Outlook problem from an absolute beginner

A friend has sent us a mail which has photos. It is about 8mb. It successfully appeared on our Yahoo account (why does everything on our Outlook duplicate here?) also to our Gmail account but has NEVER arrived via Outlook - which we habitually use. I do know that Yahoo and Gmail are webmail and guess that this may have something to do with it - but we don't normally use these and want Outlook to work properly! We are now getting regular messages when we send/receive which say 'Receiving repeated error 0x800CCC0F: the connection to the server was interrupted. If this persists please contact your ISP'.
1. How do I contact our ISP?
2. Our Broadband is remarkably slow. Is it just not capable of downloading big mails in some kind of predetermned time?
3. Is there some way of altering Outlook so that larger mails can get to me?
I guess I may look pretty dim by asking these questions but I really do not have a starting point!
Solved!
Go to Solution.

Yahoo and Gmail accounts can be accessed as webmail using a browser where you pick up your emails direct from their servers. You can then get them from there using an email client like Outlook which downloads the emails from the yahoo or Gmail servers to your PC. There seems to be a problem at the moment with yahoo servers that causes large email downloads to timeout before they are completely downloaded by email clients like Outlook particularly if you have a slowish broadband connection.
In answer to your questions:
1. Contacting your ISP is probably a waste of time.
2. Probably YES.
3. You could try increasing the Timeout period in the server section of your Account details of your email account in Outlook but this seems not to be successful for some people.
The best advice at the moment is to download the photo attachments using webmail and then move the corresponding email to a new folder on webmail so that Outlook does not attempt to download it. Or if you do not want to keep the email delete it.

Similar Messages

General questions from an absolute beginner

Dear all,
my employer would like to have me set up an online help for our software product. Since I am in the process of converting the current documentation to FrameMaker I have lightly issued the idea to use RoboHelp since we have the technical communications suite 2... I am saying "lightly" because I am freaking out a bit ever since I have tried getting into it, needless to say I have not been very successful and I was not able to find any "classroom in a book"-like help. I didnt find the Adobe help section for RoboHelp very... helpful, I just felt overwhelmed with all the information i didn't feel I needed at the point I was at. Is there a step by step documentation of some sorts for the absolute beginner who does not even have any xml or html skills worth mentioning (I am not sure to what extend those might be needed)?
Also from an advanced user's point of view, how developed will my html/xml skills have to be in order to really understand and get the best of this program? Depending on this I might or might not be able to book a class but it won't be of any use if i need skills I dont have (yet) in order to even understand the program. In the worst case I might have to do some research on alternatives, although I feel stupid, since the tool is available and im not sure if better alternatives would be easier to use as well...
I am happy for any advice, thank you!

Hi Jeff,
right now the problem is more "Getting Started" and im sure once I am at the point where I need to import the FM content this will be a helpful suggestion! But for now I was more wondering on whether there was a step-by-step thingy to help me get into it to begin with and whether i need a lot of xml/html to use RoboHelp...

Absolute beginner's question: scaling video in embedded player

Hi folks,
I'm an absolute beginner in flash video embedding - my company has purchased FMS 3.5 and I have to -simply- stream videos from a server via following HTML-Code:
<object width="800" height="600" id="videoPlayer" name="videoPlayer" type="application/x-shockwave-flash" classid="clsid:d27cdb6e-ae6d-11cf-96b8-444553540000">
<param name="movie" value="../swfs/videoPlayer.swf" />
<param name="quality" value="high" />
<param name="bgcolor" value="#000000" />
<param name="allowfullscreen" value="true" />
<param name="flashvars" value="&videoWidth='800'&videoHeight='600'&dsControl=manual&dsSensitivity=100&serverURL=r tmp://<here the url>&DS_Status=true&streamType=vod&autoStart=true" />
<embed src="../swfs/videoPlayer.swf" width="800" height="600" id="videoPlayer" quality="high" bgcolor="#000000" name="videoPlayer" allowfullscreen="true" pluginspage="http://www.adobe.com/go/getflashplayer" flashvars="&videoWidth='800'&videoHeight='600'&dsControl=manual&dsSensitivity=100&serverU RL=rtmp://<here the url>&DS_Status=true&streamType=vod&autoStart=true" type="application/x-shockwave-flash">
</embed>
</object>
My problem is simply the scaling of the videos. The files are .flv-files and do stream very well from the source directory to my browser. But when I change the object-width or object-height the video is just cut instead of scaled.
If I change the videoHeight or videoWidth (in Flashvars) it has no effect. What am I doing wrong?
ps The player naturally scales the clips slightly larger than they really are. So I already guess that there's a setup-file with settings, but I have no idea where to look it up to configure the player.
I would appreciate your help!
Thanks in advance!
kuk

