Outlook is running to slow for terminal server users

All tried but no luck .thanks

Outlook is running to slow for terminal server users and very slow updating inbox. Can anyone suggest how can i increase speed for the users ?
Office 2013
exchange 2010
This topic first appeared in the Spiceworks Community

Similar Messages

  • Adding another exchange account Outlook 2013 Pro Plus for terminal Server users

    Really hoping someone can offer some advice on this one as I have wasted far to many cycles trying to figure this out.
     Company I work for recent purchased another company and we are in the process of bringing them into our network.  They currently run a a 2008 R2 terminal server where all users connect to for there day to day work.  A number of applications
    are installed including Office 2013.
    All users have Outlook 2013 configured to access their exchange server for email and this works fine.
    The first step in bringing them into our fold is to add an email account for Our Exchange  server without removing their existing exchange configuration or Outlook Profile.  So the one profile will have both exchange accounts listed and they can
    continue to get email from their server but as well email from our domain.
    I created a MSP file and tested pushing this out using PDQ Deploy to a few workstations here in our office and it works fine.  I then started to work on deploying in their environment.  PDQ Deploy will not work as they are all terminal Services
    Clients.  So I tried to push out via GPO.  I created the GPO Initially wanting to use a package and apply that GPO to an AD group.  However it will not let me deploy a MST as a package.  So I then tried moving it to a script that would
    run at logon.  That too is not working.
    I know I could enter install mode then run the MSIEXEC.EXE \config.MSP but that takes away the ability to control the role out.
    Any other ideas on how to get this done.

    Using the MSPfile method would require the logged-on user to have the necessary Windows permissions to run setup.exe, and on an RDS/TS Session Host, that's not likely to be available. (since it's not a great idea to give end-users those permissions on a
    shared system like RDS/TS)
    But you might be able to do it with a PRF file and an Outlook launch command, like this?
    http://technet.microsoft.com/en-us/library/cc179062(v=office.15).aspx
    Don
    (Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
    This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

  • Deploy an MSI for Terminal server users

    Hello,
    I have faced with the issue which I can't resolve on my own - the MSI is not run when the user logs on. Moreover, I don't see the GPO applied in the Group Policy Results for the user:
    Here is what I did on the server side:
    1. Created a separate OU for testing (actually, it doesn't work if I apply a policy at the domain level).
    2. Created a test user account.
    3. Created a shared folder (Read for everyone). Made sure that an user can read files from that folder.
    4. Placed the msi file in the shared folder. Before doing that, I tested the installer in the fields running the "msiexec.exe /i /s" command.
    5. Created a new Group Policy object where I added a new software installation at the User Configuration node. I specified the filepath in the following format -
    \\server\folder\msifile . Assigned. Chose the
    Install this application at logon. Maximum (User Interface).
    6. Linked the GPO to the OU where the user resides.
    7. The Settings in the GPO apply only for the specified user. Also I checked permissions on the Delegation tab for the user - Read / Apply Group Policy are selected.
    Here is how it looks like:
    Most probably I tried to adjust some properties for troubleshooting. But nothing helped.
    When I logon as a domain user I see that the GPO was applied successfully (gpresult.exe confirms). But I don't see any installation wizard, nor MSI installed. The result is shown on the first screenshot.
    I even don't get any errors in the Group Policy log. I have a feeling that user settings in my GPO are ignored by the system. Why does it happen? Is there any setting I missed setting up a new GPO?
    P.S. I have tried turning on various Group Policy settings located in the Administrative Templates / System / Group Policy.

    Hi Eugene,
    Based on your description, to make sure that this is not caused by fast logon optimization feature, we can enable the following setting:
    Computer Configuration\Administrative Templates\System\Logon\ Always wait for the network at computer startup and logon
    After enabling this setting and updating the policy, we can try logging off and logging on again to see if it works.
    Regarding fast logon optimization, the following article can be referred to for more information.
    Description of the Windows Fast Logon Optimization feature
    http://support.microsoft.com/kb/305293/en-us
    Hope it helps.
    Best regards,
    Frank Shen

  • Logon rejected for Unable to obtain Terminal Server User Configuration. Error: Not enough resources are available to complete this operation.

