Outlook is working on VLAN but not working on other VALNS

First of all thanks in advance.
here is the scenario :-
(1) 03 VLANS in the network. all VLANS are connected through core L3 switch. No ACLs in L3 switch.
      VLAN 101-192.168.1.0/24
      VLAN 102 - 192.168.2.0/24
     VLAN 103- 192.168.3.0/24
(2) EXCHANGE server 2007 is installed on VLAN 101. (all roles are installed on same server)
(3)  no firewall is configured in network
(4) Network is not connected to Internet.
now my problem is that
(1) outlook Clients in VALN 102 and VALN 103 is not connection (showing exchange server not available). whereas OWA is working fine. user able to send and receive the mails.
(2) all outlook clients on VALN 101 is working fine.
Thanks

Hi,
According to your description, I know that Outlook client VLAN 102 and 103 cannot connect to Exchange server 2007 in VLAN 101, however OWA works well.
Do you use Autodiscover to configure the user account on Outlook which located on VLAN 102 and 103?
How about manually configure user account on Outlook? I suggest try to manually configure the user account for testing. If it works, it seems an issue on the Autodiscover side. Please paste the detailed error message without sensitive information for the
further troubleshooting.
Since you are working on VLAN, please make sure you have insalled the Exchange Certificate which trusted by the CA on both VLAN 102 and VLAN 103.
Thanks
Mavis Huang
TechNet Community Support

Similar Messages

  • The scroll function on my mousepad is disabled when viewing a pdf file in firefox version 5.0. The scroll works on the pdf, but not on the other tabs. When the pdf is closed, the scroll function returns to normal. Any ideas?!

    The scroll function on my mousepad is disabled when viewing a pdf file in firefox version 5.0. The scroll works on the pdf, but not on the other tabs. When the pdf is closed, the scroll function returns to normal. Any ideas?!

    Hey thanx for the help, it worked like a charm.
    I think firefox changed the application lay out, as I used to be able to choose my PDF opener from the list at " Adobe Acrobat Forms Document' where I could choose Nitro-PDF reader, but it has now moved all the way to the bottom like you suggested to the obvious place of "Portable Document Format" section.
    If someone didn't tell me , I wouldn't have scrolled all the way down to be able to find it... it really should be with all its cousins up the top...
    Cheers again..

  • (PDWordGetAttrEx(pdWord, 0) & WXE_LAST_WORD_ON_LINE) is working in one document but not in any other

    Hello,
    I am using (PDWordGetAttrEx(pdWord, 0) & WXE_LAST_WORD_ON_LINE) to get the line breaks in a pdf document. I'm getting the correct results on the plugin_apps_developer_guide.pdf (The reference guide for plugin development to Adobe Acrobat), but not on any other pdf document. I've tried the code on both tagged and un-tagged document, but only this document is giving me the right result.
    Can anyone please guide me what can be the possible reason in this and how this can be handled.
    Thank You
    Vaibhav

    Hi Srikanth,
    1. why there is no space between "HR.tblPeople" and "ORDER BY" in your query? I am surprised it works initially.
    dim objcmd as new OledbDataAdapter _
    ("SELECT * FROM HR.tblPeople" _
    & "ORDER BY LastName, FirstName",objConn)
    2. use
    Dim ds As New DataSet()
    Sinclair

  • HELP!! WRT54G2 works for one computer, but not for the other

    I have a WRT54G2 and it is connected to 2 computers. The internet works in one computer, but not on the other. The tech support said i needed to configure it or firmware or something like that. But my product is out of warranty and I really need the internet on the other computer as well. Please Help!!!

