Outlook issue - How to transfer data to new identity?

Outlook on my MacAir keeps shutting down, so I cannot access my e-mails at all. I tried rebuilding the Identity database but no impact, I also repaired the preferences. When I create a new identity and then open Outlook, it looks ok. Now how do I access all the data that was in my previous "main" identity?
Spent a frustrating day today trying everything on the forums, but no luck. Appreciate any help here.

jessicaellenc wrote:
I know... but there has to be a way to do it without needing to upgrade. I was able to do it before, but don't remember how. So I know there's a way.... I wish I knew it though...
It's been awhile since I messed with this, but try opening Migration Assistant on the newer Mac.

Similar Messages

How to transfer data from NEW mac to OLD?

I want my Macbook Pro, gotten around early 2009 (runs on Leopard), to have the same things on it that my newer iMac has (runs on Snow Leopard). However, I'm running into a problem when I try to do that.
A few months ago I had no problem transferring ALL my data, accounts, files, applications, etc, from my new Mac to my old Macbook. I had erased the disk on my Macbook and then somehow managed to transfer all my data from the new Mac to the my old Macbook from a Time Machine backup.
Now, however, when I try to transfer it now through Migration Assistant or the startup disk, my Macbook tells me that I can't because my Macbook runs on an operating system older than my new Mac. It will not allow me to.
I don't remember how I did it last time. I remember getting the same error message, but finding a way to fix it... but I forgot completely! Last time, using the same Macs, and the same situation, I was able to transfer my data from the new Mac to the old one using Migration Assistant and Time Machine. Now it won't let me.
Is there any way to do this?
Please, advice would be appreciated. Thank you.

jessicaellenc wrote:
I know... but there has to be a way to do it without needing to upgrade. I was able to do it before, but don't remember how. So I know there's a way.... I wish I knew it though...
It's been awhile since I messed with this, but try opening Migration Assistant on the newer Mac.

Logicboard broken - how to transfer data to new iMac

Hey there!
About a month ago my MBPs logicboard died (Apple would replace it for 500€, but that's too much as I wanted a new iMac anyway), so I bought the new iMac and am NOW asking myself how to get access to my MBPs hdd. I guess I'll have to get it out of the MBP, but what next?
Thanks in advance!

Put it into a usb enclosure for laptop hard drive.
http://www.google.com/search?client=safari&rls=en&q=usb+enclosure+for+laptop+har d+drive&ie=UTF-8&oe=UTF-8

How to transfer data and pictures etc to my new Mac from my old Dell Pc?

How to transfer data, pictures,and etc. From my old Dell PC to my new Macbook Pro.
Thank you in advance.

A USB thumb drive is best, install the free ClamXav to run a scan on it first.
Windows malware doesn't affect a Mac, but you could have weird issues or transfer them to another PC user.
http://www.clamxav.com/

How to transfer data from an account to a new account in the same mac

How to transfer data from an account to a new account in the same mac (macbook)

Search these forums for merge accounts and also peruse these:

How to transfer data from one client to another client

Dear Experts,
Please explain how to transfer data (Materials) from one client to another client?
Thanks,
Ajay Kumar

Hi Ajay,
Check any of below methods
Refer thread http://scn.sap.com/thread/171981 where people use IDOCs for master data transfer.
OR
This is done by BASIS team, by client refresh or client copy. Check with your basis team for this and there is some predefined time when they plan this activity, and in most project they do it once in 3 months etc to get production environment in test system which helps to resolve issues of production by creating similar case in test system.
Check below threads for more information
http://sap.ittoolbox.com/groups/technical-functional/sap-basis/cleint-copy-vs-client-refresh-1377848
http://basissap.blogspot.in/2008/05/what-is-client-copy.html
OR
You can download data from one client and upload in another through BDC or LSMW.
Regards,
Sharat

[APD]: How to transfer data to SAP CRM?.