    Error: Logon rejected for  Unable to obtain Terminal Server User Configuration. Error: Not enough resources are available to complete this operation.
    The problem is that the SharePoint server will
    function just fine for a week or so and then suddenly when a new user tries
    to log on they get an error message indicating that not enough resources areavailable to
    log them on and also user will to credential prompt while accessing share point site . 
    Raj

    Hi,
    According to the error message, please use performance monitor to diagnose if it is a memory-related bottleneck and you can use the counters of the memory part in the article below:
    https://technet.microsoft.com/en-us/magazine/2008.08.pulse.aspx
    In addition, it may be due to thousands of open connections to the server are in a TIME_WAIT state. You can run "netstat -an" command on the affected server and client. If you see mutiple connections in the TIME_WAIT state, you can follow the article
    to increase the number of TCP/IP connections:
    https://msdn.microsoft.com/en-us/library/ee377084(v=bts.70).aspx
    Furthermore, if you are running windows server 2003, please make sure that you have installed the KB 948496 and stop all services that you don't need.
    Best regards,
    Susie
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

  • Compile problem running jdev on Windows Terminal Server

    I am experiencing problems compiling java source files in jdev 9.0.3.1035
    Sometimes the class file is not created if i make (compile) only one source file.
    The jdev is running on a Windows Terminal Server 2000.
    The sources are on the same Terminal Server.
    The classes should be compiled to the Terminal Server as well.
    I am working on a Terminal session elsewhere.
    Anyone had this problem before ?

    Georg:
    Q1) What you mean with 'the class file is not
    created'? Is the .class file not overwritten? Is the
    class file for a new file not written? Did you delete
    the class file before compiling?I deleted the class file before compiling!
    Q2) I guess that sources and classes are used by you
    exclusively. Is this right?That is right!
    Q3) In the project settings under Common | Input
    Paths is the option 'Scan Source Path' enabled or
    disabled?Both options have the same effect!
    Q4) When the problem occurs: what is the active
    window (code editor or Navigator)? What node is
    selected in the Navigator?Tried following combinations:
    - Having selected the Project node in the Navigator and the code editor is active window
    - Having selected the class node in the Navigator and the code editor is active window
    - Having selected the Project node in the Navigator and the Navigator is active window
    - Having selected the class node in the Navigator and the Navigator is active window
    Q5) What are the exact steps you took when it
    happens? Do you use mouse or keyboard hotkeys? What
    buttons or menus do you use?- right click in code editor and choose Make from popup menu
    - right click on Long postings are being truncated to ~1 kB at this time.

  • Adobe Illustrator in out Terminal Server environment. How is the licensing work for Terminal Server installations?

    Adobe Illustrator in out Terminal Server environment. How is the licensing work for Terminal Server installations?

    You can find all forums here:
    https://forums.adobe.com/welcome

  • Group Policy design for Terminal Server

    Hi, I am mixed about group policy design for Terminal server
    My Infrastructure is so;
    Zone
          ->Department
                       ->User
                       ->Computers
          ->Department
                       ->User
                       ->Computers
          ->Department
                       ->User
                       ->Computers
    Server
           ->OtherServer
            ->TerminalServer (TerminalComputersGPO)
    I create two group policy for user and for terminal server computers (security filtered for Terminal_Users)
    I want to use terminal server user policy but it must effect
    just in terminal computers. not TS user's computers. what i must do? where i must locate it?
    Please click "Vote As Helpful" if it is helpful for you and "Propose as Answer"

    Hi Davut EREN - TAT,
    According to your description, you would like
    terminal server user policy applying to users which log on to terminal computers. Right?
    As MuhammadUmar's suggestion, you can use Loopback in replace mode. The GPO list for the user is replaced in its entirety by the GPO list that is already obtained for the computer at computer startup.
    In the real work environment Loopback processing of Group Policy is usually used on Terminal Servers. For example we have users with enabled folder redirection settings, but we do not want these folder redirection to work when the users log on to the
    Terminal Server, in this case we enable Loopback processing of Group s Computer account and do not enable the folder redirection settings.
    For more information about this policy, please refer to the following articles:
    Loopback processing with merge or replace
    Loopback processing of Group Policy
    Regards,
    Lany Zhang