    As your one computer is working fine then there is no problem with the router so far...
    The computer which is not working...check the IP Address on that...
    Click Start >> All Programs >> Accessories >> Command Prompt...A black box will appear(Command Prompt)...In the Command Prompt window type ipconfig and press 'Enter'...Look for Ethernet Adapter Local Area Connection IP Address , Subnet Mask and Default Gateway...
    IP Address should be 192.168.1.x, Subnet Mask : 255.255.255.0, Default Gateway : 192.168.1.1 (assuming your router is 192.168.1.1)...
    If you get the above mentioned IP Address, Subnet and Gateway Address then you should ping the Gateway, type ping 192.168.1.1 and press Enter...If it gives you request timed out then disable any firewalls, security softwares on the computer...
    If you get 4 replies then type ping 4.2.2.2 and press Enter, if you get request timed out, then you need to upgrade your router's firmware...If you get 4 replies then type ping yahoo.com and press Enter...If you get replies for Yahoo then you should get the Internet after adjusting the browser settings...
    Adjusting Browser Settings : Open an IE, click Tools >> Internet Options, then delete all files, cookies, history, forms...Goto "Connections", make sure Never Dial a Connection is checked, click on LAN Settings and make sure all the options are unchecked...Once you are done click on O.k...Close the IE and re-open it...
    If yahoo times out then provide static DNS on your LAN Connection...
    Click on the Start button >>> Settings >>> Control Panel >>>Network Connections- Right click on the icon for Local Area Connection and go to properties- On the 'General' tab select 'Internet Protocol TCP/IP' and click on the Properties button- Select 'Use the Following DNS Settings' Preferred DNS 4.2.2.2 Alternate DNS - 192.168.1.1>>Click on Ok button to Save and Click on "Close" on main Properties window...You should be able to go online...

  • 2 different iphones have the same Apple ID, how can I change the apple ID on one of them but not delete the other iphone's data and media?

    2 different iphones have the same Apple ID, how can I change the apple ID on one of them but not delete the other iphone's data and media?

    You don't have to do anything with the first iPod that you don't use anymore. If you are planning on keeping it, put in a drawer in your house and forget about it.
    You don't need a second account to use with the new iPod. I use one Appl e ID and iTunes library for two iPods, and two iPad. I have different content on all four devices. You can select exactly what you want to sync to each device and it can be different content on all devices.

  • How can I set Firefox 8.0 to accept 3rd party cookies ONLY from selected sites but NOT from any other sites?

    I do not like to accumulate 3rd party cookies and would simply not check the Accept 3rd Party Cookies box in Preferences. BUT in order to use my bank's web page I have to accept 3rd party cookies from a separate site that manages some of their transactions (like paying bills). This means I have to accept 3rd party cookies and then delete them by hand OR I have to check the accept box each time I use the bank's website and then uncheck it when I am done.

    Thanks, but that is not what I was trying to do. I do not want to block cookies from a single site. I do not want to block all 3rd party cookies.
    What I want to do is ACCEPT 3rd party cookies only from ONE site but NOT from any other site.

  • ITunes said my iPod Nano 4G is corrupted when it's in one USB port, but not in the other.

    iTunes said my iPod Nano 4G is corrupted when it's in one USB port, but not in the other. Is the port faulty? Windows 7 PC

    Could just be a loose connection or that the cable itself is going bad.  There are a number of factors that could play into this scenario.
    B-rock

  • Using QuickTime Pro with an .mpg movie, why can I only get it to play from the beginning, but not from any other point in the video?

    Using QuickTime Pro with an .mpg movie, why can I only get it to play from the beginning, but not from any other point in the video? How can I fix this?
    Baffled in SB

    What format of MPG is this?  Is this an MPEG1 or MPEG2 video?  How was the video created?

  • The apple coloured ball keeps appearing in photo elements 13 but not in any other programme. I have the latest IMac with plenty storage and ram

    The apple coloured ball keeps appearing in photo elements 13 but not in any other programme including premier elements and organiser. I have the latest IMac  with ample storage and ram

    I believe I have solved the problem.  I have 16mb ram so I went into photo
    preferences and raised to 75% what is available for photo
    I also reduced the cache from 6 to 2.  The last two sessions the coloured
    ball has not appeared.  Hope this might be usefull  to others
    Rgds J McBride
    On Sun, Jan 25, 2015 at 7:15 PM, Barbara B. <[email protected]>

  • How to connect iphone 5 with ipad 2 using Bluetooth? When  I activate Bluetooth both devices search but not listing each other to pair or connect.

    How to connect iphone 5 with ipad 2 using Bluetooth? When  I activate Bluetooth both devices search but not listing each other to pair or connect.

    You can use Photo Transfer App to transfer photos from iPhone to iPad or vice versa using Bluetooth or WiFi
    http://i1224.photobucket.com/albums/ee374/Diavonex/Album%205/3dd129795daebebc4b8 741b057f5f70d.jpg
    http://i1224.photobucket.com/albums/ee374/Diavonex/Album%205/3af5c541040e15e3f6b 3356e4c55cbfc.jpg

  • Thunderbird has just duplicated x 2 every message in my inbox but not in any other folder. It's the fourth time it's done this so how do I get rid of them?