Dear Expert,
1. Do you know how to transfer data for APD to SAP CRM ??
2. The one that i know that we can transfer attribute of Business Partner (0BPARTNER) to CRM.
Can we transfer the data beyond attribute of 0BPARTNER? For example, data from ODS to ZTABLE on SAP CRM..
I really need your guidance & suggestion.
Many thanks all for your attention,
Best regards,
Niel.

Hi,
1. EEWB in this case is used to create tables in CRM Systems. So once i've made it (the tables), I can see that tables on BW Systems (particularly when i'm creating transformation).
Yes you are correct.

2. The procedure that i should make sequently :
a. [CRM Systems]: Create z-tables through tcode EEWB.
Btw, do i make tables throught this t-code either in BW System & CRM System ?
If yes, Should the project name in EEWB for both system has the similar name?
b. [BW Systems]: Create APD.
c. [BW Systems]: Create transformation in APD for mapping where you'll see the table created in CRM System.
a) correct
You will make tables in CRM system.After the extension creation you can check it in the t-code SE12 in CRM system.
b)by project name you mean the project you assign to the TR's????
then it depends upon your system.SInce these are two different systems therfore you should create two different projects in the two systems and assign the projects accordingly.
c) correct
An for others,
i made project in EEWB then i choose the business object is ADS (Analytical Data Storage) .. => Do i correct in choosing the business object there?
yes.
Yes this is I think a bug.I faced the same issue many times ... what you can do is try to deselect all the key figures and again select the keys.....this will help sometimes....after trying 2-3 times I think you will learn a way to come out of it:)
In future need my help ...you are welcome.
Thanks

How to transfer data from one system to another by datamart please give de

how to transfer data from one system to another by datamart please give details

Hi Deba,
Find the below SAP help doc which may help u...
http://help.sap.com/saphelp_nw70/helpdata/en/12/43074208ae2a38e10000000a1550b0/frameset.htm
Also find the below threads...
Loading data from one cube to another cube.
data copy from infocube to infocube in two different BW systems
Delta when loading from ODS to ODS
reg datamart
Data mart flag
Regards,
KK.

How to transfer data in table control in bdc

hi
how to transfer data in table control in bdc . I need the theory regarding this
bye

Hi,
just check in the forum , there is many threads available to ur questions.
Table control in BDC
http://www.sap-img.com/abap/bdc-example-using-table-control-in-bdc.htm
You can even refer to these related threads
bdc table control
Re: table control in bdc
table control in BDC
Reward if helpful.
Thanks
Naveen khan

How to transfer data in change log table of dso to z-table using abap code

Hi can you please explain me how to transfer data in change log table of dso to z-table using abap code ,with out using Function module concept