IN CASE someone has this problem too, it seems the standard Adobe stream player integrated in the FMS-Installation (...) cannot resize the video. So the solution seems to be using another player. I'll use the free FlowPlayer which I also used for replaying .flv-Files, and which has a rtmp-plugin for streaming. Good luck folks...
kuk

IPhone 4S Calendar will not synch to OutLook 2010 from 1 of 2 phones

Problem: iPhone 4S Calendar will not synch to OutLook 2010 from 1 of 2 phones. Contacts synch fine. Was no problem in the past until...
Sorry for the length. Trying to give all info I can.
Summary: Had to get motherboard fixed under factory warranty which included new hard drive, and reinstall everything on an HP DV7 laptop. So this is a clean installation of everything on the laptop (Win7). Configuring iTunes and Outlook 2010 for two iPhone 4S users (myself and wife) was my last step. Re-established each user account to iTunes. Calendar synch problem popped up on one of two iPhones that did not exist before.
Prior history: all synchs worked great prior to the clean install and I never had a problem.
Config: Windows 7, two iPhone 4S, Week Calendar apps on both. All software up-to-date on iPhones and Win7 (fanatic about that). Had OL2010 PST datafile backups and simply used them for the OL re-installs. OL2010 makes that easy. Each user has their own Win7 login to keep our stuff separate. Of course, OL has Calendar as part of its install.
Week Calendar apps on both are configured with same calendars (Calendar, Home, My Birthdays, Work). Verified each iPhone Calendars app, Calendar button: From My PC listing has all these checked: All From My PC, Calendar, Home, My Birthdays, Work; Other: Birthdays.
Difference: In using iTunes to synch, iTunes said the iPhone account was different from the OL account and asked to merge or replace. Apparently this is normal for iTunes on a new install (since basically it is) synching to prior synched stuff.
iTunes settings for both: Connect iPhone for each user and checked INFO settings for Contacts and Calendars.I used “selected calendars” and verified. Each user has all four calendars checked.
NOTE: Prior to each users first synch below, neither user had anything in OL2010 Calendar. Can't blame on recurring events problems in OL. ALL the events are on the iPhones and are being synched TO the PC to populate OL2010 Calendars.
Additional Note: Contacts was already loaded into OL from my backups so synching has no problem.
User 1 iPhone: Success 1st try.
In iTunes, selected “merge info” instead of replace.
Results: User 1 synched fine from iTunes to OL2010 including the 4 Calendars (Calendar, Home, My Birthdays, Work). 4 calendars showed up. No problems at all. Wonderful! expected behavoir.
User 2 iPhone: Still failing to synch.
In iTunes, selected “replace” instead of merge info. Apple’s dialog is incredibly confusing and non-explicit on what copies to what and what it does.
Results: User 2 synched fine from iTunes to OL2010 for Contacts. DID NOT synch the 4 Calendars (Calendar, Home, My Birthdays, Work). Only calendar that shows up in OL is Calendar and it doesn’t contain any data. iTunes has no errors and the synch status bar indicates everything went fine.
Tried: I deleted the PST files and copied the backup files back to OL to start over. ITUNES no longer gives me the merge info versus replace option. I’ve synched multiple times but the calendar data will not synch.
Not Tried: Creating the same remaining named calendars (Home, My Birthdays, Work) in OL and trying again.
ALL suggestions is greatly appreciated.