  • Safari has been running extremely slow for last 2-3 weeks, and crashing

    I have Mac OS X G5 with operating system 10.4.11.
    My Safari 4.1.3 has been running extremely slow for last 2-3 weeks, and crashing very often.
    I have checked with my internet provider and they said everything looks ok in their end.
    Does anybody know what is going on with safari???

    Hi Rusty,
    Best to start your own topic.
    At the top of this window click: New / Discussion.
    Select  Safari from the pop up window.
    Type in your Subject Line
    Then post your crash report.
    Carolyn

  • Can you run Dreamweaver on a Terminal Server?

    can you run Dreamweaver on a Terminal Server?

    Please see my reply to this thread -
    http://forums.adobe.com/message/2117005#2117005
    PZ

  • Configuring HWIC-8A card for terminal server access

    Hi Friends,
    I have a 3825 router having HWIC-8A async card, and want to cnfigure that for terminal server connectivity. I believe it will have different config to NM-16A module config. any advice please.
    Thanks..
    Arun

    Having them both kills being able to access the Net.Take out the gateway on your loopback adapter and network traffic should happen as normal :)
    Is this configured only in TNSNAMES.ORA, and if so how?It's configured in listener.ora, but changing the port won't change the amount of traffic nor the Oracle load, it will just make everything slightly more confusing to everyone trying to help you troubleshoot your machine ;)
    ~Jer

  • Sequencing for terminal server

    Hi,
    Is there any prereq we should take into account when creating an app for terminal server (Windows 2008 R2)?
    The problem we are facing now is that App-v packages are working correctly for 1 user but others (on the same terminal server) don't see the shortcut. If we copy past the screenshot to their menu it works fine.
    Please advise.
    J.
    Jan Hoedt

    I suppose it's SP1 for SCCM 2012, as this adds App-V 5 support.
    Do you target machines or users in your deployment type? 
    Do you do any 'bad tricks' with the start menu (like redirecting it)?
    Falko
    Twitter
    @kirk_tn   |   Blog
    kirxblog   |   Web
    kirx.org   |   Fireside
    appvbook.com

  • Terminal Server User license file not found or User ID not matched.

    Hi,
    I recently went for the Process Runner, downloaded trial version and wanted to work with Ides system, but at the very first step the system throws the following error:
    "Terminal Server User license file not found or User ID not matched.
    and the details are as follows:
    Process Runner 2008
    Version : 4.20.10
    Supported file version: 7.3
    Current Framework: 2.0.50727.42
    User Name: Demo User
    Licensed  To: Demo Company
    Product Id : PR-ALL-DR-MTH-CU
    Full Version : 4.20.10.9579
    Current UserID : Administrator
    License Type : Evaluation/Demo License
    Evaluation Days : 1 of 30
    Licensed Uses : 5 of 15
    Expiration Date : 12/31/2011
    COMPANY : Demo Company
    MAX_ROWS : 30
    MAX_THREADS : 3
    USER : Demo User
    Current Node Id : DAAB-AA43-58DB-00DB-4862
    Max Instances Allowed : N/A
    OS-Office culture info : en-US | en-US | en-US | en-US
    C-Info : en-US
    Computer : SAPSERVER
    Current Domain : WORKGROUP
    OS : Microsoft Windows NT 5.2.3790 Service Pack 1
    AppPath : D:\Vijj downloaded\Process Runner
    MyDocPath : C:\Documents and Settings\Administrator\My Documents\Innowera
    Terminal Server User license file not found or User ID not matched.
    Can anybody guide me please.
    Thanks.