PROGRAM NAME:   ZBW_DELTA_TO_GSTAR                                 **
report ZBW_DELTA_TO_GSTAR no standard page heading
                                 line-size 120
                                 line-count 75
                                 message-id ZBW_MSG_CLS.
tables:   ZGIV_DLTA_EBV_BB,
          ZGIV_DLTA_EM2_BL,
          ZGIV_DLTA_EM2_BK.
Selection Screen Definitions
SELECTION-SCREEN: BEGIN OF BLOCK INNER WITH FRAME TITLE TEXT-001.
SELECTION-SCREEN: SKIP 1.
PARAMETERS:       EBVBB RADIOBUTTON GROUP ROLL,
                  EM2BL RADIOBUTTON GROUP ROLL,
                  EM2BK RADIOBUTTON GROUP ROLL.
SELECTION-SCREEN: END OF BLOCK INNER.
Data: WS_UPDATE_FLAG Type C,
       UCounter(9)      Type N,
       ICounter(9)      Type N.
DATA: T_ZGIV_DLTA_EBV_BB Type Standard Table of ZGIV_DLTA_EBV_BB,
       s_ZGIV_DLTA_EBV_BB LIKE line of T_ZGIV_DLTA_EBV_BB.
DATA: T_ZGIV_DLTA_EM2_BK Type Standard Table of ZGIV_DLTA_EM2_BK,
       s_ZGIV_DLTA_EM2_BK LIKE line of T_ZGIV_DLTA_EM2_BK.
DATA: T_ZGIV_DLTA_EM2_BL Type Standard Table of ZGIV_DLTA_EM2_BL,
       s_ZGIV_DLTA_EM2_BL LIKE line of T_ZGIV_DLTA_EM2_BL.
Standard Internal Tables - Describe usage.
data: begin of i_AEPSD_O0140 occurs 0.
        include structure /BIC/AEPSD_O0140.
data: end of i_AEPSD_O0140.
data: begin of i_AEPSD_O0240 occurs 0.
        include structure /BIC/AEPSD_O0240.
data: end of i_AEPSD_O0240.
data: begin of i_AEPSD_O0340 occurs 0.
        include structure /BIC/AEPSD_O0340.
data: end of i_AEPSD_O0340.
data: begin of i_GIV_DLTA_EBV_BB occurs 0.
        include structure ZGIV_DLTA_EBV_BB.
data: end of i_GIV_DLTA_EBV_BB.
data: begin of i_GIV_DLTA_EM2_BK occurs 0.
        include structure ZGIV_DLTA_EM2_BK.
data: end of i_GIV_DLTA_EM2_BK.
data: begin of i_GIV_DLTA_EM2_BL occurs 0.
        include structure ZGIV_DLTA_EM2_BL.
data: end of i_GIV_DLTA_EM2_BL.
Miscellaneous Program Variables and Constants.
TOP-OF-PAGE
top-of-page.
START-OF-SELECTION
start-of-selection.
Clear: i_GIV_DLTA_EBV_BB,
         i_GIV_DLTA_EM2_BK,
         i_GIV_DLTA_EM2_BL,
         UCounter, ICounter.
IF EBVBB = 'X'.
    PERFORM 100_EXTRACT_EBV_BB_DELTA_RECS.
ELSEIF EM2BK = 'X'.
    PERFORM 100_EXTRACT_EM2_BK_DELTA_RECS.
ELSE.
    PERFORM 100_EXTRACT_EM2_BL_DELTA_RECS.
ENDIF.
FORM 100_EXTRACT_EBV_BB_DELTA_RECS
FORM 100_EXTRACT_EBV_BB_DELTA_RECS.
Refresh:   i_AEPSD_O0140,
             i_GIV_DLTA_EBV_BB.
Clear:      UCounter, ICounter, s_ZGIV_DLTA_EBV_BB .
Select * From /BIC/AEPSD_O0140
    Into TABLE i_AEPSD_O0140.
IF SY-Subrc = 0.
    LOOP AT i_AEPSD_O0140.
      MOVE-CORRESPONDING i_AEPSD_O0140 TO s_ZGIV_DLTA_EBV_BB.
      MOVE SY-DATUM to s_ZGIV_DLTA_EBV_BB-create_dt.