Ok, new info. This gets better and better.
In OL2010, the Calendar in the navigation pane had no arrow indicating it had subcalendars within it. I right clicked on Calendar and chose New Calendar. It gave me a list of the existing calendars that were missing !!
When I cancelled, there was an expand arrow next to Calendar in the Navigation pane !!!!!
Expanding it showed the unchecked missing calendars. I checked them and synched again.
WRONG THING TO DO! ALL my wife's calendar entries in her iPhone since the laptop went down 3 weeks ago DISAPPEARED. No warnings, nothing at any step of this process. The OL files overwrote the iPhone data.
I can't find any way to get them back as this **** iStuff relies on iTunes for everything.
Is there any way to get her files back from before this synch?
Is there no way to save data files off the iPhone w/o iTunes?
Why doesn't iTunes let you control the direction of data transfer?
I now have one very ****** off wife.

Outlook 2003 from Office 2003 Basic Edition - Connector Install Error

I am unable to install the Outlook Connector on machines running Outlook 2003 from Office 2003 Basic Edition. Standard Edition clients seem to work fine. I am getting something similar to the following error:
Severe
Error retrieving Outlook version.Setup cannot continue
I have tried the 9.0.4.2.0 version, is there one newer than this?
Is there something I can do to Outlook to make it pass for an acceptable version? This seems to me to be an error in the installer, so perhaps I can fool it?
Thanks in advance,
Bob

Nevermind. An Office Repair did the trick. The problem machines also had some of the Office 2000 components installed.

Best absolute beginner book

Hi eveyrone,
I need opinions here... I would like to know what the best ABSOLUTE beginner book would be, for Java - in your opinion. I've been messing with Java for the past couple days.. and haven't got very far.
I have used Visual Basic in the past. I do not know C/C++.
Thanks for the opinions!
-Jonzo

There's no absolute best. A lot of it depends on the individual's style, etc.
All of the following should be decent. Check them out and find out which ones work best for you.
Sun's basic Java tutorial
Sun's New To Java Center. Includes an overview of what Java is, instructions for setting up Java, an intro to programming (that includes links to the above tutorial or to parts of it), quizzes, a list of resources, and info on certification and courses.
http://javaalmanac.com. A couple dozen code examples that supplement The Java Developers Almanac.
jGuru. A general Java resource site. Includes FAQs, forums, courses, more.
JavaRanch. To quote the tagline on their homepage: "a friendly place for Java greenhorns." FAQs, forums (moderated, I believe), sample code, all kinds of goodies for newbies. From what I've heard, they live up to the "friendly" claim.
Bruce Eckel's Thinking in Java (Available online.)
Joshua Bloch's Effective Java
Bert Bates and Kathy Sierra's Head First Java.

How can i read outlook emails (from my Dell) on my mac?

Hi! I have saved all my outlook emails from my PC to a hard drive and want to view them on my macbook. Do i have to buy the full office/outlook software package or is there another way to read them?
I have word and xls on my mac from buying the student office package... but want to avoid buying it all again if i can just read the emails on another reader or just buy the outlook email software...
Thanks
Graham

can annyone assist me whit this problem?
Not without providing more information about the type of email account (POP3, IMAP, or Exchange) and what settings you use in the account

An absolute beginner

Hello,
I'm an absolute beginner. I work in the Windows 2000 Professional environment. I downloaded J2SDK1.4.0_01 but I cannot run HelloWorldApp. After typing
javac HelloWorldApp.java
in the command line I only get another prompt (after delay of some secs).
I downloaded and installed the program in the default folder j2sdk1.4.0_01. I also added the path
;C:\>j2sdk1.4.0_01\bin; in the Control Panel\System\Advanced\Environment Variables\System Variables\Path.
After typing
javac -verbose HelloWorldApp.java
I get the following message answer:
[parsing started HelloWorldApp.java]
[parsing completed 161ms]
[loading C:\J2SDK~1.0._0\jre\lib\rt.jar(java/lang/Object.class]
[loading C:\J2SDK~1.0._0\jre\lib\rt.jar(java/lang/String.class]
[checking HelloWorldApp]
[loading C:\J2SDK~1.0._0\jre\lib\rt.jar(java/lang/System.class]
[loading C:\J2SDK~1.0._0\jre\lib\rt.jar(java/io/PrintStream.class]
[loading C:\J2SDK~1.0._0\jre\lib\rt.jar(java/io/FilterOutputStream.class]
[loading C:\J2SDK~1.0._0\jre\lib\rt.jar(java/io/OutputStream.class]
[wrote HelloWorldApp.class]
[total 4056ms]
C:\>
I also didn't find any HelloWorldApp.class file.
Any suggestion would be appreciated. I have to run this file in two days!!!

