference:
Lync 2013 with Exchange 2013 SP1 OWA integration failed
Hope this helps!
Thanks.
Niko Cheng
TechNet Community Support

SSO to Web App using Application Integrator - not working (SP15)

Hi,
I have created a web app system and generic app integrator iview for my web application (and set up user mapping etc.), following the Application Integrator how-to guide but it does not log me into my web application. I have got the Yahoo example working, and if I use a HTTP System & URL iview for my web application, that also works. Can anyone tell me what the problem could be, or where I should start looking?
If I use a http sniffer, I can see the correct URL and parameters in the following:
function requestTargetURL() {
      var theURL = "<b>HTTPS://(myserver)/log-in.htm?op=(####)&pwd=(####)</b>";
      var dsmObj;
      if (hasNestedFrameStructure()) {
        location.replace(theURL);
        dsmObj = parent.EPCM.DSM;
      } else {
        document.body.scroll = "no"; // for IE only
        var theIframe = document.getElementById("iframe_GETRedirect_592312569");
        theIframe.style.visibility = "visible";
        theIframe.src = theURL;
        dsmObj = EPCM.DSM;
        document.title = 'JDS';
    function onloadhandler(){
      setTimeout("requestTargetURL()",1);
but something else must be happening for it not to work. Can anyone give me any pointers?
Many thanks
Jane

Bit of a weird one: I've found a way to make it work but I'm not sure exactly how... the problem was that the portal was opening my web app URL in an iFrame (which can be seen from the code above). I tested this by just creating a html page with the URL + parameters in an iframe, and it wouldn't log me in (and took over the whole browser). So I guess the problem is with my web app rather than the portal.
However... I then discovered that if I add my web app address to the Local Intranet security zone in my browser (IE6) settings (before it was in the Trusted Sites zone), it no longer minded being in an iFrame, my test html page worked and so does the portal iview. I cannot find which security setting is causing this - I've tried changing the Trusted Sites to match the Intranet zone settings exactly, but it still doesn't work if my web app address is Trusted opposed to Intranet.
If anyone has any idea what is causing this behaviour, I'd be very grateful - obviously it isn't a portal issue but I'd still like to find out the cause in case it comes up again in the future.
Many thanks,
Jane

Outlook Integration not working / add-on vs standalone

Similar Messages

Maybe you are looking for