Outlook not switched over to active DAG member after failover

I have a 2 server DAG stretched across sites for DR.  Both of these servers are multi-role and have the HT, CAS, and MBOX roles.  Everything with the DAG seems to be working fine, as does what turned out to be an accidental failover to the remote
site.  A fail back also went fairly smoothly.
However, I've now discovered that some Outlook clients switched over to the DR server automatically and now they will not switch back.  I will come out right away and say that I do not have a CAS array.  I just learned about the CAS array while
researching the problem.  After refreshing my own mailbox profile, everything swapped back, but obviously I don't want to go around everywhere making that change.  I don't even know how many people are still connecting to the DR server.  In
fact, the only problem with the people that are connecting to the DR server is a little extra latency.
Obviously, I would like this to work better, and would like a good way to get the outlook users swapped back to where they should be right now.

There is a public folder and it is on the same server as the mailboxes.
2014-05-05T19:58:17.555Z,239,0,/O=Company/OU=domain/cn=Recipients/cn=user,,OUTLOOK.EXE,12.0.6672.5000,Cached,10.1.1.32,fe80::45df:6c5e:aec6:fad1%14,ncacn_ip_tcp,,Connect,0,00:00:00.0312510,"SID=S-1-5-21-2073836326-1490033320-1384523041-3159, Flags=None",
2014-05-05T19:58:17.571Z,239,1,/O=Company/OU=domain/cn=Recipients/cn=user,,OUTLOOK.EXE,12.0.6672.5000,Cached,,,ncacn_ip_tcp,,OwnerLogon,1144 (rop::WrongServer),00:00:00,"Logon: Owner, /O=Company/OU=domain/cn=Recipients/cn=user in database Mailbox Database 2063624589 last mounted on Server1.Company.com at 5/2/2014 4:36:10 AM, currently Mounted; Redirected: this server is not in a preferred site for the database, suggested new server: /o=Company/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Configuration/cn=Servers/cn=Server1",RopHandler: Logon:
2014-05-05T19:58:17.602Z,239,2,/O=Company/OU=domain/cn=Recipients/cn=user,,OUTLOOK.EXE,12.0.6672.5000,Cached,,,ncacn_ip_tcp,,Disconnect,0,00:00:00.0781275,,
2014-05-05T20:22:59.321Z,217,222,/O=Company/OU=domain/cn=Recipients/cn=user,,OUTLOOK.EXE,12.0.6672.5000,Cached,,,ncacn_ip_tcp,,DelegateLogoff,0,00:00:00,LogonId: 0,
2014-05-05T20:22:59.337Z,217,222,/O=Company/OU=domain/cn=Recipients/cn=user,,OUTLOOK.EXE,12.0.6672.5000,Cached,,,ncacn_ip_tcp,,DelegateLogoff,0,00:00:00.0156255,LogonId: 1,
2014-05-05T20:22:59.368Z,217,222,/O=Company/OU=domain/cn=Recipients/cn=user,,OUTLOOK.EXE,12.0.6672.5000,Cached,,,ncacn_ip_tcp,,DelegateLogoff,0,00:00:00.0468765,LogonId: 2,
2014-05-05T20:22:59.400Z,217,222,/O=Company/OU=domain/cn=Recipients/cn=user,,OUTLOOK.EXE,12.0.6672.5000,Cached,,,ncacn_ip_tcp,,Disconnect,0,07:43:06.1863315,,
2014-05-05T20:28:35.067Z,240,0,/O=Company/OU=domain/cn=Recipients/cn=user,,OUTLOOK.EXE,12.0.6672.5000,Cached,10.1.1.32,fe80::45df:6c5e:aec6:fad1%14,ncacn_ip_tcp,,Connect,0,00:00:00.0156255,"SID=S-1-5-21-2073836326-1490033320-1384523041-3159, Flags=None",
2014-05-05T20:28:35.098Z,240,1,/O=Company/OU=domain/cn=Recipients/cn=user,,OUTLOOK.EXE,12.0.6672.5000,Cached,,,ncacn_ip_tcp,,OwnerLogon,1144 (rop::WrongServer),00:00:00,"Logon: Owner, /O=Company/OU=domain/cn=Recipients/cn=user in database Mailbox Database 2063624589 last mounted on Server1.Company.com at 5/2/2014 4:36:10 AM, currently Mounted; Redirected: this server is not in a preferred site for the database, suggested new server: /o=Company/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Configuration/cn=Servers/cn=Server1",RopHandler: Logon:
2014-05-05T20:28:35.113Z,240,2,/O=Company/OU=domain/cn=Recipients/cn=user,,OUTLOOK.EXE,12.0.6672.5000,Cached,,,ncacn_ip_tcp,,Disconnect,0,00:00:00.0625020,,
2014-05-05T20:28:35.348Z,241,0,/O=Company/OU=domain/cn=Recipients/cn=user,,OUTLOOK.EXE,12.0.6672.5000,Cached,10.1.1.32,fe80::45df:6c5e:aec6:fad1%14,ncacn_ip_tcp,,Connect,0,00:00:00,"SID=S-1-5-21-2073836326-1490033320-1384523041-3159, Flags=None",
2014-05-05T20:28:35.379Z,241,1,/O=Company/OU=domain/cn=Recipients/cn=user,,OUTLOOK.EXE,12.0.6672.5000,Cached,,,ncacn_ip_tcp,,OwnerLogon,1144 (rop::WrongServer),00:00:00.0156255,"Logon: Owner, /O=Company/OU=domain/cn=Recipients/cn=user in database Mailbox Database 2063624589 last mounted on Server1.Company.com at 5/2/2014 4:36:10 AM, currently Mounted; Redirected: this server is not in a preferred site for the database, suggested new server: /o=Company/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Configuration/cn=Servers/cn=Server1",RopHandler: Logon:
2014-05-05T20:28:35.395Z,241,2,/O=Company/OU=domain/cn=Recipients/cn=user,,OUTLOOK.EXE,12.0.6672.5000,Cached,,,ncacn_ip_tcp,,Disconnect,0,00:00:00.0468765,,
2014-05-05T20:28:42.411Z,242,0,/O=Company/OU=domain/cn=Recipients/cn=user,,OUTLOOK.EXE,12.0.6672.5000,Cached,10.1.1.32,fe80::45df:6c5e:aec6:fad1%14,ncacn_ip_tcp,,Connect,0,00:00:00,"SID=S-1-5-21-2073836326-1490033320-1384523041-3159, Flags=None",
2014-05-05T20:28:42.442Z,242,1,/O=Company/OU=domain/cn=Recipients/cn=user,,OUTLOOK.EXE,12.0.6672.5000,Cached,,,ncacn_ip_tcp,,OwnerLogon,1144 (rop::WrongServer),00:00:00.0156255,"Logon: Owner, /O=Company/OU=domain/cn=Recipients/cn=user in database Mailbox Database 2063624589 last mounted on Server1.Company.com at 5/2/2014 4:36:10 AM, currently Mounted; Redirected: this server is not in a preferred site for the database, suggested new server: /o=Company/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Configuration/cn=Servers/cn=Server1",RopHandler: Logon:
2014-05-05T20:28:42.457Z,242,2,/O=Company/OU=domain/cn=Recipients/cn=user,,OUTLOOK.EXE,12.0.6672.5000,Cached,,,ncacn_ip_tcp,,Disconnect,0,00:00:00.0468765,,
2014-05-05T20:28:57.708Z,243,0,/O=Company/OU=domain/cn=Recipients/cn=user,,OUTLOOK.EXE,12.0.6672.5000,Cached,10.1.1.32,fe80::45df:6c5e:aec6:fad1%14,ncacn_ip_tcp,,Connect,0,00:00:00,"SID=S-1-5-21-2073836326-1490033320-1384523041-3159, Flags=None",
2014-05-05T20:28:58.005Z,244,0,/O=Company/OU=domain/cn=Recipients/cn=user,,SearchProtocolHost.exe,12.0.6672.5000,Cached,10.1.1.32,fe80::45df:6c5e:aec6:fad1%14,ncacn_ip_tcp,,Connect,0,00:00:00,"SID=S-1-5-21-2073836326-1490033320-1384523041-3159, Flags=None",
2014-05-05T20:28:58.020Z,244,1,/O=Company/OU=domain/cn=Recipients/cn=user,,SearchProtocolHost.exe,12.0.6672.5000,Cached,,,ncacn_ip_tcp,,OwnerLogon,1144 (rop::WrongServer),00:00:00,"Logon: Owner, /O=Company/OU=domain/cn=Recipients/cn=user in database Mailbox Database 2063624589 last mounted on Server1.Company.com at 5/2/2014 4:36:10 AM, currently Mounted; Redirected: this server is not in a preferred site for the database, suggested new server: /o=Company/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Configuration/cn=Servers/cn=Server1",RopHandler: Logon:
2014-05-05T20:28:58.052Z,244,2,/O=Company/OU=domain/cn=Recipients/cn=user,,SearchProtocolHost.exe,12.0.6672.5000,Cached,,,ncacn_ip_tcp,,Disconnect,0,00:00:00.0468765,,
2014-05-05T20:28:58.677Z,243,1,/O=Company/OU=domain/cn=Recipients/cn=user,,OUTLOOK.EXE,12.0.6672.5000,Cached,,,ncacn_ip_tcp,,DelegateLogon,0,00:00:00.9531555,"Logon: Delegate, /o=Company/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Recipients/cn=other user in database Mailbox Database 2063624589 last mounted on Server1.Company.com at 5/2/2014 4:36:10 AM, currently Mounted; LogonId: 0",
2014-05-05T20:29:05.286Z,243,7,/O=Company/OU=domain/cn=Recipients/cn=user,,OUTLOOK.EXE,12.0.6672.5000,Cached,,,ncacn_ip_tcp,,DelegateLogon,0,00:00:01.0469085,"Logon: Delegate, /O=Company/OU=domain/cn=Recipients/cn=cjoynt in database Mailbox Database 2063624589 last mounted on Server1.Company.com at 5/2/2014 4:36:10 AM, currently Mounted; LogonId: 1",
2014-05-05T20:29:06.552Z,243,27,/O=Company/OU=domain/cn=Recipients/cn=user,,OUTLOOK.EXE,12.0.6672.5000,Cached,,,ncacn_ip_tcp,,DelegateLogon,0,00:00:00.6718965,"Logon: Delegate, /O=Company/OU=domain/cn=Recipients/cn=cjoynt in database Mailbox Database 2063624589 last mounted on Server1.Company.com at 5/2/2014 4:36:10 AM, currently Mounted; LogonId: 2",
2014-05-05T20:33:09.013Z,243,36,/O=Company/OU=domain/cn=Recipients/cn=user,,OUTLOOK.EXE,12.0.6672.5000,Cached,,,ncacn_ip_tcp,,DelegateLogoff,0,00:00:00,LogonId: 0,
2014-05-05T20:33:09.028Z,243,36,/O=Company/OU=domain/cn=Recipients/cn=user,,OUTLOOK.EXE,12.0.6672.5000,Cached,,,ncacn_ip_tcp,,DelegateLogoff,0,00:00:00.0156255,LogonId: 1,
2014-05-05T20:33:09.060Z,243,36,/O=Company/OU=domain/cn=Recipients/cn=user,,OUTLOOK.EXE,12.0.6672.5000,Cached,,,ncacn_ip_tcp,,DelegateLogoff,0,00:00:00.0468765,LogonId: 2,
2014-05-05T20:33:09.091Z,243,36,/O=Company/OU=domain/cn=Recipients/cn=user,,OUTLOOK.EXE,12.0.6672.5000,Cached,,,ncacn_ip_tcp,,Disconnect,0,00:04:11.3830440,,