you compile with the -d directive, which indicatesthat the class file should be sent to the directory
you specify after the -d switch.
If your doing neither of these, your .class file
should be in the directory you compiled from.
Remember that when you run your application, you
should be running "java HelloWorldApp" not "java
HelloWorldApp.class", and that it is case sensitive,
so "java helloworldapp" will not work.Thanks very much limeybrit9! Though HelloworldApp.class still does not appear in the original directory. However, I created a new directory and I tried luckily and succeded to use the -d switch after which I specified the new directory. HelloWorldApp.class appeared in the new directory. And I could run it and it worked! Piece of cake, ha? Just kidding...
Thank you again,
Igor

Absolute beginner: Artistic (Chalk/Charcoal) Brush

First of all I apologize for this silly question; I am an absolute beginner (minus absolute) in Illustrator. I would have googled my problem but I don't even know what to google, to be honest. Here it is:
I drew a heart and would like to stroke it with a charcoal/chalk brush. I use a Wacom Intuos 4 tablet. When I stroke it (by selecting the path and clicking on the different brush samples in the brush library) the line "imitates" gesture drawing and does not stroke my shape with a unified (weight) line. Instead, it leaves a break between the end of my path and the end of the "gesture stroke. (The same thing happens with straight lines too: the stroke does not go up to the end of the line and often it does not start at the beginning of it.) I would also like it to be the same weight all along and not to get thinner in the end. Here is a picture of what I mean:
I know it is something really really basic but I can't figure out how to change this. Any help would be highly appreciated. And again, sorry for this absolute beginner question.

The path contains no data relating to your pressure or pen angle. It is just a uniform path. I’m not sure why Illustrator is not starting or ending at that point. It may be because the rectangular bounding box on the brush would overlap itself there. See what happens if you click on the point with the knife tool.
Here I used a Zapf Dingbats heart and converted to paths. On he left, the unmodified path. On the right, the path after clicking with the knife tool. This makes it an open path. You can still fill it if you want.

Absolute Beginner needs help

I've had my 30 GB color video iPod for a few hours, and feel totally lost.
I was able to connect it to my iMac, and the computer used iTunes to synch everything.
How do you turn it on or off? How do you stop it from playing music?
How do you set it up, or use the wheel to select stuff?
This is all very basic stuff, and I couldn't find the info in the help files or in this discussion forum.
Am I just plain dense?

To stop the iPod from automatically syncing with iTunes when you connect the iPod to the computer you will need to change some preferences.
Connect the iPod to the computer and then stop the iPod from syncing. While the iPod is still in iTunes i.e is still in the left column (sometimes it ejects the iPod when you stop it from syncing don't ask me why : /)
I will assume that you have the latest iTunes (if not you will eventually need to download it anyway) so all you will have to do is click on the iPod in the left column and click on the "Manually manage music and videos" box. Now you will have to drag songs/videos/playlists to the iPod.
To turn off your iPod simply hold the play button until it sleeps. Then you can put it on hold so it wont turn on accidently.
To select stuff... as in selecting a specific song? then navigate to the prefered song listing (songs or playlists artists etc) using the center button (sorry if this sounds obvious but you did say absolute beginner :P)
To stop a song selection from playing just push previous until you have gone past the first song. there may be easier ways but unless your playing 4000 songs its not very time-consuming
Hope this helps you out a bit look forward to some feedback and quires
This is probably covered in the links provided by b noir but this is just to focus on the specifics of your questions.
MP 2GHz 1GB RAM 2X 160HD X1900XT 24" LCD Mac OS X (10.4.8) PM G4 (Digital Audio) 1 GB Ram, Firewire/USB PCI card, Extra 2x 60GB HD

Data problem from DSO to cube

hi
i am facing data from problem from dso to cube
i am getting daat into dso
plant   material doc_num itemno qty
p1      m1           1              1         10
p1      m1           1               2         20
dso i am uisng key fields
doc_no
item_no
doc_year
data fields
material
plant
qty
while loading data into cube
its showing only
p1 m1 1 2 20
item 1 is missing
there is no iten num filed in my target field?
ple let me know ur idea.