      INSERT ZGIV_DLTA_EBV_BB FROM s_ZGIV_DLTA_EBV_BB.
      IF SY-Subrc = 0.
        ICounter = ICounter + 1.
      ELSE.
        UPDATE ZGIV_DLTA_EBV_BB FROM s_ZGIV_DLTA_EBV_BB.
        IF SY-Subrc = 0.
          UCounter = UCounter + 1.
        ELSE.
          Message E067 with SY-DATUM ' ' SY-UZEIT ' '.
        ENDIF.
      ENDIF.
    ENDLOOP.
ENDIF.
ENDFORM.                    "100_EXTRACT_EBV_BB_DELTA_RECS
FORM 100_EXTRACT_EM2_BK_DELTA_RECS
FORM 100_EXTRACT_EM2_BK_DELTA_RECS.
Refresh:   i_AEPSD_O0240,
           i_GIV_DLTA_EM2_BK.
Clear:      UCounter, ICounter, s_ZGIV_DLTA_EM2_BK .
Select * From /BIC/AEPSD_O0240
    Into TABLE i_AEPSD_O0240.
IF SY-Subrc = 0.
    LOOP AT i_AEPSD_O0240.
      MOVE-CORRESPONDING i_AEPSD_O0240 TO s_ZGIV_DLTA_EM2_BK.
      MOVE SY-DATUM to s_ZGIV_DLTA_EM2_BK-create_dt.
        INSERT ZGIV_DLTA_EM2_BK FROM s_ZGIV_DLTA_EM2_BK.
      IF SY-Subrc = 0.
        ICounter = ICounter + 1.
      ELSE.
        UPDATE ZGIV_DLTA_EM2_BK FROM s_ZGIV_DLTA_EM2_BK.
        IF SY-Subrc = 0.
          UCounter = UCounter + 1.
        ELSE.
          Message E067 with SY-DATUM ' ' SY-UZEIT ' '.
        ENDIF.
      ENDIF.
    ENDLOOP.
ENDIF.
ENDFORM.                    "100_EXTRACT_EM2_BK_DELTA_RECS
FORM 100_EXTRACT_EM2_BL_DELTA_RECS
FORM 100_EXTRACT_EM2_BL_DELTA_RECS.
Refresh:   i_AEPSD_O0340,
           i_GIV_DLTA_EM2_BL.
Clear:      UCounter, ICounter, s_ZGIV_DLTA_EM2_BL .
Select * From /BIC/AEPSD_O0340
    Into TABLE i_AEPSD_O0340.
IF SY-Subrc = 0.
    LOOP AT i_AEPSD_O0340.
      MOVE-CORRESPONDING i_AEPSD_O0340 TO s_ZGIV_DLTA_EM2_BL.
      MOVE SY-DATUM to s_ZGIV_DLTA_EM2_BL-create_dt.
        INSERT ZGIV_DLTA_EM2_BL FROM s_ZGIV_DLTA_EM2_BL.
      IF SY-Subrc = 0.
        ICounter = ICounter + 1.
      ELSE.
        UPDATE ZGIV_DLTA_EM2_BL FROM s_ZGIV_DLTA_EM2_BL.
        IF SY-Subrc = 0.
          UCounter = UCounter + 1.
        ELSE.
          Message E067 with SY-DATUM ' ' SY-UZEIT ' '.
        ENDIF.
      ENDIF.
    ENDLOOP.
ENDIF.
ENDFORM.                    "100_EXTRACT_EM2_BL_DELTA_RECS
END-OF-SELECTION
end-of-selection.
perform D1000_REPORT_DATA.
D1000_REPORT_DATA
form D1000_REPORT_DATA.
*Display the title of the program
write: /25 SY-TITLE.
skip.
Diaplay the details of the user and time
write: /1 'Executed by', 15 SY-UNAME, 30 'Date',
38 SY-DATUM, 53 'Time', 60 SY-UZEIT.
skip 2.
write: / 'Delta Records have been extracted ',
         /   'Updates : ', UCounter,
         /   'Inserts : ', ICounter.
skip.
skip 3.
write: /20 'End of the report'.
endform.                                           "D1000_REPORT_DATA
chgeck it out this also may hep you