2014-05-05T20:33:15.435Z,245,0,/O=Company/OU=domain/cn=Recipients/cn=user,,OUTLOOK.EXE,12.0.6672.5000,Cached,10.1.1.32,fe80::45df:6c5e:aec6:fad1%14,ncacn_ip_tcp,,Connect,0,00:00:00,"SID=S-1-5-21-2073836326-1490033320-1384523041-3159, Flags=None",
2014-05-05T20:33:15.482Z,245,1,/O=Company/OU=domain/cn=Recipients/cn=user,,OUTLOOK.EXE,12.0.6672.5000,Cached,,,ncacn_ip_tcp,,OwnerLogon,1144 (rop::WrongServer),00:00:00,"Logon: Owner, /O=Company/OU=domain/cn=Recipients/cn=user in database Mailbox Database 2063624589 last mounted on Server1.Company.com at 5/2/2014 4:36:10 AM, currently Mounted; Redirected: this server is not in a preferred site for the database, suggested new server: /o=Company/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Configuration/cn=Servers/cn=Server1",RopHandler: Logon:
2014-05-05T20:33:15.497Z,245,2,/O=Company/OU=domain/cn=Recipients/cn=user,,OUTLOOK.EXE,12.0.6672.5000,Cached,,,ncacn_ip_tcp,,Disconnect,0,00:00:00.0625020,,
2014-05-05T20:33:15.763Z,246,0,/O=Company/OU=domain/cn=Recipients/cn=user,,OUTLOOK.EXE,12.0.6672.5000,Cached,10.1.1.32,fe80::45df:6c5e:aec6:fad1%14,ncacn_ip_tcp,,Connect,0,00:00:00,"SID=S-1-5-21-2073836326-1490033320-1384523041-3159, Flags=None",
2014-05-05T20:33:15.779Z,246,1,/O=Company/OU=domain/cn=Recipients/cn=user,,OUTLOOK.EXE,12.0.6672.5000,Cached,,,ncacn_ip_tcp,,OwnerLogon,1144 (rop::WrongServer),00:00:00,"Logon: Owner, /O=Company/OU=domain/cn=Recipients/cn=user in database Mailbox Database 2063624589 last mounted on Server1.Company.com at 5/2/2014 4:36:10 AM, currently Mounted; Redirected: this server is not in a preferred site for the database, suggested new server: /o=Company/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Configuration/cn=Servers/cn=Server1",RopHandler: Logon:
2014-05-05T20:33:15.810Z,246,2,/O=Company/OU=domain/cn=Recipients/cn=user,,OUTLOOK.EXE,12.0.6672.5000,Cached,,,ncacn_ip_tcp,,Disconnect,0,00:00:00.0468765,,
2014-05-05T20:33:15.810Z,247,0,/O=Company/OU=domain/cn=Recipients/cn=user,,OUTLOOK.EXE,12.0.6672.5000,Cached,10.1.1.32,fe80::45df:6c5e:aec6:fad1%14,ncacn_ip_tcp,,Connect,0,00:00:00,"SID=S-1-5-21-2073836326-1490033320-1384523041-3159, Flags=None",
2014-05-05T20:33:15.841Z,247,1,/O=Company/OU=domain/cn=Recipients/cn=user,,OUTLOOK.EXE,12.0.6672.5000,Cached,,,ncacn_ip_tcp,,OwnerLogon,1144 (rop::WrongServer),00:00:00,"Logon: Owner, /O=Company/OU=domain/cn=Recipients/cn=user in database Mailbox Database 2063624589 last mounted on Server1.Company.com at 5/2/2014 4:36:10 AM, currently Mounted; Redirected: this server is not in a preferred site for the database, suggested new server: /o=Company/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Configuration/cn=Servers/cn=Server1",RopHandler: Logon:
2014-05-05T20:33:15.857Z,247,2,/O=Company/OU=domain/cn=Recipients/cn=user,,OUTLOOK.EXE,12.0.6672.5000,Cached,,,ncacn_ip_tcp,,Disconnect,0,00:00:00.0468765,,
2014-05-05T20:34:26.375Z,248,0,/O=Company/OU=domain/cn=Recipients/cn=user,,OUTLOOK.EXE,12.0.6672.5000,Cached,10.1.1.32,fe80::45df:6c5e:aec6:fad1%14,ncacn_ip_tcp,,Connect,0,00:00:00.0156255,"SID=S-1-5-21-2073836326-1490033320-1384523041-3159, Flags=None",
2014-05-05T20:34:26.390Z,248,1,/O=Company/OU=domain/cn=Recipients/cn=user,,OUTLOOK.EXE,12.0.6672.5000,Cached,,,ncacn_ip_tcp,,OwnerLogon,1144 (rop::WrongServer),00:00:00,"Logon: Owner, /O=Company/OU=domain/cn=Recipients/cn=user in database Mailbox Database 2063624589 last mounted on Server1.Company.com at 5/2/2014 4:36:10 AM, currently Mounted; Redirected: this server is not in a preferred site for the database, suggested new server: /o=Company/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Configuration/cn=Servers/cn=Server1",RopHandler: Logon:
2014-05-05T20:34:26.422Z,248,2,/O=Company/OU=domain/cn=Recipients/cn=user,,OUTLOOK.EXE,12.0.6672.5000,Cached,,,ncacn_ip_tcp,,Disconnect,0,00:00:00.0625020,,
2014-05-05T20:34:26.937Z,249,0,/O=Company/OU=domain/cn=Recipients/cn=user,,OUTLOOK.EXE,12.0.6672.5000,Cached,10.1.1.32,fe80::45df:6c5e:aec6:fad1%14,ncacn_ip_tcp,,Connect,0,00:00:00,"SID=S-1-5-21-2073836326-1490033320-1384523041-3159, Flags=None",
2014-05-05T20:34:26.953Z,249,1,/O=Company/OU=domain/cn=Recipients/cn=user,,OUTLOOK.EXE,12.0.6672.5000,Cached,,,ncacn_ip_tcp,,OwnerLogon,1144 (rop::WrongServer),00:00:00,"Logon: Owner, /O=Company/OU=domain/cn=Recipients/cn=user in database Mailbox Database 2063624589 last mounted on Server1.Company.com at 5/2/2014 4:36:10 AM, currently Mounted; Redirected: this server is not in a preferred site for the database, suggested new server: /o=Company/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Configuration/cn=Servers/cn=Server1",RopHandler: Logon:
2014-05-05T20:34:26.984Z,249,2,/O=Company/OU=domain/cn=Recipients/cn=user,,OUTLOOK.EXE,12.0.6672.5000,Cached,,,ncacn_ip_tcp,,Disconnect,0,00:00:00.0468765,,
2014-05-05T20:34:27.234Z,250,0,/O=Company/OU=domain/cn=Recipients/cn=user,,OUTLOOK.EXE,12.0.6672.5000,Cached,10.1.1.32,fe80::45df:6c5e:aec6:fad1%14,ncacn_ip_tcp,,Connect,0,00:00:00,"SID=S-1-5-21-2073836326-1490033320-1384523041-3159, Flags=None",
2014-05-05T20:34:27.250Z,250,1,/O=Company/OU=domain/cn=Recipients/cn=user,,OUTLOOK.EXE,12.0.6672.5000,Cached,,,ncacn_ip_tcp,,OwnerLogon,1144 (rop::WrongServer),00:00:00,"Logon: Owner, /O=Company/OU=domain/cn=Recipients/cn=user in database Mailbox Database 2063624589 last mounted on Server1.Company.com at 5/2/2014 4:36:10 AM, currently Mounted; Redirected: this server is not in a preferred site for the database, suggested new server: /o=Company/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Configuration/cn=Servers/cn=Server1",RopHandler: Logon:
2014-05-05T20:34:27.281Z,250,2,/O=Company/OU=domain/cn=Recipients/cn=user,,OUTLOOK.EXE,12.0.6672.5000,Cached,,,ncacn_ip_tcp,,Disconnect,0,00:00:00.0468765,,
2014-05-05T20:34:28.234Z,251,0,/O=Company/OU=domain/cn=Recipients/cn=user,,OUTLOOK.EXE,12.0.6672.5000,Cached,10.1.1.32,fe80::45df:6c5e:aec6:fad1%14,ncacn_ip_tcp,,Connect,0,00:00:00.0156255,"SID=S-1-5-21-2073836326-1490033320-1384523041-3159, Flags=None",
2014-05-05T20:34:29.219Z,251,1,/O=Company/OU=domain/cn=Recipients/cn=user,,OUTLOOK.EXE,12.0.6672.5000,Cached,,,ncacn_ip_tcp,,DelegateLogon,0,00:00:00.9687810,"Logon: Delegate, /o=Company/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Recipients/cn=other user in database Mailbox Database 2063624589 last mounted on Server1.Company.com at 5/2/2014 4:36:10 AM, currently Mounted; LogonId: 0",
2014-05-05T20:34:30.250Z,251,2,/O=Company/OU=domain/cn=Recipients/cn=user,,OUTLOOK.EXE,12.0.6672.5000,Cached,,,ncacn_ip_tcp,,DelegateLogon,0,00:00:01.0312830,"Logon: Delegate, /O=Company/OU=domain/cn=Recipients/cn=cjoynt in database Mailbox Database 2063624589 last mounted on Server1.Company.com at 5/2/2014 4:36:10 AM, currently Mounted; LogonId: 1",
2014-05-05T20:36:00.971Z,252,0,/O=Company/OU=domain/cn=Recipients/cn=user,,SearchProtocolHost.exe,12.0.6672.5000,Cached,10.1.1.32,fe80::45df:6c5e:aec6:fad1%14,ncacn_ip_tcp,,Connect,0,00:00:00,"SID=S-1-5-21-2073836326-1490033320-1384523041-3159, Flags=None",
2014-05-05T20:36:00.987Z,252,1,/O=Company/OU=domain/cn=Recipients/cn=user,,SearchProtocolHost.exe,12.0.6672.5000,Cached,,,ncacn_ip_tcp,,OwnerLogon,1144 (rop::WrongServer),00:00:00,"Logon: Owner, /O=Company/OU=domain/cn=Recipients/cn=user in database Mailbox Database 2063624589 last mounted on Server1.Company.com at 5/2/2014 4:36:10 AM, currently Mounted; Redirected: this server is not in a preferred site for the database, suggested new server: /o=Company/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Configuration/cn=Servers/cn=Server1",RopHandler: Logon:
2014-05-05T20:36:01.003Z,252,2,/O=Company/OU=domain/cn=Recipients/cn=user,,SearchProtocolHost.exe,12.0.6672.5000,Cached,,,ncacn_ip_tcp,,Disconnect,0,00:00:00.0312510,,
2014-05-05T20:36:07.909Z,253,0,/O=Company/OU=domain/cn=Recipients/cn=user,,SearchProtocolHost.exe,12.0.6672.5000,Cached,10.1.1.32,fe80::45df:6c5e:aec6:fad1%14,ncacn_ip_tcp,,Connect,0,00:00:00.0156255,"SID=S-1-5-21-2073836326-1490033320-1384523041-3159, Flags=None",
2014-05-05T20:36:07.925Z,253,1,/O=Company/OU=domain/cn=Recipients/cn=user,,SearchProtocolHost.exe,12.0.6672.5000,Cached,,,ncacn_ip_tcp,,OwnerLogon,1144 (rop::WrongServer),00:00:00,"Logon: Owner, /O=Company/OU=domain/cn=Recipients/cn=user in database Mailbox Database 2063624589 last mounted on Server1.Company.com at 5/2/2014 4:36:10 AM, currently Mounted; Redirected: this server is not in a preferred site for the database, suggested new server: /o=Company/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Configuration/cn=Servers/cn=Server1",RopHandler: Logon:
2014-05-05T20:36:07.940Z,253,2,/O=Company/OU=domain/cn=Recipients/cn=user,,SearchProtocolHost.exe,12.0.6672.5000,Cached,,,ncacn_ip_tcp,,Disconnect,0,00:00:00.0312510,,