Hi,
The problem is in your ODS/DSO.
In your ODS you have 'Doc_num' as key field.
For both Items 1 & 2, you have same key field ( Doc_Num) Value.
So, the first record will be over written by the second one. So from your ODS you will get only the latest record to the Cube.
If you want to send both doc_nums to cube, you need to bring doc_num to the data fields area of ODS.
Hope this helps.
Cheers
Praveen

I have set up my new iPad 2 on my windowsn 7 computer, but experienced syncing problems from the start. It seems that it doesn't recognize the iPad, although it appears in iTunes.It only gives set up as new or restore options.

I have set up my new iPad 2 on my computer (Windows 7), but experienced syncing problems from the start. It seems that although my iPad is regognized in iTunes as it appears there, it only gives met the options to set up as a new iPad or restore from the backup, no synching options. What do I do?

File>Devices>Transfer Purchases will transfer the itunes purchases to your ocmputer.
You should sync your ipod to your computer regularly.

Communication problem from the vpn-anyconnect to easy-vpn-remote

Hi Team,
I have a communication problem from the vpn-anyconnect to easy-vpn-remote, I´ll explain better bellow and see the attached
topology:
1) VPN Tunnel between HQ to Branch Office - That´s OK
2) VPN Tunnel between Client AnyConnect to HQ - That´s OK
The idea is that the Client Anyconnect is to reach the LAN at Branch Office, but did not reach.
The communication is stablished just when I start a session (icmp and/or rdp) from Branch Office to the Client AnyConnect,
in this way, the communication is OK, but just during a few minutes.
Could you help me?
Bellow the IOS version and configurations
ASA5505 Version 8.4(7)23 (headquarters)
ASA5505 Version 8.4(7)23 (Branch)
**************** Configuration Easy VPN Server (HQ) ****************
crypto dynamic-map DYNAMIC-MAP 5 set ikev1 transform-set ESP-AES-256-SHA
crypto map outside-link-2_map 1 ipsec-isakmp dynamic DYNAMIC-MAP
crypto map outside-link-2_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map outside-link-2_map interface outside-link-2
access-list ACL_EZVPN standard permit 10.0.0.0 255.255.255.0
access-list ACL_EZVPN standard permit 192.168.1.0 255.255.255.0
access-list ACL_EZVPN standard permit 192.168.50.0 255.255.255.0
access-list ACL_EZVPN standard permit 10.10.0.0 255.255.255.0
group-policy EZVPN_GP internal
group-policy EZVPN_GP attributes
split-tunnel-policy tunnelspecified
split-tunnel-network-list value ACL_EZVPN
nem enable
tunnel-group EZVPN_TG type remote-access
tunnel-group EZVPN_TG general-attributes
default-group-policy EZVPN_GP
tunnel-group EZVPN_TG ipsec-attributes
ikev1 pre-shared-key *****
object-group network Obj_VPN_anyconnect-local
network-object 192.168.1.0 255.255.255.0
network-object 192.168.15.0 255.255.255.0
object-group network Obj-VPN-anyconnect-remote
network-object 192.168.50.0 255.255.255.0