How to transfer data from macbook pro to an external hard drive, im using (WD 1TB 3.0) ???. I cannot copy anything from my mac to it not a single file.

how to transfer data from macbook pro to an external hard drive, im using (WD 1TB 3.0) ???. I cannot copy anything from my mac to it not a single file.

ok - since you'll be sharing it with a PC - connect it to your windows pc - then format from there - instead of NTFS format - choose exFAT.
or, you can read the link below on how to do it in dos mode.
http://answers.microsoft.com/en-us/windows/forum/windows_7-files/how-can-i-forma t-external-drive-in-exfat-not-in/0f6bf19a-19d6-4470-ae05-53ddf26bb476?msgId=1860 eae3-3488-4eea-8326-f87b89d9851b
once you've formatted it - you can now use it in both your macbook and windows computer.

How to transfer data using the clipboard

Does anyone know how to transfer data (string) from the clipboard to labview?
I am trying to write C++ code using win32 API using the calls, OpenClipboard, Getclipboard and CloseClipboard functions. The problem is LV crashes when there is a call to the library function. Perhaps I am going about this the wrong way.
Any ideas are appreciated.

Perhaps this approach will give you the answer. I wrote a VI that uses the Win32 API directly. It calls OpenClipboard with the calling VI's window handle, then calls GetClipboard with the GW_TEXT constant to get a memory block handle. I lock the memory block with GlobalLock so other applications can't mess with it. I next call lstrcopynA , initializing a arg1 as a C String with 256 bytes and using the memory block handle as arg2, with the length of arg1 minus one as arg3. Your clipboard text is in the string output. Now call GlobalUnlock and CloseClipboard and you're done!
Attachments:
getclipboarddata.llb ‏168 KB

How to transfer data between planning functions in BPS

Hi All,
I have requirement, where user will enter the sales qty plan in manual planning function and need to read the zinfo object to distribute the sales qty accordingly to manufacturing plant and push into infocube.
To fulfill above requirement, i'm thinking to create one manual plan and user will enter the total sales qty and create one more exit planning function to distribute the sales qty for each plant.
For above approach, i need to get the data enter in mannual planning function to exit planning function.
Can anyone let me know how to transfer data from one planning function to other planning function under same planning level and package.
Thanks you,
santosh.

Hi Santosh,
You can achieve the Distribute functionality using the Standard Planning Function for Distribute (Refer SAP Help for details).
Moreover you would not have to do anything specifically to transfer data from one Planning Function to another. The application picks up the latest data records for processing whatever Function you are executing. If you want to execute a series of Planning Functions you could use a Planning sequence to achieve the same.
Hope it helps

How to transfer data from ECC to CRM via IDocs (Clfmas01),

Hi all,
how to transfer data from ECC to CRM via IDocs (Clfmas01), that to material master data from ECC to Production master data in CRM.
Need Information regarding, how to upload file to CRM from ECC, through, IDocs......Plz help me...
Edited by: khaja fareed on Jan 11, 2010 12:44 PM

First of all push ECC data in to GTS server through T.code:/N/SAPSLL/MENU_LEGALR3. First click on Master data tab there enter customer/vendor number then execute.
2-Go to document tab there enter Sales order no/PO number then execute it.
Then go to GTS server in compliance management module you can get all the information.
Regards
Sitanshu Panigrahi

How to transfer data from FPM_POWL_UIBB to FPM_FORM_UIBB

Hi Team,
How to transfer data from one UIBB (component is FPM_POWL_UIBB) to another UIBB ( Componenet is FPM_FORM_UIBB).
I know the procedure how to transfer data from FPM_LIST_UIBB to FPM_FORM_UIBB using wiring concept, but from FPM_POWL_UIBB am unable to do that.
Appreciate your quick response.
Thanks in advance.
Thanks,
Satya.

Hi Bruce,
Thanks for quick response.
I will explain my requirement in detail.
IN FPM I have used 5 UIBB's ,
1) FPM_POWL_UIBB with Custom component and its configuration
2) FPM_FORM_UIBB which is a standard componet UIBB's their configurations and its feeder classes are as below,
             EAMS_WDC_ORD_LONGTEXT_CFG       CL_EAMS_UI_FD_ORD_LTXT
             EAMS_WDC_ORD_HEADER_CFG          CL_EAMS_UI_FD_ORD_HEADER
             EAMS_WDC_ORD_RESPONSIB_CFG     CL_EAMS_UI_FD_ORD_HEADER
In the above FPM application if I choose a record in FPM_POWL_UIBB it has to be appear in the respective standard UIBB's in edit mode so user can change according to his/her comfort and will save.
I have tried Singleton method also but not able to transfer data as I got confused which interface I shoul use in singleton class , as I was working with FPM_POWL_UIBB I may not use IF_FPM_GUIBB_FORM.
Please suggest me on this.
Thanks,
Satya.

Outlook issue - How to transfer data to new identity?

Similar Messages

Maybe you are looking for