Similar Messages

  • Switch over from active to passive in the cluster

    If online EMS Sun Server goes off line , the client looses the connectivity with EMS till the IP address of the other online server is updated in client PC.
    When the servers switch over from active to passive in the cluster, we have to change the server IP settings at the client PC manually. Since both the active as well as the passive servers will be pinging, we are not in a position to identify the active/passive servers, so automatic server setting is not possible at the client.
    How to find out the solution for which server is active when the swich over is happend.

    Hi Kristoffer,
    remember to click on enable schedule when you schedule a package.
    To know if a scheduled package is ok you can see first if present in the tblschedule of your appset and also if present in the windows task schedulerif with status "ready".
    After you just have to check the view status if you found the package execution completed you're sure it's running. " version at the same time can cause issues also with different packages better to schedule with a sufficient delay to be sure that the first has ended, in your case 1 package is ok.
    I would delete the 2 packages from bpc, checking also the windows scheduler to be sure that no packages are running and rebuild one from scratch setting repeat every 4 hours and checking "enable schedule".
    Regards
         Roberto

  • Rpcclientaccess value blank on Active DAG member - normal?

    Hi,
    I decomissioned a Ex2010 server after moving all the mailboxes over to a new server in the same site a few weeks previously. Exchange was un-installed with no issues and no refernces were left in AD.
    Now, even though the mailboxes are accessible in Outlook on the existing profiles, I'm unable to set up a new profile as it defaults to the old server name, which no longer exists. Also, the users (thankfully only 3 on this DB) Blackberrys have stopped working.
    Done some troubleshooting and found that the BES is still seeing the old FQDN for these users. Upon checking the mailstore on the server, I found that its LegacyDN shows the old FQDN and that RcpClientAccessServer is blank. This mailstore is the active member
    of a DAG set up after the move so, it is normal for this to be blank?
    If not, would setting this to the correct FQDN help rectify the profile and BB resolver issue or would I need to change the LegacyDN as well?
    The Server is running Ex2010 SP1 with all roles (Its a small remote office so this is suffices).
    Any help would be appreciated.

    Hi,
    As far as I know, the RPCClientAccessServer value is established when the database is created.
    For more information about the basic rules used for determining the value, you can refer to the partition named configure your mailbox database in the following article:
    http://technet.microsoft.com/en-us/library/ee332317(v=exchg.141).aspx
    Thus, it’s not normal for the value to be blank.
    We can try Lrok’s suggestion to set the value.
    Please note that we should recreate the profile after we change the value to ensure client connectivity.
    Best regards,
    Angela Shi
    TechNet Community Support

  • SUP failed over manually, voice service failed after FAILOVER, started accessing old voice vlan which was removed from config