object-group network NAT_EZVPN_Source
network-object 192.168.1.0 255.255.255.0
network-object 10.10.0.0 255.255.255.0
object-group network NAT_EZVPN_Destination
network-object 10.0.0.0 255.255.255.0
nat (inside,outside-link-2) source static Obj_VPN_anyconnect-local Obj_VPN_anyconnect-local destination static Obj-VPN-
anyconnect-remote Obj-VPN-anyconnect-remote no-proxy-arp route-lookup
nat (inside,outside-link-2) source static NAT_EZVPN_Source NAT_EZVPN_Source destination static NAT_EZVPN_Destination
NAT_EZVPN_Destination no-proxy-arp route-lookup
nat (outside-link-2,outside-link-2) source static Obj-VPN-anyconnect-remote Obj-VPN-anyconnect-remote destination static
NAT_EZVPN_Destination NAT_EZVPN_Destination no-proxy-arp route-lookup
**************** Configuration VPN AnyConnect (HQ) ****************
webvpn
enable outside-link-2
default-idle-timeout 60
anyconnect-essentials
anyconnect image disk0:/anyconnect-win-2.5.2014-k9.pkg 1
anyconnect profiles Remote_Connection_for_TS_Users disk0:/remote_connection_for_ts_users.xml
anyconnect enable
tunnel-group-list enable
access-list split-tunnel standard permit 192.168.1.0 255.255.255.0
access-list split-tunnel standard permit 192.168.15.0 255.255.255.0
access-list split-tunnel standard permit 10.0.0.0 255.255.255.0
group-policy clientgroup internal
group-policy clientgroup attributes
wins-server none
dns-server value 192.168.1.41
vpn-tunnel-protocol ssl-client
split-tunnel-policy tunnelspecified
split-tunnel-network-list value split-tunnel
default-domain value ipconnection.com.br
webvpn
anyconnect keep-installer installed
anyconnect ssl rekey time 30
anyconnect ssl rekey method ssl
anyconnect profiles value Remote_Connection_for_TS_Users type user
anyconnect ask none default anyconnect
tunnel-group sslgroup type remote-access
tunnel-group sslgroup general-attributes
address-pool vpnpool
authentication-server-group DC03
default-group-policy clientgroup
tunnel-group sslgroup webvpn-attributes
group-alias IPConnection-vpn-anyconnect enable
object-group network Obj_VPN_anyconnect-local
network-object 192.168.1.0 255.255.255.0
network-object 192.168.15.0 255.255.255.0
object-group network Obj-VPN-anyconnect-remote
network-object 192.168.50.0 255.255.255.0
object-group network NAT_EZVPN_Source
network-object 192.168.1.0 255.255.255.0
network-object 10.10.0.0 255.255.255.0
object-group network NAT_EZVPN_Destination
network-object 10.0.0.0 255.255.255.0
nat (inside,outside-link-2) source static Obj_VPN_anyconnect-local Obj_VPN_anyconnect-local destination static Obj-VPN-
anyconnect-remote Obj-VPN-anyconnect-remote no-proxy-arp route-lookup
nat (inside,outside-link-2) source static NAT_EZVPN_Source NAT_EZVPN_Source destination static NAT_EZVPN_Destination
NAT_EZVPN_Destination no-proxy-arp route-lookup
nat (outside-link-2,outside-link-2) source static Obj-VPN-anyconnect-remote Obj-VPN-anyconnect-remote destination static
NAT_EZVPN_Destination NAT_EZVPN_Destination no-proxy-arp route-lookup