    Hi,
    According to the error message, please use performance monitor to diagnose if it is a memory-related bottleneck and you can use the counters of the memory part in the article below:
    https://technet.microsoft.com/en-us/magazine/2008.08.pulse.aspx
    In addition, it may be due to thousands of open connections to the server are in a TIME_WAIT state. You can run "netstat -an" command on the affected server and client. If you see mutiple connections in the TIME_WAIT state, you can follow the article
    to increase the number of TCP/IP connections:
    https://msdn.microsoft.com/en-us/library/ee377084(v=bts.70).aspx
    Furthermore, if you are running windows server 2003, please make sure that you have installed the KB 948496 and stop all services that you don't need.
    Best regards,
    Susie
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

  • Outlook 2013 in a 2012 r2 Terminal Server environment and crashes after initial setup. It will not launch in safe mode

    I am running terminal server 2012 R2 (RDS environment) In Windows Domain, 8 users across a LAN on a new server.  Outlook 2013 crashes and will not load in safe mode. Outlook allows the initial profile setup and when the configuration is complete, it
    crashes and will not launch or launch in safe mode. I have deleted the outlook profile and reconfigured it.  The problem continues on all user accounts. The firm is not using Exchange and  is using a POP3 account. I have a 13 user Office Volume License
    (per device) and 15 terminal server Licenses ( per user)
    Problem Event Name :      APPCRASH
    Application Name:            Outlook.EXE
    Application Timestamp :   52b0b282
    Fault Module Name :        OUTLOOK.EXE
    Fault Module Version :     15.0.4569.1503
    Fault Module Timestamp:  52b0b282
    Exception Code:                 C0000005
    Exception Offset:                00340b9
    OS Version:                      6.3.9600.2.0.0.16.7
    Local ID :                         1033 
      Any help would be much appreciated.

    follow this instruction to troubleshoot Outlook crash issue:
    http://support.microsoft.com/kb/2652320
    Flynn

  • Error Message Running Application From MS Terminal Server. Ora-01019

    Dear folks
    I had this problem recently and this is the solution to it.
    Applies to:
    Oracle Server - Standard Edition - Version: 10.2.0.2
    Information in this document applies to any platform.
    Goal
    #1. How to solve the ORA-01019 when running an application from terminal services without
    administrative privileges?
    Solution
    There is a MS security option that has to be enabled for the non-administrative users.
    Please grant "Create global objects" to the non-administrative privileges as indicated at:
    http://technet2.microsoft.com/WindowsServer/en/Library/ba351dd0-aaf5-4e1e-b7dc-10a514842a0a1033.mspx
    "You can configure this security setting by opening the appropriate policy and expanding the
    console tree as such: Computer Configuration\Windows Settings\Security Settings\Local
    Policies\User Rights Assignment\"
    and retry

    Caused By: Error at line:1 col:2  Got character[0] expected a valid XML character
    The character in line 1 col 2 is not a valid XML character. Is the line 1 the XML prolog?
    <?xml version=“1.0” encoding=“UTF-8” ?>

  • Embedded Menu Manager for Terminal Server

    Has anyone use EMM as a nice friendly interface for their terminal server (ie router with NM-16A and octal cables)?
    when I ask the framework to run the following command it gets stuck will a blinking cursor and clear screen
                <IOSExecCommand>"connect 10.1.1.1 2000"</IOSExecCommand>
    however removing the port number allows it to connect fine.
                <IOSExecCommand>"connect 10.1.1.1"</IOSExecCommand>
    same symptom if iI were to replace connect with telnet
                <IOSExecCommand>"telnet 10.1.1.1 2000"</IOSExecCommand>
    even setting up an iphost does the same ie:
                   ip host R1 2000 10.1.1.1
                <IOSExecCommand>"connect R1"</IOSExecCommand>
    All of these commands work fine from the # prompt

    I'm suprised any of these work as they are all interactive commands.  You must be running an earlier version of IOS.  You can only run EXEC commands that will return you to a prompt without user intervention.  Using EMM as a terminal server menu is not going to work.  However, what you could do is have a classic IOS menu call the emm command when one option is selected.  That could take you to a guided menu that allows one to perform additional commands other than connect to device consoles.

Maybe you are looking for