    Hey guys, 
    I am pretty sure, my subject is kinda confusing. Sorry about that. Here is what happened. 
    1. 4510r with Supervisor V 1000BaseX, switched over to standby Sup, then reseated Active SUP, once reseat complete, switched again to get the reseated SUP up and running as Active SUP. 
    2. a simple maintenance which was supposed to cause no outage and it did not cause any outage as well. 
    3. however, what i did not notice was, even though the voice vlan was configured to access 2353, they were accessing vlan 453. 
    4. the change was made 2 weeks prior to this maintenance where voice vlans were previously accessing 453 and they were all changed to access 2353. configs were saved. 
    5. however, after the maintenance, the running config showed that they were acessing 2353 but when checking the mac address on the interface, it was seen accessing 453. 
    6. the fix was to remove the config and re add it , that fixed it. 
    Has anyone else experienced the issue ? What really happened there ?  
    software version: Version 15.0(2)SG5
    #sh module 
    Chassis Type : WS-C4510R
    Power consumed by backplane : 40 Watts
    Mod Ports          Card Type                                            Model             
    ---+-----+--------------------------------------+------------------+-----------
     1     2  Supervisor V 1000BaseX (GBIC)                 WS-X4516            
     2     2  Supervisor V 1000BaseX (GBIC)                  WS-X4516           
     3    48  10/100/1000BaseT (RJ45)V, Cisco/IEEE   WS-X4548-GB-RJ45V  
     5    48  10/100/1000BaseT (RJ45)V, Cisco/IEEE   WS-X4548-GB-RJ45V   
     6    48  10/100/1000BaseT (RJ45)V, Cisco/IEEE   WS-X4548-GB-RJ45V   
     7    48  10/100/1000BaseT (RJ45)V, Cisco/IEEE   WS-X4548-GB-RJ45V  
     8    48  10/100/1000BaseT (RJ45)V, Cisco/IEEE   WS-X4548-GB-RJ45V   
     9    48  10/100/1000BaseT (RJ45)V, Cisco/IEEE   WS-X4548-GB-RJ45V   

    configs were saved many times prior to the maintenance. i did a " write mem ". 

  • How to Troubleshoot why data is not moving over into the Data Warehouse after Sql Server Agent Job Run

    Hello,
    Here is my problem:
    Data was imported into the staging area. After resolving some errors and running the job, I got the data to move over to the next area. From there, data should be moving over into the DW.  I have been troubleshooting for hours and cannot reslove this
    issue. I have restarted the sql service services, I have ran a couple packages manually, and the job is running successfully. 
    What are some reasons why data is not getting into the data warehouse? Where should I be looking? 
    Your help is greatly appreciated!!

    Anything is possible.
    So, just to reiterate, running the job manually works, running the scheduled job does not result in errors neither data arriving to the DW, right? And it used to, correct?
    If so, the 1st step would be to examine the configuration(s). But not before you inspect the package. Do you have an ability to export it to a file system and open in BIDS?
    Arthur My Blog

  • Switching over once button is pressed

    Thanks for the help so far everyone! I have this VI almost working. It does 'almost' what i want. It switches within program but not quite how i want. It does it on a time basis and i dont want this.
    My current system works by pressing a button on my testing kit and recording the result. Within the singlemode loop i then need it to switch to the return loss loop. Press a button and record return loss. I only want it to switch once the test has been completed. Not on a timely basis.as it is at the moment (loop1 loop0 loop1 loop0). I also am trying to send a string out (write buffer) to the serial port so it automatically switches over  from IL to RL and then back again. The issue i have is i send that to the write buffer(REL1550 & RET11550) on the serial line but it keeps showing up within my read buffer and is not switching over my kit.
    Please help!
    I hope this makes some sense!
    Attachments:
    FFv0.09 forum.vi ‏43 KB

    Hi Printerman,
    Thank you for contacting National Instruments. Having looked at your code, I don't think that it is changing from one loop to the next. Your conditional teminal has either 0 or 1 but is wired to the While loop iteration terminal. This will go up as the program is run so I suspect the loops will go from Loop 0, Loop 1, Loop 1.... this is certainly what I have witnessed with highlight execution enabled. 
    If you don't want these loops to be time dependant, I would suggest that you use an Event structure. I have linked an article that explains the basic operation and I would suggest looking at the following example.
    Draw Graph with Events.vi
    Please let me know how you get on.
    Many thanks,
    Andrew McLennan
    Applications Engineer
    National Instruments

  • I signed in to sync but my bookmarks did switch over

    i wiped my laptop back to factory settings then i tried to sync but my bookmarks from firefox did not switch over.so i hope someone can resolve this matter for me.

    HI Maryam Hasan,
    Firefox Sync is not meant to be a back up, I apologize if the bookmarks are not syncing, do you have a back up of them from before the wipe?
    Also check:
    #Look in Unsorted Bookmarks. Is anything else from your old profile syncing? (e.g., history)
    #Were you ever syncing your bookmarks. See if the checkbox is checked in Preferences.
    I am sorry for the inconvenience.

  • DAG Member Reboot & Outlook Connectivity

    Hello. I Have two Exchange 2013 CU3 Standard servers in a DAG. 
    The servers are running Server 2012 Standard.
    We’ve had a few users report that they sometimes encounter an error when trying to attach an Outlook item (e-mail message) to an existing item in a public folder calendar.
     The users can attach the item, but when they click on Save, a message stating that “Changes made to the item were lost due to a reconnect with the server.” appears.
      The clients are all running Outlook 2010 SP2.
    I have determined that in at least one case, and probably a few more, this happened during or shortly after, I was rebooting our passive DAG member as part of the process of installing Microsoft updates on it. 
    I use round robin DNS to achieve the load balancing needed to provide high availability. 
    A check on the connectivity status of an Outlook client shows the name of the DNS record associated with this as the proxy server. 
     The name is essentially “serverLB”.  Since I have DNS records for serverLB that point to the IP address of each DAG members, is it possible that some clients are connecting to the passive node, and, therefore, affected
    by it being rebooted?    I’d like to understand how rebooting the passive server causes the problem encountered by the Outlook users. 
    If you have any insights into that, please share them with me. 
    Thanks.