    Thunderbird has just duplicated x 2 every message in my inbox but not in any other folder. It's the fourth time it's done this so how do I get rid of them?
    I've just tried downloading two addons to try and fix this from the forum but one wasn't compatible with Firefox 28 and the other started downloading something very dodgy to do with .xpi file converters.
    So any help would be great, thanks.

    first you have an anti virus problem... duplicated message almost always occur through one of two reasons. Anti virus program barfs on a message (relatively common) Server side message corruption (becoming more common, particularly at Yahoo)
    Turning off anti virus checking will generally allow the message that causes the issue to download. logging into the webmail portal and deleting what you think looks like the "next" message to download will usually fix corruption that causes duplication of downloads.
    Now to the cleanup.
    This add-on should do that for you https://addons.mozilla.org/en-US/thunderbird/addon/remove-duplicate-messages-alte/?src=search

  • PS4 working on one T.V, but not on the other. Everything I do will not work.

    Exactly as the title says, very annoyed as it will not work the television I want, which is also my computer screen in my bedroom. Tried everything and there is still no picture, but it works fine on my T.V downstairs. It will NOT boot in Safe Mode either. Please help as this is driving me fricking nuts!

    Same problem here...Tested on my Samsung 24' LED and it works but not on my main TV a Samsung 50" Plasma:-( This sucks....BIGTIME!!! Also the 50" Plasma has the latest software/firmware already. As with others my PS3 is still working perfectly fine with the exact same 50" Plasma but NOT the PS4! SONY please help! ...now that you are aware of this problem can you please assist?  ...is there a fix being worked on for this?  Thinking the only option might be to return the PS4 and get the Xbox rather than buy a new TV....

  • HitTestObject works for one mc but not for the other

    Hi - I have given instance names to two movieclips for "bee" and "energy". When I sling the "ball" up and it hits the bee all the code executes but when I sling and hit the energy nothing happens. Thanks for any help.
    function onMyEnterFrame(evt:Event):void
                                  bee.x +=1;
                        if (bee.hitTestObject(energy))
                                trace("energy");
                                //beeHit=true;
                                energy.visible = false;
                                power.x = energy.x
                                power.y = energy.y
                                this.addChild(power);
                        if (bee.hitTestObject(ball) && beeHit==false)
                                trace("gotcha");
                                beeHit=true;
                                bee.visible = false;
                                pop_mc.x = bee.x
                                pop_mc.y = bee.y
                                this.addChild(pop_mc);

    You might be experienciung some confusion with your names in the coding.  I don't see anywhere where ball is checked for a hitTest with energy... the first conditional tests if bee hits energy, not ball.

  • Outlook 2010 - Can fwd form but not reply

    If I send an outlook form to myself I'm able to foward it but unable to reply.
    I get "You don't have appropriate permission to perform this operation" message.
    In the action tab I have the same for Reply, Reply to All and Forward and all are enabled.
    Any ideas ?
    Thx
    Matt

    Hello Matt,
    Please take a look at the similar forum threads:
    Outlook 2010 you don’t have appropriate permission to
    perform this operation.
    You do not have appropriate permission
    to perform this operation
    Finally, I'd recommend asking
    non-programming questions on the
    Outlook IT Pro Discussions or
    Microsoft Answers forums.

  • I cannot send email from Outlook 2011 (for Mac). But can send from other applications

    I have Outlook 2011 for Mac - I have validated the settings and up until yesterday could send and receive emails using my .mac account.
    I can send using icloud and mail (I use Outlook for work purposes) and can send in outlook using my work accounts.
    My settings
    Incoming server - imap.mail.me.com
    Use SSL to connect checked.
    Outgoing server - smtp.mail.me.com
    override default port checked (port 587)
    use SSL to connect checked
    authentication - Username and password.
    I have rebuilt the database - no effect.
    I continue to get the error
    "Mail could not be sent
    The server for account "mac" returned the error. 5.7.8. Bad Username or password (Authentication failed..)" Your username/password or security settings may be incorrect. Would you like to try rentering your password"
    I have validated my username and password and rentered them both.
    I have emptied the outbox and retried but nothing works.
    Thanks for the help.

    Update - I now have it working.
    am not really sure what exactly fixed it.
    I changed a lot of things but my setup now has the following which I think fixed.
    outgoing server  - p06-smtp.mail.me.com
    override default port checked - port now 587
    on more options button changed it to "use incoming server info".

Maybe you are looking for