Hi,
the communication works when you send traffic from easyvpn branch side because it froms the IPSEC SA for local subnet and anyconnect HQ pool. The SA will only form when branch initiates the connection as this is dynamic peer connection to HQ ASA.
when there no SA between branch and HQ for this traffic, HQ ASA has no clue about where to send the traffic from anyconnect to branch network.
I hope it explains the cause.
Regards,
Abaji.

User provisioning problem from OIM 10g to Siebel CRM

Hi Team,
I am facing User provisioning problem from OIM 10g to Siebel CRM.Please find the log details.
Running Get Attribute Mapping
Running Siebel Create User
<com.siebel.common.common.CSSException>
<Error><ErrorCode>8716601</ErrorCode> <ErrMsg>Socket had incorrect word size: 0.(SBL-JCA-00313)</ErrMsg></Error>
</com.siebel.common.common.CSSException>
        at com.siebel.om.conmgr.Connection.readPacket(Connection.java:550)
        at com.siebel.om.conmgr.Connection.run(Connection.java:286)
        at java.lang.Thread.run(Thread.java:619)
[CMGR FATAL] Error: <com.siebel.common.common.CSSException>
<Error><ErrorCode>8716601</ErrorCode> <ErrMsg>Socket had incorrect word size: 0.(SBL-JCA-00313)</ErrMsg></Error>
</com.siebel.common.common.CSSException> connection:1
<com.siebel.common.common.CSSException>
<Error><ErrorCode>8716601</ErrorCode> <ErrMsg>Socket had incorrect word size: 0.(SBL-JCA-00313)</ErrMsg></Error>
</com.siebel.common.common.CSSException>
        at com.siebel.om.conmgr.Connection.readPacket(Connection.java:550)
        at com.siebel.om.conmgr.Connection.run(Connection.java:286)
        at java.lang.Thread.run(Thread.java:619)
[CMGR FATAL] Error: <com.siebel.common.common.CSSException>
<Error><ErrorCode>8716601</ErrorCode> <ErrMsg>Socket had incorrect word size: 0.(SBL-JCA-00313)</ErrMsg></Error>
</com.siebel.common.common.CSSException> connection:1ERROR,22 Aug 2013 12:58:27,689,[XL_INTG.SIEBEL],====================================================
ERROR,22 Aug 2013 12:58:27,689,[XL_INTG.SIEBEL],com.thortech.xl.integration.siebel.utils.SiebelConnection : createSiebelConnection() : Siebel Connection Exception:Could not open a session in 4 attempts. {1}(SBL-JCA-00200)
ERROR,22 Aug 2013 12:58:27,689,[XL_INTG.SIEBEL],====================================================
ERROR,22 Aug 2013 12:58:27,689,[XL_INTG.SIEBEL],====================================================
ERROR,22 Aug 2013 12:58:27,689,[XL_INTG.SIEBEL],com.thortech.xl.integration.siebel.proxy.SiebelProxyEmployeeProvisionManager : createSiebelConnection() : BaseException: Siebel Connection JDB Exception: Could not open a session in 4 attempts. {1}(SBL-JCA-00200)
ERROR,22 Aug 2013 12:58:27,689,[XL_INTG.SIEBEL],====================================================
ERROR,22 Aug 2013 12:58:27,689,[XL_INTG.SIEBEL],====================================================
ERROR,22 Aug 2013 12:58:27,689,[XL_INTG.SIEBEL],com.thortech.xl.integration.siebel.provision.SiebelUtilEmployeeProvisionManager : createEmployee() : BaseException: Siebel Connection JDB Exception: Could not open a session in 4 attempts. {1}(SBL-JCA-00200)
ERROR,22 Aug 2013 12:58:27,689,[XL_INTG.SIEBEL],====================================================
Regards,
Ravi.

Hi
I facing the same error message as yours, using OIM 11g R2
Are you able solve it ?
Please share
Many Thanks !!!

Mapping problem:from E1EDK14-ORGID to PORDCR102-PUR_GROUP

Mapping problem:from E1EDK14-ORGID to PORDCR102-PUR_GROUP
E1EDK14 occurs 4 times in the source sys:
1   E1EDK14-QUALF = '014'
     E1EDK14-ORGID = 'YP01'      <= purchase organization
2   E1EDK14-QUALF = '009'
     E1EDK14-ORGID = '001'      <= purchase group
3   E1EDK14-QUALF = '013'
     E1EDK14-ORGID = 'NB'      <= document type
4   E1EDK14-QUALF = '011'
     E1EDK14-ORGID = 'C999'      <= company code
I always want to copy "E1EDK14-ORGID = '001'" to PORDCR102-PUR_GROUP.
I have a solution which works but not perfect:
E1EDK14-ORGID=>copyvalue[1]=>PORDCR102-PUR_GROUP
I want to have the perfect mapping as follow:
IF E1EDK14-QUALF = '009'.
E1EDK14-ORGID = '001' => PORDCR102-PUR_GROUP
ENDIF.
I did it in the data flow editor as follow:
/PORDCR102/IDOC/E1PORDCR1/E1BPMEPOHEADER/PUR_GROUP=
ifWithoutElse([keepss=false]stringEquals
(removeContexts(/ORDERS05/IDOC/E1EDK14/QUALF=),
const([value=009])), /ORDERS05/IDOC/E1EDK14/ORGID=)
But the result in the target sys is always 'YP0'(The first E1EDK14-ORGID)
How to solve this problem?
Thanks
ming yu

Hi,
Try like this.
E1EDK14-QUALF   --------
Constant(009) ----------------   EqualsS ---------------
                                                             And(Boolean Function)     ------ IfWithoutElse -- PORDCR102-PUR_GROUP
E1EDK14-ORGID -------                                                      E1EDK14-ORGID ----------------
Constant(001) --------------   EqualsS ------------------
Regards,
P.Venkat

Outlook problem from an absolute beginner

Similar Messages

Maybe you are looking for