    Hi. Thank you for the response.
    I have two nodes in the DAG.
     The passive server is completely passive - it has no mounted databases.
    Please clarify your comment about checking "server health” on the active node when the passive node is rebooting. 
    What exactly do I look for, and what is the best method of doing this? 
    As far as checking replication health when the passive node is rebooting, I would expect Test-ReplicationHealth to indicate that replication is failing because one of the servers is rebooting and, therefore, unavailable. 
    With regards to database copy status, I would also expect that get-mailboxdatabasecopystatus * would report failures since the passive node is unavailable due to the reboot.
    Accessing the user mailbox through OWA rather than Outlook is a good idea. I'll try that during our next scheduled reboot. That, however, may not happen for about a week.
    I don’t have the money for a hardware load balancing solution, and network load balancing is incompatible with a DAG. 
    Consequently, round robin DNS is the only option for me.
    Please clarify your comment about adding HOST file entries. 
    Do you mean that if I add two entries for serverLB and the IP address of each server to the HOST file on each client, I could avoid the issue I have asked about?

  • I booted up this morning to find my voice over feature active. A black bar was at the lower left corner of my screen. When I began to click on the users in my login window it would not respond. All that I saw was the black bar saying authentication busy.

    I booted up this morning to find my voice over feature active. A black bar was at the lower left corner of my screen. When I began to click on the users in my login window it would not respond. All that I saw was the black bar saying authentication busy. I was not able to restart, I was not able to switch users, I was not able to shut down. I decided to manually shut down my Mac.  when it booted back up I was looking at the disk utility screen. When I clicked on repair or race it indicated that my hard drive had already been arranged. I was looking at completely formatted drive and I was having to either restore from Time Machine or reinstall lion. I had a back up but why did this happen?

    A possible workaround could be to have the horizontal scroll bar visible all the time.
    <pre><nowiki>body { overflow-x: scroll !important; }</nowiki></pre>
    * Stylish: https://addons.mozilla.org/firefox/addon/stylish/

  • After having entered my login details at gmail , its showing me 'redirecting' on the tab button. But its not loading. I have to switch over to the basic html ve

    I have to switch over to the basic html view. Also , I am having problems while reading mails from my yahoo account. Some other sites (www.jobztoday.in) are also not loading properly.

    Hello,
    Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
    Note: ''This will temporarily log you out of all sites you're logged in to.''
    To clear cache and cookies do the following:
    #Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
    #Under "Time range to clear", select "Everything".
    #Now, click the arrow next to Details to toggle the Details list active.
    #From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
    #Now click the ''Clear now'' button.
    Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
    Did this fix your problems? Please report back to us!
    Thank you.

  • External and internal mikes are not automatically switching over either recording or on voice calls

    My laptop model name is HP Pavilion dv4-1100ea which is shipped with Vista Home premium 32 bits and has got service pack 1.
    Restored the laptop to factory setting since then I am having the following problems; I had the same problem when my laptop was brand new and whenever I reset the laptop to factory setting I get the following problems:
    1. External and internal mikes are not automatically switching over either in middle of the recording using sound recorder or while the call in progress on voice calls (skype):
       Using the sound recorder if I start recording the sound with external  mike  and in-between  recording if I  switchover from external mike to inbuilt mike and later on when I play back I can only hear the sound  up till where I used the external mike during recording, after the switchover to inbuilt mike I cant hear any sound.
       But if I start the recording with inbuilt mike and in between recording  if I plug in  the external mike and later on when I play back I can only hear the sound up till where I used the inbuilt mike during recording , after the switchover to external mike I cant hear any sound.
       So in brief both my external and internal mikes are working fine, only problem is that if I start recording (using sound recorder) or voice call with one specific mike, I have to continue with it till the end. I can’t switchover to another mike in between the conversation (voice call) or recording, if I do so, I have to select the mike manually in chat software but while recording I cant even select manually because in laptop, it takes the mike whichever is in current use as default mike in recording tab(sound window). The green tick automatically (in recording device tab) switches over according to the use of mike. Though the green tick in the recording tab is switching over automatically according to use of mikes, its not picking up the sound after switch over during recording.
    2. And also when I click on recording device tab in sound window and plug in external mike, though the green tick automatically switchovers from internal to external mike, while I speak both internal and external mikes volume meter respond to the sound inputs by rising and falling but if I take out external mike, green tick goes to internal mike and when I speak only internal mike volume meter respond to sound rising up and down not the external mike.
    To resolve the issue I have tried following steps with no luck:
    1.I have checked the mikes(internal and external) properties, the both mike shows to be enabled in general tab, in level tab the volume is set to 100 and in advanced tab , all options are selected.
    2. In device manager I have got only one audio driver named as “IDT High definition Audio CODEC”. I have uninstalled the audio driver and reinstalled it using scan for hardware option
    3. Uninstalled the audio driver in device manager and reinstalled the audio driver using recovery manager > advanced option> hardware driver re-installation.
    3. I have updated the BIOS(Insyde F.65, 12/02/2010).
    4. I tried to update the audio driver using below link but things went more worse so I did system restore (not factory setting though).
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-67051-1&lc=en&dlc=en&cc=us&...

    Sounds like you need to upgrade to the iPhone 5s
    The 5s has Touch ID
    You can unlock your phone with your finger instead of typing in a key code
    No swiping to unlock either, just touch the home button
    You can enrol multiple fingers as well
    Here is a video of it in action
    http://www.apple.com/iphone-5s/videos/#video-touch
    Or wait and see what iPhone 6 has to offer
    That being said, as desiel vdub posted if the phone is up to your face, the proximity sensor should turn the screen off
    And when you lower the phone turn it back on again
    Not sure about the phone locking when your on a call doesn't sound right

  • My phone is not switching from 4G over to WiFi. The phone has the network memorized its just not check marking the network and to switch over to WiFi. How can I fix this?

    I have the iPhone 4S and the wifi was working on it earlier yesterday. I noticed that the wifi didn't kick on last night. It has the network memorized so it could connect automatically. The network name pops up and there's a signal but the spinning circle thing is there and it won't put a check mark by the network name. The wifi will pop up every now and then but only stay for a minute or less. Everyone else's phone and computer is connecting just fine but mine isn't. It won't switch over to WiFi from 4G. I've tried turning off the wifi on my phone. I've tried to forget the network and put in the password numerous of times and I tried to fix it by turning my phone on and off and that still didn't work. I'm hoping that this is a temporary thing but I don't know. What's a good way to fix this because seriously I would like to not use up all of my data for this kind of bull crap. So what's a good way to fix this?

    I got the ATV hooked up to the WiFi after manually inputting the DHCP settings.
    The ATV will not see iTunes from a PC on the same iTune network.  I guess you need an Apple computer for iTunes to connect to the ATV.
    The biggest problem is that the iTunes store on the ATV is nonexistent I imagine because of competition/ monopolies in the UAE.  If I was in Lao, Burma, Thailand, Mozambique no problem.  40 Countries are listed and non of them are from the Middle East.  When I logon to the iTunes store on my PC it too does not allow for me to buy any movies or TV shows.  I am not sure why. 
    As for the iPad OS6, iTunes has an icon and when you click it you get iTune U or Podcast, no video content.  The App store works fine and they are always happy to take your money but no video content. 
    To top it all off YouTube is no longer licensed under OS6.0 and although I can get it on Google Chrome it is by no means as quick (for reasons unknown).
    As I said before if I choose United States as my country the ATV hooks up and lets me browse TV and movies and watch trailers but not able to purchase (obviously).
    So my conclusion is that ATV will not hook up to the iTune store in the UAE?  If this is incorrect please clue me in.

  • I was forced to switch from my original computer to a new one and majority of my iTunes were switched over but my audiobooks did not. Is there any way that I can retrieve them again?

    I was forced to switch from my original computer to a new one and majority of my iTunes were switched over but my audiobooks did not. Is there any way that I can retrieve them again. If I go to attempt to rebuy it, then it says thhat I technically already bought it but it won't download.

    Audiobooks are not available for redownloading, so you need to transfer them from your old computer, or get them from your backup. How did you copy your iTunes contact from your old computer to our new one?
    Regards.

  • I have a licensed copy of Adobe Acrobat X Pro for Windows.  I recently switched over to MAC OS and would like to move my Adobe X Pro over but the CD will not work for Mac OS?  Can anyone assist me with this conversion?  Best,  James.

    I have a licensed copy of Adobe Acrobat X Pro for Windows.  I recently switched over to MAC OS and would like to move my Adobe X Pro over but the CD will not work for Mac OS?  Can anyone assist me with this conversion?
    Best,
    James.

    you cannot use your pc license to install on a mac.  you would need a separate license (and serial number) for that.
    adobe allows platform swaps, but only with the latest (xi) version, Order product | Platform, language swap
    your option to use acrobat on a mac are to upgrade to acrobat pro xi and change platforms, use a windows emulator (parallels/boot camp etc) on your mac or swap with a third party.

  • I'm going to be a senior this year and my school is switching over to the iPad for classroom activities. Which iPad is the best for taking notes, researching, studying, reading, etc?

    I'm going to be a senior this year and my school is switching over to the iPad for classroom activities. Which iPad is the best for taking notes, researching, studying, reading, etc?

    I Recommend the iPad Mini Retina, it's not to big, and not to small. It has the speed of the iPad Air due to it having the same 64 Bit chips. ( And it's a lot cheaper!!) I have one myself and it's perfect for my school work!
    iPad Mini
    http://www.apple.com/ipad-mini/
    or don't 'to take my word for it, compare the iPads!
    http://www.apple.com/ipad/compare/

Maybe you are looking for

  • Headphone Jack Glowing Red, Internal Speakers Not Working...

    Hey, I have a 2.0GHz White MacBook (almost a week old), and I just recently came across this problem (this morning, actually). I usually have my MacBook connected to some external speakers through the headphone jack, the internal speakers are pretty

  • How to get ipad information

    Dear Sir , i will be grateful if you could assist me to fix my ipad. it only display itunes logo. Ipad 32GB serial number v5052cmwetu

  • Repository error:Error -: AIP-50143:Transaction Instance Not fo

    Hi Ramesh, The Scenario is as follows: 1. we are running a stub on WLI server(back end) which enques a message in to the JMS queue. 2.This JMS queue is used in the B2B internal delivery channel. 3.The message is coming to the B2B , however we are get

  • Keep Applet on top

    Hello, im new to java and I have recently run into an issue that needs resolved, i have a DatePicker applet that is used on our company page and I was told to implement it to various places on our site, on a few of our pages there is a text box direc

  • 4:3 playback on 16:9 monitors is distorted

    I have a DVD with 4:3 and 16:9 footage on separate tracks. When I encoded with BitVice and authored with DVDSP, I thought I set all aspect ratio settings correctly. The DVD does play back correctly on 4:3 monitors: 4:3 footage is full frame and 16:9